BV AVS.4.12.1404SI CC-06 Issuing Center: ANTWERP Page 1/2 VERITAS CERTIFICATE OF CONFORMITY The undersigned, Rud i Vandenbempt, acting within the scope of the General Conditions of BUREAU VERITAS, certifies herewith the supply of FFL-1-120 LEAD- IN, APPROACH ANDIOR RTILS CAPACITOR DISCHARGE FLASHING INSET LIGHT - was found in conformity with: • the request of inspection from ADB/ZAVENTEM • the cata logue sheet A.02.620 Date of inspection: July 1ih, 2012 and has been, upon request of: ADB bvba. Leuvensesteenweg,585 B - 1930 ZAVENTEM/BELGIUM - inspected in conformity with the applicab le requirements of • the ICAO - Annex 14 - Fifth edition - Volume I - Para 5.3.4. 17 & 5.3.4 .1 8, 188.8.131.52, 184.108.40.206, 5.3.7,5.3.8 • FAA AC150/5345-51A type L-849 and L-859 • the FAA E-2628, E-2325, E-2689 Issued at Antwerp, July 1ih 2012 BUREAU VERITAS ANTWERP Rudi Vandenbempt I Inspector Particulars of inspection: detailed hereafter This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicable requirements occur during this period of validity. BV AVS.4.12.1404SI CC-06 Issuing Center: ANTWERP Page 2/2 VERITAS FUNCTIONALITY ACCORDING ICAO REQUIREMENTS • • Attendance. of functional tests at the Laboratory premises of the manufacturer: • Examination of test equipment • Checking of installation of units before testing • Attendance to functional tests according to the applicable procedures and Methods, including Photometry & load bearing test. PHOTOMETRY ACCORDING FAA REQUIREMENTS • • Attendance of photometric tests at the Laboratory premises of the manufacturer: • Examination of test equipment • Checking of installation of units before testing • Attendance to photometric tests according to the applicable procedures Test results are detailed in the attached records, annexed herewith CONCLUSION Taking into account the satisfactory results of examinations and assessments, it ca n be confirmed that the manufacturing and the test results for the above specified units are in conformity with. applicable standards, specifications and data sheets. (Details of standards and specifications are indicated on page 1 of this certificate and data sheet as per catalogue). ENCLOSURE Records of tests which have been attended, duly stamped for identification by BUREAU VERITAS: • • • Photometric test results for flashlight: • Isocandela curves Validation test reports Load test result BUREAU VERITAS ANTWERP I This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicab le requirements occur during this period of validity.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project