6h-ElectricMotors

6h-ElectricMotors
HUB CITY - ELECTRIC MOTORS
ELECTRIC MOTORS
Electric Motors
Introduction............................................................................ H-2
Three Phase TEFC General Purpose Motors................ H-3
Single Phase TEFC General Purpose Motors............... H-4
Totally Enclosed Brakemotors.......................................... H-4
Washdown Duty Motors.................................................... H-5 & H-7
Inverter Duty Motors........................................................... H-6
Permanent Magnet DC Motors........................................ H-7
Motor Dimensions Table................................................... H-8
H
CALL: (605) 225-0360 • FAX: (605) 225-0567
H-1
HUB CITY - ELECTRIC MOTORS
ELECTRIC Motors
Performance matched to Hub City gear drives.
®
Basic Specifications
• Power Ratings from 1/4 to 50 hp
• 1.15 Service Factor
• Operating Speed 1750 rpm
• Single Phase or Three Phase Design
Standard Features
•M
otors Produced by Regal Beloit for
High Efficiency, Reliability and Durability
• UL Recognized and CSA Certified
•B
all Bearings for Endurance and
Strength
• T otally Enclosed General Purpose Motors
Feature Steel Frames
•B
rake Motors Feature Stearns Brakes,
Bolt-On Removable Bases
•W
ashdown Motors Feature USDA
Approved White Epoxy Paint, 303
Stainless Steel Shafts, Internal
Corrosion Resistant Coatings and
Class F Insulation System
• Inverter Duty Motors Feature Encoder
and Brake Provisions,
Class F Insulation System, and Three
Year Warranty
•D
C Motors Feature Oversized Brushes
for Long Life, Class F Insulation System,
and Two Year Warranty.
Optional Features
•A
djustable Speed Motor Controls
Available
• Modified Standard and Custom Designs
•C
leanLine™ Washdown and BISSC®
Configurations
•U
nique or Harsh Environment
Adaptations
•M
otor/Gear Drive Package Incentives
Available, Consult Factory
Don’t see the motor you need?
Contact Hub City.
Many more stock motors available.
H-2
CALL: (605) 225-0360 • FAX: (605) 225-0567
HUB CITY - ELECTRIC MOTORS
Three Phase TEFC General Purpose
Features:
n
n
n
n
all bearings, mechanically
B
locked on shaft end
1.15 Service factor
Rolled steel 56-145T frame
motors
UL Recognized and
CSA Certified
Three Phase
TEFC 1750 RPM C-Face Motors
Nom.
HP
Volts
FrameCat. No.Eff.
1/4
1/3
1/2
3/4
1
1-1/2
2
3
5
7-1/2
n
n
n
n
all bearings, mechanically
B
locked on shaft end
1.15 Service factor
Rolled steel 56-145T frame
motors
UL Recognized and
CSA Certified
Footnote
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
56C
56C
56C
56C
56C
G547
G502
G507
G522
G527
66.0
68.0
68.0
75.5
77.0
1.2-1.3/.65
1.5-1.6/0.8
2.1-2.2/1.1
2.7-2.8/1.4
3.5-3.6/1.8
14
15
17
21
27
7.88
8.13
8.63
9.13
10.26
20, 24
20, 24
20, 24
20, 24
20
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
56C
56C
182TC
184TC
213TC
G541
G544
C223
C224
C225
80.0
82.5
82.5
86.5
87.5
4.8-4.8/2.4
6.0-5.8/2.9
8.0/4.0
13.0/6.5
22.0-19.4/9.7
29
39
76
92
103
10.26
11.75
13.07
14.07
16.09
20
20
F, 24
F, 20, 24
F, 20, 24
10
15
20
25
30
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
215TC
254TC
256TC
284TC
286TC
C226
C227
(1) U724
(1) U725
(1) U726
88.5
88.5
91.0
92.4
92.4
27.6-25.0/12.5
41.0-38.6/19.3
51.0/25.5
68.0-63.0/31.5
81.0-74.0/37.0
135
179
225
425
455
17.59
19.24
20.99
21.68
23.18
F, 20, 24
AL, F, 24
AL, F, 20, 24
F, 20, 24
F, 20, 24
40
50
203/460
203/460
324TC
326TC
(1) U727
(1) U728
92.4
92.4
100/50.0
122/61.0
543
600
23.97
25.47
F, 20, 24
F, 20, 24
Notes: (1) FRAME IS C FACE WITH RIGID BASE
Features:
F.L.
Weight “LQ”
AMPSLBSDim.
575 Volt Three Phase
TEFC 1750 RPM C-Face Motors
Nom.
HP
Volts
FrameCat. No.Eff.
1/3
1/2
3/4
1
1-1/2
2
3
5
7-1/2
10
575
575
575
575
56C
56C
56C
56C
575
575
575
575
575
575
56C
145TC
182TC
184TC
213TC
215TC
(1)
(1)
(1)
(1)
G503
G508
G523
G528
68.0
68.0
75.5
77.0
0.64
0.90
1.10
1.45
15
18
20
26
8.13
8.63
9.13
10.26
(1) G548
(1) G549
(2) C383
(2) C387
(2) C391
(2) C394
80.0
82.5
87.5
88.5
89.5
89.5
1.90
2.25
3.40
5.20
8.00
10.40
28
41
77
87
122
135
10.26
11.57
13.07
14.03
16.35
17.85
Footnote
24
24
24
F,
F,
F,
F,
24
24
24
24
Notes:(1) C FACE - FOOTLESS (2) C FACE WITH REMOVABLE BASE
Footnotes:
AL
F
F.L.
Weight “LQ”
AMPSLBSDim.
20
Aluminum Frame Construction
Class F Insulation
24
Rated 60/50 hertz, 190/380 or 380 volt at next
lower horsepower
Motor will not accept brake kit
H
Application Guidelines
Guidelines for Application General Purpose,
Three Phase Motors on Variable Frequency Drives
Meets NEMA MG-1-1998 Part 30 and Part 31 Section 4.4.2
10:1
VariableMaximum Inverter to motor
Torquecable length @ 3KHz carrier
EnclosureEfficiency Frame
2:1 C.T.
230 V
460 V
575 V
Totally Enclosed
Don’t see the motor you need?
Contact Hub City.
Many more stock motors available.
Standard
56-326X
600 ft
125 ft
40 ft
• Contact Marathon Electric for guidelines in applying explosion proof motors on inverters.
• Carrier frequency is measured phase-to-phase, not phase-to-bus. Higher carrier frequencies require
shorter cable Contact HUB CITY for details.
Specifications are subject to change without notice.
CALL: (605) 225-0360 • FAX: (605) 225-0567
H-3
HUB CITY - ELECTRIC MOTORS
Single Phase TEFC General Purpose & Totally Enclosed Brakemotors
Single Phase
TEFC 1750 RPM
C-Face Motors
Features:
n
n
n
n
n
Ball bearings, mechanically locked on shaft end
Heavy gauge steel frame
Capacitor start design for high starting torque
1.15 Service factor
UL Recognized and CSA Certified
Weight
HP
Volts
FrameCat. No.
F.L. AMPSLBS.
“LQ” Dim. Footnotes
1/4
1/3
1/2
3/4
1
1-1/2
115/208-230
115/208-230
115/208-230
115/208-230
115/208-230
115/208-230
56C
56C
56C
56C
56C
56C
G511
G513
G515
G517
G519
G531
4.2/2.1-2.1
6.0/3.0-3.0
8.0/4.0-4.0
11.0/5.4-5.5
13.4/6.8-6.7
15.2/8.2-7.6
Footnotes:
N
1
2
17
24
Totally Enclosed, Non-Ventilated
Capacitor Start/Capacitor Run design for
reduced amperage
Single Phase
TEFC 1750
RPM C-Face
Brakemotors
16
18
23
30
31
40
7.88N,2,17,24
8.38
2, 24
9.13
2, 24
10.26
2
10.76
2
11.76
1
Capacitor Start Induction Run design
1.0 Service Factor
Motor will NOT accept a Brake Kit
Features:
n
n
n
n
n
F ail-safe, spring set Stearns brake for
holding or stopping
Brake has manual wear adjustment up to
10lb.-ft. for longer pad life
Manual release lever on rear of brake
housing
Brake leads are terminated at the brake
Vertical or horizontal mounting
n
n
n
n
n
n
Brake coil voltage matches motor voltages
Bolt-on, easily removable rigid base
Ball bearings, mechanically locked on shaft
end
1.15 Service factor
Nameplated 60/50 hertz at next lowest
horsepower
UL Recognized and CSA Certified
Brake
Weight
HP
Volts FrameCat. No.Rating F.L. AMPSLBS. “LQ” Dim. Footnotes
1/3
1/2
3/4
1
1-1/2
115/208-230
115/208-230
115/208-230
115/208-230
115/208-230
56C
56C
56C
56C
56C
D400
D401
D402
D403
D404
3
3
6
6
10
6.6/3.1-3.3
8.8/4.2-4.4
11.0/5.4-5.5
13.4/6.8-6.7
15.2/8.2-7.6
33
35
38
40
53
14.14
14.14
14.64
15.14
16.14
2
2
2
2
1
Footnotes:
1
2
Capacitor Start/Capacitor Run design for reduced amperage
Capacitor Start Induction Run design
Three Phase
TEFC 1750 RPM
C-Face
Brakemotors
Features:
n
n
n
n
n
n
In addition to the Single Phase Features above:
Brake leads routed through motor conduit box (TENV only)
Suitable for vertical mounting, 10 lb.-ft. and smaller
CR200 Corona resistant magnet wire (motor can be operated
10:1 variable torque and 2:1 constant torque)
1.15 Service factor, 1.0 Service factor where footnoted
Bolt-on, easily removable rigid base
Brake
Weight
HP
Volts FrameCat. No.Rating F.L. AMPSLBS. “LQ” Dim.
1/3
1/2
3/4
1
1-1/2
2
H-4
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
56C
56C
56C
56C
56C
145TC
D450
D452
D454
D456
D457
C403
3
3
6
6
10
10
1.8-1.6/0.8
2.3-2.4/1.2
2.9-3.0/1.5
3.5-3.6/1.8
4.8-4.8/2.4
6.0-5.8/2.9
31
32
33
35
41
48
13.67
14.17
14.17
15.17
15.20
16.65
Don’t see the motor you need?
Contact Hub City.
Many more stock motors available.
CALL: (605) 225-0360 • FAX: (605) 225-0567
HUB CITY - ELECTRIC MOTORS
Washdown Duty
Single Phase
Totally
Enclosed
1750 RPM
C-Face
Washdown
Duty Motors
Features:
n
n
n
n
n
n
n
n
n
n
n
Double sealed ball bearings
303 Stainless steel shaft with spring loaded contact seals in each
endshield Electronic encapsulated starting switch is impervious to
moisture Cast conduit box with threaded openings, stainless steel cover
Internal corrosion resistant coatings on frame, base, endshields,
rotor and stator
USDA-approved, white epoxy paint
Plugged drain holes in each endshield for all angle mounting
Capacitor start design for high starting torque
Class F insulation 1.15 Service factor
Capacity start/induction run design
Weight
HP
Volts
FrameCat. No. F.L. AMPSLBS.
1/3
1/2
3/4
1
1-1/2
115/208-230
115/208-230
115/208-230
115/208-230
115/208-230
56CN531
56CN523
56CN525
56CN527
56CN529
6.4/3.2-3.2
8.8/4.4-4.4
10.8/5.4-5.4
12.8/6.4-6.4
19.0/9.5-9.5
“LQ” Dim.
27
29
31
37
43
8.63
9.13
9.63
10.13
11.63
Features:
Three Phase
Totally
Enclosed
1750 RPM
C-Face
Washdown
Duty Motors
n
n
n
n
n
n
n
n
n
n
n
n
Variable torque (6-60Hz) 1.0 Service Factor on VFD
See Inverter Duty column for constant torque capability
Double sealed ball bearings
303 Stainless steel shaft with spring loaded contact seals in each
endshield Cast conduit box with threaded openings, stainless steel cover
Internal corrosion resistant coatings on frame, base, endshields,
rotor and stator
USDA-approved, white epoxy paint
Plugged drain holes in each endshield for all angle mounting
Stainless steel fan guard
MAX GUARD® Class F insulation system
1.15 Service factor
Rigid mounting base
Suitable for use on VFD, see Inverter Duty column below.
InverterNom.
Weight
HP
Volts
FrameCat. No.DutyEff.
F.L. AMPSLBS.
1/4
1/3
1/2
3/4
1
1-1/2
2
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
208-230/460
56CN564
56CN565
56CN567
56CN599
56CN602
56CN606
56CN611
6:1
6:1
6:1
6:1
6:1
6:1
3:1
CT
CT
CT
CT
CT
CT
CT
67.0
68.0
78.5
80.0
80.0
80.0
81.5
1.1-1.1/.6
1.7-1.7/.9
1.8-1.8/.9
2.5-2.5/1.3
3.6-3.6/1.8
5.0-5.0/2.5
6.2-6.2/3.1
21
23
27
30
31
36
38
“LQ” Dim.Footnotes
8.63N
8.63N
8.00N
8.50N
9.50N
11.00N
10.63
H
Footnotes:
N Totally Enclosed, Non-Ventilated Don’t see the motor you need?
Contact Hub City.
Many more stock motors available.
CALL: (605) 225-0360 • FAX: (605) 225-0567
H-5
HUB CITY - ELECTRIC MOTORS
Three Phase Inverter Duty
Three Phase
Totally
Enclosed
Non-Ventilated
1750 RPM
C-Face Inverter
Duty Motors
Features:
n
n
n
n
n
n
n
n
n
n
n
n
n
MAX GUARD® Class F insulation system
Constant torque operation from 0 to base speed on
Vector Drive
Constant horsepower to twice base RPM
Continuous duty at 40º C ambient
Optimized for operation with IGBT inverter (NEMA Design A)
Normally closed thermostats (one per phase)
Removable Base on some models, as noted
Ball bearing
Field reversible to F2 (except where noted) Encoder and brake provisions included on opposite drive end
(maximum 10 lb-ft brake
UL Recognized and CSA Certified (contact factory for CE
marking)
Three year warranty
Rigid mounting base
Weight
HP
VoltsRange
FrameCat. No. F.L. AMPSLBS.
1/4
1/2
1
2
3
5
7-1/2
10
230/460
230/460
230/460
230/460
230/460
230/460
230/460
230/460
1000:1
1000:1
1000:1
1000:1
1000:1
1000:1
1000:1
1000:1
56CY592
56CY534
143TCY536
145TCY551
182TCY541
184TCY543
213TCY545
215TCY547
Footnotes:
AL Aluminum Frame Construction
S Steel Frame Construction
Three Phase
575 Volt
Totally
Enclosed
Non-Ventilated
1750 RPM
C-Face Inverter
Duty Motors
1.2
1.6/0.8
3.0/1.5
6.0/3.0
8.4/4.2
13.0/6.5
21.4/10.7
27.0/13.5
6
13
17
28
43
70
96
98
146
159
n
n
n
n
n
n
n
n
n
n
n
n
575
575
575
575
575
575
575
AL
AL
AL
AL
MAX GUARD® Class F insulation system
Constant torque operation from 0 to base speed on
Vector Drive
Constant horsepower to twice base RPM
Continuous duty at 40º C ambient
Optimized for operation with IGBT inverter (NEMA Design A)
Normally closed thermostats (one per phase)
Removable base on some models, as noted
Ball bearing
Field reversible to F2 (except where noted) Encoder and brake provisions included on opposite drive end
(maximum 10 lb-ft brake
UL Recognized and CSA Certified (contact factory for CE
marking)
Three year warranty
Rigid mounting base
1000:1
1000:1
1000:1
1000:1
1000:1
1000:1
1000:1
Footnotes:
AL Aluminum Frame Construction
S Steel Frame Construction
H-6
S, 13
S, 6, 13
S, 6, 13
Bolt-on, removable base for footless mounting option
F1 Mounting Only, Cannot reassemble to F2
Weight
HP
VoltsRange
FrameCat. No. F.L. AMPSLBS.
1/2
1
2
3
5
7-1/2
10
9.70
11.42
12.92
12.56
15.32
16.32
17.12
19.62
Features:
n
“LQ” Dim. Footnotes
56CY555
56CY556
145TCY557
182TCY558
184TCY559
213TCY560
215TCY561
0.6
1.2
2.4
3.4
5.4
7.0
10.8
6
13
CALL: (605) 225-0360 • FAX: (605) 225-0567
28
41
70
96
98
146
159
Don’t see the motor you need?
Contact Hub City.
Many more stock motors available.
“LQ” Dim. Footnotes
11.42
12.92
12.56
15.32
16.32
17.12
19.62
S, 6, 13
S, 6, 13
AL
AL
AL
AL
Bolt-on, removable base for footless mounting option
F1 Mounting Only, Cannot reassemble to F2
HUB CITY - ELECTRIC MOTORS
Permanent Magnet DC Motors
SCR Rated,
Totally Enclosed,
1750 RPM
C-Face with
Removable Base
HP
1/4
1/4
1/3
1/3
1/2
1/2
3/4
3/4
1
1
1-1/2
2
Features:
Class F insulation
NEMA C-Face with removable rigid base
n Oversized brushes for extra long life
n Permanently lubricated sealed ball bearings
n Linear speed/torque characteristics over entire speed range
n High starting torque, high peak current capability
n Usable on PWM type DC adjustable speed drives at higher
HP rating
n Easy brush access with unique brush holder design
n UL Recognized and CSA Certified
n 2 year warranty n
n
DCC.T. Speed.
*PWM HP Weight
Volts FrameEncl.Cat. No.Range
F.L. AMPSRatingLBS. “LQ” Dim.Footnotes
90
180
90
180
90
180
90
180
90
180
180
180
Footnotes: 84
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
56C
145TC
TEFCZ602
TEFCZ603
TEFCZ604
TEFCZ605
TEFCZ606
TEFCZ607
TEFCZ610
TEFCZ611
TEFCZ612
TEFCZ613
TEFCZ614
TEFCZ616
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
2.5
1.4
3.5
1.7
5.0
2.5
7.6
3.8
10.0
5.0
7.6
9.5
NEMA 145TC face mounting with removable 182T rigid base
0.40
0.50
0.50
0.50
0.70
0.56
1.00
1.00
1.25
1.25
1.75
2.00
19
22
23
22
24
25
27
27
40
40
51
78
8.75
9.25
9.25
9.25
9.75
9.75
11.75
11.75
13.75
12.75
14.75
18.03
84
85Not tach adaptable
Features:
Washdown,
SCR Rated,
Totally Enclosed,
1750 RPM
C-Face with
Removable Base
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
HP
1/4
1/3
1/2
1/2
3/4
3/4
1
1
1-1/2
Class F insulation
NEMA C-Face with removable rigid base
Oversized brushes for extra long life
Doubled sealed, oversized ball bearings
Corrosion resistant 303 stainless steel shaft
High temperature, moisture resistant lubricant
Exterior and interior components protected with enamel &
polyester compounds
Aluminum conduit box, threaded and gasketed
“V” ring Forsheda seals
Drains at 3:00, 6:00, 9:00 and 12:00 locations
Sealed machine fits
Stainless steel nameplate
USDA approved white epoxy paint
UL Recognized and CSA Certified
2 year warranty
DCC.T. Speed.
*PWM HP Weight
Volts FrameEncl.Cat. No.Range
F.L. AMPSRatingLBS.
90
90
90
180
90
180
90
180
180
56C
56C
56C
56C
56C
56C
56C
56C
56C
TENVZ630
TENVZ631
TENVZ634
TENVZ635
TENVZ636
TENVZ637
TEFCZ638
TEFCZ639
TEFCZ641
20:1
20:1
20:1
20:1
20:1
20:1
2:1
2:1
2:1
2.7
3.5
4.9
2.4
7.0
3.5
10.0
5.0
7.6
0.30
0.56
0.75
0.70
1.25
1.25
1.25
1.25
1.75
23
26
38
39
50
50
42
42
50
“LQ” Dim.
H
8.63
9.63
11.63
11.63
13.63
13.63
13.75
12.75
14.75
*SCR PMDC motors on PWM power supplies
Pulse width modulated DC controls have a voltage output similar to pure direct current which has a form factor of 1.05. SCR thyristor
drives have a form factor of 1.40. Marathon Electric’s non-Explosion Proof PMDC, SCR-rated motors can also be used with PWM
controls, and due to the lower form factor and the resultant lower heating in the motor, their rating can be increased as indicated above.
Operation on PWM controls will also result in quieter operation and longer brush life.
CALL: (605) 225-0360 • FAX: (605) 225-0567
H-7
HUB CITY - ELECTRIC MOTORS
Electric Motors
Typical Rigid Base Motor
Typical C-Face Motor
C*
(48-184)
(182T-449)
BB
C*
P
AH
AH
45°
45°
AK BD
O
O
U
BS
2F
B
P
U
+.00
D -.06
AA
LEAD HOLE
BA
AB
N-W
AB
'H' DIA
4 HOLES
FrameDE
2FH
BS
AJ
E
BA
+.00
D -.06
AA
LEAD HOLE
'H' DIA.
4 HOLES
2F
(B)
E
A
BF
4 HOLES
O
P
(MAX) (MAX)UN-W AA
E
E
A
AB
BB
BD
(MAX) AH
AJ
AK
BA (MIN) (MAX)
BF
48
56
56H
143T
145T
3.00
3.50
3.50
3.50
3.50
2.12
2.44
2.44
2.75
2.75
2.75
3.00
5.00
4.00
5.00
.34 SLOT
.34 SLOT
.34 SLOT
.34
.34
5.83
6.32
6.74
7.45
7.45
5.66
5.66
6.48
7.75
7.75
.5000
.6250
.6250
.8750
.8750
1.50
1.88
1.88
2.25
2.25
1/2
1/2
1/2
3/4
3/4
–
–
–
7.04
7.04
1.69
2.06
2.06
2.12
2.12
3.750
5.875
5.875
5.875
5.875
3.000
4.500
4.500
4.500
4.500
2.50
2.75
2.75
2.25
2.25
.16
.16
.16
.16
.16
5.62
6.50
6.50
6.50
6.50
1/4-20
3/8-16
3/8-16
3/8-16
3/8-16
182
184
182T
184T
213
4.50
4.50
4.50
4.50
5.25
3.75
3.75
3.75
3.75
4.25
4.50
5.50
4.50
5.50
5.50
.41
.41
.41
.41
.41
9.38
9.38
9.38
9.38
11.00
9.76 .8750
9.76 .8750
9.76 1.1250
9.76 1.1250
11.50 1.1250
2.25
2.25
2.75
2.75
3.00
3/4
3/4
3/4
3/4
1
8.08
8.08
8.08
8.08
9.31
2.12
2.12
2.62
2.62
2.75
5.875
5.875
7.250
7.250
7.250
4.500
4.500
8.500
8.500
8.500
2.75
2.75
2.75
2.75
3.50
.16
.16
.25
.25
.25
6.50
6.50
9.00
9.00
9.00
3/8-16
3/8-16
1/2-13
1/2-13
1/2-13
215
213T
215T
254U
256U
5.25
5.25
5.25
6.25
6.25
4.25
4.25
4.25
5.00
5.00
7.00
5.50
7.00
8.25
10.00
.41
.41
.41
.53
.53
11.00
11.00
11.00
14.09
14.09
11.50
11.50
11.50
14.27
14.27
1.1250
1.3750
1.3750
1.3750
1.3750
3.00
3.38
3.38
3.75
3.75
1
1
1
1-1/4
1-1/4
9.31
9.31
9.31
10.96
10.96
2.75
3.12
3.12
3.50
3.50
7.250
7.250
7.250
7.250
7.250
8.500
8.500
8.500
8.500
8.500
3.50
3.50
3.50
4.25
4.25
.25
.25
.25
.25
.25
9.00
9.00
9.00
10.00
10.00
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
254T
256T
284U
286U
284T
6.25
6.25
7.00
7.00
7.00
5.00
5.00
5.50
5.50
5.50
8.25
10.00
9.50
11.00
9.50
.53
.53
.53
.53
.53
14.09
14.09
14.94
14.94
14.94
14.27 1.625
14.27 1.625
15.88 1.625
15.88 1.625
15.88 1.875
4.00
4.00
4.88
4.88
4.62
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
10.96
10.96
13.19
13.19
13.19
3.75
3.75
4.62
4.62
4.38
7.250
7.250
9.000
9.000
9.000
8.500
8.500
10.500
10.500
10.500
4.25
4.25
4.75
4.75
4.75
.25
.25
.25
.25
.25
10.00
10.00
11.25
11.25
11.25
1/2-13
1/2-13
1/2-13
1/2-13
1/2-13
286T
284TS
286TS
324U
326U
7.00
7.00
7.00
8.00
8.00
5.50
5.50
5.50
6.25
6.25
11.00
9.50
11.00
10.50
12.00
.53
.53
.53
.66
.66
14.94
14.94
14.94
15.93
15.93
15.88 1.875
15.88 1.625
15.88 1.625
15.88 1.875
15.88 1.875
4.62
3.25
3.25
5.62
5.62
1-1/2
1-1/2
1-1/2
2
2
13.19
13.19
13.19
13.69
13.69
4.38
3.00
3.00
5.38
5.38
9.000
9.000
9.000
11.000
11.000
10.500
10.500
10.500
12.500
12.500
4.75
4.75
4.75
5.25
5.25
.25
.25
.25
.25
.25
11.25
11.25
11.25
14.00
14.00
1/2-13
1/2-13
1/2-13
5/8-11
5/8-11
324T
326T
324TS
326TS
364U
8.00
8.00
8.00
8.00
9.00
6.25
6.25
6.25
6.25
7.00
10.50
12.00
10.50
12.00
11.25
.66
.66
.66
.66
.66
15.93
15.93
15.93
15.93
19.00
15.88 2.125
15.88 2.125
15.88 1.875
15.88 1.875
20.00 2.125
5.25
5.25
3.75
3.75
6.38
2
2
2
2
2-1/2
13.69
13.69
13.69
13.69
17.88
5.00
5.00
3.50
3.50
6.12
11.000
11.000
11.000
11.000
11.000
12.500
12.500
12.500
12.500
12.500
5.25
5.25
5.25
5.25
5.88
.25
.25
.25
.25
.25
14.00
14.00
14.00
14.00
14.00
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
365U
364T
365T
364TS
365TS
9.00
9.00
9.00
9.00
9.00
7.00
7.00
7.00
7.00
7.00
12.25
11.25
12.25
11.25
12.25
.66
.66
.66
.66
.66
19.00
19.00
19.00
19.00
19.00
20.00 2.125
20.00 2.375
20.00 2.375
20.00 1.875
20.00 1.875
6.38
5.88
5.88
3.75
3.75
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
17.88
17.88
17.88
17.88
17.88
6.12
5.62
5.62
3.50
3.50
11.000
11.000
11.000
11.000
11.000
12.500
12.500
12.500
12.500
12.500
5.88
5.88
5.88
5.88
5.88
.25
.25
.25
.25
.25
14.00
14.00
14.00
14.00
14.00
5/8-11
5/8-11
5/8-11
5/8-11
5/8-11
*C dimensions can be calculated by adding the LQ dimensions on motor pages H-3 to H-7 to the AH dimension. (C = LQ + AH)
WARNING
H-8
For safety and to comply with local and national safety codes, the purchaser or user must provide protective guards over
all shaft extensions and devices mounted thereon.
Don’t see the motor you need?
Contact Hub City.
Many more stock motors available.
CALL: (605) 225-0360 • FAX: (605) 225-0567
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement