Installation Guide: TPMC-3X-BTP
Crestron TPMC-3X-BTP
Battery Pack for TPMC-3X, TPMC-3X-LP
& MTX-3
Installation Guide
Battery Pack
Crestron TPMC-3X-BTP
This document was prepared and written by the Technical Documentation department at:
Contents
Battery Pack for TPMC-3X, TPMC-3X-LP & MTX-3: TPMC-3X-BTP
1
Introduction ............................................................................................................................... 1
Features and Functions ................................................................................................ 1
Specifications .............................................................................................................. 2
Physical Description.................................................................................................... 3
Setup .......................................................................................................................................... 4
Removal ...................................................................................................................... 4
Installation ................................................................................................................... 4
Charging ...................................................................................................................... 6
Storage......................................................................................................................... 6
Disposal....................................................................................................................... 6
Resources................................................................................................................................... 7
Reference Documents.................................................................................................. 7
Further Inquiries .......................................................................................................... 7
Future Updates ............................................................................................................ 7
Return and Warranty Policies .................................................................................................... 8
Merchandise Returns / Repair Service ........................................................................ 8
Crestron Limited Warranty.......................................................................................... 8
Regulatory Compliance
As of the date of manufacture, the TPMC-3X-BTP has been tested and found to comply with specifications for
CE marking and standards per EMC and Radiocommunications Compliance Labelling.
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo and Isys are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities
claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
©2012 Crestron Electronics, Inc.
Installation Guide – DOC. 6796D
Contents • i
Crestron TPMC-3X-BTP
Battery Pack
Battery Pack for TPMC-3X,
TPMC-3X-LP & MTX-3:
TPMC-3X-BTP
Introduction
The TPMC-3X-BTP is a replacement lithium polymer rechargeable
battery pack for the Isys® TPMC-3X and TPMC-3X-LP Handheld WiFi
Touch Screens and the Isys MTX-3 Handheld Wireless Touch Screen.
The battery pack is easily replaced from the rear of each handheld device.
Features and Functions
• Lithium polymer rechargeable battery pack for the TPMC-3X,
TPMC-3X-LP and MTX-3 Handheld Touch Screens
• Can be charged when TPMC-3X or MTX-3 is mounted in the
TPMC-3X-DS or MTX-3-DS Docking Station/Chargers
(respectively) and TPMC-3X-DSW Wall Mount Docking
Station (sold separately) and when the TPMC-3X-LP is
mounted in its docking station/charger
NOTE: For more information on the TPMC-3X and TPMC-3X-LP
touch screens, refer to the latest version of the TPMC-3X Series
Handheld WiFi Touch Screen Operations Guide (Doc. 6789). For more
information on the MTX-3, refer to the latest version of the MTX-3
Handheld Wireless Touch Screen Operations Guide (Doc. 7066). They
are available from the Crestron® Web site (www.crestron.com/manuals).
Installation Guide – DOC. 6796D
Battery Pack: TPMC-3X-BTP • 1
Battery Pack
Crestron TPMC-3X-BTP
NOTE: For more information on the TPMC-3X-DS,
TPMC-3X-DSW and MTX-3-DS, refer to the latest version of the
TPMC-3X-DS Desktop Docking Station/Charger guide (Doc. 6791),
TPMC-3X-DSW Wall Mount Docking Station guide (Doc. 6816) and
MTX-3-DS Desktop Docking Station/Charger guide (Doc. 7077).
Specifications
Specifications for the TPMC-3X-BTP are listed in the following table.
TPMC-3X-BTP Specifications
SPECIFICATION
Battery
Composition
Output Voltage
Capacity
Usage Per Charge
Charging Time
Cycle Life
Weight
2 • Battery Pack: TPMC-3X-BTP
DETAILS
Lithium polymer
3.7 Volts DC
1000 mAh
5 hours continuous at full
brightness
2 hours
>300 cycles (80% capacity)
0.8 oz (21 g)
Installation Guide – DOC. 6796D
Crestron TPMC-3X-BTP
Battery Pack
Physical Description
The TPMC-3X-BTP has a multi-pin connector for attachment inside the
battery compartment of the TPMC-3X, TPMC-3X-LP or MTX-3.
TPMC-3X-BTP Physical View
Installation Guide – DOC. 6796D
Battery Pack: TPMC-3X-BTP • 3
Battery Pack
Crestron TPMC-3X-BTP
Setup
Removal
NOTE: To prevent damage to multi-pin connector and wiring, use care
when handling the TPMC-3X-BTP.
Perform the following procedure to remove the existing TPMC-3X-BTP
from a TPMC-3X, TPMC-3X-LP or MTX-3 touch screen:
1. Place the touch screen with the screen side down on a clean, soft
surface.
2. Remove the battery compartment cover on the rear of the touch
screen.
3. Lift the TPMC-3X-BTP out of the battery compartment, to gain
easier access to the multi-pin connector.
4. Using the flat end of a small slot head screwdriver, gently pry the
multi-pin connector off the corresponding connector in the battery
compartment of the touch screen.
Installation
After completing removal of the old TPMC-3X-BTP from the touch
screen (refer to “Removal” above), perform the following procedure to
install the TPMC-3X-BTP in a TPMC-3X, TPMC-3X-LP or MTX-3
touch screen:
1. Carefully connect the multi-pin connector of the TPMC-3X-BTP
with the corresponding connector inside the battery compartment.
The pin side of the connector should be facing upward (toward the
rear of the touch screen). Red wires should be above black wires
(toward the top of the touch screen). Ensure the connector is fully
seated.
2. Place the TPMC-3X-BTP in the battery compartment, oriented so
the wires for the multi-pin connector are on the bottom. Refer to
the photo on the following page.
3. Re-attach the battery compartment cover.
4 • Battery Pack: TPMC-3X-BTP
Installation Guide – DOC. 6796D
Crestron TPMC-3X-BTP
Battery Pack
TPMC-3X-BTP in Battery Compartment of Touch Screen
Installation Guide – DOC. 6796D
Battery Pack: TPMC-3X-BTP • 5
Battery Pack
Crestron TPMC-3X-BTP
Charging
To charge the TPMC-3X-BTP, install the TPMC-3X-BTP in a
TPMC-3X or MTX-3 touch screen and mount the touch screen in an AC
powered TPMC-3X-DS or MTX-3-DS Docking Station/Charger
(respectively) or TPMC-3X-DSW Wall Mount Docking Station (sold
separately) or mount the TPMC-3X-LP on its AC powered docking
station.
NOTE: The battery pack may take up to 2 hours to charge in a powered
touch screen if the device is in use during charging.
Storage
The TPMC-3X-BTP can be stored in a temperate, dry place (removed
from the touch screen and docking station/charger) for up to six months
without significant irreversible degradation of its performance. The
self-discharge rate is a function of temperature and internal resistance.
High temperature storage reduces charge retention. Best results occur if
the TPMC-3X-BTP is stored at an optimal temperature of 32° to 95° F
(0° to 35° C).
NOTE: The TPMC-3X BTP should be 30-50% charged when put into
storage.
Disposal
NOTE: The TPMC-3X-BTP contains a lithium polymer battery. When
the unit can no longer retain a charge, it must be recycled or disposed of
properly. Follow local ordinances and/or regulations for disposal.
Battery must be recycled. Deliver the battery to an
appropriate recycling facility.
6 • Battery Pack: TPMC-3X-BTP
Installation Guide – DOC. 6796D
Crestron TPMC-3X-BTP
Battery Pack
Resources
Reference Documents
The latest version of all documents mentioned within the guide can be
obtained from the Crestron Web site (www.crestron.com/manuals).
List of Related Reference Documents
DOCUMENT TITLE
MTX-3 Handheld Wireless Touch Screen
MTX-3-DS Desktop Docking Station/Charger
TPMC-3X Series Handheld WiFi Touch Screens
TPMC-3X-DS Desktop Docking Station/Charger
TPMC-3X-DSW Wall Mount Docking Station
Further Inquiries
To locate specific information or resolve questions after reviewing this
guide, contact Crestron's True Blue Support at 1-888-CRESTRON
[1-888-273-7876] or refer to the listing of Crestron worldwide offices on
the Crestron Web site (www.crestron.com/offices) for assistance within a
particular geographic region.
To post a question about Crestron products, log onto the Online Help
section of the Crestron Web site (www.crestron.com/onlinehelp). Firsttime users must establish a user account to fully benefit from all available
features.
Future Updates
As Crestron improves functions, adds new features and extends the
capabilities of the TPMC-3X-BTP, additional information may be made
available as manual updates. These updates are solely electronic and
serve as intermediary supplements prior to the release of a complete
technical documentation revision.
Check the Crestron Web site periodically for manual update availability
and its relevance. Updates are identified as an “Addendum” in the
Download column.
Installation Guide – DOC. 6796D
Battery Pack: TPMC-3X-BTP • 7
Battery Pack
Crestron TPMC-3X-BTP
Return and Warranty Policies
Merchandise Returns / Repair Service
1.
No merchandise may be returned for credit, exchange or service without prior authorization
from Crestron. To obtain warranty service for Crestron products, contact an authorized
Crestron dealer. Only authorized Crestron dealers may contact the factory and request an
RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of
the problem, name and phone number of contact person, RMA number and return address.
2.
Products may be returned for credit, exchange or service with a Crestron Return Merchandise
Authorization (RMA) number. Authorized returns must be shipped freight prepaid to
Crestron, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number
clearly marked on the outside of all cartons. Shipments arriving freight collect or without an
RMA number shall be subject to refusal. Crestron reserves the right in its sole and absolute
discretion to charge a 15% restocking fee plus shipping costs on any products returned with
an RMA.
3.
Return freight charges following repair of items under warranty shall be paid by Crestron,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
Crestron Limited Warranty
Crestron Electronics, Inc. warrants its products to be free from manufacturing defects in materials and
workmanship under normal use for a period of three (3) years from the date of purchase from Crestron,
with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads
and power supplies are covered for a period of one (1) year; touch screen display and overlay components
are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from Crestron or an authorized Crestron dealer.
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any.
Crestron shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall Crestron
be liable for incidental or consequential damages of any kind (property or economic damages inclusive)
arising from the sale or use of this equipment. Crestron is not liable for any claim made by a third party or
made by the purchaser for a third party.
Crestron shall, at its option, repair or replace any product found defective, without charge for parts or labor.
Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the
unexpired portion of the warranty.
Except as expressly set forth in this warranty, Crestron makes no other warranties, expressed or implied,
nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or
fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms
of this limited warranty. This warranty statement supersedes all previous warranties.
8 • Battery Pack: TPMC-3X-BTP
Installation Guide – DOC. 6796D
Crestron TPMC-3X-BTP
Battery Pack
This page is intentionally left blank.
Installation Guide – DOC. 6796D
Battery Pack: TPMC-3X-BTP • 9
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Installation Guide – DOC. 6796D
(2023856)
08.12
Specifications subject to
change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement