EX-VB300 Datablad

EX-VB300 Datablad
Built-in 3-axis accelerometers record the time when shock occurs
Measure and compute real-time spectral data using FFT
• Record storage, transport or operational data over time
• USB interface for easy set-up and data download
• Record and time 3-axis shock and peaks
• Real time FFT Frequency and Time-Domain Vibration Analysis
• Datalogs 85,764 peak acceleration samples
• Selectable X-, Y-, Z-axis or any combination (via software)
• Selectable data sampling rate: 50ms to 24 hours
• Manual and Programmable start modes
• User-programmable record threshold
• Long battery life
• Complete with Magnetized/Bolt-on Mounting Base, 3.6V Lithium
battery and Windows® 98, 2000, XP, and Vista compatible analysis
Records shock and vibration history in
shipping containers
USB connector easily plugs into a computer for
data analysis
Sensor Type
Acceleration Sampling Rate
Acceleration Range
Acceleration Resolution
Acceleration Accuracy
Sampling rate
Data Format
MEMS semiconductor
0 to 60Hz
500 ms to 24 hours
4Mbit Flash; 85764 samples (approx. 28588 samples/axis)
Time stamped peak acceleration, average and peak vector sum
3.7 x 1.1 x 0.8" (95 x 28 x 21mm)
1oz (20g)
Ordering Information:
VB300 ............Three Axis G-Force Datalogger
42299 ............3.6V Lithium Batery (pkg of 2)
Specifications subject to change without notice.
11/18/10 - R1
Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
ATAL B.V.—P.O.Box 783—NL-1440 AT Purmerend—Netherlands—Ph. +31 299 630 610—Email [email protected]
3-Axis G-Force Datalogger
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF