pcie-9842 datasheet
200 MS/s 14-Bit 1-CH High-Speed PCI Express Digitizer
The ADLINK PCIe-9842 is a 200 MS/s 14-bit 1-CH digitizer designed for applications such as LIDAR testing,
optical fiber testing, and radar signal acquisition. The 100 MHz bandwidth analog input with 50 ohm impedance is
designed to receive ±1 V high speed signal. With this simplified front-end design and high stable onboard reference,
the PCIe-9842 provides not only high accuracy measurement results but also delivers high dynamic performance.
For applications that require data to be acquired and transferred in real-time, the PCIe-9842 utilizes the PCI
Express x4 bus as its interface. When signals are converted from analog to digital data, the data will be transferred
to host system memory continuously because of the high bandwidth of the PCI Express.
Up to 200 MS/s sampling rate
High resolution 14-bit ADC
±1 V Input range with 50 Ω input impedance and DC couple
Up to 100 MHz bandwidth for analog input
High speed PCI Express x4 bus interface
Scatter-Gather DMA data transfer for high speed
data streaming
One external digital trigger input
Digital trigger output to stimulate external instruments
Support Auto-calibration
■Operating Systems
• Windows 7/Vista/XP
• Linux
■Driver Support
• WD-DASK for Windows
• WD-DASK/X for Linux
• DAQPilot for LabVIEW
• DAQPilot for Windows
Ordering Information
200 MS/s 14-Bit 1-CH High-Speed PCI Express Digitizer
Terminal Boards
Terminal Board with One 20-pin Ribbon Connector and
DIN-Rail Mounting
* Cables are not included.
CH 0
Number of Channels: 1 single-ended channel
Input Impedance: 50 Ω ± 2%
■ Input Coupling: DC
■ Input Signal Range: ±1.0 V
■ Overvoltage Protection: ±5 V
■ ADC Resolution: 14-bit, 1 in 16384
■ Offset Error: ±1 mV
■ Gain Error: ±0.5% of input
■ -3dB Bandwidth: 100 MHz
■ Sample Clock Source: Internal: onboard clock (oscillator)
■ Timebase Frequency: 200 MHz
■ Trigger Source: Software, external digital
■ Trigger Mode: Post-trigger, delay-trigger
■ External Digital Trigger Input
• Compatibility: 3.3 V TTL, 5V input tolerant
■ Digital Trigger Output (Software Selectable)
• Compatibility: 5 V TTL
■Recommended Software
Analog Input
On-board Reference / Data Memory
■ Reference Voltage: +5.000 V
■ Reference Temperature Drift: < ±5.0 ppm/°C
■ Onboard Memory: 16 K samples
■ Data Transfer Type: Scatter-Gather DMA transfer
General Specifications
■ Environment
• Operating Environment
- Ambient temperature: 0°C to +50°C
- Relative humidity: 5% to 95% non-condensing
• Storage Temperature
- Ambient temperature: -20°C to +80°C
- Relative humidity: 5% to 95% non-condensing
■ Physical
• PCB Dimensions - 106.7 mm (H) X 174.6 mm (W)
■ IO Connector
• SMA X 3 for analog input & external trigger input and trigger output
■ Bus Interface
• PCI Express x 4
■ Power Requirement
Power Rails
Full Load Current
+12 V
222 mA
+3.3 V
1.21 A
■ EMC/EMI: CE, FCC Class A
IT and Instrumentation for industry
Sales: +44 (0) 1273 570 220 Website: www.amplicon.com Email: sales@amplicon.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF