Control Circuit Components LOGO! Logic Module & SITOP Power Supplies Contents Pages

Control Circuit Components LOGO! Logic Module & SITOP Power Supplies Contents Pages
Control Circuit Components
LOGO! Logic Module & SITOP Power Supplies
Contents
Pages
LOGO! Programmable Relays
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15/2
LOGO! Modular Basic Variants
LOGO! 24, 12/24RC, 24RC, 230RC . . . . . . . . . . 15/3 - 15/4
LOGO! Modular Pure Variants
LOGO! 24Co, 12/24RCo, 24RCo, 230RCo. . . . . 15/5 - 15/6
LOGO! Modular Expansion Modules
LOGO! DM8 24, DM8 12/24R, DM8 24R, DM8 230R. 15/7
LOGO! DM16 24, DM16 24R, DM16 230R. . . . . . . . . 15/7
LOGO! AM2, AM2 PT100. . . . . . . . . . . . . . . . . . . . . . . 15/7
LOGO! Contact & LOGO! TD. . . . . . . . . . . . . . . . . . . 15/8
LOGO! Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15/9
LOGO! Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15/10
SITOP Power Supplies & Power Security Components
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15/20
Low Wattage, Single Phase Power Supplies.
(15 - 96 Watts). . . . . . . . . . . . . . . . . . . . . . . 15/12 - 15/13
Basic, Single Phase Power Supplies.
(36 - 300 Watts). . . . . . . . . . . . . . . . . . . . . . 15/14 - 15/15
Standard, Single Phase Power Supplies .
(60 - 960 Watts). . . . . . . . . . . . . . . . . . . . . . 15/16 - 15/17
Standard, Three Phase Power Supplies.
(120 - 960 Watts). . . . . . . . . . . . . . . . . . . . . 15/18 - 15/19
Special design power supplies in Single.
and Three Phase (30 - 720 Watts). . . . . . . . 15/20 - 15/21
Expansion Modules: Signaling, Redundancy,.
Buffer, & Diagnostic Modules. . . . . . . . . . . . . . . . . 15/22
DC Uninterruptible Power Supplies . . . . . . . . 15/23 - 15/25
SIMATIC Net
Ethernet Infrastructure Components Overview. . . . . 15/26
Siemens Industry, Inc.
Industrial Controls Catalog
15/1
LOGO! logic module
Introduction
LOGO! logic module
Overview
LOGO! logic module
• The compact, easy-to-use and low-cost solution for simple
control tasks
• Compact, easy to operate, universally applicable without
accessories
• "All in one": Integrated display and operator panel
• 36 different functions can be connected at the click of a button
or by means of PC software; up to 130 times over
• Functions are easily changed at the press of a key.
No more time-consuming rewiring
15/2
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
Siemens Industry, Inc.
Industrial Controls Catalog
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
• The space-saving basic variants
• Interface for the connection of expansion modules, up to
24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
• With connection option for LOGO! text display TD
(can be connected to all LOGO! 0BA6 basic variants)
Overview
New in LOGO! 0BA7 variants:
• Ethernet interface for communication with SIMATIC Controller,
SIMATIC Panel and PC
• Networking of max. 8 LOGO! devices
• Use of standard SD card or SIMATIC memory card
Ordering data
Order No.
LOGO! logic module 24C
6ED1 052-1CC01-0BA6
Order No.
LOGO! logic module 230RC
24 V DC power supply,
8x 24 V DC digital inputs,
of which 4 can be used in analog
mode (0 to 10 V),
4x 24 V DC digital outputs,
0.3 A, integral time switch;
200 function blocks can
be interlinked,
modular expansion capability
115/230 V AC/DC power supply,
8x 115/230 V AC/DC digital inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can
be interlinked,
modular expansion capability
LOGO! logic module 12/24RC
12/24 V DC power supply,
8x 12/24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V)
4x 10 A relay outputs,
integral time switch;
400 function blocks can
be interlinked,
Ethernet interface,
modular expansion capability
LOGO! logic module 12/24RCE
6ED1 052-1MD00-0BA6
12/24 V DC power supply,
8x 12/24 V DC digital inputs, of
which 4 can be used in analog
mode (0 to 10 V)
4x 10 A relay outputs,
integral time switch;
200 function blocks can
be interlinked,
modular expansion capability
LOGO! logic module 24RC
24 V AC/DC power supply,
8x 24 V AC/DC digital inputs,
4x 10 A relay outputs,
integral time switch;
200 function blocks can
be interlinked,
modular expansion capability
Siemens Industry,
Inc.
Industrial Controls
Catalog
6ED1 052-1HB00-0BA6
LOGO! logic module 230RCE
6ED1 052-1FB00-0BA6
6ED1 052-1MD00-0BA7
6ED1 052-1FB00-0BA7
115/230 V AC/DC power supply,
8x 115/230 V AC/DC digital inputs,
4x 10 A relay outputs,
integral time switch;
400 function blocks can
be interlinked,
Ethernet interface,
modular expansion capability
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
15/3
LOGO! logic module
LOGO! modular
LOGO! modular basic variants
Ordering data
Order No.
Accessories
Order No.
LOGO! PC cable
LOGO! TD text display
6ED1 055-4MH00-0BA0
4-line text display, can be connected to all LOGO! 0BA6 Basic
and Pure versions, including connecting cable
LOGO! USB PC cable
6ED1 057-1AA01-0BA0
For transferring the program
between LOGO! and PC,
including driver on CD-ROM
LOGO! Manual
German
6ED1 050-1AA00-0AE8
LOGO! modem cable
English
6ED1 050-1AA00-0BE8
French
6ED1 050-1AA00-0CE8
Adapter cable for analog modem
communication
Spanish
6ED1 050-1AA00-0DE8
Italian
6ED1 050-1AA00-0EE8
Chinese
6ED1 050-1AA00-0KE8
LOGO! Memory Card
6ED1 056-1DA00-0BA0
Program module for copying,
with know-how protection
LOGO! battery card
6ED1 057-1AA00-0BA0
For program transfer between
LOGO! and the PC
6ED1 057-1CA00-0BA0
Front panel mounting set
Width 4 MW
6AG1 057-1AA00-0AA0
Width 4 MW, with keys
6AG1 057-1AA00-0AA3
Width 8 MW
6AG1 057-1AA00-0AA1
Width 8 MW, with keys
6AG1 057-1AA00-0AA2
6ED1 056-6XA00-0BA0
Battery module for backing
up the integral real-time clock
(not LOGO! 24)
LOGO! memory/battery card
6ED1 056-7DA00-0BA0
Combined program and battery
module, with know-how protection
and for backing up the integral realtime clock (not LOGO! 24)
LOGO! PROM
6AG1 057-1AA01-0BA6
Programming device used to simultaneously reproduce program module contents on up to 8 program
modules
LOGO!Soft Comfort V7.0
6ED1 058-0BA02-0YA1
For programming on the PC in
LAD/FBD; executes on Windows 7,
VISTA, XP, NT4.0, 2000, 98SE, Linux
and MAC OSX; on CD-ROM
LOGO!Soft Comfort V7.0 upgrade
6ED1 058-0CA02-0YE1
Upgrade from V1.0 to V7.0
15/4
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
Siemens Industry, Inc.
Industrial Controls Catalog
LOGO! logic module
LOGO! modular
LOGO! modular pure variants
• The cost-optimized basic variants
• Interface for the connection of expansion modules, up to
24 digital inputs, 16 digital outputs, 8 analog inputs and
2 analog outputs can be addressed
• With connection option for LOGO! TD text display
(can be connected to all LOGO! 0BA6 basic variants)
Overview
Ordering data
Order No.
LOGO! logic module 24Co
6ED1 052-2CC01-0BA6
SIPLUS LOGO! TD text display
115/230 V AC/DC power supply,
8 digital inputs 115/230 V AC/DC,
4 relay outputs 10 A,
integral time clock;
without display and keyboard;
200 function blocks can
be interlinked,
modular expansion capability
Siemens Industry,
Inc.
Industrial Controls
Catalog
6AG1 055-4MH00-2BA0
(extended temperature range
-10 ... +60 °C and medial loading)
6ED1 052-2MD00-0BA6
4-line text display, can be
connected to all LOGO! 0BA6
Basic and Pure versions,
including connecting cable
LOGO! Manual
6ED1 052-2HB00-0BA6
24 V AC/DC power supply,
8 digital inputs 24 V AC/DC,
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can
be interlinked,
modular expansion capability
LOGO! logic module 230RCo
6ED1 055-4MH00-0BA0
4-line text display, can be
connected to all LOGO! 0BA6
Basic and Pure versions,
including connecting cable
12/24 V DC power supply,
8 digital inputs 12/24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 relay outputs 10 A,
integral time switch;
without display and keyboard;
200 function blocks can
be interlinked,
modular expansion capability
LOGO! logic module 24RCo
Accessories
LOGO! TD text display
24 V DC power supply,
8 digital inputs 24 V DC,
of which 4 can be used in analog
mode (0 to 10 V),
4 digital outputs 24 V DC, 0.3 A,
integrated time switch;
without display and keyboard;
200 function blocks can
be interlinked,
modular expansion capability
LOGO! logic module 12/24RCo
Order No.
German
6ED1 050-1AA00-0AE8
English
6ED1 050-1AA00-0BE8
French
6ED1 050-1AA00-0CE8
Spanish
6ED1 050-1AA00-0DE8
Italian
6ED1 050-1AA00-0EE8
Chinese
6ED1 050-1AA00-0KE8
LOGO! Memory Card
6ED1 056-1DA00-0BA0
Program module for copying,
with know-how protection
LOGO! battery card
6ED1 052-2FB00-0BA6
6ED1 056-6XA00-0BA0
Battery module for backing
up the integral real-time clock
(not LOGO! 24)
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
15/5
LOGO! logic module
LOGO! modular
LOGO! modular pure variants
Selection and ordering data (continued)
LOGO! memory/battery card
6ED1 056-7DA00-0BA0
Combined program and battery
module, with know-how protection
and for backing up the integral realtime clock (not LOGO! 24o)
LOGO! PROM
LOGO! USB PC cable
Programming device used to simultaneously reproduce program
module contents on up to 8 program
modules
6ED1 058-0BA02-0YA1
6ED1 057-1AA01-0BA0
For transferring the program
between LOGO! and PC,
including driver on CD-ROM
LOGO! modem cable
For programming on the PC in
LAD/FBD; executes on Windows 7,
VISTA, XP, NT4.0, 2000, 98SE, Linux
and MAC OSX; on CD-ROM
LOGO!Soft Comfort V7.0 upgrade
6ED1 057-1AA00-0BA0
For program transfer between
LOGO! and the PC
6AG1 057-1AA01-0BA6
LOGO!Soft Comfort V7.0
LOGO! PC cable
6ED1 057-1CA00-0BA0
Adapter cable for analog modem
communication
LOGO! Starter kits (0BA6)
LOGO! TD Starter kit
6ED1 058-0CA02-0YE1
Language-neutral
with LOGO! 12/24RCo + LOGO! TD
6ED1 057-3BA10-0AA6
Upgrade from V1.0 to V7.0
15/6
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
Siemens Industry, Inc.
Industrial Controls Catalog
LOGO! logic module
LOGO! modular
LOGO! modular expansion modules
• Expansion modules for connection to LOGO! modular
• With digital inputs and outputs, analog inputs, or analog
outputs
Overview
Ordering data
Order No.
LOGO! DM8 24
6ED1 055-1CB00-0BA0
6ED1 055-1CB10-0BA0
Supply voltage 24 V DC,
8 digital inputs 24 V DC,
8 digital outputs 24 V DC, 0.3 A
LOGO! DM8 12/24R
6ED1 055-1MB00-0BA1
Supply voltage 12/24 V DC,
4 digital inputs 12/24 V DC,
4 relay outputs 5 A
LOGO! DM8 24R
6ED1 055-1HB00-0BA0
Supply voltage24 V AC/DC,
4 digital inputs 24 V AC/DC,
4 relay outputs 5 A
LOGO! DM16 24R
6ED1 055-1NB10-0BA0
Supply voltage 24 V DC,
8 digital inputs 24 V DC,
8 relay outputs 5 A
LOGO! DM8 230R
German
6ED1 050-1AA00-0AE8
English
6ED1 050-1AA00-0BE8
French
6ED1 050-1AA00-0CE8
Spanish
6ED1 050-1AA00-0DE8
Italian
6ED1 050-1AA00-0EE8
Chinese
6ED1 050-1AA00-0KE8
LOGO! Memory Card
6ED1 056-1DA00-0BA0
for copying,
with know-how protection
LOGO!Soft Comfort V7.0
6ED1 055-1FB00-0BA1
6ED1 058-0BA02-0YA1
For programming on the PC in
LAD/FBD; executes on Windows 7,
VISTA, XP, NT4.0, 2000, 98SE, Linux
and MAC OSX; on CD-ROM
LOGO!Soft Comfort V7.0 upgrade
Supply voltage 115/230 V AC/DC,
4 digital inputs 115/230 V AC/DC,
4 relay outputs 5 A
LOGO! DM16 230R
Accessories
LOGO! Manual
Supply voltage 24 V DC,
4 digital inputs 24 V DC,
4 digital outputs 24 V DC, 0.3 A
LOGO! DM16 24
Order No.
6ED1 058-0CA02-0YE1
Upgrade from V1.0 to V7.0
LOGO! PC cable
6ED1 057-1AA00-0BA0
For program transfer between
LOGO! and the PC
6ED1 055-1FB10-0BA0
Supply voltage 115/230 V AC/DC,
8 digital inputs 115/230 V AC/DC,
8 relay outputs 5 A
LOGO! AM2
6ED1 055-1MA00-0BA0
Supply voltage 12/24 V DC,
2 analog inputs 0 ... 10 V or
0 ... 20 mA, 10-bit resolution
LOGO! AM2 PT 100
6ED1 055-1MD00-0BA1
Supply voltage 12/24 V DC,
2 analog inputs Pt100,
temperature range -50 °C ... 200 °C
LOGO! AM2 AQ
6ED1 055-1MM00-0BA1
Supply voltage 24 V DC,
2 analog outputs 0 to 10 V,
0/4 to 20 mA
Siemens Industry,
Inc.
Industrial Controls
Catalog
2/14
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
15/7
LOGO! logic module
LOGO! modular
LOGO! contact & LOGO! TD
■ Overview
■ Ordering Data
Order No.
LOGO!Contact
Module for direct switching of
resistive consumers up to 20 A
and motors up to 4 kW
Switching voltage 24 V
6ED10574CA000AA0
Switching voltage 230 V
6ED10574EA000AA0
• Switching module for the direct switching of resistive loads
and motors
LOGO! TD Text Display
6ED10554MH000BA0
• 4-line backlit LCD, 128x64 pixel resolution
• 24 VDC/VAC input voltage, includes connecting cable (2.5M)
& mounting hardware
• 6 screen navigation keys and 4 user function buttons
• Power-on screen and backlight activate function
• Text, numeric display and timer/counter set point changes
• Advanced bar-graph and text ticker features
15/8
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
Siemens Industry, Inc.
Industrial Controls Catalog
LOGO! logic module
LOGO! Power
LOGO! Power
Overview
no-load operation has been cut in half. The wide-range input
now also allows operation with direct voltage, the switch-on
behavior has been optimized for capacitive loads, and the
operating temperature range has been extended to +70 °C. The
power supplies with logic module design can be used extremely
flexibly in numerous applications – thanks to their flat, stepped
profile in distribution boards, for example.
The flat power supply unit for distribution boards
The new miniature power supply units now offer even greater
performance in the smallest space: The efficiency has been
improved across the entire load range, and the power loss in
Ordering data
Essential product features
• 2 performance classes, each with 5 V, 12 V, and 15 V
• 3 performance classes with 24 V
• Flat LOGO! design
• Wide-range input for 85 V to 264 V AC or 110 V to 300 V DC
• Constant current for connection of loads with high inrush
current
• Power reserve on starting up through 1.5 times the rated
current for capacitive loads
• Adjustable output voltage
• Green LED for "Output voltage OK"
• Temperature range from –20 °C to +70 °C
• Comprehensive certification, e.g. ATEX and GL
Order No.
Order No.
LOGO!Power 5 V
LOGO!Power 15 V
Stabilized power supply;
output: 5 V DC/3 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
6EP1 311-1SH03
Stabilized power supply;
output: 15 V DC/1.9 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
6EP1 351-1SH03
6EP1 311-1SH13
Stabilized power supply;
output: 15 V DC/4 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
6EP1 352-1SH03
LOGO!Power 12 V
LOGO!Power 24 V
Stabilized power supply;
output: 12 V DC/1.9 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
6EP1 321-1SH03
Stabilized power supply;
output: 24 V DC/1.3 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
6EP1 331-1SH03
6EP1 322-1SH03
Stabilized power supply;
output: 24 V DC/2.5 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
6EP1 332-1SH43
Stabilized power supply;
output: 24 V DC/4 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
6EP1 332-1SH52
Stabilized power supply;
output: 5 V DC/6.3 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
Stabilized power supply;
output: 12 V DC/4.5 A
• Input rated value:
100 … 240 V AC;
extended operating temperature
range: up to +70 °C
Siemens Industry,
Inc.
Industrial Controls
Catalog
Further information see Siemens Catalog ST 70
Further information about LOGO! Logic Module on the internet: www.siemens.com/logo
15/9
LOGO! logic module
LOGO! Power
LOGO! software
Overview
Ordering data
Order No.
LOGO!Soft Comfort V7.0
6ED1 058-0BA02-0YA1
For programming on the PC in
LAD/FBD; executes on Windows 7
(32/64 bit), VISTA, XP, NT4.0, 2000,
98SE, Linux and MAC OSX;
on CD-ROM
LOGO!Soft Comfort V7.0 upgrade
6ED1 058-0CA02-0YE1
Upgrade from V1.0 to V7.0
• The user-friendly software for creating control programs
on a PC
• Creation of control programs in Function Block Diagram (FBD)
or Ladder Diagram (LAD)
• Plus testing, simulation, online testing and archiving of control
programs
• Professional documentation via numerous comment and print
functions
Minimum system requirements
Windows 98 SE, NT 4.0, ME, 2000, XP (32 bit),
Vista or 7 (32/64 bit)
• PC Pentium.
• 90 MB free disk capacity.
• 64 MB RAM.
• SVGA graphics card with minimum resolution 800x600
(256 colors).
Mac OS X
• Mac OS X 10.4 with J2SE 1.5.0
• Mac OS X 10.5 with J2SE 1.6.0
• PowerMac G3, G4, G4 Cube, IMac, PowerBook G3, G4 or
iBook.
Linux
• Tested with SUSE Linux 10 SP2, kernel 2.6.16
• Runs on all Linux distributions on which the Java 2 SDK
Version 1.3.1 runs.
• Please refer to your relevant Linux distribution for the
necessary hardware requirements.
15/10
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
Switched Mode Regulated Technology
Introduction
DC Power supplies for single phase applications
15 watts to 96 watts
DC Power Supplies for basic, single phase applications
36 watts to 300 watts
•Wide input voltage range on AC and DC networks for wide
range of application uses, worldwide
•Designed for basic applications that require switched-mode,
regulated technology at a competitive price.
•Output voltages of 5, 12, 15, or 24 VDC
•SITOP Lite available in 24 VDC 2.5A, 5A, or 10 A
•Wide operating temperature range from -20° to +70° C
•SITOP Direct Mount available in 12 VDC and 24 VDC output
voltages up to 300 Watts
•Worldwide agency approvals allow for universal applications
•SITOP Direct Mount: direct wall mounting, allowing for variable
mounting positions
DC Power supplies for standard and demanding single
phase applications 60 watts to 960 watts
DC Power Supplies for three-phase applications
120 watts to 960 watts
•SITOP Smart available in 12 VDC or 24 VDC output voltages
•Robust metal housing and metal DIN rail clip
•SITOP Modular 5A and 10A can be used on single phase
and three phase networks
•SITOP Smart available in 24 VDC 10A, 20A, or 40A
•Built-in relay contact for feedback to upper level control
system for most units
•SITOP Smart 24 VDC/10A wall-mount version available for
high shock and vibration requirements
•Comprehensive certifications for HazLoc and Marine
applications
•Great for use with power security add-on modules
•SITOP Modular available in 24VDC and 48VDC output voltages
•Integrated signaling contact for “24 V OK”, high efficiencies,
and slim, compact design
•Extra power of 150% for brief operational overloads for most
units. SITOP Modular units feature power boost of 300% for
25ms for tripping protective devices.
•Great for use with power security add-on modules
Power Security Add-ons
DC Uninterruptible Power Supplies
•The signaling module with signal contacts and remote ON/OFF
function optimally integrates SITOP modular devices without
integral signaling contact into automated plants.
•DC UPS Modules (6A, 15A or 40A) in conjunction with battery
modules (ranging from 1.2 Ah to 12 Ah) offer high security and
availability of the power network
•For maximum availability, the redundancy module decouples
SITOP power supplies of the same type.
•DC UPS with capacitor back-up with with integrated energy
storage 2.5 or 5 kWs, combinable with up to three expansion
modules for absolutely maintenance free back-up thanks to
high-capacity double layer capacitors
•The buffer module bridges short power failures up to 3 seconds
with capacitors as energy storage.
•The SITOP select diagnosis and the newer, selectivity module
offer selective protection of individual 24 V paths against overload and short-circuits. With this protection and by means of
fast fault localization, downtimes can be reduced to a minimum.
Siemens Industry, Inc.
Industrial Controls Catalog
•The new DC UPS 1600 modules now offer reliable back-up in
conjunction with DC UPS 1100 battery modules in 1.2, 3.2, or
7 Ah with even more possibilities for diagnostics and system
integration thanks to an integrated web server and the option of
an Ethernet/PROFINET interface
15/11
SITOP Power Supplies
Low Wattage, Single Phase Switched-Mode Technology
LOGO! Power:
The flat power supply unit for distribution boards
Overview
These miniature power supply units offer great performance in
a small space. They feature high efficiencies across the entire
load range and lower power losses in no-load operation.
The wide-range input allows operation on both AC and DC
networks and the switch-on behavior has been optimized for
capacitive loads. The operating temperature range has been
extended to -20°C to +70°C allowing these power supplies
with logic module design to be used in numerous applications
- particularly suited for use in distribution boards thanks to
their flat, stepped profile.
n 2
peformance classes each for 5 VDC, 12 VDC,
and 15 VDC
n 3
performance classes for 24 VDC units
n Flat,
stepped profile design
n Wide-range
input for 85 - 264 VAC or 110 - 300 VDC
n Constant
current for connection of loads with high
inrush current
n Power
reserve on starting up through 1.5x rated current
Selection and ordering data
15/12
Output Output
Voltage Current
(V DC) (A)
Power Rated
(W)
Input
Voltage
Dimensions Ambient
(WxHxD)
Temperature
mm
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
5
3
15
85..264 VAC
110..300 VDC
54x90x55
-20°C…+70°C
77%
Constant
Current
CE, cULus, GL,
ABS, ATEX, NEC
Class2, Class I
Div 2, FM
6EP1311-1SH03
12
1.9
23
85..264 VAC
110..300 VDC
54x90x55
-20°C…+70°C
80%
Constant
Current
CE, cULus, FM,
GL, ABS, ATEX,
NEC Class 2,
Class I Div 2
6EP1321-1SH03
15
1.9
29
85..264 VAC
110..300 VDC
54x90x55
-20°C…+70°C
80%
Constant
Current
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL , ABS
6EP1351-1SH03
24
1.3
31
85..264 VAC
110..300 VDC
54x90x55
-20°C…+70°C
85%
Constant
Current
CE, cULus, FM,
GL, ABS, ATEX,
NEC Class 2,
Class I Div 2
6EP1331-1SH03
5
6.3
32
85..264 VAC
110..300 VDC
72x90x55
-20°C…+70°C
83%
Constant
Current
CE, cULus, GL,
ABS, ATEX,
Class I Div 2
6EP1311-1SH13
12
4.5
54
85..264 VAC
110..300 VDC
72x90x55
-20°C…+70°C
85%
Constant
Current
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL, NEC
Class 2
6EP1322-1SH03
15
4
60
85..264 VAC
110..300 VDC
72x90x55
-20°C…+70°C
85%
Constant
Current
CE, cULus, FM,
GL, ABS, ATEX,
cCSAus Class I
Div 2, NEC
Class 2
6EP1352-1SH03
24
2.5
60
85..264 VAC
110..300 VDC
72x90x55
-20°C…+70°C
88%
Constant
Current
CE, cULus, FM,
GL, ABS, ATEX,
cCSAus Class I
Div 2
6EP1332-1SH43
24
4
96
85..264 VAC
110..300 VDC
90x90x55
-20°C…+70°C
89%
Constant
Current
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL
6EP1332-1SH52
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
Low Wattage, Single Phase Switched-Mode Technology
SITOP Compact:
The slim power supply unit for control boxes
Overview
Thanks to the extremely space-saving slim design, this power
supply series for lower performance ranges is especially suited
to distributed applications in control boxes or in small control
cabinets. These power supplies are characterized by their
low power losses throughout the load range. The losses are
extremely low even while idling, which makes them great for
supply machines and plants which are frequently in stand-by
mode. These power supply units have a wide range input for
AC and DC networks and plug-in terminals that facilitate the
electrical connection.
n Small
mounting surface thanks to its slim design
n Wide-range
input for 85 - 264 VAC or 110 - 300 VDC
n Low
energy consumption during no-load operation or
stand-by
n High
efficiency across the entire load range
n Up
to 28% energy savings in comparison to similar
devices
n Plug-in
terminals for easy electrical connection
Selection and ordering data
Siemens Industry, Inc.
Industrial Controls Catalog
Output
Voltage
(V DC)
Output
Current
(A)
Power
(W)
Rated
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
24
0.6
14
85..264 VAC
110..300 VDC
22.5x80x100
-20°C…+70°C
82%
Auto
Restart
CE, cULus,
cCSAus,
ATEX, Class I
Div 2 GL, ABS,
NEC Class 2
6EP1331-5BA00
12
2
24
85..264 VAC
110..300 VDC
30x80x100
-20°C…+70°C
82%
Auto
Restart
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL ABS
6EP1321-5BA00
24
1.3
31
85..264 VAC
110..300 VDC
30x80x100
-20°C…+70°C
86%
Auto
Restart
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL, ABS,
NEC Class 2
6EP1331-5BA10
24
2.5
60
85..264 VAC
110..300 VDC
45x80x100
-20°C…+70°C
89%
Auto
Restart
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL, ABS,
NEC Class 2
6EP1332-5BA00
12
6.5
78
85..264 VAC
110..300 VDC
52.5x80x100
-20°C…+70°C
85%
Auto
Restart
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL, ABS
6EP1322-5BA10
24
3.7
89
85..264 VAC
110..300 VDC
52.5x80x100
-20°C…+70°C
87%
Auto
Restart
CE, cULus,
cCSAus,
ATEX, NEC
Class 2, GL,
ABS, Class I
Div 2
6EP1332-5BA20
24
4
96
85..264 VAC
110..300 VDC
52.5x80x100
-20°C…+70°C
88%
Auto
Restart
CE, cULus,
cCSAus,
ATEX, Class I
Div 2, GL, ABS
6EP1332-5BA10
15/13
SITOP Power Supplies
Basic, Single Phase Switched-Mode Technology
SITOP Lite: Low-cost basic power supply
Overview
This new range of power supplies is designed for standard
requirements in industrial environments and offers all important
functions at a favorable price, of course without compromising
quality and the proverbial SITOP reliability. The wide range input
with manual switchover supports connection to a wide range of
1-phase supply systems.
n 24
VDC/ 2.5A, 5A,10A for industrial applications with
standard requirements
Thanks to the narrow width, the primary switched-mode units
require little space on the DIN rail, and the good efficiency results
in low thermal losses in the control cabinet. Short-circuit and
overload protection as well as UL approval for export ensure
problem- free use.
n Parallel
n 1-phase
n Narrow
n High
wide-range input with manual switch-over
mounting width
degree of efficiency
connection possible
n Ambient
temperature range of 0…+60°C
(above +45°C with derating)
Selection and ordering data
15/14
Output
Voltage
(V DC)
Output
Current
(A)
Power
(W)
Rated
Input
Voltage
24
2.5
60
24
5
24
10
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
85..132/ VAC
32.5x125x125 0°C…+60°C
170…264 VAC
(manual switch)
85%
Constant
Current
CE, cULus
6EP1332-1LB00
120
85..132/ VAC
50x125x125
170…264 VAC
(manual switch)
0°C…+60°C
86%
Constant
Current
CE, cULus
6EP1333-1LB00
240
85..132/ VAC
70x125x125
170…264 VAC
(manual switch)
0°C…+60°C
90%
Constant
Current
CE, cULus
6EP1334-1LB00
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
Basic, Single Phase Switched-Mode Technology
SITOP Direct Mount:
Cost-effective power supply for wall mounting
Overview
This attractively priced regulated power supplies can be
screwed directly onto the wall. The rugged aluminum enclosure
with IP20 degree of protection can be variably mounted in
different positions, even in applications with high temperatures
and high shock and vibration requirements.
The wide-range input enables connectivity to the most diverse
supply networks worldwide and ensures reliable 12 V DC or 24
V DC supply even if there are large voltage fluctuations. Short
circuit and overload protection as well as international certifications ensure problem free and universal use.
n Wall
mounting for variable mounting positions
n Aluminum,
IP 20 enclosure
n High
shock and vibration resistance for harsh
environments
n 1
phase wide-range input 85..264 VAC
n UL
508 rated
Selection and ordering data
Siemens Industry, Inc.
Industrial Controls Catalog
Output
Voltage
(V DC)
Output
Current
(A)
Power
(W)
Rated
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
12
3
36
85..264 VAC
97x98x38
-10°C…+70°C
84%
Auto
Restart
CE, cULus,
cURus
6EP1321-1LD00
24
2.1
50
85..264 VAC
97x128x38
-10°C…+70°C
86%
Auto
Restart
CE, cULus,
cURus
6EP1331-1LD00
24
3.1
74
85..264 VAC
97x128x38
-10°C…+70°C
86%
Auto
Restart
CE, cULus,
cURus
6EP1332-1LD00
12
8.3
100
85..264 VAC
97x158x38
-10°C…+70°C
84%
Auto
Restart
CE, cULus,
cURus
6EP1322-1LD00
24
4.1
98
85..264 VAC
97x158x38
-10°C…+70°C
86%
Auto
Restart
CE, cULus,
cURus
6EP1332-1LD10
24
6.2
149
85..264 VAC
97x178x38
-10°C…+70°C
86%
Auto
Restart
CE, cULus,
cURus
6EP1333-1LD00
24
12.5
300
85..264 VAC
105x199x38
-10°C…+70°C
86%
Auto
Restart
CE, cULus,
cURus
6EP1334-1LD00
15/15
SITOP Power Supplies
Standard, Single Phase Switched-Mode Technology
SITOP Smart:
The powerful standard power supply
Overview
SITOP smart is the optimum power supply for standard
applications in 12 VDC or 24 VDC. They offer compact
dimensions, a strong performance, and a favorable price.
Despite its compactness it offers an outstanding overload withstand capability. Thanks to the extra power feature with
1.5 times the rated current for 5 seconds, even large loads can
be switched on without any problems. With a continuous rated
power of 120 percent, the slim power supply units are among
the most reliable of their kind. Numerous certifications facilitate
the universal and global use and permit their use in hazardous
areas.
n Output
voltages in 12 VDC or 24 VDC
n All
24 VDC units feature 120% continuous overload at
45°C or less
n All
units with extra power of 1.5x rated current for 5s/min
n All
12 VDC and 24 VDC units (except the Wallmount
variation) feature automatic input range detection and an
integrated relay contact
n SITOP
Smart Wallmount 24V/10 A version for applications that require high shock and vibration
Selection and ordering data
15/16
Output
Voltage
(V DC)
Output
Current
(A)
Power Rated
(W)
Input
Voltage
Dimensions
(WxHxD)
mm
24
2.5
3 (to 45°C)
60
85..132/ VAC
170…264 VAC
(automatic
switch
24
5
6 (to 45°C)
120
12
7
84
24
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
32.5x125x125 -10°C…+70°C
85%
Constant
Current
CE, cULus,
ATEX, GL,
Class I Div 2
6EP1332-2BA20
85..132/ VAC
170…264 VAC
(automatic
switch
50x125x125
-10°C…+70°C
88%
Constant
Current
CE, cULus,
ATEX, GL,
Class I Div 2
6EP1333-2BA20
85..132/ VAC
170…264 VAC
(automatic
switch
50x125x125
-10°C…+70°C
84%
Constant
Current
CE, cULus,
ATEX, GL,
Class I Div 2
6EP1322-2BA00
10
240
12 (to 45°C)
85..132/ VAC
170…264 VAC
(automatic
switch
70x125x125
-10°C…+70°C
87%
Constant
Current
CE, cULus,
ATEX, GL,
Class I Div 2
6EP1334-2BA20
12
14
168
85..132/ VAC
170…264 VAC
(automatic
switch
70x125x125
-10°C…+70°C
87%
Constant
Current
CE, cULus,
ATEX, GL,
Class I Div 2
6EP1323-2BA00
24
10
240
12 (to 45°C)
85..132/ VAC
170…264 VAC
(automatic
switch
70x125x125
0°C…+60°C
90%
Constant
Current
CE, UL, CSA,
ATEX, GL,
Class I Div 2
6EP1334-2AA010AB0
24
20
480
24 (to 45°C)
85..132/ VAC
170…264 VAC
(automatic
switch
115x145x150
0°C…+70°C
90%
Auto
Restart
CE, UL, CSA,
ATEX, GL,
Class I Div 2
6EP1336-2BA10
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
Standard, Single Phase Switched-Mode Technology
SITOP Modular: The technology
power supply for demanding solutions
Overview
SITOP modular fulfills the highest functionality requirements,
e.g. for use in complex plants and machines. The wide-range
input allows a connection to almost any electrical power
system worldwide and ensures a high degree of safety even if
there are large voltage fluctuations. The power boost provides
up to three times the rated current for brief periods. In the
event of an overload, you have two options: Constant
current with automatic restart or latching shutdown. The
newly innovated PSU100M features a DC input voltages
and an integrated signaling contact.
n SITOP
Modular 5A and 10A feature extra wide input voltage
range for uses on either 1-phase or 3-phase networks in
one unit
n SITOP
Modular PSU100M 24V/20A features integrated relay
contact, DC input voltage range, and high efficiency of 93%
n All
units feature power boost of 3x rated current for 25ms
n Load
sharing functionality makes this the ideal product for
use with power security add-ons (e.g. Redundancy
Modules)
Selection and ordering data
1)
Output
Voltage
(V DC)
Output
Current
(A)
Power Rated
(W)
Input
Voltage
24
5
120
24
10
24
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
85..264 VAC/
70x125x125
176..550 VAC
(manual switch)
-25°C…+70°C
87%
Constant
Current or
Latching
Shutdown
CE, cULus,
GL, ABS,
ATEX, Class
I Div 2, SEMI
F471)
6EP1333-3BA00
240
85..264 VAC/
90x125x125
176..550 VAC
(manual switch)
-25°C…+70°C
87%
Constant
Current or
Latching
Shutdown
CE, cULus,
GL, ABS,
ATEX, Class
I Div 2, SEMI
F471)
6EP1334-3BA00
20
480
85..275 VAC
88..350 VDC
-25°C…+70°C
93%
Constant
Current or
Latching
Shutdown
CE, cULus,
GL, ABS,
ATEX, Class I
Div 2
6EP1336-3BA10
24
20
480
85..132/ VAC
160x125x125
176…264 VAC
(manual switch)
0°C…+70°C
89%
Constant
Current or
Latching
Shutdown
CE, cULus,
GL, ABS,
ATEX
6EP1336-3BA00
24
40
960
85..132/ VAC
240x125x125
176…264 VAC
(manual switch)
0°C…+70°C
88%
Constant
Current or
Latching
Shutdown
CE, cULus,
ATEX
6EP1337-3BA00
90x125x125
At input voltage 208 to 230 VAC
Siemens Industry, Inc.
Industrial Controls Catalog
15/17
SITOP Power Supplies
Standard, Three Phase Switched-Mode Technology
SITOP Smart:
The powerful standard power supply
Overview
SITOP smart is the optimum power supply for many applications in 24 VDC. They offer compact dimensions, a strong
performance, and a favorable price. Despite its compactness it
offers an outstanding overload withstand capability.
Thanks to the extra power feature with 1.5 times the rated
current for 5 seconds, even large loads can be switched on
without any problems. With a continuous rated power of 120
percent, the slim power supply units are among the most reliable of their kind. Numerous certifications facilitate the universal and global use and permit their use in hazardous areas.
n Output
voltages in 24 VDC
n All
units feature 120% continuous overload at
45°C or less.
n All
units feature extra power of 1.5x rated current
for 5s/min
n All
units with built-in signaling contact for
“24 V DC ok”
n Robust
metal housing and metal DIN rail clip
n Expandable
with power security add-on components
Selection and ordering data
Output
Voltage
(V DC)
Output
Current
(A)
Power Rated
(W)
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
24
10
240
340…550 V 3 AC 90x145x150
0°C…+70°C
91%
Auto
Restart
CE, cULus,
ATEX, Class I
Div 2, GL
6EP1434-2BA10
24
20
480
340…550 V 3 AC 90x145x150
0°C…+70°C
91%
Auto
Restart
CE, cULus,
ATEX, Class I
Div 2, GL
6EP1436-2BA10
24
40
960
340…550 V 3 AC 150x145x150
0°C…+70°C
91.5%
Auto
Restart
CE, cULus,
ATEX, Class I
Div 2, GL
6EP1437-2BA20
Smart Family
15/18
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
Standard, Three Phase Switched-Mode Technology
SITOP Modular: The technology
power supply for demanding solutions
Overview
SITOP modular fulfills the highest functionality
requirements,e.g. for use in complex plants and machines.
The wide-range input allows a connection to almost any
electrical power system worldwide and ensures a high degree
of safety even if there are large voltage fluctuations.
The power boost provides up to three times the rated current
for brief periods. In the event of an overload, you have two
options: Constant current with automatic restart or latching
shutdown. The newly innovated PSU300M features a DC input
voltages and an integrated signaling contact.
n SITOP
Modular 5A and 10A feature extra wide input
voltage range for uses on either 1-phase or 3-phase
networks in one unit
n Output
voltages in 24 VDC and 48 VDC
n SITOP
Modular PSU300M 24V/20A, 24V/40A, 48V/10A
features integrated relay contact, extra power of 1.5x
rated current, and high efficiency of 93%
n All
units feature power boost of 3x rated current for 25ms
n Robust
metal housing and metal DIN Rail clip
n Load
sharing functionality makes this the ideal product
for use with power security add-ons (e.g. Redundancy
Modules)
Selection and ordering data
Output
Voltage
(V DC)
Output
Current
(A)
Power Rated
(W)
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
24
5
120
85..264 VAC/
176..550 VAC
(manual switch)
70x125x125
-25°C…+70°C
87%
Contant
Current or
latching
shutdown
CE, cULus,
GL, ABS,
ATEX, Class
I Div 2, SEMI
F471)
6EP1333-3BA00
24
10
240
85..264 VAC/
176..550 VAC
(manual switch)
90x125x125
-25°C…+70°C
87%
Contant
Current or
latching
shutdown
CE, cULus,
GL, ABS,
ATEX, Class
I Div 2, SEMI
F471)
6EP1334-3BA00
24
20
480
320…575 V 3 AC 70x125x125
-25°C…+70°C
93%
Contant
Current or
latching
shutdown
CE, cULus,
GL, ABS,
SEMI F47,
ATEX, Class I
Div 2
6EP1436-3BA10
48
10
480
320…575 V 3 AC 70x125x125
-10°C…+70°C
93%
Constant
Current or
Latching
Shutdown
CE, cULus,
GL, ABS,
ATEX, Class I
Div 2
6EP1456-3BA00
24
20
480
340...550 V 3 AC 160x125x125
0°C…+70°C
90%
Auto
Restart
CE, UL, CSA,
GL, ABS,
SEMI F47
6EP1436-3BA00
24
40
960
320...550 V 3 AC 150x125x150
-25°C…+70°C
93%
Auto
Restart
CE, UL, CSA,
GL, ABS,
SEMI F47,
ATEX, Class I
Div 2
6EP1437-3BA10
24
40
960
340…550 V 3 AC 240x125x125
0°C…+70°C
90%
Auto
Restart
CE, UL, CSA,
SEMI F47
6EP1437-3BA00
48
20
960
340…550 V 3 AC 240x125x125
0°C…+60°C
90%
Auto
Restart
CE, UL, CSA,
GL, ABS
6EP1457-3BA00
Modular Family
1)
At input voltage 208 to 230 VAC
Siemens Industry, Inc.
Industrial Controls Catalog
15/19
SITOP Power Supplies
• Revised •
08/01/14
Three Phase Power Supplies in Special Design
SITOP in Special Design:
Well prepared for special tasks and conditions
Overview
SITOP PSU300E: three-phase power supply with low output
and removable plug-in terminals.
n Sturdy
metal enclosure is only 42 mm wide and does not
require mounting distances on the sides to other devices
n Low
heat generation due to the high efficiency level of 90%
n The
wide input range of 320 V to 550 V 3AC allows for
mains buffering times of 50 ms, thus enabling use in
unstable three-phase systems
n Removable
plug-in terminals simplify the connection to
AC and DC
SITOP PSU300B: three-phase power supply optimized for
battery charging
n Available
n High
in output in 12 VDC and 24 VDC output voltages
efficiencies up to 93%
n Slim,
compact design without the need for lateral mounting
clearance
n Constant
current characteristic makes them optimal for
battery charging
n Wide
range input for voltages 3AC 320 to 575 V allow for
use in traditional three-phase applications
n An
LED and an integrated “DC 24 V OK” signaling contact
indicate the status of the output voltage
n Output
voltage can be adjusted from 24 V to 29 V
Selection and ordering data
Output
Voltage
(V DC)
Output
Current
(A)
Power Rated
(W)
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency Short
Circuit
Protection
Certificates
Approvals
Order No.
5
120
320…575 V 3 AC
42x125x125
0°C…+60°C
90%
Auto
Restart
6EP1433-0AA00
CE, cULus,
ATEX, cCSAus
Class I Div
2, GL
12
20
240
320…575 V 3 AC
70x125x125
-25°C…+60°C
86%
Contant
Current or
latching
shutdown
CE, cULus
6EP1424-3BA00
24
17
408
320…575 V 3 AC
70x125x125
-25°C…+70°C
93%
Contant
Current or
latching
shutdown
CE (cULus
pending)
6EP1436-3BA20
24
30
720
320…575 V 3 AC
150x125x125
-25°C…+70°C
93%
Contant
Current or
latching
shutdown
CE, cULus
6EP1437-3BA20
PSU300E Family
24
PSU300B Family
15/20
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
Single Phase Power Supplies in Special Design
SITOP in Special Design:
Well prepared for special tasks and conditions
Overview
SIMATIC Design:
Other Types:
n The original SIMATIC power supplies merge perfectly into the PLC
n DC/DC Converter: features a narrow DIN rail housing and
network in terms of their design and functionality.
needs a 24 V DC input voltage - it can also be used in conjuction with a DC UPS to provided an uninterruptible 12 VDC.
n SIMATIC S7-200: this flat power supply unit is also used for low
installation depths
n Dual: the electronics power supply for the control cabinet; the
industry-standard rail mounted device has two 15 VDC outputs
for loads that may require ±15 V DC
n SIMATIC S7-1200: the compact PM1207 power module supplies
power to the S7-1200 micro PLC.
n SIMATIC S7-300: these innovative power supplies feature automatic
n Flexi: limitless diversity thanks to variable output. Allows flexible
switchover on 120/230 VAC networks and a slimmer design than older
versions of the PS307
n SIMATIC S7-1500: the compact PM1507 power modules supply
power to the newly released, SIMATIC S7-1500 PLC
adjustment between 3 and 52 VDC so just one standard power
supply can be used for different voltages
n PSU400M: compact DC/DC converter with wide DC input
voltage range from 200 to 900 VDC. Ideally suited for use with
frequency-controlled drive systems
Selection and ordering data
Output
Voltage
(V DC)
Output
Current
(A)
Power Rated
(W)
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Efficiency Certificates
Temperature
Approvals
Order No.
SIMATIC S7-200
24
3.5
84
85..132 V AC/
176..264 VAC
(auto switch)
160x80x62
0°C…+60°C 84%
CE, cULus
6EP1332-1SH31
SIMATIC S7-1200
24
2.5
60
85..132 V AC/
176..264 VAC
(auto switch)
70x100x75
0°C…+60°C 83%
CE, cULus,
ATEX, cCSAus
Class I Div 2,
GL, ABS
6EP1332-1SH71
SIMATIC S7-300
24
2
48
85..132 V AC/
170..264 VAC
(auto switch)
40x125x120
0°C…+60°C 84%
CE, cULus,
ATEX, cULus
Class I Div 2,
GL, ABS
6ES7307-1BA010AA0
24
5
120
85..132 V AC/
170..264 VAC
(auto switch)
60x125x120
0°C…+60°C 86%
CE, cULus,
ATEX, cULus
Class I Div 2,
GL, ABS
6ES7307-1EA010AA0
24
10
240
85..132 V AC/
170..264 VAC
(auto switch)
80x125x120
0°C…+60°C 90%
CE, cULus,
ATEX, cULus
Class I Div 2,
GL, ABS
6ES7307-1KA020AA0
SIMATIC S7-1500
24
3
72
85..132 V AC/
176..264 VAC
(auto switch)
50x141x135
0°C…+60°C 87%
CE, cULus, FM,
ATEX, pending:
cULus Class I
Div 2, GL, ABS
6EP1332-4BA00
SIMATIC S7-1500
24
8
192
85..132 V AC/
176..264 VAC
(auto switch)
75x147x135
0°C…+60°C 91%
CE, cULus, FM,
ATEX, pending:
cULus Class I
Div 2, GL, ABS
6EP1333-4BA00
DC/DC
12
2.5
30
24 VDC
32.5x125x125 0°C…+60°C 80%
(18.5..30.2 V DC)
CE, cULus
6EP1621-2BA00
Dual
2x15
3.5
105
93..264 V AC
75x125x125
0°C…+60°C 80%
CE
6EP1353-0AA00
Flexi
3.52
10
max
120W
85..132 V AC/
170…264 V AC
75x125x125
0°C…+60°C 84%
CE, cULus
6EP1353-2BA00
PSU400M
24
20
480
200…900 V DC
(start-up from
400 V DC)
90x125x125
-25°C…
+70°C
CE, cULus, GL
(ABS pending)
6EP1536-3AA00
SIMATIC Design
Other Types
Siemens Industry, Inc.
Industrial Controls Catalog
95%
15/21
SITOP Power Supplies
Power Security Add-On Modules
SITOP Expansion Modules
Overview
A power supply unit on its own cannot guarantee a fault-free
24 V DC supply. Power failures, extreme variations in the mains
voltage, or a faulty load can bring plant operation to a standstill
and cause high costs. The expansion modules offer everything
from extensive protection against interference on the primary
and secondary side right up to complete all-round protection.
n Signaling
Module: Module for snapping onto the side of
the basic unit SITOP modular (6EP1x3x-3BA00, 6EP14573BA00); automatic contacting, with floating signaling contacts
for “Output voltage o.k.” and “Operating readiness o.k.”; with
signal input for switching the basic unit ON/OFF remotely.
n Buffer
Module: Module for mains buffering; parallel connection at output of 24 V basic units (6EP1x3x-3BAxx);
buffering time 200 ms at 40 A to 1.6 s at 5 A load current;
multiplication possible through parallel connection; maximum buffer time 10 s.
n Redundancy
Module: Module for redundancy mode.
Floating relay contact and green LED for signaling “Infeed 1
and 2 o.k.”, switching threshold adjustable between 20 to
25 V DC.
n Selectivity/Select
Diagnosis Module: Module for distributing the 24 V DC supply over up to four load circuits and
their monitoring for overload; selective shutdown of faulty
Selection and ordering data
Output Output
Voltage Current
(V DC) (A)
Power Rated
(W)
Input
Voltage
Dimensions Ambient
Efficiency Certificates
(WxHxD)
Temperature
Approvals
mm
Notes
Order No.
SITOP Expansion Modules
Signaling
N/A
N/A
84
Contact
25x125x125 0…+60°C
Rating:
240 V AC/ 6 A
N/A
CE, UL,
CSA
6EP1961-3BA10
Buffer
24
40
60
24 V DC
70x125x125 0…+60°C
(24..28.8 VDC)
N/A
CE, UL,
CSA, GL,
ABS, ATEX,
Class I Div 2
6EP1961-3BA01
Redundancy
24
10*
48
24 V DC
(19..29 VDC)
30x80x100
-20°…+60°C 97%
CE, cULus
Decouple of 2
5 A or one 10A
power supply
per redundancy
module
6EP1964-2BA00
24
3.5*
120
24 V DC
(19..29 VDC)
30x80x100
-20°…+60°C 95%
CE, cULus,
NEC Class 2
Decoupling and
limitation of the
output to Class
2 limit (100 W) of
2 power supplies
5 to 40.
6EP1962-2BA00
Redundancy
24
40*
240
24 V DC
70x125x125 0…+60°C
(24..28.8 VDC)
97%
CE, cULus,
cCSAus
Class I Div 2,
ATEX, GL,
ABS
Decouple of
6EP1961-3BA21
2 5 to 20 A or
one 40A power
supply per redundancy module
Selectivity
24
4 x 3A
72
(0.5A…3A)
24 V DC
(22...30 VDC)
72x80x72
0…+60°C
97%
CE, UL,
cURus,
cCSAus
Class I Div 2,
ATEX, GL
(ABS pending)
6EP1961-2BA11
6EP1961-2BA31**
24
4 x 10 A
192
(3A...10 A)
24 V DC
(22...30 VDC)
72x80x72
0…+60°C
97%
CE, UL,
cURus,
cCSAus
Class I Div 2,
ATEX, GL
(ABS pending)
Individual load
circuits can be
switched on
sequentially.
Status indication
via 3-color LED
per channel;
remote reset
with 24 V signal
and reset via
pushbutton
per channel;
common signaling contact
12
4 x 10 A
30
(2A...10 A)
24 V DC
(22...30 VDC)
72x90x90
0…+60°C
97%
CE, UL,
cURus,
cCSAus
Class I Div 2,
ATEX
Status indication
via 2-color LED
per channel;
common reset
via pushbutton,
plug-in fuse
per channel;
status indication
via 3-color LED
per channel;
common signaling contact.
6EP1961-2BA00
Select Diagnosis
6EP1961-2BA21
6EP1961-2BA41**
*Total Current
**With single channel signaling for individual channel specific analyses
15/22
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
DC Uninterruptible Power Supplies
DC UPS with Battery Back-up
Overview
Reliable 24 VDC at all times, even when power fails
Compact DC UPS modules ensure continued operation, even
over a period of hours, depending on battery capacity and
power requirements. The sophisticated battery management
ensures optimal charging of the batteries – and means that the
unit is always reliably available for buffering. The active battery
test function even checks the age of the battery. This means
that precautionary replacement of the battery isn’t necessary
–a substantial cost saving for your plant. All relevant messages
are output via floating contacts,or optionally via a serial
interface or USB port.
n DC
UPS Modules 6A, 15A, and 40 A
n Maintenance-free
battery modules up to 12 Ah
n Monitoring
of operational readiness, battery feeder, aging,
and charging status
n Extended
life of loads and batteries due to built-in intelligent battery management
n Uninterrupted
transition into buffer mode
Selection and ordering data
Output Output
Voltage Current
(V DC) (A)
Storage
Rated
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency ShortCircuit
Protection
Certificates
Approvals
Order No.
24
6
Depends 24 V DC
on (22…29 V DC)
battery
50x125x125
-25°…+60°C 94%
Auto CE, cULus,
Restart ATEX; Class I
Div 2, GL, ABS
6EP1931-2DC21
6EP1931-2DC31*
6EP1931-2DC42**
24
15
Depends 24 V DC
on (22…29 V DC)
battery
50x125x125
-25°…+60°C 96%
Auto CE, cULus,
Restart ATEX; Class I
Div 2, GL, ABS
6EP1931-2EC21
6EP1931-2EC31*
6EP1931-2EC42**
DC UPS Module 24
40
Depends 24 V DC
on (22…29 V DC)
battery
102x125x125 -25°…+60°C 97%
Auto CE, cULus,
Restart ATEX; cCSAus
Class I Div 2,
GL, ABS
6EP1931-2FC21
6EP1931-2FC42**
DC UPS Battery 24
6
1.2 Ah EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
96x106x108
-10°…+50°C N/A
Installed CE, cULus,
Fuse ATEX; Class I
7.5 A/ 32 V Div 2, GL, ABS
6EP1935-6MC01
DC UPS Battery 24
15
3.2 Ah EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
190x151x82
-10°…+50°C N/A
Installed CE, cULus,
Fuse ATEX; Class I
15 A/ 32 V Div 2, GL, ABS
6EP1935-6MD11
DC UPS Battery 24
30
7 Ah EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
186x168x121 -10°…+50°C N/A
Installed CE, cULus,
Fuse ATEX; Class I
30 A/ 32 V Div 2, GL, ABS
6EP1935-6EM21
DC UPS Battery 24
30
12 Ah EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
253x168x121 -10°…+50°C N/A
Installed CE, cULus,
Fuse ATEX; Class I
30 A/ 32 V Div 2, GL, ABS
6EP1935-6MF01
DC UPS Battery 24
15
2.5 Ah EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
265x151x91
Installed CE, cULus,
Fuse ATEX; Class I
15 A/ 32 V Div 2, GL, ABS
6EP1935-6MD31
DC UPS Module
EOC = End of Charge
Siemens Industry, Inc.
Industrial Controls Catalog
-40°…+60°C N/A
*With Serial Interface
**With USB Interface
15/23
SITOP Power Supplies
DC Uninterruptible Power Supplies
DC UPS with Battery and Capacitor Back-up
Overview
UPS 1600/1100 System with Ethernet/PROFINET Interface
New UPS1600 now offers all of the same functionality as older
DC UPS system with even more possibilities for diagnostics and
system integration. The UPS 1600 offers comprehensive functions, open communication via USB or Ethernet/PROFINET, and
remote monitoring with integrated web server functionality. With
conjunction with the UPS1100 battery modules, the system automatically detects the type of battery and charges it at the optimal,
temperature-controlled charging characteristics.
n DC UPS 1600 Modules in 24VDC/ 10 A or 20 A
n DC UPS 1100 Modules up to 7 Ah
n Increased diagnostics with Ethernet/PROFINET interface and
integrated webserver
24 V DC UPS with maintenance-free capacitor back-up
These highly-capacitive double-layer capacitors store sufficient
energy to shut down PC-based systems safely. The capacitors
have an extremely long life even at high ambient temperatures.
No maintenance or replacement of the energy buffer is required,
which means that the DC UPS pays for itself within a short time.
And because the capacitors do not emit any gas, no ventilation of the control cabinet is required. The buffering time can be
extended by adding expansion modules .
n SITOP UPS500S 15A up to 20 kWS with expansion modules
n Capacitors eliminate replacement of batteries
n Long life even at high ambient temperatures
Selection and ordering data
Output Output Storage
Voltage Current
(V DC) (A)
Rated
Input
Voltage
Dimensions
(WxHxD)
mm
Ambient
Temperature
Efficiency ShortCircuit
Protection
Certificates
Approvals
Order No.
24
10
Depends 24 VDC
on
(21…29 VDC)
battery
50x125x125
-25°…+70°C
97.3%
Auto
Restart
CE, cULus,
ATEX; Class
I Div 2, GL,
ABS
6EP4134-3AB00-0AY0
6EP4134-3AB00-1AY0**
6EP4134-3AB00-2AY0***
24
20
Depends 24 VDC
on
(21…29 VDC)
battery
50x125x125
-25°…+70°C
97.5%
Auto
Restart
CE, cULus,
ATEX; Class
I Div 2, GL,
ABS
6EP4136-3AB00-0AY0
6EP4136-3AB00-1AY0**
6EP4136-3AB00-2AY0***
DC UPS
1100 Battery1)
24
10
1.2 Ah
EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
89x130x107
-10°…+50°C
N/A
CE, cULus,
Installed
ATEX; Class
Fuse
15 A/32 V I Div 2, GL,
ABS
6EP4131-0GB00-0AY0
DC UPS
1100 Battery1)
24
20
3.2 Ah
EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
190x169x79.5
-10°…+50°C
N/A
CE, cULus,
Installed
ATEX; Class
Fuse
25 A/32 V I Div 2, GL,
ABS
6EP4133-0GB00-0AY0
DC UPS
1100 Battery1)
24
40
7 Ah
EOC (> +20°C)
26.4..27.3 VDC
EOC (<+20°C)
27.3..29.0 VDC)
186x186x110.5 -10°…+50°C
N/A
Installed
Fuse
2 x 25A
A/32 V
CE, cULus,
ATEX; Class
I Div 2, GL,
ABS
6EP4134-0GB00-0AY0
DC UPS
Capacitor
Module
24
15
2. 5
kWs
24 VDC
(22..29 VDC)
infeed from 24
VDC SITOP
120x125x125
0…+60°C
97.5%
Auto
Restart
CE, cULus,
ATEX; Class
I Div 2, GL,
ABS
6EP1933-2EC41
24
15
5 kWs
24 VDC
(22..29 VDC)
infeed from 24
VDC SITOP
120x125x125
0…+60°C
97.5%
Auto
Restart
CE, cULus,
ATEX; Class
I Div 2, GL,
ABS
6EP1933-2EC51
N/A
N/A
5 kWs
70x125x125
Infeed from
2.5 kWs or
5 kWs basic unit
0…+60°C
N/A
Auto
Restart
CE, cULus,
ATEX; Class
I Div 2, GL,
ABS
6EP1935-5PG01
DC UPS
1600 Module1)
DC UPS
Capacitor
Expansion
EOC = End of Charge
15/24
1)
To be released Q1 2014
**With USB Interface
***With Ethernet/PROFINET Interface
Siemens Industry, Inc.
Industrial Controls Catalog
SITOP Power Supplies
DC Uninterruptible Power Supplies
Back-Up Times
Overview
6EP19356MC01
6EP19356MD11
6EP19356EM21
6EP19356MF01
6EP19356MD31
1.2 Ah
3.2 Ah
7 Ah
12 Ah
2.5 Ah
6EP41310GB00-0AY0
6EP41330GB00-0AY0
1.2 Ah
3.2 Ah
6EP41340GB00-0AY0
7 Ah
1A
34.5 min
2.6 h
5.4 h
9h
2h
24.5 min
2.6 h
5.4 h
2A
15.5 min
1h
2.6 h
4.6 h
1h
15.5 min
1h
2.6 h
3A
9 min
39.3 min
1.6 h
2.9 h
37.5 min
9 min
39.3 min
1.6 h
4A
6.5 min
27.1 min
1.2 h
2.2 h
27 min
6.5 min
27.1 min
1.2 h
6A
3.5 min
17.5 min
41 min
1.2 h
17.6 min
3.5 min
17.5 min
41 min
8A
—
12.1 min
28.6 min
53.3 min
12.5 min
2 min
12.1 min
28.6 min
10A
—
9 min
21.8 min
43.5 min
8.8 min
1 min
9 min
21.8 min
12A
—
—
17.3 min
33.3 min
6.8 min
—
7 min
17.3 min
14A
—
—
15.1 min
27.5 min
5.1 min
—
5 min
15.1 min
16A
—
—
12.5 min
23.8 min
4.3 min
—
4 min
12.5 min
9.1 min
20A
—
—
9.1 min
20.1 min
—
—
1 min
25A
—
—
—
12.6 min
—
—
—
—
30A
—
—
—
9.1 min
—
—
—
—
6EP19332EC41
6EP19332EC51
2.5 kWs
5 kWs
2.5 kWs
5 kWs
2.5 kWs
5 kWs
2.5 kWs
5 kWs
—
—
1 x 5 kWs
1 x 5 kWs
2 x 5 kWs
2 x 5 kWs
3 x 5 kWs
3 x 5 kWs
2.5 kWs
5 kWs
7.5 kWs
10 kWs
12.5 kWs
15 kWs
17.5 kWs
20 kWs
0.5
134 s
236 s
390 s
478 s
632 s
748 s
851 s
1007 s
0.8
90 s
167 s
266 s
346 s
440 s
527 s
580 s
706 s
1A
75 s
138 s
219 s
296 s
365 s
414 s
490 s
572 s
2A
38 s
76 s
122 s
156 s
203 s
230 s
265 s
306 s
3A
26 s
52 s
82 s
106 s
136 s
159 s
186 s
213 s
4A
19 s
39 s
61 s
81 s
101 s
120 s
139 s
160 s
5A
15 s
31 s
49 s
65 s
81 s
95 s
111 s
130 s
6A
12 s
26 s
40 s
55 s
67 s
80 s
94 s
106 s
7A
10 s
21 s
34 s
47 s
58 s
69 s
81 s
82 s
8A
8s
18 s
29 s
40 s
50 s
59 s
69 s
79 s
10
6s
15 s
23 s
32 s
39 s
47 s
54 s
62 s
12
4s
12 s
19 s
26 s
32 s
38 s
44 s
52 s
15
3s
9s
14 s
20 s
25 s
30 s
35 s
40 s
2A
54 s
120 s
158 s
223 s
263 s
318 s
355 s
417 s
1A
110 s
205 s
311 s
425 s
503 s
625 s
695 s
816 s
Basic Units
Expansion
modules
Combined
Energy Storage
at load current
Charging Times
at load current
6EP1935-5PG01
Please use the SITOP Selection Tool for more detailed back-up time information
www.siemens.com/sitop-selection-tool
Siemens Industry, Inc.
Industrial Controls Catalog
15/25
SIMATIC Net
Ethernet Infrastructure Components
Scalance Unmanaged Switches
Ordering Data
Order No.
XB005 (5 RJ45 ports)
6GK5005-0GA00-1AB2
XB008 (8 RJ45 ports)
6GK5008-0BA00-1AB2
Scalance Unmanaged Industrial Ethernet Switches
The SCALANCE unmanaged Industrial Ethernet switch with up to
eight RJ45 10/100 Mbit/s ports. These products provide a costoptimized solution for the design of small star or line structures with
switching functionality in isolated machines or plant sections. These
SCALANCE switches are designed for space saving installation on
standard DIN rail and include a removable terminal block for the 24
VDC power connection.
Scalance Managed Switches
Ordering Data
Order No.
XB208 (8 RJ45 ports)
6GK5208-0BA00-2AA3
Scalance Managed Industrial Ethernet Switches
The SCALANCE managed Industrial Ethernet switch is offered with
on-site diagnostics via LEDs. The unit can be included in network
management systems via SNMP. SCALANCE X-208 switch has an
integrated redundant ring manager. The SCALANCE X-208 product
has a redundant voltage supply (2 x 24 V DC) and a fault-signaling
contact on the front of the housing. For diagnostics purposes the
unit can also be accessed via a Web Browser.
Ordering Data
Order No.
IE FC RJ45 Plug
90 deg - 1 unit
6GK19011BB202AA0
IE FC RJ45 Plug
90 deg - 10 units
6GK19011BB202AB0
IE FC RJ45 Plug
90 deg - 50 units
6GK19011BB202AE0
IE FC RJ45 Plug
180 deg - 1 unit
6GK19011BB102AA0
IE FC RJ45 Plug
180 deg - 10 unit
6GK19011BB102AB0
IE FC RJ45 Plug
180 deg - 50 unit
6GK19011BB102AE0
Industrial Ethernet FastConnect RJ45 Plugs
The compact and rugged design of the plug-in connectors allow the
FC RJ45 Plugs to be used in the industrial environment.
IE FC Stripping Tool
6GK19011GA00
IE FC Blade Cassettes ( 5pack)
6GK19011GB01
Industrial Ethernet FastConnect Stripping Tool
Preadjusted stripping tool for fast stripping of Industrial Ethernet
FC cables.
IE TP RJ45/RJ45 CAT 5e Cable - 0.5 m
6XV18502GE50
IE TP RJ45/RJ45 CAT 5e Cable - 1 m
6XV18502GH10
IE TP RJ45/RJ45 CAT 5e Cable - 2 m
6XV18502GH20
IE TP RJ45/RJ45 CAT 5e Cable - 6 m
6XV18502GH60
IE TP RJ45/RJ45 CAT 5e Cable - 10 m
6XV18502GN10
Industrial Ethernet Twisted Pair Cables
Premolded Cat5e (2x2) patch cables in pre-assembled lengths
from 0.5 - 10m.
15/26
Siemens Industry, Inc.
Industrial Controls Catalog
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement