Littelfuse Automotive and CVP Transportation Catalog 2012

Littelfuse Automotive and CVP Transportation Catalog 2012
As the world's #1 brand in circuit protection Littelfuse offers the broadest
and deepest portfolio of circuit protection products and a global network
of technical support, backed by more than 85 years of application design
expertise. For all of your circuit protection needs visit our Technical Resources
center at www.littelfuse.com/technical-resources
 Application Notes
 Application Testing
 SPICE Models
 Local Technical Support
CIRCUIT
PROTECTION
SOLUTIONS FOR
AUTOMOTIVE
APPLICATIONS
 Reference Designs
 Product Samples
 Technical Articles
 Certification Documents
 Data Sheets
WWW.LITTELFUSE.COM
Automotive applications. Littelfuse circuit protection expert staff can assist you in designing circuit protection for your
most demanding applications. Solutions for over-current applications as well as over-voltage applications are available
from Littelfuse.
Low Current Distribution (LCD) MICRO2, MICRO3, LP MINI, MINI, ATOF, MAXI, MCASE, LP JCASE, JCASE
High Current Distribution (HCD) MIDI, BF1, MEGA, CF
Advanced Power Systems High-voltage and customized fusing solutions
Battery Cable Protection (BCP) CABLE PRO and BF-Inline products for mounting directly inline as part of a
high-power cable assembly
Fuse, Relay and Specialty Modules Modular system for constructing custom fuse and relay boxes for
low volume applications
Power Distribution FLEC Customizable pre-tooled junction boxes
Accessories For assembly and mounting, shunts, fuse pullers, fuse holders terminals, terminal locks etc.
or more information, please contact your authorized Littelfuse product representative
F
or visit our website at www.littelfuse.com
© 2012 Littelfuse, Inc.
Specifications descriptions and illustrative material in this literature are as accurate as known at the time of publication,
but are subject to changes without notice. Visit www.littelfuse.com for most up-to-date technical information.
FORM NO. AA101
Revision Code: AA101-v1E-0912
Automotive • Commercial Vehicle Products (CVP) Circuit Protection Solutions
Littelfuse is the world leader in circuit protection. We offer an extensive selection of circuit protection technologies for
Our offering of automotive circuit protection solutions encompasses a wide range of applications:
Powertrain
Safety
Comfort
Automotive • Commercial Vehicle Products (CVP)
Infotainment
Fuse Box
Power Supply
Lighting
Engine Management
Transmission Control
Cooling Fan
Water Pump
ABS
EPAS
Air Bag
Chassis Control
Window Lift
Sun Roof
Door Lock
Power Seat
HVAC
Dashboard
Navigation
In-Car Entertainment
Wire Harness
Generator
HID Headlight
Headlight Leveling
Directional Lighting
Power Distribution Centers
© 2012 Littelfuse • Transportation Products Catalog
91
Flexible Electrical Center
92
FLEC ™ Flexible Electrical Center
92
Hard-Wired Power Distribution Centers 94
HWB60-SEALED Hard-Wired Modules (MINI Style)
94
Bussed Power Distribution Modules 95
5 Position Block Fuse Holder for ATO ® Style Blade Fuse
2+2 Mini® Fuse and Jcase ® Holder
96
97
Junction Blocks 98
High Current Single Stud Feed-Thru
Single Stud Junction Blocks (Feed-Thru and Non-feed-Thru)
99
100
POWR-BLOK™ Modules
102
POWR-BLOK ™ Modules: Introduction Fuse Modules Relay Modules Specialty Modules
Assembly/Mounting Accessories
Terminals
Terminal Loks
103
104
109
114
119
123
130
www.littelfuse.com
Power Distribution Centers
FLEC™ Flexible Electrical Center
Specifications
Input Terminals:(3) M8 or 3/8” input studs rated up to 100A
each (*total input current dependent on
customer-provided load matrix)
Output Terminals:
(38) 1.5mm blades (for 15A fuse)
(38) 2.8mm blades (for 25A fuse)
Termination:Uses Delphi GT series terminals and connectors
(sealed)
Input Stud Torque:
12-18Nm
Mounting Torque:
6-8Nm
Materials:UL94V-0 Thermoplastic with RoHS-compliant
PCB; High-temp silicone cover gasket and stud
caps; Plated-Cu terminals
Operating Temperature Range: -40°C to 85°C
Ingress Protection Rating:
IP67
Features and Benefits
Cover:Twist-on cover design allows for single-hand
installation and removal
PCB:Multi-layer board allows for custom circuit
configurations
Base: Includes vent for pressure equalization
High Component Density: Accepts multiple component footprints (i.e.
MINI®, JCASE ®, PCB-mount, etc.) in one
package; PCB-mount components can be
installed directly to PCB (i.e. diodes, resistors,
relays) for space and cost savings
InputProtection: MEGA® fuse can be installed across M8 input
studs to protect multiple circuits in FLEC TM;
Additional MEGA-FLEX holder can be
interlocked to FLEC TM for added fuse protection
Accessories:Fuse puller included in cover
Input stud caps provided (red and black)
Spare MINI® fuse positions available in cover
Cover tether included
Description
The Flexible Electrical Center (FLEC TM) is a configurable power
distribution module for the heavy transportation (OTB) market. It
accommodates circuit protection components in a compact, sealed
footprint. Your custom electrical schematic is programmed into the
FLEC TM to create a simple “plug-and-play” system.
Each program is reviewed by Littelfuse for proper ratings, thermal
loading, and application. The FLEC TM mates to an industry standard
connection system to provide a robust solution for heavy duty
environments.
Contact Littelfuse for further information on FLEC TM.
www.littelfuse.com
92
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
FLEC™ Flexible Electrical Center
Dimensions
Dimensions in mm
INTERLOCKS FOR
MEGA-FLEX FUSE
HOLDER (02981028HXFC)
CONNECTOR NOTATION
6.7
50.8
103.7
196.8
181.6
150.3
50.8
6.7
8.5
(2)
BASE PLATE VENT
153.3
6.5
6.5
6.7
OPTIONAL INSIDE
COVER LABEL
168.5
GASKET
INSTALLED
IN COVER
FUSE PULLER
HOLDER (PULLER
SHOWN INSTALLED)
84.5
W/COVER
180.0
(3) HEX NUTS
& LOCK WASHERS
47.1
W/O COVER
© 2012 Littelfuse • Transportation Products Catalog
2.7
(3) M8 OR 3/8-16
INPUT STUDS
(STUD CAPS AVAILABLE)
(4) SPARE FUSE
HOLDERS
(MINI STYLE)
COVER TETHER
(3) 19.6
43.2
93
www.littelfuse.com
Power Distribution Centers
HWB60-SEALED Hard-Wired Modules (MINI Style)
Specifications
Max Fuse Size:
30A
# of Cavities:
60
Compatible Relay Types: 280 footprint micro & mini
Mounting Torque: 6-8Nm using M6 bolts and hardware
Materials: UL 94V-0 glass-filled thermoplastic with
silicone gasket
Labels: Module & cover options
Accessories: Spare fuse and fuse puller holder; Cover
tether; TPA
Mating Terminals and Seals: Delphi Metri-Pack 280 Sealed Female
Wire Sizes: 0.35 - 5.0mm2
Dimensions
Dimensions in mm (subject to change)
154.0
138.0
132.2
Description
The HWB60 is a hard-wired module for use with 280 style
components (i.e. mini-fuses, relays, diodes, resistors, etc.) It
features 60 cavities creating a high density fuse module with a
compact footprint. Without internal bussing, it allows the flexibility
of custom circuitry by the end user. Wires simply plug into the
back of the module using sealed Delphi Metri-Pack Series 280
tanged terminals.
36.0
(4) MOUNTING
LOCATIONS
USING M6 BOLTS
COVER
TETHER
SLOT
R8.0
112.5
128.7
Sealing in the cover and around the wires allow for use in extreme
environments. Dovetail features on the sides of unit allow the user
to stack multiple HWB60’s together to increase their circuit
protection package. These same dovetails can also be used to
attach an add-on component that holds a fuse puller and spare
fuses. Cover tethers and TPAs (terminal position assurance locks)
are also available.
68.5
81.4
5.0
INTERLOCKS FOR MOUNTING
MULTIPLE HWB60s TOGETHER
Alternative component footprints may be available. Contact
Littelfuse for more information.
Ratings
7.8 TYP.
58.2
52.0
Part Number
Description
PDM21001LXM
Complete Assembly (Base, Cover,
Gasket, and 6 TPAs shipped bulk)
868-163
Base
873-029
Cover
901-315
Gasket
883-083
TPA
www.littelfuse.com
TPA SHOWN
INSTALLED
94
8.1 TYP.
© 2012 Littelfuse • Transportation Products Catalog
Bussed Power Distribution Modules
5 Position Block Fuse Holder for ATO® Style Blade Fuse
96
2+2 MINI Fuse & JCASE Holder
97
®
© 2012 Littelfuse • Transportation Products Catalog
95
®
www.littelfuse.com
Power Distribution Centers
5 Position Block Fuse Holder
for ATO® Style Blade Fuse
Ordering Information
Part Number
Package Size
03500417TXN
10
03500417Z
120
03500418TXN
10
03500418Z
180
03500419TXN
10
03500419Z
150
03500420TXN
10
03500420Z
250
Dimensions
Dimensions in mm
Description
Use with ATO fuses up to 15A. Available in 5 pole unit with
removable clear protective cover. Available in side or bottom
positioned 1/4” Q.C. terminal configurations. Unit with bottom Q.C.
terminals includes detachable side mounting brackets.
®
Ratings
Part Number
Description
Fuse Rating
03500418_
ATO® block 5 positions, vertical contacts
15 A
03500419_
®
ATO block 5 positions, horizontal + vertical contacts
15 A
03500420_
ATO® block 5 positions, P.C. Board contacts
15 A
03500417_
ATO® block 5 positions, horizontal contacts
15 A
Corresponding fuse links see Section “Blade Fuses.”
www.littelfuse.com
96
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
2+2 mini® fuse & jcase® holder
Specifications
Mounting Torque: 6-8Nm
Input Stud Torque:
6-8Nm
Materials: Body & Cover:
UL 94V-0 Thermoplastic
Stud: Zinc-plated steel
Bus Bar: Tin-plated copper
Gasket: Silicone
Mating Terminals & Seals Series:
JCASE ®: Delphi Ducon 6.3 Sealed Male
MINI®: Delphi Metri-Pack 280 Sealed Female
Dimensions
Dimensions in mm
(Subject to change)
86.5
Description
66.86
The 2+2 MINI® Fuse & JCASE® Holder accommodates two MINI®
fuses and two JCASE® fuses. The use of these fuse types
provides an amperage range of 2-60A in a compact package. The
four fuses are bussed internally to the main input power stud. This
allows the user to reduce wiring by making one input connection
to power four fuse circuits.
5
33.53
The 2+2 holder is a sealed module enabling it to be used in heavy
duty environments. A stud cap is provided to protect input stud
area from accidental shorts. TPAs are also included to provide
secondary locking of each wire terminal.
Ratings
Part Number
Description
BPDMA104HXF1
Assembly (base, cover & gasket assembled;
hardware, and TPAs shipped bulk)
(2) ∅6.25
77.25
M6 INPUT
STUD
73.5
© 2012 Littelfuse • Transportation Products Catalog
97
www.littelfuse.com
Junction Blocks
High Current Single Stud Feed-Thru
Single Stud Junction Blocks (Feed-Thru & Non-feed-Thru)
www.littelfuse.com
98
99
100
© 2010 Littelfuse • Transportation Products Catalog
Power Distribution Centers
High Current Single Stud Feed-Thru
Specifications
Rating:
Locknut Torque:
Body Mounting Nut Torque:
Materials:
Operating Temperature Range:
400A
54.2 Nm
13.6 Nm
Body-Nylon 66 (120˚C)
Contact - Copper 110
Studs - Zinc-plated steel
Locknut - Zinc-plated steel
Body nut - Nylon 66
Stud caps - PVC
-40˚C - 125˚C
Dimensions
Dimensions in mm
Description
R16.7
[R0.66]
Our 3/8” pass-thru stud has a high electrical rating and low
resistance due to a large cross-sectional contact area. It also uses
highly conductive materials to outperform the competition.
This pass-thru stud boasts high installation torque values to allow
the use of large cable sizes for high current applications. Stud caps
are included to protect from accidental shorts.
STUD CAPS
USED ON BOTH
SIDES OF BLOCK
The pass-thru stud is available with red or black body and stud cap
to help color-code circuits in the vehicle. A plastic body locknut
ensures quick and easy firewall-mount installation without the
need for additional hardware.
28.7
[1.13]
TYPICAL PANEL CUTOUT
38.1
[1.50]
19.1
[0.75]
6.4
[0.25]
38.1
[1.50]
Ratings
3/8-16 BOLTS
Part Number
Color
JBPT0001Z
Red
JBPT0002Z
Black
© 2012 Littelfuse • Transportation Products Catalog
PLASTIC BODY
LOCKNUT
99
3/8-16 NUT
USED ON BOTH
SIDES OF BLOCK
www.littelfuse.com
Power Distribution Centers
single stud junction blocks (Feed-Thru & Non-feed-Thru)
Specifications
Materials:
Hardware: Thread Sizes: Operating Temperature Range:
Body: UL 94V-0 Thermoplastic
Stud: Stainless steel
Conductive Core: Plated copper
Lockwashers and nuts available;
Protective stud caps available (red or black to match body color)
Various available options
-40˚C - 125˚C
Description
Junction Blocks are used as electrical connection points for the
distribution of power or ground. These blocks can simplify cabling
& architectures, and serve as convenient power tap points. Feedthru versions enable firewall-mount applications and help reduce
wiring costs and overall space required for cable routing.
Junction blocks are available in various thread sizes and lengths.
Lock washers and nuts are included with each block. Stud caps
are also available for protection from accidental shorts.
Contact Littelfuse for more sizes not shown.
www.littelfuse.com
100
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution
JunctionCenters
Blocks
single stud junction blocks (Feed-Thru & Non-feed-Thru)
Dimensions
Dimensions in mm
A
K
A
A
K
K
47.6
19.1
19.1
28.6
(2) L
MOUNTING
HOLES
(4) L
MOUNTING
HOLES
(2) L
MOUNTING
HOLES
B
C
B
B
C
D
H
C
D
D
H
H
E
E
E
F
F
F
J
J
J
G
G
G
THREAD SIZE
THREAD SIZE M
M
THREAD SIZE M
FIGURE 2
FIGURE 1
FIGURE 3
PART NUMBER
FIGURE
A
B
C
D
E
F
G
H
J
K
L
M
COLOR
JBPT2P01ZXR
1
69.8
38.1
31.7
31.7
28.6
9.5
28.6
4.8
4.8
50.8
ø5.6 hole with ø11.2 C'bore x 4.1deep
1/2-13
RED
JBPT2N02ZXB
1
69.8
36.6
31.7
38.1
28.6
9.5
NONE
4.8
NONE
50.8
ø5.6
1/2-13
BLACK
JBPT2N03ZXB
1
69.8
36.3
31.7
38.1
28.6
9.5
NONE
4.8
NONE
50.8
ø5.6
5/16-18
BLACK
JBPT3P01ZXB
2
52.4
23.8
17.5
22.2
17.5
7.9
23.8
1.6
1.6
33.3
ø5.6 hole with ø10.4 C'bore x 3.6 deep
3/8-16
BLACK
JBPT3P02ZXB
2
52.4
22.2
15.9
15.9
28.6
7.9
23.8
1.6
1.6
33.3
ø5.6 hole with ø10.4 C'bore x 3.6 deep
3/8-16
BLACK
JBPT3N03ZXB
2
54.0
24.9
15.9
22.2
17.5
7.9
NONE
1.6
NONE
34.9
ø5.6 hole with ø9.4 C'bore x 3.6 deep
3/8-16
BLACK
JBPT3N03ZXR
2
54.0
24.9
15.9
22.2
17.5
7.9
NONE
1.6
NONE
34.9
ø5.6 hole with ø9.4 C'bore x 3.6 deep
3/8-16
RED
JBPT4P01ZXB
3
52.4
17.5
11.2
15.9
17.5
7.9
17.5
1.6
1.6
33.3
ø5.6 hole with ø10.4 C'bore x 3.6 deep
1/4-20
BLACK
© 2012 Littelfuse • Transportation Products Catalog
101
www.littelfuse.com
POWR-BLOK™ Modules
Powr-BlokTM Modules: Introduction
103
Fuse Modules 104
Relay Modules 109
Specialty Modules
114
Assembly/Mounting Accessories
119
Terminals123
Terminal Loks
www.littelfuse.com
102
122
© 2010 Littelfuse • Transportation Products Catalog
Power Distribution Centers
POWR-BLOK ™ Modules
How to use the Littelfuse
POWR-BLOKS system
Description
The Littelfuse POWR-BLOKS™ system gives you unlimited
flexibility to design electrical distribution systems. It’s a totally
modular way to build your own junction box. POWR-BLOKS are
perfect for applications where space or vehicle function demand a
tailor made approach. The Littelfuse POWR-BLOKS can be
modified, re-sized, reconfigured or added to at any time.
1.Identify the electrical system parameters
- Space availability and requirements
- Circuit protection components
- Relay and flasher components
- Components for special needs
2.Select the Littelfuse POWR-BLOKS components. Lay out the
electrical panel as designed. Then determine the appropriate
type and quantity of POWR-BLOKS modules, BLOCK LOKS and
TERMINAL LOKS you need.
3.Build the panel by row. POWR-BLOKS can be assembled
without special tools. Assemble the block from the rear by
placing all modules face down on a flat surface. POWR-BLOKS
should be designed by row, either going across or up and down.
4.Use BLOK LOKS to interconnect modules. BLOK LOKS are used
to connect and stack POWR-BLOKS modules. Press together a
row of modules and insert green BLOK LOKS until they snap into
place. Repeat this procedure to interlock all assembled rows.
Mechanical Strength for Any Application
5.Add mounting modules. Once a POWR-BLOKS panel is
assembled, add mounting modules that are most suitable for
your application. Mounting options include surface mounting
legs, a side mounting bracket and a mounting module with three
different sized spacers.
POWR-BLOKS modules are molded from glass reinforced nylon
for dimensional stability, excellent rigidity, high and low
temperature resistance and tensile strength:
Specifications
Test
Voltage Rating
Temperature range
Durability
Drop Thermal Shock
Mechanical Shock
Fluid Compatibility 6.Plug in terminated wiring. Wire your POWR-BLOKS panel and
plug in the terminated wires, then insert the optional matching
TERMINAL LOKS devices. Littelfuse TERMINAL LOKS are
designed to fit special POWR-BLOKS modules and inserted in
the same manner as BLOK LOKS.
POWR-BLOKS ™ Standard
48VDC
-40°C to +125°C
Minimum 50 cycles of engagement/
disengagement
1.22 meters onto wooden platform
5 Cycles from -40°C to +125°C
50g in each of 3 mutually perpendicular axis
Gasoline, diesel fuel, motor oil, antifreeze,
brake fluid, ATF
The information and illustrations given in this catalogue are
believed to be reliable and accurate. Littelfuse makes no
warranties as to their accuracy or completeness, and disclaims any
liability in connection with their use. Littelfuse’s only obligations
are those in the standard terms of sale for this product and
Littelfuse will not be liable for any consequential or other damages
arising out of the use or misuse of this product. Littelfuse reserves
the right to make changes to the contents hereof without notice.
It is suggested that at the time of inquiry Littelfuse Sales
personnel be contacted directly for verification of published
specifications and product availability.
*Max. Current Indication
The information listed as Max. current indication is to be used as a
guideline only. The maximum allowable rating of the fuses used
depends on design criteria such as maximum current, nominal
current the duration for which the circuits are energized, as well as
external factors as ambient temperature. All modules should
therefore be tested as an assembly, and users should make their
own evaluation to determine the suitability of the product for their
specific applications.
© 2012 Littelfuse • Transportation Products Catalog
103
www.littelfuse.com
Fuse Modules
www.littelfuse.com
104
2-Position ATO® Style Fuse and Circuit Breaker Module
105
4-Position ATO® Style Fuse and Circuit Breaker Module
105
7-Position ATO® Style Fuse and Circuit Breaker Module
106
4-Position MINI® Style Fuse Module
106
6-Position MINI® Style Fuse Module
107
8-Position MINI® Style Fuse Module
107
2-Position MAXI™ Style Fuse Module
108
4-Position MAXI™ Style Fuse Module
108
© 2010 Littelfuse • Transportation Products Catalog
Power Distribution Centers
2-Position ATO® Style Fuse and Circuit Breaker Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540501Z (40 pcs.)
60A
Terminals
Terminal Loks
(see according section)
(see according section)
Type 1 or 7
Type 4, 5 or 6
4-Position ATO® Style Fuse and Circuit Breaker Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540502Z (20 pcs.)
120A
© 2012 Littelfuse • Transportation Products Catalog
Terminals
105
Terminal Loks
(see according section)
(see according section)
Type 1 or 7
Type 4, 5, 6 or 7
www.littelfuse.com
Power Distribution Centers
7-Position ATO® Style Fuse and Circuit Breaker Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540503Z (20 pcs.)
120A
Terminal Loks
Terminals
(see according section)
(see according section)
Type 1 or 7
Type 4 or 5
4-Position MINI® Style Fuse Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540532Z (40 pcs.)
60A
www.littelfuse.com
Terminals
106
Terminal Loks
(see according section)
(see according section)
Type 6
–
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
6-Position MINI® Style Fuse Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540543Z (40 pcs.)
60A
Terminals
Terminal Loks
(see according section)
(see according section)
Type 8
–
8-Position MINI® Style Fuse Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540544Z (40 pcs.)
60A
© 2012 Littelfuse • Transportation Products Catalog
Terminals
107
Terminal Loks
(see according section)
(see according section)
Type 8
–
www.littelfuse.com
Power Distribution Centers
2-Position MAXI™ Style Fuse Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540549Z (40 pcs.)
80A
Terminal Loks
Terminals
(see according section)
(see according section)
Type 2
Type 8
4-Position MAXI™ Style Fuse Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540505Z (20 pcs.)
160A
www.littelfuse.com
Terminals
108
Terminal Loks
(see according section)
(see according section)
Type 2
Type 8
© 2012 Littelfuse • Transportation Products Catalog
Relay Modules
© 2012 Littelfuse • Transportation Products Catalog
109
1-Position ISO Relay Module
110
2-Position ISO Relay Module 110
3-Position Micro Relay Module
111
1-Position 9 Pin Relay Module
111
2-Position 280 Micro Relay + 2 Position MINI® Style Fuse
112
1-Position Power Relay Module
112
2-Pin Flasher Module
113
www.littelfuse.com
Power Distribution Centers
1-Position ISO Relay Module
Alternative for: 3 pin flasher module
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540506Z (40 pcs.)
–
Terminal Loks
Terminals
(see according section)
(see according section)
Type 3
Type 1
2-Position ISO Relay Module
Alternative for: 3 pin flasher module
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540536Z (20 pcs.)
–
www.littelfuse.com
Terminals
110
Terminal Loks
(see according section)
(see according section)
Type 3
Type 1
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
3-Position Micro Relay Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540507Z (20 pcs.)
03540507Z (20 pcs.)
Terminals
Terminal Loks
(see according section)
(see according section)
Coil and normally closed contacts
Type 5
Type 3
Normally open contacts
Type 3
Type 2
1-Position 9 Pin Relay Module
Dimensions
Dimensions in mm
Ratings
Part Number
Terminals
Max. Current Indication
Terminal Loks
(see according section)
(see according section)
03540542Z (40 pcs.)
5 “Inner” pins
Type 3
Type 1
03540542Z (40 pcs.)
4 “Outer” pins
Type 6
–
© 2012 Littelfuse • Transportation Products Catalog
111
www.littelfuse.com
Power Distribution Centers
2-Position 280 Micro Relay + 2 Position MINI® Style Fuse
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540551Z (40 pcs.)
Max. current indication 30A
Terminal Loks
Terminals
(see according section)
(see according section)
Type 8
–
1-Position Power Relay Module
Dimensions
Dimensions in mm
Ratings
Part Number
Terminals
Max. Current Indication
Terminal Loks
(see according section)
(see according section)
03540535Z (40 pcs.)
Coil
Type 3
Type 1
03540535Z (40 pcs.)
Contacts
Type 4
–
www.littelfuse.com
112
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
2-Pin Flasher Module
Dimensions
Dimensions in mm
Ratings
Part Number
Max. Current Indication
03540508Z (40 pcs.)
–
© 2012 Littelfuse • Transportation Products Catalog
Terminals
113
Terminal Loks
(see according section)
(see according section)
Type 3
Type 1
www.littelfuse.com
Specialty Modules
www.littelfuse.com
114
Blank Module
115
2-Position Blank Module
115
Power Tap Module
116
2-Stud Assembly Module
116
4-Stud Assembly Module
117
2-Position Push Button Circuit Breaker Module
117
Storage Module/Drawer Insert
118
Splash Proof Cover for: 4-Position MINI® Fuse Module
118
© 2010 Littelfuse • Transportation Products Catalog
Power Distribution Centers
Blank Module
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540520Z (40 pcs.)
–
2-Position Blank Module
Dimensions
Dimensions in mm
Ratings
© 2012 Littelfuse • Transportation Products Catalog
115
Part Number
Remarks
03540550Z (20 pcs.)
–
www.littelfuse.com
Power Distribution Centers
Power Tap Module
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540539Z (40 pcs.)
M8 Tread Metric
03540512Z (100 pcs.)
1/ 4 inch - 20 thread
03540513Z (100 pcs.)
5/16 inch - 18 thread
2-Stud Assembly Module
Dimensions
Dimensions in mm
Ratings
www.littelfuse.com
116
Part Number
Remarks
03540537Z (20 pcs.)
M6 Thread, Metric
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
4-Stud Assembly Module
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540538Z (20 pcs.)
M6 Thread Metric
2-Position Push Button Circuit Breaker Module
Dimensions
Dimensions in mm
Ratings
© 2012 Littelfuse • Transportation Products Catalog
117
Part Number
Remarks
03540504Z (20 pcs.)
–
www.littelfuse.com
Power Distribution Centers
Storage Module/Drawer Insert
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540521Z (20 pcs.)
Body
03540522Z (20 pcs.)
Drawer
Splash Proof Cover for: 4-Position MINI® Fuse Module
Dimensions
Dimensions in mm
Ratings
www.littelfuse.com
118
Part Number
Remarks
03540534Z (20 pcs.)
Cover
03540533Z (20 pcs.)
Lock
09130085Z (20 pcs.)
Seal
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
Assembly/Mounting Accessories
Assembly Accessories—BLOK-LOKS™120
© 2012 Littelfuse • Transportation Products Catalog
119
Mounting Accessories—Mounting Standoffs
120
Mounting Accessories—Mounting Module
121
Mounting Leg
121
Mounting Accessories—Flush Mounting Leg
122
Side Mounting Bracket
122
www.littelfuse.com
Power Distribution Centers
Assembly Accessories—Blok Loks™
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540523Z (250 pcs.)
–
Mounting Accessories—Mounting Standoffs
Dimensions
Dimensions in mm
Ratings
www.littelfuse.com
120
Part Number
Remarks
03540515Z (10 pcs.)
0.75 Inch / 19mm
03540516Z (10 pcs.)
1 Inch / 25.4mm
03540517Z (10 pcs.)
1.25 Inch / 31.7mm
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
Mounting Accessories—Mounting Module
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540514Z (40 pcs.)
–
Mounting Leg
Dimensions
Dimensions in mm
Ratings
© 2012 Littelfuse • Transportation Products Catalog
121
Part Number
Remarks
03540541Z (50 pcs.)
2.50 Inch / 63.5mm
03540518Z (50 pcs.)
3 Inch / 76.2mm
www.littelfuse.com
Power Distribution Centers
Mounting Accessories—Flush Mounting Leg
Dimensions
Dimensions in mm
Ratings
Part Number
Remarks
03540519Z (50 pcs.)
–
Side Mounting Bracket
Dimensions
Dimensions in mm
Ratings
www.littelfuse.com
122
Part Number
Remarks
03540540Z (50 pcs.)
–
© 2012 Littelfuse • Transportation Products Catalog
Terminals
© 2012 Littelfuse • Transportation Products Catalog
123
Terminal Type 1
124
Terminal Type 2
125
Terminal Type 3
125
Terminal Type 4
126
Terminal Type 5
126
Terminal Type 6
127
Terminal Type 7
127
Terminal Type 8
128
Starter Terminals
129
www.littelfuse.com
Power Distribution Centers
Terminal Type 1
Terminal Loks
Description
Wire Diam.
Type of terminal loks
For part number: 354501 / 354502 / 354503
0.50 - 2 mm2
For part number: 354501 / 354502 / 354503
0.50 - 2 & 3.3 - 5.3 mm
5
For part number: 354501 / 354502
0.50 - 2 mm2
6
For part number: 354502
0.50 - 2 mm
7
4
2
2
Ratings
Part Number
Description
913-070 (Reeled per 2200 pcs)
0913070001 (Single per 250 pcs)
913-071 (Reeled per 2200 pcs)
913-071XS (Reeled per 2200 pcs)
0913071001 (Single per 250 pcs)
913-072 (Reeled per 2200 pcs)
913-072XS (Reeled per 2200 pcs)
0913072001 (Single per 250 pc)
913-058 (Reeled per 4500 pcs)
0913058001 (Single per 250 pcs)
913-059 (Reeled per 4500 pcs)
0913059001 (Single per 250 pcs)
913-060 (Reeled per 4500 pcs)
0913060001 (Single per 250 pcs)
* Spring clip material:
www.littelfuse.com
Heavy Duty + spring clip*
Heavy Duty + spring clip*
Heavy Duty + spring clip*
Heavy Duty + spring clip*
Standard Duty
Standard Duty
Standard Duty
Wire Diam.
0.5-0.8 mm² / 18-20AWG
0.5-0.8 mm² / 18-20AWG
Material
Brass
1.33-2.09 mm² / 14-16AWG
Brass
1.33-2.09 mm² / 14-16AWG
Silver plated copper
1.33-2.09 mm² / 14-16AWG
3.32-5.37 mm² / 10-12AWG
Brass
3.32-5.37 mm² / 10-12AWG
Silver plated copper
3.32-5.37 mm² / 10-12AWG
Brass
0.5-0.8 mm² / 18-20AWG
0.5-0.8 mm² / 18-20AWG
1.33-2.09 mm² / 14-16AWG
1.33-2.09 mm² / 14-16 AWG
3.32-5.37 mm² / 10-12AWG
3.32-5.37 mm² / 10-12AWG
Brass
Brass
Brass
Stainless steel
124
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
Terminal Type 2
Terminal Loks
Description
Wire Diam.
Type of terminal loks
For part number:
354505
0,50 - 2 mm2
8
Ratings
Part Number
913-063 (Reeled per 1200 pcs)
0913063001 (Single per 250 pcs)
913-064 (Reeled per 1200 pcs)
0913064001 (Single per 250 pcs)
913-068 (Reeled 1200 pcs)
0913068001 (Single per 250 pcs)
Description
Female 8.0 mm
Female 8.0 mm
Female 8.0 mm
Wire Diam.
Material
0.82-1.33 mm² / 18-16AWG
0.82-1.33 mm² / 18-16AWG
2.09-3.32 mm² / 14-12AWG
2.09-3.32 mm² / 14-12AWG
5.37mm² / 10AWG
5.37mm² / 10AWG
Silver plated brass
Silver plated brass
Silver plated brass
Terminal Type 3
Terminal Loks
Description
Wire Diam.
Type of terminal loks
For part number:
354506 / 354508 /
354535 / 354536
–
1
For part number:
354505
–
2
Ratings
Part Number
913-053 (Reeled per 2000 pcs)
0913053001 (Single per 250 pcs)
913-253 (Reeled per 3000 pcs)
913-065 (Reeled per 2100 pcs)
0913065001 (Single per 250 pcs)
913-265 (Reeled per 2500 pcs)
913-055 (Reeled per 1900 pcs)
0913055001 (Single per 250 pcs)
913-255 (Reeled per 15000 pcs)
© 2012 Littelfuse • Transportation Products Catalog
Description
Wire Diam.
0.5-0.8 mm² / 18-20AWG
–
0.5-0.8 mm² / 18-20AWG
–
0.5-1.00 mm² (metric)
1.33-2.09 mm² / 14-16AWG
–
1.33-2.09 mm² / 14-16AWG
–
1.1-2.50 mm² (metric)
3.32-5.37 mm² / 10-12AWG
–
3.32-5.37 mm² / 10-12AWG
–
4.0-6.0 mm² (metric)
125
Material
Tin plated brass
Tin plated brass
Tin plated brass
Tin plated brass
Tin plated brass
Tin plated brass
www.littelfuse.com
Power Distribution Centers
Terminal Type 4
Ratings
Part Number
913-073 (Reeled per 2000 pcs)
0913073001 (Single per 250 pcs)
913-074 (Reeled per 1000 pcs)
0913074001 (Single per 250 pcs)
Description
Wire Diam.
3.0-6.0 mm²/10-12AWG
Female
3.0-6.0 mm²/10-12AWG
6.0-10.0 mm²/8-10AWG
Female
6.0-10.0 mm²/8-10AWG
Material
Tin plated Brass
Tin plated Brass
Terminal Type 5
Ratings
Part Number
913-067 (Reeled per 3500 pcs)
0913067001 (Single per 250 pcs)
913-066 (Reeled per 3000 pcs)
0913066001 (Single per 250 pcs)
www.littelfuse.com
Description
Wire Diam.
0.82-1.33 mm²/16-18AWG
Female
0.82-1.33 mm²/16-18AWG
2.09-3.32 mm²/12-14AWG
Female
2.09-3.32 mm²/12-14AWG
126
Material
Tin plated silicon bronze
Tin plated silicon bronze
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
Terminal Type 6
Ratings
Part Number
913-772 (Reeled per 2500 pcs)
0913772001 (Single per 250 pcs)
913-773 (Reeled per 2500 pcs)
0913773001 (Single per 250 pcs)
913-774 (Reeled 2000 pcs)
0913774001 (Single per 250 pcs)
Description
Wire Diam.
0.5-0.8 mm²/18-20AWG
Female
0.5-0.8 mm²/18-20AWG
1.33-2.09 mm²/14-16AWG
Female
1.33-2.09 mm²/14-16AWG
3.32-5.37 mm²/10-12AWG
Female
3.32-5.37 mm²/10-12AWG
Material
Tin plated brass
Tin plated brass
Tin plated brass
Terminal Type 7
Ratings
Part Number
Description
Wire Diam.
Material
09130075Z (Per 20 pcs)
Bus bar 2 position
5.0-8.0 mm²/8-10AWG
Copper
09130076Z (Per 20 pcs)
Bus bar 4 position
5.0-8.0 mm²/8-10AWG
Copper
09130077Z (Per 20 pcs)
Bus bar 7 position
5.0-8.0 mm²/8-10AWG
Copper
© 2012 Littelfuse • Transportation Products Catalog
127
www.littelfuse.com
Power Distribution Centers
Terminal Type 8
Ratings
Part Number
913-769 (Reeled per 4200 pcs)
0913769001 (Single per 250 pcs)
913-770 (Reeled per 1000 pcs)
0913770001 (Single per 250 pcs)
www.littelfuse.com
Description
Wire Diam.
0.5-1.0 mm²
Female
0.5-1.0 mm²
1.5-2.5 mm²
Female
1.5-2.5 mm²
128
Material
Part.Gold plated Brass
Tin plated bronze
© 2012 Littelfuse • Transportation Products Catalog
Power Distribution Centers
Starter Terminals
Description
The starter terminal series are cable lugs for heavy-duty
applications such as starter motors and battery connections.
Ratings
Part Number
09130633LXN (50 pcs)
09130633Z (1250 pcs)
09130634LXN (50 pcs)
09130634Z (600 pcs)
09130635LXN (50 pcs)
09130635Z (400 pcs)
09130636LXN (50 pcs)
09130636Z (200 pcs)
09130637LXN (50 pcs)
09130637Z (150 pcs)
09130638LXN (50 pcs)
09130638Z (100 pcs)
09130639LXN (50 pcs)
09130639Z (50 pcs)
09130640LXN (50 pcs)
09130640Z (600 pcs)
09130641LXN (50 pcs)
09130641Z (300 pcs)
09130642LXN (50 pcs)
09130642Z (200 pcs)
09130643LXN (50 pcs)
09130643Z (150 pcs)
09130644LXN (50 pcs)
09130644Z (100 pcs)
09130645LXN (50 pcs)
09130645Z (125 pcs)
09130646LXN (50 pcs)
09130646Z (75 pcs)
mm2
Mounting Hole
Width (mm)
Material
Plating
Ref.
2.5-6.0
6.5 mm
11
Cu
Sn
2906
6.0-15
8.4 mm
15
Cu
Sn
2910
10 -25
8.4 mm
15
Cu
Sn
2916
16-35
10.5 mm
19
Cu
Sn
29025
25-50
10.5 mm
19
Cu
Sn
29035
35-70
10.5 mm
19
Cu
Sn
29050
50-95
13.5 mm
22
Cu
Sn
29070
16
6.4 mm
11
Cu
Sn
2916 HK
25
8.4 mm
15
Cu
Sn
29025 HK
35
8.4 mm
15
Cu
Sn
29035 HK (8.4)
35
10.5 mm
19
Cu
Sn
29035 HK (10.5)
50
8.4 mm
17
Cu
Sn
29050 HK (8.4)
50
10.5 mm
19
Cu
Sn
29050 HK (10.5)
70
10.5 mm
21
Cu
Sn
29070 HK
© 2012 Littelfuse • Transportation Products Catalog
129
www.littelfuse.com
Terminal Loks
Terminal Lok Type 1 through 8
www.littelfuse.com
130
131
© 2010 Littelfuse • Transportation Products Catalog
Power Distribution Centers
Terminal Loks
Terminal Lok Type 5
Terminal Lok Type 1
03540528Z (250 pcs.)
03540524Z (250 pcs.)
Terminal Lok Type 6
Terminal Lok Type 2
03540529Z (100 pcs.)
03540525Z (100 pcs.)
Terminal Lok Type 7
Terminal Lok Type 3
03540530Z (100 pcs.)
03540526Z (100 pcs.)
Terminal Lok Type 8
Terminal Lok Type 4
03540531Z (100 pcs.)
03540527Z (250 pcs.)
© 2012 Littelfuse • Transportation Products Catalog
131
www.littelfuse.com
Fuse Holders
www.littelfuse.com
132
Inline Fuse Holders 133
PCB Fuse Holders
142
Stackable/Panel Mount Fuse Holders
150
Bolt-Down Fuse Holders and Assemblies 159
© 2012 Littelfuse • Transportation Products Catalog
Inline Fuse Holders
Inline Splashproof Fuse Holder for MINI® Style Blade Fuse
134
Inline Fuse Holder for ATO® Style Blade Fuse
135
Inline Splashproof Fuse Holder for ATO® Style Blade Fuse
135
Add-A-Circuit MINI® Style136
© 2012 Littelfuse • Transportation Products Catalog
133
Add-A-Circuit ATO® Style
136
Fuse Holder for MAXI® Style Blade Fuse
137
MAXI® Components
137
Splash Resistant Fuse Holder for MAXI® Style Blade Fuse
138
Splash Resistant MAXI® Components
138
Inline Fuse Holder for MAXI® Style Blade Fuse
139
Inline Fuse Holder for JCASE® Style Fuses
140
www.littelfuse.com
Fuse Holders
Inline SPLASHproof Fuse Holder
for MINI® Style Blade Fuse
Specifications
Housing:
Out of thermoplastic (UL 94-V0, heat-resistant)
Color:Black
Ordering Information
Part Number
Package Size
0FHM000xLXN
50
0FHM000xZXJ
1000
Description
Used with MINI / FK1 Fuse. Includes protective cover for harsh
environment. This product is compatible with a MINI diode.
Dimensions
Dimensions in mm
17.00±0.25
22±0.25
18±0.25
14±0.25
13±2
13±2
94±5
Ratings
56±1.5
94±5
Part Number
Description
Fuse Rating
0FHM0001_
14AWG/2.1mm2 stranded black wire
20 A
0FHM0002_
12AWG/3.3mm2 stranded orange wire
30 A
Wire length, color and diameter can be customized upon request.
Customization requires minimum order quantities depending on nature of modifications.
www.littelfuse.com
134
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Inline Fuse Holder for ATO® Style Blade Fuse
Dimensions
Dimensions in mm
Ratings
Description
Used with ATO®/ FKS Fuse. Supplied with two 4” / 102mm wire leads.
Ordering Information
Part Number
Package Size
0FHA0001ZXJ
1000
0FHA0002ZXJ
1000
Part Number
Description
Fuse Rating
0FHA0001_
16AWG/1.3mm2 stranded black wire
20 A
0FHA0002_
12AWG/3.3mm stranded orange wire
30 A
2
Wire length, color and diameter can be customized upon request.
Customization requires minimum order quantities depending on
nature of modifications. Please contact your sales representative
for details.
Inline Splashproof Fuse Holder
for ATO® Style Blade Fuse
Dimensions
Dimensions in mm
Description
Ratings
Used with ATO ® / FKS Fuse. Supplied with two 4” / 102mm wire
leads. Includes protective cover for harsh environment.
Ordering Information
Part Number
Package Size
FHAC0001ZXJ
1000
FHAC0002ZXJ
1000
© 2012 Littelfuse • Transportation Products Catalog
Part Number
Description
Fuse
Rating
FHAC0001ZXJ
16AWG/1.3mm2 stranded black wire
20 A
FHAC0002ZXJ
12AWG/3.3mm2 stranded orange wire
30 A
Wire length, color and diameter can be customized upon request.
Customization requires minimum order quantities depending on
nature of modifications. Please contact your sales representative
for details.
135
www.littelfuse.com
Fuse Holders
Add-A-Circuit MINI® Style
Ordering Information
Part Number
Package Size
0FHM0200Z
50
0FHM0200S
20
Ratings
Part Number
Description
Fuse Rating
0FHM0200_
Fusetap and holder for
installing additional
accessories without splicing
10 A
Description
Extension board for an additional fuse protected tap from an
existing MINI size socket. The 2 fuses for the existing and the new
circuit are oriented horizontally.
Add-A-Circuit ATO® Style
Ordering Information
Part Number
Package Size
0FHA0200Z
50
0FHA0200S
20
Ratings
Part Number
Description
Fuse Rating
0FHA0200_
Fusetap and holder for
installing additional
accessories without splicing
10 A
Description
Extension board for an additional fuse protected tap from an
existing ATO size socket. The 2 fuses for the existing and the new
circuit are oriented horizontally.
www.littelfuse.com
136
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Fuse Holder for MAXI® Style Blade Fuse
Ordering Information
Part Number
Package Size
01520001TXN
10
01520001U
500
Dimensions
Dimensions in mm
152900
Description
This fuse holder provides an efficient, simple installation method
for MAXI ® / FK3-Style Fuse applications.
152001
Ratings
Part Number
Description
Fuse
Rating
01520001TXN940
Assortment: Fuse Holder with
screws and terminals - 10 pcs.
60 A
01520001TXN941
Assortment: Fuse Holder, Cover
with screws and terminals - 10 pcs.
60 A
MAXI® Components
Ratings
Ordering Information
Part Number
Description
Part Number
01520001_
Fuse Holder
01520001TXN
01520900_
Cover
09130653_
09130654_
09130550_
Terminals for wire
Ø 2.5 - 6 mm2
Terminals for wire
Ø 5 - 10 mm2
Screws Ø 5.3 mm, M 5x8
© 2012 Littelfuse • Transportation Products Catalog
137
Package Size
10
01520900TXN
10
01520900H
100
01520900U
500
09130550LXN
50
09130550Z
1
09130653LXN
50
09130653Z
1500
09130654LXN
50
09130654Z
1000
www.littelfuse.com
Fuse Holders
Splash Resistant Fuse Holder
for MAXI® Style Blade Fuse
Ordering Information
Part Number
Package Size
01520003TXN
10
279.6800.0001
10
279.6800.0002
100
01520003U
500
Dimensions
Dimensions in mm
Ratings
Description
The Inline Splash Resistant Fuse Holder provides an efficient,
simple installation method for MAXI ® / FK3-style fuse applications
in harsh under-the-hood environments
Part Number
Description
Assortment: Fuse Holder 01520003
with terminals, seals and cover for
4-6mm² - 10 pcs.
Assortment: Fuse Holder 01520003
01520003TXN942 with terminals, seals and cover for
6-10mm² - 10 pcs.
Assortment: Fuse Holder 279.6800.000
279.6850.0402
with terminals, seals and cover for
4mm² - 10 pcs.
Assortment: Fuse Holder 279.6800.000
279.6850.0602
with terminals, seals and cover for
6-10mm² - 10 pcs.
Assortment: Fuse Holder
279.6850.1602
279.6800.000 with terminals, seals
and cover for 16mm² - 10 pcs.
01520003TXN941
* PA66-GF30:heat resistant
UL 94-V0: self extinguishing
Fuse
Rating
60 A
60 A
80 A
80 A
80 A
Splash Resistant MAXI® Components
Ratings
Ratings
Part Number
Description
Fuse
Rating
Part Number
279.6800.000_
Fuse Holder UL 94-V0 *
80 A
0913728001
01520003_
Fuse Holder PA66-GF30*
–
09130728TXN
01520903_
Cover
–
868-905
–
08680905TXN
–
868-906
–
08680906TXN
0913726001
09130726TXN
0913727001
09130727TXN
www.littelfuse.com
Loose terminals for wire
Ø 2.5 - 4 mm² - 300 pcs
Loose terminals for wire
Ø 2.5 - 4 mm² - 10 pcs
Loose terminals for wire
Ø 4 - 6 mm² - 300 pcs
Loose terminals for wire
Ø 4 - 6 mm² - 10 pcs
Description
Loose terminals for wire
Ø 6 - 10 mm² - 300 pcs
Loose terminals for wire
Ø 6 - 10 mm² - 10 pcs
Wire seals for wire
Ø 2.5 - 6 mm², bulk - 1000 pcs
Wire seals for wire
Ø 2.5 - 6 mm² - 10 pcs
Wire seals for wire
Ø 6 - 10 mm², bulk - 1000 pcs
Wire seals for wire
Ø 6 - 10 mm² - 10 pcs
Fuse
Rating
–
–
–
–
–
–
–
138
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Inline Fuse Holder for MAXI® Style Blade Fuse
Ordering Information
Part Number
Package Size
MAHC0001ZXJ
100
MAHC0001TXJ
10
Description
Dimensions
Supplied with two 5” leads - 6 gauge wire for up to 60A MAXI®/
FK3 Fuse applications, this Inline Fuse Holder also provides a
protective cover for harsh under-the-hood environments.
Mounting hole also permits easy bulkhead installation.
Dimensions in mm
Ratings
© 2012 Littelfuse • Transportation Products Catalog
139
Part Number
Description
Fuse Rating
MAHC0001ZXJ
6AWG black wire
60 A
www.littelfuse.com
Fuse Holders
Inline Fuse Holder for JCASE® Style Fuses
Specifications
Maximum Voltage Rating:
Maximum Current Rating:
Cable Insulation
Operating Temperature Range:
Max. Fuse Insertion Force:
58V
See table below.
GXL, 125˚C
-40˚C to +125˚C
49N
Ordering Information
Part Number
Package Size
0FHJxxxxG
250
FHJCxxxxG
250
HLJCxxxxG
250
0FHJxxxxL
50
FHJCxxxxL
50
HLJCxxxxL
50
Description
This product is an Inline fuse holder for use with either standard or
Low Profile JCASE® fuses, 20A - 60A. It offers size and weight
savings compared to MAXI ® fuseholders, and has an optional
protective cover for splash resistance. Standard product will have
two 102mm red wire leads. Wire length and insulation color can
be customized upon request. Tinned wires also available upon
request. All customizations have minimum order requirements.
Contact Littelfuse sales representative for details.
There are two available mounting options: One version with
mounting brackets, and one without.
Ratings
Part Number
Description
Cover
Mounting
Wire Size
Fuse Rating
0FHJ1001_
Standard JCASE Holder
None
Standard Thru-Hole
10AWG
40 A max
0FHJ1002_
Standard JCASE Holder
None
Standard Thru-Hole
8AWG
60 A max
0FHJ2001_
Standard JCASE Holder
None
Mounting Bracket
10AWG
40 A max
0FHJ2002_
Standard JCASE Holder
None
Mounting Bracket
8AWG
60 A max
FHJC1001_
Standard JCASE Holder
Yes
Standard Thru-Hole
10AWG
40 A max
FHJC1002_
Standard JCASE Holder
Yes
Standard Thru-Hole
8AWG
60 A max
FHJC2001_
Standard JCASE Holder
Yes
Mounting Bracket
10AWG
40 A max
FHJC2002_
Standard JCASE Holder
Yes
Mounting Bracket
8AWG
60 A max
HLJC1001_
Low Profile JCASE Holder
Yes
Standard Thru-Hole
10AWG
40 A max
HLJC1002_
Low Profile JCASE Holder
Yes
Standard Thru-Hole
8AWG
40 A max
HLJC2001_
Low Profile JCASE Holder
Yes
Mounting Bracket
10AWG
40 A max
HLJC2002_
Low Profile JCASE Holder
Yes
Mounting Bracket
8AWG
40 A max
www.littelfuse.com
140
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Inline Fuse Holder for JCASE® Style Fuses
Dimensions
Dimensions in mm
Ø5.5
25
40
18
MOUNTING BRACKET OPTION
Mounting bracket only included with XXXX2000 series.
0.8
25
13.5
LOW-PROFILE
FUSE OPTION
25
STANDARD JCASE
FUSE OPTION
21.3
2.5
5.5
18
12.8
9
TYP.
102
© 2012 Littelfuse • Transportation Products Catalog
50
102
141
www.littelfuse.com
PCB Fuse Holders
www.littelfuse.com
142
PCB Mount Fuse Holder for MINI® Style Blade Fuse
143
PCB Mount Fuse Holder for MINI® Style Blade Fuse (125V) 145
FLR PCB Fuse Holder for ATO® Style Blade Fuse Rated 80V
146
FLR PCB Fuse Holder for ATO® Style Blade Fuse Rated 58V
147
FKH Fuse Holder with 90˚ Connection for ATO® Style Blade
Fuse Rated 80V
148
PCB Fuse Clip for ATO® Style Blade Fuse
149
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
PCB Mount Fuse Holder for MINI® Style Blade Fuse
UL 15A
CSA 10A (32V)
Part Number
01530007_
01530031_
01530008_
01530032_
01530009_
01530033_
Description
Fuse Rating
15 A
Horizontal Mount
20 A
15 A
Single vertical Mount
(or End Unit)
20 A
15 A
Stackable vertical Mount
20 A
Ordering Information
Part Number
Description
The MINI® Fuse PCB Fuse Holders bring the reliability and
availability of the plug-in 32V MINI® Fuse to the circuit board.
Vertical and horizontal mounting of units is offered. The Fuse
Holder has “standoffs” to accommodate board washing and
incorporates a unique “board lock” anchor to maintain a firm
mechanical bond to the PCB.
0153007_
Package Size
015300xLXN
50
015300xZ
500
01530033xZ
5000
0153008_
0153031_
.680"
.300"
.170"
.015"
.042"
.30"
.31"
REF.
.068" TYP.
.300"
.050"
TYP.
.050"
TYP.
.149"
TYP.
.150"
.300"
.300"
.150"
.082"
.180"
.068" TYP.
P.C.B. FOOTPRINT
P.C.B. FOOTPRINT
®
®
®
®
32 V
.508" REF.
15 A
10 A
F
.180"
.235"
REF.
BOARD
EDGE
SHOWN WITH 297 SERIES
® FUSE INSTALLED
MINI
© 2012 Littelfuse • Transportation Products Catalog
143
www.littelfuse.com
Fuse Holders
PCB Mount Fuse Holder for MINI® Style Blade Fuse
0153009_
0153032_
.300"
.680"
.508"
0153033_
.160"
F
32 V
®
®
®
®
15 A
10 A
.152"
.30"
.042"
.753"
.062" REF.
PCB BOARD
.090"
SHOWN WITH 297 SERIES
MINI® FUSE INSTALLED
.149"
TYP.
.300" TYP.
.068"
TYP.
.300"
.150"
.050"
TYP. .068"TYP.
P.C.B. FOOTPRINT
www.littelfuse.com
144
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
PCB Mount Fuse Holder for MINI® Style Blade Fuse
Rated 125V
Specifications
Housing:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, copper alloy, tinned
Color:Black
Ordering Information
Part Number
178.6764.0001
Package Size
100
Description
Fuse holder for MINI/ FK1 fuses for PCB applications. The FL1
Fuse Holder can be mounted in a row of nearly any number. The
terminals fit into a 7.62 mm pitch.
Dimensions
Dimensions in mm
Ratings
Part Number
Description
Contact Temperature
178.6764.0001
Complete
max. 130°C
The FL1-Fuse Holder can be mounted in a row in nearly any number.
The terminals of the holder will also fit into a 7.62 mm pitch.
© 2012 Littelfuse • Transportation Products Catalog
145
www.littelfuse.com
Fuse Holders
FLR PCB Fuse Holder for ATO® Style Blade Fuse Rated 80V
Specifications
Housing:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, soldering terminals
(4 pins each), copper alloy, silver plated
Color:Black
Ordering Information
Part Number
Package Size
178.6165.xxx1
100
178.6165.xxx2
500
Dimensions
Dimensions in mm
Description
PCB Fuse Holder for ATO / FKS size fuse-links. For through hole
soldering. Rated voltage 80V.
Ratings
Part Number
Description
Contact Temperature
178.6165.000_
Complete
max. 130°C
Corresponding fuse links see Section “Blade Fuses.”
www.littelfuse.com
146
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
FLR PCB Fuse Holder for ATO® Style Blade Fuse rated 58V
Specifications
Housing:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, soldering terminals
(4 pins each), copper alloy, tinned
Color:Black
Ordering Information
Part Number
178.4265.0002
Package Size
500
Dimensions
Dimensions in mm
Description
PCB Fuse Holder for 42V PowerNet with coding for TAC fuseslinks. For through hole soldering. Rated voltage 58V.
Ratings
Part Number
Description
Contact Temperature
178.4265.0002
Complete
max. 130°C
Corresponding fuse links see Section “Blade Fuses.”
© 2012 Littelfuse • Transportation Products Catalog
147
www.littelfuse.com
Fuse Holders
FKH Fuse Holder with 90˚ connection
for ATO® Style Blade Fuse Rated 80V
Specifications
Housing:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, soldering
contacts (2 pins), copper alloy, tinned
Color:Black
Ordering Information
Part Number
178.7017.0001
Description
Dimensions
Fuse Holder for ATO ® / FKS size fuses-links. 90° bended solderable
tin plated contacts. Rated voltage 80V.
Dimensions in mm
Package Size
100
Ratings
Part Number
Description
Contact Temperature
178.7017.0001
Complete
max. 130°C
Corresponding fuse links see Section “Blade Fuses.”
www.littelfuse.com
148
© 2012 Littelfuse • Transportation Products Catalog
Stackable and Panel Mount Fuse Holders
© 2012 Littelfuse • Transportation Products Catalog
149
Stackable Panel Mount Fuse Holder with Wire Leads
for ATO® Style Blade Fuse
150
ATO® Panel Mount Holder Components
150
Snap Mount Fuse Holder for ATO® Style Blade Fuse
151
Stackable Panel Mount Fuse Holder for
ATO® Style Blade Fuse
151
Panel-Mount Stackable Components 152
FH2 Stackable Block Fuse Holder
for ATO® Style Blade Fuse Rated 80V
153
FH2 Stackable Block Fuse Holder for
TAC® Style Blade Fuse Rated 58V
154
FKH Stackable Fuse Holder for ATO® Style Blade Fuse Rated 58V
155
FKH Stackable Fuse Holder
for ATO® Style Blade Fuse Rated up to 80V
156
Low Profile JCASE® Panel-Mount Fuse Holder
157
www.littelfuse.com
Fuse Holders
Stackable Panel Mount Fuse Holder
with Wire Leads for ATO® Style Blade Fuse
Ordering Information
Part Number
Package Size
01550xxxLXN
50
01550xxxZ
100
Dimensions
Dimensions in mm
Ratings
Description
Intended for use with 32V ATO ®/ FKS Fuses rated up to 20A or 30A.
Part Number
Description
Fuse Rating
01550300_
14AWG/2.1mm2 stranded black wire
20 A
01550400_
10AWG/5.3mm2 stranded orange wire
30 A
ATO® Panel Mount Holder Components
Dimensions
Dimensions in mm
Ratings
Part Number
Description
Fuse Rating
868-062-000
Housing only, color black - 2700 pcs.
–
913-008
913-008-001
913-007
913-007-001
www.littelfuse.com
150
Reeled Terminals A,
wire 14AWG/2.1mm2 -6000 pcs.
Singe Terminals A,
wire 14AWG/2.1mm2 -1000 pcs.
Reeled Terminals B,
wire 10AWG/5.3mm2 - 5000 pcs.
Singe Terminals B,
wire 10AWG/5.3mm2 -1000 pcs.
20A
20A
30A
30A
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Snap Mount Fuse Holder
for ATO® Style Blade Fuse
Ordering Information
Part Number
Package Size
01510001LXN
50
01510001F
200
Dimensions
Dimensions in mm
Ratings
Description
Intended for use with 32V ATO / FKS Fuses rated up to 20A.
Part Number
Description
Fuse Rating
01510001_
Snap-mount holder assembled,
color black
20 A
Part Number
Description
Fuse Rating
08680900LXN
Assortment: Holders with brackets and
terminals, color black - 50 pcs
20 A
Stackable Panel Mount Fuse Holder
for ATO® Style Blade Fuse
Dimensions
Dimensions in mm
Ratings
Description
Intended for use with 32V ATO / FKS Fuses rated up to 20A.
© 2012 Littelfuse • Transportation Products Catalog
151
www.littelfuse.com
Fuse Holders
Panel-Mount Stackable Components
Dimensions
Dimensions in mm
Ratings
Part Number
Description
Fuse Rating
868-900-010RM
Holder only, color black - 100 pcs.
–
868-900-020RM Brackets only, color black - 100 pcs.
09130900Z
www.littelfuse.com
152
Terminals loose,
wire 0.5 - 1.25 mm2 - 200 pcs.
–
–
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
FH2 Stackable Block Fuse Holder
for ATO® Style Blade Fuse Rated 80V
Specifications
Housing:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, crimp contacts,
copper alloy, tinned
Color:Black
Cover:
Thermoplastic (transparent)
Ordering Information
Part Number
Package Size
178.6105.0001
100
178.6105.0002
1000
178.6115.0001
100
178.6115.0002
1000
Dimensions
Dimensions in mm
Description
Blockholder for ATO / FKS size fuses-links. Attachable in X- and
Y-direction. Rated voltage 80V; crimp terminals.
Chart for row-mounting
10er/pcs. Block
Ratings
Part Number
Description
Contact Temperature
178.6105.000_
Complete with DFK 1.5 - 2.5 mm²
max. 130°C
178.6115.000_
Housing
–
178.6125.000_
Cover
–
178.6116.100_ *
DFK-Kontakte 0.5-1.0mm²
max. 130°C
178.6116.250_ *
Contacts 1.5-2.5mm²
max. 130°C
178.6116.600_ *
Contacts 4.0-6.0mm²
max. 130°C
* Crimping tool available on request.
Corresponding fuse links see Section “Blade Fuses.”
© 2012 Littelfuse • Transportation Products Catalog
153
www.littelfuse.com
Fuse Holders
FH2 Stackable Block Fuse Holder
for TAC® Style Blade Fuse Rated 58V
Specifications
Housing:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, crimp contacts,
copper alloy, tinned
Color:Black
Cover:
Thermoplastic (transparent)
Ordering Information
Part Number
Description
Blockholder for 42V PowerNet with coding for TAC® fuses-links.
Attachable in X- and Y-direction. Rated voltage 58V; crimp terminals.
Package Size
178.4205.0002
1000
178.4215.0002
1000
178.6116.xxx1
200
178.6116.xxx2
1000
178.6125.0001
100
178.6125.0002
1000
Dimensions
Dimensions in mm
Chart for row-mounting
10er/pcs. Block
Ratings
Part Number
Description
Contact Temperature
178.4205.000_
Complete with DFK 1.5 - 2.5 mm²
max. 130°C
178.4215.000_
Housing
–
178.6125.000_
Cover
–
178.6116.100_ *
Complete with DFK 0.5 - 1.0 mm²
max. 130°C
178.6116.250_ *
Contacts 1.5-2.5mm²
max. 130°C
178.6116.600_ *
Contacts 4.0-6.0mm²
max. 130°C
www.littelfuse.com
154
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
FKH Stackable Fuse Holder
for ATO® Style Blade Fuse Rated 58V
Specifications
Housing + Adapter:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, soldering terminals
(4 pins each), copper alloy, tinned
Color:Black
Ordering Information
Part Number
Package Size
178.4250.0002
1000
178.4252.0002
1000
178.6116.xxx1
200
178.6116.xxx2
1000
178.619x.0001
100
Dimensions
Description
Dimensions in mm
Fuse Holder for 42V PowerNet with coding for TAC fuses-links.
Attachable in X - direction. Rated voltage 58V; crimp terminals.
with Adapter
Ratings
Part Number
Description
Contact Temperature
178.4252.0002
Complete
max. 130°C
178.4250.0002
Housing
–
178.6116.250_
Contacts 1.5 - 2.5 mm²
max. 130°C
178.6191.0001
Adapter right
–
178.6192.0001
Adapter left
–
Corresponding fuse links see Section “Blade Fuses.”
This FKH 58V Fuse Holder can be mounted in row in any number. The fixing adapters are not included in the Fuse Holder.
Please order the adapter separately.
© 2012 Littelfuse • Transportation Products Catalog
155
www.littelfuse.com
Fuse Holders
FKH Stackable Fuse Holder
for ATO® Style Blade Fuse Rated up to 80V
Specifications
Housing + Adapter:
Out of thermoplastic (UL 94-V0, heat-resistant)
Connections:
Leaf spring connector systems, soldering
terminals, copper alloy, tinned
Color:Black
Ordering Information
Part Number
Package Size
178.6152.0001
100
178.6150.0001
1000
178.6116.xxx1
200
178.6116.xxx2
1000
178.619x.0001
100
Dimensions
Description
Dimensions in mm
Fuse Holder for ATO ® / FKS size fuses-links. Attachable in
X - direction. Rated voltage up to 80V; crimp terminals.
with Adapter
Ratings
Part Number
Description
Contact Temperature
178.6152.000_
Complete with terminals
max. 130°C
178.6150.000_
Housing Only
–
178.6116.250_
Terminals of 1.5 - 2.5 mm²
max. 130°C
178.6152.250_
With 200 mm of 2.5 mm² wire loop
–
178.6191.0001
Adapter right
–
178.6192.0001
Adapter left
–
Corresponding fuse links see Section “Blade Fuses.”
This FKH-Fuse Holder can be mounted in row in any number. The fixing adapters are not included in the Fuse Holder.
Please order the adapter separately.
www.littelfuse.com
156
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Low Profile JCASE® Panel-Mount Fuse Holder
Dimensions
Dimensions in mm
Description
Used with LP JCASE® fuses up to 40A. Holder will use
12 AWG / 3 mm2 wire. Fuse not included.
Ratings
© 2012 Littelfuse • Transportation Products Catalog
157
Part Number
Description
Fuse Rating
0FHJ3003U
Low Profile JCASE®
Holder with soldering tabs
40 A max
www.littelfuse.com
Bolt-Down Fuse Holders & Assemblies
www.littelfuse.com
158
Fuse Holder for Midi®/BF1 Style Fuse
159
MIDI®/BF1 2 & 3-Way Fuse Holder
159
Inline MIDI® Fuse Holder 160
Bolt-Down Fuse Holders for MEGA® Style Fuse
161
Splash Resistant Fuse Holder for MEGA® Style Bolt-Down Fuse
161
MEGA®-FLEX Holder for MEGA® Fuses
162
Fuse Base for Fuse Strips Rated 80V for Single
164
Fuse Base for Fuse Strips Rated 80V for Double
165
Battery Clamp for CF8 Fuse Rated 58V
166
Insulating Nuts for CF8 Fuse
167
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Fuse Holder for midi® /BF1 Style Fuse
Dimensions
Dimensions in mm
(2)
Description
M5 torque: 4-5Nm
3.81
Ratings
Use with BF1 /MIDI ® fuses up to 200A. Includes protective cover.
Features interconnecting pins on side of fuse block for secure
multiple block configurations. Includes M5 threaded studs and hex
nuts with lock washers. Fuse not included.
Part Number
Description
Fuse Rating
04980900ZXT
330 pcs.
Holder with mounting
brackets - 264 pcs.
200 A
04980903ZXT
200 A
Corresponding fuses see Section “Bolt-Down Fuses.”
MIDI® /BF1 2 & 3-Way Fuse Holder
Dimensions
Dimensions in mm
M5 torque: 5Nn
Ratings
Description
Part Number
This splash-resistant fuse holder with cover can be flexible enough
to be used with 2 or 3 MIDI® fuses. A Snap-on fixes the sheet
metals in the holder. The holder includes M5 threaded bolts and
cover seal. Busbar and cable seals are optional. Fuse not included.
0HBF0001ZXBASE3
0HBF0001ZXBASE2
0HBF0001ZXCOVER
© 2012 Littelfuse • Transportation Products Catalog
159
Fuse
Rating
Description
Holder complete for 3 way
(includes M5 bolts & cover seal)
Holder complete for 2 way
(includes M5 bolts & cover seal)
Cover
200 A
200 A
--
www.littelfuse.com
Fuse Holders
Inline MIDI® Fuse Holder
Specifications
Max. Voltage Rating:
32 VDC
Max. Fuse Rating:
200A
Operating Temperature Range:
-40˚C to +125˚C
Max. Wire Size:
20mm2
M5 Torque Rating:
5Nm
Base/Cover Material:
UL 94V-0 glass-filled nylon
M5 Bolt Material:
Zinc-plated
M5 Nuts:Zinc-plated with nylock inserts
Dimensions
Dimensions in mm
Description
M5X0.8 BOLTS
The Inline MIDI ® fuseholder is designed for use with boltdown
MIDI® style fuses. It may be installed direcly inline with the cables
with no mounting required.
The Inline MIDI ® fuse holder can be used with heat shrink tubing
for applications requiring more splash resistance. The curved design
of the cover aids in prevention of tube-splitting during application.
43.0
16.5
19.0
Ratings
www.littelfuse.com
Part Number
Description
04980921GXM5
Assembly with hardware and cover installed (Zinc-plated steel)
498921-1
Cover-only
498921-2
Base only with hardware installed (Zinc-plated steel)
160
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Bolt-down Fuse Holders for MEGA® Style Fuse
Dimensions
Dimensions in mm
M8 torque: 12-18Nm
Ratings
Description
Use with MEGA® fuses up to 500A. Ideal for battery and alternator
connections and other heavy gauge cables requiring ultra high
current protection. Includes protective cover. Features interconnecting
pins on side of fuse block for secure multiple block configurations.
Includes M8 threaded studs and hex nuts with lock washers. Fuse
not included.
Part Number
Description
Fuse Rating
02981001ZXT
160 pcs.
500 A
Corresponding fuses see Section “Bolt-Down Fuses.”
Splash Resistant Fuse Holder
for MEGA® Style Bolt-Down Fuse
Dimensions
M8 torque: 12-18Nm
Dimensions in mm
Ratings
Description
Description
Fuse
Rating
298907-030
Holder
250 A
298907-040
Cover
–
Part Number
For use with MEGA® fuses the holder offers splash-resistant
protection for use in harsh environments.
Corresponding fuses see Section “Bolt-Down Fuses.”
© 2012 Littelfuse • Transportation Products Catalog
161
www.littelfuse.com
Fuse Holders
MEGA®-FLEX Holder for MEGA® Fuses
Specifications
Max. Voltage Rating:
Max. Current Rating:
Operating Temperature Range:
Wire Size:
Recommended Fuse Installation Torque:
Recommended Mounting (using M6 Screw/Washer):
Base Material:
Cover Material:
32 VDC
500A
-40˚C to +125˚C
70 - 8 mm2
12 - 18Nm
5Nm
UL94V0 Glass-filled PPA
UL94V0 Elastomer
Description
The MEGA® -FLEX fuse holder is used with the MEGA® style
bolt-down fuse, which is available up to 500A. This holder offers a
flexible cover, which allows cable entry from virtually any direction,
large wire size, and ring terminal stack up. Slots on the base allow
holder to be mounted with tie wraps. Dovetail features allow you
to interlock multiple MEGA® -FLEX fuse holders together for a
high power distribution block. Bus bars are avalable for multiple
holder applications.
Ratings
Part Number
Description
Material
(Studs and hardware)
02981028HXFCB
Base-only (No Hardware)
Zinc-Plated Steel
02981028HXFCC
Cover-only
Zinc-Plated Steel
02981028HXFC
Assembly
02981028HXFC-SS
Assembly
Stainless Steel
882-839-2
2-Position bus Bar
Tin-Plated Copper
882-839-3
3-Position bus Bar
Tin-Plated Copper
882-839-4
4-Position bus Bar
Tin-Plated Copper
882-839-5
5-Position bus Bar
Tin-Plated Copper
www.littelfuse.com
162
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
MEGA ® -FLEX Holder for MEGA ® Fuses
Dimensions
Dimensions in mm
© 2012 Littelfuse • Transportation Products Catalog
163
www.littelfuse.com
Fuse Holders
Fuse Base for Fuse Strips Rated 80V for Single
Specifications
Base:
Insulation material according to DIN 7708/1
Spring washer according ISO 4036
Hexagon nuts according to DIN 439
Washer according to DIN 125
Conducting Materials:
Copper wrought alloy
Color:Black
Ordering Information
Part Number
Package Size
177.57xx.0001
10
192.5710.0001
10
Description
Fuse base for fuse strips with 62 mm spacing. Up to 80V.
Dimensions
Dimensions in mm
Ratings
Part Number
Description
Contact Temperature
177.5701.0001
1) Fuse base
max. 425 A
177.5731.0001
2) Fuse base
max. 425 A
192.5710.0001
3) Phase barrier
–
Corresponding fuse strips see Section “Bolt-Down Fuses.”
www.littelfuse.com
164
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Fuse Base for Fuse Strips Rated 80V for Double
Specifications
Base:
Insulation material according to DIN 7708/1
Spring washer according ISO 4036
Hexagon nuts according to DIN 439
Washer according to DIN 125
Conducting Materials:
Copper wrought alloy
Color:Black
Ordering Information
Part Number
Package Size
177.57xx.0001
10
192.57xx.0001
10
Description
Fuse base for fuse strips with 62 mm spacing. Up to 80V.
Dimensions
Dimensions in mm
Ratings
Part Number
Description
Contact Temperature
177.5702.0001
1) Fuse base
max. 250 A
177.5741.0001
2) Fuse base
max. 250 A
192.5710.0001
3) Phase barrier
–
Corresponding fuse strips see Section “Bolt-Down Fuses.”
© 2012 Littelfuse • Transportation Products Catalog
165
www.littelfuse.com
Fuse Holders
Battery Clamp for CF8 Fuse Rated 58V
Specifications
Material:
Starting Torque:
Brass G-Cu Zn 33 Pb
10 Nm at batterypole, 12 Nm Compact Fuse
Ordering Information
Part Number
Package Size
255.1000.0001
100
255.2000.0001
50
Description
Battery clamp for CF8 Fuse links. Both battery clamps have an
integrated twisted protection for the CF8-fuse link.
Dimensions
Dimensions in mm
Ratings
Part Number
Description
Fuse Rating
255.1000.0001
Battery clamp 1 pole
max. 250 A (23+-5°C)
255.2000.0001
Battery clamp 2 pole
max. 250 A (23+-5°C)
CF8-fuses links only in conjuction with Insulating nuts 255.0808.0001, 255.0899.4001 or 255.0899.5001.
Corresponding CF8-fuse links see Section “Bolt-Down Fuses.” If the ring terminal makes contact with the terminal fuse stud, the fuse is
bypassed and is not protecting the circuit. Insert CF8-Fuse links only in conjunction with the insulating nut see next page.
www.littelfuse.com
166
© 2012 Littelfuse • Transportation Products Catalog
Fuse Holders
Insulating Nuts for CF8 Fuse
Specifications
Material:
Packaging Unit:
Thermoplastic, Duroplastic
Pos.1 = 250 pieces
Pos.2 + 3 = 100 pieces
Ordering Information
Part Number
Package Size
255.0808.xxx1
250
255.0899.xxx1
100
Description
Insulating nuts for CF8 Fuse links.
Dimensions
Dimensions in mm
Ratings
Part Number
Description
Contact Temperature
255.0808.0001
Insulating nut (Duroplastic)
max. 300 A (23°C+-5°C)
255.0899.4001
Insulating nut with locking hook 4.9 mm (Thermoplastic) (Red)
max. 150 A (23°C+-5°C)
255.0899.5001
Insulating nut with locking hook 5.9 mm (Thermoplastic) (Black)
max. 150 A (23°C+-5°C)
Corresponding fuse links see Section “Bolt-Down Fuses.”
If the ring terminal makes contact with the terminal fuse stud, the fuse is bypassed and is not protecting the circuit.
© 2012 Littelfuse • Transportation Products Catalog
167
www.littelfuse.com
Fuse Pullers
www.littelfuse.com
168
Pullers 169
Pullers / Tester
169
Fuse Puller - MINI® Fuse
170
© 2010 Littelfuse • Transportation Products Catalog
Fuse Pullers
Pullers
Ordering Information
Part Number
Package Size
165.0020.0002
00970021HXNVDL
00970021NXVDL
00970023HXN
00970023Z
00970024M
00970024Z
00970027LXN
00970027N
00970053Z
00970999P
500
100
5000
100
500
1000
7500
50
2000
1
2000
Ratings
Description
Allows for easy fuse removal and replacement.
Part Number
Description
165.0020.000_
00970021_
00970023_
00970024_
00970027_
00970053_
00970999_
ATO / MINI® / MAXI™ Style
ATO® / MINI® Style
ATO® / MINI® / Glass Style
MINI® Style
MAXI™ Style
JCASE® Style
ATO® Style
®
Puller / Tester
Dimensions
Dimensions in mm
Ordering Information
Description
Package Size
00970019X
10
Ratings
Conveniently and easily tests ATO ® and MINI® blade fuses
either in or out of the fuse block. Indicator light on tester
glows bright green when fuse is good. Fuse puller end allows
for easy fuse removal and replacement. 24V maximum.
© 2010 Littelfuse • Transportation Products Catalog
Part Number
169
Part Number
Description
00970019X
ATO® /MINI® Style
www.littelfuse.com
Fuse Pullers
Fuse Puller - mini® fuse
Specifications
Material:PBT
Ordering Information
Part Number
00970032Z
Description
This fuse puller is designed to allow for easy removal of MINI®
fuses and other MINI® style components. Its narrow profile
enables you to remove a fuse even when nested between two
larger components (i.e. relays.) The material used provides a
robust design that lasts through multiple fuse withdrawal cycles.
This puller is used primarily with the Littelfuse FLEC TM Flexible
Electrical Center, but can be used with any other junction box,
power distribution center or fuse holder that uses MINI®
components.
www.littelfuse.com
170
© 2010 Littelfuse • Transportation Products Catalog
As the world's #1 brand in circuit protection Littelfuse offers the broadest
and deepest portfolio of circuit protection products and a global network
of technical support, backed by more than 85 years of application design
expertise. For all of your circuit protection needs visit our Technical Resources
center at www.littelfuse.com/technical-resources
 Application Notes
 Application Testing
 SPICE Models
 Local Technical Support
CIRCUIT
PROTECTION
SOLUTIONS FOR
AUTOMOTIVE
APPLICATIONS
 Reference Designs
 Product Samples
 Technical Articles
 Certification Documents
 Data Sheets
WWW.LITTELFUSE.COM
Automotive applications. Littelfuse circuit protection expert staff can assist you in designing circuit protection for your
most demanding applications. Solutions for over-current applications as well as over-voltage applications are available
from Littelfuse.
Low Current Distribution (LCD) MICRO2, MICRO3, LP MINI, MINI, ATOF, MAXI, MCASE, LP JCASE, JCASE
High Current Distribution (HCD) MIDI, BF1, MEGA, CF
Advanced Power Systems High-voltage and customized fusing solutions
Battery Cable Protection (BCP) CABLE PRO and BF-Inline products for mounting directly inline as part of a
high-power cable assembly
Fuse, Relay and Specialty Modules Modular system for constructing custom fuse and relay boxes for
low volume applications
Power Distribution FLEC Customizable pre-tooled junction boxes
Accessories For assembly and mounting, shunts, fuse pullers, fuse holders terminals, terminal locks etc.
or more information, please contact your authorized Littelfuse product representative
F
or visit our website at www.littelfuse.com
© 2012 Littelfuse, Inc.
Specifications descriptions and illustrative material in this literature are as accurate as known at the time of publication,
but are subject to changes without notice. Visit www.littelfuse.com for most up-to-date technical information.
FORM NO. AA101
Revision Code: AA101-v1E-0912
Automotive • Commercial Vehicle Products (CVP) Circuit Protection Solutions
Littelfuse is the world leader in circuit protection. We offer an extensive selection of circuit protection technologies for
Our offering of automotive circuit protection solutions encompasses a wide range of applications:
Powertrain
Safety
Comfort
Automotive • Commercial Vehicle Products (CVP)
Infotainment
Fuse Box
Power Supply
Lighting
Engine Management
Transmission Control
Cooling Fan
Water Pump
ABS
EPAS
Air Bag
Chassis Control
Window Lift
Sun Roof
Door Lock
Power Seat
HVAC
Dashboard
Navigation
In-Car Entertainment
Wire Harness
Generator
HID Headlight
Headlight Leveling
Directional Lighting
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement