AdVantEdge Full Line Brochure 5 2013

AdVantEdge Full Line Brochure 5 2013
by AdEdge Water Technologies LLC
Arsenic
Treatment
Solutions for
Residential
Water
Applications
Point of Use Systems
Point of Entry Systems
AdEdge :DWHUTechnologies, //&., 5152 Belle Wood Court, Suite A, Buford, GA 30518 (866) 823-3343 (678) 835-0057
Medallion Series POE
Arsenic Removal Systems
by AdEdge Water Technologies LLC
Packaged Residential Arsenic Adsorption Systems
TM
AdVantEdge’s POE Medallion Series treatment systems offer a new level of quality and convenience. These packaged
residential and light commercial systems, specifically designed for arsenic treatment are the culmination of years of
experience. The systems utilize AdEdge’s AD33 adsorption media for reliable, simple, and cost-effective treatment. No
other technology can compare to its simplicity and ease of use. The media can operate over a wide range of water quality
and utilizes no regeneration chemicals, salt or additives. Only periodic backwashing is required. The spent media, upon
exhaustion, is easily disposed as non-hazardous waste.
Some Features and Benefits include:

Complete pre-packaged, pre-designed modular system for ease of use

Reduces Up to 99% reduction of Arsenic (V) and (III) without chemicals

Automatic controls with LCD display / readout

Proven, reliable treatment without hassle of chemicals or brine

Long product life for economical performance
AdVantEdge offers three sizes of systems to accommodate home, light commercial and
low flow remediation applications, The POE-5-1252, POE-7-1354, and the POE-10-1465
are sized for 5-gpm, 7-gpm, and 10-gpm flows respectively. The following table highlights
the basic system specifications.
Model Specifications
Specifications
Model
Model
Model
POE-5-1252
POE-7-1354
POE-10-1465
Dimensions
12”W x 52”H, fiberglass
13”W x 54”H, fiberglass
14”W x 65”H, fiberglass
Quantity of AdEdge
Media
2 cubic feet
2.75 cubic feet
4 cubic feet
Media Type
AD33
AD33
AD33
Normal service flow
4-6 gpm
6-8 gpm
8-10 gpm
Peak flow Rate
6 gpm
8 gpm
10 gpm
Backwash max flow
5 gpm
7 gpm
10 gpm
Backwash cycles
Automatic preprogrammed
Automatic, preprogrammed
Automatic, preprogrammed
Inlet / Outlet
1” dia MPT PVC
1” dia MPT PVC
1” dia MPT PVC
Drain
3/4” connection
3/4” connection
3/4” connection
Underbed material
Gravel / stone
Gravel / stone
Gravel / stone
Shipping weight unit
120 lbs
160 lbs
230 lbs
Temperature Range
33
oF
– 100
oF
33
oF
– 100
oF
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
33 oF – 100 oF
Recommended Water Quality y
Q: What is the recommended incoming
water quality for best performance?
Parameter
All Models
Arsenic concentration range
5 – 500 ppb 1, 2
Typical treatment goal
< 10 ppb total arsenic 3
Arsenic types reduced
As (V) and As (III)
Removal efficiency
90-99% typical
Estimated media life
water quality and usage
dependent 4
Spent media disposal
Non-hazardous waste landfill 5
Recommended incoming water
quality for best results:
pH range:
Arsenic:
Iron:
Manganese:
Sulfides:
Silica:
Phosphate:
Sulfate:
Fluoride:
Hardness:
Sediment:
Tannins:
AdVantEdge
Q: What are some of the
valve / microprocessor
features?





Built-in flow controls
Flow totalizer for tracking
gallons treated for media
changeout
Built-in sample ports
LCD readout
Variable sequencing
backwashing capability
Q: How does the technology compare to
other treatment alternatives?
Comparison of Point of Entry Treatment Alternatives
Use with water conditioner unit:
5.5 – 8.5
5 - 100 ppb
< 0.5 mg/L
< 0.05 mg/L
< 0.1 mg/L
< 30 mg/L
< 0.5 mg/L
< 100 mg/L
< 1.0 mg/L
< 300 mg/L
use pre-filter
consult
Not required, but if utilized,
place softener unit prior to
AdEdge adsorption system
Notes:
1. Above table is guideline only; AdVantEdge dealer responsible for
completing site specific profile for prescribing appropriate system with
AdVantEdge technical support
2. Systems can reduce higher arsenic concentrations; consult AdEdge for
details
3. Treatment goal reflects current EPA MCL of 10 ppb arsenic
4. Media life projections can be provided by AdEdge upon review of water
profile and projected use information.
5. Spent media passes EPA TCLP (Toxic Characteristic Leaching Procedure)
Feature
Anion
Exchange
Reverse Osmosis
Medallion Series
AD33 Adsorption
System
Type of arsenic
treated
As (V)
As (V)
As (V) and (III)
Pre-oxidation step
required for Arsenic
removal
Yes
Yes
No
Chemical Use
Yes, Salt
Membrane cleaning
None
Loss (waste) of
water
5%
25-75%
< 1%
Frequency of
Regeneration
Approx. every
2000-4,000
gallons
Not Applicable
Non regenerable;
disposable media
Hazardous waste
generation
Yes
Concentrated
arsenic reject
None
Off-taste potential
Yes
No
No
Maintenance
High
High
Low
Arsenic “dumping”
when capacity of
media reached
Possible
N/A
No
Changes in water
chemistry
Lowers pH
Removes TDS
Negligible
Relative cost
Moderate
High
Moderate
Contact your local dealer:
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
Notice: Information is believed to be reliable and is offered in good faith with no warranties or implied warranties or fitness for a particular use. Customer is responsible for determining whether use conditions and
information in this document are appropriate for specific applications and for ensuring compliance with applicable laws and regulations.
AdVantEdge 09-11
by AdEdge Water Technologies LLC
Under-counter POU System for
Arsenic, Cysts, Lead, PCBs,
VOCs, and much more.
Model: 3OXV$V3E3,'
AdVantEdge Plus-As Series System
The most technologically advanced residential
water treatment device available today.
AdVantEdge Plus-As drinking water systems
provide the utmost in performance, safety, and
convenience. Innovative, highly effective
Plus-As systems feature a solid carbon block
with Bayoxide E33 arsenic removal technology
direct from AdEdge to provide filtration,
electro-kenetic adsorption, and chemical/physical
adsorption to provide the most effective
contaminant reduction possible.
The effectiveness of AdVantEdge Plus-As
drinking water systems in treating a broad
spectrum of aesthetic issues as well as health
concerns makes it the technology choice by
consumers throughout the world.
One Filter Does It All!
Tested to reduce Arsenic, Cysts, Lead, PCBs, VOCs and much more.
Sub-micron filtration – 0.5 Micron
Easy and Convenient to use.
Provides wonderfully delicious drinking water. Improves the taste of
beverages – coffee, tea, juices, and drinks of all kinds as well as providing
high-quality water for food preparation and cooking.
Outstanding Warranty.
by AdEdge Water Technologies LLC
Plus-As cartridges are tested according to ANSI/NSF Standards 42 and 53 for the following
following reduction claims:
Arsenic, Asbestos, Chloramine, Chlordane, Chlorine, Cyst (Giardia, Cryptosporidium, Entamoeba),
Lead, Mercury, MTBE, Particulate matter (Class 1 (0.5 Micron)), PCB, Toxaphene, Turbidity, Volatile
Organic Compounds (listed below):
Alachlor, Atrazine, Benzene, Carbofuran, Carbon Tetrachloride, Chlorobenzene, Chloropicrin, 2 4-D,
Dibromochloropropane, o-Dichlorobenzene, p-Dichlorobenzene, 1 2-Dicloroethylene, 1 1-Dichloroethylene, cis-1
2-Dicloroethylene, trans-1 2-Dichloroethylene, 1 2-Dichloropropane, cis-1 3-Dichloropropylene, Dinoseb, Endrin,
Ethylbenzene, Ethylene Dibromide (EDB), Haloacetonitriles (HAN), Bromochloroacetonitrile, Dibromoacetonitrile,
Dichloroacetonitrile, Trichloroacetonitrile, Haloketones (HK), 1 1-Dichloro-2-Propanone, 1 1
1-Trichloro-2-Propanone, Heptachlor, Heptachlor Epoxide, Hexachlorobutadiene, Hexachlorocyclopentadiene,
Lindane, Methoxychlor, Pentachlorophenol, Simazine, Styrene, 1 1 2 2-Tetrachloroethane, Tetrachloroethylene,
Toluene, 2 4 5-TP (Silvex), Tribromoacetic Acid, 1 2 4-Trichlorobenzene, 1 1 1-Trichloroethane, 1 1
2-Trichloroethane, Trichloroethylene, Trihalomethanes (TTHM), Chloroform (surrogate), Bromoform,
Bromodichloroethane, Dibromochloromethane, Xylenes.
This list of contaminants that Plus-As drinking water systems reduce does not mean that these substances are
present in your tap water. Be sure to check for compliance with state and local laws and regulations. Not
intended to be used where the water is microbiologically unsafe or with water of unknown quality without
adequate disinfection before or after the unit. Systems certified for cyst reduction may be used on disinfected
water that may contain filterable cysts.
Plus-As Series drinking water systems are manufactured by Multi-Pure Corporation using Arsenic Reduction
technology from AdEdge Technologies, Inc.
Specifications
Model: Plus-As-Pb-PID
Filtration Cartridge
Materials Housing
Particulate Retention
Faucet
Shut Off Device
Arsenic media
Inlet / Outlet
4.75” x 10.5” MPNNAs cartridge
Polypropylene (4.0 lbs, Height 13.0”, Body Diameter 6.75”)
0.5 micron
Lead-free faucet
Flow Meter w/Shut-off Device
AdEdge custom AD33L product
3/8” / 1/4”
Performance
Rated Cartridge Life
Arsenic concentration
Replacement
Rated flow rate
Water Pressure
960 gallons
Up to 50 ppb influent arsenic
Every 12 months or 960 gallons. whichever comes first
1.0 gpm @ 60psi
125 psi max / 30 psi min
Contact your local dealer:
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
AdVantEdge -
Under-counter POU System for
Sediment and Arsenic Reduction
by AdEdge:DWHU Technologies //&
Model: DWS-2S-2710-01
AdVantEdge DWS-2S-2710-01
The DWS-2S-2710-01 is a dual stage water
treatment approach with an integrated system
design, ideal for under-counter household use. The
system includes a selected 10 inch, 5 micron
polypropylene sediment cartridge, a 2.75 x 9.75
inch arsenic removal cartridge, housing
components, i.e., sumps, caps, mounting bracket,
faucet (lead-free), shut-off device, and tubing for a
complete unit. AdEdge Technologies supplies both
the system components and replacement cartridges.
The system is available to qualified water treatment
distributors and dealers for subsequent re-sale to
end users. Replacement cartridges are available
through AdVantEdge authorized distributors.
Specifications
Model: DWS-2S-2710-01
Filtration Cartridge
Arsenic Cartridge
Materials Housing
Mounting
Faucet
Shut Off Device
Arsenic media
Water source
NSF testing
Box/Packaging
10 inch standard, 5 micron polypropylene sediment cartridge
10 inch standard (2.75 x 9.75 inch); AdVantEdge Model AD2710S
Injection molded polypropylene
Painted metal mounting bracket
Lead-free faucet with ¼ inch tubing
Mechanical countdown shut-off device mounted on bracket
AdEdge custom AD33L product
Potable water of known microbiological quality (microbiologically safe)
Components tested in accordance with NSF protocols, no specific listings
Plain white box, with or without Label
Performance
Rated Cartridge Life
Arsenic concentration
Replacement
Rated flow rate
Parameters
1000 gallons
Up to 50 ppb influent arsenic
Every 12 months or 1000 gallons, whichever comes first
0.5 gpm
5 micron polypropylene: sediment | AD2710S: arsenic
Contact your local dealer:
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
AdVantEdge 09-11
Under-counter POU System for
Arsenic Reduction
by AdEdge:DWHU Technologies //&
Model: DWS-2S-2710-02
AdVantEdge DWS-2S-2710-02
The DWS-2S-2710-02 is a dual stage water
treatment approach with an integrated system
design, ideal for under-counter household use. The
system includes two selected 2.75 x 9.75 inch
arsenic removal cartridges, housing components,
i.e., sumps, caps, mounting bracket, faucet (leadfree), shut-off device, and tubing for a complete
unit. AdEdge Technologies, Inc. supplies both the
system components and replacement cartridges.
The system is available to qualified water treatment
distributors and dealers for subsequent re-sale to
end users. Replacement cartridges are available
through AdVantEdge authorized distributors.
Specifications
Model: DWS-2S-2710-02
Arsenic Cartridge
Materials Housing
Mounting
Faucet
Shut Off Device
Arsenic media
Water source
NSF testing
Box/Packaging
Two 10 inch standard (2.75 x 9.75 inch); AdVantEdge Model AD2710S
Injection molded polypropelene
Painted metal mounting bracket
Lead-free faucet with ¼ inch tubing
Mechanical countdown shut-off device mounted on bracket
AdEdge custom AD33L product
Potable water of known microbiological quality (microbiologically safe)
Components tested in accordance with NSF protocols, no specific listings
Plain white box, with or without Label
Performance
Rated Cartridge Life
Arsenic concentration
Replacement
Rated flow rate
Parameters
1000 gallons
Up to 50 ppb influent arsenic
Every 12 months or 1000 gallons, whichever comes first
0.5 gpm
AD2710S: arsenic
Contact your local dealer:
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
AdVantEdge 09-11
by AdEdge:DWHU Technologies //&
Under-counter POU System for
Arsenic, Lead, Cyst, Chlorine,
Taste & Odor Reduction
Model: EHC-2S-2710-01
AdVantEdge EHC-2S-2710-01
The EHC-2S-2710-01 is a dual stage water
treatment approach with an integrated system
design, ideal for under-counter household use. The
system includes a selected, NSF certified, 10 inch
carbon block cartridge for lead, cyst, chlorine, taste
and odor reduction, a 2.75 x 9.75 inch arsenic
removal cartridge, housing components, i.e., sumps,
caps, mounting bracket, faucet (lead-free), shut-off
device, and tubing for a complete unit. AdEdge
Technologies supplies both the system components
and replacement cartridges. The system is available
to qualified water treatment distributors and dealers
subsequent re-sale to end users. Replacement
cartridges are available through AdVantEdge
authorized distributors.
Specifications
Model: EHC-2S-2710-01
Carbon Block Cartridge
Arsenic Cartridge
Materials Housing
Mounting
Faucet
Shut Off Device
Arsenic media
Chlorine, Taste, Odor Media
Water source
NSF testing
Box/Packaging
10 inch standard (2.75 x 9.75 inch); AdVantEdge Model F-241
10 inch standard (2.75 x 9.75 inch); AdVantEdge Model AD2710S
Injection molded polypropylene
Painted metal mounting bracket
Lead-free faucet with ¼ inch tubing
Mechanical countdown shut-off device mounted on bracket
AdEdge custom AD33L product
Carbon Block 0.5 micron; NSF Certified
Potable water of known microbiological quality (microbiologically safe)
Components tested in accordance with NSF protocols, no specific listings
Plain white box, with or without Label
Performance
Rated Cartridge Life
Arsenic concentration
Replacement
Rated flow rate
Parameters
1000 or 800 gallons (see cartridge specifications for water parameters & capacity)
Up to 50 ppb influent arsenic
Every 12 months or cartridge rating, whichever comes first
0.5 gpm
F-241: odor, taste, chlorine | AD2710S: arsenic
Contact your local dealer:
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
AdVantEdge 09-11
Under-counter POU System for
Arsenic Reduction
By AdEdge Water Technologies, LLC
Model: DWS-4510-01
AdVantEdge DWS-4510-01
The DWS-4510-01 is a single stage water
treatment approach with an integrated system
design, ideal for under-counter household use.
The system includes a selected 4.5 x 10 inch
arsenic removal cartridge, housing components,
i.e., sumps, caps, mounting bracket, faucet (leadfree), shut-off device, and tubing for a complete
unit. AdEdge Water Technologies supplies both
the system components and replacement
cartridges. The system is available to qualified
water treatment distributors and dealers for
subsequent re-sale to end users. Replacement
cartridges are available through AdVantEdge
authorized distributors.
Specifications: Model: DWS-4510-01
Arsenic Cartridge
Materials Housing
Mounting
Faucet
Shut Off Device
Arsenic media
Water source
NSF testing
Box/Packaging
Dimensions
4.5 x 10-inch; AdVantEdge Model AD4510S
Injection molded plastic
Painted metal mounting bracket
Lead-free faucet with ¼ inch tubing
Mechanical countdown shut-off device mounted on bracket
AdEdge custom AD33L product
Potable water of known microbiological quality (microbiologically safe)
Components tested in accordance with NSF protocols, no specific listings
Plain white box, with or without label
7.5” width / 21” height
Performance
Rated Cartridge Life
Arsenic Concentration
Replacement
Rated Flow Rate
Parameters
1000 gallons
3000 gallons
Up to 100 ppb influent arsenic; if higher than 100 ppb please consult AdVantEdge
Up to 50 ppb influent arsenic
Every 12 months or 1000 gallons, whichever comes first (for 100 ppb arsenic)
Every 12 months or 3000 gallons, whichever comes first (for 50 ppb arsenic)
0.5 gpm
AD4510S: arsenic
Contact Your Local Distributor:
AdEdge Water Technologies, LLC
5152 Belle Wood Court, Suite A
Buford, Georgia 30518 (866) 8ADEDGE (678) 835-0057 (fax)
www.advantedgewater.com
POU CARTRIDGE FOR ARSENIC REDUCTION
High Performance Point-of-Use Solutions
CARTRIDGE PERFORMANCE
Applications
Arsenic
Reduction
Capacity
Certifications
Ideal for Under-counter or countertop POU systems
Model AD2710S: 50 µg/l of arsenic, 0.5 gpm flow, pH 6.5-8.5
Model AD4510S: 100 µg/l of arsenic, 1,000 gallon capacity,
0.5 gpm flow, pH 6.5-8.5
Model AD4150S: 50 µg/l of arsenic, 3,000 gallon capacity, 0.5
gpm flow, pH 6.5-8.5
Reduction of up to 99% of total arsenic. Effective for both As
(III) & As (V).
1000 – 3,000 gallons; 4-6 times longer life than other
commercial adsorption options (conservative rating at pH 8.5)
Model:
AD2710S
Model:
AD4510S
POU
AdVantEdge has two POU cartridges for arsenic reduction. These products are the most cost-effective
technology to date to meet the challenges of the 10 micrograms per liter (µg/l) drinking water standard
for arsenic established by EPA. Products incorporate a proprietary iron oxide media for long life and high
performance. Cartridges effectively reduce both Arsenic (V) and Arsenic (III) without pre-oxidation. Ideal
applications include under-counter and countertop POU systems. The standard Model AD2710S has been
optimized for extended life and fits most standard and slimline 10 inch housings. The AD2710S is designed
to treat 50 µg/l of total arsenic to less than 10 µg/l(based on pH 8.5, Arsenic (V) challenges using NSF 53
protocols). The AD4510S version is a 4.5 x 10 inch BB size cartridge designed for tackling higher arsenic
concentrations above 50 µg/l. Both are filled with 100% Adedge Technologies AD33 arsenic reduction
media for maximum performance.
NSF 61 product listing on Media (see Adedge for details).
Components
FDA listed components
Extractables
Imparts no harmful chemicals into the treated product water
TECHNICAL SPECIFICATIONS
General Specifications
Dimensions
Media type(s)
Model AD2710S
2.75 x 9.75 inch
Custom AD33L Iron Oxide
Contaminant Reduction
Arsenic (V) and (III)
Model AD4510S
4.5 x 9.75 inch
Custom AD33L Iron Oxide
Arsenic (V) and (III)
1,000 gallons up to 100 µg/l arsenic
Cartridge Life
1,000 gallons
3,000 gallons up to 50 µg/l arsenic
Cartridge shell
FDA grade Polyethylene
FDA grade Polyethylene
Micron rating
25 Micron Nominal
25 Micron Nominal
Pressure drop
< 8 psi at 0.5 gpm
< 8 psi @ 0.5 gpm
Fits most conventional
Fits most conventional
housings – consult your
housings - consult your
Housings
AdVantEdge Distributor for
AdVantEdge Distributor for
details
details
Recommended Water Quality for Best Performance
pH
6.5 – 8.5
Arsenic 50 or 100 µg/l (see above) Phosphate < 0.5 mg/l
Iron
< 0.5 mg/l
Silica
< 30 mg/l
Sulfides
< 0.1 mg/l
Manganese < 0.05 mg/l
Sulfate < 100 mg/l
Fluoride
< 1 mg/l
Contact your local dealer:
AdEdge Water Technologies, LLC.
5152 Belle Wood Court, Suite A
Buford, Georgia 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
Notice: Information is believed to be reliable and is offered in good faith with no warranties or implied warranties or fitness for a particular use. Customer is responsible for determining whether use
conditions and information in this document are appropriate for specific applications and for ensuring compliance with applicable laws and regulations.
POU CARTRIDGE FOR ARSENIC REDUCTION
Point-of-Use Arsenic, Chlorine, Taste & Odor Solution
CARTRIDGE PERFORMANCE
Applications
Arsenic
Reduction
Capacity
Contaminants
Certifications
Components
Extractables
Up to 50 µg/l of arsenic, rated flow 0.5 gpm, pH 6.58.5. Ideal for under-counter or countertop POU systems.
Reduction of up to 99% of total Arsenic. Effective for
both As (III) & As (V).
800 gallons (approx. 1 year); 4-6 times longer life than
other commercial adsorption options (conservative
rating at pH 8.5).
Arsenic, chlorine, taste, and odor reduction.
NSF 61 product listing on Media (see AdEdge for
details).
FDA listed components
Imparts no harmful chemicals into the treated product
water
Model:
AD2710C
POU
The AdVantEdge Model AD2710C 10 inch cartridge is designed to treat up to 50 µg/l of total arsenic to less
than 10 µg/l with a typical one year life (based on pH 8.5, Arsenic (V) challenges using NSF 53 protocols).
This unique combination of AdEdge Technologies AD33L arsenic reduction media and granular activated
carbon allows for arsenic reduction and better tasting water at the point-of-use. This product uniquely
combines high efficiency arsenic reduction and taste/odor capabilities for a practical and cost-effective
solution at the tap. AdVantEdge’s design utilizes the AdEdge proprietary iron oxide adsorption media for long
life and unparalleled performance to meet the challenges of the 10 micrograms per liter (µg/l) drinking water
standard for arsenic established by the EPA. The product effectively reduces both Arsenic (V) and Arsenic
(III) without pre-oxidation. Ideal applications include under-counter and countertop POU systems.
TECHNICAL SPECIFICATIONS
General Specifications
Dimensions
Media type(s)
Contaminant Reduction
Cartridge Life
Cartridge Shell
Micron Rating
Pressure Drop
Fittings
Model AD2710C
2.75 x 9.75 inch
AD33L Iron Oxide and GAC
Arsenic, Chlorine reduction, Taste/odor
800 gallons or 1 year
FDA grade Polyethylene
25 Micron Nominal
< 8 psi @ 0.5 gpm
Fits most convention housings – consult your
AdVantEdge Distributor for details
Recommended Water Quality for Best Performance
pH
6.5 – 8.5
Arsenic < 50 µg/l
Phosphate < 0.5 mg/l
Iron
< 0.5 mg/l
Silica
< 30 mg/l
Sulfides < 0.1 mg/l
Manganese < 0.05 mg/l
Sulfate < 100 mg/l
Fluoride < 1 mg/l
Contact your local dealer:
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
Notice: Information is believed to be reliable and is offered in good faith with no warranties or implied warranties or fitness for a particular use. Customer is responsible for determining whether use
conditions and information in this document are appropriate for specific applications and for ensuring compliance with applicable laws and regulations.
AdVantEdge -
POU IN-LINE FILTER CARTRIDGE FOR ARSENIC REDUCTION
The Ultimate In-Line Solution
CARTRIDGE PERFORMANCE
Applications
Arsenic
Reduction
Capacity
Contaminants
Certifications
Components
Extractables
Up to 50 µg/l of arsenic, rated flow 0.5 gpm, pH 6.58.5. Ideal for RO systems and food & beverage
applications.
Use as post filter for reduction of up to 99% of total
Arsenic; Effective for both As (III) & As (V).
600 gallons (no RO); 4-6 times longer life than other
commercial adsorption options.
800 gallons (post RO); based on application (consult
AdVantEdge or your dealer for specific details)
Arsenic, chlorine, taste, and odor reduction.
NSF 61 product listing on Media (see AdEdge for
details).
FDA listed components
Imparts no harmful chemicals into the treated product
water
Model:
AD2X10C
POU
The AdVantEdge Model AD2X10C 10 inch in-line filter cartridge is a unique combination of Adedge
Technologies AD33L arsenic reduction media and granular activated carbon which allows for arsenic reduction
and better tasting water at the point-of-use. This product uniquely combines high efficiency arsenic reduction
and taste/odor capabilities for a practical and cost-effective solution at the tap. AdVantEdge’s design utilizes
the AdEdge proprietary granular ferric iron oxide adsorption media for long life and unparalleled performance
to meet the challenges of the 10 micrograms per liter (µg/l) drinking water standard for arsenic established
by EPA. The product effectively reduces both Arsenic (V) and Arsenic (III) without pre-oxidation. Ideal
applications include use as an RO post filter, ice maker filters and other potable applications.
TECHNICAL SPECIFICATIONS
General Specifications
Dimensions
Media type(s)
Contaminant Reduction
Cartridge Life
Cartridge shell
Pressure drop
Fittings
Model AD2X10C
2 x 10 inch
AD33L Iron Oxide and GAC
Arsenic, Chlorine reduction, Taste/odor
800 gallons post RO; 600 gallons non RO
FDA grade Polyethylene
< 8 psi @ 0.5 gpm
¼ inch FNPT or Quick Connect® Fittings –
consult your AdVantEdge Distributor for
details
Recommended Water Quality for Best Performance
pH
6.5 – 8.5
Arsenic < 50 µg/l
Phosphate < 0.5 mg/l
Iron
< 0.5 mg/l
Silica
< 30 mg/l
Sulfides < 0.1 mg/l
Manganese < 0.05 mg/l
Sulfate < 100 mg/l
Fluoride < 1 mg/l
Contact your local dealer:
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
Notice: Information is believed to be reliable and is offered in good faith with no warranties or implied warranties or fitness for a particular use. Customer is responsible for determining whether use
conditions and information in this document are appropriate for specific applications and for ensuring compliance with applicable laws and regulations.
AdVantEdge -
POU CARTRIDGE FOR IRON & MANGANESE REDUCTION
High Performance Point-Of-Use Solutions
CARTRIDGE PERFORMANCE
Applications
Iron &
Manganese
Treatment
Goal
Capacity
Certifications
Secondary
Benefits
Extractables
Up to 3 mg/L of Fe and 0.5 mg/L of Mn, rated flow 0.5
gpm, pH 6.0-9.0. Ideal for under-counter or countertop
POU systems.
<0.3 mg/L of Fe; <0.05 mg/L of Mn
800 gallons (approx. 1 year); 4-6 times longer life than
other commercial adsorption options (conservative
rating at pH 9.0).
NSF 61 product listing on Media (see AdEdge for
details).
Effective pre-filter for many high Fe & Mn source waters
that also have high arsenic and sulfide levels.
Imparts no harmful chemicals into the treated product
water
Model:
ADOX2710
POU
The AdVantEdge Model ADOX2710 10 inch cartridge is designed to treat up to 3 mg/L Iron (Fe) to less than
0.3 mg/L, and 0.5 mg/L Manganese (Mn) to less than 0.05 mg/L with a typical 1 year operating life.
Combined with an AdVantEdge AD2710S arsenic reduction cartridge, the unique combination of filters will
allow for 800 gallons (approximately 1 year) of treated water. This product contains a highly efficient media
for a practical and cost-effective solution at the tap. AdVantEdge’s design utilizes a proprietary
oxidation/reduction media for long life and unparalleled performance to meet the challenges of Iron and
Manganese reduction. Ideal applications include under-counter and countertop POU systems and often times
used as a pre-filter to AdVantEdge or other POU products. Iron and Manganese contamination often results in
either rust or black color stains. High concentrations of Iron and Manganese can also lead to premature
failure of other high performance cartridges.
TECHNICAL SPECIFICATIONS
General Specifications
Dimensions
Media type(s)
Contaminant Reduction
Cartridge Life
Cartridge Shell
Micron Rating
Pressure Drop
Fittings
Model ADOX2710
2.75 x 9.75 inch
Proprietary
Iron & Manganese
800 gallons or 1 year
FDA grade Polyethylene
25 Micron Nominal
< 8 psi @ 0.5 gpm
Fits most conventional housings – consult
your AdVantEdge Distributor for details
Recommended Water Quality for Best Performance
pH
6.5 – 9.0
Arsenic < 50 µg/l
Phosphate < 0.5 mg/l
Iron
≤ 3.0 mg/l
Silica
< 30 mg/l
Sulfides < 0.1 mg/l
Manganese < 0.5 mg/l
Sulfate < 100 mg/
Fluoride < 1 mg/l
Contact your local dealer:
AdEdge Water Technologies, LLC,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
Notice: Information is believed to be reliable and is offered in good faith with no warranties or implied warranties or fitness for a particular use. Customer is responsible for determining whether use
conditions and information in this document are appropriate for specific applications and for ensuring compliance with applicable laws and regulations.
AdVantEdge 09-11
By AdEdge Water Technologies LLC
AdEdge :DWHUTechnologies //&Bayoxide® E33 Arsenic Adsorption Media
for Residential Point-of-Entry (POE) Systems
Q. What is the Bayoxide E33 media?
The product is a dry, granular or pelletized, iron oxide adsorption media. It has been designed
specifically for reducing arsenic and is ideal for both drinking and process water applications.
Q. Does Bayoxide E33 product reduce both forms of naturally occurring arsenic?
Yes. E33 media has capacity for both arsenic (III) and arsenic (V). However, the media is more
effective for arsenic (V). For situations where 100% arsenic (III) is present, AdEdge recommends preoxidation for enhanced performance since the total capacity of the media for arsenic (V) is greater than
for arsenic (III).
Q. How is Bayoxide E33 applied for a residential application?
The media is typically employed within a standard, conventional-size cylindrical fiberglass tank with a
top-mounted valve, laterals, riser and underbedding. Further sizing and use information is provided in
AdEdge Technologies product bulletins.
Q. Does Bayoxide E33 media impart any odor, taste or extractables into the water?
No. The E33 media meets NSF/ANSI drinking water Standard 61which confirms the safety and
quality of products in contact with drinking water.
Q. How long will the Bayoxide E33 media last?
The media life is dependent on several key factors: water chemistry, daily water usage, contact time,
and treatment goals. A typical 5 to 6 gpm design flow POE residential system treating arsenic 10 to
50 parts per billion (ppb), containing 2 cubic feet of E33 media will typically last two to four years
depending on the arsenic concentration, gallons per day usage, pH, and other factors. Treated water
testing will determine the appropriate changeout frequency.
Q.
What do I need to know about the water chemistry before properly applying the
Bayoxide E33?
The product is intended to be prescribed only by qualified AdVantEdge dealers or distributors. The
following analyses (at a minimum) are needed to predict performance: arsenic, pH, iron, manganese,
hardness, sulfate, phosphate, and sulfides. Although a complete water profile would be ideal, these
are the most important parameters for residential applications.
Q.
How is the spent media disposed?
The spent media (after being exhausted with an arsenic containing water) has been tested and has
passed the USEPA’s standard protocol for determining hazardous wastes. This test known as the
Toxicity Characteristic Leaching Procedure (TCLP) has shown that the media can be discarded as
non-hazardous waste in a sanitary landfill.
Q. Must iron and manganese be removed prior to treatment with the E33?
The product is not designed specifically for iron and manganese removal. However, like most
adsorption products, E33 works best if iron and manganese are minimized before adsorption due to
potential fouling of the adsorption bed with iron. Pretreatment for iron and manganese is
recommended to 0.5 mg/l and 0.05 mg/l, respectively, prior to arsenic adsorption for best results.
AdEdge has considerable experience with iron and manganese treatment. Contact AdEdge for
suggested pretreatment options.
Q. Does Bayoxide E33 media need to be backwashed? If so, how often?
Periodic backwashing is recommended for two reasons. The media, over time, can compact and
preferential channels can develop causing short-circuiting. Additionally, sediment or suspended solids
(if present) may accumulate in the adsorption media. To prevent excessive pressure drop or
channeling, gentle backwashing to lift, or fluff, the bed is performed periodically. Backwashing for a
residential system is typically performed once a month at 8-10 gpm/square foot for 14 minutes. Since
arsenic is chemically bound to the media, no arsenic is removed or desorbed during the backwashing
cycle. The backwash water typically has very low or non-detectable levels of arsenic.
Q. Can the Bayoxide E33 media be used in conjunction with an RO system or water
softener?
Yes. The preferred location of the arsenic treatment is placement after the softener or RO system.
Q. Would pH adjustment ever be recommended?
The product has a very wide operating pH range from 5.5 to 8.5. The media exhibits a higher arsenic
capacity with decreasing pH. Therefore, above 8.5 pH, AdEdge recommends lowering the pH for
increasing the longevity of the media. Contact AdEdge for details.
Q.
How do I monitor for arsenic?
Samples can be analyzed by a qualified laboratory for total arsenic using several different methods for
typically $30 to $50 per sample. Field test kits are also available that can detect the presence of
arsenic at very low concentrations (< 5 ppb). Field test kit results can be used as inexpensive
indicators of system performance, but should be used in conjunction with actual laboratory results.
More information can be provided about test kits by contacting AdEdge.
Q. How do I know if the Bayoxide E33 media is working and what type of monitoring
should be performed with residential systems?
Based on the potential health concerns with arsenic, a monitoring program is essential for all POE
systems installed. The designated water dealer or service providers are responsible to test the system
initially after installation to determine if treatment goals are being met and routinely thereafter
throughout the operating life. Sampling frequency may vary depending on the site specifics and state
requirements. A laboratory sample of the effluent is recommended at least quarterly to semi-annually.
Media should be discarded and replaced with new media when the effluent no longer achieves the
treatment goals.
_______________________________________________________________________________
AdEdge :DWHUTechnologies, //&,
5152 Belle Wood Court, Suite A,
Buford, GA 30518 (866) 823-3343 (678) 835-0057 Fax
www.advantedgewater.com
Notice: Information is believed to be reliable and offered in good faith with no warranties or implied warranties or fitness for a particular use. A trained
Water Treatment Professional / Consumer is responsible for determining suitability of application and usage under site-specific circumstances,
environmental conditions and water quality profile. Installation by a qualified mechanical contractor / plumber, and ongoing sampling and monitoring
protocol is required for all installations to determine actual performance and the appropriate frequency of media replacement. AdEdge Technologies, Inc.
neither accepts nor assumes any liability associated with water treatment system design, installation or performance other than as specifically noted in
particular product warranties supplied by AdEdge Technologies, Inc.
AdVantEdge -
Residential Arsenic Reduction Systems
Point-of-Entry Application / Site Profile
AdEdge Water Technologies, LLC
Contact Information
Consumer:
Date (mm/dd/yy) :
Location:
Dealer Contact:
Source of Lead:
Phone:
Competitive Technologies Considered:
Fax:
Desired Istall Date:
Email:
Other pertinent Notes:
System Parameters
Application:
( residential, other POE, commercial, other)
Size / Type:
Single family, multiple family, multiple dwelling)
Design Flow (GPM):
(Max design flow rate)
Ave Flow (GPM):
(Typical demand)
Gallons per day usage:
(Ave throughput per day)
Est. Gals per Year: 0
(Best estimate for 365 day usage)
Softener Installed:
Iron or manganese present above MCL?:
Sulfide odor?:
Existing Treatment at location?:
Water Analysis
(enter all available)
pH **
Tannins**
mg/L
Silica **
mg/L
Sulfides **
mg/L
Alkalinity
mg/L
mg/Las CaCO3
Sulfate
mg/L
Hardness
mg/L as CaCO3
Iron **
mg/L
Turbidity
NTU
Manganese **
mg/L
Phosphate **
mg/L
Vanadium
mg/L
Flouride
mg/L
Total As **
** priority parameters
Contact Info:
As(III)
mg/L
Carolyn Spencer
[email protected]
or: AdEdge Water Technologies, LLC 5152 Bellewood Court, Suite A, Buford, GA 30518
or: fax @ (678) 835-0057 Phone: 678-835-0052
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement