MILWAUKEE

MILWAUKEE
CLASS # 60
3/8” HOLE SHOOTER
For all day drilling and driving in wood, steel, or plastic, there may not
be a better tool than this Milwaukee® Magnum hole shooter. Aluminum and
Magnesium alloy on the gear case cuts down on the tools weight, and a glass
reinforced nylon handle makes it a bit lighter too, but when it comes to great
results, this is the same heavy-duty, no-nonsense tool it's always been.
The handle is designed so you can hold it two ways; either pistol grip or
with the palm of your hand resting on the top back portion, making the drill
an extension of your arm. As a result, you can really get behind it while still
easily reaching the trigger with your fingers. The carbon brushes are easy to
access and change and this model comes with a convenient and reliable all
metal, two-sleeve keyless chuck.
Specifications:
•
•
•
•
•
•
•
•
•
120 Volt/AC Only
5.5 Amps
Variable speed: 0 - 2800 RPM
Removable brush cartridge system
3/8” Keyless chuck
Single gear train
8’ fixed power cord
Length: 10”
Weight: 4 Lbs
ITEM#:
PM0233-20
DESCRIPTION:
3/8” MILWAUKEE MAGNUM HOLE SHOOTER
CLASS # 60
1/2” HOLE SHOOTER
For all day drilling and driving in wood, steel, or plastic, there may not
be a better tool than this Milwaukee® Magnum hole shooter. Aluminum and
Magnesium alloy on the gear case cuts down on the tools weight, and a glass
reinforced nylon handle makes it a bit lighter too, but when it comes to great
results, this is the same heavy-duty, no-nonsense tool it's always been.
This heavy duty drill is built for industrial and construction applications.
It features raw power with a Milwaukee® built 5.5 amp motor, trigger speed
control, reversing, and a Quik-Lok® cord that can be quickly removed from
the drill for storage or service replacement. Use this tool with a variety of
accessories to drill into wood, metal, plastics and composites.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
•
•
120 Volt/AC Only
5.5 Amps
Variable speed: 0 - 850 RPM
Removable brush cartridge system
Industrial 1/2” Chuck (Keyed)
Double gear train
8’ 3 wire Quik-Lok cord
Spindle” 1/2”-20
Trigger lock: On
Length: 10-1/2”
Weight: 4.8 Lbs
Spare brushes inside handle
Includes side handle for left or right
ITEM#:
DESCRIPTION:
PM0234-6 1/2” MILWAUKEE MAGNUM HOLE SHOOTER
CLASS # 60
12V CORDLESS SCREWDRIVER
Milwaukee’s powerful and compact 12 Volt cordless drill/driver features
lithium-ion technology which delivers 150 in.-lbs. of torque while operating
at 0 - 500 RPM, making it 25% more powerful with 30% more run time than
the competition.
A convenient fuel gauge lets you easily see how much battery life is left
and the metal gear housing ensures greater durability and longer tool life. A
built-in LED light illuminates the work area and the 30 minute charger keeps
you working with little to no downtime.
The small compact size gives you the freedom to use a power tool where
not normally accessible with other drill/drivers and it has soft grip sides that
protect surfaces and give it a comfortable grip.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM2401-22
Torque: 150 Inch-lbs.
No Load Speed: 0-500 RPM
Variable Speed Trigger
Spindle Lock
1/4” Hex Quick Change Chuck
Battery Fuel Gauge
Weight: 2.0 Lbs.
Length: 7”
(2) 12Volt Lithium-Ion Batteries
30 Minute Charger
#2 Phillips Bit
Compact Storage Bag
DESCRIPTION:
12 VOLT LITHIUM-ION DRILL/DRIVER
CLASS # 60
DIGITAL INSPECTION CAMERA
With advanced digital imaging technology and a 2.4” high resolution color
LCD display, the M-Spector digital inspection camera provides crystal clear
pictures of tough to reach places. See inside pipes, drains and equipment and
behind walls.
The exclusive image zoom feature and LED brightness control optimizes
image quality and the detachable, 3’ water tight and flexible cable protects
the M-Spector in any jobsite environment.
With 15 hours of run-time and auto shut-off this powerful video inspection
system is extremely portable, letting you discover and diagnose any problem
confidently and efficiently.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM2310-21
High Resolution Digital Picture
Digital Zoom (Up to 200%)
LCD Display: 2.4”
LED Brightness: (3x) Control
Display Resolution: 320 x 240
3’ Expandable Cable
Auto Shut-Off
Run Time: 15 Hours
(1) Compact Lithium-Ion Battery
30 Minute Charger
Carrying Case
DESCRIPTION:
DIGITAL INSPECTION CAMERA
CLASS # 60
12V MULTIMEDIA CAMERA KIT
The Milwaukee® M-Spector AV M12 cordless multimedia camera kit is
the next generation of professional inspection technology. With the addition
of picture, audio and video capabilities, professionals can now inspect and
document issues, download the information to their computer and then send
visual confirmation to a customer or supervisor for review.
Specifications:
• 2 GB Memory Card (Included) Records 90
min. of audio/video or 7,600 photos
• USB Cable For Downloading To Computer
(Included)
• Integrated Microphone and Speaker
• Rotate Both Live and Captured Images
• 4X Zoom
• 4X LED Brightness
• Auto Shut Off
• 3.5” LCD Screen
• Display Resolution: 320 x 240
• (1) M12 Lithium-Ion Battery Included
• Charger & Carrying Case Included
ITEM#:
PM2311-21
DESCRIPTION:
MULTIMEDIA CAMERA KIT – M12
CLASS # 60
FORK METER TESTER
The Milwaukee fork meter is a heavy duty true-RMS electrical tester for
professional residential, commercial and industrial applications. It’s like four
tools in one providing current measurement, voltage measurement, voltage
detection and task lighting.
In addition, this tool provides a wide 0.63” fork opening, high 200amp
current range and a high contrast white-on-black display.
Features:
• Measures up to 200 amps with wide 0.63 jaw opening
• Wide voltage range to 1,000 volts AC/DC
• True RMS for accurate measurement in all applications
• Lo-Z measurement to eliminate ghost voltage
• Built-in voltage detector and LED work light
• High contrast white-on-black display with backlight for
easy reading
• Rugged over-molding increases durability and user grip
• CAT IV 600V / CAT III 1,000 V for greater safety
• Includes (2) AA Batteries
ITEM#:
PM2205-20
DESCRIPTION:
FORK METER ELECTRICAL TESTER
CLASS # 60
FORK METER FOR HVAC/R
The Milwaukee alkaline fork meter for HVAC/R is a great multi-use tool
for electrical and temperature testing. It’s like having five tools in one as it
provides measurements for current, temperature, voltage as well as voltage
detection, and task lighting.
This fork meter is a true RMS electrical tester that is designed for use in
all professional residential, commercial and industrial applications. It has a
high-contrast, black-on-white display for easy viewing and a wide 0.63-inch
fork opening with high 200 amp current range for high performance.
Features:
• Measures up to 200 amps with wide 0.63 jaw opening
• Wide voltage range to 1,000 volts AC/DC
• True RMS for accurate measurement in all applications
• Lo-Z measurement to eliminate ghost voltage
• Built-in voltage detector and LED work light
• Thermocouple (dual banana) input for contact
temperature measurement
• High contrast white-on-black display with backlight for
easy reading
• Rugged over-molding increases durability and user grip
• CAT IV 600V / CAT III 1,000 V for greater safety
• Temperature range of -40° to 752° Fahrenheit
• Includes (2) AA Batteries
ITEM#:
PM2206-20
DESCRIPTION:
FORK METER FOR HVAC/R
CLASS # 60
HVAC LASER TEMP GUN
The M12™ cordless Laser Temp Gun thermometer Kit for HVAC/R is a
heavy duty pistol grip infrared thermometer for professional commercial and
industrial HVAC/R applications.
Powered by a Milwaukee M12 Redlithium™ battery, this tool can safely
measure temperatures between -22 to 1472° F (-30 to 800° C) with a 40 to 1
distance to spot ratio for even the most demanding industrial applications. In
addition, the M12 Laser Temp-Gun™ Thermometer for was designed with
an extra bright LED flood light to increase end user productivity. Covered
by the Milwaukee 5-Year Warranty.
Specifications:
a
a
a
a
a
a
a
a
a
a
Temperature Range: -22° - 1472° F
Accuracy: 1.5%
Distance To Spot: 40 - 1
K-Type Thermocoupler Input: Yes
Display Resolution: 0.1C (0.1F)
Response Time: <500ms
Emissivity: Adjustable 0.10 - 1.00 by 0.01
Alarm: Yes
Locking Trigger: Yes
12V Lithium-Ion Battery & Charger Included
ITEM#:
PM2277-21
DESCRIPTION:
M12 LASER TEMP GUN FOR HVAC/R
CLASS # 60
CLAMP METER
The Milwaukee clamp meter is a heavy duty true-RMS electrical current
tester for professional residential, commercial, and industrial applications. It
is the perfect tool for the professional electrician, providing a wide 1.3” jaw
opening to easily handle large conductors, a thin jaw profile for access to
tight spaces and a high contrast white-on-black display for clearer readings.
In addition, this tool was designed with embedded non-contact voltage
detection and an LED work light to increase end user productivity. Covered
by Milwaukee 5-Year Warranty.
Specifications:
a
a
a
a
a
a
a
a
Voltage Range: 600V AC/DC
Safety Category Rating: CATIII 600V
TRMS: Yes
AC/DC Amps: 600
Ohms: 6 kohms
Switch Type: Dial
LED Worklight
(2) AA Batteries Included
ITEM#:
PM2237-20
DESCRIPTION:
CLAMP METER
CLASS # 60
12V SUB-SCANNER DETECTION KIT
The Sub-Scanner M12 cordless detection tool is a heavy duty pistol grip tool for
professional commercial and industrial applications. Powered by the Milwaukee®
M12 Lithium-Ion battery, it can detect rebar up to 6” deep in concrete, as well as
the location and depth of materials beneath gypsum, ceramic tile and marble.
The M12 Sub-Scanner detection tool was designed with a four wheel design for
durability and smooth, accurate measurement. Includes (1) Lithium-Ion battery, (1)
30 minute charger and carrying case.
• Measures depth and location of rebar up to 6” in
concrete
• Detects location of wood, PEX, PVC and metal
• Differentiates between steel and copper or
aluminum
• Easy read high contrast display
Specifications:
•
•
•
•
•
•
•
Volts: 12
Wood & Metal Stud Depth: 1-1/2”
Plastic Depth: 3”
Non Ferrous Metal Depth: 6”
Ferrous Metal Depth: 6”
Displays all depths
Includes (1) M12 Battery, Charger & Case
ITEM#:
PM2290-21
DESCRIPTION:
M12 SUB-SCANNER DETECTION TOOL
CLASS # 60
12 VOLT HACKZALL™
The M-12 Hackzall™ reciprocating saw puts versatility in the palm of your
hand. With a lightweight compact design, it cuts in more spaces and it offers
personal portability.
The 12 Volt, Lithium-Ion battery gives you the power to cut up to 80 pieces
of 1-1/2” PVC with a single charge and the Quik-Lok® keyless blade change
system accepts both Hackzall™ and Sawzall® blades.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM2420-22
Voltage: 12 Volt
Speed: 0-3000 SPM
Stroke Length: 1/2”
Battery Fuel Gauge
Variable Speed Trigger
All Metal Gear Case
Built In LED Light
Weight: 2.6 Lbs.
Length: 11”
(2) 12V Lithium-Ion Batteries
30 Minute Charger
2 Hackzall Blades
Carrying Case
DESCRIPTION:
HACKZALL™ 12 VOLT RECIP SAW
CLASS # 60
COPPER TUBING CUTTER
A close quarter rotating cutter head cuts installed tubing with as little as
1-1/2” of clearance, and automatically adjusts from 3/8” to 1” diameter. At
500 RPM it cuts up to ten times faster than conventional cutters and makes
up to 200 cuts on a single charge.
It’s corrosion and rust resistant, sealed for water protection and features
uni-body construction for exceptional durability and overload protection for
long life.
Specifications:
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM2471-21
Speed: 500 RPM
Weight: 3.2 Lbs.
Size: 14”
Built-In LED Light
Battery Fuel Gauge
Close Quarter Rotating Head
Water Resistant Gear Case
(1) 12V Lithium-Ion Battery
30 Minute Charger
Carrying Case
DESCRIPTION:
12 VOLT COPPER TUBING CUTTER
CLASS # 60
12V PVC/PEX SHEAR KIT
Cutting faster, cleaner and closer than traditional methods, the new M12
cordless PVC shear utilizes a super sharp stainless steel blade for burr-free
cuts, slices through 2" PVC in as fast as 3 seconds, and offers an offset blade
to cut PVC mounted to a stud or close to a wall.
Powered by the Milwaukee® M12 Lithium-Ion battery, the new PVC
shear is able to cut over 200 times on a single charge.
Specifications:
• Cuts up to 2” schedule 40 PVC in 3 seconds
• Ultra sharp blade with pierce point – no burrs
or shavings to remove
• Offset blade cuts PVC/PEX in-wall, in-ground
or close to wall
• Quick return blade
• All metal planetary drive
• 200 cuts per charge
• Stainless steel blade and aluminum jaw
• Impact and water resistant
• Variable speed trigger
• On board fuel gauge
• (1) M12 Lithium-Ion battery included
• Charger & carrying case included
ITEM#:
PM2470-21
DESCRIPTION:
M12 – CORDLESS PVC/PEX SHEAR KIT
CLASS # 60
DUAL TEMPERATURE HEAT GUN
This professional heat gun has ergonomic style and powerful heating elements.
With stay cool handles and heat shields, you can use this gun all day and still stay
cool. It features 570° and 1000° temperature ranges and it only weighs 1.6 lbs.
Specifications:
•
•
•
•
•
•
•
Dual temperature: 570° and 1,000 ° F
120 Volt
11.6 Amp
Air volume: 14.8 cu. ft./min
Length: 10-1/8”
Unique impact resistant heating element
Efficient soft air velocity increases surface
temperature much faster than conventional
hot air heat guns
• 3 position rocker switch: off, high and low
ITEM#:
PM8975-6
DESCRIPTION:
DUAL TEMPERATURE HEAT GUN
CLASS # 60
1/4” HEX IMPACT DRIVER
Delivering a best-in-class 850 in-lbs. of torque in a compact, lightweight
package weighing less than 2-1/2 lbs, this Milwaukee 1/4” hex impact driver
is powerful enough to drive fasteners up to 75% faster with up to two times
longer run-time.
The compact size and weight allows access to tighter areas and reduces
user fatigue. A 12 volt Lithium-Ion battery and 0-3,000 IPM provide longer
run time and more impacts per minute for optimum performance.
Other features include a battery fuel gauge that displays the remaining
run time and a built-in LED light that illuminates the work surface.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM2450-22
Torque: 850 Inch-Lbs.
Weight: 2.3 Lbs.
Size: 6-1/2”
Built-In LED Light
Battery Fuel Gauge
RPM: 0-2,000
IPM: 0-3,000
Variable Speed Trigger
(2) 12V Lithium-Ion Batteries
30 Minute Charger
Carrying Case
DESCRIPTION:
12 VOLT 1/4” HEX IMPACT DRIVER
CLASS # 60
12V CORDLESS 3/8” DRILL/DRIVER
The M12 Cordless 3/8” drill/driver delivers 250 inch pounds of torque in
a compact, lightweight design. It is the only tool in its class with an all-metal
locking chuck, and it fastens up to 35% faster than the competition.
The on-board fuel gauge displays remaining run-time, and a built in LED
illuminates the work surface. Includes two M12 Lithium-Ion batteries, one
30 minute charger and carrying case.
Specifications:
•
•
•
•
•
•
•
ITEM#:
PM2410-22
2 speeds (0 - 1,500 & 0 – 400)
All metal gear box
250 in. lbs. torque
3/8” single sleeve ratcheting metal chuck
Weight: 2.5 lbs.
Length: 7-3/8”
Integrated LED and fuel gauge
DESCRIPTION:
12V CORDLESS 3/8” DRILL DRIVER
CLASS # 60
CORDLESS 1/4” RATCHET
This 1/4” cordless ratchet is the ideal tool for auto mechanics, maintenance
and repair professionals looking for maximum performance and productivity
in a subcompact cordless tool.
It utilizes a powerful 12-volt motor to produce up to 30 ft-lbs of torque and
250 rpm, giving users the power and speed of a pneumatic ratchet without a
cumbersome airhose.
Specifications:






Volts: 12V
Peak Torque: 30 ft/lbs
No Load Speed: 0 – 250 RPM
Tool Length: 10-3/4”
Tool Weight: 1.9 lbs.
Includes: (1) 12V RedLithium Battery,
(1) Battery Charger & Carrying Case
ITEM#:
DESCRIPTION:
PM2456-21 M12 CORDLESS 1/4” RATCHET KIT
PM2456-20 M12 CORDLESS 1/4” RATCHET (BARE TOOL)
CLASS # 60
40 PC. SCREW DRIVING SET
The Milwaukee 40 piece screw driving set offers best in class performance
and versatility. It includes driver bits for every job no matter what the trade.
Electrical, plumbing, HVAC or general maintenance, this set has a solution
to the most common driving needs.
It features a high quality assortment of screwdriver bits, nut drivers, Torx
bits and more. Made from premium grade S2 tool steel, and comes stored in
a durable, plastic case.
Includes:
Magnetic Nut Setters: 1/4” & 5/16”
Magnetic Drive Guide
Carrying Case
1” Insert Bits:
P1 (3), P2 (8), P3 (4)
Sq #1 (1), Sq #2 (3), Sq #3 (1)
Slotted 6-8 (1), Slotted 8-10 (1)
Torx #15(1), Torx #20(1),
Torx #25(1)
2” Insert Bits:
P1 (1), P2 (3), P3 (1)
Sq #1 (1), Sq #2 (2), Sq #3 (1)
Torx #15(1), Torx #20(1),
Torx #25(1)
ITEM#:
48-32-1505
DESCRIPTION:
MILWAUKEE 40 PC. SCREW DRIVING SET
CLASS # 60
29 PC. IMPACT DRIVER BIT SET
The Milwaukee® Shockwave impact bit set is manufactured with custom
engineered steel and heat treated for high shock resistance. The compression
forged tips provide an ideal fit and reduce breakage.
The ‘shock zone geometry’ of these bits is designed to flex with springlike action and reduce stress on the tips. Comes in a convenient storage case
with snap-in slots to keep bits in place.
Includes:
(1) #1 Phillips Bit 1"
(7) #2 Phillips Bit 1"
(2) #3 Phillips Bit 1"
(2) #2 Phillips Power Bit 2"
(1) #3 Phillips Power Bit 2"
(1) #1 Square Recess Bit 1"
(4) #2 Square Recess Bit 1"
(1) #3 Square Recess Bit 1"
(2) #2 Square Recess Power Bit 2"
(1) T15 Torx Bit 1"
(1) T20 Torx Bit 1"
(1) T25 Torx Bit 1"
(1) T25 Torx Power Bit 2"
(1) 1/4" Hex Red Magnetic Nut Driver
(1) 5/16" Hex Amber Magnetic Nut Driver
(1) 3/8" Hex Blue Magnetic Nut Driver
(1) Magnetic Bit Holder
(1) Case with Bulk Storage Container
ITEM#:
48-32-4401
DESCRIPTION:
MILWAUKEE 29 PC. IMPACT DRIVER BITS
®
CLASS # 60
HAMMER DRILL & IMPACT KIT
At only 9-1/4” long and 5.3 Lbs., the Milwaukee® 1/2” high performance
hammer drill/driver is the most powerful and compact drill/driver available.
The 4-pole frameless motor generates a best-in-class 650 inch-lbs. of torque
and its high capacity battery delivers up to 65% more holes per single charge
to tackle the toughest jobs.
Included with this package is the Milwaukee® 1/4” hex compact impact
driver which delivers 1,400 inch-Lbs. of torque and up to 3,200 IPM making
it one of the most productive and heavy duty drivers you’ll find anywhere.
Drill/Driver Specifications:
•
•
•
•
•
•
•
•
Torque: 650 Inch-Lbs.
Weight: 5.3 Lbs.
Size: 9-1/4”
Built-In LED Light
1/2” Single Sleeve Metal Chuck
High Speed RPM: 0-1,800
Low Speed RPM: 0-450
BPM: 0-28,000
Impact Driver Specifications:
•
•
•
•
•
Torque: 1,400 Inch-Lbs.
Weight: 4.1 Lbs.
Size: 5-3/4”
Built-In LED Light
Tool Belt Clip
Kit Includes:
• (2) 18 Volt Lithium-Ion Batteries
• 1 Hour Charger
• Carrying Case
ITEM#:
PM2611-24P
DESCRIPTION:
18 VOLT DRILL/DRIVER & IMPACT KIT
CLASS # 60
HACKZALL & DRILL/DRIVER KIT
The M-12 Hackzall™ reciprocating saw puts versatility right in the palm
of your hand. With a lightweight compact design, it cuts in more spaces and
it offers personal portability.
The powerful and compact 12 Volt cordless drill/driver delivers 100 in.lbs. of torque while operating at 0 - 500 RPM, making it 25% more powerful
with 30% more run time than the competition.
Hackzall Specifications:
•
•
•
•
•
•
Speed: 0-3000 SPM
Stroke Length: 1/2”
Battery Fuel Gauge
Built-In LED Light
Weight: 2.6 Lbs.
Variable Speed Trigger
Drill/Driver Specifications:
ITEM#:
PM2490-22
•
•
•
•
•
Torque: 150 Inch-lbs.
No Load Speed: 0-500 RPM
Variable Speed Trigger
Battery Fuel Gauge
Spindle Lock
•
•
•
•
Kit Includes:
(2) 12 Volt Lithium-Ion Batteries
30 Minute Charger
(2) Hackzall Blades
Contractor Bag
DESCRIPTION:
12 VOLT HACKZALL & DRILL DRIVER KIT
CLASS # 60
18 VOLT 2-TOOL COMBO KIT
This 18 Volt Milwaukee® tool kit includes two of their popular M18™
Lithium-Ion powered tools. Includes the 1/2” compact drill/driver with 400
in. lbs. of torque and the compact impact driver with 1400 in. lbs. of torque,
the highest torque rating in its class.
The compact drill has a 22 position clutch setting and a single sleeve
ratcheting chuck to ensure a secure bit grip. The impact driver is lightweight
and balanced and 75% faster than its competition.
Both tools have a built in LED light for added visibility and the M18
Lithium-Ion battery delivers longer life and run time with fade-free power.
The batteries also feature a built in fuel gauge that displays the remaining
run time.
Includes:
• 1/2” Compact Drill/Driver w/ 22
position clutch
• Compact Impact Driver w/ 1/4”
hex chuck
• 30 Minute Battery Charger
• (2) 18 Volt Li-Ion Batteries w/
on-board fuel gauge
• (2) Belt Clips
• Impact Resistant Carrying Case
ITEM#:
DESCRIPTION:
PM2691-22 CORDLESS 18V LI-ION 2-TOOL COMBO KIT
CLASS # 60
4 TOOL COMBO KIT
This 18 Volt Milwaukee® tool kit includes 4 popular M18™ items and
comes in a handy carrying bag. The 1/2” hammer drill /driver features the 4pole frameless Milwaukee motor that delivers 550 in-lbs of peak torque, 04,500/0-1,700 RPM & 29,000 BPM.
The M18 cordless Sawzall® features a patented gear protecting clutch,
counter balance mechanism and 0-3,200 SPM. The M18 cordless 6-1/2” saw
delivers 3,500 RPM with magnesium upper and lower guards for maximum
durability.
Lastly, the M18™ cordless work light provides a fold-away hook for
hands free use and a 135° rotating head to direct light to the work area. This
kit also includes two M18 XC high capacity lithium-ion batteries, a 1-hour
charger, and the Milwaukee® carrying bag.
ITEM#:
PM2694-24
DESCRIPTION:
M18™ LI-ION 4 CORDLESS TOOL KIT
CLASS # 60
M12 LI-ION 4-TOOL KIT
When it comes to power, speed and portability in a small package, nothing beats
the new M12 system of cordless tools from Milwaukee®. This innovative system of
cordless tools is precisely scaled to deliver the power, speed or torque required for
professional applications, and they all fit easily into the tool bag.
All M12 tools are powered by 12V Lithium-Ion batteries which offer longer runtime, weigh less, and are environmentally friendly. More portable, more productive
and more power.
Kit Includes:
Work Light, Screwdriver, Copper Tubing Cutter, Hackzall Reciprocating Saw,
(2) Li-Ion Batteries, 30 Minute Charger & Carrying Bag
ITEM#:
PM2490-24
DESCRIPTION:
M12 LITHIUM-ION 4-TOOL COMBO KIT
CLASS # 60
M18 2 TOOL COMBO KIT
This Milwaukee® 2-tool combo kit includes a 1/2” hammer drill driver
and 5-3/8" metal cutting saw. The M18™ cordless system features patented
technology, electronics, innovative motor design, and superior ergonomics
to provide the most efficient blend of power, weight and performance in the
industry.
Powered by the Red Lithium™ M18 cordless system which delivers
more torque, more power and longer run time than the competition. The kit
includes (2) M18 Red Lithium™ batteries, 1-hour charger, Metal Tech™ 30
tooth carbide tipped blade, blade wrench and contractor bag.
ITEM#:
PM2698-22
DESCRIPTION:
M18 2-TOOL COMBO KIT
CLASS # 60
MILWAUKEE ½” HOLE HAWG
This is Milwaukee’s famous ½” hole hawg, a friend to contractors for
years. It has all the power and torque you’ll need in a compact design, so
you can drill between joists and studs with little efforts: (the clearence from
front to back of this drill is only 6 ½”). The spade handle has three different
positions: from the rear of the drill to the top of the drill. The triple reduction
gearing allows you to use the self-feed bits all the way up to 4 5/8”. It also
has a 2-position pipe handle. It’s powered by a 7 ½ amp motor with a 2speed gear shift from 1,200 rpm’s to 300 rpm’s. In addition to the compact
design, the power to weight ratio is the best in the business—the drill only
weighs 11 ½ lbs.
SPEC BOX
120 VOLT A/C ONLY
7.5 AMPS
300/1200 RPM
LENGTH: 6 ½”
WEIGHT: 11 ½ LBS
USA MADE
NO CARRYING CASE
ITEM#
PM1675-6
DESCRIPTION:
MILWAUKEE ½” HOLE HAWG
CLASS # 60
MILWAUKEE ½” RIGHT ANGLE
“D” HANDLE HOLE SHOOTER
The right angle “hole-shooter” will get into tight places—like between
studs and joists—with just 5 ½” of clearance. This drill is well-equipped
with top features like Milwaukee’s tough ½” chuck, variable speed trigger
control from 0–750 rpm’s, and the power of a 7 amp motor. You get the sure
grip “d” handle on the back, and the front handle rotates 360 degrees and
locks in any position. The whole drive unit will also rotate 360 degrees, so
that all drilling positions are possible. The right angle hole-shooter has
helical cut, case hardened gears in a quadruple gear train for maximum
power transfer. This tool solves a lot of problems and still has the power for
self-feed bits all the way up to 4 5/8”. Also included are all the wrenches, the
chuck key, the holder, and the red steel carrying case.
SPEC BOX
120 VOLTS AC ONLY
7.0 AMPS
VARIABLE SPEED
0-335 RPM - LOW
0-750 RPM – HIGH
QUAGRUPLE GEAR TRAIN
WEIGHT: 21 ½ LBS
ITEM#
PM3107-6
DESCRIPTION:
MILWAUKEE ½” RIGHT ANGLE DRILL KIT
CLASS # 60
MILWAUKEE 1 1/8” ROTARY HAMMER
This is Milwaukee’s powerful 7.6 amp rotary hammer that uses SDS bits
up to 1 1/8”. It includes three different operation modes: rotation with a
hammer drive, hammer action only, and drill rotation only. This drill can be
used for heavy duty hammer drilling, for chiseling, and for straight drilling.
The high tech planetary gears make this drill compact and provides
maximum power transfer. The variable speed trigger gives you 0–999 rpm’s
and 0–4,400 blows per minute. The “d” handle allows for maximum
pressure and the cushioned handle grip absorbs the vibration and reduces
fatigue.
This drill will do any job that you’ve got all the way to 1 1/8” in hardened
concrete, 5/8” in steel, and up to 1 1/2” in wood…and it’ll even take core bits
all the way up to 3 1/2”. Also included with this drill is the depth gauge,
quicklock bit system, and Milwaukee’s rugged, red steel carrying case.
SPEC BOX
120 VOLT AC ONLY
7.6 AMPS
0-999 RPM
0-4,400 BPM
LENGTH: 15”
WEIGHT: 10.1 LBS
USA MADE
CARRYING CASE
ITEM#
PM5303-20
DESCRIPTION:
MILWAUKEE 1 1/8” ROTARY HAMMER DRILL
CLASS # 60
MILWAUKEE ¾” ROTARY HAMMER
“FALCON” SDS-PLUS
This Milwaukee ¾” rotary hammer uses SDS bits for easy bit changes
without using extra tools. This drill is 15 inches long with a “D” handle in
the rear and a fully adjustable side handle that can be rotated 360 degrees
and lock into position. It has a powerful 6 amp motor with a variable speed
trigger from 0–1,100 rpm’s and 0–5,000 blows per minute in the hammer
mode. You get up to ¾” capacity with solid bits and up to 1 ¾” capacity
with core bits. This heavy duty rotary drill also has Milwaukee’s 3-wire
quicklock cord set for easy detachment, tangle free carring, and quick field
repair. Also included is a depth gauge and a red steel carrying case.
SPEC BOX
120 VOLT AC ONLY
6.5 AMPS
0-1,100 RPM
0-5,000 BPM
LENGTH: 13”
WEIGHT: 4.8 LBS
USA MADE
CARRYING CASE
ITEM#
PM5368-6
DESCRIPTION:
MILWAUKEE ¾” ROTARY HAMMER USA
CLASS # 60
MILWAUKEE ½” HAMMER DRILL
Milwaukee’s ½” hammer drill is one of the best values in heavy duty
hammer drills on the market for all purpose work. It is a pistol grip hammer
drill that drills in concrete or masonry up to 7/8” holes or drill in steel up to
½” and in wood up to 1 ½”. The 6.5 amp ball bearing motor will gives 0–
1,350 rpm’s in the low setting or 0–3,200 rpm’s in the high setting, and
when using the hammer drill setting, this drill will gives 0–52,000 blows per
minute in the high setting. Also included is the side handle and depth gauge.
SPEC BOX
120 VOLT AC ONLY
6.5 AMPS
0-1,350 RPM LOW 0-3,200 RPM HIGH
0-22,00 BPM LOW 0-52,00 BPM HIGH
LENGTH: 13”
WEIGHT: 4.8 LBS
NO CARRYING CASE
ITEM#
PM5378-20
DESCRIPTION:
MILWAUKEE ½” HAMMER DRILL
CLASS # 60
CORDLESS SCREWDRIVER
The Milwaukee® 2.4 volt, 2-speed screwdriver has an adjustable 6 position
clutch and two speed ranges: 0-200rpm and 0-400rpm. This lightweight, 14
ounce screwdriver is ideal for electricians, installers, assembly line workers,
auto mechanics, and general home maintenance.
For comfort and convenience in tight locations, this tool has a 2 position
handle, and is compact enough to fit into a pocket or contractor belt pouch.
It has a switch for both forward and reverse and includes a 2.4 volt battery
and a one hour charger.
Specifications:
•
•
•
•
•
•
•
2.4 Volt
Reversible
Length: 9-3/4”
Weight: 2.8Lbs.
2 Speeds: 0-200 RPM &
0-400 RPM
Torque: 3.5 to 26 Inch Lbs.
Includes 2.4 Volt Charger
and 1 Hour Charger
ITEM#:
PM6546-6
DESCRIPTION:
2.4 VOLT CORDLESS SCREWDRIVER
CLASS # 60
MILWAUKEE DRYWALL
SCREW SHOOTER
This drill is a heavy duty, top of the line drill made by Milwaukee. It has
variable speed from 0–4,000 rpm. It is double insulated and lightweight. It
has a triple sealed output spindle and the profile on the nose locator is very
slim, so the desired depth is kept when removing and re-attaching the nose.
Also, it has a very quiet fan design, and it comes with a heavy duty belt clip.
SPEC BOX
2.4 VOLTS DC
SPEED:
0-200 RPM – LOW
0-400 RPM – HIGH
LENGTH: 9 3/8”
WEIGHT: 7/8 LBS
DIAMETER: ¼”
NO CARRYING CASE
ITEM#
PM6758-6
DESCRIPTION:
DRYWALL SCREW-SHOOTER
CLASS # 60
14” CUTOFF SAW
User-friendly and extremely stable, Milwaukee's 14-inch Abrasive CutOff Machine gets the job done fast. It's the only machine on the market that
requires no tools for adjusting the back fence or for changing abrasive
wheels.
It’s equipped with a beefy, 5.4 HP motor which provides ample power
for the tougher jobs and it has a heavy-duty, cast aluminum base with a 1/4”
reinforcing plate, which means more stability and optimal support. The vise
and back fence are made of 3/8” cast iron for solid guidance and straighter
cuts.
Featuring the largest cutting capacity in its class, Milwaukee equipped
this cutoff saw with a horizontal ‘D’-handle that feels good in hand whether
the tool is on the ground or on a bench. Your purchase is covered by a 5-year
warranty.
Specifications:
•
•
•
•
•
•
•
•
ITEM#:
PM6180-20
120V AC/DC-15 Amp
5.4 HP - 3,900 RPM
45° Bevel Capacity
5 3/8” in Pipe
5” in Square Stock
8” Max. Opening
Length: 19 1/4”
Weight: 49.5 Lbs.
DESCRIPTION:
MILWAUKEE 14” CUT-OFF SAW
CLASS # 60
MILWAUKEE PORTABLE BANDSAW
Milwaukee’s electric, portable band saw can quickly cut any length
material. This saw weighs 16 lbs., and easily handles round stock, like pipe
and conduit; and tubing like pvc, to a full 3 ½”. With rectangular stock, the
capacity is 3 ½ x 4 ½. It has a powerful 6 ½ amp motor that powers the
blade at two speeds: 200 and 250 surface feet per minute.
An all ball bearing blade guide for precision cuts without “twisting” the
blade. The gear drive is lubricated for life. No oiling required! It is equipped
with a t-handle in the front for maximum control. Milwaukee’s portable
bandsaw is heavy duty and versatile.
SPEC BOX
120 VOLT AC ONLY
200/250SFM
6.5 AMP
CAPACITY:
ROUND – 3 ½
RECTANULAR 3 ½ X 4 ½
LENGTH: 20”
WEIGHT: 16 LBS
MADE IN USA
NO CARRYING CASE
ITEM#
PM6225
DESCRIPTION:
MILWAUKEE PORTABLE BANDSAW
CLASS # 60
PORTABLE BAND SAW
The Milwaukee® compact, portable band saw is 45% lighter than the deep
cut band saw and at just 9.5 lbs. it is perfect for overhead and tight spaces. It
has a 3-1/4” cutting capacity for cutting the most common materials used by
electricians, plumbers and other mechanical applications.
It will make a single pass cut on 3” copper, 3” angle iron, 2-1/2” conduit
and has a variable speed dial to adjust the speed for more accurate cuts or for
harder materials.
This saw also features a tool-free adjustable material shoe to adjust for a
flush cut when working with installed materials against walls and ceilings
and a built in LED work light illuminates the cut line in tight spaces and any
dark areas.
Specifications:
•
•
•
•
•
•
•
•
•
Voltage: 120 (AC only)
Amps: 7.0
SFPM: 200-360
Max Capacity: 3-1/4” x 3-1/4”
Blade length: 35-3/8”
Cord length: 8’
Weight: 9.5 lbs.
Length: 16”
Includes: 1 blade &
carrying case
ITEM#:
PM6242-6
DESCRIPTION:
MILWAUKEE® COMPACT BAND SAW
CLASS # 60
18 VOLT CORDLESS SAWSALL
“THE HATCHET”
These Milwaukee sawsalls are called “The Hatchet” because they’ll
power through almost any material with ease. The handle pivots down in six
different positions…so, it can be used straight on like a regular corded
sawsall, or it can ratchet and lock it into 6 positions—including the “pistol
grip” position. These positions enable access to super tight areas where a
regular sawsall won’t go.
It has the same ¾” stroke length with orbital action and it is counterbalanced for smooth operation. It has variable speed from zero to 2,700
strokes per minute. It has a “soft-grip” handle to reduce fatigue and the hand.
The hold area behind the blade is specially rubberized to reduce vibration.
One 18 volt reversible battery, the patented one-hour quick charger, and
Milwaukee’s heavy duty “quik-lok” blade clamp that allows you to
interchange blades quickly without additional tools is included with this
sawsall. It also comes with a red plastic carrying case and two axe blades!
ITEM #
PM6514-21
DESCRIPTION:
18 VOLT CORDLESS SAWSALL
CLASS # 60
MILWAUKEE JIG-SAW
Milwaukee’s new jigsaw packs more power and featurs to makes your
job easier. This jigsaw now has a 5.7 amp motor instead of a 3.5 amp motor.
It has four adjustment levels with an orbital action for faster cutting.
Milwaukee’s “quick-lok” blade change system requires no tools. No more
fumbling around looking for hex keys in the tool box! It comes with a full 1”
stroke on the blade and variable speed from 450 to 3,100 strokes per minute.
It also has a tilting shoe for angle cuts to 45 degrees. This jigsaw uses the tshank blades for wood or metal and it comes with Milwaukee’s red carrying
case.
(Note: this unit has a dust collection port,
but does not include a vacuum bag)
SPEC BOX
120 VOLT AC ONLY
5.7 AMP MOTOR
VARIABLE 450 – 3,100 SPM
LENGTH: 11 ¾”
WIDTH: 3”
HEIGHT: 9 ¼”
WEIGHT: 5 1/3 LBS
ITEM#
PM6266-21
DESCRIPTION:
MILWAUKEE JIG SAW
CLASS # 60
MILWAUKEE 7 ¼” CIRCULAR SAW
These Milwaukee circular saws have a full 15 amp motor, and will get up
to 3¼ horse power. These are “workhorse” saws that cut fast and
accuratley—without bogging down. They cut like butter in any kind of
situation: knotty old lumber, dense material like plywood, and it glides
through “green” or wet lumber.
These Milwaukee saws have a magnesium shoe that’s lightweight and
extra wide for stability. They even give the shoe a special coating so it
reduces the friction.
The best feature is the extra bevel stop at 50 degrees—most saws only
have the 45 and 90 degree stops. It’s great for working with roof rafters,
joists, and trusses. You get quick and accurate depth adjustments with
oversized knobs and a positive locking lever, and the rip scale is cast right
into the shoe for accurate measurements from the blade to either side of the
saw.
Milwaukee’s circular saw is center-balanced for better control and less
fatigue. And, no more looking for the blade wrench—it locks into it’s own
compartment right on the shoe.
SPEC BOX
120 VOLT AC/DC
15 AMP
3 ¼” H.P.
5,800 RPMS
5/8” ARBOR
WEIGHT: 11.5 LBS
NO CARRYING CASE
ITEM#
PM6375-20
DESCRIPTION:
MILWAUKEE H.D. 7 ¼” CIRCULAR SAW
CLASS # 60
WORM DRIVE SAW
The hardened steel worm gearing of this Milwaukee circular saw provides
maximum torque in the toughest applications. The powerful, 2.6 HP motor is
designed for maximum cutting performance without bogging down, and the
Magnesium construction makes this saw extremely durable and lightweight.
Features a composite shoe which will not warp, bend or kick up burrs and
a folding rafter hook which allows for quick, convenient storage on a rafter,
joist or nail.
Highly visible depth and bevel scales can be seen from behind saw body
allowing for accurate adjustments and an oil site gauge lets the user instantly
gauge oil levels.
Specifications:
a
a
a
a
a
a
a
a
a
a
ITEM#:
PM6477-20
15 Amp Milwaukee Motor
Operates at - 0 - 4,400 RPM
120 Volts
2.6 Horsepower
7-1/4” Diameter
Bevel Capacity: 0-51.5
12’ Cord Length
Weight: 14.3 Lbs.
24 T Carbide Blade Included
Blade Wrench Included
DESCRIPTION:
MILWAUKEE WORM DRIVE 7-1/4” SAW
CLASS # 60
TILT-LOK CIRCULAR SAW
Whether you're in the market for your first 7-1/4” circular saw or looking
to replace an old one, this saw is worth a look. Powered by a 15amp, 3.25 hp
motor, this saw starts smoothly, cuts evenly, and will handle virtually any
material with ease.
The lightest-weight saw in its class, it’s definitely built with the user in
mind. The Milwaukee exclusive, eight-position Tilt-Lok handle provides
optimized comfort and control in a wide variety of applications. A one-touch
spindle lock button makes blade changes a snap. Features easy access depth
and bevel adjustments, a full 50° bevel capacity, and a clear line of sight to
make it easy to get an accurate cut every time.
Specifications:
a
a
a
a
a
a
a
a
a
ITEM#:
PM6390-21
PM6390-20
Volts: 120
Amps: 15
Blade Size: 7-1/4”
Horsepower: 3.25
No Load Speed: 5,800
Depth of cut at 90°: 2-7/16”
Depth of cut at 50°: 1-11/16”
Depth of cut at 45°: 1-13/16”
Includes: Carbide Blade, Hex
Wrench, Impact Resistant
Carrying Case (PM6390-21
only)
DESCRIPTION:
MILWAUKEE TILT-LOK 7-1/4” SAW W/ CASE
MILWAUKEE TILT-LOK 7-1/4” SAW (NO CASE)
CLASS # 60
LEFT BLADE CIRCULAR SAW
This Milwaukee® circular saw features a patented adjustable main handle
that provides users with maximum control and comfort. The handle position
can be moved to eight different positions for the best ergonomic grip. Both
front and rear handles have cushioned grips.
It has superior cut visibility for right hand users with the blade mounted
on the left side of the saw. At 10.4 lbs and featuring a powerful Milwaukee
built 15 amp motor, this saw provides a maximum 3.25 horsepower.
The aircraft aluminum shoe resists bending and easy to reach depth and
bevel adjustment knobs allow bevels to 50°, exceeding the bevel capacity of
worm drive saws by 5°.
Specifications:
a
a
a
a
a
a
a
a
a
a
ITEM#:
PM6391-21
Volts: 120
Amps: 15
Blade Size: 7-1/4”
Arbor Size: 5/8”
Horsepower: 3.25
No Load Speed: 5,800
Depth of cut at 90°: 2-7/16”
Depth of cut at 50°: 1-11/16”
Depth of cut at 45°: 1-13/16”
Includes: Carbide Blade, Hex
Wrench, Impact Resistant
Carrying Case (PM6390-21
only)
DESCRIPTION:
MILWAUKEE 7-1/4” SAW W/ LEFT BLADE
CLASS # 60
MILWAUKEE 10” COMPOUND
MITER SAW
Milwaukee’s “magnum” compound miter saw has all the power and
features needed in the shop or in the field. A powerful 15 amp motor
delivers 4,800 rpms with an electric brake that’ll save time and provide
safety.
This saw can cut miter angles from 51 degrees left to 59 degrees right,
with positive stops at 0, 15, 22.5, 30, and 45 degrees (both left and right).
Bevel cuts can be made from 50 degrees left to A 3 degrees right. There’s a
non-slip locking system with the miter table evenly rotating on steel ball
bearings, in pre-stressed metal base. It has a clearence of 3 1/2” x 3 7/8”, and
can cut 4 x 4’s at 90 degrees and at 45 degrees. The capacity is 3 ½”x 2 3/4”.
And, the capacity at 45 degrees by 45 degrees compound is 2 ¾” x 2 ¼”.
The clear lower guard retracts automatically as you lower the blade onto
the material. It comes with a base extension on the left side for more work
support, and the scales are easy to read. You also get a 10” carbide tipped
saw blade and the blade wrench.
SPEC BOX
120 VOLTS AC ONLY
15 AMPS
4,800 RPMS
5/8” ARBOR
WEIGHT: 37.5 LBS
MADE IN USA
ITEM#
PM6494-6
DESCRIPTION:
MILWAUKEE 10” COMPOUND MITER SAW
CLASS # 60
MILWAUKEE 10” SLIDE
COMPOUND MITER SAW
Milwaukee’s sliding compoud miter saw combines the versatility of
larger cutting capacities as well as wider miter angles. It can cross cut
material 12” wide and 3 ½” thick at a 45 degree miter. And, at a full 45
degree by 45 degree compound, it can cut all the way up to 8 ¾” wide and 2
1/8” deep.
The accuracy of this saw is dependable. It has dual, hardened steel, guide
tubs. It’s all ball bearings, and has a non-slip, locking system for the saw and
the rotating miter table.
It is well equipped with a powerful 15 amp motor with an electric brake
that eliminates free blade spin. It has an extra tall flip fence and easy to read
scales. There’s a unique override mechanism that allows for fine tune
adjustments near the pre-set miter angles. The miter angles go up to 59
degrees right and 51 degrees left. There are positive stops at 0, 15, 22.5, 30
and 45 degrees, and bevel angle from 3 degrees right to 45 degrees left.
SPEC BOX
120 VOLTS AC ONLY
15 AMPS
4,800 RPMS
5/8” ARBOR
WEIGHT: 52 LBS
MADE IN USA
ITEM #
PM6496-6
DESCRIPTION:
MILWAUKEE 10” SLIDE COMPOUND MITER SAW
CLASS # 60
MILWAUKEE ELECTRIC SAWZALL
This Milwaukee sawzall was manufactured by Milwaukee Electric in
Wisconsin. They are the company that invented the Sawzall®. This popular
model features the 5.5 amp motor and it is variable speed 0 to 2,400 strokes
per minute with a 3/4” stroke.
The pivot shoe is adjustable for versatility and the blade clamp has the
exclusive ‘Quik-Lok’ system for quick blade changes. It features all ball and
roller bearings for a long service life and has an 8” power cord positioned to
allow easier plunge cuts in the work surface without getting in the way.
This is the ideal tool for contractors, electricians and plumbers. There is
no need to drill a starting hole for plunge cuts into flooring or walls. The red,
steel case, two blades, blade clamp and hex key are included. Made in the
USA.
ITEM#:
PM6509-6
DESCRIPTION:
MILWAUKEE SAWZALL®
CLASS # 60
SUPER SAWZALL
Milwaukee’s new Orbital ‘Super Sawzall’ has a high-powered 13 amp
Milwaukee built motor for a fast orbital cutting action and the variable speed
trigger provides 0–3,000 strokes per minute with a 1 1/4” stroke.
The Super Sawzall is counter-balanced for a much smoother operation
with less vibration and the gear protecting clutch allows the saw to withstand
impacts, lengthening the life of the tool.
The Quik-Lok blade clamp provides fast and easy blade changes, and an
impact resistant carrying case provides enough room to store a variety of
accessories. ‘Sawzall®’ is a registered trademark of Milwaukee.
Specifications:
a
a
a
a
a
a
a
a
a
ITEM#:
PM6536-21
13 Amp Milwaukee Motor
Orbital Cutting Action
Variable Speed - 0 - 3,000
1-1/4” Stroke
Counter-Balanced
Gear Protection
Quik-LokTM Blade Clamp
Carrying case Included
2 Sawzall Blades Included
DESCRIPTION:
MILWAUKEE SUPER SAWSALL
CLASS # 60
4-1/2” ANGLE GRINDER
The Milwaukee® 10.0 Amp trigger grip grinder with lock on delivers top
performance, durability and an ease-of-use feature for industrial users. The
trigger grip handle with lock on increases productivity by providing optimal
control, reach and leverage for a variety of applications.
The 10 Amp, 1250 MWO motor provides high overload protection and
power for the toughest jobs. Milwaukee's built in advanced airflow system,
including debris baffles and multi-port exhaust, extends tool life and the 3position soft grip handle gives the user flexibility when performing different
applications.
The top handle position is ideal for cutting. The tool free burst resistant
guard allows the user to quickly adjust the guard without the use of a tool.
External brush doors reduce service time.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM6122-30
Wheel diameter: 4-1/2”
Switch type: Trigger w/lock-on
RPM: 10,000
Max watts out: 1250 MWO
Amps: 10
Multi port exhaust system
Spiral bevel gears
Cord: 8’ x 2 wire
Weight: 5.6 lbs
Length: 16”
Includes: Side handle, Type 27
guard, spanner wrench &
flanges
DESCRIPTION:
MILWAUKEE 4-1/2” ELECTRIC GRINDER
CLASS # 60
4-1/2”/5” ANGLE GRINDER
This 12.0 Amp small angle grinder with lock-on delivers performance,
durability and ease-of-use features for industrial users. The X-large paddle
switch increases comfort when operating in various positions and a 12 Amp,
1490 MWO motor provides high overload protection and power for even the
toughest jobs.
Milwaukee's advanced electronics provide the highest performance with
features like electronic shutoff, overload limit protection and constant power
technology. A built in advanced airflow system, including debris baffles and
multi-port exhaust, extends tool life and the tool-free, burst resistant guard
allows the user to quickly adjust the guard without the use of a tool.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
Wheel diameter: 4-1/2” or 5”
Switch type: Paddle w/ lock-on
RPM: 10,000
Max watts out: 1490 MWO
Amps: 12
Multi port exhaust system
Spiral bevel gears
Cord: 8’ x 2 wire
Weight: 5.7 lbs
Length: 12.6”
Includes: Side handle, 4-1/2”
& 5” Type 27 guard, spanner
wrench & flanges
ITEM#:
DESCRIPTION:
PM6116-30 MILWAUKEE 4-1/2” / 5” ELECTRIC GRINDER
CLASS # 60
7”/9” ELECTRIC GRINDERS
These 15.0 amp large angle grinders deliver performance and durability
for the most difficult grinding jobs. A 4.2 HP motor provides high overload
protection and power and the tool-free burst resistant guard allows the user
to quickly adjust the guard without the use of a tool. Both a 7" and 9" Type
27 grinding guard are included for greater productivity.
Debris baffles protect the internal components by deflecting damaging
debris out of the airflow at the intake vents and external brush doors reduce
service time by providing easy access to brushes. The soft-grip main handle
provides better control and comfort. This grinder is available with or without
‘lock-on’ which keeps the power switch on for less user fatigue.
Specifications:
•
•
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM6088-30
PM6088-31
Wheel Diameter: 7” or 9”
Voltage: 120 AC/DC
Amperage: 15 Amp
Max Horse Power: 4.2 HP
No Load RPM: 6,000
Gears: Spiral Bevel
Exhaust System: Multi-Port
Cord Length: 8’
Length: 21”
Weight: 13.7
Spindle: 5/8”-11 Thread
Includes: 7” & 9” Guards, Side
Handle, Spanner Wrench & Flanges
DESCRIPTION:
7”/9” ELECTRIC GRINDER WITH LOCK-ON
7”/9” ELECTRIC GRINDER NO LOCK-ON
CLASS # 60
MILWAUKEE 7” POLISHER/BUFFER
Milwaukee put power and balance in a lightweight, industrial polisher.
Special features include the exclusive electronic speed control from 0–2,800
rpm, a 11 amp motor, and an all ball bearing. This buffer has all helical
gearing in a lightweight aluminum gear housing with protective urethane
bumpers.
It has a spring loaded spindle lock, a self-stopping brush system to
prevent bur-out, and Milwaukee’s quick-lok 10’ cord that detaches from the
polisher at the base for tangle-free carring and storage.
The Milwaukee polisher is great for any application and is built for
professional use with speed standard liquid machine polishes.
SPEC BOX
120 VOLT AC
11 AMPS
0-2,800 RPMS
LENGTH: 16 ½”
WEIGHT: 8 ¾
NO CARRING CASE
ITEM#
PM5540
DESCRIPTION:
MILWAUKEE 7” POLISHER/BUFFER
CLASS # 60
V28  SAWZALL® RECIP SAW
Unlike NiCad batteries, the Milwaukee® V28 Li-ion batteries maintain
their power level throughout their entire discharge cycle. The last cut or hole
drilled is as powerful as the first. This means more productivity per battery.
The 28 Volt, 3.0 Amp-Hr. battery has up to two times the run time of a
comparable 18 Volt, 2.4 Amp-Hr NiCad pack and it is lighter in weight than
18 Volt NiCad and NiMH packs. They can be recharged at any time without
creating a memory effect, regardless of the current charge level of the pack.
The V28 Milwaukee Sawzall® has 28 Volt power
at the same weight as an 18 Volt Ni-Cad powered
saw. It features a 1-1/8” stroke, 0/2,000 to 0/3,000
SPM for extremely fast cutting and it feels and cuts
like a corded saw.
The tool free, adjustable shoe quickly adjusts the
blade depth, and it has a rugged, metal Quik-Lok™
blade clamp for fast, tool-free blade changes.
A comfortable non-slip, soft-grip handle reduces
vibration and user fatigue and it also features a two
finger variable speed trigger and a high / low speed
selector switch with lock.
Accepts all standard 1/2” shank Sawzall® blades.
ITEM#:
PM0719-22
DESCRIPTION:
V28 1-1/8” SAWZALL RECIP SAW

Super Sawzall Blades, (2) Lithium-Ion Battery Packs, One Hour Lithium-Ion
Charger, and Impact Resistant Carrying Case.
CLASS # 60
V28  1/2” RIGHT ANGLE DRILL
Unlike NiCad batteries, the Milwaukee® V28 Li-ion batteries maintain
their power level throughout their entire discharge cycle. The last cut or hole
drilled is as powerful as the first. This means more productivity per battery.
The 28 Volt, 3.0 Amp-Hr. battery has up to two times the run time of a
comparable 18 Volt, 2.4 Amp-Hr NiCad pack and it is lighter in weight than
18 Volt NiCad and NiMH packs. They can be recharged at any time without
creating a memory effect, regardless of the current charge level of the pack.
The Milwaukee 1/2” right angle drill features a
360° swivel head that can be easily locked tight in
any position.
It has a comfortable, non-slip, soft-grip handle
which reduces vibration and fatigue as well as the
two-finger, variable speed trigger with an easy to
reach reversing lever.
The powerful 28Volt motor delivers 1,081 inch
pounds of maximum torque in low gear, which will
drill up to a 2-9/16” hole in a 2 x 4 with a self feed
bit. And, with the new V28 power pack, every hole
drilled feels as powerful as the first.
ITEM#:
PM0721-21
DESCRIPTION:
V28 1/2” RIGHT ANGLE DRILL

Includes: Side Handle, Chuck Key, (2) Lithium-Ion Battery Packs, One -Hour
Lithium-Ion Charger, Impact Resistant Carrying Case.
4-1/2” GRINDER/CUT-OFF TOOL
The newest addition to the Milwaukee® V28 line of cordless power tools
is this robust, 4-1/2” grinder and cutter. The powerful 28 volt motor delivers
8,000 rpm for faster cutting and grinding than any other cordless grinder and
with Milwaukee’s new V28™ Li-Ion battery, it will deliver about 3 times as
many cuts.
The over load protection feature combined with the soft start mechanism
helps extend the overall tool life, ensuring a more durable tool. It is compact
and lightweight allowing you to work longer between rests as well as access
into areas unheard of with traditional grinders.
A large spindle lock makes wheel replacement quick and easy and a five
position, tool-free guard makes guard adjustments a snap. With all the other
features such as a built in fuel gauge to see when the batteries need charging
it is easy to see why this cordless angle grinder will soon be the leader in it's
class.
Specifications:
•
•
•
•
•
•
Voltage: 28V DC
No Load Speed: 8,000 RPM
Spindle Size: 5/8” x 11
Switch Type: Slide On
Weight: 6.8 Lbs.
Length: 14”
Includes:
Tool, Grinding Guard, Grinding Wheel,
Cut-Off Guard, Cut-Off Wheel, Wrench,
Flanges, V28 Li-Ion Battery Pack, Charger,
Contractor Bag
ITEM#:
PM0725-21
DESCRIPTION:
MILWAUKEE V28 GRINDER/CUT-OFF TOOL
CLASS # 60
12V & 18V BATTERIES
Lithium-ion batteries deliver longer life and run-time with fade-free power. They
are ergonomic, compact and have a lightweight design for comfort. For use with
Milwaukee 12-volt and 18-volt tools and accessories.
12 VOLT LITHIUM-ION BATTERY
•
•
•
•
•
1.4 amp hour
Lightweight. 65% lighter than NiCd batteries
Compact. 50% smaller than NiCd batteries
Lithium-Ion delivers longer life and run time
Fade Free Power
ITEM#: PM48-11-2401
M12 XC LI-ION BATTERY PACK
•
•
•
•
•
For Milwaukee M12 cordless tools
High current discharge for increased power
Rubber over molded base to prevent marring
Lithium-Ion delivers longer life and run time
Fade Free Power
ITEM#: PM48-11-2402
18 VOLT LITHIUM-ION BATTERY
•
•
•
•
•
1.4 amp hour
Digital power management
Discharge protection
Lithium-Ion delivers longer life and run time
Fade Free Power
ITEM#: PM48-11-1815
18 V HIGH CAPACITY BATTERY PACK
•
•
•
•
•
For Milwaukee M18 cordless tools
High current discharge for increased power
Discharge protection
Lithium-Ion delivers longer life and run time
Fade Free Power
ITEM#: PM48-11-1828
CLASS # 60
V28  PORTABLE BAND SAW
Unlike NiCad batteries, the Milwaukee® V28 Li-ion batteries maintain
their power level throughout their entire discharge cycle. The last cut or hole
drilled is as powerful as the first. This means more productivity per battery.
The 28 Volt, 3.0 Amp-Hr. battery has up to two times the run time of a
comparable 18 Volt, 2.4 Amp-Hr NiCad pack and it is lighter in weight than
18 Volt NiCad and NiMH packs. They can be recharged at any time without
creating a memory effect, regardless of the current charge level of the pack.
The V28™ Milwaukee® portable
band saw cuts and feels like a corded
saw and with the V28™ power pack,
even the last cut is as powerful as the
first.
This deep cut saw has a 4-3/4” by
4-3/4” cutting capacity and will make
over 200 cuts of 1” conduit with each
battery charge.
The blade tightening lever with a
long life cam provides quick and easy
blade changes and the LED light aids
cutting visibility.
Features high/low speed selector
with lock, two finger trigger for speed
control and, as with all V28™ cordless
tools the non-slip, soft-grip handle for
reduced vibration and more comfort.
ITEM#:
PM0729-21
DESCRIPTION:
V28 PORTABLE CORDLESS BAND SAW

Includes: 14 TPI Milwaukee Band Saw Blade, (1) 28V Lithium-Ion Battery Pack,
One Hour Lithium-Ion Charger and Impact Resistant Carrying Case.
CLASS # 60
DEEP CUT BAND SAW
The Milwaukee M18 cordless band saw features a Powerstate™ brushless
motor for increased cutting speed through even the toughest applications. It
also features Jobsite Armor Technology™ composite material and crush
zone barriers for long lasting rugged protection.
All metal direct drive delivers maximum tool life with less servicing than
a chain drive and the Redlithium™ XC 4.0 battery provides superior pack
construction, more work per charge and more work over the life of the pack
than competitive batteries.
Specifications:
Voltage: 18V
Length: 21”
Weight: 15 Lbs.
Capacity: 5” x 5”
Band Saw Blades: PB44811
Includes: (2) M18 Redlithium Compact Batteries M18/M12 MultiVoltage Charger Battery Charger & Carrying Case
ITEM#:
PM2729-21
DESCRIPTION:
M18 CORDLESS DEEP CUT BAND SAW
CLASS # 60
M18 & M12 MULTI CHARGER
Always be ready for your next job with this cross-system charger. The
M18 & M12 multi-voltage charger accepts all M18 and M12 batteries, so
you’ll always be prepared and productive, especially on jobs that require a
mix of M12 and M18 Milwaukee cordless power tools.
This versatile unit charges batteries sequentially, reducing your time
to manage charge cycles. It communicates directly with the battery pack to
monitor cell voltage, temperature and charge status to ensure a full charge.
Power up your Milwaukee compact batteries in 30 minutes and extended
capacity batteries in 60 minutes, without the need for extra chargers on the
jobsite.
ITEM#:
PM48-59-1812
DESCRIPTION:
M18 & M12 MULTI VOLTAGE CHARGER
CLASS # 60
V28  6-1/2” CIRCULAR SAW
Unlike NiCad batteries, the Milwaukee® V28 Li-ion batteries maintain
their power level throughout their entire discharge cycle. The last cut or hole
drilled is as powerful as the first. This means more productivity per battery.
The 28 Volt, 3.0 Amp-Hr. battery has up to two times the run time of a
comparable 18 Volt, 2.4 Amp-Hr NiCad pack and it is lighter in weight than
18 Volt NiCad and NiMH packs. They can be recharged at any time without
creating a memory effect, regardless of the current charge level of the pack.
The V28™ Milwaukee® cordless
6-1/2” circular saw feels and cuts like
a corded saw with more power than a
24V saw, yet is lighter in weight.
The powerful 28V motor delivers
4,200 RPM for fastest cutting and the
electric brake stops blade in less than
2 seconds for fast repetitive cuts.
Both upper and lower guards are
made of lightweight magnesium for a
high resistance to impact and the 50°
bevel capacity easily adjusts for wider
range of cuts.
The lightweight aluminum shoe
reduces fatigue yet is rugged enough
for the job site and as with all V28™
cordless tools, it has the soft-grip and
non-slip handle for reduced vibration
and greater comfort.
ITEM#:
PM0730-22
DESCRIPTION:
V28 6-1/2” CORDLESS CIRCULAR SAW

Includes: 24 T Carbide Blade, Wrench, Rip Fence, (2) Lithium-Ion Battery Packs,
One Hour Lithium-Ion Charger, and Impact Resistant Carrying Case.
CLASS # 60
V28  6-7/8” METAL CUTTING SAW
Unlike NiCad batteries, the Milwaukee® V28 Li-ion batteries maintain
their power level throughout their entire discharge cycle. The last cut or hole
drilled is as powerful as the first. This means more productivity per battery.
The 28 Volt, 3.0 Amp-Hr. battery has up to two times the run time of a
comparable 18 Volt, 2.4 Amp-Hr NiCad pack and it is lighter in weight than
18 Volt NiCad and NiMH packs. They can be recharged at any time without
creating a memory effect, regardless of the current charge level of the pack.
The V28™ Milwaukee® cordless
6-7/8” circular saw feels and cuts like
a corded saw with more power than a
24V saw, yet is lighter in weight.
The powerful 28V motor delivers
3,200 RPM for fastest cutting and the
electric brake stops blade in less than
2 seconds for fast repetitive cuts.
The upper blade guard is made of
lightweight magnesium and features a
large, impact resistant window for an
unobstructed line of sight and there is
also an LED light for better visibility.
The lightweight, all steel shoe is
heavy duty enough for any job and as
with all the V28™ cordless tools, this
saw has the soft-grip, non-slip handle
for less vibration and greater comfort.
ITEM#:
PM0740-22
DESCRIPTION:
V28 6-1/2” CORDLESS CIRCULAR SAW

Includes: 36 T Carbide Blade, Wrench, Safety Glasses, (2) Lithium-Ion Battery
Packs, One Hour Lithium-Ion Charger, and Impact Resistant Carrying Case.
CLASS # 60
V28  1” COMPACT ROTO HAMMER
Unlike NiCad batteries, the Milwaukee® V28 Li-ion batteries maintain
their power level throughout their entire discharge cycle. The last cut or hole
drilled is as powerful as the first. This means more productivity per battery.
The 28 Volt, 3.0 Amp-Hr. battery has up to two times the run time of a
comparable 18 Volt, 2.4 Amp-Hr NiCad pack and it is lighter in weight than
18 Volt NiCad and NiMH packs. They can be recharged at any time without
creating a memory effect, regardless of the current charge level of the pack.
The V28™ Milwaukee® compact
1” cordless SDS rotary hammer feels
and performs like a corded tool.
The powerful 28V motor delivers
4,700 BPM for fast drilling, and super
powerful chipping with 2.1 ft. pounds
of energy.
The compact and lightweight ‘L’
shape design weighs just 9.6 Lbs. and
measures just 11-1/8” from the grip to
the chuck which provides easy access
to tight spaces and extended comfort.
Has a heavy duty metal gear box,
block construction for precise bearing
and gear seating, and the keyless SDS
chuck for fast, tool free bit changes.
ITEM#:
PM0756-22
DESCRIPTION:
V28 1” COMPACT SDS ROTARY HAMMER

Includes: Side Handle, Depth Gauge, (2) Lithium-Ion Battery Packs, One Hour
Lithium-Ion Charger, and Impact Resistant Carrying Case.
CLASS # 60
SDS MAX ROTARY HAMMER
The Milwaukee® 1-3/4" SDS-Max combination hammer features a 14 amp,
1,300 MWO Milwaukee® motor that provides the best in class for power and
overload protection.
8.8 ft/lbs of impact energy combined with 450 RPM and 2,840 BPM, this
hammer delivers fast drilling and hard hitting performance. Features such as
an AVS anti-vibration system, mechanical clutch, and advanced electronics,
this tool provides ease of use, overall long term durability and optimal power
for the toughest concrete and demolition jobs.
•
•
•
•
•
•
•
•
Specifications:
14Amp, 1,300 MWO Motor
8.8 ft/lbs Impact Energy
450 RPM
2,840 BPM
2 Speed Impact Mode
Constant Power Technology maintains drilling speed when
tool is under load
Mechanical Clutch - protects
gears and provides added control
AVS: Anti Vibration System
ITEM#:
PM5426-21
DESCRIPTION:
1-3/4” SDS MAX COMBINATION HAMMER
CLASS # 60
DEMOLITION HAMMERS
These large electric demo hammers are used for breaking concrete and asphalt,
bushing, driving ground rods, scraping floors, digging, and tamping. These heavyduty tools have an in-line design, making them more comfortable when working on
floors. An excellent system of vibration absorption and reduction reduces operator
fatigue.
The included side handle can be attached to the rear switch handle which helps
minimize bending over. Other features include a service reminder light, soft-grip
handles, and easy access for maintenance.
SDS MAX DEMOLITION HAMMER
3/4” HEX DEMOLITION HAMMER
Specifications:
Specifications:
•
•
•
•
•
•
•
•
•
•
•
•
High Blow Energy: 19.9 ft.-lbs.
Volts: 120 AC
Amps: 14
BPM: 975 – 1,950
Chuck Type: SDS-Max
Cord Type: 10’ Fixed
Switch Type: Trigger
Electronic Feedback
Length: 27-1/2”
Weight: 24.2 lbs.
2 Auxiliary Handles
Carrying Case
ITEM#: PM5339-21
•
•
•
•
•
•
•
•
•
•
•
•
High Blow Energy: 19.9 ft.-lbs.
Volts: 120 AC
Amps: 14
BPM: 975 – 1,950
Chuck Type: 3/4” Hex
Cord Type: 10’ Fixed
Switch Type: Trigger
Electronic Feedback
Length: 27-1/2”
Weight: 24.2 lbs.
2 Auxiliary Handles
Carrying Case
ITEM#: PM5337-21
CLASS # 60
V28  1/2” IMPACT WRENCH
Unlike NiCad batteries, the Milwaukee® V28 Li-ion batteries maintain
their power level throughout their entire discharge cycle. The last cut or hole
drilled is as powerful as the first. This means more productivity per battery.
The 28 Volt, 3.0 Amp-Hr. battery has up to two times the run time of a
comparable 18 Volt, 2.4 Amp-Hr NiCad pack and it is lighter in weight than
18 Volt NiCad and NiMH packs. They can be recharged at any time without
creating a memory effect, regardless of the current charge level of the pack.
The Milwaukee ® 1/2” drive impact wrench has
the new V28™ high power motor that delivers 325
ft. lbs of torque at 0-1,450 RPM and 0-2,450 IPM.
It features a flat head detent pin and round head
pin for secure socket retention and magnesium gear
case for added durability and lighter weight.
There is a hanger bracket with a solid steel ring
and the battery pack is reversible which allows user
to change the tool balance for overhead work or to
fit into tight areas.
As with all Milwaukee ® V28™ cordless tools,
this rugged, yet lightweight impact wrench features
the soft-grip, non-slip handle which reduces fatigue
and vibration.
ITEM#:
PM0779-22
DESCRIPTION:
V28 1/2” CORDLESS IMPACT WRENCH

Includes: Hanger Bracket with Steel Ring, Round Head Detent Pin Accessory,
(2) Lithium-Ion Battery Packs, One Hour Lithium-Ion Charger, and Impact
Resistant Carrying Case.
CLASS # 60
M18 1/2” IMPACT WRENCH
The M18 Milwaukee® cordless 1/2” high torque impact wrench provides
industry leading power in a compact size. It is built with a 4-pole motor and
a powerful impact mechanism that delivers 450 ft.-lbs. of torque.
A variable speed trigger provides speed control between 0 to 1,900 RPM
and 0 to 2,200 IPM and it has a 1/2” anvil with detent pin to achieve superior
socket retention.
Specifications:
•
•
•
•
•
•
Torque: 450 ft. lbs.
Weight: 6.7 Lbs.
Size: 8-7/8”
Battery Type: M18 Li-Ion
RPM: 0-1,900
IPM: 0-2,200
Kit Includes:
• (2) 18 Volt M-18V XC Li-Ion Batteries
• 1 Hour Charger
• Carrying Case
ITEM#:
PM2662-22
DESCRIPTION:
M18 1/2” HIGH TORQUE IMPACT WRENCH
CLASS # 60
18 VOLT 1/2” DRILL
The heavy duty, 2 speed metal gear box in this Milwaukee 1/2” drill is not
only durable, but also offers speeds from 0 to 350 RPM in low and from 0 to
1,400 RPM in high as well as a high torque of 400 inch lbs.
The remarkable, new Lithium Ion battery allows the drill to maintain even
speed and power throughout the length of a charge and features a fuel gauge
that lets you easily see how much battery life is left, and a 30 minute charger
keeps you working with little to no downtime.
Specifications:
•
•
•
•
•
•
1/2” Single Sleeve Ratcheting Chuck
18 Volt Lithium Ion Battery Technology
Compact Length For Tight Areas (7-3/4”)
400 In-Lbs Torque
2 - Speed Metal Gear Box
Built In LED Light Illuminates Working Surfaces
Includes:
•
•
•
•
•
•
(2) 18 Volt Lithium Ion Batteries
(1) 30 Minute Charger
(1) Screwdriver Bit
(1) Bit Holder
(1) Belt Hook
(1) Blow Mold Carrying Case
ITEM#:
PM2601-22
DESCRIPTION:
18 VOLT CORDLESS 1/2” DRILL
CLASS # 60
ROUND HEAD FRAMING NAILER
Milwaukee’s heavy-duty, round head framing nailer with its ergonomic
magnesium housing is the lightest full round head framer in its class. Its easy
select trigger lets you move quickly from a single nail placement to contact
actuation for maximum control and application versatility.
Load 22° full round head plastic nails 2” to 3-1/2” length and diameters
.113” to .148”. The easy to read and tool free depth of drive lets you quickly
adjust the depth setting without having to reset air line pressure.
A self cleaning air filter extends life by preventing dirt and debris from
entering the tool and an adjustable air deflector with muffler directs exhaust
away from the work area and holds down the noise.
Specifications:
•
•
•
•
•
•
•
ITEM#:
PM7100-20
70-120 PSI Operating Pressure
22° Collation Angle
.16 CFM Air Consumption @ 100PSI
3/8” NPT Air Inlet
64-72 Nails Magazine capacity
Removable and Adjustable Rafter Hook
Reload Indicator
DESCRIPTION:
ROUND HEAD FRAMING NAILER
Kit Includes: Safety Glasses, 2 Oz. Oil, 4mm Hex Wrench & 5mm Hex Wrench.
CLASS # 60
NARROW CROWN STAPLER
Milwaukee’s® air powered stapler has a lightweight, Magnesium housing
for minimal fatigue and the compact size offers greater maneuverability.
Features include a self-cleaning air filter which keeps the tool free of job
site contamination, an adjustable air deflector with muffler which directs the
exhaust away from work area, and a tool-free depth of drive adjustment that
protects against overdriving nails.
The PM7155-21 has a 101 staple magazine capacity, a 1/4” air inlet and a
reload indicator which extends the motor life and prevents missing fasteners
in nailing patterns. Unit also features an oil free motor and selectable trigger
setting for easy setting of sequential or contact actuation.
The operating pressure is 70 PSI to 120 PSI max and the air consumption
is .03 ft3/cycles at 100 PSI. Takes 1/4” wide x 3/8” to 1-1/2” long, 18 gauge
narrow crown staples.
ITEM#:
PM7155-21
DESCRIPTION:
PNEUMATIC NARROW CROWN STAPLER
Kit Includes: Safety Glasses, 3mm and 5mm Hex Wrenches, Carrying Case
and 1 Box (1,000) 18 ga. Narrow Crown Staples
CLASS # 60
1/4-SHEET PALM SANDER
Milwaukee's 1/4-sheet palm sander produces a fine, swirl-free finish. The 3 amp
permanent magnet motor with 14,000 OPM produces dependable speed and power.
It is designed for comfort with a tactile rubber top and body grip surface as well
as a narrow sander body. The integrated vacuum ports fit 1-1/4” or 2-1/4” hoses for
efficient dust removal and the in-line dust port with flexible collection bag captures
the maximum amount of dust without compromising site line. Large paper clamp
tabs allow for effortless paper changes.
Specifications:
•
•
•
•
•
•
•
•
•
Amps: 3.0
Volts: 120 AC
Pad Size: 4-1/4” x 4”
No Load OPM: 14,000
Orbit Diameter: 1/16”
Cord: 12’ Fixed
Length: 5-1/2”
Tool Weight: 3.3 lbs.
Includes 3 pc. 1/4” Sheet Sandpaper, Dust
Bag & Carrying Case
ITEM#:
PM6020-21
DESCRIPTION:
1/4 – SHEET ORBITAL PALM SANDER
CLASS # 60
5” RANDOM ORBIT PALM SANDER
Milwaukee's 5" random orbital palm sander produces a fine, swirl-free finish.
The 3.0 amp permanent magnet motor produces dependable speed and power and
features electronic soft start and a variable speed dial.
This sander is designed for comfort with its tactile rubber top and body grip
surface and a narrow sander body. The integrated vacuum ports fit 1-1/4” or 2-1/4”
hoses for efficient dust removal.
Specifications:
•
•
•
•
•
•
•
•
•
•
Amps: 3.0
Volts: 120 AC
Pad Size: 5”
No Load OPM: 7,000 – 12,000
Orbit Diameter: 3/32”
Double Insulated
Cord: 12’ Fixed
Length: 5-1/2”
Tool Weight: 3.3 lbs.
Includes Dust Bag & Carrying Case
ITEM#:
PM6021-21
DESCRIPTION:
5” RANDOM ORBITAL PALM SANDER
CLASS # 60
5.5 AMP BANDFILE
The Milwaukee® 5.5 amp bandfile is the perfect tool for grinding, deburring, and
sanding metal pipe, angle iron, fiberglass, and wood. The 1/2” x 18” contact arm of
the bandfile is great for getting into awkward and tight areas.
The head of the file can be adjusted 180° and the convenient user interface has a
single on/off paddle switch and a 3 position side handle. Includes (1) 240 grit belt.
Specifications:
•
•
•
•
•
•
•
•
ITEM#:
PM6101-6
Amps: 5.5
180° Adjustable Head
Volts: 120 AC/DC
Capacity: 1/2” x 18”
No Load SFPM: 2,300
Cord: 8’ Fixed
Length: 18-1/2”
Tool Weight: 6 lbs.
DESCRIPTION:
5.5 AMP 18” BANDFILE
CLASS # 60
CORDLESS 2 SPEED GREASE GUN
The M18 cordless 2-speed grease gun delivers maximum pressure and
unmatched versatility, offering an industry leading 10,000 psi max operating
pressure and a patent pending pre-set grease counter that allows service and
maintenance professionals to dispense precise amounts of grease.
This tool’s 2-speed design offers users the ability to select between
max pressure and max flow rate. Other unique features include an on-board
LED light, a lock-on/lock-off trigger, and a plunger rod with markings to
gauge how much grease is left in the barrel.
It also features a stand up design and shoulder strap capability for user
convenience, while limiting fatigue and the 48” flexible hose offers greater
accessibility when greasing hard to reach fittings.
Specifications:
Voltage: 18V
Length: 15”
Weight: 8.5 Lbs.
PSI: 10,000
Hose Length: 48”
Flow Rate: 10 oz. per minute
Includes: (1) M18 Redlithium Compact Battery, M18/M12 Multi-Voltage Charger Battery
Charger, High Pressure Grease Coupler, Shoulder Strap, Hard Carrying Case
ITEM#:
PM2646-20
DESCRIPTION:
M18 CORDLESS 2-SPEED GREASE GUN
3.2 HP 14” CUTOFF SAW
The PM6176-20 cut-off machine has a powerful 15 amp motor designed
for maximum cutting efficiency, performance and durability allowing for
fast cutting of drywall track in bundles, angle iron, conduit, pipe, channels,
tubing, and rebar up to a 5" maximum capacity.
A quick set-up, quick release locking device holds material being cut
securely during the cutting process. Material can be angle cut up to 45
degrees. Arm locks down for easy portability when moving this tool to the
jobsite.
Specifications:
•
•
•
•
•
•
•
•
•
•
ITEM#:
PM6176-20
120V-15 Amp
2,400 Watts
3.2 HP - 3,900 RPM
45° Bevel Capacity
5” in Pipe
3-5/8” in Bar Stock
9” Max. Opening
Arbor Size: 1”
Length: 19 1/4”
Weight: 51.25 Lbs.
DESCRIPTION:
MILWAUKEE 14” CUT-OFF SAW
CLASS # 60
BREAKER HAMMER
The Bosch Brute™ breaker hammer is a ‘plug in anywhere’ demolition
hammer. An air compressor is not needed to power this monster machine as
it operates off of 115 Volt AC/DC, 15 amp outlet or a 2,500 watt generator.
Service Minder™ brush system shuts off the Brute Breaker when brush
replacement, lubrication, or preventative maintenance is needed and a grease
packed gearbox as well as the hammer mechanism eliminates the uncertainty
of job site lubrication.
Shock mounted handles absorb vibration to reduce operator fatigue and
the unit delivers a hammering output of 1,340 blows per minute. The 2-way
tool retainer accepts any standard 1-1/8” hex air tool steel with the retaining
collar or the Bosch® internal locking system.
Specifications:
•
•
•
•
•
•
•
ITEM#:
PB11304
120 Volts AC/DC
15 Amps
1,400 no load BPM
43 ft. lbs impact energy
Cord 12’
29-3/4” length
64 lbs
DESCRIPTION:
BOSCH® BREAKER HAMMER
CLASS # 60
14” GAS CUTOFF SAW
Partner® was the first on the market with hand held cutters in 1958. After
extensive usage and updates, this 14” portable cutoff saw is the one used by
emergency crews and masonry contractors all over the world. Now merged
with Husqvarna®, this is the best demolition saw on the market.
This saw features a 4.8 HP air cooled, 2 cycle 71 cc engine and it weighs
just 20 lbs. A patented air filtration system gives it 3 to 5 times the filter life
and works in combination with the carburetor to ensure power stability even
as the filter starts to fill with dust.
It has a 5” depth of cut and an easily adjustable blade guard. The sealed
starter, special cord, and reduced starter compression guarantee 50% easier
starting. It has a self lubricating clutch for long life, and you can reverse the
cutting arm so you can get closer to walls and the ground. The water kit is
standard and you can adjust the flow during operation. Made in Sweden.
•
•
•
•
•
•
•
•
•
Features:
Active air filtration system
SmartCarbTM
Easy start Dura Starter
Automatically lubricated clutch bearing
Reversible cutting arm
Wet cutting kit with easy adjust water flow
Enclosed transmission
Fuel indicator
Fuel filter with increased filtration capacity
ITEM#:
PPK700
DESCRIPTION:
HUSQVARNA® 14” GAS CUTOFF SAW
CLASS # 60
HEATED CAMOUFLAGE JACKETS
These innovative cordless heated jackets are great for outdoor use;
hiking, camping, hunting, fishing, and various other outside activities.
Perfect for ground, rocks, deadfalls and open areas.
They are multi-layered soft shell jackets that are heated with the same
M12 Red Lithium battery used to power Milwaukee M12 power tools. The
battery sits in a pocket on the back and the temperature is adjusted by an
easy touch controller on the chest of the jacket.
These jackets are wind and water resistant and have two hand pockets
and a chest pocket as well as a hood with drawstring. They provide 6 hours
of warmth on a single charge and distribute heat to 3 body zones. Includes
(1) M12 battery and (1) M12 quick charger. Hand wash recommended (with
battery removed).
Specifications:
Realtree Xtra™ Camouflage
5 Carbon Fiber Heating Elements
Special Polyester Fabric Blend
Water & Wind Resistant
Concealed Heat Controller
Durable Back Patch
USB Controller W/ Fuel Gauge Charges
Portable Electronic Devices
ITEM#:
PM2343M
PM2343L
PM2343XL
PM2343XXL
PM2343XXXL
DESCRIPTION:
M12 HEATED JACKET - CAMO - MEDIUM
M12 HEATED JACKET - CAMO - LARGE
M12 HEATED JACKET - CAMO - XLARGE
M12 HEATED JACKET - CAMO - XXLARGE
M12 HEATED JACKET - CAMO - XXXLARGE
CLASS # 60
HEATED RED JACKETS
These innovative cordless heated jackets are great for outdoor use;
jobsite, hiking, camping, hunting, fishing, and other outside activities.
Perfect for ground, rocks, deadfalls and open areas.
They are multi-layered soft shell jackets that are heated with the same
M12 Red Lithium battery used to power Milwaukee M12 power tools. The
battery sits in a pocket on the back and the temperature is adjusted by an
easy touch controller on the chest of the jacket.
These jackets are wind and water resistant and have two hand pockets
and a chest pocket as well as a hood with drawstring. They provide 6 hours
of warmth on a single charge and distribute heat to 3 body zones. Includes
(1) M12 battery and (1) M12 quick charger. Hand wash recommended (with
battery removed).
Specifications:
5 Carbon Fiber Heating Elements
Water & Wind Resistant
Concealed Heat Controller
Durable Back Patch
USB Controller W/ Fuel Gauge Charges
Portable Electronic Devices
ITEM#:
PM2341M
PM2341L
PM2341XL
PM2341XXL
PM2341XXXL
DESCRIPTION:
M12 HEATED JACKET - RED - MEDIUM
M12 HEATED JACKET - RED - LARGE
M12 HEATED JACKET - RED - XLARGE
M12 HEATED JACKET - RED - XXLARGE
M12 HEATED JACKET - RED - XXXLARGE
CLASS # 60
HEATED HI-VIS JACKETS
These innovative cordless heated jackets are great for outdoor use on the
jobsite, roadside construction, hiking, camping, hunting, fishing, and various
other outside activities.
They are multi-layered soft shell jackets that are heated with the same
M12 Red Lithium battery used to power Milwaukee M12 power tools. The
battery sits in a pocket on the back and the temperature is adjusted by an
easy touch controller on the chest of the jacket.
These jackets are wind and water resistant and have two hand pockets
and a chest pocket as well as a hood with drawstring. They provide 6 hours
of warmth on a single charge and distribute heat to 3 body zones. Includes
(1) M12 battery and (1) M12 quick charger. Hand wash recommended (with
battery removed).
Specifications:
3M Scotchlite™ Reflective Material
ANSI/ISEA 107-2010 Class III Compliant
300-Denier, 100% Polyester Outer Shell
Water & Wind Resistant
Concealed Heat Controller
Hidden Inside Pocket
ITEM#:
PM2347M
PM2347L
PM2347XL
PM2347XXL
PM2347XXXL
DESCRIPTION:
M12 HEATED JACKET -HI-VIS - MEDIUM
M12 HEATED JACKET -HI-VIS - LARGE
M12 HEATED JACKET -HI-VIS - XLARGE
M12 HEATED JACKET -HI-VIS - XXLARGE
M12 HEATED JACKET -HI-VIS - XXXLARGE
CLASS # 60
12 VOLT HEATED JACKETS
These innovative cordless heated jackets are great for outdoor use on the
jobsite, sports events, hiking, camping hunting fishing, concerts and various
other outside activities.
These soft shell jackets are heated with a 12 volt rechargeable LithiumIon battery for up to 6 hours of heated runtime on low. They have three
quick warming zones: two chest zones and one back zone and will heat up in
just minutes.
They are wind and water resistant and adjustable for maximum comfort,
fit and warmth. There are five large convenient pockets: two hand pockets,
one cell phone chest pocket, one large document pocket, and one battery
holster/controller storage pocket. Power electronic devices with the USB
battery backup power access on the battery.
ITEM#:
PBHJM
PBHJL
PBHJXL
PBHJXXL
PBHJXXXL
DESCRIPTION:
BOSCH HEATED JACKET - MEDIUM
BOSCH HEATED JACKET - LARGE
BOSCH HEATED JACKET - X-LARGE
BOSCH HEATED JACKET - XX-LARGE
BOSCH HEATED JACKET - XXX-LARGE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement