BCB-60 Pedal Case | Owner's manual | Boss BCB60 Pedal Case Manual

Add to my manuals
2 Pages

advertisement

BCB-60 Pedal Case | Owner's manual | Boss BCB60 Pedal Case Manual | Manualzz

Owner’s Manual

Thank you, and congratulations on your choice of the BOSS BCB-60 Pedal Board.

Main Features

Before using this unit, carefully read the sections entitled: “USING THE UNIT

SAFELY” and “IMPORTANT NOTES.”

New Way to Secure Effects Pedals Works with All Types of Pedals,

Lets You Arrange Them However You Like

These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety.

The manual should be saved and kept on hand as a convenient reference.

Copyright © 2003 BOSS CORPORATION

Now you can set up compact pedals as well as twin pedals simply and easily with holding pads; the pedal shapes are described in dotted lines right on the pads. These pads allow you to pull off and rearrange your pedals in seconds, without the need for double-sided tape. In addition, the BCB-60 comes with an unshaped holding pad blank, which you can cut to any desired shape, allowing you to use a wide variety of pedals.

All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION.

Power Supply Function

The BCB-60 comes with a high-capacity 1000-mA AC adaptor with five times the capacity of PSA-series adaptors, providing ample power for all of the effects pedals connected to the BCB-60.

Super-Tough Blow-Molded Body

.........................................................................................................................................................................................................................................................................................................................................................................................................................................................

Panel Descriptions

5

11

Ground

Terminal

6

1 1 2

3

AC Adaptor

4 7

12

8

9

LL Cable (5-1/8”)

LL Cable (15-3/4”)

Spare Holding Pad

How to Connect

* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

* Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

When powering up: Turn on the power to your guitar amp last .

When powering down: Turn off the power to your guitar amp first .

1.

Connect your amps and guitar as shown in the figure.

To the Power Outlet

Example of Connection Setup Incorporating a Wah Pedal

Remove the right panel, then use a Phillips head screwdriver to remove the two screws securing the wire holder under the right panel.

Thumbscrews

Screws

Attach the wah pedal as shown in the figure. Set the wah pedal’s rubber feet in the depressions.

2.

Remove the thumbscrews, and remove the left and right panels.

Thumbscrews

3.

Use the LL cables to connect your effects pedals and tuner.

10

1.

Free Pockets

Use these for your AC adaptor, tuner, and other small items.

2.

INPUT

Connect your guitar cable here.

3.

SEND

Connect the input of the first effects pedal to be connected here.

Use the included LL cable for this connection.

4.

RETURN A/B

Connect the input of the effects pedal

5.

OUTPUT A/B

Connect your guitar amp here.

(Signals input to RETURN A are output from OUTPUT A; signals input to RETURN

B are output from OUTPUT B.)

* The BCB-60 includes the two return and output pairs, A and B, for compatibility with stereo output effects. Use either A or B if your effects pedal's output is mono.

6.

PSB-1U/PSC IN

Connect the included PSB-1U ( or PSC series) here.

* Do not connect the PSB-1U ( or PSC series) directly to the effects pedals.

7.

DC OUT

This is the power supply connector for your effects pedals.

Accepts connection of the included 8pin parallel DC cable.

You can connect only effects pedals compatible with BOSS PSA and ACA series.

* When using effects pedals compatible with the BOSS ACA series, be sure to route the guitar signal via the BCB-60’s send and returns. Insufficient voltage is supplied to the effects pedals unless the signal is routed through the send and returns.

10

8.

Wire Holder

The LL and 8pin parallel DC cables are secured in these spaces.

On both sides, the recessed spaces feature suitably sized gaps, making it easy to pull out just the cable you want.

9.

Holding Pads

These pads are used to keep your effects firmly in place.

These pads can be attached and removed easily with the attachment screws at the pads’ four corners.

Setting up BOSS compact pedals and twin pedals is easy—just cut along the dotted lines and remove the excess material.

To accommodate an effects pedal that has an unusual shape, use the provided unshaped pad blank, and cut it to match the shape of the pedal. This allows you to get a perfectly formed pad, even for a differently shaped pedal.

* Exercise care when using cutting tools so as to avoid injury as you shape the holding pads.

10. Left Panel/Right Panel

These plates are used to hide the cables in the wire holder.

Secure the panels to the wire holder with the thumbscrews.

11. AC Adaptor

This is a specialized power adaptor for the BCB-60.

Connect the L-shaped DC plug to PSB-1U/PSC IN.

12. 8Pin Parallel DC Cable

Connect the L-shaped DC plug to DC OUT and other plugs to any effects pedal you want to connect.

Always put the supplied tubes on the plugs and keep them in the wire holder when not in use.

4.

Connect the effects pedals with the 8pin parallel DC cable.

Connect the L-shaped plug to DC OUT.

5.

Attach the left and right panels using the thumbscrews removed in step 2.

Examples of Compact Pedal and Twin Pedal Connections

Cut the holding pad to the shape of the pedal to be attached.

* Exercise care when using cutting tools so as to avoid injury as you shape the holding pads.

Main Specifications

Connectors:

Power Supply:

Dimensions:

Weight:

Accessories:

INPUT Jack (1/4” phone type)

SEND Jack (1/4” phone type)

RETURN A/B Jacks (1/4” phone type)

OUTPUT A/B Jacks (1/4” phone type)

PSB-1U/PSC IN Jack, DC OUT Jack

DC 9 V: AC Adaptor (PSB-1U or PSC series)

670 (W) x 370 (D) x 100 (H) mm

26-7/16 (W) x 14-5/8 (D) x 3-15/16 inches

3.8 kg / 8 lbs 7 oz

AC Adaptor (PSB-1U or PSC series) 9 V, 1000 mA x 1

8-pin Parallel DC Cable x 1

LL Cable (1/4” L-shaped ↔ 1/4” L-shaped; 5-1/8”) x 5

LL Cable (1/4” L-shaped ↔ 1/4” L-shaped; 15-3/4”) x 3

Spare Holding Pad x 1

Owner’s Manual (This sheet)

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.

001

• Before using this unit, make sure to read the instructions below, and the

Owner’s Manual.

.......................................................................................................

002c

• Do not open (or modify in any way) the unit or its AC adaptor.

.......................................................................................................

003

• Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest

Roland Service Center, or an authorized Roland distributor, as listed on the “Information.”

.......................................................................................................

004

• Never use or store the unit in places that are:

• Subject to temperature extremes

(e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are

• Damp (e.g., baths, washrooms, on wet floors); or are

• Humid; or are

• Exposed to rain; or are

• Dusty; or are

• Subject to high levels of vibration.

.......................................................................................................

007

• Make sure you always have the unit placed so it is level and sure to remain stable. Never place it on stands that could wobble, or on inclined surfaces.

.......................................................................................................

008c

• Be sure to use only the AC adaptor supplied with the unit. Also, make sure the line voltage at the installation matches the input voltage specified on the AC adaptor’s body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock.

.......................................................................................................

008d

• When using a DC 9 V Out jack, make sure that the total current consumption of this unit and other effects being supplied does not exceed 1000 mA.

.......................................................................................................

009

• Do not excessively twist or bend the power cord, nor place heavy objects on it. Doing so can damage the cord, producing severed elements and short circuits. Damaged cords are fire and shock hazards!

.......................................................................................................

Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.

Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly.

* Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets.

010

• This unit, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should immediately stop using the unit, and consult an audiologist.

.......................................................................................................

011

• Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit.

.......................................................................................................

012c

• Immediately turn the power off, remove the AC adaptor from the outlet, and request servicing by your retailer, the nearest Roland Service

Center, or an authorized Roland distributor, as listed on the “Information” page when:

• The AC adaptor or the power-supply cord has been damaged; or

• If smoke or unusual odor occurs

• Objects have fallen into, or liquid has been spilled onto the unit; or

• The unit has been exposed to rain (or otherwise has become wet); or

• The unit does not appear to operate normally or exhibits a marked change in performance.

.......................................................................................................

013

• In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit.

.......................................................................................................

014

• Protect the unit from strong impact.

(Do not drop it!)

.......................................................................................................

015

• Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cords—the total power used by all devices you have connected to the extension cord’s outlet must never exceed the power rating (watts/ amperes) for the extension cord.

Excessive loads can cause the insulation on the cord to heat up and eventually melt through.

.......................................................................................................

016

• Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page.

.......................................................................................................

The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.

The

symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet. located so their location or position does not interfere with their proper ventilation.

........................................................................................................

102d

• Always grasp only the output plug or the body of the AC adaptor when plugging into, or unplugging from, this unit or an outlet.

........................................................................................................

unplug the AC adaptor and clean it by using a dry cloth to wipe all dust and other accumulations away from its prongs. Also, disconnect the power plug from the power outlet whenever the unit is to remain unused for an extended period of time. Any accumulation of dust between the power plug and the power outlet can result in poor insulation and lead to fire.

........................................................................................................

104

• Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children.

........................................................................................................

objects on the unit.

........................................................................................................

107d

• Never handle the AC adaptor body, or its plugs, with wet hands when plugging into, or unplugging from, an outlet or this unit.

........................................................................................................

AC adaptor and all cords coming from external devices.

........................................................................................................

109b

• Before cleaning the unit, turn off the power and unplug the AC adaptor from the outlet.

........................................................................................................

of lightning in your area, disconnect the AC adaptor from the outlet.

........................................................................................................

116

• Be careful when opening/closing the lid so you do not get your fingers pinched.

........................................................................................................

sure to put them in a safe place out of children’s reach, so there is no chance of them being swallowed accidentally.

........................................................................................................

IMPORTANT NOTES

291a

In addition to the items listed under “USING

THE UNIT SAFELY”, please read and observe the following:

Power Supply: Use of Batteries

301

• Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system).

302

• The AC adaptor will begin to generate heat after long hours of consecutive use. This is normal, and is not a cause for concern.

307

• Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.

Placement

352a

• This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.

352b

• Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.

354a

• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.

355b

• When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated.

Maintenance

401a

• For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, nonabrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.

402

• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Additional Precautions

553

• Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks and connectors.

Rough handling can lead to malfunctions.

556

• When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.

558b

• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels

(especially when it is late at night).

559a

• When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials.

562

• Use a cable from Roland to make the connection.

If using some other make of connection cable, please note the following precautions.

• Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.

927

• Depending on the circumstances of a particular setup, you may experience a discomforting sensation, or perceive that the surface feels gritty to the touch when you touch this device, microphones connected to it, or the metal portions of other objects, such as guitars. This is due to an infinitesimal electrical charge, which is absolutely harmless. However, if you are concerned about this, connect the ground terminal (see figure in “Panel Descriptions”) with an external ground. When the unit is grounded, a slight hum may occur, depending on the particulars of your installation. If you are unsure of the connection method, contact the nearest Roland

Service Center, or an authorized Roland distributor, as listed on the “Information” page.

Unsuitable places for connection

- Water pipes (may result in shock or electrocution)

- Gas pipes (may result in fire or explosion)

- Telephone-line ground or lightning rod (may be dangerous in the event of lightning)

For EU Countries

This product complies with the requirements of EMC Directive 2004/108/EC.

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.

This equipment requires shielded interface cables in order to meet FCC class B Limit.

For Canada

NOTICE

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

AVIS

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

For the U.K.

IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE:

BROWN:

NEUTRAL

LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

Information

When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.

Parsons Music Ltd.

8th Floor, Railway Plaza, 39

Chatham Road South, T.S.T,

Kowloon, HONG KONG

TEL: 2333 1863

INDIA

Rivera Digitec (India) Pvt. Ltd.

411, Nirman Kendra

Mahalaxmi Flats Compound

Off. Dr. Edwin Moses Road,

Mumbai-400011, INDIA

TEL: (022) 2493 9051

INDONESIA

PT Citra IntiRama

Jl. Cideng Timur No. 15J-15O

Jakarta Pusat

INDONESIA

TEL: (021) 6324170

KOREA

Cosmos Corporation

1461-9, Seocho-Dong,

Seocho Ku, Seoul, KOREA

TEL: (02) 3486-8855

MALAYSIA

Roland Asia Pacific Sdn. Bhd.

45-1, Block C2, Jalan PJU 1/39,

Dataran Prima, 47301 Petaling

Jaya, Selangor, MALAYSIA

TEL: (03) 7805-3263

VIET NAM

Suoi Nhac Company, Ltd

370 Cach Mang Thang Tam St.

Dist.3, Ho Chi Minh City,

VIET NAM

TEL: 9316540

AFRICA

EGYPT

Al Fanny Trading Office

9, EBN Hagar Al Askalany

Street,

ARD E1 Golf, Heliopolis,

Cairo 11341, EGYPT

TEL: (022)-418-5531

REUNION

Maison FO - YAM Marcel

25 Rue Jules Hermann,

Chaudron - BP79 97 491

Ste Clotilde Cedex,

REUNION ISLAND

TEL: (0262) 218-429

SOUTH AFRICA

T.O.M.S. Sound & Music

(Pty)Ltd.

2 ASTRON ROAD DENVER

JOHANNESBURG ZA 2195,

SOUTH AFRICA

TEL: (011)417 3400

Paul Bothner(PTY)Ltd.

Royal Cape Park, Unit 24

Londonderry Road, Ottery 7800

Cape Town, SOUTH AFRICA

TEL: (021) 799 4900

PHILIPPINES

G.A. Yupangco & Co. Inc.

339 Gil J. Puyat Avenue

Makati, Metro Manila 1200,

PHILIPPINES

TEL: (02) 899 9801

SINGAPORE

SWEE LEE MUSIC

COMPANY PTE. LTD.

150 Sims Drive,

SINGAPORE 387381

TEL: 6846-3676

TAIWAN

ROLAND TAIWAN

ENTERPRISE CO., LTD.

Room 5, 9fl. No. 112 Chung

Shan N.Road Sec.2, Taipei,

TAIWAN, R.O.C.

TEL: (02) 2561 3339

THAILAND

Theera Music Co. , Ltd.

100-108 Soi Verng

Nakornkasem, New

Road,Sumpantawongse,

Bangkok 10100 THAILAND

TEL: (02) 224-8821

AUSTRALIA/

NEW ZEALAND

ASIA

CHINA

Roland Shanghai Electronics

Co.,Ltd.

5F. No.1500 Pingliang Road

Shanghai 200090, CHINA

TEL: (021) 5580-0800

AUSTRALIA/

NEW ZEALAND

Roland Corporation

Australia Pty.,Ltd.

38 Campbell Avenue

Dee Why West. NSW 2099

AUSTRALIA

Roland Shanghai Electronics

Co.,Ltd.

(BEIJING OFFICE)

10F. No.18 3 Section Anhuaxili

Chaoyang District Beijing

100011 CHINA

TEL: (010) 6426-5050

HONG KONG

Tom Lee Music Co., Ltd.

Service Division

22-32 Pun Shan Street, Tsuen

Wan, New Territories,

HONG KONG

TEL: 2415 0911

For Australia

Tel: (02) 9982 8266

For New Zealand

Tel: (09) 3098 715

CENTRAL/LATIN

AMERICA

ARGENTINA

Instrumentos Musicales S.A.

Av.Santa Fe 2055

(1123) Buenos Aires

ARGENTINA

TEL: (011) 4508-2700

BARBADOS

A&B Music Supplies LTD

12 Webster Industrial Park

Wildey, St.Michael, Barbados

TEL: (246)430-1100

BRAZIL

Roland Brasil Ltda.

Rua San Jose, 780 Sala B

Parque Industrial San Jose

Cotia - Sao Paulo - SP, BRAZIL

TEL: (011) 4615 5666

CHILE

Comercial Fancy II S.A.

Rut.: 96.919.420-1

Nataniel Cox #739, 4th Floor

Santiago - Centro, CHILE

TEL: (02) 688-9540

COLOMBIA

Centro Musical Ltda.

Cra 43 B No 25 A 41 Bododega 9

Medellin, Colombia

TEL: (574)3812529

COSTA RICA

JUAN Bansbach Instrumentos

Musicales

Ave.1. Calle 11, Apartado

10237,

San Jose, COSTA RICA

TEL: 258-0211

Gigamusic SARL

10 Rte De La Folie

97200 Fort De France

Martinique F.W.I.

TEL: 596 596 715222

MEXICO

Casa Veerkamp, s.a. de c.v.

Av. Toluca No. 323, Col. Olivar de los Padres 01780 Mexico

D.F. MEXICO

TEL: (55) 5668-6699

NICARAGUA

Bansbach Instrumentos

Musicales Nicaragua

Altamira D'Este Calle Principal de la Farmacia 5ta.Avenida

1 Cuadra al Lago.#503

Managua, Nicaragua

TEL: (505)277-2557

PANAMA

SUPRO MUNDIAL, S.A.

Boulevard Andrews, Albrook,

Panama City, REP. DE

PANAMA

TEL: 315-0101

PARAGUAY

Distribuidora De

Instrumentos Musicales

J.E. Olear y ESQ. Manduvira

Asuncion PARAGUAY

TEL: (595) 21 492147

PERU

Audionet

Distribuciones Musicales SAC

Juan Fanning 530

Miraflores

Lima - Peru

TEL: (511) 4461388

TRINIDAD

AMR Ltd

Ground Floor

Maritime Plaza

Barataria Trinidad W.I.

TEL: (868) 638 6385

CURACAO

Zeelandia Music Center Inc.

Orionweg 30

Curacao, Netherland Antilles

TEL:(305)5926866

DOMINICAN REPUBLIC

Instrumentos Fernando Giraldez

Calle Proyecto Central No.3

Ens.La Esperilla

Santo Domingo,

Dominican Republic

TEL:(809) 683 0305

ECUADOR

Mas Musika

Rumichaca 822 y Zaruma

Guayaquil - Ecuador

TEL:(593-4)2302364

EL SALVADOR

OMNI MUSIC

75 Avenida Norte y Final

Alameda Juan Pablo II,

Edificio No.4010 San Salvador,

EL SALVADOR

TEL: 262-0788

GUATEMALA

Casa Instrumental

Calzada Roosevelt 34-01,zona 11

Ciudad de Guatemala

Guatemala

TEL:(502) 599-2888

HONDURAS

Almacen Pajaro Azul S.A. de C.V.

BO.Paz Barahona

3 Ave.11 Calle S.O

San Pedro Sula, Honduras

TEL: (504) 553-2029

MARTINIQUE

Musique & Son

Z.I.Les Mangle

97232 Le Lamantin

Martinique F.W.I.

TEL: 596 596 426860

URUGUAY

Todo Musica S.A.

Francisco Acuna de Figueroa

1771

C.P.: 11.800

Montevideo, URUGUAY

TEL: (02) 924-2335

VENEZUELA

Instrumentos Musicales

Allegro,C.A.

Av.las industrias edf.Guitar import

#7 zona Industrial de Turumo

Caracas, Venezuela

TEL: (212) 244-1122

EUROPE

AUSTRIA

Roland Elektronische

Musikinstrumente HmbH.

Austrian Office

Eduard-Bodem-Gasse 8,

A-6020 Innsbruck, AUSTRIA

TEL: (0512) 26 44 260

BELGIUM/FRANCE/

HOLLAND/

LUXEMBOURG

Roland Central Europe N.V.

Houtstraat 3, B-2260, Oevel

(Westerlo) BELGIUM

TEL: (014) 575811

CROATIA

ART-CENTAR

Degenova 3.

HR - 10000 Zagreb

TEL: (1) 466 8493

CZECH REP.

CZECH REPUBLIC

DISTRIBUTOR s.r.o

Voctárova 247/16

CZ - 180 00 PRAHA 8,

CZECH REP.

TEL: (2) 830 20270

DENMARK

Roland Scandinavia A/S

Nordhavnsvej 7, Postbox 880,

DK-2100 Copenhagen

DENMARK

TEL: 3916 6200

FINLAND

Roland Scandinavia As, Filial

Finland

Elannontie 5

FIN-01510 Vantaa, FINLAND

TEL: (0)9 68 24 020

GERMANY

Roland Elektronische

Musikinstrumente HmbH.

Oststrasse 96, 22844

Norderstedt, GERMANY

TEL: (040) 52 60090

GREECE/CYPRUS

STOLLAS S.A.

Music Sound Light

155, New National Road

Patras 26442, GREECE

TEL: 2610 435400

HUNGARY

Roland East Europe Ltd.

Warehouse Area ‘DEPO’ Pf.83

H-2046 Torokbalint,

HUNGARY

TEL: (23) 511011

IRELAND

Roland Ireland

G2 Calmount Park, Calmount

Avenue, Dublin 12

Republic of IRELAND

TEL: (01) 4294444

ITALY

Roland Italy S. p. A.

Viale delle Industrie 8,

20020 Arese, Milano, ITALY

TEL: (02) 937-78300

NORWAY

Roland Scandinavia Avd.

Kontor Norge

Lilleakerveien 2 Postboks 95

Lilleaker N-0216 Oslo

NORWAY

TEL: 2273 0074

POLAND

ROLAND POLSKA SP. Z O.O.

UL. Gibraltarska 4.

PL-03 664 Warszawa

POLAND

TEL: (022) 679 4419

PORTUGAL

Roland Iberia, S.L.

Portugal Office

Cais das Pedras, 8/9-1 Dto

4050-465, Porto, PORTUGAL

TEL: 22 608 00 60

ROMANIA

FBS LINES

Piata Libertatii 1,

535500 Gheorgheni,

ROMANIA

TEL: (266) 364 609

RUSSIA

MuTek

Dorozhnaya ul.3,korp.6

117 545 Moscow, RUSSIA

TEL: (095) 981-4967

SLOVAKIA

DAN Acoustic s.r.o.

Povazská 18.

SK - 940 01 Nové Zámky

TEL: (035) 6424 330

SPAIN

Roland Iberia, S.L.

Paseo García Faria, 33-35

08005 Barcelona SPAIN

TEL: 93 493 91 00

SWEDEN

Roland Scandinavia A/S

SWEDISH SALES OFFICE

Danvik Center 28, 2 tr.

S-131 30 Nacka SWEDEN

TEL: (0)8 702 00 20

SWITZERLAND

Roland (Switzerland) AG

Landstrasse 5, Postfach,

CH-4452 Itingen,

SWITZERLAND

TEL: (061) 927-8383

UKRAINE

EURHYTHMICS Ltd.

P.O.Box: 37-a.

Nedecey Str. 30

UA - 89600 Mukachevo,

UKRAINE

TEL: (03131) 414-40

UNITED KINGDOM

Roland (U.K.) Ltd.

Atlantic Close, Swansea

Enterprise Park, SWANSEA

SA7 9FJ,

UNITED KINGDOM

TEL: (01792) 702701

NORTH AMERICA

MIDDLE EAST

BAHRAIN

Moon Stores

No.1231&1249 Rumaytha

Building Road 3931, Manama

339 BAHRAIN

TEL: 17 813 942

IRAN

MOCO INC.

No.41 Nike St., Dr.Shariyati Ave.,

Roberoye Cerahe Mirdamad

Tehran, IRAN

TEL: (021)-2285-4169

ISRAEL

Halilit P. Greenspoon & Sons

Ltd.

8 Retzif Ha'alia Hashnia St.

Tel-Aviv-Yafo ISRAEL

TEL: (03) 6823666

CANADA

Roland Canada Ltd.

(Head Office)

5480 Parkwood Way

Richmond B. C., V6V 2M4

CANADA

TEL: (604) 270 6626

Roland Canada Ltd.

(Toronto Office)

170 Admiral Boulevard

Mississauga On L5T 2N6

CANADA

TEL: (905) 362 9707

U. S. A.

Roland Corporation U.S.

5100 S. Eastern Avenue

Los Angeles, CA 90040-2938,

U. S. A.

TEL: (323) 890 3700

JORDAN

MUSIC HOUSE CO. LTD.

FREDDY FOR MUSIC

P. O. Box 922846

Amman 11192 JORDAN

TEL: (06) 5692696

KUWAIT

EASA HUSAIN AL-YOUSIFI

& SONS CO.

Al-Yousifi Service Center

P.O.Box 126 (Safat) 13002

KUWAIT

TEL: 00 965 802929

LEBANON

Chahine S.A.L.

George Zeidan St., Chahine

Bldg., Achrafieh, P.O.Box: 16-

5857

Beirut, LEBANON

TEL: (01) 20-1441

OMAN

TALENTZ CENTRE L.L.C.

Malatan House No.1

Al Noor Street, Ruwi

SULTANATE OF OMAN

TEL: 2478 3443

QATAR

Al Emadi Co. (Badie Studio &

Stores)

P.O. Box 62, Doha, QATAR

TEL: 4423-554

SAUDI ARABIA aDawliah Universal

Electronics APL

Behind Pizza Inn

Prince Turkey Street aDawliah Building,

PO BOX 2154,

Alkhobar 31952

SAUDI ARABIA

TEL: (03) 8643601

SYRIA

Technical Light & Sound

Center

Rawda, Abdul Qader Jazairi St.

Bldg. No. 21, P.O.BOX 13520,

Damascus, SYRIA

TEL: (011) 223-5384

TURKEY

ZUHAL DIS TICARET A.S.

Galip Dede Cad. No.37

Beyoglu - Istanbul / TURKEY

TEL: (0212) 249 85 10

U.A.E.

Zak Electronics & Musical

Instruments Co. L.L.C.

Zabeel Road, Al Sherooq Bldg.,

No. 14, Ground Floor, Dubai,

U.A.E.

TEL: (04) 3360715

As of Oct. 1, 2007 (ROLAND)

G6017373R4 ARTC

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement