Conveying Accessories

Conveying Accessories
Conveying Accessories
Station T Valves: 1.5­-4” (40-100 mm)
Lances: 1.5-4” (40-100mm)
External Line Valves: 1.5­-4” (40-100 mm)
External Proportioning Valves: 1.5­-4” (40-100 mm)
Station T Valves
Heavy duty aluminum construction with air-actuated positive-sealing disc.
Indicator cap on shaft helps identify mal-functioning station 24.
VDC or 115 VAC Models.
Inlet/Outlet Diameter
in./mm
1.5/40
2.0/50
2.5/65
3.0/75 4.0/100
NOTE: One Station T is required for each VR Series receiver in a vacuum conveying system.
Station T Valves 1.5” to 4” O.D.
Lances
Used to remove material from bulk containers. Available in aluminum or stainless steel.
Lance O.D.
in./mm
1.5/40
2.0/50
2.5/65
3.0/75
4.0/100
Pick-up lance with adjustable air-flow,
1.5” to 4” O.D.
ELV- External Line Valve (Includes coupler)
Provides in-line control of vacuum material flow. ELV is used as a positive vacuum seal at the receiver inlet when not
moving material, typically in common material line conveying systems. Available in 24 VDC or 115 VAC models.
MATERIAL
ELV-20-24
EPV- External Proportioning Valve (Includes coupler)
External proportioning valves are used as a material line
selector at the receiver inlet, typically in regrind proportioning applications. The EPV can also be used for purging
material lines to prevent build-up and plugging of the
material lines. Heavy duty Stainless Steel construction
with air-actuated positive sealing disc(s) is suitable for
applications up to 350º F (170º C). Easily view the
interior through a thick polycarbonate window.
Quick release latches allow easy, no-tools clean out.
Separate, mini-PLC controls are also available to add
proportioning or purge to existing control systems.
Available in 24 VDC or 115 VAC models.
EPV-25
Proportioning Loading
Control with Blowback
Specifications:
24 VDC Models
EPV-15-24
EPV-20-24
EPV-25-24
EPV-30-24
EPV-40-24
115/1/60 Models
EPV-15-11
EPV-20-11
EPV-25-11
EPV-30-11
EPV-40-11
Dimensions
in
cm
in
cm
in
cm
in
cm
in
cm
Inlet/Outlet O.D.
1.5
3.85
2
5.1
2.5
6.35
3
7.6
4
10.16
A - Height
7
17.8
8.5
21.6
11.38
28.9
11.38
28.9
14.75
37.5
B - Width
3.25
8.26
3.75
9.53
4.75
12.07
4.75
12.07
5.75
14.61
C - Length
9.94
25.25
9.94
25.25 10.69 27.15 12.25
31.1
13.19
33.5
D - Inlets C-C
2.75
7
3.25
8.26
4.19
10.64
4.19
10.64
5.25
13.34
E - Inlet Length
3.69
9.37
3.69
9.37
4.44
11.28
4.5
11.43
4.44
11.28
3
7.62
3
7.62
3
7.62
3.5
8.89
4.5
11.4
F - Outlet Length
Filter Purge Screens
Available for all
Sizes of EPV
Note: Compressed air consumption: 0.2 ft /min. at 80 psi ­(0.3 m /hr at 5.5 bars
3
3
Accessories: (Shipped separately. Show as separate line item on order.)
Filter Purge Screen: Enables EPV to function as an external purge
valve.1.5”, 2.0”, 2.5”, 3.0”, 4.0”
Proportioning Valve Control: 24VDC, 115/1/60
Note: Requires connection to 24VDC (or 115 if using 115V) power at
the receiver or loader, plus load signal.
DeviceNet Cable(s): In lieu of standard cable(s) 24VDC
Pneumatics Solenoid Assembly Kit:
In lieu of Standard SMC, 24 VDC Valve
E
REF
A
D
B
C
F
REF
EPV Drawing
External Proportioning Valve Application:
Remote Installation of
Proportioning Valve
Direct Attachment of
Proportioning Valve
Material A
Proportioning
Valve
Material B
Standard
Coupler
Material B
External
Proportioning
Valve
VL-12-MM
with Flapper
Mini PLC
Non-proportioning
Loader or Receiver
Material A
or Optional
Purge
Sequence
Convey/Purge Valve Application:
Dry air
manifold
Intake dry air
purge
Intake ambient
air purge
Optional
quick change
manifold
Intake filter
- ambient air
convey
Convey/Purge
valve
Convey/Purge
valve
Configured to convey resin and purge
material lines with ambient air.
© 2014 NOVATEC, Inc.
All rights reserved All information in this
bulletin is subject to change without notice.
Optional
quick change
manifold
Intake dry air
convey
Configured to convey resin and purge material
lines with dry air taken from dry air manifold.
222 East Thomas Avenue Baltimore, MD 21225 USA 410-789-4811 | Fax: 410-789-4638
1-800-BESTDRY (800-237-8379) | sales@novatec.com | www.novatec.com
Form #VPDB 19 FEB 2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising