Meridian DSP3200 User guide
DSP3200
User Guide
EN
DSP3200 User Guide
Important safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
This apparatus has been designed with Class 1 construction and
must be connected to a mains socket outlet with a protective earthing
connection (the third grounding pin).
This apparatus does not include a power switch. The apparatus may be
isolated from mains power either by unplugging the power connector from
the rear of the unit, or by unplugging the connector at the opposing end
of the power cord or cable from its supply outlet. As a result, either or
both of these connectors should remain accessible
CAUTION: This DSP3200 for use only with the Meridian DSP3200
Stand, part number SP5543. Use with other stands is capable of
resulting in instability causing possible injury.
Safety warnings
• Do not expose the unit to dripping or splashing.
• Do not place any object filled with liquid, such as a vase, on the unit.
• Do not place naked flame sources, such as lighted candles, on
the unit.
• To avoid overheating leave at least 10cm around the equipment to
ensure sufficient ventilation.
• Do not position the unit in direct sunlight, near heat sources such as
a radiator, or directly on top of heat producing equipment, such as a
power amplifier.
• To avoid interference do not position the unit near strong electrical or
magnetic radiation, such as near a power amplifier.
Radio interference
FCC Warning: This equipment generates and can radiate radio
frequency energy and if not installed and used correctly in accordance
with our instructions may cause interference to radio communications
or radio and television reception. It has been type-tested and complies
with the limits set out in Subpart J, Part 15 of FCC rules for a Class
B computing device. These limits are intended to provide reasonable
protection against such interference in home installations.
EEC: This product has been designed and type-tested to comply
with the limits set out in EN55013 and EN55020.
Copyright
Meridian Audio Ltd
Latham Road
Huntingdon
Cambridgeshire
PE29 6YE
England
Copyright © 2010 Meridian Audio Ltd.
Visit us on the Web:
http://www.meridian-audio.com
Part no: DSP3200 (P88394)
This guide was produced by: Human-Computer Interface Ltd,
http://www.interface.co.uk/
EN
N
EN
DSP3200 User Guide
Unpacking
The DSP3200 is supplied with the following accessories:
If either of these items are missing please contact your dealer.
• Power cord.
• This manual.
NOTE: You should retain the packaging in case you need to
transport the units.
Connections
Digital connections
The following diagram gives details of the connections on
the base of the speaker:
Use this connection
To connect to this
SpeakerLink input
The SpeakerLink output of a Meridian
Sooloos component, Digital Surround
Controller, or Audio Core 200.
SpeakerLink output
The Speakerlink input of a second
DSP3200 digital speaker, when daisychaining the speakers.
SpeakerLink
input output
SpeakerLink
Power
L/C
Fuse
Input
R
Digital Channel
Selector
Power
Inlet
Output
220-240V ~50-60 Hz 200W max
Channel
selector
Standby indicator
The status of the DSP3200 is shown by a green standby
indicator on the back panel.
Status
Description
Dimly illuminated
Speaker in standby
Brightly illuminated
Speaker operating
The speakers are switched on or into standby as appropriate via
the SpeakerLink connections by the Meridian system they are
connected to.
Miscellaneous
Switch
Description
Digital Channel Selector
Set to L/C to use the speaker as a left
or centre channel speaker. Set to R
to use the speaker as a right channel
speaker.
DSP3200 User Guide
EN
Applications
To connect a pair of DSP3200s to a Meridian
Audio Core 200
• Connect the upper SpeakerLink output on the AC200 to the
Slave DSP3200, using a Meridian SpeakerLink lead.
The DSP3200s are ideal for a compact Audio Core 200 based
system.
• Make sure the Channel selector is set to the L/C position on
the back of the left speaker and to the R position on the back
of the right speaker.
• Connect the lower SpeakerLink output on the AC200 to the
Master DSP3200, using a Meridian SpeakerLink lead.
Meridian Audio Core 200
DSP3200 – Slave
MERIDIAN
SPEAKERLINK
DSP3200 – Master
MERIDIAN
SPEAKERLINK
SPEAKERLINK
IN
OUT
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
EN
N
DSP3200 User Guide
EN
To use a pair of DSP3200s in a Meridian
Digital Theatre
DSP3200s are ideal as the rear loudspeakers in a Meridian
Digital Theatre, in conjunction with a Meridian Digital Surround
Controller such as the G68. The following diagram shows how
to connect the speakers using “home run” wiring.
• Connect the L+R SpeakerLink output on the lower row of
the G68 to the Master digital speaker (here the front left
speaker), using a Meridian SpeakerLink lead.
• Connect the appropriate SpeakerLink outputs on the G68 to
each of the remaining speakers, using Meridian SpeakerLink
leads.
• Make sure the Channel selector on each DSP3200 is set to
the L/C position on the back of the left speaker and to the R
position on the back of the right speaker.
Alternatively you can connect the speakers using “daisy chain”
wiring: connect the front and rear L speakers to the G68, and
then link each pair of speakers together by connecting the
output from the L speaker to the input of the R speaker.
Meridian Surround Controller
DSP3200 – Rear R
MERIDIAN
SPEAKERLINK
DSP3200 – Rear L
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
Front R – Slave
Centre – Slave
Front L – Master
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
SpeakerLink lead
SpeakerLink lead
DSP3200 User Guide
EN
To create a stand-alone Sooloos system
The DSP3200s can be connected directly to a Meridian Media
Core 200 to make an ideal compact Sooloos system.
You can browse and control music on the system using the
Sooloos application on an iPad, iPhone, or iPod Touch, or the
Control:PC/Control:Mac application on a computer.
• Connect the Network socket on the Media Core 200 to one
of the LAN network connections on your Router, using a
CAT5 cable.
• Make sure the WAN/Internet port on the Router is connected
to the rest of your network, or to your Cable/DSL Modem.
• Connect the SpeakerLink output on the Media Core 200 to
the Master DSP3200 SpeakerLink input, using a Meridian
SpeakerLink lead.
• Connect the SpeakerLink output from the Master DSP3200
to the SpeakerLink input of the Slave DSP3200, using a
Meridian SpeakerLink lead.
For information on configuring your Media Core 200 please
refer to the Media Core 200 User Guide.
Media Core 200
NETWORK
DSP3200 – Master
DSP3200 – Slave
MERIDIAN
SPEAKERLINK
Router
MERIDIAN
SPEAKERLINK
SPEAKERLINK
OUT
INPUT OUTPUT
INPUT OUTPUT
SpeakerLink lead
Internet
SpeakerLink lead
EN
N
EN
DSP3200 User Guide
DSP3200 User Guide
EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement