9150 Rev 2 11

9150 Rev 2 11
prevention system
reverses gate on contact
utomatic self-setting
limits mean no limit switch
adjustments – ever
afety – built-in mechanical
and electronic reverse system
pecial anti-tailgating
feature helps to reduce
unauthorized vehicle access
fail-safe release
Never be locked out (or in)
of your property
dvanced microprocessor
control board features
programming switches to
set the mode of
operation required and has
ports for DKS plug-in loop
detectors to simplify wiring
onvenience outlets for
accessory transformers
built in
power and reset switches
90 galvanized steel frame
prrevents rusting
his operator meets or
exceeds the requirements
of the UL 325 and UL 991
safety standards and is
ETL Listed
• 5-year limited warranty
partial open
allows long gates to open 14
feet for automobile traffic, or
opens gate fully for large trucks
or oversized vans
lectronic magnetic
limits eliminate old style
mechanical switches that can
wear out, break, or fail
The DKS 9150 series of slide gate operators offer convenience, reliability and safe
operation in a small, compact design. These operators are ideally used in residential,
commercial or industrial high-use applications. The innovative fail-safe design of these
operators significantly reduces the chance of injury or entrapment and makes these
operators the safest slide gate operators in the market today! Designed with versatility in
mind, these operators can be configured for front, center or rear drive applications and can
be configured for front, center or rear drive applications and can be pad or post mounted.
Advanced Features
Automatic limit adjustment
Auto-close timer 1-23 sec
Selectable stop / reverse loop function
Timer override feature helps prevent tailgating
Partial open feature
Built in On / Off switch
Built in alarm reset switch
Two 115 VAC convenience outlets for
accessory transformers
Automatically assumes fail-safe mode
when an entrapment condition exists
Ports for plug-in open and reverse loop detectors.
DKS plug-in detectors only
1/2 HP & 1 HP
15.25” W x 24.75” H x 16.75” D
387mm W x 628mm H x 425mm D
Gate Tacker reporting output provides
operator data to access control system
(DKS systems with card access only)
9150 1/2 HP Specs
Class of
Max Gate Max Gate HP Power Convenience
Length *
Weight *
115 VAC, 60 Hz, 5.4A
Open Package
I, II, III, IV 30 Ft 1000 Lbs. 1/2 HP 60 cycles/hr 208 VAC, 60 Hz, 2.8A** Optional
(9.1 m)
(453.6 kg)
continuous duty
230 VAC, 60 Hz, 2.7A**
460 VAC, 60 Hz, 1.4A**
9150 1 HP Specs
Class of
Max Gate Max Gate HP operation
Length *
Weight *
I, II, III, IV 45 Ft 1500 Lbs. 1HP 60 cycles/hr
(13.7 m)
(680.3 kg)
continuous duty
Power 115 VAC, 60 Hz, 7.0A
208 VAC, 60 Hz, 5.0A** 230 VAC, 60 Hz, 3.5A**
460 VAC, 60 Hz, 1.8A**
Open Package
ssumes gate to be in good condition and must be on a level surface.
When combined with convenience open option, 1/2HP max weight is 800 Lbs., and 1300 Lbs. with 1HP.
** These operators use a step-down transformer, to achieve 115 VAC operating voltage.
General Specs
Primary Reduction: Single cog belt
External obstruction sensing devices must be
used with this operator
Chain: #40
Speed: Approximately 10 in/sec (254 mm/sec)
Cover: Steel cover is plated and painted
Frame: G90 Galvanized steel to prevent rusting
Manual Release
Fail Safe:
Push gate open
Fail Secure: Keyed release optional
Options Available
Nickel plated chain
Stainless steel chain
Plug-in loop detectors
Heater kit for cold environments
Safety Standards
Complies with the UL 325 and UL 991
safety standards
ETL listed
Operating Temp
10ºF to 140ºF
-12ºC to 62ºC
Heater kit recommended for colder environments
Base plate to post mount (posts not included)
Shipping Weight
Fail-secure keyed release
Approximately 125-185 lbs (56-84 kg)
Operator kit
includes chain brackets, hardware, and
20-feet (6 m) of #40 chain
5-year limited factory warranty
Distributed by:
D O O R K I N G, I N C.
120 Glasgow Avenue, Inglewood, California 90301 U.S.A. Tel: 310-645-0023 FAX: 310-641-1586 www.doorking.com
© 2011 All Rights Reserved. Product specifications may change without notice. Rev. 2/11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF