FRT535P

FRT535P
Hot Water Generation – Steam/Water Single Wall
Flo-Rite-Temp® Steam/Water Shell and Tube Heat Exchanger Pre-Piped Single Temperature
Model FRT535P (Parallel/Redundant)
Flo-Rite-Temp instantaneous water heater assembly for nonrecirculating hot water systems. Flo-Rite-Temp pre-piped single
temperature systems offer three heat exchanger options fully
assembled and include: steam trap, air vent, thermometer, Clean-InPlace connection ports, vacuum breaker, and isolation valves.
Operational Specifications
• +/-4°F water temperature control at points of use 25’
downstream during demand
• Feed-forward control utilizing pressure sensitive fail safe (cold)
control valve
• Straight admiralty brass tube bundle with removable floating
end cover for mechanical cleaning
• Utilizes constant low pressure steam to assure positive
condensate drainage of exchanger
• Only 4 connections required: steam, condensate, cold water,
mixed water out
Technical Specifications
•
•
•
•
•
•
•
•
•
•
Maximum steam pressure: 15 PSIG
Maximum domestic pressure: 150 PSI
Maximum designed water side pressure drop: 10 PSI
Design conditions: Domestic-35 GPM (Redundant)/70 GPM
(Parallel) at 100°F delta T using 15 PSIG steam
Complete assembly Lead Free Compliant
All domestic side valve fittings and isolation valves, strainers,
inlet/return check valves, inlet and system blend return
thermometers pre-piped.
Clean-In-Place connections for chemically cleaning of control
valve and heat exchanger without disassembly of the Flo-RiteTemp
Heat exchanger tubes shall be straight 5/8” OD admiralty brass
expanded into Navel Brass tube sheets with a free floating
bolted end cover
Water pipe of type L copper
Fabricated carbon steel frame with machine grade enamel
paint
83.7±2.0
(2126±51)
Standard Materials of Construction
•
•
•
•
•
•
•
•
Control Valve: Lead Free Bronze
Water pipe: Type L Copper
Fittings: Lead Free Brass/Bronze
Tube bundle: Admiralty Brass tubes expanded into Navel Brass
tube sheets
Heat Exchanger Shell: Carbon Steel
Steam Trap: Model 813 Cast Iron
Air Vent: Model TS-2 angle-pattern-bronze
Vacuum Breaker: Brass
78.8±2.0
(2001±51)
20.0
(508)
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit armstronginternational.com for up-to-date information.
Armstrong Hot Water Group, 221 Armstrong Blvd., Three Rivers, MI 49093 – USA Phone: 269-279-3602, Fax: 269-279-3130
armstronginternational.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement