null null

Illustration B-1 - v6*
SIX CHANNEL CONTROL BOARD JUMPER SETTINGS
FOR ANALOG MODEL CONSOLES
Channel Logic Jumpers
JU-1
JU-2
JU-3
JU-4
JU-200
JU-5*
JU-6*
JU-7*
JU-8*
JU-9*
JU-10*
JU-11
JU-12
JU-13
JU-14*
JU-15
JU-16
JU-17
JU-18
JU-206
JU-212
JU-213
Notes:
Install for fader start (special order fader required).
Install for remote B start and stop commands to control
the remote outputs.
Install for input B to hold and remove for input B to pulse
the remote pulse/hold outputs.
Install for remote A start and stop commands to control
the remote pulse/hold outputs.
Install to disengage cue when channel is turned on.
Install for input A to hold and remove for input A to pulse
the remote pulse/hold outputs.
Install for cue to follow the on/off mode.
Install for cue on fader detent (special order fader
required).
Install for no cue in input B (cue switch is now cough for
input B).
Install for no cue in input A (cue switch is now cough for
input A).
Input A stop lamp local/remote jumper.
Jump left and middle pins for local
console lamp control.
(Jump right and middle pins for remote
lamp control.)
Input B stop lamp local/remote jumper. Jump left and
middle pins for local
console
lamp control.
(Jump right and middle pins remote lamp control.)
Install for input A mute 2.
Install for input B mute 2.
Install for "Cue Exclusive"
(turn off mix buses when in cue mode.)
Install for timer reset with input A.
Install for input A mute 1.
Install for timer reset with input B.
Install for input B mute 1.
Jumper must be installed between lower
two pins for analog console operation.
Jumper must be installed between lower
two pins for cue buss normal operation.
Do not install - future feature use.
Items in bold are factory default jumper settings.
See following page for remote control connector pin-outs.
Consult this section for a detailed explanation of control programming and functions.
*Cue Options - Consult manual section 2.2.5 and 2.2.6 for various cue modes and
operational descriptions.
*Applies to Consoles shipped after September 06
with Millenium 6 channel control board p/n 10881 vE
15

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project