Quick Reference Guide (Download PDF, 2.5M)
2013 Infiniti JX
Quick Reference Guide
01
02
03
Behind
steering
wheel
04
05
21
Behind
steering
wheel
06
07
22
08
09
11
12 13 Behind
steering
wheel
10
14
15
16 17 18 19
23
24
20
25
26
01 INSTRUMENT BRIGHTNESS
CONTROL SWITCHES*
15 TILT/TELESCOPIC STEERING
WHEEL SWITCH*
02 BACKUP COLLISION INTERVENTION
(BCI) SWITCH
16 HEADLIGHT AIMING CONTROL
SWITCH*
03 TWIN TRIP ODOMETER RESET SWITCH*
17 WARNING SYSTEMS SWITCH
04 Vehicle information display
18 HEATED STEERING WHEEL SWITCH*
05 HEADLIGHT AND TURN SIGNAL SWITCH
19 POWER INVERTER SWITCH
06 LOW TIRE PRESSURE WARNING LIGHT
20 HOOD RELEASE*
07 WINDSHIELD WIPER AND
WASHER SWITCH
21 CONTROL PANEL DISPLAY SCREEN*
08 Vehicle information display
SWITCH
22 CLIMATE CONTROL SYSTEM
23 AUDIO SYSTEM
09 STEERING WHEEL SWITCHES FOR
AUDIO* / BLUETOOTH / NAVIGATION®
24 FRONT PASSENGER AIR BAG
STATUS LIGHT*
10 INTELLIGENT CRUISE CONTROL
25 POWER OUTLET
11 VEHICLE DYNAMIC CONTROL
(VDC) OFF SWITCH*
26 DRIVER’S CLIMATE CONTROLLED
SEAT SWITCH*
12 POWER LIFTGATE SWITCH
27 INFINITI DRIVE MODE SELECTOR*
13 POWER LIFTGATE MAIN SWITCH
28 PASSENGER’S CLIMATE
CONTROLLED SEAT SWITCH*
14 DISTANCE CONTROL ASSIST
(DCA) SYSTEM SWITCH*
*See your Owner’s Manual for information.
27
28
table of contents
new system features
Remote Engine Start (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INFINITI Connection™ System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . 2
Around View Monitor with Moving Object Detection (MOD)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warning Systems Switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
essential information
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator . . . . 7
Accessing the Front Cup Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Armrest/Center Console Storage Box . . . . . . . . . . . . . . . . . . . . . . . . . . 8
first drive features
INFINITI Intelligent Key™ System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Power Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2nd Row Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3rd Row Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automatic Drive Positioner (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 12
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Starting/Stopping the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Windshield Wiper/Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Automatic Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Rear Climate Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FM/AM/XM® Satellite Radio with CD/DVD Player (if so equipped) . . . . . . 18
USB/iPod® Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . 19
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . 20
Power Outlets (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Fuel-Filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
system guide
Vehicle Information Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Bluetooth® System without Navigation (if so equipped) . . . . . . . . . . . .24
Bluetooth® System with Navigation (if so equipped) . . . . . . . . . . . . . . 25
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Theater Package (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
HomeLink® Universal Transceiver (if so equipped) . . . . . . . . . . . . . . . . . . . 30
• A cellular telephone should not be used for any purpose while driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat properly secured in child
restraints or seat belts according to their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety –– Seats, seat belts and supplemental
restraint system (section 1)”, “Monitor, climate, audio, phone and voice recognition
systems (section 4)” and the “Starting and driving (section 5)” of your Owner’s Manual.
Additional information about your vehicle is also available in your Owner’s Manual,
Navigation System Owner’s Manual and at www.InfinitiUSA.com.
new s yste m fea tu res
Remote Engine Start* (if so equipped)
Your INFINITI Intelligent Key™ system allows the engine to start from
outside your vehicle. To use the remote start feature, perform the following:
1. Aim the Infiniti Intelligent Key at the vehicle. Operating range
is approximately 197 feet (60 m) from the vehicle.
2. Press the
button 01 to lock all doors.
02
01
3. Within 5 seconds press and hold the remote start
button 02
until
the
turn
signal
lights
illuminate.
If
the
vehicle
is
not
within
view, press and hold the remote start button for about 2 seconds.
The parking lights will turn on and remain on as long as the engine
is running. The doors will be locked and the climate control system
may come on.
Repeat steps 1 - 3 to extend time an additional 10 minutes. A maximum of two remote starts,
or a single start with an extension, are allowed between ignition cycles.
Depress the brake and place the ignition switch in the ON position before driving.
To cancel a remote start, perform one of the following:
• A
im the Intelligent Key at the vehicle and press and hold the
lights turn off.
• Turn the hazard warning flashers on.
• Cycle the ignition switch ON and then OFF.
button until the parking
*Laws in some communities may restrict the use of remote starters. Check local regulations before using this feature.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
INFINITI Connection™ System* (if so equipped)
Infiniti Connection provides various types of information
and services by connecting your vehicle to the Infiniti
Connection Data Center. For more details on the Infiniti
Connection service, terms and conditions, please refer
to www.Infiniticonnection.com.
Available services include:
Infiniti Personal Assistant – To access Infiniti Personal
Assistant, select “Connect to Voice Menu” from the Infiniti Connection menu or touch the
key (if available on the map screen). At the voice prompt, say “Infiniti Personal Assistant” to
be connected.
• Your Infiniti Personal Assistant can send destination information directly to your vehicle.
To access, go to the Infiniti Connection menu and select “Sync All Information Feeds”.
Then go to the feeds menu page and download the desired destination information.
Automatic Collision Notification – In case of air bag deployment, a signal is sent containing
the vehicle location and customer information and notifies the proper authorities.
*Infiniti Connection™ is only available on vehicles equipped with optional Infiniti Connection™ subscription service.
2
Emergency Call (if so equipped) – This service provides emergency assistance by connecting
subscriber to an Infiniti Connection Specialist.
• In case of an emergency, press the in-vehicle
telematics SOS button 01 .
• A Response Specialist will provide assistance based
on the situation described by the vehicle’s occupant.
Enhanced Roadside Assistance (if so equipped) –
Roadside Assistance can be accessed by touching
the Infiniti Connection key on the Info menu, the
key (if available on the map screen) or by pressing the SOS button.
01
• This service allows subscribers to receive assistance for a non-emergency incident such as
towing or a third party response.
• If warranted, Roadside Assistance may also be used in conjunction with the Emergency
Assistance service by pressing the SOS button.
My Schedule – Access your personal online Google Calendar™, hear details read via text-to speech** and select locations as a destination via the navigation system.
Report Stolen Vehicle – A Response Specialist will attempt to obtain location information
from a reported stolen vehicle and provide that information to local law enforcement agencies
to assist in the recovery of your stolen vehicle.
Remote Door Lock/Unlock – Remotely access your vehicle via Infiniti Connection Response
Specialist or designated website to remotely lock or unlock your vehicle.
Alarm Notification – This system will notify you when the factory-installed vehicle alarm
system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance notifications based
on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunction that triggers
instrument panel warning lights.
Destination Assistance – Receive point-of-interest assistance via guided IVR (Interactive
Voice Response), Response Specialist, or Infiniti Connection web portal.
Destination Send-to Vehicle – Find and download point-of interest information from
GoogleMaps™.
Connected Search – Select “Connected Search” from the Destination menu on the vehicle’s
navigation system to conduct a point-of-interest search within a certain distance of the
vehicle’s location.
Drive Zone – Monitor the movement of your vehicle within a specified region. Set up boundaries
in the Monitoring section of the Infiniti Connection web portal.
Max Speed Alert – Set up a maximum speed on the Infiniti Connection web portal. You will
receive notifications if your vehicle exceeds the max speed setting.
**Laws in some communities may restrict the use of text-to-speech. Check local regulations before using this feature.
3
new s yste m fea tu res
Mobile Information Service (if so equipped) – Receive the latest news headlines, stock
quotes and sports scores by setting up preferences on the Mobile Information Service page
in the Infiniti Connection web portal.
Valet Alert – Use Valet Alert to set up a 0.2 mile radius around your vehicle.
• A
ctivate alerts by pressing the “Connect to Voice Menu” button on the Infiniti Connection
screen or by pressing the
key on the map screen.
• At the prompt, say “Valet Alert” and then “Activate” or “Deactivate”.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
Around View Monitor with Moving Object Detection (MOD) (if so equipped)
With the ignition switch in the ON position, the Around
View Monitor is activated by pressing the CAMERA
button 01 , located on the control panel, or by moving
the shift lever to the R (REVERSE) position. The control
panel displays various views of the position of
the vehicle.
01
When the shift lever is in the P (PARK), N (NEUTRAL)
or D (DRIVE) position and the CAMERA button 01 is
pressed, the following views will display in order:
Start from any Control Panel screen
Front view & bird’s-eye view
Press
Press
Press
Front view & front-side view
Front wide view
Press
4
When the shift lever is in the R (REVERSE) position and the CAMERA button 01 is pressed,
the following views will display in order:
Rear view & bird’s-eye view
Rear view & front-side view
Press
Rear wide view
Press
Press
The colored guide lines on the display screen indicate vehicle width and approximate distances
to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
NOTE:
There are some areas where the system will not show objects.
• W
hen in the front or the rear view display, an
object below the bumper or on the ground may
not be viewed 02 .
• W
hen in the bird’s-eye view, a tall object near
the seam of the camera viewing areas 03
will not appear in the monitor.
02
The distance between objects viewed on the
AVM differs from the actual distance.
Objects in the bird’s-eye view will appear further
than the actual distance.
03
MOVING OBJECT DETECTION (MOD)
If the MOD system detects moving objects surrounding
the vehicle, a yellow frame 01 will be displayed on the
camera image and a chime sounds.
In the bird’s-eye view, a yellow frame is displayed on
those camera images (front, rear, right, left) where
moving objects are detected.
02
03
01
04
04
5
new s yste m fea tu res
When the following are displayed:
• Blue MOD icon 02 ; the system is operative in this view.
• Gray MOD icon 03 ; the system is not operative in this view.
• No MOD icon; the system is off.
To temporarily turn the system on or off, touch the 04 key.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
Warning Systems Switch (if so equipped)
The warning systems switch 01 will turn on and
off the systems enabled in the vehicle information
display. The systems controlled by the warning
systems switch include:
01
• Lane Departure Warning (LDW) system/Lane
Departure Prevention (LDP) system
02
• Blind Spot Warning (BSW) system/Blind
Spot Intervention™ (BSI) system
• Forward Collisions Warning (FCW) system
When the warning systems switch is turned off, the indicator 02 on the switch is off. If the
warning systems switch is illuminated, the system is on. The indicator will also be off if all of
the warning systems are deactivated using the settings menu.
To enable or disable these systems, perform the following operation:
• P
ress the
button 03 on the steering wheel
multiple times until you reach the Settings menu.
• P
ress up or down on the button 04 , to select
Driver Assistance 05 and Driving Aids 06
menu items.
• Press the ENTER button 04 to change a menu item.
03
04
For more information, refer to the “Starting and driving (section 5)” of
your Owner’s Manual.
05
05
06
6
ess e n t ia l i n fo r mat ion
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear
in the vehicle information display 01 when the
fuel-filler cap is not tightened correctly.
01
To tighten, turn the cap clockwise until a single click
is heard.
The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button 02 is pressed for about 1 second.
02
If the cap is not properly tightened, the Malfunction
Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)”
and the “Pre-driving checks and adjustments (section 3)” of your
Owner’s Manual.
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A Tire Pressure Low - Add Air warning message will
appear in the vehicle information display 01 and the
low tire pressure warning light 02 will illuminate when
one or more tires are low on pressure and air is needed.
•
01
T he tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mile (1.6km) at moderate speeds.
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and
audible signals to help you inflate the tires to the
recommended COLD tire pressure.
02
To use the tire inflation indicator:
1. Move the shift lever to the P (PARK) position and apply the parking brake.
2. Place the ignition switch in the ON position. Do not start the engine.
3. Add air to the under-inflated tire and within a few seconds, the hazard warning lights will start
flashing.
4. When the designated tire pressure is reached, the horn will beep once and the hazard warning
flashers will stop flashing.
5. Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at speeds above 16 MPH (25km/h). The
Tire Pressure Low - Add Air warning message and low tire pressure warning light will disappear.
When the low tire pressure warning light flashes for approximately 1 minute and then remains
on, the TPMS is not functioning properly. Have the system checked by an INFINITI retailer.
7
essent ial i n fo r ma t i o n
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside the
tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates in low ambient temperature, check
the tire pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long distance trips.
The Tire and Loading Information label contains valuable information. Please refer to section
9, “Technical and consumer information” in your Owner’s Manual for the location of the Tire
and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, the “Starting and driving (section 5)” and the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
Accessing the Front Cup Holders
To open the cup holders, push the lid 01 down and
release.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
01
Front Armrest/Center Console Storage Box
To access the top storage bin, pull up on the driver’s
side lever 01 .
To access the bottom storage bin, pull up on the
passenger’s side lever 02 .
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
8
02
01
f i rst d r i ve features
INFINITI Intelligent Key™ System
The INFINITI Intelligent Key™ system allows you to lock or unlock your
vehicle, open your liftgate and remotely start the engine.
NOTE: It is important to make sure the Intelligent Key is with you (that is,
in your pocket or purse).
02
01
REMOTE ENGINE START (if so equipped)
The remote engine start operating range is approximately 197 feet
(60 m) from the vehicle.
04
To use the remote start feature to start the engine:
06
1. Aim the Intelligent Key at the vehicle.
2. Press the
05
button 01 to lock all doors.
3. Within 5 seconds press and hold the remote start
button 02 until the turn signal lights
illuminate. If the vehicle is not within view, press and hold the remote start button for about
2 seconds.
LOCKING AND UNLOCKING THE VEHICLE
The lock and unlock operating range of the Intelligent
Key is within 31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch 03 once or press the button 01 on the keyfob.
To unlock the vehicle, perform one of the following
procedures:
03
• Push either door handle request switch 03 once; the corresponding door will unlock. Push
the door handle request switch again within 30 seconds; all other doors will unlock, or
• Press the button 04 on the keyfob to unlock the driver’s side door. Press the
again; all other doors will unlock.
button
LIFTGATE RELEASE
To open the rear liftgate, press the
button 05 for longer than 0.5 seconds.
To close the rear liftgate, press the
button 05 again for longer than 0.5 seconds.
PANIC ALARM
The Intelligent Key can also be used to activate the panic alarm by pressing and holding the
button 06 for more than 1 second. Once activated, the panic alarm and headlights will
stay on for 25 seconds.
9
f i rst dr i ve fea tu res
INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged, or
environmental conditions interfere with the Intelligent
Key operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (Park) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
Power Liftgate
When the liftgate is closed and locked, the liftgate will
open automatically by:
01
• Pushing the power liftgate switch 01 on the
instrument panel.
• Pushing the liftgate request switch 02 .
• Pressing the
button 03 on the INFINITI
Intelligent Key™ for more than 0.5 seconds.
To open the liftgate with the liftgate opener switch
04 , the liftgate must be unlocked.
The power liftgate operation can be turned on or off
by the power liftgate main switch 05 on the instrument
panel.
When the power liftgate main switch
is pushed to the OFF position, power
operation is not available using the
power liftgate switch on the liftgate
06 or the liftgate opener switch 04 .
04
02
For more information, refer to the “Pre-driving checks
and adjustments (section 3)” of your Owner’s Manual.
03
10
06
05
Front Seat Adjustments
To slide the seat forward or backward, push the control 01 forward or backward .
switch
To recline the seatback, push the switch
forward or backward.
02
01
SEAT LIFTER
To raise or lower the front portion or height of the seat, 01
push the front or back end of the switch
up
or
down.
02
03
POWER LUMBAR SUPPORT (if so equipped for driver’s seat)
To adjust the seat lumbar support, push the front or back end of the switch
03 .
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
2ND Row Seats
To slide the seat forward or backward, pull the center
of the bar 01 up and hold it while you slide the seat
forward or backward to the desired position. Release
the bar to lock the seat in position.
To recline the seatback, pull up on the seatback release
lever 02 and lean back. To bring the seatback forward,
pull the lever up and lean your body forward. Release
the lever to lock the seatback in position.
03
02
01
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
If a child safety seat is installed on the passenger’s side of the 2nd row seat, the 3rd row can be
accessed without removing the child safety seat.
To access the 3rd row from outside the vehicle, lift up on the seatback release lever 03 .
EZ ENTRY MODE
To enter the 3rd row from outside the vehicle, lift up on the seatback lever 03 . This will release
the back of the seat and fold up the seat cushion.
Slide the entire seat forward for access to the rear seat.
To return the seat to a locked position, push the upper seatback rearward until the seatback and
track are locked. Push the seat cushion down.
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)” of your Owner’s Manual.
11
f i rst dr i ve fea tu res
3RD Row Seats
To recline the seatback, pull up on the latch 01 located
on the outside corner of each seatback. Lean back until
the desired angle is obtained.
To bring the seatback forward again, pull up on the
latch 01 and move your body forward. The seatback
will move forward.
01
For more information, refer to the “Safety —— seats, seat belts and supplemental
restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner 01 memory.
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
01
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the
adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligent Key™.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the control
switch 01 right or left.
Adjust each mirror to the desired position using the
switch 02 .
To fold the outside rearview mirrors, push the switch
03 to the
position. To unfold the outside
rearview mirrors, push the switch 03 to the
position.
12
01
02
03
REVERSE TILT-DOWN FEATURE (if so equipped)
The reverse tilt-down feature will turn the selected outside mirror surface downward to provide
better rear visibility close to the vehicle.
1. Set the parking brake.
2. Push the ignition switch to the ON position.
3. Move the shift lever to the R (REVERSE) position.
4. Choose the right or left outside mirror by operating the outside mirror control switch 01 .
5. The outside mirror surfaces move downward.
The outside mirror surfaces will return to their original positions when one of the following
conditions has occurred:
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center “neutral” position.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Starting/Stopping the Engine
Depress the brake pedal.
Press the ignition switch START/STOP button to
start the engine.
NOTE: It is important to make sure the INFINITI Intelligent
Key™ is with you (that is, in your pocket or purse).
TURNING THE ENGINE OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to turn the engine off.
EMERGENCY ENGINE SHUT OFF
To shut off the engine in an emergency situation while driving, perform one of the following procedures:
Rapidly push the push button ignition switch 3 consecutive times, in less than 1.5 seconds, or
Push and hold the push button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
13
f i rst dr i ve fea tu res
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
AUTOLIGHT SYSTEM
03
01
02
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
01 or
control switch to the OFF,
position 02 .
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
04
05
FOG LIGHT SWITCH
NOTE: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
position 06
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
14
06
Windshield Wiper/Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
03
01
MIST
OFF
01 Mist (MIST) - One sweep operation of the
front wipers.
AUTO 02
02 Auto (Auto) - Operates the speed-sensing
and rain-sensing (if so equipped) front wipers
intermittently. The intermittent speed can be
adjusted by twisting the time control ring 03 .
LO
04
HI
05
04 Low (LO) - Front wipers operate at a continuous
low-speed.
05 High (HI) - Front wipers operate at a continuous
high-speed.
06 Pull the lever toward you to activate the front
washer. The front wipers will operate several
times.
06
09
RAIN-SENSING AUTO WIPER SYSTEM (if so equipped)
The rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper
speed depending on the rainfall and the vehicle speed.
To set the rain-sensing auto wiper system, push the lever down to the AUTO position 02 . The
wiper will sweep once while the ignition switch is in the ON position.
The rain sensor sensitivity level can be adjusted by turning the time control ring 03 toward the
front (high sensitivity) or toward the rear (low sensitivity).
REAR WINDSHIELD WIPER AND WASHER
07 Intermittent (INT) - Rear wiper operates
intermittently.
08 Low (ON) - Rear wiper operates at a continuous
low-speed.
09 Push the lever forward to activate the rear washer.
The rear wiper will operate several times.
07
INT
08
ON
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
15
f i rst dr i ve fea tu res
08
03
09
12
07
01
10
02
11
06
04
05
Automatic Climate Controls
01 AUTO BUTTON
The auto mode may be used year-round. Press the AUTO button to turn the system on
and the system will automatically control the inside temperature (automatic cooling and/
or dehumidified heating), air flow distribution and fan speed.
02 CLIMATE BUTTON
Press the CLIMATE button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
03 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up
cooler air.
for warmer air or down
for
04 DRIVER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the driver’s side manual air flow control button to manually control the driver’s side
air flow modes.
The following air flow indicator modes will display on the control panel display screen:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
05 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passenger’s side
temperature control buttons up for warmer air or down for cooler air.
06 DUAL BUTTON
Press the DUAL button to turn the passenger’s side temperature controls on or off. This
will allow the passenger’s side temperature to be adjusted independently from the driver’s
side by pressing the passenger’s side temperature control buttons.
07 FAN SPEED CONTROL BUTTONS
Press the left button to decrease the fan speed or press the right
the fan speed.
16
button to increase
08 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button
to turn the system on. The A/C automatically turns
on when the defroster mode is selected. This feature removes humidity from the air.
To defrost the front and side windows, set the temperature controls 03 and fan
speed controls 07 to their maximum settings.
09 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
This function automatically turns off after approximately 15 minutes.
to turn the system on or off.
10 REAR AIR CONDITIONER
To control the rear automatic air conditioning
system with the front air conditioner control
panel, press the REAR button.
When the rear automatic air conditioning system is on, the indicator light on the REAR button will
illuminate and the front display will switch to the
rear air conditioner screen. Use the driver
temperature and fan speed buttons to adjust settings.
To adjust the front air conditioning system, press the REAR button again or wait 10 seconds.
The rear control buttons will not function when REAR is shown on the front display.
11 INTAKE AIR CONTROL BUTTON
Press the intake air control
button to recirculate interior air inside the vehicle. The
indicator light on the button will illuminate. This system is used to avoid certain
outside odors and helps to adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the air conditioner is in the front
defrost mode
or front defrost and foot vent mode
.
Press the intake air control
air to the outside air. The
button again to change the air circulation from the intake
indicator light on the button will turn off.
12 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
17
f i rst dr i ve fea tu res
Rear Climate Controls
To activate the system, press the REAR button 01 on
the front control panel until REAR is not displayed on the
front display screen.
OFF button 02 – Turns the rear climate control system
off.
Fan speed control buttons 03 – Press
or decrease fan speed.
+ or
01
to increase
Temperature increase and decrease buttons 04 –
Adjusts the rear temperature up or down .
AUTO button 05 – System automatically works to keep
air flow and fan speed at a constant temperature.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
02
04
03
05
02
01
03
05
06
04
FM/AM/XM®* Satellite Radio with CD/DVD Player (if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or
left to increase or decrease the volume.
02 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
03 SEEK•CAT/TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, press the
end of the SEEK•CAT/TRACK button.
or
F or XM® satellite radio, press the
or
end of the SEEK•CAT/TRACK button to switch
to the first channel of the previous or next category.
To change tracks on a CD, press the
T o fast forward or rewind a track on a CD, press and hold the
SEEK•CAT/TRACK button.
or
end of the SEEK•CAT/TRACK button.
or
end of the
*XM® Satellite Radio is only available on vehicles equipped with optional XM® satellite subscription service.
18
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eighteen for XM
satellite radio.
To store a station in a preset, you must first select a radio band by pressing the FM•AM 05
or XM 06 button, then tune to the desired AM, FM or XM satellite radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the preset was stored then
press the corresponding station select button (1-6).
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
USB/iPod® Interface
The USB jack 01 is located in the center console under
the arm rest.
When a compatible USB memory device or iPod®
is plugged into the USB jack , compatible
audio and video files stored on the device can
be played through the vehicle’s audio system
and front display.
01
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the CRUISE
ON/OFF switch 01 . The CRUISE indicator light in
the instrument panel will illuminate.
04
03
02
01
To set cruising speed, accelerate the vehicle to the
desired speed, push the COAST/SET switch 02
and release. The SET indicator light in the instrument panel will illuminate. Take your foot off
the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02 . Release the
switch when the vehicle slows to the desired speed.
19
f i rst dr i ve fea tu res
To cancel the preset speed, push the CANCEL switch 04 .
To turn off cruise control, push the CRUISE ON/OFF switch 01 . Both the CRUISE indicator
light and the SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 01 for less than 1.5
seconds. The CRUISE indicator light 02 will illuminate.
08
07
04
Accelerate to the desired speed.
Push down on the COAST/SET switch 03 and release
it. Cruise control will be set to the desired speed.
03
01
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate 05 in set mode.
When a vehicle is detected ahead of you in the lane,
the vehicle ahead detection, set distance, and set
vehicle speed indicator lights will illuminate 06 in set mode.
02
To reset at a faster cruising speed, push and hold the ACCEL/RES
switch 07 . When the vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch
03 . Release the switch when the vehicle slows to the desired speed.
05
06
To cancel the preset speed, push the CANCEL switch 08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.
To turn off cruise control, press the CRUISE ON/OFF button 01 . The CRUISE indicator light
02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the CRUISE ON/OFF button 01 and hold it down for more than 1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control will be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
20
Power Outlets (if so equipped)
12V OUTLETS
The power outlets are for powering electrical
accessories such as cellular telephones. They are
rated at 12 volt, 120W (10A) maximum.
01
To use a power outlet, open the cap.
The power outlet on the instrument panel 01 ,
inside the center console 02 , on the back of the
center console 03 and in the cargo area 04
are powered only when the ignition switch
is in the ACC or ON position.
02
03
04
120V OUTLET (if so equipped)
The 120V outlet 05 is located on the back of the
center console.
05
To use the outlets for devices that require 120V power,
place your vehicle in the P (PARK) position with the
ignition in the ON position and push the power
inverter switch 06 .
The switch will illuminate when enabled.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
06
Fuel-Filler Door
The fuel-filler door is located on the driver’s side of the vehicle.
The fuel-filler door automatically locks/unlocks when
the driver’s door is locked/unlocked.
To open the fuel-filler door, push the right side of the
fuel-filler door and release.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
21
syste m g ui d e
Vehicle Information Display
The vehicle information display 01 displays such items as:
Vehicle settings
01
Trip computer information
Drive system warnings and settings (if so equipped)
Cruise Control System
Intelligent Cruise Control (ICC) System (if so equipped)
information
Intelligent Key operation information
Indicators and warnings
02
04
03
05
Tire pressure information
USING THE VEHICLE INFORMATION DISPLAY
The vehicle information display modes can be changed
using the
button 02 and ENTER button 03 located
on the steering wheel.
1. Press
items.
2. Press
02 to enter the vehicle information menu
04 to navigate through the items in vehicle information.
4. Press ENTER 03 to change or select an item in the vehicle information display.
5. Press
05 to go back to the previous menu.
START UP DISPLAY
When the vehicle is placed in the ON or ACC position the screens that display in the vehicle
information include:
Active system status (if so equipped)
Trip computer
Tire pressure information
Fuel economy
Warnings (if there are any)
RESETTING THE TRIP COMPUTER
1. Press the
button 02 until you reach the Trip
computer mode 03 .
2. Press the
button again for more than 1.5 seconds
to reset the trip computer.
22
03
SETTINGS
The setting mode allows you to change the information displayed in the vehicle information display:
Driver Assistance (if so equipped)
Main Menu Selection
Body Color
Maintenance
Alarms
Vehicle Settings
Language
Unit
Welcome Effects
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.
Bluetooth® Controls
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Close all windows. Surrounding noises may interfere
with system operation and performance.
Press the or button on the steering wheel to
activate voice recognition.
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of the tone.
Speak in a clear and natural voice without pausing
between words.
Look straight ahead and avoid speaking too loudly or too softly.
Microphone
To go back to the previous command, say “Go back” or “Correction”.
To cancel a voice recognition session, say “Cancel” or “Quit” or press and hold the
button for 5 seconds.
To interrupt the system voice and give a command quickly, press the
or
or
button.
When speaking Phonebook names, please be aware some phones require the last name to be
spoken before the first name. For example, “Michael Smith” may be spoken as “Smith Michael”.
*Some jurisdictions prohibit the use of cellular telephones while driving.
23
syste m g ui d e
To increase or decrease the volume of the voice prompts, push the volume control switches up
or down on the steering wheel or turn the VOL/ON•OFF control knob on the audio system
while the system is responding.
If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used to hear a list of available commands at any time.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
Bluetooth® System without Navigation (if so equipped)
CONNECTING PROCEDURE
1. Press the button on the steering wheel. The system
announces the available commands.
2. Say “Connect Phone”. The system acknowledges the
command and announces the next set of available
commands.
3. Say “Add Phone”. The system acknowledges the
command and asks you to initiate connecting from
the phone handset.
4. Initiate connecting from the phone.
• The connecting procedure varies according to each cellular phone model. For detailed
connecting instructions and a list of compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
• When prompted for a Passkey code, enter “1234” from the handset. (The Passkey code is
assigned by INFINITI and cannot be changed.)
5. The system asks for a name for the phone. Say “Yes”. The system acknowledges the command
and registers the cellular phone.
PHONEBOOK
Depending on the phone, the system may automatically download the entire phonebook. For
more information, please visit www.InfinitiUSA.com/bluetooth or the phone’s user guide.
If the phonebook does not download automatically, 40 entries can be individually downloaded.
To manually download entries:
1. Push the
button on the steering wheel.
2. After the tone, say “Phonebook”.
3. After the next tone, say “Transfer Entry”.
4. Using the phone, select an entry to send to the vehicle. Please consult the website above or
your phone’s User Guide for specific steps of the phone.
24
5. The system will speak the transferred entry. Confirm the entry by saying “Yes” after the tone.
MAKING A CALL BY PHONEBOOK ENTRY:
1. Press the
button.
2. After waiting for the tone, say “Call”.
3. After the next tone, speak a name of a phonebook entry. For example “Michael Smith”.
4. Confirm the correct name is recognized by saying “Dial” after the tone.
NOTE: In some cases, names stored using all UPPERCASE letters may not be recognized by the voice
recognition system.
MAKING A CALL BY PHONE NUMBER
1. Press the
button.
2. After waiting for the tone, say “Call”.
3. After the next tone, say “Phone Number”.
4. After the next tone, say “123-456-7890”.
You may also say the digits in groups of 3, 3 and 4, respectively. To use this group dialing
method, say only the first 3 digits of the phone number instead of all 10 digits. After the system
recognizes the digits, it will request the next 3 digits and finally the last 4 digits.
5. After the system speaks the correct number and sounds the tone, say “Dial.”
RECEIVING/ENDING A CALL
T o accept the call, press the
button.
To hang-up, press the
button on the steering wheel. To reject the call, press the
button.
Bluetooth System with Navigation (if so equipped)
CONNECTING PROCEDURE
NOTE: The vehicle must be stationary when connecting
the phone.
1. Press the SETTING button on the instrument panel
and select the “Bluetooth” key on the display.
25
syste m g ui d e
2. Select the “Connect Bluetooth” key.
3. A popup box will appear on the screen, prompting
you to confirm that the connection is for the phone
system. Select the “Yes” key.
4. Initiate connecting from the phone.
T he connecting procedure varies according
to each cellular phone model. For detailed
connecting instructions and a list of
compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned by INFINITI and cannot be changed.)
5. When connecting is complete, the screen will return to the Bluetooth settings screen.
PHONEBOOK SETUP
Depending on your cell phone, the system may automatically download your cell phone’s
entire phonebook to the vehicle’s Bluetooth system.
If the phonebook does not download automatically, the vehicle phonebook may be set for up to
40 entries.
To manually download entries:
1.Press the button and select the
“Vehicle Phonebook” key.
2. Select the “Add New” key at the top of the display.
There are different methods to input a phone
number. Select one of the following options:
• “Copy from Call History” to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “Copy from the Handset” to save a number that
has been downloaded from your handset to
the vehicle.
• “Enter Number by Keypad” to input the number
and name manually.
26
MAKING A CALL
To make a call, follow this procedure:
1. Press the button on the steering wheel. The “Phone”
menu will appear on the control panel display.
2. Select the “Vehicle Phonebook”, “Call History”,
“Handset Phonebook” or “Dial Number” key.
3. Select the desired entry from the list.
4. Dialing begins when the entry is selected or when
the “OK” key is selected.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key. To reject the call,
touch the “Reject Call” key.
To hang-up, press the
“Hang-Up” key.
button or touch the
For more information, refer to the “Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual or please visit
www.InfinitiUSA.com/bluetooth.
27
syste m g ui d e
01
02
03
04
05
06
08
07
10
09
11
Navigation System (if so equipped)
01 Touch screen display.
02 Destination (DEST) – Press to enter a destination.
03 Information (INFO) – Press to display the vehicle, traffic (if so equipped), weather (if so
equipped) or voice recognition information.
04 SETTING – Press to access the system settings.
05 Multi-Function Controller
• ENTER Button – Press the ENTER button to select the highlighted item on the screen.
• Center Dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust the
map scale.
• Slide the controller (push upward/downward/leftward/rightward) to select an item on the
screen, to adjust a setting or scroll the map in 8 directions.
06 ROUTE – Press to access guidance control functions such as guidance cancellation, route
priority or waypoint setting on the route.
07 MAP – Press to display the map. While following a programmed route, press multiple times to
28
change the type of route information.
08 STATUS – Press multiple times to display audio information, the air conditioner status, fuel
economy or navigation directions.
09 – Press to switch between the day screen (bright) and the night screen (dark). Press and
hold the button to turn the display off. Press again to turn the display on.
10 BACK – Press to return to the previous screen. In a settings screen, this button can also be
used to apply the setting. In a character input screen, this button can also delete the characters
that have been entered.
11 VOICE – Press to hear the current voice guidance for a programmed route.
For more information, please refer to your Navigation System Owner’s Manual.
Theater Package (if so equipped)
With this Entertainment System, you can play video
files via a DVD or CD providing images and sound
both from the front and rear display screens.
You can also connect auxiliary devices such as video
games, camcorders or portable video players to the
auxiliary jacks 01 located on the back of the center
console. (Your device will be controlled through its
own control panel.)
Rear Auxiliary Mode allows rear seat passengers to
independently display different sources on each
screen.
04
Use the remote controller 02 , provided with the
system, to operate the rear display screens.
Use the headphones 03 , also provided with
the system, to listen to audio wirelessly and
independently. You may also connect your own
wired-headphones to the headphone jacks 04
located on the back of the center console.
For optimum performance, select the appropriate
headphone channel 05 that corresponds to the
headrest display being viewed directly in front of you.
01
02
To view movies on the front display, stop the vehicle in
a safe location, move the shift lever to the P (PARK)
position and apply the parking brake.
To reduce driver distraction, the wireless headphones will not operate
while located in the front seats and movies will not be shown on the
front display while the vehicle is in any drive position.
03
05
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems
(section 4)” of your Owner’s Manual.
29
syste m g ui d e
Homelink®
HomeLink® Universal Transceiver (if so equipped)
The HomeLink® system can learn and consolidate the functions of up to three different hand held transmitters, operating items such as garage doors, property gates, outdoor and indoor
lights or alarm systems.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
30
me mo
memo
me mo
Printing: January 2012 (01) / QR3E 0L50U0 / Printed in USA
This Quick Reference Guide is intended to provide an overview of some of the unique features
of your new vehicle. See your Owner’s Manual, which contains important safety warnings and
information about the operation and maintenance of your vehicle, for complete details. Nissan
North America, Inc. reserves the right to make changes, at anytime, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discontinue models or equipment.
Due to continuous product development and other pre- and post-production factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with optional equipment. See
the actual vehicle for complete accuracy. Specifications, options and accessories may differ in
Hawaii, U.S. territories and other countries. For additional information on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement