AOZ8831-03 Ultra Low Capacitance One-line Bi-directional TVS Diode

AOZ8831-03 Ultra Low Capacitance One-line Bi-directional TVS Diode
AOZ8831-03
Ultra Low Capacitance One-line
Bi-directional TVS Diode
General Description
Features
The AOZ8831-03 is an ultra low capacitance one-line
bi-directional transient voltage suppressor diode
designed to protect high speed data lines and voltage
sensitive electronics from high transient conditions and
ESD.

ESD protection for high-speed data lines:
– Exceeds: IEC 61000-4-2 (ESD) ±20kV (air),
±20kV (contact)
– Human Body Model (HBM) ±15kV

Small package saves board space
This device incorporates one TVS diode in an ultra-small
DFN 1.0 x 0.6 package. It may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4.

Ultra low capacitance: 0.22pF

Low clamping voltage

Operating voltage: 3.6V
The AOZ8831-03 comes in an RoHS compliant DFN
package and is rated over a -40°C to +85°C ambient
temperature range.

Pb-free device
The ultra-small 1.0 x 0.6 x 0.4mm DFN package makes it
ideal for applications where PCB space is a premium.
The small size and high ESD protection makes it ideal for
protecting voltage sensitive electronics from high transient conditions and ESD.

Portable handheld devices

Notebook computers

Digital Cameras

Portable GPS
Typical Application
Pin Configuration
Applications
Top View
Bidirection Protection of Single Line
Rev. 3.0 January 2016
www.aosmd.com
Pin 2
2
Pin 1
Pin 2
1
Pin 1
Signal Line
Bottom View
Page 1 of 7
AOZ8831-03
Ordering Information
Part Number
Ambient Temperature Range
Package
Environmental
AOZ8831DT-03
-40°C to +85°C
DFN 1.0 x 0.6
Green Product
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information.
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Parameter
Rating
VP – VN
3.6V
Peak Pulse Current (IPP), tP = 8/20µs
6A
Peak Pulse Power (IEC61000-4-5 8/20µs current pulse)
90W
Storage Temperature (TS)
-65°C to +150°C
ESD Rating per IEC61000-4-2,
Contact(1)
±20kV
ESD Rating per IEC61000-4-2,
Air(1)
±20kV
Model(2)
±15kV
ESD Rating per Human Body
Notes:
1. IEC 61000-4-2 discharge with CDischarge = 150pF, RDischarge = 330Ω.
2. Human Body Discharge per MIL-STD-883, Method 3015 CDischarge = 100pF, RDischarge = 1.5kΩ.
Maximum Operating Ratings
Parameter
Rating
Junction Temperature (TJ)
Rev. 3.0 January 2016
-40°C to +125°C
www.aosmd.com
Page 2 of 7
AOZ8831-03
Electrical Characteristics
TA = 25°C unless otherwise specified.
Symbol
Parameter
Diagram
IPP
Maximum Reverse Peak Pulse Current(3)
(IEC61000-4-5 8/20µs pulse)
VCL
Clamping Voltage @ IPP(3)
VRWM
IR
VBR
CJ
I
IPP
Working Peak Reverse Voltage
Maximum Reverse Leakage Current
VCL VBR VRWM
IR
IT
Breakdown Voltage
VRWM VBR VCL
V
Capacitance @ VR = 0 and f = 1MHz
IPP
Device
Device VRWM (V)
Marking
Max.
AOZ8831DT-03
4
3.6
VBR (V)
Min.
Max.
IR (µA)
Max.
4.5
10
0.1
VCL Max.
IPP = 1 A IPP = 4 A
4
9.5
CJ (pF)
IPP = 6 A
Typ.
Max.
15
0.22
0.35
Notes:
3. These specifications are guaranteed by design and characterization.
Rev. 3.0 January 2016
www.aosmd.com
Page 3 of 7
AOZ8831-03
Performance Characteristics
Clamping Voltage vs. Peak Pulse Current
Typical Variations of CIN vs. VR
(IEC 61000-4-5 8/20µs current pulse)
16
(f = 1MHz, T = 25ºC)
1.0
0.9
0.8
Normalized Capacitance
Clamping Voltage, VCL (V)
14
12
10
8
6
0.7
0.6
0.5
0.4
0.3
0.2
4
0.1
0
2
0
1
Rev. 3.0 January 2016
2
3
4
Peak Pulse Current, IPP (A)
5
6
www.aosmd.com
0
0.5
1.0
1.5
2.0
Input Voltage (V)
2.5
3.0
3.5
Page 4 of 7
AOZ8831-03
Package Dimensions, DFN 1.0 x 0.6
A
D
Pin #1 ID
0.125x45°
E
e
2xL
O ddd M C A B
A1
Seating Plane
2xb
O ddd M C A B
C
SIDE VIEW
BOTTOM VIEW
RECOMMENDED LAND PATTERN
1.00
0.70
0.40
0.30
0.55
0.30
0.125x45°
Dimensions in millimeters
Symbols
A
A1
b
D
E
e
L
ccc
ddd
Min.
0.31
0.00
0.45
0.55
0.95
Nom.
0.38
0.02
0.50
0.60
1.00
0.65 BSC
0.20
0.25
0.03
0.10
Max.
0.40
0.05
0.55
0.65
1.05
0.30
Dimensions in inches
Symbols
A
A1
b
D
E
e
L
ccc
ddd
Min.
0.012
0.000
0.018
0.022
0.037
Nom. Max.
0.015 0.016
0.001 0.002
0.020 0.022
0.024 0.026
0.039 0.041
0.026 BSC
0.008 0.010 0.012
0.001
0.004
UNIT: mm
Notes:
1. All dimensions are in millimeters, angles are in degrees.
2. Coplanarity applies to the exposed heat sink slug as well as the terminals.
Rev. 3.0 January 2016
www.aosmd.com
Page 5 of 7
AOZ8831-03
Tape and Reel Dimensions, DFN 1.0 x 0.6
Carrier Tape
P1
P2
T
D1
E1
E2
E
B0
K0
P0
D0
A0
UNIT: mm
Option
A
Package
B0
A0
K0
DFN 1.0x0.6/ 0.69 1.19
0.66
DFN 1.0x0.6A ±0.05 ±0.05 ±0.05
(8 mm)
0.40
±0.05
D1
E
E1
1.50
8.00
1.75
±0.10 +0.3/-0.1 ±0.10
E2
3.50
±0.05
P0
2.00
±0.05
P1
4.00
±0.10
T
P2
0.23
2.00
±0.05 ±0.02
B
0.61
DFN 1.0x0.6/ 0.65 1.05
DFN 1.0x0.6A ±0.04 ±0.04 ±0.04
(8 mm)
0.40
±0.05
1.50
8.00
1.75
±0.10 +0.3/-0.1 ±0.10
3.50
±0.05
2.00
±0.10
4.00
±0.10
2.00
0.20
±0.05 ±0.05
D0
Reel
W1
S
G
N
M
K
V
R
H
W
UNIT: mm
Tape Size Reel Size
8mm
ø178
M
ø178
±0.5
N
ø55
±1
W
8.4
+1.5/-0
W1
Max.
14.4
H
ø13.0
±0.5
K
Max.
10.1
S
2.0
±0.5
G
N/A
R
N/A
V
N/A
Leader / Trailer & Orientation
TVS
Unit Per Reel:
10000pcs
Trailer Tape
300mm Min.
Components Tape
Orientation in Pocket
Leader Tape
500mm Min.
Trailer Tape
300mm Min.
Components Tape
Orientation in Pocket
Leader Tape
500mm Min.
MOS
Unit Per Reel:
10000pcs
Rev. 3.0 January 2016
www.aosmd.com
Page 6 of 7
AOZ8831-03
Part Marking
4
Product Number Code
Date Code
LEGAL DISCLAIMER
Alpha and Omega Semiconductor makes no representations or warranties with respect to the accuracy or
completeness of the information provided herein and takes no liabilities for the consequences of use of such
information or any product described herein. Alpha and Omega Semiconductor reserves the right to make changes
to such information at any time without further notice. This document does not constitute the grant of any intellectual
property rights or representation of non-infringement of any third party’s intellectual property rights.
LIFE SUPPORT POLICY
ALPHA AND OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
Rev. 3.0 January 2016
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
www.aosmd.com
Page 7 of 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement