Eton | CLASS D AMPLIFIER | Specifications | Eton CLASS D AMPLIFIER Specifications

Eton CLASS D AMPLIFIER Specifications
C
Coils and Electronic Controls
Solenoid valve and Proportional valve coils and
electronic controls for proportional valves
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-1.A
Coils and Electronic Controls
Section Contents
Model
Typical Application
Pressure bar (psi)
Page
Coils
C
ToughCoils™ Information.................................................................................................................................................. C-3
ToughCoils™ Model Code and Specifications.................................................................................................................. C-4
S Series .............................................................................for 8 size solenoid valves ........................................... C-5
P Series .............................................................................for 8 size solenoid valves ........................................... C-5
J Series ..............................................................................for 10,12,16, 20 size solenoid valves........................... C-6
H Series .............................................................................for 10,12,16, 20 size solenoid valves.......................... C-6
Coil Dimensions..................................................................S & P Series Coils......................................................... C-7
Coil Dimensions..................................................................J Series Coils................................................................ C-8
Coil Dimensions..................................................................H Series Coils................................................................ C-9
R & L Series coils......................................................................for 12 size 3 & 4 way solenoid valves........................ C-10
C13*C16 Information.................................................................................................................................................... C-11
C13*C16 Model Code................................................................................................................................................... C-12
Explosion proof valve coils........................................................for SV*E series valves ............................................... C-13
EPV proportional valve coils ......................................................................................................................................... C-15
EFV proportional valve coils.......................................................................................................................................... C-16
Proportional Valve Drivers
Power Plugs for Proportional valves ........................................EHH-AMP-702-D/K-* Series........................................ C-17
“Soft Switch” Power Plugs .....................................................EHH-AMP-702-C-* 10 Series...................................... C-23
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-2.A
.B
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
ToughCoils™
Information
ToughCoils™
ToughCoils™ Features
Eaton/IH ToughCoils™ have
been designed to provide
industry leading environmental
protection and solenoid
performance in a compact and
rugged package. ToughCoils™
with integrated connectors
are rated up to IP69K
environmental protection.
ToughCoils™ are available
with a variety of popular
integrated connection options
and with wire leads.
IP69K Environmental
Protection - This rating
provides protection against
the ingress of dust and high
pressure jet stream. The IP69K
test was designed specifically
for rating protection against
a high-pressure jet stream,
high liquid temperature and
close nozzle distance from
the enclosure surface. IP69K
protection is standard on coils
with MetriPac or Deutsch,
integrated connectors.
The best in class, one-piece,
shell encapsulated, design
meets the most stringent
environmental requirements
for mobile and industrial
applications.
The exclusive compact
coil design from Eaton/IH,
offers the advantage of field
retrofitability on all existing,
and new, applications.
"Thermal Shock Dunk”
Test - Eaton/IH ToughCoils
have been qualified to withstand the toughest Mobile
Equipment “Thermal Shock
Dunk” tests. Integrated
Deutsch, MetriPack1 and
Leadwire2 connectors exceed
“Thermal Shock Dunk” test
qualifications at 140°C. The
“Thermal Shock Dunk” test
requires coils to be heated,
reaching a stabilized
temperature of 100°C, then
immediately immersed in a
solution at 0°C. The thermal
shock is repeated five times
with the coil monitored for
dielectric strength in the
solution and functional
performance is verified.
Field Retrofitable ToughCoils™ replace all
current Eaton coils used on
D Frame and Shell type coils.
Compact coil dimensions allow
substitution in all existing
applications. ToughCoils are
available for most 8, 10, 12,
16 and 20 series valves. No
additional water/weather
proofing is required.
Steel Shell Encapsulated
Design - ToughCoils™ provide
protection against physical and
environmental damage.
In addition, ToughCoils™
passed a more severe powered dunk test conducted
from 100° C to 0° C with
115% rated voltage applied.
1
MetriPack® 150 and MetriPack®
280 are registered trade marks of
Delphi Packard Electric Systems
2
Coils with integrated connectors
are recommended for applications
in harsh environments.
Eaton/IH ToughCoils™,
with rated connector,
meet or exceed
all major OEM
environmental
protection requirements
Shown with deutsch connection options
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-3.A
.B
C
ToughCoils
Model Code S,P,J and H Series Coils
MCSC – * – *** – * – ** – * – ** – 10
Model Code
1
1 Function
C
2
3
4
5 Connector
MCSC - Solenoid coil
2 Series
S - Size 8 (210 Bar)
P - Size 8 (350 Bar)
J - Size 10, 12, 16, 20 (210 Bar)
H - Size 10, 12, 16, 20 (350 Bar)
3 Voltage Rating
012 -12 volt
024 -24 volt
036 -36 volt
048 -48 volt
115 -115 volt
230 -230 volt
G0 - ISO 4400 DIN 43650
Q0 - Spade Terminals
W0 -Flying lead
N0 -Deutsch Male, DT04-2P,
Integrated (DC Only)
Mating Connector:
Deutsch DT06-2S
Y0 -Amp Jr (DC Only)
Mating Connector:
AMP 963040-3 or
equivalent
D0 - MetriPack® 150 Male,
Integrated (DC Only)
Mating Connector:
Delphi 12052641
5
6
7
8
J0 -MetriPack® 280 Male,
Integrated (DC Only)
Mating Connector:
Delphi 15300027
E0 -Weather–Pack (Packard)
female on wire leads
Mating Connector:
Delphi 12010973
F0 - Weather–Pack (Packard) male on wire leads
Mating Connector:
Delphi 12015792
Note: Auxillary parts for
mating connectors may be required.
6 Lead Length
0 - None
A -152mm [6.0 in]
(Standard length
with connector)
B -610mm [24.0 in]
(Standard length
without connector)
7 Special Features
00 - None
(Only required if valve has special
features, omitted if “00.”)
8 Design Code
10 - Design code
4 Voltage Type
D - DC
B - DC/with flyback diode
A - AC/with full bridge rectifier
Specifications
Ratings and Specifications
Duty Rating
Continuous from 85% to 110% of nominal voltage
Operating temperature 100°C (212°F) continuous @ nominal voltage
Lead Wires
18 gauge, standard 610 mm (24”) long, UL style 3173 CSA CL 1251
(meets SAE J1128 XLPE style SXL)
Power Rating
S Series: 20W
P Series: 23W
J Series: 23W
H Series: 29W
Encapsulent
Glass filled nylon
Magnet Wire
U.L. class N, 200°C (392°F) NEMA pub. No. MW 1000, section MW 35 – C (single)
Flyback diode (arc suppressor)
Maximum recurrent peak reverse voltage – 800 V (optional)
Environmental Protection
CAUTION
Coils may be hot
to touch if used in
continuous duty applications.
Connector
Ip65
G0: DIN 43650
Q0: Spade
Y0: Amp Jr.
W0: Wire Leads
N0: Deutsch
D0: Metri-Pack 150
J0: Metri-Pack 280
C-4.A
X
X
X
X
X
1
Passed environmental testing, but not as robust as other connectors
*Rating dependent on mating connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Ip67
Ip69k
Thermal Shock Dunk
X*
X1*
X
X
X
X
X
X
X
X1
X
X
X
ToughCoils
For 8 Size Solenoid Valves
S & P Series Coils
S Series ToughCoils part numbers - 300AA00____ (Complete Part number is 11 Digits)
G0**
Q0 W0 N0Y0 D0J0
Voltage
Connector
Connector Connector ConnectorConnector ConnectorConnector
12VDC
001A
009A 015A 021A026A 031A036A
24VDC
002A
010A 016A 022A027A 032A037A
36VDC
003A
011A 017A 023A028A 033A038A
24VAC
004A
012A
018A
–– ––
C
115VAC
005A
–­
– –– ––
230VAC
006A
– – –– ––
12VDC*
007A
013A 019A 024A029A 034A039A
24VDC*
008A
014A 020A 025A030A 035A040A
*With flyback diode. (Voltage Type B)
**DIN 43560 mating connector for “G0” style coil – 02-166796.
For other voltages and connectors contact your Eaton representative.
Std. Voltages
Amperes*
12 DC 1.67
24 DC 0.83 36 DC 0.56 24 AC 0.93 115 AC 0.19 230 AC 0.10 Voltage Type B
(+)
(-
*Nominal voltage 25°C (77°F).
P Series ToughCoils part numbers - 300AA00____ (Complete Part number is 11 Digits)
G0**
Q0 W0 N0Y0 D0J0
Voltage
Connector
Connector Connector ConnectorConnector ConnectorConnector
12VDC
041A
049A 055A 061A
066A 071A076A
24VDC
042A
050A 056A 062A
067A 072A077A
36VDC
043A
051A 057A 063A
068A 073A078A
24VAC
044A
052A
058A
–
– ––
115VAC
045A
–­
– –– ––
230VAC
046A
– – –
– ––
12VDC*
047A
053A 059A 064A069A 074A
079A
24VDC*
048A
054A 060A 065A070A 075A
080A
*With flyback diode. (Voltage Type B)
**DIN 43560 mating connector for “G0” style coil – 02-166796.
For other voltages and connectors contact your Eaton representative.
Std. Voltages
Amperes*
12 DC 1.92
24 DC 0.96 36 DC 0.64 24 AC 1.06 115 AC 0.22 230 AC 0.11 Voltage Type B
(+)
(-
*Nominal voltage 25°C (77°F).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-5.A
ToughCoils
For 10, 12, 16 and 20 Size Solenoid Valves
J & H Series Coils
300AA00____ (Complete Part number is 11 Digits)
G0**
Q0 W0 N0Y0 D0J0
Voltage
Connector
Connector Connector ConnectorConnector ConnectorConnector
12VDC
081A
089A 095A 101A
106A 111A
116A
24VDC
082A
090A 096A 102A
107A 112A
117A
36VDC
083A
091A 097A 103A108A 113A
118A
C
24VAC
084A
092A
098A
–
– –
–
115VAC
085A
–­
– –– –
–
230VAC
086A
– – –
– –
–
12VDC*
087A
093A 099A 104A
109A 114A
119A
24VDC*
088A
094A 100A 105A
110A 115A
120A
*With flyback diode. (Voltage Type B)
**DIN 43560 mating connector for “G0” style coil – 02-166796.
For other voltages and connectors contact your Eaton representative.
Std. Voltages
Amperes*
12 DC 1.92 24 DC 0.96 36 DC 0.64 24 AC 1.06 115 AC 0.22 230 AC 0.11
Voltage Type B
(+)
(-)
*Nominal voltage 25°C (77°F).*
H Series ToughCoils part numbers - 300AA00____ (Complete Part number is 11 Digits)
G0**
Q0 W0 N0Y0 D0J0
Voltage
Connector
Connector Connector ConnectorConnector ConnectorConnector
12VDC
121A
129A 135A 141A
146A 151A
156A
24VDC
122A
130A 136A 142A
147A 152A
157A
36VDC
123A
131A 137A 143A
148A 153A
158A
24VAC
124A
132A
138A
–
– –
–
115VAC
125A
–­
– –– –
–
230VAC
126A
– – –
– –
–
12VDC*
127A
133A 139A 144A
149A 154A
159A
24VDC*
128A
134A 140A 145A
150A 155A
160A
*With flyback diode. (Voltage Type B)
**DIN 43560 mating connector for “G0” style coil – 02-166796.
For other voltages and connectors contact your Eaton representative.
Std. Voltages
Amperes*
12 DC 2.42 24 DC 1.21 36 DC 0.81 24 AC 1.34 115 AC 0.28 230 AC 0.14
Voltage Type B
(+)
*Nominal voltage 25°C (77°F).
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-6.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
(-)
S and P Series Coils
J & H Series Coils
Dimensions
29,5 [1.16]
34,3 [1.35]
28,0 [1.10]
C
31,8 [1.25]
12,9 [.51]
39,7 [1.56]
G0
DIN 43650-A Connector
17,5 [0.69]
34,5 [1.36]
Shown with integrated Deutsch Connector
29,5 [1.16]
26,2 [1.03]
26,2 [1.03]
28,0 [1.10]
W0
Q0
Spade Connector
Leadwire
35,6 [1.40]
37,1 [1.46]
31,2
[1.23] 23,4
[.92]
24,9 [.98]
34,8 [1.37]
27,9 [1.10]
N0
Y0
Deutsch Male DTO4-2P integrated connector
37,6 [1.48]
35,1 [1.38]
29,7
[1.17]
AMP Junior Timer integrated connector
24,1 [.95]
D0
Metri-Pack 150 Male, integrated connector
33,9
[1.33]
25,4 [1.00]
J0
Metri-Pack 280 Male, integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-7.A
J Series Coils
Dimensions
33,5 [1.32]
(.685)
C
29,5 [1.16]
31,5 [1.24]
46,5 [1.83]
Ø 38,9 [1.53]
12,9 [.51]
G0
DIN 43650-A Connector
34,3 [1.35]
(.685)
Shown with integrated MetriPack 150 Connector
29,5 [1.16]
26,2 [1.03]
29,7 [1.17]
31,5 [1.24]
Q0
Spade Connector
W0
Leadwire
35,3 [1.39]
36,8 1.45]
34,8
[1.37]
5,1 [.20]
28,4 [1.12]
38,4 [1.51]
31,5 [1.24]
N0
Deutsch Male DTO4-2P integrated connector
35,1 [1.38]
33,3
[1.31]
Y0
AMP Junior Timer integrated connector
37,6 [1.48]
27,7 [1.09]
37,3
[1.47]
D0
Metri-Pack 150 Male, integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-8.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
28,9 [1.14]
J0
Metri-Pack 280 Male, integrated connector
H Series Coils
Dimensions
33,5 [1.32]
(.685)
29,5 [1.16]
C
31,5 [1.24]
46,5 [1.83]
Ø 38,9 [1.53]
17,6 [.69]
G0
DIN 43650-A Connector
34,3 [1.35]
(.685)
Shown with integrated MetriPack 280 Connector
29,5 [1.16]
26,2 [1.03]
29,7 [1.17]
31,5 [1.24]
Q0
Spade Connector
W0
Leadwire
35,3 [1.39]
5,1 [.20]
36,8 1.45]
34,8
[1.37]
28,4 [1.12]
38,4 [1.51]
N0
Deutsch Male DTO4-2P integrated connector
Y0
AMP Junior Timer integrated connector
37,6 [1.48]
35,1 [1.38]
33,3
[1.31]
31,5 [1.24]
27,7 [1.09]
D0
Metri-Pack 150 Male, integrated connector
37,3
[1.47]
28,9 [1.14]
J0
Metri-Pack 280 Male, integrated connector
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-9.A
R & L Series Coils
For SVx-12-3 and SVx-12-4 Solenoid Valves
L Series Coils (“EN490” Coils)
DC Coils
Connector
Voltage
“G” DIN 43650 Connector
“W” Leadwires Only
Full Power Coils:
C
12V
02-30945402-309452
24V
02-30945502-309453
Note: For more information on “L” series coils, please refer to Eaton
Technical datasheet 5049/EN/0596/A (Solenoid Operated Directional
Valve-DG4V-35, EN490 for Mobile Equipment).
R Series Coils (Blue Coils)
DC Coils
Connector
Voltage
“G” DIN 43650 Connector
“Q” SpaDe Connector
12V
507847
02-11116602-140394
24V
507848
02-11116802-140395
“W” Leadwires Only
Full Power Coils:
Note: For more information on “R” series coils, please refer to Eaton
Technical datasheet V-VLDL-MC011-E (Solenoid Operated Directional
Valve-DG4V-35 and DG4V3 Series).
R and L Series Coils
Power Consumption
DC solenoids at rated voltage and 20˚C (68˚F)
Full Power Coils:
12V30W
24V30W
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
.B
C-10.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C13 and C16 Series Coil Information
Duty Rating
FPO
Electrical
Connection
Bobbin
Encapsulation
Copper Winding
Iron Frame/Yoke
Location of “O” ring seal
between coil and tube
Wattage
C13 (for 13 mm tubes)
C16 (for 16 mm tubes)
The coil is rated for continuous operation at nominal voltage +/- 10%
and an ambient range of -20 to +40.
Note: Coil performance, force produced and power consumed, is
affected by the heat of the coil, performance figures given in this
catalogue are measured under simulated continuous duty conditions
at the coil stabilized temperature. It is important to verify the actual
conditions the valve will experience for any given application it should
be tested in situ to confirm valve selection.
Wire Insulation
The coil winding is copper magnet wire insulation equivalent to
class N (200°C).
Encapsulation Material
=
=
C13, 14 Watt coils and C16, 19 Watt coils are black in colour and
made from PBT (Black Polybutylene Reinforced) equivalent to Class F
(155°C)
14, 22 & 27 Watts
19 & 29 Watts
C13, 22 & 27 Watt coils and C16, 29 Watt coils are black in colour and
made from IXEF (Black Polyarylamide Reinforced) equivalent to Class
H (180°C)
Voltages
Standard
12 VDC 110 VRAC
24 VDC 220 VRAC
Ingress Protection (IP) BS EN 60529
Special/Optional
Other Voltages are available on request
The coil/tube joint is sealed by “O” rings preventing fluid ingress and
the possibility of tube corrosion.
Alternating Current
For AC voltage an ISO4400 rectified connector must be used,
as the coils are wound for DC. The correct connector is
available from the factory:
110 VAC = AXP9997-115
220 VAC = AXP9997-230
Different electrical connectors offer different levels of protection
the minimum being the DIN 43650 connector with a gasket at IP65.
Integrated Hydraulics offer a wide range of connector types - details
of which are available on request.
Connectors
H =ISO4400 Standard DIN43650
2 pin and earth
F =Black Flying Leads 1.5mm2 wire
VDR is fitted for over-voltage protection.
Diodes are rated at 1.5 amp.
600 mm long, 15 AWG, 2.2 mm diameter, Teflon FEP covered
(DC voltage only)
+
DC Coil
DM=Deutsch Moulded 2 way DT04-2P series
(DC voltage only).
Caution – When handling coils after or during use they may be hot
which can cause burning to the skin. Handle with care and use the
appropriate equipment.
-
AC Voltage Connector Circuit Diagram
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-11.A
C
C13 and C16 Series Solenoid Coil
C13 – H – 24 / 22
Model Code
2
1
1 Coil Series
C
4
3
3 Voltage
C13 - 13 mm tube
C16 - 16 mm tube
2 Connection
H - DIN43650 ISO Standard
F -Flying Leads
(12 and 24 VDC only)
DM -Deutsch Moulded
(12 and 24 VDC only)
(Consult factory for other options)
4 Wattage
12
12 VDC
24
24 VDC
110
110 VRAC
220
220 VRAC*
C13
14 = 14 Watt
22 = 22 Watt
27 = 27 Watt
C16
19 = 19 Watt
29 = 29 Watt
*220 to 240 VAC
All AC coils must be used with a rectifying connector:
(AXP9997-115 or AXP9997-230)
(Other voltages available on request)
We reserve the right to change
specifications without notice
C13 Coils
C16 Coils
49.0 (1.93)
47.8 (1.88)
38.1
(1.50)
50.0
(1.97)
23.9 (0.94)
22.0
(0.87)
36.0
(1.42)
35.5
(1.40)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-12.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Explosion Proof Valves
For hazardous environments
Coil Options (SV*E Series)
Specifications
Hydraulic Performance Specifications for explosion proof valves are the same as the base valve.
For details please refer to the base valve page reference.
Coil Temperature Range
-40° to 100°C (-40° to 212°F)
Coil Duty
Continuous from 85% to 110% of nominal voltage
Housing Type
Explosion proof version with 1/2" threaded conduit hub
Coil Type
Epoxy encapulated lead wire coil
Lead Wire
24" Long, 18 gauge with 1/32" cross linked Polyethylene insulation
Approvals
UL
CSA
File AU2206, Component - Industrial truck accessory, Battery powered
Both for general purpose and Hazardous locations
Class I, Group C & D
Class II, Group E, F & G
Summary
Model Code Reference
Description
Typical Application
Pressure
Rated flow
psi (bar)
Base Valve l/min (Usgpm)
Section
design
SV1E-10-C-XX-XXXXU
2 way, 2 position, normally closed, poppet type
210 (3000)
45 (12)
SV1-10-C
A
SV2E-10-C-XX-XXXXU
2 way, 2 position, normally closed, poppet type
210 (3000)
23 (6)
SV2-10-C
A
SV3E-10-C-XX-XXXXU
2 way, 2 position, normally closed, poppet type
210 (3000)
45 (12)
SV3-10-C
A
SV4E-10-C-XX-XXXXU
2 way, 2 position, normally closed, spool type
210 (3000)
23 (6)
SV4-10-C
A
SV1E-16-C-XX-XXXXU
2 way, 2 position, normally closed, poppet type
210 (3000)
132 (35)
SV1-16-C
A
SV2E-20-C-XX-XXXXU
2 way, 2 position, normally closed, poppet type
210 (3000)
227 (60)
SV2-20-C
A
SV4E-10-0-XX-XXXXU
2 way, 2 position, normally open, spool type
210 (3000)
23 (6)
SV4-10-0
A
SV3E-10-0-XX-XXXXU
2 way, 2 position, normally open, poppet type
210 (3000)
45 (12)
SV3-10-0
A
SV5E-10-0-XX-XXXXU
2 way, 2 position, normally open, poppet type
210 (3000)
45 (12)
SV5-10-0
A
SV3E-16-0-XX-XXXXU
2 way, 2 position, normally open, poppet type
210 (3000)
132 (35)
SV3-16-0
A
SV3E-20-0-XX-XXXXU
2 way, 2 position, normally open, poppet type
210 (3000)
227 (60)
SV3-20-0
A
SV1E-10-3-XX-XXXXU
3 way, 2 position, spool type
210 (3000)
23 (6)
SV1-10-3
A
SV1E-10-4-XX-XXXXU
4 way, 2 position
210 (3000)
23 (6)
SV1-10-4
A
SV2E-10-4-XX-XXXXU
4 way, 2 position, circuit center
210 (3000)
23 (6)
SV2-10-4
A
SV3E-10-4-XX-XXXXU
4 way, 2 position, normally open
210 (3000)
23 (6)
SV3-10-4
A
SV4E-10-4-XX-XXXXU
4 way, 2 position, tandem center
210 (3000)
23 (6)
SV4-10-4
A
Replacement Coil Part Numbers
Voltage
Assembly Number
Amperes (A)
Power (W)
Lead Color
12 VDC
888831
1.50
20
Red
24 VDC
888832
0.75
20
Black
36 VDC
888834
0.50
20
Blue
48 VDC
888835
0.38
20
Purple
110 VDC
888836
0.16
20
Brown
24 VAC
888837
0.75
20
Orange
115 VAC
888838
0.16
20
Yellow
230 VAC
888840
0.08
20
Red/White
480 VAC
888841
0.04
20
Black/White
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-13.A
C
Explosion Proof Valves (SV*E Series) Model Code
Model Code
SV*E-**(V)-*
***
****
U
1
2
3
4
1 Base Valve
C
SV1E-10-CSV1-10-C
SV2E-10-CSV2-10-C
SV3E-10-CSV3-10-C
SV4E-10-CSV4-10-C
SV1E-16-CSV1-16-C
SV2E-20-CSV2-20-C
SV4E-10-0SV4-10-0
SV3E-10-0SV3-10-0
SV5E-10-0SV5-10-0
SV3E-16-0SV3-16-0
SV3E-20-0SV3-20-0
SV1E-10-3SV1-10-3
SV1E-10-4SV1-10-4
SV2E-10-4SV2-10-4
SV3E-10-4SV3-10-4
SV4E-10-4SV4-10-4
For performance specifications
refer to base valve data sheet.
Viton® seal options are available.
2 Port Size Housing Number
4 Type (C.S.A. Approved)
Refer to table in Model Code for Base valves
4.8 liters/min
U - 1/2" NPT Connector
Class I, Group C & D
Class II, Group E, F & G
3 Voltage*
Code
Voltage
Replacement Coil
Part Number
12D
12 VDC
888831
24D
24 DVC
888832
36D
36 VDC
888834
48D
48 VDC
888835
110D
110 VDC
888836
24A
24 VAC
888837
115A
115 VAC
888838
230A
230 VAC
888840
460A
460 VAC
888841
*Arc suppression diode is not available
Description Type
Dimensions
mm (inch)
Note: Cartridge only or coil
housing are not available as
service parts. It is not possible to convert standard
valves to explosion proof
variants. SV1E-10-3 shown.
Dimensions of coil housing are
the same for all Vickers explosion proof SiCV valves, for
other dimensions please refer
to base valve datasheet.
50,8
(2.0)
53,9
(2.125)
31,8
(1.250)
"U" 0.5" N.P.T. Connector
(24" Long Leads 18 GA.)
68,3
(2.69)
1.31 Hex
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
.B
C-14.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
EPV Series Proportional Valve Coils
EPV Coils
Control and specifications
Rheostat
Power plug options
Amplifier card
Joystick suppliers
12 VDC operation 10-12 , 20-25 watts
24 VDC operation 25-30 , 20-25 watts
EHH-AMP-702, EPAD-SA-1A6-10
(Require 24 VDC power supply to power plug and 12 VDC coil)
EEA-PAM-523
(Requires 24 VDC power supply and either 12VDC or 24 VDC coil)
OEM Controls, Inc, Shelton, CT
P-Q Controls, Inc, Bristol, CT
Std. Voltages Amperes*
Lead Color
Power Rating
12 DC 24 DC 1.32 .66 red
black
16 W
16 W
*Nominal voltage @ 25°C (77°F).
Coil part numbers
F Q U*W
Voltage Connector ConnectorConnectorConnector
12VDC
24VDC
02-308810 02-31715402-15407002-154072
02-308811 02-31715502-15407102-154073
Y
Connector
02-308808
02-308809
*DIN 43650 mating connector for “U” style coil – 02-166796.
Coil Configurations
“F”- Weather-Pack
male on leads
”Q“ - Spade terminal
”U“– DIN 43650
CAUTION
Coils may be hot
to touch if used in
continuous duty
applications.
”W“ 610 mm
(24 inch) lead wire
“Y”- Metri-Pack
150 male on leads
Note: Width –
all configurations
Ø 43,5
(1.71)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-15.A
C
EFV Series Proportional Valve Coils
EFV
M Series Coils
Control and Specifications
Power plug options
EHH-AMP-702
(Requires 24 VDC power supply to power plug and 12 VDC coil)
EHH-AMP-712
(Requires 12 VDC power supply to power plug and 12 VDC coil)
DIN Rail Module
EHH-PAM-600
(Requires 24 VDC power supply and 12VDC)
C
CAUTION
Coils may be hot
to touch if used in
continuous duty
applications.
Coil Model Code
Specifications
Standard Voltage
12 VDC
24 VDC
MCSC
*** ***
1
1 Function
MCSC - Solenoid Coil
Resistance
4.7 Ω
19.0 Ω
2
3
Power
30 W
30 W
*
**
**
**
**
4
5
6
7
8
3 Voltage Rating
4 Voltage Type
6 Lead Length
D - DC
012 - 12 volt
024 - 24 volt
2 Series
5 Connector
M - Size 10 (210 Bar)
G0 - ISO 4400 DIN 43650
W0 - Flying lead
C0 - Deutsch Male, DT04-2P,
On wire leads
0 - None
A - 152mm [6.0 in] (standard
length with connector)
B - 610mm [24.0 in] (standard
length without connector)
K - 127mm [5.0 in]
Note: Auxiliary parts for mating
connectors may be required.
DIN 43560 mating connector for “G”
style coil – 02-166796.
Coil Kits
53.3
(2.10)
Ø 20,7
(0.815)
Part Numbers
Model Code
Assembly
Number
54.6
MCSC012DGE006034440-001
(2.15)
MCSC024DGE006034440-002
MCSC012DWE006034441-001
MCSC012DCE066034442-002
SC-024BGE004995052-232
56,134
(2.21)
Ø 44,2
(1.74)
Standard Coil 53.3
(2.10)
SC-024BWE004995052-233
SC-024DGE004995052-003
54.6
(2.15)
Note: Width all
56,134
configurations
(2.21)
Note: Width all configurations
“G” - DIN 43650
Ø 44,2
(1.74)
“W” - 610 mm
(24 inch) lead
wire
Note: Width all
“C” - Deutsch
DT0402P on
leads
Where measurements are critical request certified drawings.
We reserve the right to configurations
change specifications without notice.
Ø 20,7
C-16.A
(0.815)
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Electronic Controls
Proportional Valve
Control Power Plugs
EHH-AMP-702-D/K-* Series
Application
General Description
Features and Benefits
For use with valve types:
Primary applications
are in the control of
non-feedback proportional
valves where the cost of
more sophisticated electronic
controls can be avoided.
Three types of plugs,
conforming to ISO 4400/DIN
43650 interface, with integral
amplifiers and necessary
adjustment potentiometers,
are designed for use with
non-feed back hydraulic valves.
• Integral amplifier provides
essential functions for
control of proportional valves
EPV**-12D-1*
EFV1-**-012DE*
ERV1/2**-12D-1*
EPRV1/3**-12D-1*
ESV1**-12D-1*
Type J is typically used in
closed-loop applications.
IRV**-012D-1*
PFR21*
PFR24*
PDR21A*
This plug/valve combination
offers very low cost solutions
to many hydraulic control
problems requiring
proportional control.
Type D is controlled with a
0-10V command signal, and
has adjustable gain, ramp,
deadband compensation
and dither.
PPD22**-012D-1*
For closed-loop and no ramp
applications adjust the ramp
port to minimum setting.
• Adjustable ramp time (types
D and K), gain, deadband
compensation and dither
•E
ase of installation, with
reduced cost
•F
ully short-circuit and
reverse-polarity protected
•D
ifferential voltage command
signal (type D)
• Adjustable dither
•E
MC to latest
European standards
• Protection to IP67
Type K is controlled with a
4-20 mA command signal, and
has an adjustable ramp time
of 50 ms to 5s.
Electrical Block Diagram
Electrical Block Diagram
EHH-AMP-702-D/K-*
Note: This product has been
designed and tested to meet
specific standards outlined in
the European Electro-magnetic
Compatibility Directive (EMC)
89/336/EEC, amended by
91/26/EEC, 92/31/EEC and
93/68/EEC, article 5. For
instructions on installation
requirements to achieve
effective protection levels, see
this leaflet and the Installation
Wiring Practices for Vickers
Electronic Products leaflet
2468. Wiring practices relevant
to this Directive are indicated
by a warning symbol and
Electromagnetic Compatibility
(EMC).
Connection Diagram
Connection diagram for CAN version (EHH-AMP-702-N-C-N-3-30)
Pin Number
Description
1
2
3
4
5
CAN Shield
Supply Positive
Supply GND
CAN H
CAN L
Connection diagram for RS232 Versions (EHH-AMP-7XX-X-R-P-X-30)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Connector
Pin Number
Description
Supply
Connector
1
2
Supply Positive
Supply GND
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-17.A
.B
C
Model Code/
Operating Data
Model Code
1 Adjustment Range
EHH - AMP - 702 - * - R - P - * - 30
1
2
D-P
roportional plug:
0-10 VDC with ramp
K-P
roportional plug:
4-20 mA with ramp
2 Cable Gland
1 - PG9
2 - M16
C
Operating Data
Electrical
Types D
Connections
1
24V DC
2
Supply GND
3
Positive command signal
4
Negative command signal
Power (input) supply 18-36V DC including ± 10% maximum ripple
(peak-to-peak)
24V DC nominal
Absolute maximum voltage
40V
Max. power consumption
35W
including solenoid
Reverse polarity protected
Yes
Short circuit protected
Yes
Maximum output current
1,6A
Maximum output voltage typical Typically 1,5V below supply voltage
(1,6A output current)
Command signal
0-10V (10 kohms)
Deadband triggering
200 mV
For output (LED on)
200 mV to 10V
For no output (LED off)
0 mV to 100 mV
Deadband adjustment range
100 to 1000 mA
Gain adjustment range
0.02A/V to 0.16A/V
Dither adjustment range
0 to 500 mA
Ramp time (types D and K only)
50 ms to 5s
PWM frequency
1200 Hz ± 10%
Dither frequency
120 Hz ± 10%
Protection
IEC 529: IP67 (when correctly installed with
interface seal in place) Fully short-circuit and
reverse-polarity protected
Isolation to VDE 0110
Group “B”
Electromagnetic compatibility (EMC):
Emission
EN 50081-2
Immunity
EN 50082-2
Mechanical
Housing
Mounting interface
Cable clamp
Cable diameter
Wire section
Temperature, ambient range
Mass
PA6 glass-reinforced plastic
(conforming to UL-94HB). Color: gray
ISO 4400 (DIN 43650)
Pg9 screw type
Ø 5 to 10 mm (0.197 to 0.394” dia.)
0,5 to 1,0 mm2 (20-17 AWG)
-20° to +70°C (-4° to +158°F)
0,07 kg (0.154 lb)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
.B
C-18.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Type K
4-20 mA (250 ohms)
4 mA
4-20 mA
0-4 mA
0.01 A/mA to 0.08 A/mA
Installation Data
Input/Output
Characteristics
Type K and D
Type J
Type
K and D signal
Command
Command
Type K signal
Type D
20KmA Type 10V
Type
D
8V
20 mA
12 mA 10V 6V
8V 4V
6V 2V
12 mA
4 mA
4V
2V
4 mA
Output
current
Output
current
Ramp
setting
Ramp
setting
USX
Gain setting
USX
Deadband
Gain setting
compensation
Deadband
compensation
J
Type
Command
signal
Command
voltage U s
signal
voltage U s10V
8V
10V 6V
8V 4V
6V 2V
4V
Time
2V
Time
Output
current
Output
current
Time
Time
C
Time
Time
USX
Gain setting
USX
Deadband
Gain setting
compensation
Deadband
compensation
Time
Time
Installation Dimensions
mm (inch)
88 (3.52)
88 (3.52)
22
(0.87)
22
(0.87)
3rd angle
projection
3rd angle
projection
Solenoid Connections
39
(1.54)
39
(1.54)
Solenoid Connections
No connection
1 (or 2)
No connection
1 (or 2)
2 (or 1)
1
2 (or 1)
1
38
(1.5)
38
(1.5)
2
2
34
(1.34)
34
(1.34)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
.B
C-19.A
1 – PG9 cable clamp
2 – M16 cable clamp
3 – M12 5 pin connector
Installation Data
•
Protection to IP67
•
Available with CANOpen communications
Features and Benefits
•
Integral amplifier provides essential functions for control
of proportional valves.
•
Adjustable ramp time, gain, dead band compensation
through potentiometer or RS232/CAN communication (via
software).
•
Ease of installation, with reduced cost.
Ramp time: Turn clockwise
Terminal 1: Power Supply
Fully
short-circuit
and reverse-polarity
to increase
ramp time
18-36Vprotected.
DC, positive.
•
•
•
•
C
Application
•
Designed for the control of direct-operated, non-feedback, proportional valves where the cost of more complex electronic controls can be avoided.
Adjustments
(Only types D/K).
Terminal 2: Power Supply 0V.
Differential voltage command signal.
Gain: Turn clockwise to
Terminal 3: Command
increasewith
gain.RS232 and CAN communication.
Options
signal positive
Deadband
compensation
:
(see ”Operating Data“).
Peak
and Hold
Functionality.
Turn clockwise to increase
•
Terminal 4: Command
deadband
PG9,
M16 compensation
cable clamp and M12signal
connector
options.
negative
•
Adjustable
dither.
Dither: Turn clockwise to
current.
(see ”Operating Data“).
increase the dither current.
Wiring
Diagrams
Wiring
Diagrams
Set-up
Procedure
s product has been designed and tested to meet specific standards outlined in the European Electromagnetic Compatibility
ective (EMC) 89/336/EEC, amended by 91/263/EEC, 92/31/EEC and 93/68/EEC, article 5. For instructions on installation
quirements to achieve effective protection levels, see this leaflet and the Installation Wiring Practices for Vickers Electronic
oductsThis
leaflet
2468. Wiring
practices
relevanton
tothe
this
Directive
indicated
by Electromagnetic
Compatibility
(EMC).
procedure
describes
the adjustments
Power
Plug areband.
Adjusting
the power plug allows
the dead-band
to be
for setting the dead-band, gain and ramp rate on a non-feedelectronically eliminated (dead-band Compensation) by makback proportional valve. Proportional valves with over-lapped
ing the spool jump across the dead-band when a small input
Installation Wiring Options
spools have a range of spool travel where there is no flow
signal is applied to the power plug.
from the valve. This range of spool motion is called dead-
The gain of the valve is the ratio of the opening of the valve
(or flow rate from it) to the applied voltage input to the power
plug. The ramp rate is the rate at which the power plug allows
the valve to open (or close) when a step voltage input is applied to the power plug. In many applications this ramp would
be used to gradually accelerate or decelerate an actuator.
Installation precautions to eliminate leaks into the power
plug:
•
•
Ensure that sealing grommet is present and installed
correctly. It must be forced over the outer jacket of the
cable.
•
Ensure that all the gaskets are present and properly
seated.
•
Ensure that the plastic cover seats firmly and correctly on
the center body post.
Use only cables with circular cross-sections and diameter
between 5–10 mm (.2” - .4”)
EATON DPPP Catalog October 2011
2
WARNING
•�
Electromagnetic Compatibility (EMC) - Screened
cables should be used and particular attention paid
to the grounding of the screens as shown in the
above diagrams.
For EHH-AMP-7X2-N-C-N-3-30
wiring
diagram
please
the conNote:Note:
For EHH-AMP-7X2-N-C-N-3-30
wiring
diagram
please
referrefer
the connection
diagram
forsame.
the same.
nection
diagram
for the
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
.B
C-20.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Connection diagram for CAN version (EHH-AMP-702-N-C-N-3-30)
Warning:
Electromagnetic
Compatibility
Warning:
Electromagnetic
Compatibility
(EMC)(EMC)
Installation Data
Assembly Showing
Wiring Connection Points
WARNING
Ensure cable clamp
nut is adequately
tightened to
secure cable. Do not connect,
or disconnect, the plug while
power is on. Do not mount, or
dismount, the plug while power
is on.
•�
Assemblies
C
*All seals must be fitted correctly at plug installation to provide protection to IP67 (IEC 529).
Warning:
•
Ensure cable clamp nut is adequately tightened to secure the cable.
•
Where power
measurements
are critical request certified drawings. We reserve the right to change specifications without notice.
Do not connect, or disconnect, the plug while
is on.
•
Do not mount, or dismount, the plug while power isEATON
on. Screw-In Cartridge Valves E-VLSC-MC001-E2
May 2015
.B
C-21.A
Installation Data
Start-Up Procedure
C
• With the plug correctly wired
but not mounted to the load
provide with a DC power
supply (See table).
•S
witch on the power supply.
Apply the command signal.
• Apply the command signal
(ON) and check the Power
ON LED (RED) illuminates.
Reduce the signal to the
Command signal (OFF) level
and check the LED (RED)
goes out.
(b)Observe PWM LED
(Orange) is ON.
• If there is malfunction to the
LED replace the plug.
•Successful completion of
these steps means that the
plug and load are ready for
normal use.
•S
witch off the power supply and command signal
and connect the plug to the
load. Ensure that the interface seal is correctly fitted
and clamped between the
mounting faces (essential for
IP65 protection). Tighten the
retaining screw.
(a)Observe Power On LED
(RED) is ON.
Spare Parts
Ordering Procedure
The only spare part available is
the interface seal, part number
732100.
Order plug by full model code,
and spare interface seals by
part number 732100.
If LED is not operated then
there is short circuit in the
load. Replace the load/load
coil.
•E
nsure that no damage
or injury will occur on the
machine when the valve is
operated.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
.B
C-22.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Electronic Controls
“Soft Switch” Power Plugs
EHH-AMP-702-C-*
10 Series
For use with valve types:
EPV**-12D-1*
EFV1-**-012DE*
ERV1/2**-12D-1*
EPRV1/3**-12D-1*
ESV1**-12D-1*
IRV**-012D-1*
PFR21*
Application
General Description
Features and Benefits
Focus applications for this plug
are in the control of hydraulic
solenoid operated directional
and pressure control valves
where control of valve response
time can significantly reduce
shocks in the hydraulic system.
These plugs, conforming to
ISO 4400/DIN 43650 interface,
offer adjustable, ramped on/off
switching times through the
use of an integral amplifier.
• Integral amplifier provides
control from on/off logic
command signal
Best results in reducing
hydraulic shocks will only be
obtained by using valves with
the right “low shock”, or “
proportional” features.
The soft switch plug is rated
for 24V DC nominal and
controlled by a 24V logic
signal. Applying an “on” signal
causes the output current to
ramp up to, and stay at, an
adjustable maximum while the
“on” signal is maintained. At
“switch-off” the output current
is ramped down to zero and
will remain at zero until the
next “on” signal.
PFR24*
PDR21A*
PPD22**-012D-1*
The switching time range
is 50 ms to 5 seconds.
• Adjustable ramp time
• Deadband compensation
• Adjustable output level
• Adjustable dither
•E
MC to latest European
standards
• Improved switching time
repeatability
•F
ully short-circuit and
reverse-polarity protected
• Protection to IP67
Ramp times (switching times)
can be adjusted by an in-built
potentiometer.
An adjustment also allows
for compensation of any
deadband in the valve.
Electrical Block Diagram
EHH-AMP-702-C-*
10 Series
Note: This product has been
designed and tested to meet
specific standards outlined in
the European Electro-magnetic
Compatibility Directive (EMC)
89/336/EEC, amended by
91/26/EEC, 92/31/EEC and
93/68/EEC, article 5. For
instructions on installation
requirements to achieve
effective protection levels, see
this leaflet and the Installation
Wiring Practices for Vickers
Electronic Products leaflet
2468. Wiring practices relevant
to this Directive are indicated
by a warning symbol and
Electromagnetic Compatibility
(EMC).
Power
input
24V DC +
0V –
1
2
Gain
2k7W
Command
Signal
X1
Dither
3
4
(NC)
Ramp
Max.
limiter
Power
PWM amp.
Solenoid
X2
Deadband
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
.B
C-23.A
C
Model Code/
Operating Data
Model Code
EHH - AMP - 702 - C - *
C
Operating Data
Electrical
Connections
1
24V DC
2
OV (power and signal)
3
Positive command signal
4 Negative command signal
Power (input) supply 18 - 36V DC including ± 10% maximum ripple
ripple (peak-to-peak)
24V DC nominal
Absolute maximum voltage
40V
Max. power consumption
35W
including solenoid
Reverse polarity protected
Yes
Short circuit protected
Yes
Maximum output current
1,6A
Maximum output voltage typical Typically 1,5V below supply voltage
(1,6A output current)
Command signal
For output (LED on)
11 to 24V
For no output (LED off)
0V to 5V
Input impedance
10 KOhm ohms
Deadband adjustment range
<100 - 1000 mA
Gain adjustment range
0.02A to 1,6A (maximum)
Dither adjustment range
0 to 500 mA
Ramp time
50 ms to 5s
PWM frequency
1200 Hz ± 10%
Dither frequency
120 Hz ± 10%
Protection
IEC 529: IP67 (when correctly installed
with interface seal in place)
Fully short-circuit and reverse-polarity protected
Isolation to VDE 0110
Group “B”
Electromagnetic compatibility (EMC):
Emission
EN 50081-2
Immunity
EN 50082-2
Mechanical
Housing
Mounting interface
Cable clamp
Cable diameter
Wire section
Temperature, ambient range
Mass
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
.B
C-24.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
PA6 glass-reinforced plastic
(conforming to UL-94HB). Color: gray
ISO 4400 (DIN 43650)
Pg9 screw type
Ø 5 to 10 mm (0.197 to 0.394” dia.)
0,5 to 1,0 mm2 (20-17 AWG)
-20° to +70°C (-4° to +158°F)
0,07 kg (0.154 lb)
Installation Data
Input/Output Characteristics
Type K and D
Functions
Type J
Command signal
Switch-on/off: after
Type K
Type D
switching on with a
20 mA
10V
11V signal the amplifier
8V
will remain in the “on”
6V
12 mA
4V
condition with a command
2V
signal above 6V. The
4 mA
command signal must
be reduced to below 5V Output
to achieve switch-off of
current
the amplifier.
Command
signal
24V,
typical
Time
Command
signal
voltage U s
10V
8V
6V
4V
2V
Time
Output
current
Ramp
setting
Output
Ramp time
currentUSX
Gain setting
Deadband
compensation
Time
Time
Gain
adjustment
USX
Gain setting
Deadband
compensation
Deadband compensation
Time
Time
Installation Dimensions
mm (inch)
88 (3.52)
22
(0.87)
3rd angle
projection
Solenoid Connections
39
(1.54)
1 (or 2)
No connection
2
34
(1.34)
2 (or 1)
1
38
(1.5)
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
.B
C-25.A
C
Installation Data
e – Cable connection option
1 – PG9 cable clamp
2 – M16 cable clamp
3 – M12 5 pin connector
Adjustments
Features and Benefits
•
•
C
Ramp time: Turn clockwise
to increase ramp time.
Gain:functions
Turn clockwise
to
Integral amplifier provides essential
for control
increase gain.
of proportional valves.
Deadband compensation:
Adjustable ramp time, gain, dead
band
compensation
Turn
clockwise
to increase
through potentiometer or RS232/CAN
communication
deadband
compensation (via
software).
current.
•
Dither:
Ease of installation, with reduced
cost.Turn clockwise to
•
Fully short-circuit and reverse-polarity protected.
•
Differential voltage command signal.
•
Options with RS232 and CAN communication.
•
Peak and Hold Functionality.
•
PG9, M16 cable clamp and M12 connector options.
•
Adjustable dither.
•
EMC to latest European standards.
•
Protection to IP67
• Terminal
Available
with CANOpen
communications
1: Power
Supply
18 - 36V DC, positive.
Application
Terminal 2: Power Supply 0V.
• Terminal
Designed
for the
control of direct-operated, non-feed3: Switch
command
signal
positive.
back,
proportional valves where the cost of more complex electronic
controls can be avoided.
Terminal
4: Not connected
increase the dither current.
is product has been designed and tested to meet specific standards outlined in the European Electromagnetic Compatibility
Installation
Wiring amended by 91/263/EEC, 92/31/EEC and 93/68/EEC, article 5. For instructions on installation
ective (EMC)
89/336/EEC,
quirements to achieve effective protection levels, see this leaflet and the Installation Wiring Practices for Vickers Electronic
oductsThis
leaflet
2468. Wiring
practices
relevant
tothe
this
Directive
indicated
by Electromagnetic
Compatibility
(EMC).
24V
procedure
describes
the adjustments
on
Power
Plug areband.
Adjusting
the power plug allows
the dead-band
to be
0V
for setting the dead-band,
electronically eliminated (dead-band Compensation) by makWARNING gain and ramp rate on a non-feed>11 V
back proportional valve. Proportional valves
with over-lapped
ing the spool jump across the dead-band when a small input
Electromagnetic
spools have
of
spool
travel
where
there
is
no
flow
signal is applied to the power plug.
•� a range
Compatibility (EMC)
from the valve. -This
range
of
spool
motion
is
called
deadScreened cables
Protective ground connection
4 3 2 1
Set-up Procedure
should be used and particular
attention paid to the grounding
of the screens as shown in the
above diagram.
The gain of the valve is the ratio of the opening of the valve
(or flow rate from it) to the applied voltage input to the power
plug. The ramp rate is the rate at which the power plug allows
the valve to open (or close) when a step voltage input is applied to the power plug. In many applications this ramp would
be used to gradually accelerate or decelerate an actuator.
Installation precautions to eliminate leaks into the power
plug:
•
•
Ensure that sealing grommet is present and installed
correctly. It must be forced over the outer jacket of the
cable.
•
Ensure that all the gaskets are present and properly
seated.
•
Ensure that the plastic cover seats firmly and correctly on
the center body post.
Use only cables with circular cross-sections and diameter
between 5–10 mm (.2” - .4”)
EATON DPPP Catalog October 2011
2
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
.B
C-26.A
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Installation Data
Assemblies
Assembly Showing
Wiring Connection Points
WARNING
Ensure cable clamp
nut is adequately
tightened to secure
cable. Do not connect, or
disconnect, the plug while
power is on. Do not mount,
or dismount, the plug while
power is on.
•�
C
*All seals must be fitted correctly at plug installation to provide protection to IP67 (IEC 529).
Warning:
•
Ensure cable clamp nut is adequately tightened to secure the cable.
•
Do not connect, or disconnect, the plug while power is on.
•
Do not mount, or dismount, the plug while power is on.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
C-27.A
.B
Installation Data
Start-Up Procedure
•C
orrectly wire the plug and,
before mounting it on the
valve solenoid, apply 24V
DC (18 to 36V limits) to the
“power input” terminals.
C
•C
heck for correct plug
function by illumination/
non-illumination of the LED:
a. Apply less than 2 to 3
volts to the input terminal:
LED should not be
illuminated.
b. Increase voltage: the LED
should illuminate when
the voltage reaches 11V.
Do not exceed 30V
command signal.
c. D
ecrease voltage: the LED
should go off when the
voltage is less than 5V.
•S
witch off power supply and
command/input signal and
then install plug on solenoid.
Ensure that all seals are
fitted correctly and clamped
as the retaining screw is
tightened: this is essential in
providing IP67 protection.
Spare Parts
Ordering Procedure
The only spare part available is
the interface seal, part number
732100.
Order plug by full model code,
and spare interface seals by
part number 732100.
•E
nsure that the hydraulic
system will not cause any
erratic movement of
actuators, then:
–S
witch on power
supply again.
–R
epeat LED/function
check as in 2.
An LED malfunction now
indicates a short circuit at
the load.
•S
uccessful completion of
these checks means that
the plug and load are ready
for use.
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
C-28.A
.B
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising