RePoRt CaRD (For fixtures using the Lutron Hi-lume A-Series LED Driver)

RePoRt CaRD (For fixtures using the Lutron Hi-lume A-Series LED Driver)
Report Card
(For fixtures using the Lutron
Hi-lume® A-Series LED Driver)
*required fields
Manufacturer:*
Website:*
Applicable
model numbers:*
Date:*
Fixture manufacturer’s description
Type of fixture:*
Choose from list at right Operating voltage:
120 V
Control type:
2-wire forward phase (with neutral)
Dimming range:
100% – 1%
Input power (max.):*
Cove/Strip light
Downlight
Linear LEDs
Light engine
Pendant
Pucklight
Sconce
Troffer fixture
Wallwash
Driver manufacturer: Lutron Electronics
Product: Hi-lume A-Series LED driver
Compatible Lutron products
Product family
NovaTa®
Maestro Wireless®
RadioRA® 2 1000W
RadioRA 2 adaptive dimmer
RadioRA 600 W
RadioRA 1000 W
HomeWorks® QS 600 W (LED*)
Fixtures per dimmer
(120 V only)*
Measured light
output range
NTLV-600-CPN0199
1–8
100% – 1%
MRF2-6ND-120
RRD-10ND
RRD-6NA
RA-6ND
RA-10ND
1–8
1 – 13
1–8
1–8
1 – 13
100% – 1%
100% – 1%
100% – 1%
100% – 1%
100% – 1%
1–8
1 – 13
1–8
1 – 10
(per output)
1–8
100% – 1%
100% – 1%
100% – 1%
1 – 13
100% – 1%
HWI-WPM-6D-120
1 – 10
(per output)
100% – 1%
QSGR-,
QSGRJGRX-3100,
GRX-3500
1 – 10
(per output)
1 – 10
(per output)
HW-RPM-4U-120,
LP-RPM-4U-120
1 – 26
(per output)
100% – 1%
HW-RPM-4A-120,
LP-RPM-4A-120
1 – 13
(per output)
100% – 1%
Various
1 – 26
100% – 1%
SZ-6ND
1–8
100% – 1%
Part number
HomeWorks QS 1000 W (LED*)
HomeWorks QS adaptive dimmer
HQRD-6ND
HQRD-10ND
HQRD-6NA
HomeWorks QS WPM (LED*)
HQRJ-WPM-6D-120
HomeWorks 600 W dimmer
HRD-6ND
HWD-10ND,
HRD-10ND
HomeWorks 1000 W dimmer
HomeWorks WPM
GRAFIK Eye® QS (fluorescent*)
GRAFIK Eye 3000(fluorescent*)
RPM-4U module,
(LCP, HomeWorks,
GRAFIK Systems, Quantum®)
RPM-4A module
(LCP, HomeWorks,
GRAFIK Systems, Quantum) (LED*)
GP panels
(LCP, HomeWorks,
GRAFIK Systems, Quantum)
Stanza®
100% – 1%
100% – 1%
100% – 1%
100% – 1%
* Set load type before adjusting low-end trim.
NOTE: Contact Lutron tech support for deganging rules when using wallbox controls on the Hi-lume A-Series LED Driver.
NOTE: Low-end trim may need to be adjusted to achieve 1% dimming.
For information on low-end trim adjustment, consult installation instructions.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement