Aplex ADP-1170 User manual

Aplex ADP-1170 User manual
ADP-1120/ADP-1150/ADP-1170/ADP-1190
Display Monitor User Manual
Release Date
Revision
April 2005
May 2007
Aug. 2007
®2005 Aplex Technology, Inc.
V0.1
V0.2
V0.3
All Rights Reserved.
Published in Taiwan
Aplex Technology, Inc.
9F-5, No. 2, Jian Pa Road, Chung Ho City, Taipei County, Taiwan
Tel: 886-2-82262881
Fax: 886-2-82262883
E-mail: [email protected] URL: www.aplex.com.tw
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
1
Warning!___________________________________
This equipment generates, uses and can radiate radio frequency energy and if not installed and
Used in accordance with the instructions manual may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
FCC Rules, which are designed to provide reasonable protection against such interference when
Operated in a commercial environment. Operation of this equipment in a residential area is likely
To cause interference in which case the user at his own expense will be required to take whatever
Measures may be required to correct the interference
Electric Shock Hazard – Do not operate the workstation with its back cover removed. There are
dangerous high voltages inside.
Disclaimer
This information in this document is subject to change without notice. In no event shall Aplex Technology
Inc. be liable for damages of any kind, whether incidental or consequential, arising from either the use or
misuse of information in this document or in any related materials.
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
2
Table of Contents______________________
Warning!…………………………………………………………………………….……..….2
Disclaimer………………………………………………………………….…………………2
Chapter 1
Getting Started
1.1 Features………………………………………………………….…..…..…4
1.2 Specifications…………………………………………. ...……………...….4
1.3 Dimensions…………………………………...………………………….…6
1.4 Brief Description...................................................................................10
1.5 Display Mode………………………………………………………………11
Chapter 2
2.1
2.2
2.3
2.4
OSD
Front Panel Controls………….………………………………….…..……12
OSD Controls………………………………………………………………12
Main Menu…..……………………………………………………………..13
AD Board (TB-6020) OSD Functions……………………………………15
Figures
Figure
Figure
Figure
Figure
Figure
Figure
1.1: Dimensions of ADP-1120….……………………………………..6
1.2: Dimensions of ADP-1150….……………………………………..7
1.3: Dimensions of ADP-1170…..…………………………………….8
1.4: Dimensions of ADP-1190…..…………………………………….8
1.5: Overall View……………………………………………………….10
1.6: Rear View…………………..……………………………………...10
Appendix
Panelmounting…..…………………………………………………………….16
Rackmounting…..……………………………………………………………..16
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
3
Chapter 1_____________________________
1.1 Features
ADP-1120
ADP-1150
ADP-1170
ADP-1190
Display
12.1” TFT SVGA LCD
15” TFT XGA LCD
17” TFT SXGA LCD
19” TFT SXGA LCD
Luminance
300 cd/m²
400 cd/m²
300 cd/m²
250 cd/m²
Front panel NEMA 4/IP 65 rating
Wall-mount screw holes
Resistive touch screen (optional)
Optional DVI, Video or S-Video input∘
Supports wide-ranging resolutions from 640x480 to up to 1600 x 1200
with auto phase and auto position.
1.2 Specifications
Display
ADP-1120
ADP-1150
ADP-1170
ADP-1190
Display
12.1”
15”
17”
19”
Luminance
300 cd/m²
400 cd/m²
300 cd/m²
250 cd/m²
Viewing Angle
120(H)x95(V)
140(H)x125(V)
140(H)x130(V)
140(H)x130(V)
Resolution
800x600,
1024x768,
1280x1024,
1280x1024,
16.2M colors
16.2M colors
16.2M colors
16.2M colors
CCFL tube x 2,
CCFL tube x 4
CCFL tube x 4
CCFL tube x 4
50,000hrs
50,000hrs
50,000hrs
50,000hrs
(1/2 brightness)
(1/2 brightness)
(1/2 brightness)
(1/2 brightness)
Resistive
Resistive antiglare
Resistive antiglare
Resistive antiglare
Backlight
Touch Screen
antiglare
OSD
Automatic screen, setup (OSD), brightness, contrast, horizontal/vertical position, image
Controls/Indicators
lock, color balance, video information, power on and sync detected
OS Compatibility
Internal Power
Win 95/98, XP, 2000, NT 4.0, QNX, Linux
Input: 100~240 ±10% VAC, auto ranging, output: [email protected]
Adapter
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
4
Environment
Operating Temperature: 0~50°C (32°~122°F)
Storage Temperature: -20~60°C (-4°~140°F)
Relative Humidity: 10~90% @40°C non-condensing, without touch screen
Vibration: 1g peak, 5~500Hz (at random)
Shock: 15G peak acceleration (11msec. duration)/operation
Ratings: NEMA 4/12, IP65
Certifications: CE/FCC Class A
Mechanical
ADP-1120
ADP-1150
ADP-1170
ADP-1190
Steel chassis and
Steel chassis and
Steel chassis and
Steel chassis and
front panel
front panel
front panel
front panel
390x63x265
410x69x310mm
457x75x355
484x71.7x400
(Wx Dx H / mm)
(Wx Dx H / mm)
(Wx Dx H / mm)
(Wx Dx H / mm)
372(W)x246mm(H)
392(W)x292mm(H)
422(W)x331mm(H)
448(W)x360mm(H)
Mounting
Panel mount, rack
Panel mount, rack
Panel mount, rack
Panel mount, rack
Options
mount (optional)
mount (optional)
mount (optional)
mount (optional)
Construction
Dimensions
Dimensions
Cutout
Weight
Ordering Information
ADP-1120
12.1” industrial display monitor (steel bezel)
ADP-1120T
12.1” industrial display monitor (steel bezel) with resistive touch screen
ADP-1150
15” industrial display monitor (steel bezel),
ADP-1150T
15” industrial display monitor (steel bezel) with resistive touch screen
ADP-1170
17” industrial display monitor (steel bezel)
ADP-1170T
17” industrial display monitor (steel bezel) with resistive touch screen
ADP-1190
19” industrial display monitor (steel bezel)
ADP-1190T
19” industrial display monitor (steel bezel) with resistive touch screen
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
5
1.3 Dimensions
Figure 1.1: Dimensions of the ADP-1120
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
6
Figure 1.2: Dimensions of the ADP-1150
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
7
Figure 1.3: Dimensions of the ADP-1170
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
8
Figure 1.4: Dimensions of the ADP-1190
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
9
1.4 Brief Description of the
ADP-1120, ADP-1150, ADP-1170 & 1190
The ADP-1120, the ADP-1150, the ADP-1170 and the ADP-1190 feature an excellent viewing ability
for monitoring and control applications. It is available with resistive touch screen that is easy to use
and maintain.
The front panel of the display monitor is sealed with gasket for NEMA 4/IP 65 rating when it is
panel-mounted in a NEMA rated cabinet or enclosure.
Figure 1.4: Overall View of
ADP-1120 (12.1”), ADP-1150 (15”), ADP-1170 (17”) & ADP-1190(19”)
Figure 1.5: Rear View of
ADP-1120 (12.1”), ADP-1150 (15”) & ADP-1170 (17”), & ADP-1190(19”)
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
10
1.5 Display Mode
Display Mode
Hori. Sync (KHz)
Vert. Sync. (Hz)
31
60
38
72
38
75
35
56
38
60
48
72
47
75
48
60
56
70
60
75
68
75
64
60
80
75
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
1152 x 864
SXGA
1280 x 1024
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
11
Chapter 2_____________________________
2.1 Front Panel Controls
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
2.2 OSD Controls
To make any adjustment, select the following:
1. Press
(Menu) to show the OSD menu or disable the OSD menu.
2. Select the icon that you wish to adjust with the (
/
or +/-) key in the menu.
3. Press
(Menu) and then choose the item with the (
4. Press
(Menu) and then adjust the quality with the (
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
or +/-) key.
/
/
or +/-) key.
12
2.3 Main Menu
In the Main menu, there are the following items:
z Color
z Image Setting
z Position
z OSD Menu
z Language
z Misc
z Exit
For Color, check out the following:
z Contrast
z Brightness
z Color Adjust
z Color Temp
z Back
For Image setting, check out the following:
z Clock
z Phase
z Gamma
z Sharpness
z Back
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
13
In the Position, there are the following:
z H. Position
z V. Position
z Back
In the OSD menu, there are:
z
z
z
z
OSD H. Pos.
OSD V. Pos.
OSD Timer
Back
In the Language menu, there are:
z
z
z
z
z
z
z
English
Frances
Germany
Spanish
Traditional Chinese
Simplified Chinese
Japanese
In the Misc menu, there are:
z Signal Source
Select VGA: Analogue VGA Input
Select DVI: Digital DVI-D Input
Select AV: Composite Video Input
Select SV: S-Video Video Input
z Reset
z Back
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
14
2.4 AD Board (TB-6020) OSD Functions
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don’t let them go)
the
buttons until the AC power cord is connected and the “RGB” appears on the top left corner
of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the
button and don’t let them go) until the AC power cord is
connected. Please don’t let your fingers go until the AC power cord is connected again and the
wording of “RGB” appears on the top left corner of your screen, and wait for 3 second. Under the
non-signal entry situation, if Cable Not Connected
is seen, exit is thus successfully made.
When the Burn-in Mode is Unable to Eradicate…
1.)
If the “RGB” is still on the top left corner of the screen, press
choose “Reset”, and then Yes, and press
to enter “Miscellaneous” and
. When the screen goes black, disconnect power and
repeat the above steps.
buttons
2.)
If the “RGB” is not found, disconnect the AC power cord first. Then press the
3.)
(don’t let them go) until the AC power cord is connected, and wait for 2 to 3 seconds. When
“RGB” appears, repeat the above steps.
Functions of OSD Keys
Auto Adjust
Up/Left Down/Right Power
Menu/Entry
Power Indicator
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
15
Appendix_____________________________
Panel Mounting
The ADP-1120/1150/1170/1190 display monitor is designed to be panel-mounted as shown in Figure A.
Just carefully place the unit through the hole and tighten the given 8 screws from the rear to secure
the mounting.
Figure A: Panelmounting of the ADP1120/1150/1170/1190
Rack Mounting (optional)
The ADP-1120/1150/1170/1190 display monitor can be rack-mounted as an option. Just carefully slide
it into the rack and tighten the given 8 screws from the front to secure the mounting as shown in Figure
B.
Figure B: Rackmounting of the ADP1120/1150/1170/1190
ADP-1120/ADP-1150/ADP-1170/ADP-1190 User Manual
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement