INS-KRF6-0011

INS-KRF6-0011
YANMAR CO., LTD.
YANMAR AMERICA CORP.
Item Lev. O
1
2
3
4
-
X
X
Description
Part No.
119749-08110
129689-44310
129689-44320
129689-44330
Quantity
Foot, Engine Mounting
Washer, Plain 10mm, (ANSI B18.22.1)
Washer, Lock 10mm, (BS 4464) (Helical spring)
Bolt, M10 X 1.50 - 25 (Flange hex head)
2
8
8
8
Remarks
(A)
(A)
MODELS
3TNV70
3TNV76
4
2
3
1
Remarks:
(A) 26106-100202 is a service part used to replace the bolt, lock washer and washer assembly
(items: 2, 3 and 4).
PAGE 1 OF 2
KRF6 - MOUNTING FEET KIT
INS-KRF6-0011
YANMAR CO., LTD.
YANMAR AMERICA CORP.
Installation Instructions
The universal leg kit has been designed so each leg can be mounted on any engine-mounting pad. You DO NOT need a special kit for
the front and the back engine mounting pads.
Hand tighten all bolts and nuts until assembly is completed, then torque according to specifications in Table 1. The numbers in ()
represent the item numbers.
1. Install Engine Mounting Feet (1) to engine mounting pads using Washers (2), Lock Washers (3) and M10 X 1.5 - 25mm
bolts (4) provided in kit. Bolts used to mount shipped engines are the same size but not long enough and should not be
used.
NOTE: Comply with torque standards in the table to avoid unexpected damage during installation or in the future.
TABLE 1:
Foot-lbf
N-m
Diameter x Pitch
Kgf-m
M10 x 1.50
4.5 ~ 5.5
32.5 ~ 39.8
44.0 ~ 54.0
PAGE 2 OF 2
KRF6 - MOUNTING FEET KIT
INS-KRF6-0011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement