SF Circuit Breaker(file, 983KB)

SF Circuit Breaker(file, 983KB)
Medium Voltage Distribution
SF circuit breakers
24kV.40kA .3000A
withdrawable Type
Catalogue
SF F400 circuit breakers
withdrawable version
Presentation
PE56502
Device description
The basic withdrawable version of the SF circuit breaker comprises:
b the circuit breaker unit with its control mechanism:
v 3 main independent poles, that are mechanically linked and each comprising
a “sealed pressure system” type insulating enclosure. The sealed enclosure is filled
with low pressure SF6 gas
v a GMH stored energy electrical operating mechanism
This gives the device an closing and opening speed that is independent
of the operator, whether the control order is electrical or manual.
When remotely controlled, the circuit breaker allows reclosing cycles
to be performed
v a front face with status indicators
b racking components:
v the circuit breaker is equipped with racking arms and clusters. It is mounted
on a racking/unracking unit with a threaded shaft actuated by a crank which includes
all of the safety interlocking systems
v a Harting type male LV connector for external auxiliary circuits.
The SF circuit breaker is only available with front controls.
Each device can be fitted with the following options:
b position locking of the circuit breaker:
v open, by a keylock installed on the control panel
v racked out, by a keylock installed on the racking device
b the M1 and M2 basic cassettes comprising:
v a metal structure and one guide rail
v fixed connector fingers insulated by bushings
v metal insulating shutters for the MV part
v safety interlocking systems
v Harting type female LV connector
v indicator contacts for circuit breaker racked-in or racked-out positions
(4 NO + 4NC)
v a circuit breaker control mechanism spring discharge system
v a circuit breaker racking-in blocking mechanism
v an equipped door
v a foolproofing system for the circuit breaker rating.
Applications
SF circuit breakers are 3-pole MV circuit breakers for indoor installation.
They are mainly used for switching and protection of networks from 24 to 40.5 kV
in primary and secondary power distribution.
The autocompression breaking technique used in these circuit breakers means that
making or breaking all types of compacitive or inductive currents can be achieved
without dangerous overvoltages for the switchgear connected to the network.
The SF circuit breaker is therefore well suited to operating capacitor banks.
1
General characteristics
SF F400 circuit breakers
withdrawable version
Electrical characteristics according to IEC 62271-100
SF F400
Ur
kV 50/60 Hz
24
36
40,5
- power frequency withstand
Ud
kV 50 Hz 1min
50
70
85
85
- lightning impulse withstand
Up
kV peak
125
170
185
185
Rated current
Ir
A
–
b **
b
–
b
b
b
b
b
–
b
–
Short circuit current
Short time withstand current
Isc
Ik/tk
kA
kA/3 s
40
40
25 *
25
31.5
31.5
40
40
25
25
31.5
31.5
Short-circuit making current
Ip
kA peak
50 Hz
100
62.5
79
100
62.5
79
60 Hz
104
–
82
104
65
82
O-3 min-CO-3 min-CO
b
b
b
b
b
b
O-0.3 s-CO-3 min-CO
–
b
b
–
b
b
O-0.3 s-CO-15 s-CO
–
b
–
–
–
–
b
b
b
b
b
b
b
b
b
b
b
b
Rated voltage
Insulation voltage
Rated switching sequence
1250
2500
Phase to phase
Operating mechanism
mm
Frontal
Operating times
Opening (ms)
< 50
Breaking (ms)
Closing (ms)
< 60
< 65
°C
–25 to +40
Class
M2
Service temperature
Mechanical endurance
T
300
Number of switching operations
10,000
Electrical endurance
Class
E2
Capacitive current breaking capacity
Class
C2
b Available
– Not available
(*) Only 50 Hz possible
(**) 3000 A possible (please consult us).
Specific applications
Switching and protection of capacitor banks
SF range circuit breakers are particularly well suited to switching and protection
of capacitor banks; they are classed C2 according to standard IEC 62271-100.
Tests carried out according to the standard for breaking at 400 A with making
and breaking cycles in case of a capacitor bank with a making current of 20 kA.
Additional tests have been carried out: please consult us.
2
SF F400 circuit breakers
withdrawable version
Description of functions
Racking-in
DE57396
Overall composition
The “racking-in/racking-out” function is achieved by:
b the SF F400 withdrawable circuit breaker with its LV connector (moving part)
b the M1 or M2 cassettes with their bushings (fixed part).
Switching the circuit breaker
The withdrawable circuit breaker can be moved between three stable positions:
b service position: the circuit breaker racked-in and locked in position,
the LV connector is connected
b test position: the circuit breaker is racked-out and locked in position,
the LV connector is connected
b disconnected position: the circuit breaker is racked-out and locked in position,
the LV connector is disconnected.
SF F400 circuit breaker safety functions
DE57430
A racking system with a threaded shaft makes it easier to rack-in and rack-out.
Test position contact
This is activated when the circuit breaker is in the “test” or “service” positions.
Earthing is achieved throughout the operation through the racking carriage wheels.
DE57429
Service position Test
Interlocking
In conformity with standards IEC 62271-100 and 62271-200, the following interlocks
are available:
b prohibiting racking-in or racking-out if the circuit breaker is not in the open position
b prohibiting racking-in of the circuit breaker if the LV connector is not connected
b prohibiting disconnecting of the LV connector if the circuit breaker is not racked-out.
Interlocking with the cubicle door
The racking base is equipped with a device that allows interlocking between
racking-out of the circuit breaker and the cubicle door.
b only possible to rack-in the circuit breaker if the door is closed
b only possible to open the door if the circuit breaker is racked-out.
This device must be disabled if this interlocking function is not present.
DE57428
position disconnected
M1 and M2 cassettes safety features
The M1 or M2 cassettes are fitted with the SF F400 circuit breaker and comprise
the following safety features for racking-in.
A metal structure with one guide rail
The rail guides the circuit breaker during racking-in/racking-out operations.
PE50198
position
Fixed connector fingers, insulated by bushings
The three ends of the circuit breaker, with their racking clusters, make the contact
with these three fingers.
Metal insulating shutters for the MV part
Protective shutters mounted on the structure stop fingers from accessing the racking
mechanism when the circuit breaker is extracted (protection index: IP2X).
Safety interlocking systems
When carrying out maintenance operations it is possible to:
b padlock the shutters in the locked position
b unlock the fixed contact access mechanism.
A control spring discharge system
The springs of the circuit breaker mechanism are automatically discharged when
it is extracted from the cassette. This function avoids any risk of nuisance closing
of the circuit breaker.
Volets de protection
Protective shutters
3
Foolproofing system
This allows the circuit breaker rating to be matched to the cassette rating.
This system is mounted on the cassette side. The panel builder must ensure
that the right circuit breaker rating is being used.
SF F400 circuit breakers
withdrawable version
Description of functions
Racking-in (cont.)
PE50201
Possibilities for padlocking
For further operator safety it is possible to use a padlock:
b on the connector to lock the selector
b on the shutter protecting the mechanical opening pushbutton
b on the shutter opening mechanism in the circuit breaker compartment
b on the rotary voltage transformer switching mechanism.
PE50202
A mechanism to prohibit racking-in of the moving part
A mechanism associated with a padlock or a keylock prohibits the racking-in
of the moving part. Locking is either achieved via:
b 1 to 3 padlocks, not supplied
b 1 keylock (optional).
PE50204
A blocking system for the circuit breaker opening order, when it is closed
This device can also be used as an additional way of prohibiting racking-in and out.
A transparent shutter blocks access to the opening and closing pushbutton.
The device allows independent locking of the opening or closing button.
It is often associated with an electrical motor (M). Locking is achieved by
a padlock (not supplied) mounted on the shutter protecting the mechanical
opening pushbutton.
PE50205
Locking/interlocking functions
A system to prohibit disconnection of the moving part
This keylocking system prohibits disconnection of the moving part. It may be used
for a circuit breaker or for a racking base.
Optional accessories
b a self-adhesive front plate shows circuit breaker racking-in and racking-out
operations. It is systematically delivered when the circuit breaker is ordered
with the cassette or can be ordered separately.
b 4 “racked-in/racked-out” position contacts.
b 1 position contact for the cassette locked in the “racked-in/racked-out” position.
b a keylocking system (Ronis or Profalux) for the circuit breaker in the “racked-in”
or “racked-out” position.
4
Description of functions
SF F400 circuit breakers
withdrawable version
MV and LV connection
MV Connection
PE50195
PE50194
The customer connection is easily carried out from the back of M1 and M2 cassettes
using the upper and lower bushings.
MV connection with M1 cassette
MV connection with M2 cassette
LV connection
With the withdrawable circuit breaker, LV wiring uses an LV connector with:
b the moving part (male Harting socket) at the end of a flexible cable, entirely
connected to the control mechanism terminal via a bellow
b the fixed part (female Harting socket) compatible with the male part mounted
on the top inside part of the cassette.
PE50197
Interlocking function
In conformity with standard IEC 62271-200, an interlocking function prohibits:
b racking-in when the LV connector is not connected
b disconnection of the LV connector if the circuit breaker is in the racked-in position.
LV plug connection
5
Description of functions
SF F400 circuit breakers
withdrawable version
GMH stored energy operating mechanism
Wiring diagram
028368
Operation of the electrical GMH stored energy mechanism
This gives the device an opening and closing speed that is independent of the
operator whether the order is electrical or manual.
The electrical control mechanism carries out reclosing cycles and is automatically
recharged by a geared motor each time after closing.
It consists of:
b the stored energy operating mechanism which stores in springs the energy
required to open and close the device
b a manual lever arming device for the springs
b an electrical arming device with a motor to automatically rearm the control
mechanism as soon as the circuit breaker is closed (optional)
b manual push-button controls on the front face of the circuit breaker (red and black)
b an electrical remote-closing device comprising a release and an anti-pumping relay.
b an electrical opening device comprising one or several releases of the following
type:
v shunt opening
v undervoltage
v Mitop, low energy release.
b an operation counter
b an open/closed position indicator with a mechanical indicator (black and white)
b an “armed” control mechanism status indicator with a mechanical indicator
and an electrical contact (optional)
b a block of 14 auxiliary contacts, available according to the wiring layout used
b a pressure switch contact activated by a drop in gas pressure (optional: single
or double threshold pressure switch).
DE57420EN
Wiring diagram (principle)
Close CB
Open CB
M
M3
YF +
anti-pumping
Motor
Shunt closing
release
+ anti-pumping
system
Remote control
6
YO1
“Control
mechanism
armed”
indicator contact
YO2
Shunt
opening
release
YM
Undervoltage
release
Mitop
Low energy
release
(Mitop)
Changeover
contact
Pressostat
NO
NC
contacts contacts
Description of functions
SF F400 circuit breakers
withdrawable version
Opening circuit
DE57421EN
Composition
(1)
The opening circuit can be produced using the following components:
b a shunt opening release (on energizing) (YO1)
b a second shunt opening release (on energizing) (YO2)
b undervoltage release (YM)
b low energy release (Mitop).
Note: see the table of the releases’ combinations page “Order form” .
Shunt opening release (YO1 and YO2)
Energizing this unit causes instant opening of the circuit breaker.
(1) or (2)
or (3)
Characteristics
Power supply
Threshold
See “Order form” page
V AC
V DC
V AC
V DC
Consumption
DE58092
Operating mechanism
0.85 to 1.1 Ur
0.7 to 1.1 Ur
160 VA
50 W
Undervoltage release (YM)
DE57390
Shunt opening release (1)
This release unit causes the systematic opening of the circuit breaker when its
supply voltage drops below a value less than 35% of the rated voltage, even if this
drop is slow and gradual. It can open the circuit breaker between 35% and 70% of
its rated voltage. If the release unit is not supplied power, manual or electrical closing
of the circuit breaker is impossible. Closing of the circuit breaker is compulsory when
the supply voltage of the release unit reaches 85% of its rated voltage.
Characteristics
Power supply
Threshold
Consumption
Latched
Undervoltage release (2)
DE58094
Triggering
See “Order form” page
Opening
Closing
V AC
V DC
V AC
V DC
0.35 to 0.7 Ur
0.85 Ur
400 VA
100 W
100 VA
10 W
Low energy release (Mitop)
This specific release unit comprises a low consumption unit.
Characteristics
Low energy release (3)
Power supply
Threshold
Direct current
0.04 A < I < 0.12 A
Any tripping due to the Mitop release unit is momentarily indicated by an SDE type
changeover contact (option).
7
SF F400 circuit breakers
withdrawable version
Description of functions
Remote control
DE57422
Function
Remote control enables the remote opening and closing of the circuit breaker.
Composition
The remote control mechanism comprises:
b an electrical motor with gearing
b a shunt closing release (YF) combined with an anti-pumping device
b an operation counter.
Electrical motor (M)
The electrical motor carries out the automatic rearming of the stored energy unit as
soon as the circuit breaker is closed. This allows the instant reclosing of the device
after opening. The arming lever is only used as a backup operating mechanism
in the case of the absence of the auxiliary power supply.
The M3 contact indicates the end of arming operations.
Characteristics
DE57392
Operating mechanism
Electrical motor (4)
Power supply
Threshold
Consumption
See “Order form” page
V AC/V DC
V AC
V DC
0.85 to 1.1 Ur
380 VA
380 W
Shunt closing release (YF)
DE58092
This release allows the remote closing of the circuit breaker when the operating
mechanism is armed.
Characteristics
Power supply
Threshold
Shunt closing release (5)
Consumption
See “Order form” page
V AC
V DC
V AC
V DC
0.85 to 1.1 Ur
0.85 to 1.1 Ur
160 VA
50 W
DE57393
The shunt closing release is combined with an anti-pumping relay that enables priority
to be given to opening in the case of a permanent closing order. This thus avoids
the device being caught in an uncontrolled opening-closing cycle.
Operation counter (6)
Operation counter
The operation counter is visible on the front panel.
It displays the number of switching cycles (CO) that the device has carried out.
8
SF F400 circuit breakers
withdrawable version
Description of functions
Indication and locking/interlocking
DE57423
“Open/closed” auxiliary contacts
The number of contacts available depends on the options chosen on the operating
mechanism.
In the basic configuration, the circuit breaker’s operating mechanism comprises
a total of:
b 5 normally closed contacts (NC)
b 5 normally open contacts (NO)
b 1 changeover contact (CHG).
The usage procedure for auxiliary contacts is given in the following table:
Options
Shunt opening release (each one)
Undervoltage release
Low energy release (Mitop)
DE57394
Operating mechanism
NC contact
0
0
0
NO contact
1
0
0
In order to know the final number of available contacts, you must deduct the total
number of contacts included in the circuit breaker (5 NC + 5 NO + 1 CHG),
the number of contacts used given in the table above.
E.g.: a circuit breaker equipped with a remote control and a shunt trip unit has
the following available contacts:
5 NC + 4 NO + 1 CHG.
With a undervoltage release instead of the shunt trip, this circuit breaker would have
the following available contacts:
5 NC + 5 NO + 1 CHG.
Shunt opening release combination
DE57395
Auxiliary contacts (7)
1st release Shunt opening
release YO1
2nd release
Without
5NC + 4NO + 1CHG
Shunt opening release 5NC + 3NO + 1CHG
YO2
Undervoltage release 5NC + 4NO + 1CHG
YM
Mitop
5NC + 4NO + 1CHG
Undervoltage release
YM
5NC + 5NO+ 1CHG
5NC + 4NO+ 1CHG
Mitop
5NC + 4NO + 1CHG
5NC + 5NO + 1CHG
5NC + 5NO + 1CHG
Keylocking kit (8)
Locking the circuit breaker in the “open” position
This key-operated device allows the circuit breaker to be locked in the “open” position.
The circuit breaker is locked in the open position by blocking the opening push button
in the “engaged” position.
Locking is achieved using a Profalux or Ronis captive key type keylock.
9
Description of functions
SF F400 circuit breakers
withdrawable version
Safety functions
This table describes the safety functions available on the SF circuit breaker
withdrawable version.
How to use the table
Each of the boxes describes the functional status of each circuit breaker position
and the associated parts:
Possible status
Possible status, impossible operation
Impossible status
Parts
Circuit breaker positions
Insertion
Racking-in
Extraction
Removed
Racking-out
Disconnected Test position
Service
Fool-proof
protection (1)
1 - Cassette
No opening shutters
Shutters padlocking possible
2 - LV plug
Disconnected
No door closing
No unplugging (4)
Connected
3 - Circuit breaker
Closed
Open
Auto-discharge
function (2)
No racking-in
No racking-out
No closing
Open position circuit breaker locking available (2)
4 - Switchboard door
Open
Closed
No racking-in
No door opening (3)
(1) This protection mechanism ensures that the performance levels of the circuit breaker correspond with those of the cassette..
(2) Option.
(3) Interlocking device to be fitted to the cubicle door.
(4) Because the door is closed.
10
Dimensions
SF F400 circuit breakers
withdrawable version
Basic withdrawable unit
Dimensions (mm)
1250 A
2500/3000 A
A
B
C
738
540
2030
752
533
2030
D
36
40
750
850
1250 A
1278
2030
36
750
1285
2030
40
850
DE57433
Weight (kg)
DE57432
Dimensions and weights
DE57431
SF F400/M1
Dimensions (mm)
2500 A
DE57433
Weight (kg)
A
C
D
11
DE57442
Dimensions and weights
DE57441
SF F400/M2
Dimensions (cont.)
SF F400 circuit breakers
withdrawable version
Connection
SF F400/M1
2500/3000 A
DE57438
DE57437
1250 A
SF F400/M2
12
2500 A
DE57444
DE57443
1250 A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement