Schlage L-Series Catalogue (2013)

Schlage L-Series Catalogue (2013)

L-Series

Commercial Locks

Contents

4 L-Series Commercial Locks

6 Schlage L9000 Series

7 Schlage L400 Series

8 M Collection Decorative Lever Designs and Finishes

10 Standard Lever Designs and Finishes

12 Danmark Lever Designs and Finishes

14 Escutcheons and Roses

15 Thumbturns

16 Lock Components

17 Lock Functions - ANSI A156.13, Series 1000

18 Lock Functions - Single Cylinder Non-Deadbolt

19 Lock Functions - Single Cylinder Deadbolt

20 Lock Functions - Double Cylinder Non-Deadbolt and Deadbolt

21 Lock Functions - Full Mortise and Small Mortise Deadlocks

22 L-Series Universal Transformation Instructions

24 Electrified Lock Function

25 Cylinder Types

26 Standard (Non-IC) Cylinders

27 Full-Size Interchangeable

Core (FSIC) Cylinders

28 Small Format Interchangeable

Core (SFIC) Cylinders

29 Blocking and Compression Rings

30 Classroom Thumbturn Cylinders

31 Armored Fronts

32 Strikes

33 Door Handing

34 Specifications

34 Certifications

35 How to Order

2

Put Your Trust in the Name You Know

For more than 85 years Schlage

®

has been providing innovative security solutions for schools, hospitals, hotels, condominiums and a host of other commercial buildings. Today, Schlage is at the forefront of cutting-edge technology such as wireless security products, biometrics and CCTV.

With a wide range of products, styles and finishes, Schlage has what you need no matter how demanding your project specifications may be.

And we stand behind every lock we make with some of the best after-sales service in the business. It’s this commitment to design, performance and technology that ensures you can stand behind our products too.

3

Real Security is Knowing Exactly What You Want and Getting It

When you know exactly what you want, you don’t want to waste time finding out whether it meets your project specifications. That’s why we offer the world’s largest team of hardware specification writers to help you and your clients turn your vision into reality. And when it comes to products, our commercial suiting options, wide variety of lever designs and rich selection of finishes give you the tools you need to make your projects perfect. You know what you want. With Schlage you can be sure you’ll get it.

Safety, Security and Confidence

When you choose a Schlage lock you can be sure you’ve done the job right the first time. After all, our products are among the most durable and dependable on the market today. Our locks are easy to install, and simple to repair and maintain. That means fewer callbacks for you and total safety and security for your customers.

4

L-Series

Commercial Locks

Nothing is tougher.

At Schlage we know that every product you specify has to stand up to constant use and abuse. Your building’s locking systems face an additional challenge – keeping people and other assets safe while delivering constant, reliable performance. Schlage

L-Series Extra Heavy Duty Mortise Locks are built to withstand the rigors of daily use without fail.

We don’t compromise on security.

The safety and security of your clients’ buildings is something we take very seriously. That’s why every Schlage lock and deadbolt undergoes intensive testing to determine its ANSI grade level:

• Cycle tests

• Door impact tests

• Bolt strength tests

• Resistance tests

• Warped door tests

We pay attention to these details so you can focus on creating a functional and aesthetically pleasing environment for your clients. In fact, every one of our L-Series locks meets ANSI

Grade 1 standards for safety.

5

10

11

2

1

15

6

12

9

7

5

Vandlgard

®

The L-Series Vandlgard is ideal for areas subject to abuse or anywhere vandalism is likely to be present. Vandlgard prevents damage to internal lock components caused by excessive force from kicking, hitting or standing on the lever to gain access.

It’s easy to retrofit standard L-Series locks with Vandlgard using the Vandlgard Retrofit Kit and an instructional DVD that shows installation on existing hardware.

8

4

The Right Lock for Every Application

Schlage L9000 Series

Our L9000 Series locks are ideal for use in schools, hospitals and factories, where the finest hardware must also deliver consistent, dependable operation and stand up to constant use and abuse.

5

Strength and Durability

1. Fully wrapped heavy-gauge steel case protects against door edge attacks

2. All-metal zinc dichromate-plated working parts

3. Inside lock case protects electronic components

4. Two-piece anti-friction tongue reduces wear and tear

5. Outside and inside trim thru-bolted together and through the door

6

Security Built In

6. Break-away spindle prevents unsecured failures and provides easy spindle replacement

7. Hub blocking plate protects lock against spindle manipulation

8. Spring-loaded fusible link provides fail secure mode in case of fire

9. Inside lever applied by screwless shank mounting

– no exposed trim mount screws

Adaptable To Your Application

10. Universal lock case – ten functions in one case

11. Floating mounting tabs automatically adjust to fit a beveled door edge

12. Field-reversible handing without opening lock case

13. External spring cages allow for simple trim retrofit

14. Locking thumbturn on the inside of door visually shows when the door is locked and unlocked

15. Lever rotation in both directions (up and down) for ease of use

16. Independent lever rotation

4

1

2

Schlage L400 Series

Our L400 Series locks are designed for use as primary locks where no latching is required, such as restrooms and small doors to utility spaces. They also offer optimum security when used as auxiliary locks in other applications.

1. High-strength steel alloy cylinder retainer

2. Armored front in brass, bronze or stainless steel; adjustable for door bevel

3. 1” (25 mm) stainless steel throw deadbolt

4. Deeper retainer groove in cylinder shell increases security against wrenching and pullout; all cylinders backward compatible

5. 6-pin Everest ® cylinder with patented keys standard

6. Steel case and parts are corrosion resistant

3

7

M Collection Decorative Lever Designs

A range of options. A single standard of quality.

Introducing the M Collection, an entire lineup of decorative levers designed to maintain a custom high-style look on doors throughout any building— from the main entrance to the supply closet.

M51

Material: Forged brass and cast stainless steel

2.4”

2.125”

3.2”

4.5”

M52

Material: Forged brass and cast stainless steel

2.2”

2.125”

3”

4.5”

AVAILABLE -

APRIL 2014

2.125”

2.6”

3.2”

M53

Material: Forged brass and cast stainless steel

4.35”

M56

Material: Forged brass and cast stainless steel

2.1”

2.125”

2.4” 4.6”

3”

AVAILABLE -

APRIL 2014

2.125”

2.15”

4.5”

2.9”

M57

Material: Cast stainless steel

8

M81

Material: Forged brass and cast stainless steel

0.4”

2.125”

2.1”

4.8”

2.9”

0.4”

AVAILABLE -

APRIL 2014

2.125”

2.2”

2.9”

4.8”

M82

Material: Forged brass and cast stainless steel

M61

Material: Forged brass and cast stainless steel

2.1”

2.125”

3.2”

4.5”

M83

Material: Forged brass and cast stainless steel

0.4”

2.125”

2.9”

4.6”

All 15 of the M Collection levers can be paired with any of these commercial graded products for suiting across an office, a floor or an entire building.

Schlage L-Series Mortise

Schlage LT-Series Tubular - available April 2014

Von Duprin 98/99 Exit Devices

Von Duprin 33A/35A Exit Devices

Von Duprin 94/95 Exit Devices

The ability to suite M Collection levers across multiple platforms from

Schlage and Von Duprin means consistent style and functionality—along with unrivaled security. The M Collection was designed to function as a visual extension of any interior, from contemporary to classic. Its streamlined design is void of unsightly screws, allowing the lever to accent your door without distraction.

M54

Material: Forged brass and cast stainless steel

2.14”

2.3”

4.35”

2.125”

2.75”

AVAILABLE -

APRIL 2014

2.125”

1.9”

2.7”

4.5”

M62

Material: Cast stainless steel

AVAILABLE -

APRIL 2014

2.125”

2.14”

3”

M55

Material: Forged brass and cast stainless steel

4.3”

M63

Material: Forged brass and cast stainless steel

2.1”

2.125”

3.2”

4.5”

Finish Key

*

605

Bright Brass

606

Satin Brass

609

Antique Brass

619

Satin Nickel

625

Bright Chromium Plated

626

Satin Chromium Plated

629

Bright Stainless Steel

630

Satin Stainless Steel

643e

Aged Bronze

M84

Material: Forged brass and cast stainless steel

0.4”

2.125”

3”

5.1”

M85

Material: Forged brass and cast stainless steel

0.3”

2.125”

3.3”

4.9”

All images shown with ‘A’ rose. See page 14 for additional rose and escutcheon designs.

9

10

Standard Lever Designs

01

Material: Forged brass, bronze and cast stainless steel

2-11/16"

64mm

3-7/8"

96mm

1/2"

13mm

06

Material: Forged brass, bronze and cast stainless steel

2-3/4"

73mm

4-5/8"

117mm

02

Material: Forged brass, bronze and cast stainless steel

2-15/16"

75 mm

4-3/4"

121 mm

07

Material: Forged brass, bronze and cast stainless steel

3-5/8"

92mm

4-5/8"

117mm

18

Material: Forged brass, bronze and cast stainless steel

2-5/8"

67 mm

4-7/8"

124 mm

1/2”

Longitude

Material:

Forged brass and cast stainless steel

2-9/16”

4-7/8”

Accent (ACC)

Material:

Forged brass

2-5/8"

67 mm

4-7/8"

124 mm

Merano

Material:

Forged brass

2-5/8"

66 mm

3-1/16"

78 mm

4"

102 mm

All 16 of the Standard levers can be paired with any of these commercial graded products for suiting across an office, a floor or an entire building.

Schlage L-Series Mortise

Schlage LT-Series Tubular - available April 2014

Von Duprin 98/99 Exit Devices

Von Duprin 33A/35A Exit Devices

Von Duprin 94/95 Exit Devices

1/2"

13mm

03

Material: Forged brass, bronze and cast stainless steel

3"

76mm

4-3/4"

121mm

12

Material: Forged brass, bronze and cast stainless steel

3-5/8"

92mm

4-5/8"

117mm

ASTI (AST)

Material:

Forged brass

2-5/8"

66 mm

2-9/16"

65 mm

4"

102 mm

05

Material: Forged brass, bronze and cast stainless steel

2-7/8"

73mm

3-3/4"

95mm

1/2"

13mm

17

Material: Forged brass, bronze and cast stainless steel

3"

76mm

Latitude

Material:

Forged brass and cast stainless steel

2-9/16”

4-3/4"

121mm

Finish Key

*

605

Bright Brass

606

Satin Brass

609

Antique Brass

612

Satin Bronze

613

Oil Rubbed Bronze

619

Satin Nickel

625

Bright Chromium Plated

626

Satin Chromium Plated

629

Bright Stainless Steel

630

Satin Stainless Steel

643e

Aged Bronze

1/2"

13mm

4-3/4"

121mm

Omega (OME)

Material: Forged brass, bronze and cast stainless steel

3"

76mm

St. Annes (STA)

Material:

Forged brass

All images shown with ‘A’ rose. See page 14 for additional rose and escutcheon designs.

2-5/8"

67 mm

4-7/8"

124 mm

11

danmark Lever Designs

615

Material: Cast stainless steel

2-1/6"

52mm

4-7/16"

112mm

2-11/16"

68mm

621

Material: Cast stainless steel

2-1/8"

53mm

4-9/16"

115mm

2-7/8"

72mm

695

Material: Cast stainless steel

1-1/16"

44mm

4-5/16"

109mm

2-7/8"

72mm

12

615

Material: Cast stainless steel

2-1/6"

52mm

4-7/16"

112mm

2-11/16"

68mm

690

Material: Cast stainless steel

1-3/4"

45mm

2-13/16"

72mm

4-3/16"

107mm

Finish Key

630

Stainless Steel

660

Material: Cast stainless steel

1-13/16"

49mm

4-7/16"

113mm

2-7/8"

74mm

650

Material: Cast stainless steel

2-1/16"

52mm

4"

102mm

2-11/16"

68mm

696

Material: Cast stainless steel

2-1/16"

53mm

4-7/16"

112mm

2-3/4"

70mm

640

Material: Cast stainless steel

2-1/16"

52mm

4-1/2"

114mm

2-11/16"

68mm

13

Escutcheons and Roses

Choose from three types of escutcheon and two rose sizes to add tough, durable performance to your lockset.

Escutcheons Roses

L Full Face

Material:

Cold-forged brass, bronze or stainless steel

Finishes: 605, 606, 609, 612,

613, 619, 625, 626, 629, 630,

8"

203mm

643e

Size: 8” x 1 ¾” x

7 /

16

(203 mm x 44 mm x 11mm)

7/16"

11mm

A Wrought Rose

2 1 /

8

” (54 mm) diameter

Available for use on L-Series knob and lever designs.

Order by letter designation corresponding to the design and diameter desired.

Finishes: 605, 606, 609, 612,

613, 619, 625, 626, 629, 630,

643e

L Concealed

Material: Cold-forged brass, bronze or stainless steel

Finishes: 605, 606, 609, 612,

613, 619, 625, 626, 629, 630,

643e

Size: 8” x 1 ¾” x

7

/

16

” (203 mm x 44 mm x 11 mm)

8"

203mm

7/16"

11mm

B Wrought Rose

2

9 /

16

” (65 mm) diameter

Available for use on L-Series knob and lever designs.

Order by letter designation corresponding to the design and diameter desired.

Finishes: 605, 606, 609, 612,

613, 619, 625, 626, 629, 630,

643e

14

N Escutcheon

Material: Heavy wrought reinforced brass, bronze or stainless steel

Finishes: 605, 606, 609, 612,

613, 619, 625, 626, 629, 630,

643e

Size: 8” x 2

9 /

16

” x

7 /

16

(203 mm x 65 mm x 11 mm)

8"

203mm

7/16"

11mm

Thumbturns

Choose from three variations of thumbturn locks that help you meet the demands of specialized commercial projects.

Hotel Occupancy Indicator

09-611

For lock function L9486P, this unit can be used with A or B roses. Requires a 1

3

/

8

” (35 mm) cylinder for 1

3

/

4

(44 mm) doors. Specify finish when ordering separately.

Optional EZ Turn

L583-363

Available for rose and escutcheon trim. Disability turn (ADA) option to standard thumbturn. Can be used with thumbturn-function L-Series lock except L9463 and L463. Specify lock per L583-363 when ordering.

Coin Turn

For lock functions L9044 and

L9444 with rose trim. Specify

09-509 and finish per L283-124 when ordering.

03 Lever Shown

Products featuring a knurled surface will be indicated by adding the prefix “8” to the lever number. For example, L9050P 803A/03A.

Tactile Warning (Knurling)

Schlage L-Series commercial levers feature knurling only on the outside lever unless otherwise specified.

This feature is available on the following lever models:

01, 02, 03, 05, 06, 07, 12, 17, 18, 41, 42 and 93.

15

Lock Functions

Lock Components

Deadbolt

Stopworks functions by turn-piece

Auxiliary guarded latch

Latchbolt with anti-friction tongue

Symbol Key

Cylinder

Outside knob or lever

Inside knob or lever

Thumbturn

Thumbturn cylinder

Coin turn

Solid spindle

Two-piece spindle

Emergency turn piece

Occupancy indicator

16

Product Identification Guide

L/LV 9 4 5 3 P

Lock series

L

= standard

LV

= vandlgard

0

= dummy trim without lock case

9

= functions with lock case

0

= no deadbolt

1

= dummy trim

4

= with deadbolt

Function

Cylinder Suffix

P

= 6-pin full-face mortise cylinder with Schlage logo*

L

= less full-face cylinder

C

= concealed mortise cylinder

W

= less concealed cylinder

R

= full-size interchangeable core with Schlage logo

J

= less full-size interchangeable core

F

= full-size interchangeable core less Schlage logo

T

= full-size construction core

BD

= SFIC less core

BDC

= disposable SFIC

GD

= Everest patented SFIC

HD

= construction SFIC

SFIC

= Small Format (Best

®

style) Interchangeable Core

To order less Schlage logo, specify lock

“with K510-612 faceplate.”

LV = Vandlgard

®

function allows exterior lever to rotate freely down while remaining securely locked.

Lock Functions |

ANSI A156.13, Series 1000

Schlage ANSI

L9010 FO1

Passage Latch

Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress.

L9040

LV9040

F22

Bath/Bedroom Privacy Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn. Turning inside knob/lever or closing door unlocks outside knob/lever.

To unlock from outside remove emergency button, insert emergency thumbturn

(furnished) in access hole and rotate. Inside lever is always free for immediate egress.

L9044

LV9044

Privacy With Coin Turn Outside

Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn or outside coin turn.

Operating inside knob/lever, closing door, rotating inside thumbturn or rotating outside cointurn unlocks outside knob/lever.

Specify per L283-056 for Torx® screws.

Available with rose trim only. (Previously

XL11-868)

L9440

LV9440 F19

Privacy With Deadbolt

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn in access hole and rotate. Inside liner is always free for immediate egress.

(Previously XL11-761.)

Schlage ANSI

L9444

LV9444

Privacy with Deadbolt and

Coin Turn Outside

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn or outside coin turn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/ lever. Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever.

Specify per L283-056 for Torx screws.

Available with rose trim only. Inside lever is always free for immediate egress.

(Previously XL11-868)

L0170

Half Dummy Trim

Knob/lever on one side fixed by mounting bar.

L0172

Full Dummy Trim

Knob/lever on both sides fixed by mounting bar.

L9175

Half Dummy Trim with Lock Case

Fixed knob/lever on one side inoperable.

Includes lock case and armored front.

Options same as L9176 below.

L9176

Full Dummy Trim with Lock Case*

Fixed knob/lever on both sides. Includes lock case and blank armor front. May be ordered with optional XL11-743 armored front with cutout to receive deadbolt.

* In a double-door application where the dummy will be used as the strike order 10-091 Armored

Front Strike separately.

17

18

Lock Functions |

Single Cylinder Non-Deadbolt Functions

Schlage ANSI Schlage ANSI

L9050 F04

LV9050

Office and Inner Entry Lock

Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is closed. Inside liner is always free for immediate egress.

L9056

LV9056

L9050 with Automatic Unlocking

Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside, thumbturn or closing door. Rotating inside knob/ lever simultaneously retracts latchbolt and unlocks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9070 F05

LV9070

Classroom Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key.

Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9076 F06

LV9076

Classroom Holdback Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Depress inside knob/lever and turn key 360º for holdback feature. Inside lever is always free for immediate egress.

L9080 F07

LV9080

Storeroom Lock

Latchbolt retracted by key outside or by knob/lever inside.

Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9080EL

LV9080EL

Electrically Locked (Fail Safe)

Outside knob/lever continuously locked by 24V AC or

DC. Latchbolt retracted by key outside or by knob/lever inside. Switch or power failure allows outside knob/lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever always free for immediate exit. Inside lever is always free for immediate egress.

L9080EU

LV9080EU

Electrically Unlocked (Fail Secure)

Outside knob/lever unlocked by 24V AC or DC. Latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9080EL-RX / LV9080EL-RX

L9080EU-RX / LV9080EU-RX

Request to Exit (RX) Electrified Lock

Same as L9080EL and L9080EU functions. In addition, a micro-switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/levers rotates the retractor hub. The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress.

Specify per L283-263 with L functions, specify L283-239 with LV functions. Inside lever is always free for immediate egress.

Lock Functions |

Single Cylinder Deadbolt Functions

Schlage ANSI

L9453 F20

LV9453

Entrance Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by 20º rotation of thumbturn. Deadbolt thrown or retracted by 90º rotation of thumbturn. When locked, key outside or knob/lever inside retracts deadbolt and latchbolt simultaneously. Outside knob/lever remains locked until thumbturn is restored to vertical position.

Throwing deadbolt automatically locks outside knob/ lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9456 F13

LV9456

Corridor Lock

Latchbolt retracted by knob/lever from either side.

Deadbolt thrown or retracted by key outside or inside thumbturn. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside lever is always free for immediate egress.

Schlage ANSI

L9485

LV9485

Faculty / Hotel / Restroom Lock

Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown all keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9486 F15

LV9486

Faculty / Hotel / Restroom Lock

“Do Not Disturb” Indicator

Latchbolt retracted by key outside or by knob/ lever inside. Outside knob/lever always fixed.

Deadbolt thrown or retracted by inside thumbturn.

When deadbolt is thrown “Do Not Disturb” plate is displayed. All keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously.

Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9465

Closet/Storeroom Lock

Latchbolt retracted by knob/lever from either side.

Deadbolt thrown or retracted by key outside.

L9473 F21

Dormitory/Bedroom Lock

Latchbolt retracted by knob/lever from either side.

Deadbolt thrown or retracted by key outside or thumbturn inside.

L9480

LV9480

Storeroom Lock With Deadbolt

Latchbolt retracted by key outside or by lever or knob inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. (Previously

XL11-591)

L9485 x XL11-557

Prison Function Lock

Latch retracted by key outside or knob inside.

Outside knob always free spinning. Deadbolt only thrown or retracted by guard’s key.

Inside knob becomes fixed when deadbolt is thrown. Prisoner’s key only retracts latchbolt.

Furnished standard with tamper-resistant Torx screws. Specify per XL11-557.

L9486 x L583-375

LV9486 x L583-375

L9486 with “Occupied” Indicator

Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown “Occupied” plate is displayed and all keys become inoperative except emergency keys. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. (Previously

XL11-580)

L9496

Privacy with “Occupied” Indicator

Knob/lever retracts latchbolt from either side.

Deadbolt thrown or retracted by key outside

(retraction by key required in the event of an emergency) or inside thumbturn. Throwing deadbolt locks outside knob/lever and displays “Occupied” plate. Rotating inside knob/lever simultaneously retracts both deadbolt and latchbolt, and unlocks outside knob/lever. Inside lever is always free for immediate egress. (Previously XL11-885)

* In a double-door application where the dummy will be used as the strike order 10-

091 Armored Front Strike separately.

19

20

Lock Functions |

Double Cylinder Non-Deadbolt Functions

Schlage ANSI

L9060 F09

LV9060

Apartment Entrance Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key from inside.

When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress.

L9071

LV9071

Classroom Security Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Inside lever is always free for immediate egress.

L9077

LV9077

Classroom Security Holdback Lock

Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked.

Depress inside knob/lever and turn key 360º for holdback feature. Inside lever is always free for immediate egress.

L9082 F30

LV9082

Institution Lock

Latchbolt retracted by key from either side.

Knob/lever on both sides always inoperative.

Auxiliary latch deadlocks latchbolt when door is closed.

L9082EL

L9082EU

L9082 Electrically Locked or Electrically

Unlocked Both Sides*

EL: Outside and inside knob or lever continually locked electrically. Latchbolt retracted by key either side. Switch or power failure allows outside and inside knob/lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. EU: Outside and inside knob/lever unlocked electrically.

Latchbolt retracted by key either side. Switch or power failure keeps inside and outside knob/lever locked. Auxiliary latch deadlocks latchbolt when door is closed. (Previously

XL11-452)

Lock Functions |

Double Cylinder Deadbolt Functions

Schlage ANSI

L9457

LV9457

Classroom Security Lock with Deadbolt

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Inside lever is always free for immediate egress.

L9466 F14

Store/Utility Room Lock with Deadbolt*

Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side.

L9482 x XL11-943

LV9482 x XL11-943

Institution Lock with Deadbolt*

Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Deadbolt thrown or retracted by key either side. Auxiliary latch deadlocks latchbolt when door is closed. Specify per XL11-543.

In a double-door application where the dummy will be used as the strike order 10-091 Armored Front Strike separately.

*Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended.

Installation should be in accordance with existing codes only.

Lock Functions |

Full Mortise Deadlocks

Schlage ANSI

L9460 F17

Cylinder x Thumbturn Lock

Deadbolt thrown or retracted by key outside or thumbturn inside.

L9462 F16

Double Cylinder Lock*

Deadbolt operated by key from either side.

L9463

Classroom Lock

Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt, but cannot project it.

L9464 F18

Cylinder Lock

Deadbolt thrown or retracted by key from one side. No trim on opposite side.

L9460 x XL11-635

L9460 with Pull

Knob/lever both sides fixed. Deadbolt thrown or retracted by key outside or thumbturn inside.

L9460 x XL11-886

Single Cylinder Deadlock with Pull

Deadbolt thrown or retracted by key outside or thumbturn inside. No latch, but inside knob or lever is springloaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever.

L9462 x XL11-886

Double Cylinder Deadlock with Pull*

Deadbolt thrown or retracted by key from either side. No latch, but inside knob/lever is spring-loaded. Rotating inside knob/lever also retracts deadbolt.

Fixed outside knob/lever.

L9464 x XL11-886

Deadlock with Pull

Deadbolt thrown or retracted by key from one side. No latch, but inside knob/lever is spring-loaded. Rotating inside knob/lever also retracts deadbolt.

Fixed outside knob/lever.

Lock Functions |

Small Mortise Deadlocks

Schlage ANSI

L460 E06071

Cylinder x Thumbturn Lock

Deadbolt thrown or retracted by key outside or thumbturn inside.

L462 E06061

Double Cylinder Lock*

Deadbolt operated by key from either side.

L463 E06091

Classroom Lock

Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt, but cannot project it.

L464 E06081

Cylinder Lock

Deadbolt thrown or retracted by key from one side. No trim on opposite side.

L480

Door Bolt

Deadbolt thrown or retracted by thumbturn from one side. No trim on opposite site.

L496

Deadbolt with “Occupied” Indicator

Deadbolt thrown or retracted by key outside or thumbturn inside. When deadbolt is thrown “Occupied” plate is displayed. (Previously XL11-911)

21

Schlage L-Series Universal Transformation Instructions

The L9050 universal case can be transformed into nine different functions* with just a few additional parts.

For some functions, additional parts are not necessary.

ANSI

Function

Function Type

F04 L9050 (w/thumbturn) Office

Function Description

Latchbolt operated by lever either side except when outside lever is made inoperative by a stop or other mechanical means other than key. When outside lever is locked, latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch.

F01 L9010 Passage

F05

F07

F09

L9070 Classroom

L9080 Storeroom

L9060 Apartment Entrance

Latchbolt operated by lever from either side at all times.

Latchbolt operated by lever either side except when outside lever is locked from outside by key or push button mechanism. When outside is locked latchbolt is retracted by key or by operating key or push button, and outside lever from outside or by operating inside lever. Auxiliary deadlatch.

Latchbolt operated by key outside or by operating inside lever. Outside lever always inoperative. Auxiliary deadlatch.

Latchbolt operated by lever either side, except when made inoperative by key from inside. When outside is locked latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch.

F31

L9080 (less outside cylinder)

Exit or Communicating

F32 L9071 Classroom Security

Latchbolt operated by inside lever. Non-removable blank trim or no trim outside.

Latchbolt retracted by lever either side except when outside lever is locked by key from inside or outside. When outside lever is locked latchbolt is retracted by key either side or by inside lever. Auxiliary deadlatch.

L9080 (less outside lever) Service

Latchbolt operated by key outside or by operating inside lever. No outside lever. Auxiliary deadlatch.

L9080 (less inside trim) Utility

Latchbolt retracted by key outside; outside lever always inoperative. No inside trim. Auxiliary deadlatch.

L9070 (less inside trim) Closet

Latchbolt operated by lever on outside except when outside lever is locked from outside by key. When outside is locked latchbolt is retracted by key or by operating key from outside lever. Auxiliary deadlatch.

* Assumes Everest cylinders and L9050 as base function (L283-133 Chassis/L9050LB Distributor Lock Case) — only applies to sectional trim (not escutcheon).

22

Transformation Instructions

Install cloverleaf cam cylinder on outside; install thumbturn assembly

09-509-027 on inside.

Do not install thumbturn unit 09-509-027 on inside or cylinder outside.

Install chassis in the unlocked position.

Additional Part(s)

No additional parts required.

No additional parts required.

Install cloverleaf cam cylinder on outside; do not install thumbturn assembly 09-509-027 on inside.

Do not install thumbturn 09-509-027 on inside. Install chassis in the locked position. Replace cloverleaf cam L583-153 with straight cam

B502-948 (Everest), L583-255 with K510-680 (IC and SFIC) and install on outside.

Do not install thumbturn 09-509-027 on inside. Install cloverleaf cam cylinder on inside. Replace clover leaf cam L583-153 with straight cam

B502-948 (Everest), L583-255 with K510-680 (IC and SFIC) and install on outside.

Do not install thumbturn unit 09-509-027 on inside. Install chassis in the locked position. Install inside lever with L285-150 mounting plate; do not install outside lever or cylinder.

Do not install thumbturn unit 09-509-027 on inside. Install cloverleaf cam cylinder on inside and outside.

Do not install thumbturn unit 09-509-027 on inside. Install chassis in the locked position. Replace cloverleaf cam L583-153 with straight cam

B502-948 (Everest), L583-255 with K510-680 (IC and SFIC) and install on outside. Install inside lever with L285-150 mounting plate; do not install outside lever.

Do not install thumbturn unit 09-509-027 on inside. Install chassis in the locked position. Replace cloverleaf cam L583-153 with straight cam

B502-948 (Everest), L 583-255 with K510-680 (IC and SFIC) and install on outside. Install inside lever on outside with L283-150 mounting plate; do not install inside lever.

Install cloverleaf cam cylinder on outside; do not install thumbturn assembly 09-509-027 on inside. Install inside trim on outside with

L283-150 mounting plate.

Cams B502-948 (Everest),

K510-680 (IC and SFIC) or L583-476 or L583-477 for modular cylinders

No additional parts required.

Mounting plate L283-150

Mortise cylinder assembly and cam L583-153

Cams B502-948 (Everest),

K510-680 (IC and SFIC), mounting plate L283-150 or L583-476 or L583-477 for modular cylinders

Cams B502-948 (Everest),

K510-680 (IC and SFIC), mounting plate L283-150 or L583-476 or L583-477 for modular cylinders

Mounting plate L283-150

Schlage L-Series Universal Transformation Instructions

The L9050 universal case can be transformed into nine different functions* with just a few additional parts.

For some functions, additional parts are not necessary.

ANSI

Function

Function Type

F04 L9050 (w/thumbturn) Office

Function Description

Latchbolt operated by lever either side except when outside lever is made inoperative by a stop or other mechanical means other than key. When outside lever is locked, latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch.

F01 L9010 Passage

F05

F07

F09

L9070 Classroom

L9080 Storeroom

L9060 Apartment Entrance

Latchbolt operated by lever from either side at all times.

Latchbolt operated by lever either side except when outside lever is locked from outside by key or push button mechanism. When outside is locked latchbolt is retracted by key or by operating key or push button, and outside lever from outside or by operating inside lever. Auxiliary deadlatch.

Latchbolt operated by key outside or by operating inside lever. Outside lever always inoperative. Auxiliary deadlatch.

Latchbolt operated by lever either side, except when made inoperative by key from inside. When outside is locked latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch.

F31

L9080 (less outside cylinder)

Exit or Communicating

F32 L9071 Classroom Security

Latchbolt operated by inside lever. Non-removable blank trim or no trim outside.

Latchbolt retracted by lever either side except when outside lever is locked by key from inside or outside. When outside lever is locked latchbolt is retracted by key either side or by inside lever. Auxiliary deadlatch.

L9080 (less outside lever) Service

Latchbolt operated by key outside or by operating inside lever. No outside lever. Auxiliary deadlatch.

L9080 (less inside trim) Utility

Latchbolt retracted by key outside; outside lever always inoperative. No inside trim. Auxiliary deadlatch.

L9070 (less inside trim) Closet

Latchbolt operated by lever on outside except when outside lever is locked from outside by key. When outside is locked latchbolt is retracted by key or by operating key from outside lever. Auxiliary deadlatch.

* Assumes Everest cylinders and L9050 as base function (L283-133 Chassis/L9050LB Distributor Lock Case) — only applies to sectional trim (not escutcheon).

Transformation Instructions

Install cloverleaf cam cylinder on outside; install thumbturn assembly

09-509-027 on inside.

Do not install thumbturn unit 09-509-027 on inside or cylinder outside.

Install chassis in the unlocked position.

Additional Part(s)

No additional parts required.

No additional parts required.

Install cloverleaf cam cylinder on outside; do not install thumbturn assembly 09-509-027 on inside.

Do not install thumbturn 09-509-027 on inside. Install chassis in the locked position. Replace cloverleaf cam L583-153 with straight cam

B502-948 (Everest), L583-255 with K510-680 (IC and SFIC) and install on outside.

Do not install thumbturn 09-509-027 on inside. Install cloverleaf cam cylinder on inside. Replace clover leaf cam L583-153 with straight cam

B502-948 (Everest), L583-255 with K510-680 (IC and SFIC) and install on outside.

Do not install thumbturn unit 09-509-027 on inside. Install chassis in the locked position. Install inside lever with L285-150 mounting plate; do not install outside lever or cylinder.

Do not install thumbturn unit 09-509-027 on inside. Install cloverleaf cam cylinder on inside and outside.

Do not install thumbturn unit 09-509-027 on inside. Install chassis in the locked position. Replace cloverleaf cam L583-153 with straight cam

B502-948 (Everest), L583-255 with K510-680 (IC and SFIC) and install on outside. Install inside lever with L285-150 mounting plate; do not install outside lever.

Do not install thumbturn unit 09-509-027 on inside. Install chassis in the locked position. Replace cloverleaf cam L583-153 with straight cam

B502-948 (Everest), L 583-255 with K510-680 (IC and SFIC) and install on outside. Install inside lever on outside with L283-150 mounting plate; do not install inside lever.

Install cloverleaf cam cylinder on outside; do not install thumbturn assembly 09-509-027 on inside. Install inside trim on outside with

L283-150 mounting plate.

No additional parts required.

L583-476

Cams B502-948 (Everest),

K510-680 (IC and SFIC) or L583-476 or L583-477 for modular cylinders

Mortise cylinder assembly and cams B502-948 (Everest),

K510-680 (IC and SFIC) or

L583-476 or L583-477 for modular cylinders

B502-948

B502-948

Schlage L9060 Outside and Other Straight Cam Applications

L583-477

K510-680

L583-476

Schlage L9060 Outside and Other Straight Cam Applications

L583-477

1

1

/ " / 1

3

/ ” / 1

5

/

8

Y = .72

” 1

1

/

4

" / 1

1

/

2

” / 1

3

/

4

Dim. X = .35

Y = .72

K510-680

L583-476

1

1

/ " / 1

3

/ ” / 1

5

/

8

Dim. X = .35

Y = .72

L583-477

1

1

/

4

" / 1

1

/

2

” / 1

3

/

4

Dim. X = .35

Y = .72

Mounting plate L283-150

L583-274

L283-150

¹⁄₈

, 1

³⁄₈

, 1

⁵⁄₈

"

L583-275

For housing sizes: 1 ¹⁄₄ , 1 ¹⁄₂ , 1 ³⁄₄

"

Mortise cylinder assembly and cam L583-153

Mortise Cylinder

Assembly

Compr. Ring & Spring

L583-153

1

1

/

L583-476

8

L583-274

" / 1

3

/

8

” / 1

5

/ ”

L583-275

1

1

/

4

" / 1

1

/ ” / 1

3

/

4

Cams B502-948 (Everest),

K510-680 (IC and SFIC), mounting plate L283-150 or L583-476 or L583-477 for modular cylinders

Cams B502-948 (Everest),

K510-680 (IC and SFIC), mounting plate L283-150 or L583-476 or L583-477 for modular cylinders

L283-150 B502-948 K510-680

1

1

/

8

" / 1

3

/ ” / 1

Y = .72

5

/ ” 1

1

/

L583-477

" / 1

1

/ ” / 1

3

/

4

Y = .72

L283-150 B502-948 K510-680

L583-476

1

1

/ " / 1

3

/ ” / 1

Dim. X = .35

Y = .72

5

/

8

L583-477

1

1

/

4

" / 1

1

/

2

” / 1

Dim. X = .35

Y = .72

3

/

4

Mounting plate L283-150

L283-150

23

Electrified Lock Function

Applications:

Security control centers, cashier rooms, fire safety exits, stairwell doors, telephone equipment rooms, computer rooms, hospital equipment and narcotics storage areas.

Regulating Devices:

Recognition Systems, Inc.,

HandReaders, wall switches, security consoles, access card

L9080PEL

L9080PEU

L9082PEL

L9082PEU

readers, thermo-sensitive devices, smoke and fire alarms, telephone access controls, automatic time devices and computerized controls.

All installations should be in accordance with local electrical codes and National Electrical Code, NFPA 70.

Electrical Requirements for EL or EU

Voltage: 24V AC or 24V DC (maximum 26V, minimum 22V)

Peak Current: Amps 1.3 at 5- to 10-second intervals

Holding Current: Amps .135 between peak current intervals

Operating Temperature: Maximum +151º F, minimum -31º F

Micro Switch Electrical Requirements for Request to Exit

(RX) Function

Amps: 1.0

Volts: 24 AC or DC

Peak Load: Amps, 5; volts, 250 AC or DC

Replacement Kit

L283-053 – Solenoid and driver, EL or EU

Typical Wiring Diagram for Electrified L-Series Locks

Frame to Door

Connector

(Not Furnished)

Varistor would go here if used

(Not Furnished)

Switch

(Not Furnished)

24V AC 115V AC

Typical Installation

• Electrified L-Series locks contain a transistorized circuit that provides full voltage to the solenoid upon initial application of electrical power and at 5- to 10-second intervals.

• Each lock should preferably have its own 24-volt transformer. Two or more locks may be operated in parallel from a single transformer, provided it has the necessary current rating.

NOTE: DO NOT connect locks in series from a higher voltage rated transformer.

• We DO NOT recommend that these locks be connected to a supply circuit that also contains electromagnetic devices. If an electromagnetic device is connected to the supply circuit, the resulting transient voltages could damage the lock. The transient voltage must be carefully suppressed at the equipment producing them before connecting the lock to the same circuit.

• A varistor rated at 35 volts (peak recurrent) may be used for transient voltage protection.

24

Cylinder Types

Standard Cylinders

Schlage locks are provided with cylinders precision-built to extremely close tolerances and the highest standards of accuracy.

Using only solid brass bar stock plugs and shells, phosphor bronze springs, and nickel silver keys and bottom pins ensures long life and ease of operation. Our 6-pin Everest cylinders in C123 keyway with two patented keys are standard for stock. C145 is standard for new master key systems.

Primus

®

High Security Cylinders

Primus high-security cylinders are available to add patented key control and varying degrees of geographical exclusivity to most

Schlage 6-pin key systems, whether Everest or Classic keyways.

In addition to a conventional pin tumbler mechanism, Primus cylinders incorporate a patented finger pin and sidebar design, providing a “dual-locking” cylinder that is virtually pick-proof.

Resistance to drilling and other physical attack is optional by specifying 20-500 Series UL437 Listed cylinders.

Primus Lockout Cylinders

For doors where it is frequently desirable to disable all keys from operating the lock temporarily use lockout cylinders. The special lockout key can be removed while the plug is turned to the 11 o’clock position, preventing all normal operating keys, including master keys, from fully entering the cylinder.

Suggested applications for lockout cylinders include laboratories, dark rooms, clean rooms and exterior doors to dormitories.

Schlage will not master key lockout cylinders.

25

26

Cylinder Only

Standard (Non-IC) Cylinders

Standard (Non-IC) Mortise Cylinders

Design Function

Conventional Primus

Cylinder Mechanism

Primus UL437

20-593

Primus

Lockout

20-717**

L Escutcheon with concealed shell cylinder

(C suffix)

All Except Below

L & N

Escutcheons

(cylinders and spring only)

L9060P Outside

L9485, L9486

Hotel Functions

All Except Below

L9080P Outside

L9485, L9486

Hotel Functions

Sectional Trim and L400-Series

(cylinder with compression ring

& spring)

All Except Below

L9060P Outside

L9060P Outside

30-021

26-021

30-022*

30-004

26-023

30-005*

30-001

20-001

30-002*

* Specify door hand for hotel function cylinders.

** Discard compression ring for Lockout cylinders with escutcheon trim.

20-793

20-701

N/A

20-789

N/A

N/A

20-787

20-700

N/A

20-501

N/A

20-589

N/A

N/A

20-587

20-500

N/A

20-501

N/A

N/A

N/A

N/A

20-717

20-715

N/A

Compr. Ring & Spring

Primus UL437

Lockout

20-517**

20-515**

N/A

N/A

N/A

N/A

20-517

20-515

N/A

Finishes: 605, 606, 611, 612, 613, 619, 625, 626, 629 and 630.

Concealed shell cylinders available in 606 and 626 only.

6-pin Everest C123 keyway standard for stock cylinders; C145 standard for new key systems.

Standard cylinder lengths: sectionals (rose) trim = 1 1 /

8

” (29 mm), escutcheon trim = 1 1 /

4

” (32 mm).

Optional cylinder lengths are in

1

/

8

” (4 mm) increments ranging from 1

1

/

8

” to 1

3

/

4

” (29 mm to 44 mm).

Cylinder Only Cylinder with

Full-Size Interchangeable Core Cylinders

Cylinder with

Blocking Ring

Schlage figure-8 interchangeable core (IC) cylinders allow immediate rekeying at the door. Simply use the special control key to replace the core in seconds. Full-size IC cylinders can be integrated into any existing 5- or 6-pin Schlage key system with no adverse effects on keying capacity. Convert existing mortise locks to interchangeable core merely by replacing the old cylinder with the IC cylinder and proper collar(s).

For ordering information see page 35.

Full-Size IC Mortise Cylinders

Design Function

Core Mechanism

Primus Conventional Primus UL437

All Except Below 30-008 20-798 30-007

L & N

Escutcheons

(cylinders with compression ring)

L9060P Outside

L9485P, L9486P

Hotel Functions

30-030

30-010*

20-782

N/A

30-032 + 36-083

30-007

Sectional Trim and L400-Series

(cylinder with compression ring, spring and

3 /

8 blocking ring)

All Except Below

L9060P Outside

30-138

20-061

20-776

20-783

30-137

30-032 + 36-083 +

35-082-037

L9485P, L9486P

Hotel Functions

30-140* N/A N/A

* Hotel function cores are handed. Specify hand of door. Finishes: 605, 606, 611, 612, 613, 619, 625, and 626. Standard cylinder length is 1 1 /

2

”.

Full Size Interchangeable Cores Only

Number Description

23-030 Conventional core

20-740

Primus high-security core

30-120 Hotel function core (Specify hand of door)

Available 606 and 626 finish only.

Standard keyway: 6-pin Everest C123 for stock, C145 for new master key systems

27

28

Cylinder Only Cylinder with

Compression

Ring & Spring

Cylinder with

Blocking Ring

Small Format Interchangeable Core (SFIC) Cylinders

The L-Series lockset can be ordered to accept small format interchangeable cores (SFIC) compatible with manufacturers such as Falcon, Arrow and Best; cams are easily changeable.

To order Schlage L-Series mortise locks with SFIC cylinders less core, change suffix P to BD. Example: L9453BD. To order locks with Everest B Family restricted keyway cores, change suffix to GD. To order with keyed construction cores, change suffix to HD. To order with disposable construction cores, change suffix to BDC.

For ordering information see page 35.

Standard (Non-IC) Mortise Cylinders

Design Function

Everest

Restricted

(GD Suffix)

Core Mechanism

Keyed

Construction

(HD Suffix)

Disposable

Construction

(BDC Suffix)

Housing

Less Core

(BD Suffix)

L & N

Escutcheons

(cylinders with compression ring and spring)

All* except

L9060 Outside

L9060 Outside

Sectional Trim and L400-Series

(cylinder with compression ring, spring and 1 /

4

” blocking ring)

All* except

L9060 Outside

L9060 Outside

Finishes: 605, 606, 611, 612, 613, 619, 625, and 626.

Standard cylinder length is 1 3 /

8

”.

80-308

30-030

30-138

80-304 +

36-082-025

80-138

20-782

20-776

80-134

36-082-025

80-115

30-032 + 36-083

30-137

80-112

36-082-025

80-108

80-104

80-101

80-104

36-082-025

Small Format Interchangeable Core Only

Number Description

80-036

80-037

80-043

80-033

7-Pin uncombinated Everest B Family restricted keyways

7-Pin combinated Everest B Family restricted keyways

6-Pin uncombinated Falcon / Best keyways

7-Pin uncombinated Falcon / Best keyways

Available 606 and 626 finish only. Specify keyway for existing systems.

80-033 and 80-043 cores are available in A, D, E, F, G, H, J, K, L, and M keyways.

Schlage assigns the keyway when establishing new Everest restricted key systems.

Blocking and Compression Rings

36-079

Blocking Ring. Specify finish and dimension. Not to be used with 36-083.

36-082

Blocking Ring. Specify finish and dimension.

Use with 36-083.

36-083

1 1 /

2

” diameter

Compression Ring and

Spring. Specify finish and dimension.

L538-195

Compression Spring.

Full-Size Core Blocking Ring Requirements

Function Trim

L9050, L9070, L9080, L9410 (disc), L9453, L9456,L9460 per XL11-886 or XL11-635, L9464 per XL11-886, L9465, L9473, L9480, L9496

L9485

L9486

L9060, L9071, L9077, L9082, L9457, L9462 per XL11-886, L9466, L9482

L460, L464, L496, L9460, L9464

L462, L463, L9462, L9463

Rose

Escutcheon

Rose

Escutcheon

Rose

Escutcheon

Rose

Escutcheon

Rose Trim

Rose Trim

012

025

025

050

025

050

1

3

/

8

012

N/R

012

050

Door Thickness

1

3

/

4

” 2”

Dimension

037 025

012

037

N/R

025

N/R

N/R

N/R

043

012

037

050

N/R

025

043

2

1

/

4

N/R

N/R

031

N/R

025

N/R

025

N/R

025

031

Dimensions for Blocking Rings

Blocking

Ring Length

1 /

8

3 /

16

1 /

4

5 /

16

3 /

8

7 /

16

1 /

2

Dimension

037

043

050

012

018

025

031

Full-Size Core Blocking Ring Requirements

Function

L9050, L9060, L9070, L9071, L9077, L9080, L9082, L9453, L9456,

L9457, L9462 per XL11-886, L9465, L9466, L9473, L9482

L9050, L9060, L9070, L9080, L9082, L9410 (disc), L9453,

L9456,L9460 per XL11-886 or XL11-635, L9464 per XL11-886, L9465,

L9466, L9473, L9480, L9496

L460, L464, L496, L9460, L9464

L462, L463, L9462, L9463

Trim

Rose

Escutcheon

Rose

Escutcheon

Rose Trim

Rose Trim

018

037

037

N/R

1 3 /

8

Door Thickness

1 3 /

4

” 2”

Dimension

025 012

N/R

050

N/R

037

N/R

025

050

N/R

012

037

2 1 /

4

N/R

N/R

025

N/R

N/R

025

29

Classroom Thumbturn Cylinders

These cylinders are for L463 and L9463 classroom function deadlocks. They are handed. They have a rotational stop in one direction to prevent locking from the inside, but allow unlocking. Cylinders are field-reversible by changing the position of the rotational stop. All cylinders furnished with L583-254 cam.

Number Collar(s)

09-900

09-904

None

Compression ring and spring

09-905

09-907

1

For 1 3 /

4

” doors: compression ring, spring and

/

8

” blocking ring

1

For 1 3 /

4

” doors: compression ring, spring and

/

8

” blocking ring

Specify hand of door and finish. 1

09-905 also available in

1

1

/

8

” length standard. 09-900 and

/

8

” increments up to 1

3

/

4

”.

Mortise Cylinder Cams

Most Functions

L400 and L9000 Series

L9060 Outside Only

L583-153

Everest and

Primus

L583-254

Classic

Conventional

L583-255

All IC

B502-948

Everest and

Primus

B502-191

Classic

Conventional

K510-680

All IC

Cams Screws

B502-942

B502-468

L583-333

B520-484

Everest and Primus (non-IC)

Classic Conventional (non-IC)

All full-size interchangeable core

All small format interchangeable core

IC Installation Tool

This tool is used to install and remove mortise cylinder housings and test mortise cylinder cam action for both small format and full-size interchangeable core cylinders. Its other ends are designed to install the driver and retainer for full-size

IC in Schlage key-in-knob/lever locksets.

M504-413

(Order as needed)

30

Armored Fronts

L-Series armored fronts are produced from brass, bronze or stainless steel material, finished to match lock trim and furnished complete with screws. Numbers for ordering separately or with locks are listed below. Armored fronts are specified in latch column of order form.

Standard Square

Corner

1 1 /

4

” (32 mm) width

Square Corner

1 1 /

4

(32mm)

Width

1 1 /

16

(27mm)

Width

09-662 09-668

09-663 09-669

Description

Latch: L9010, 9040, 9044

Deadlatch: L9050, 9056, 9060, 9070, 9071, 9080, 908

09-664

09-665

09-670

09-671

Latch x deadbolt: L9444, 9456, 9457, 9465, 9466, 9473, 9496

Deadbolt: L9460, 9462, 9463, 946

Deadlatch x deadbolt: L9453, 9480, 9485, 948

09-666 09-662

09-661

09-713

09-667

----

Blank (no holes): L9175, L917

Deadlatch, non-UL: L9076, 9077 (holdback functions)

09-717 ---Deadbolt: L400-Series

Note:

For 1 3 /

8

”” (35mm) doors, 1 1 /

16

” (27mm) front should be specified.

31

Strikes

All L-Series strikes are produced from brass, bronze or stainless steel material, finished to match lock trim, and furnished complete with screws. Numbers for ordering separately or with locks are listed below.

32

Standard for L9000

10-072

1

1

/

4

” x 4

7

/

8

” x 1 3 /

16

” Lip

32 mm x 124 mm x 30 mm

Armored Front Strike

10-091

1

3

/

4

” x 8” x 1

3

/

16

” Lip

32 mm x 203 mm x 30 mm

Wood Frame

Reinforcer

37-015

Standard for L400

1

1

10-079

/

8

” x 3

1

/

2

32 mm x 89 mm

Number Lip Length

10-072

1 3 /

16

” (30mm)

7 /

8

” (22mm), 1” (25mm),

1 1 /

2

” (38mm)

10-073

10-075

10-078

10-079

10-091*

1 3 /

4

” (44mm), 2” (51mm)

No Lip

No Lip

No Lip

No Lip

1 3 /

16

” (30mm)

K510-053

K10-066

---

---

*Specify hand of inactive leaf.

Description

L9000 Standard

L9000 Optional

L9000 Special lip

L9460-Series deadlocks

1 /

2

” (13mm) Rabbeted (use with 1 1 /

16

” (27mm) armor)

1 1 /

4

” x 4 7 /

8

” with box, L400 optional

1 1 /

8

” x 3 1 /

2

” with box, L400 standard

Armored front strike, no box

Strike box for 10-079

Strike box, all except 10-079

Optional for L400

10-078

1

1

/

4

” x 4

7

/

8

32 mm x 124 mm

Door Handing

One of the revolutionary features of the L-Series mortise lock is that handing can be done by the distributor or installer quickly and easily without opening the lock case. This feature allows a Schlage distributor to order L-Series locks as stock and customize the handing to each order’s specification. This means off-the-shelf delivery to meet today’s fast-track construction requirements. These mix-and-match lever-with-knob combinations, along with a quickly reversible lock chassis, provide the ultimate in stocking, ordering and installation flexibility. Orders can be filled from stock, minimizing delivery problems.

Changing Lock Hand

No more than two simple steps are required to change the hand of any L-Series lock. Rotate the latch unit 180° and/or change the catch screw position.

Pull and rotate

Relocate catch screw

A. Changing Latchbolt Handing

Remove armored front. Pull latchbolt away from chassis and rotate complete unit 180° to reverse the door handing. Reinstall armored front.

LH Left Hand

LR Left Hand

Reverse Bevel

B. Change Chassis Handing

Remove catch screw from one side of chassis and install on opposite side. For RH and RR, the catch screw will be on the lock case side. For LH and LR, the catch screw will be on the lock case cover.

* Catch screw location reversed for

Vandlgard function. For first time users, an instructional video is available.

RH Right Hand

RR Right Hand

Reverse Bevel

The hand is determined by the direction the door swings when viewed from the exterior or corridor side of the door.

33

Specifications

Handing:

L9000-Series lock bodies are field-reversible without disassembly.

L400-Series locks are non-handed.

Door Thickness:

1 3 /

4

” (44 mm) standard. 1 3 /

8

” (35 mm) to 2 1 /

2

” (64 mm) optional. Over

2 1 /

2

” (64 mm) door ranges vary by function. No escutcheon available for 1 3 /

4

” (44 mm) doors standard. 2” to 2 3 /

8

” (51 mm to 60 mm) optional. Specify door thickness if other than 1 3 /

4

”.

Backset:

2-3/4” (70 mm) only.

Armored Front:

L9000-Series: 1 1 /

4

” x 8” x 7 /

32

” (32 mm x 203 mm x 6 mm) standard.

1 1 /

16

” x 8” x 1 7 /

32

” (27 mm x 203 mm x 6 mm) optional.

L400-Series: 4 7 /

16

” x 3 5 /

8

” x 1” (113 mm x 92 mm x 25 mm)

Case Size:

L9000-Series: 4 7 /

16

” x 6 1 /

16

” x 1” (113 mm x 154 mm x 25 mm)

L400-Series: 4 7 /

16

” x 3 5 /

8

” x 1” (113 mm x 92 mm x 25 mm)

Spacing:

Knob or lever to cylinder, 3 7 /

8

” (98mm); knob or lever to thumbturn hub, 2 11 /

16

” (68mm).

Bolts:

1” (25mm) throw stainless steel deadbolt and 3 /

4

” (19mm) throw stainless steel latch with anti-friction tongue.

Exposed Trim:

Knobs: #41 and #42 heavy-duty wrought brass, bronze or stainless steel knobs match D-Series knobs.

Levers: Forged brass or bronze and cast stainless steel. Designs available to match D-Series levers.

93 Lever Design: Extruded brass, bronze or stainless steel.

Mediterranean Designs: Forged-brass lever and rose.

Escutcheons: L escutcheons are cold-forged brass or bronze and stainless steel. N escutcheons are heavy wrought reinforced brass, bronze and stainless steel.

Trim Combinations: Available with knob both sides, lever both sides, or knob and lever with rose or escutcheon both sides.

Strike:

L9000-Series: ANSI curved lip strike 1 1 /

4

” x 4 7 /

8

” (32 mm x 124 mm) x

1 3 /

16

” (30 mm) lip to center with dust box standard. L400-Series: 1 1 /

8

” x 3 5 /

8

” (29 mm x 92 mm) with dust box.

Cylinder & Keys:

6-pin Everest C123 keyway cylinder with two patented keys standard.

Keying Options:

Interchangeable core and Primus high security cylinders. Master keying, grand master keying and construction keying.

34

Certifications

ANSI:

L9000: ANSI A156.13 Series 1000, Grade 1

Operational and Security, UL Listed for 3-hour fire door (except L9076 and L9007). With interchangeable core cylinders: Grade 2 Security.

With Concealed Shell Cylinder: A156.13 Grade 1

Operational and Security. ANSI/ASTM F476-76

Grade 40, UL Listed. L400: ANSI A156.5 Grade 1

California State Reference Code:

(Formerly Title 19, California State Fire

Marshal Standard) All levers with returns comply; levers return to within ½” of door face.

UL / cUL:

All locks listed for A label single doors, 4’ by 10’.

Letter F and UL symbol on latch front indicate listing. Electrified functions are UL19X Listed for single-point locking applications. UL437 Listed locking cylinder optional: specify Primus 20-500

Series cylinder.

Door Preparation for L9000 Series

1-1/4"

32 m m

2-3/4"

70 m m

3-7/8"

98 m m

6-1/4 "

159 m m

8"

203 m m

1"

25 m m

4-1/2"

114 m m

Door Preparation for L400 Series

1-1/4"

32 m m

2-3/4"

70 m m

3-3/4"

95 m m

5-9/16"

141 m m

1"

25 m m

4-1/2"

114 m m

How to Order

To order Schlage products, descriptive data should be in the same sequence as shown.

Line

Item

1

Qty

2

Product

3

Outside

Des Fin

4 5

Inside

Des Fin

6 7

Hand

8

Front

9

Strike

10

Door

Thickness

11

Ext

12

Dim

13

Additional Details

14

1 Line item number

2 Quality

3 Complete model number with function and cylinder type

To order cylinder options, change “P” at the end of the model number as follows:

L9453P Standard

L9453L Less standard cylinder. For Primus cylinder, specify this option and order Primus cylinder separately.

L945C With temporary plastic construction cylinder. Double cylinder functions ordered less cylinder are furnished with these construction cylinders to maintain timing of key cams.

L9453J

L9453R

Prepared for full size interchangeable core, less core. For Primus core, specify this option and order

Primus core separately.

With full-size conventional interchangeable core installed. Order control keys separately.

With full-size (temporary) construction core installed. Order all keys separately.

Compression

Ring & Spring

Blocking Ring

L9453BD

L9453GD

Prepared for small format (Falcon, Best, etc.) interchangeable core (SFIC), less core.

With Everest B Family restricted keyway small format core installed. Order control keys separately.

L9453HD With small format keyed brass construction core installed. Order all keys separately.

Cylinder Only Cylinder with

Compression

Ring & Spring

Cylinder with

Blocking Ring

L9453BDC With small format disposable plastic construction core installed.

11

12

13

6/7

8

9

10

4/5

Outside design / finish. Specify tactile warning (knurling) here as “8” before lever design, e.g. 803. To specify complete design, combine the numeric knob or lever design with the alpha rose or escutcheon design. Example: 03L, 93A, 42B.

When ordering Mediterranean design levers with L escutcheons, specify AST/00L, AVA/00L or MER/00L.

Inside design/finish. Leave blank if same as outside.

Hand. One hand per line item.

Front (use “Strike” field on Schlage form). Leave blank for standard armored front or enter number for narrow front.

Strike. Leave blank for standard or specify part number for optional strike. LLL = Less Strike.

Door thickness, if non-standard. Example: 200 = 2”.

Extension, to specify whether thick door is extended inside (EI), outside (EO), differently (ED) or equally (EE).

Dimension for strike lip lengths. See strike page for availability of specific dimensions with specific strikes.

100 = 1” 114 = 1 1 /

4

” 112 = 1 1 /

2

” 200 = 2”

118 = 1 1 /

8

” 138 = 1 3 /

8

” 134 = 1 3 /

4

14

Keying detail (e.g. key symbol, keyway, bitting) and other special requirements.

Example

Line

Item

4

5

6

1

2

3

Qty

10

50

50

50

50

10

Product

L9453P

L9453P

L9040

L9040

L9456P

L9456P

Outside

Des Fin

03A

03A

03A

03A

07L

07L

626

626

626

626

626

626

Inside

Des Fin

625

625

Hand

RH

LH

RH

LH

RH

LH

Front

09-668

09-668

Strike

10-091

10-091

Door

Thickness

138

138

Note:

Schlage order forms are available at no charge by contacting your IR Security & Safety Consultant or Customer Service.

Ext Dim Additional Details

35

Ingersoll Rand (NYSE:IR) advances the quality of life by creating and sustaining safe, comfortable and efficient environments. Our people and our family of brands—including Club Car®, Ingersoll Rand®, Schlage®, Thermo King® and Trane®—work together to enhance the quality and comfort of air in homes and buildings; transport and protect food and perishables; secure homes and commercial properties; and increase industrial productivity and efficiency.

Schlage is the leader in security devices, trusted for 90 years, spanning both the commercial and residential markets.

Ingersoll Rand is a $14 billion global business committed to a world of sustainable progress and enduring results.

securitytechnologies.ingersollrand.com

We are committed to using environmentally conscious print practices.

ingersollrand.com

©2013 Ingersoll Rand 002899 10/13

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement