AVS.4.13.14020/CC-15 Issuing Center: ANTWERP Page 1/2 VERITAS CERTIFICATE OF CONFORMITY To ICAO Annex 14 - Fifth Edition - July 2009 (Standards and recommended practices) To FAA Advisory Circular 150/5345-28 AENA specification DIN/DSEYN/PPT/020 Product: SPL-1-300 Clear/ Red Manufactured by ADB in Belgium Application: Precision Approach Path Indicator - was found in conformity with: • the cata logue sheet A.02.515 • the ICAO - Annex 14 - Volume I - § 18.104.22.168 till 22.214.171.124 for light & co lor output • the FAA AC 150/5345-28 requirements for L-880 & L-881 PAP ls • . AENA specification DIN/DSEYN/PPT/020 - Date of inspection: May 29th, 2013. - and has been, upon request of: ADB Leuvensesteenweg, 585 B -1930 ZAVENTEM - BELGIUM - inspected in conformity with the applicable requirements of • the catalogue sheets A. 02.515 • the ICAO - Annex 14 - Volume I - § 126.96.36.199 ti ll 188.8.131.52 for light & colo r output • the FAA AC 150/5345-28 requirements for L-880 & L-88 1 PAP ls • AENA specification DIN/DSEYN/PPT/020 Issued at Antwerp, May 29th, 2013 Mr Rudi Vandenbempt Inspector Industry BUREAU VERITAS ..~. - RP / i:> INSPECTORS "S'(p AT~NTVIt:RP Particulars of inspection: detailed hereafter This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicable requirements occur during thi s period of validity. AVS.4.13.14020/CC-1S Issuing Center: ANTWERP Page 2 / 2 VERITAS The following survey operations have been carried out without noticeable remarks: • Attendance to tests at the laboratory premises of the manufacturer: o Examination of test equipment o Checking of installation of units before testing o Attendance to photometric tests per applicable procedu res and meth od o Attendance to the Colorimetric tests per applicable procedure & method • Review of test results are detailed in the attached test records. Review of Intertek ETl Certificate of Conformance dated Aug 9, 2007 reviewed Feb 11, 2013 Intertek Test Report No: 103A0481; 3103794CRT-001; 3163672CRT-00 1; 3119070CRT-001; 10071 0759CRT-001 CONCLUSION Taking into account the satisfactory resu lts of actual tests and examinations we confirm that the manufacturing and the test results for the above specified units are in conformity with applicable standards, specifications and data sheets. (Details of standards and specifications are indicated on page 1 of this certificate and data sheet as per catalogue). ENCLOSURE Test records of testings which have been attended , du ly stamped for identification by BUREAU VERITAS: Photometric test reports: • Results of intensity values inside the beam • Isocandela curves • Colorimetry Issued at Antwerp, May 29th, 2013 This certificate is only valid for a period of 5 years from t he issua nce date, as f ar as no changes of production process, equipment characteristics nor of app licab le req uirements occur during this period of validity.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project