Beyerdynamic CA 4146 Spec sheet
Add to my manuals1 Pages
Beyerdynamic CA 4146 is a power supply unit used to power up to 45 devices, including microphone units and adapters, when working with the MCS-D 200 control unit. It features four push-pull sockets: two Data Ports for audio and control signal transfer, and two Extension Ports for powering connected devices. The unit is redundant, meaning that even if one power supply fails, the others will continue to provide power.
advertisement
CA 4146
Power Supply Unit
Order # 486.779
F
EATURES
• Power on LED
• Connectors on the rear
• Push-pull connectors
• Power distribution via power cable and connectors or
NetRateBus connector (push-pull)
• 2 Bus-Power out connectors for microphone units
• 2 Extension Ports to connect microphone units
• 2 Data Ports to connect the MCS-D 200 control unit,
CA 4146, power supply unit or
CA 4522/44/56 Digital/Analog-Interface
A
PPLICATIONS
The CA 4146 power supply unit is used when more than
30 devices are to be used with the MCS-D 200 control unit. The
CA 4146 power supply unit can be used as a desktop device or mounted into a 19" rack.
One CA 4146 power supply unit can power up to 45 devices
(e.g. microphone units, adaptors). Please note this is only a theoretical value. The actual number of devices (e.g. microphone units, adaptors) also depends on the cable length.
The CA 4146 power supply unit is also redundant as device:
If one power supply unit fails to operate, the other power supply units provide the required power even when the failed power supply unit is hot-wired.
The power supply unit provides 4 push-pull sockets: two Data Ports and two Extension Ports.
The Data Ports are passive connectors, i.e. the connected devices are not powered via the integrated power supply of the CA 4146.
The Data Ports transfer audio and control signals. They are used to connect to the control unit and other power supply units.
The Extension Ports are active connectors, i.e. the connected devices (e.g. microphone units or adapters) are supplied via the internal power supply of the CA 4146.
T
ECHNICAL
S
PECIFICATIONS
Mains voltage . . . . . . . . . . . . . . . . . . . . . 100 250 V AC 50/60 Hz
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.3 AT
Power consumption . . . . . . . . . . . . . . . . 330 W
Output current . . . . . . . . . . . . . . . . . . . . max. 6 A DC
Temperature range with humidity < 90% . . . . . . . . . . . . . . . +10 °C - +40 °C
Dimensions (W x H x D) . . . . . . . . . . . . . 19 " 2 U
(440 x 88 x 310 mm)
System connectors . . . . . . . . . . . . . . . . . 2 x push-pull, 6-pin,
Type Lemo/ODU
Extension connectors . . . . . . . . . . . . . . . 2 x push-pull, 6-pin,
Type Lemo/ODU
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 5200 g
O
PTIONAL
A
CCESSORIES
CA 4302 NetRateBus cable, push-pull connector, length 2 m . . . . . . . . . . . Order # 483.361
CA 4305 same as above, but length 5 m . . . . Order # 483.370
CA 4310 same as above, but length 10 m. . . . Order # 483.389
CA 4320 same as above, but length 20 m. . . . Order # 483.397
CA 4300 NetRateBus cable, sold by metre. . . . Order # 483.354
1 of 1 beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 224 [email protected] | www.beyerdynamic.de
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E1 / CA 4146 (12.08)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project