JP5030SJ GE 30" Built-In Touch-Control Electric Cooktop

JP5030SJ
GE® 30" Built-In Touch-Control Electric Cooktop
Dimensions and Installation Information (in inches)
Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a 15"
minimum from cooktop to adjacent overhead
cabinets. Units are furnished with a 48" flexible
armored cable.
Note: 30" Ribbon cooktops are approved for use
over select GE 27" and GE 30" Single Wall Ovens
and Warming Drawers. Refer to cooktop and wall
oven/warming drawer installation instructions
packed with product for current dimensional data.
If installed with a GE Telescopic Downdraft System,
consult both the cooktop and downdraft installation
instructions packed with product before installing.
Cooktop gas/electric supply may need to be re-routed
to install downdraft. The countertop cutout requires
23-1/2” minimum flat countertop surface and 25”
minimum total countertop depth. In addition, other
clearances to front edge of the countertop must be
considered. Before installing, consult installation
instructions packed with product for ­current
dimensional data.
Cutout filler trim kit: A filler trim kit
is available for use if your countertop cutout is
larger than the dimension shown, up to 29-13/16" x
20-7/16". Order JXTR32B for black or JXTR32W for
white, to reduce the cutout opening for installation
of this cooktop. These kits may be ordered from your
GE Appliances Dealer.
PP9030SJ, PP7030SJ, JP5030SJ
Approximate Cooking Dimensions
21"
29-7/8"
3-1/4" at front of unit and
6" at conduit location
13" MAX. depth of unprotected
overhead cabinets (when no
hood or microwave is installed)
Cooktop
28"
19-1/4"
19-5/8" to
19-3/4"
28-1/2" to
28-5/8"
1-3/4" MIN.
to rear wall
30" MIN. from countertop to
unprotected cabinet (when
no hood or microwave is
installed)
15" MIN. height from countertop
to nearest cabinet (including
light rails) on both sides of
cooktop
2-1/2" MIN.
Required
Electrical junction box 16" MIN.
below countertop
To insure accuracy, it is best to make a
template when cutting the opening in the counter
2" MIN. clearance
to side wall from cut-out
on left sides of unit and
1-1/2" clearance on
right side of unit
KW Rating
240V 7.3
208V 6.3
Amperage
240V 30.4 Amps†
208V 30.4 Amps†
Note: Check local codes
for required breaker size
†
For answers to your Monogram, GE Profile™ Series
or GE® Series appliance questions, visit our website
at geappliances.com or call GE Answer Center
service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 11/15
JP5030SJ
GE® 30" Built-In Touch-Control Electric Cooktop
Features and Benefits
Four radiant cooking elements - Cook foods quickly and evenly on
this sleek, glass surface
Digital touch controls - Accurately control your heating and enjoy
an easy to clean surface
6"/9" Power Boil element - Use different pan sizes on this single,
3,100-watt flexible element that produces rapid powerful heat
SyncBurners - Control two 7" elements simultaneously to evenly heat
large cookware or griddles*
Kitchen timer - Helps coordinate meal preparation and cooking
Keep Warm setting - Keep food warm with GE Appliances' lowest heat
setting or boil water in minutes with this fully functional 6" element
Melt setting - Gently melt delicate foods without burning
or scorching
Control lock capability - Protects against unintended activation
Red LED display with black glass surface and stainless steel
trim - Achieve a modern look that complements the entire kitchen
and other stainless steel appliances
JP5030SJSS
*Optional Stainless Steel Clad
Aluminum Griddle
Achieve even results with this lightweight griddle,
tailored to fit GE SyncBurners. Order part
numberJXGRIDL1 from your GE Dealer.
Hot surface indicator lights - Know when elements are too hot to
touch with a quick glance
Model JP5030SJSS - Stainless steel
Specification Revised 11/15

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project