Excell DIGITAL HIGH PRECISION WEIGHING SCALES Specifications

Excell DIGITAL HIGH PRECISION WEIGHING SCALES Specifications
ISO 9001:2000
Registered
W IRELESS W EIGHING T ECHNOLOGY
FOR THE
21 ST C ENTURY
Aircraft Platform Weighing System
®
AC30-60 Platform Scale
Intercomp’s AC30-60
Platform Scale is
the Industry’s Most
Technologically
Advanced Wireless
Weighing System.
Over twenty years
of experience is
engineered into every
high capacity/high
precision weighing
system produced.
With Spread Spectrum Telemetry
The sophisticated technology
will weigh virtually any
aircraft due to the full range
accuracy of ±0.1% of applied
load or better. Whether you
need to weigh the Space
Shuttle, a commercial airliner
or a military jet, the AC30-60
will provide the accuracy
necessary to obtain reliable
readings for all types of aircraft.
2
F
Fully Electronic and Federally Certified Weighing Technology
E A T U R E S
Intercomp’s sophisticated software
enables the AC30-60 to provide a wide
array of automatic corrections to improve
ease of use and accuracy.
¥
Temperature Compensation
eliminates the need for warm up time and
corrects readings in varying
temperatures/environments.
¥
Auto Leveling
digital inclinometer automatically levels the
platform scale to eliminate the need for proper positioning, shimming, etc.
¥
The key to the AC30-60’s performance is the fully electronic design.
Each AC30-60 utilizes four fully electronic shear beam load
cells. This represents cutting edge technology over older
hydraulically designed load cells (which often leak and are
subject to inaccuracies due to temperature shifts). More
importantly, Intercomp is the industry’s only manufacturer to
use load cells and indicators that are federally certified by the
U.S. National Institute of Standards and Technologies to
10,000 divisions (1 part in 10,000). It is also OIML Approved
as a Non-Automated Weighing Device by the European
Union*. Such approval certifies accuracy over a wide
temperature range, out of level condition, side load influence
and permanence, etc.
Latitude/Altitude Correction
corrects the readings for effects of gravity.
Enables the scale to be used anywhere in the
world without
recalibration or manual correction.
¥
Auto Calibration Correction
eliminates the need to cross reference calibration correction tables. Correction factors
built into software after
calibration cycle.
¥
Graduation Variance
graduation size can be changed throughout
the range to offer smaller increments at the
low end for finer readings when weighing light
aircraft.
¥
Display
one inch high self contained display with auto
back light automatically illuminates the display
in low light conditions. Lexan covering for ultimate protection.
¥
Keypad
stainless steel recessed buttons for extended
use and protection against damage.
AC30-60 Platform Scale Assembly
Pictured with Two Stage Ramp, Scale and Tire Stop
The AC30-60 features eliminate the need for manual
corrections thereby providing a more accurate and faster
weighing process. A B-747 can easily be weighed in under one
hour - including the set up and take down of the system! This all
translates into the ability to maximize payload and reduce man
hours - all critical savings.
The four corner load cell design eliminates the need to center
the aircraft’s tire. The scale is also designed to enable the
aircraft to approach from three directions - this enables the
user to utilize both dimensions of the active weighing surface
for weighing either single or dual tire configurations.
Power supplied from 12/120/220 VAC sources deliver enough
flexible options to never be without power. The DC power
source is derived from eight commercially available D size
batteries - alkaline or Nicad rechargeable - for easy access and
replacement - and supplies up to 50 full hours of continuous
operation. Adjustable auto battery shut off cuts power to save
battery life while a full charge on the Nicad batteries is
obtained after just ten hours.
3
All components and surfaces are skydrol resistant and water
tight. For applications in hazardous environments, users can be
assured that the AC30-60 is Factory Mutual Approved; for use
in explosive atmospheres (Class I, Div. 1, Groups A-D).
Each scale and component is constructed from high strength
aluminum to deliver a 150% safe overload protection, but
more importantly, keeps everything light weight and easy to
carry. The AC30-60 has a unit weight of only 140 lbs., and like
the accessories, has hand holds for easy lifting and positioning.
Another key to the AC30-60’s sophistication is its advanced
calibration function. All calibration is performed via the
keypad - no accessing of internal circuitry or use of any tuning
potentiometer is required. Furthermore, by using algorithms,
the AC30-60 requires only a three point span to lock in
calibration throughout the entire range. These features enable
each scale to be calibrated in less then half an hour each.
The weighing environment introduces an endless number
of factors that can reduce accuracy beyond what can be
detected and accounted for during calibration. After all, any
manufacturer should be able to achieve ±0.1% accuracy in the
calibration lab. But what happens when the environment
changes and you have to weigh on a sloped hangar floor or
the temperature changes drastically? Only the AC30-60 will
give you the assurance you need to know these factors are
accounted for - automatically. Simply set up the system, tow
on the aircraft and take the readings - no corrections, no
wasted time, no errors, no headaches.
Intercomp has accomplished
something very few can ever do combine precision and sophistication
with ease of use and portability in
one certified weighing system.
Our accomplishments enable you to maintain
a safe, reliable and cost effective weighing
program. The fully electronic design, certified
technology, automatic corrections and technical
characteristics will guarantee your satisfaction
and provide the justification you need to invest
in this state of the art technology.
Special Application Options
AC-HJS Hydraulic Jacking
For applications which prevent multiple weighings due to space restrictions
or lengthy leveling procedures, Intercomp offers the option of its hydraulic
jacking system within each AC30-60 Platform Scale. The AC-HJS lifts the
active weighing surface off the load cells for zeroing of the scale without
having to tow the aircraft off the entire platform.
A specially designed hydraulic system can be either connected to self
contained pumps or your central servo system. The aircraft is lifted only
slightly from the load cells in a matter of minutes. This provides significant
time savings and eliminates the difficulty of towing the aircraft on and off
the platforms. Such systems have been installed with some of the world’s
largest defense contractors, military branches and maintenance centers
and has undergone significant quality assurance testing to meet the most
rigorous standards.
Hydraulic Jacking and
High Capacity options used
for Boeing and USAF C-17
Globemaster weighings.
FLA High Capacity Scale
As airframe manufacturers continue to consider and deliver aircraft of increased weight,
Intercomp offers a system with increased capacity to meet the needs of future large aircraft.
Lightweight design easily enables two personnel to set
up the entire system.
The AC30-60 can be upgraded so that each platform has a capacity of 80,000 lbs/40,000 kgs. All
of the other features remain the same. Airlines and manufacturers considering larger aircraft can
be assured that the AC30-60 will meet their future needs. Such systems are already in place with
manufacturers and have thus met the stringent testing criteria by these customers.
Only Intercomp offers a field proven fully electronic weighing system
of this capacity to meet the future needs of the aviation industry.
AC30-60 Platform
Weighing System
is used by NASA
to weigh all Space
Shuttle Orbiters.
After set up, the aircraft is ready to be towed on to
the platform scales.
B-747 easily rolls across AC-AS Axle Spacer and AC3060 Platform Scales.
4
ACWeigh Wireless Technology
™
Aircraft comes to a stop.
AC2000-RF CPU
Wireless Technology with ACWeigh Software
The AC2000-RF CPU is a user friendly and high
performance method to centrally control and display all
scale information. It utilizes Intercomp’s renowned ACWeigh
Software to provide a complete weight and balance report and
serve as an inventory control manager of all weighing records.
The ACWeigh software uses step-by-step menus to weigh
aircraft quickly and accurately. The program is optionally
preprgrammed with the most common commercial configurations along with arm lengths and out of level correction tables.
All data is capable of being automatically transferred to an
MS Excel spreadsheet for use in any format.
Auto backlight illuminates large display.
AC30-60 Platform System is used by the USAF to weigh the
United States Executive fleet including Air Force One and Two.
AC30-60’s
are used by
military branches
as seen weighing
USAF F-15.
The use of advanced frequency hopping spread spectrum
(FHSS) telemetry eliminates the need for cables. No longer
do you need to read the display at each scale. Set up your
CPU at virtually any site within the hangar and you can
simultaneously control and display up to 32 scales.
FHSS technology was developed by the U.S. military to
prevent interference or interception of radio transmissions.
Standard IR, RF and Direct Sequence wireless communication
cannot match the distance, reliability and security of FHSS.
Most importantly, FHSS operates on a license free frequency band.
Wireless technology expands the horizon for computing and
transmitting data. Combined with the ACWeigh Software, this
complete package enables you to simultaneously capture the
results of a weighing, compute and verify required data and
then transmit a complete report.
For customers whose local regulations prevent the use of any
wireless radio communication, Intercomp offers infrared and
hard wire alternatives to communicate directly with the
ACWeigh software.
AC30-60 Systems Available Via National Stock
Numbers and GSA Contract.
Readings easily taken from a standing position.
5
Quality / Customer Support / Service
Accessories
All weighing systems are accompanied by the proper number of
ramps, axle spacers and tire stops to weigh the aircraft in your
inventory. The AC30-60 weighing system can be added to at any
time to increase the capacity and number of platforms to weigh
larger aircraft.
Any claims of offering the industry’s highest level of technology
and quality cannot be complete without the guarantee that you
are backed by unparalleled customer support.
The AC30-60 is designed with trouble free maintenance in mind.
It is basic by design and therefore easy to maintain. A weighing
system includes a basic spare parts kit, while advanced spare parts
kits are available so that all levels of service are performed with a
minimal amount of effort and expense.
All components, including the scales and AC-Weigh Notebook
are shipped complete within the specially designed AC-TC
Transport Cart. All carts have fitted compartments for each
individual scale and accessories. These compartments store the
items for easy access and guard against damage during transport.
Each AC30-60 scale shelf is hard wired with a charging port so
that by simply plugging one 120/220 VAC line into the cart, all
the scales can be charged simultaneously while in storage. The
cart is framed for durability and covered by a tarp for weatherproof protection. Front swivel pneumatic wheels, brake, swivel
tow bar and fork tubes ensure easy transportation and handling.
The cart has been tested by the USAF to protect all items when
towed repeatedly over one inch bumps at ten miles per hour.
AC-TC Transport Cart
Individual shelves and compartments for protection
during stowage and transportation. Side panel opens to
connect internal charger to scales.
Aside from our twenty plus years of experience,
Intercomp maintains varying degrees of certification
for quality and inspection as well as complying with
regulations set forth in ANSI standards. Furthermore,
we supply systems to the USAF, US Army, US Navy, NASA
and airframe manufacturers and have therefore gone
through extensive inspections by their QA departments.
The AC30-60 has also undergone substantial testing for accuracy,
repeatability, drift and overload protection under hydraulic force
calibration and dead loads - across the entire range - by the State
of Minnesota Weights and Measurements Division and under the
scrutiny of U.S. Government Inspectors. This, combined with our
NIST certification, demonstrates the AC30-60 Platform Weighing
System is unparalleled within our industry in terms of testing and
certification. This is the final assurance you need to guarantee you
are purchasing the most reliable and highest quality technology.
This transportation cart is built from years worth of testing and
customer input to enable you to store,transport, protect, set up
and take down the weighing system in the most efficient manner.
Intercomp also offers the AC-CSA Automatic Calibration
System to enable the customer to calibrate and service the entire
weighing system, as well as other scale systems. Constructed from
steel, the surface area is large enough to calibrate the entire scale
and each corner. The load cell and indicator are certified directly
by the U.S. National Institute of Standards and Technologies to
provide the required 4:1 accuracy standard of ±0.025% (as per
internationally recognized ASTM standards).
But what would all of this technology mean without customer
support? At Intercomp we realize the pressure and financial
burdens a weighing can place on either preliminary design,
production phases or maintenance/airline weighing. We therefore
offer service and spare parts in both the UK and Singapore as well
as our factory in Minneapolis, MN so that our customers are
always within a moments reach of technical assistance.
To guarantee you are satisfied with your purchase
and
capable of operating and maintaining the entire weighing system without support from the factory, Intercomp provides
System Commissioning.
Additionally, Intercomp’s Contract Weighing Service can dispatch
equipment and trained personnel to complete a weighing should
your equipment be damaged, limited by capacity or configured for
a certain type of aircraft.
A factory trained engineer inspects the system upon delivery
to ensure no damage has occurred during shipment and then
administers a complete training program covering all aspects
of operation, service and calibration. Upon completion, the
customer will be able to support themselves in house as opposed
to relying on the factory or outside sources for assistance.
Intercomp then issues certificates of training indicating compliance with operational, maintenance and calibration guidelines.
The entire weighing system is backed by a full one year parts and
labor warranty. Extended warranty and service contracts are also
available upon request.
6
AC30-60 PLATFORM SCALE SPECIFICATIONS
PLATFORM
Capacity: 10,000, 30,000, 60,000 (standard),80,000 Ibs/
5,000, 15,000, 30,000 (standard), 40,000 kg
Overall Dimensions:
• With Readout Assembly: (standard)
34 L x 33.5 W x 4 H in/864 L x 851 W x 102 H mm
• Without Readout Assembly:
34L x 28W x 4H in/864L x 711W x 102 H mm
Active Weighing Surface: 30 L x 24 W in/762 L x 610 W mm
Weight: 140 Ibs/64 kg
Construction: Aluminum
Overload: 150%
Basic internal design enhances ease of support and maintenance.
Fully electronic, Federally certified load cells maximize accuracy
and performance.
Any manufacturer can make claims of quality, service or
technical superiority, but only Intercomp can back such
statements by our experience in providing the industry with
these attributes.
No other manufacturer supplies this fully electronic technology
to more airlines, airframe manufacturers, maintenance centers
or military branches than Intercomp.
We invite you to review our broad customer list which will give
you the comfort and reassurance that you are following the
well scrutinized decisions of the industry’s most experienced,
prestigious and satisfied users.
Our customer base indicates that when the world looks for a
weighing system, one that is built with quality, reliability and
performance - they look to Intercomp.
OPTIONS:
• Transport Cart
• Transport Case
• AC2000-RF CPU Computer
• ACWeigh Software
• Telemetry
• Infrared
• Remote Battery Charger
• Factory Mutual - Intrinsically Safe
• Hydraulic Jacking System
• Super High Capacity Scale
TWO STAGE RAMPS
Assembled: 78 L x 24 W in/1,981 L x 610 W mm
Weight: 70 Ibs/32 kg
Entry Ramp: 46 L x 24 W in/1,168 L x 610 W mm
Weight: 32 Ibs/14.5 kg
Secondary Ramp: 32 L x 24 W in/813 L x 610 W mm
Weight: 38 Ibs/17 kg
Slope: 3°
ELECTRONICS
Accuracy: ±O.1% of applied load or ± 1 graduation;
whichever is greater
Circuit Board: CMOS 20 bit ultra high precision A/D converter
with high efficiency microcontroller
NTEP approved 10,000 Division
Transducer Type: NTEP/OIML approved 10,000 Division Shear
Beam Load Cell
Input/Output: RS232 or RS485
Display: 1" in/25 mm L.C.D.
Graduations: 1, 2, 5 and 10 Ib/0.5, 1, 2 and 5 kg
(10 lb/5 kg standard)
Power Source Required: 12 VDC, 120/220 VAC
Batteries: 6 “D” size NiCads (standard) or Alkaline
EMI/RFI: Meets Mil-Spec 461 and Euro EMC Directives
ENVIRONMENTAL
Humidity: 5 to 99% Non-condensing
Temperature: Operating: -10° C to 50° C (14° F to 122° F)
Storage: -40° C to 75° C (-40° F to 170° F)
AXLE SPACER
Dimensions: 25.5 L x 24 W x 4 H in/648 L x 610 W x 102 H mm
(length may vary due to different landing gear dimensions)
Weight: 40 Ibs/18 kg
TIRE STOP
Dimensions: 8 L x 24 W x 1O H in/203 L x 610 W x 254 H mm
Weight: 20 Ibs/9 kg
TRANSPORT CART
Dimensions: 121 L x 40 W in/307 L x 101 W cm surface area
Construction: Mild Steel
Wheels: Urethane or Pneumatic (standard) with front swivels
Features: Tow bar with eyelet, forklift tubes, brake and canopy cover
Power: 12 VDC, 120/220 VAC
CONTROLS (Available with self-contained readout assembly)
General: All controls stainless steel, located on waterproof and oil
tight keypad with large contact surfaces for protection
On/Off: Two separate switches for unambiguous operation
Zero: Push button zero checks for motion as per
NIST/OIML requirements
Ib/kg: Sets units of measure
Indicators: Low battery, Ib/kg and error messages
FEATURES
Latitude/Altitude Correction: To correct values (Default 45°)
Calibration: Keypad calibration corrects any out of tolerance condition
Motion Detection: Adjusts for motion or movement on scale to prevent
error in weight reading
Auto Shut Off: Shuts off automatically when not in use to conserve
battery life (variable)
Memory Backup: Retains displayed weight if there is a power loss
Backlight: Automatic sensor illuminates display in low light conditions
7
Platform Side View - beveled edge
for oversized or dual tires
4.00 IN
102 MM
3.50 IN
89 MM
Frame
Active Weighing Surface
Display
lb/kg
Zero
Battery Cover
Hand
Hold
On
Off
I/O connector Charge Lamp
Charge
Note: Platform, ramp and spacer can
be sized to your specifications.
*Pending
AC30-60™ and AC-Weigh™ are registered trademarks of Intercomp®
Specifications subject to change without notice.
®
3839 County Road 116
Medina, Minnesota 55340-9342 U.S.A
Toll Free 800-328-3336 Worldwide 763-476-2531
Fax: 763-476-2613
email: [email protected]
intercompco.com
©2006 Intercomp Company
Printed in the U.S.A.
Made In U.S.A.
ISO 9001:2000
Registered
700641
AC5-45 LP Series
™
LOW PROFILE PLATFORM SCALES
ISO 9001:2000
Registered
The Next Generation
in Aircraft Weighing
Maximizing accuracy, ease of use and portability
has been long sought in aircraft weighing systems.
Intercomp once again answers the call of the
industry by providing the AC5-45LP Series
Low Profile Platform Weighing System –
the next generation in aircraft weighing.
The AC5-45LP series offers a range of
models designed to meet your specific weighing
requirements. Combines high precision accuracy
with a lightweight low profile platform design
to provide the easiest to use weighing system.
Wireless communication enables the data to
be transmitted to a central processing unit
without the use of any cabling.
Whether you need to weigh a non fixed wing
or a wide body aircraft, the AC5-45LP series of
scales will enable you to complete the job quickly
and accurately. The system can almost effortlessly
be brought to the aircraft so weighing can be
completed in the easiest and most cost effective
manner. Most importantly, this family of scales
combines affordability with advanced technology.
®
Platform Design
The Intercomp platform system is fully electronic - no outdated
hydraulics or moving parts. All load cells are certified for
repeatability and performance to provide a full range
accuracy of +/-0.1% of applied load (accuracy traceable
to U.S. National Institute of Standards and Technologies).
The AC5-45LP Series is designed with portability and ease of
use in mind. Because the height is less than half that of traditional
platform scales, long and heavy ramps and accessories are not
required. The lightweight compact construction enables one person
to carry two scales.
Ease of Operation
Simply place the scales in front of the tires and tow the aircraft
onto the platform. No adjustments or manual corrections are
required - the scale does all the work for you. Simply take the
readings and back the aircraft off.
AC5-45 LP Series
The Only Fully Electronic
Low Profile Scales
with Wireless Technology.
Jumbo-sized Display
Measurements are easy to view from a standing position due to
the 1 inch / 25 mm high LCD screen. An automatic back light
illuminates the display to improve readings in low light conditions.
No more getting on your hands and knees with a flashlight to read a
small display. Indications include lb/kg mode, low battery, calibration
lock, and auto zero. Additionally, error messages reduce troubleshooting during service incidence. All push buttons are stainless steel and
recessed while the entire panel is protected by a lexan shield to
prevent damage even if an aircraft tire rolls over the indicator.
Automatic Weight Corrections
A variety of corrections ensure the weight displayed is the weight
applied - no need for manual adjustments. Because the effects of
gravity can alter weights at different locations, the AC5-45LP Series
includes automatic altitude and latitude correction. Unlike
hydraulic scales, the AC5-45LP doesn’t require lengthy warm up
time or multiple pre-loading to prepare the scale for use in various
environments. The readings are automatically corrected for changes
in temperature due to internal compensation and the fully electronic
design. Most importantly, multi span calibration improves linearity
and eliminates the use of manual correction tables.
Battery or AC Power
Rest assured you will never be without power. The scale is AC/DC
powered by commercially available alkaline or rechargeable batteries
and 120/220 VAC sources. The scale requires no special 12 volt
batteries or gel cells which are costly and difficult to replace.
If you lose power while the aircraft is loaded on the scale? - no problem.
Just restore power without off loading the aircraft and the weight
automatically reappears due to internal memory back up. Intrinsically
safe, Factory Mutual Approved models are available.
Customer Satisfaction
Intercomp has supplied this system to the world’s leading airlines, airframe manufacturers, defense contractors, maintenance
centers and military branches. Our twenty plus years of experience in manufacturing scales has enabled us to provide the most
sought after features and functions. Furthermore, our commitment to customer service and support has enabled us to keep our
customers satisfied years after their purchase. Up to the minute service and support is provided by our factory in Minneapolis, MN,
U.S.A. and service center located near Heathrow Airport, UK.
WE INVITE YOU TO LEARN MORE ABOUT THIS INNOVATIVE TECHNOLOGY BY
CONTACTING INTERCOMP - THE WORLD LEADER IN AIRCRAFT WEIGHING SYSTEMS.
Web Site: www.intercompco.com
E-mail: [email protected]
THE AC5-45LP IS AVAILABLE IN THREE PLATFORM CONFIGURATIONS.
Select the model that is best for you depending on your weighing requirements and fleet configuration.
With Spread Spectrum Telemetry
AC5-15LP
™
AC20-30LP
™
Designed for non-fixed wing,
single engine, light regional and
various military aircraft. The unit
of choice for f.b.o.’s, light aircraft
manufacturers, and military units.
Weighs almost anything from
twin engine to narrow body
commercial aircraft. Ideal for
maintenance centers and
regional airlines.
Capacities:
to 15,000 lbs/ 7,500 kg
Capacities:
to 30,000 lbs/ 15,000 kg
Platform Size:
15 L x 15 W x 1.6 H inches
381 L x 381 W x 40 H mm
Platform Size:
22 L x 15 W x 1.6 H inches
558 L x 381 W x 40 H mm
AC45-60LP ™
Lightweight and low profile solution
for virtually all types of military and
commercial aircraft. Designed to
maximize full range accuracy to weigh
anything from a F-16 to a B747. The
most applicable model for maintenance
centers and major airlines.
Capacities:
to 45,000 lbs/ 22,000 kg
60,000 lbs/ 27,000 kg
Platform Size:
24 L x 30 W x 2.9/4 H inches
610 L x 762 W x 73/100 H mm
* Other sizes & capacities available
Web Site: www.intercompco.com
Accessories
E-mail: [email protected]
Standard accessories include ramps and axle spacers (applicable by model). They are compact, lightweight and durable. All together, any
configuration can be easily transported in the cargo bay of an aircraft. The system is packed in either a MIL SPEC transport case or specially
designed transport cart with tow bar. Both have internal charging systems so all scales can be charged while in storage.
AC2000-RF CPU – Wireless Technology with ACWeigh Software
The AC2000-RF CPU is a user friendly and high performance method to centrally control
and display all scale information. It utilizes Intercomp’s renowned ACWeigh Software to
provide a complete weight and balance report and serve as an inventory control manager of
all weighing records.
The ACWeigh software uses step-by-step menus to weigh aircraft quickly and accurately. The
program is optionally preprogrammed with the most common commercial configurations along
with arm lengths and out of level correction tables. All data is capable of being automatically
transferred to an MS Excel spreadsheet for use in any format.
The use of advanced frequency hopping spread spectrum (FHSS) telemetry eliminates the need
for cables. No longer do you need to read the display at each scale. Set up your CPU at virtually
any site within the hangar and you can simultaneously control and display up to 32 scales.
FHSS technology was developed by the U.S. military to prevent interference or interception
of radio transmissions. Standard IR, RF and Direct Sequence wireless communication cannot
match the distance, reliability and security of FHSS. Most importantly, FHSS operates on a
license free frequency band.
Wireless technology expands the horizon for computing and transmitting data. Combined
with the ACWeigh Software, this complete package enables you to simultaneously capture the
results of a weighing, compute and verify required data and then transmit a complete report.
For customers whose local regulations prevent the use of any wireless radio communication,
Intercomp offers infrared and hard wire alternatives to communicate directly with the
ACWeigh software.
AC2000-RF CPU,
Interconnect cables,
AC Series
Platform Scales
and Intercomp
Jack Weigh Kit
digital output load
cells are 100%
interchangeable to
give the customer
total flexibility.
OPTIONS:
• Transport Cart
• Transport Case
• AC2000-RF CPU Computer
• ACWeigh Software
• Telemetry
• Infrared
• Remote Battery Charger
• Factory Mutual
- Intrinsically Safe
Specifications
Model
Category
AC5-15LP
Performance
Capacities
5,000, 10,000, 15,000 lbs /
20,000, 30,000 lbs /
45,000, 60,000 lbs/
2,500, 5,000, 7,500 kg
10,000, 15,000 kg
22,000, 27,000 kg
1, 2, 5 lbs/ 0.5, 1, 2 kg
5 lbs/ 2 kg
10 lbs/ 5 kg
±0.1% of applied load or ±1 graduation; whichever is greater
Graduation
Accuracy
Physical
Controls
AC20-30LP
Platform Size
15 L x 15 W x 1.6 H inches
381 L x 381 W x 40 H mm
Weight
Construction
30 lbs/ 13.6 kg
48.5 lbs/ 22 kg
High Strength Aluminum Alloys
General:
All controls housed within water tight keypad
Stainless steel recessed switches
Keypad & Display protected by lexan shield
Two separate switches for unambiguous operation
Automatically zeros reading
Sets unit of measure
Low Battery, lb/kg, latitude/altitude, error messages
On/Off:
Zero:
lb/kg:
Indications:
AC45-60LP
22 L x 15 W x 1.6 H inches 24 L x 30 W x 2.9/4 H inches
558 L x 381 W x 40 H mm 610 L x 762 W x 73/100 H mm
94 lbs/ 42.7 kg
Features
Latitude/Altitude
Correction:
Facility to enter values for correction of gravitational effects on mass (default 45˚)
Calibration:
Multi-span keypad entry (required annually)
Motion Detection:Adjustable sampling of readings to minimize effects of artificial readings
Auto Shut-Off: Turns scale off when not in use to conserve battery life (variable)
Backlight:
Automatic sensor illuminates display in low light conditions for improved visibility
Battery Backup: Retains weight values due to loss of power
Error Messages: Advises of errors in electronics to prevent erroneous readings
Low Battery
Indication:
Advises of low battery status
Electronics
Circuit Board:
Transducer Type:
Input/Output:
Display:
Power Source:
Batteries:
Temperature
EMI/RFI:
Humidity:
CMOS 20 bit ultra high precision A/D converter with high efficiency micro-controller
Fully Electronic Shear Beam Load Cell
RS232 or RS485
1˝/ 25 mm high LCD
12 VDC, 120/220 VAC
Shipped with applicable commercially available AA or D size rechargeable batteries
Will also accept commercially available AA or D size alkaline batteries
Meets Mil-Spec 461 and Euro EMC directives
5-99% Non-condensing
Operating:
Storage:
14˚F to 122˚F (-10˚C to 50˚C)
-40˚F to 170˚F (-40˚C to 75˚C)
Contact Intercomp for higher capacity AC30-60 platform scales or JW load cell kits for other aircraft weighing applications.
Specifications Subject To Change Without Notice.
AC5-15LP, AC20-30LP, AC45LP, AC5-45LP and AC45-60LP are registered trademarks of Intercomp Company.
®
Made In U.S.A.
ISO 9001:2000
Registered
©2006 Intercomp Company
3839 County Road 116
Medina, Minnesota 55340-9342
Printed in the U.S.A.
Toll Free: 800-328-3336
Worldwide: 763/476-2531
Fax: 763/476-2613
intercompco.com
E-mail: [email protected]
700640
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement