HS9385SS Sunshield Installation

HS9385SS Sunshield Installation
S UNSHIELDS
HS9385SS
I N S TA L L AT I O N
AND
O P E R AT I N G I N S T R U C T I O N S
1
DESCRIPTION
2
Item
Quantity
Sunshield
1
Straps
2
Tools: Straight blade Screwdriver
The HS9385SS sunshield provides protection from the
direct rays of the sun and promotes cooling to reduce
internal housing temperatures.
Item number HS9385SS:
For use with HS9385 Series Housings.
1.
2.
Sunshield
Bottom View
INSTALLATION
3.
4.
5.
6.
7.
Insert both straps through the holes in the sunshield. See
Figure 1.
Position the sunshield on the housing. Nominal overhang
is 25mm (1 in.) but the sunshield can be positioned as
needed.
Wrap the straps around the housing. Both straps must be
used.
Thread the strap ends into the backside of the screw
mechanism on the other side of the strap. Turn the
mechanism on the screw clockwise several turns to get
the strap started.
Rotate the straps through the holes in the sunshield.
Rotate until the screw head is accessible from the
opposite side holes. This will hide the screw mechanism
from plain view. See Figure 2.
Make final adjustments to the position of the sunshiled.
Turn the screw mechanism clockwise to tighten the
straps. Be sure straps are securely tightened.
Straps
Sunshield
Figure 1 Assembling the Sunshield
Screw Mechanisms
Cover
Straps
Figure 2 Securing the Sunshield
©2002 Aigis Mechtronics
1124 Louise Road, Winston-Salem, NC 27107-5450
Tel: 336.785.7740 Fax: 336.785.7744
100 0101 001 AIG 05/04
Printed in U.S.A.
Data subject to change without notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising