Brochure SCALANCE X Industriële switches

Brochure SCALANCE X Industriële switches
© Siemens AG 2011
Industrial Ethernet Switches
Brochure · November 2011
SIMATIC NET
Answers for industry.
© Siemens AG 2011
Industrial Ethernet
Industrial Ethernet Networking
With Totally Integrated Automation, Siemens is the only manufacturer to offer an integrated range of products and systems
for automation in all sectors – from incoming goods and the
production process to outgoing goods, from the field level
through the production control level, to connection with the
corporate management level. SIMATIC NET offers all the components for industrial communication: from industrial communications processors right up to network components –
even wireless if required.
The ever expanding spread of Ethernet in the industrial environment makes it increasingly important to structure the resulting Industrial Ethernet/PROFINET networks.
To achieve maximum uniformity of the networks and seamless integration of the industrial plants, SIMATIC NET offers
different Industrial Ethernet switches − active network components for use direct at the SIMATIC system, as stand-alone
devices, or as plug-in communications processors with integral switch for PCs and SIMATIC.
e
fac
ter
-In
AS
SIMATIC NET
2
Industrial Ethernet
G_IK10_XX_10329
PR
OF
IB
US
l
tria ss
us ce
Ind te Ac
mo
Re
IO-Link
To assist in selecting the right Industrial Ethernet switches,
cables and connectors as well as configuration of modular
variants, the SIMATIC NET Selection Tool is available at:
Online version:
http://www.siemens.com/snst
Offline version:
http://www.siemens.com/snst-download
SIMATIC NET −
Industrial Communication from Siemens
s
les
ire n
l W tio
tria unica
us
Ind omm
C
PROFINET/
Industrial
Ethernet
They are used for the structured networking of machines and
plants as well as for integrating them into the overall corporate network. A graded portfolio of switches (SCALANCE X)
and communications processors with integral switches enables optimum solutions for all types of switching tasks, not
only in harsh industrial environments.
Industrial communication is of central importance
for high-performance automation applications. Its
diversity is mirrored in the broad range of industrial
communication solutions from SIMATIC NET that
extends beyond PROFINET/Industrial Ethernet:
With Industrial Wireless Communication, Industrial
Remote Communication, PROFIBUS, AS-Interface,
and IO-Link, it covers all areas of industrial communication. The optimum solution is guaranteed for every
application and every sector.
© Siemens AG 2011
Communication in industrial environments
Industrial communication differs fundamentally from the communication that is used in the office environment. In the office
environment, many clients communicate with one server; there
are no cross-connections between clients. This type of data
transmission can cause bottlenecks and delays when communication links are being established, when too many clients
access a server simultaneously.
This cannot be used for automation because cyclically executing
process programs require up-to-date input data in order to issue
the appropriate control commands to components.
Furthermore, applications, communications relationships and
network structures must be individually adapted to the harsh
industrial conditions.
An industrial network must also be able to respond flexibly
and at short notice to changing market requirements and retooling must be fast and efficient. It must always be ensured,
however, that the capacity of the network and therefore the
plant or machines is optimally utilized and any downtimes
minimized. All the production and management processes
must perfectly interact.
These requirements can only be satisfied when it is based on an
open, company-wide communication system that permeates
the entire company and extends beyond its boundaries. Island
solutions are avoided in automation and information technology, so the following preconditions must apply:
■
Continuous flow of information from the actuator/
sensor level through to the corporate management level
■
Availability of information at every location
■
Fast exchange of data between the plant sections
■
Easy, plant-wide configuring and efficient diagnostics
■
Integrated security functions that block unauthorized
access
Totally Integrated Automation
The network and automation components of SIMATIC NET are
part of Totally Integrated Automation (TIA), an integrated range
of products and systems for automation in all areas – from incoming goods, through the production process to outgoing
goods, and from the field level, through to the connection to
the corporate management level. These components feature
the highest possible degree of integration because they access a common database which, in turn, saves data entry costs
and ensures consistency throughout the project.
Availability and performance
The demand for high network availability for powerful networks in the various automation applications is rising continuously. Different topologies such as line, ring or star offer
wide-ranging possibilities, e.g. when implementing a production line or manufacturing cell.
Industrial Ethernet is a high-performance area and cell
network designed to the IEEE 802.3 (Ethernet) standard that
can be used to set up powerful communication networks extending over long distances. PROFINET, the open Industrial
Ethernet Standard, uses Industrial Ethernet and facilitates realtime communication right down to the field level. If existing IT
standards are fully utilized, PROFINET even permits isochronous
motion control applications to be implemented via Industrial
Ethernet.
Industrial Ethernet
3
© Siemens AG 2011
Industrial Ethernet
Network performance and technologies
When combined, the current Industrial Ethernet technologies
can significantly boost performance on the network in comparison with the original 10 Mbit/s technology.
These technologies are:
• Fast Ethernet at 100 Mbit/s:
Message frames are transported much faster than by
Ethernet (10 Mbit/s) and therefore only occupy the bus for
an extremely short time. For Fast Ethernet, a 4-wire FastConnect cabling system (Cat5e) is available with cable,
plug and outlet.
• Gigabit Ethernet at 1 Gbit/s:
Gigabit Ethernet is faster than Fast Ethernet by a factor of
10, so the bus is occupied for only one tenth of the time.
For Gigabit Ethernet, an 8-wire FastConnect cabling system
(Cat6) is available with cable, plug and outlet.
• Gigabit Ethernet with 10 Gbit/s:
Compared to Ethernet with 1 Gbit/s, Ethernet with
10 Gbit/s is faster by a factor of 10.
• Full Duplex avoids collisions:
data throughput is increased hugely since the usual message
frame repetitions are avoided. Data can be sent and received simultaneously between two nodes. The data
throughput for a full duplex connection therefore rises to
200 Mbit/s with Fast Ethernet and to 2 Gbit/s with Gigabit
Ethernet.
With full duplex, greater network expansion is also possible.
This means, for example, that when glass fiber-optic cables
are used, distances of 120 km and more can be achieved
between two nodes.
4
Industrial Ethernet
• Switching permits parallel communication:
When a network is subdivided into several segments using
a switch, this results in load separation. Data communication is possible in each individual segment independently
of the other segments. In the overall network, several message frames can therefore be en-route simultaneously. The
performance gain is due to the simultaneity of several message frames.
• Autocrossover automatically crosses the send and receive
cables on twisted-pair interfaces.
• Autosensing describes the characteristic of network nodes
(data terminals and network components) that automatically detect the transmission rate of a signal (10 Mbit/s,
100 Mbit/s, or 1 Gbit/s) and support autonegotiation.
• Autonegotiation is a configuration protocol.
Before initiating the actual data transmission, network devices automatically negotiate a transmission mode that all
devices can use (10/100/1000 Mbit/s, full duplex or half duplex).
© Siemens AG 2011
Advantages of the switching technology
Industrial Ethernet Switches are active network components
that support the different network topologies:
Networks can be constructed with switches in electrical or optical line, star and ring topologies. These active network components specifically distribute data to the relevant addressees.
Switched LAN
SIMATIC NET offers the right Industrial Ethernet switch or a
component with switch functionality for every application:
The switching technology permits parallel communication,
i.e. a network is divided into several segments, thereby resulting in load separation. Data communication is therefore possible in each individual segment independently of the other segments. This means that, throughout the network, multiple
message frames can be in transit at the same time. The performance gain is due to the simultaneity of several message
frames.
• Compact Switch Modules (CSMs) offer additional ports
directly on the SIMATIC.
• Unmanaged and managed switches of the SCALANCE X
product group, perfectly tuned to the respective automation and networking task for integration in PROFINET.
• Communications processors (CPs) for SIMATIC and the PC
that support the CPU in communication tasks, and handle
the switching of smaller network segments in addition to
their actual task.
Segment A
Segment B
Segment A
Segment B
Segment C
Segment D
Segment C
Segment D
Shared LAN
Data traffic
The switching technology offers definite advantages over
shared LAN
• Switches can be used to construct subnets and network
segments
• Data throughput and network performance are increased
by structuring data communication.
• The rules for network configuration are simple
• Network topologies with 50 switches in a ring and an overall
extension of up to 150 km can be implemented without the
need to take signal propagation times into account.
• Unlimited expansion of the network by connecting individual collision domains/subnets (beyond 150 km, the signal
propagation times must be taken into account)
• Easy, reaction-free extension of existing networks is
possible
• All nodes in the network share
the network performance/
data rate.
• All data packets pass through all
segments.
• Only one message in the network
at a time.
Data traffic
G_IK10_XX_10002
Switched LAN
• Each individual segment features
the full performance/
data rate
• Simultaneous data traffic in
several segments, several
message frames at the same
time
• Filtering: Local data traffic
remains local; only selected data
packets exceed segment
boundaries
Electrical or optical cabling systems are used as the transmission medium between the switches. Data terminals are connected electrically over twisted-pair cables.
Industrial Ethernet
5
© Siemens AG 2011
Industrial Ethernet
Reliable networks thanks to redundancy
Fast redundancy
Extremely fast reconfiguration of the network in a ring following an error is indispensable for industrial applications, because the connected data terminals will otherwise disconnect
logical communication links. This would result in a process
running out of control or emergency shutdown of the plant.
In order to achieve the very fast reaction times required, various
standardized procedures are used. The reconfiguration time in
the network plays a crucial role here in avoiding breaks in connection and the associated plant standstills.
In the event of a fault (cable break or failure of a switch), the
communication path is switched over bumplessly (e.g. PRP,
MRPD) or with switchover times of a few milliseconds (e.g.
MRP, max. 200 ms) depending on the redundancy procedure
used. The connected data terminals remain unaffected by the
changes in the network, and no logical connections are cleared
down. Control over the process or application is assured at all
times.
In addition to implementing high-speed media redundancy in
the ring, SIMATIC NET switches also offer the functions required for high-speed redundant coupling of rings or network
segments. Network segments in rings or any other topology
can be coupled over two switches. (Standby redundancy)
S7-400
PC
Operator Station
S7-400
S7-300
SCALANCE
X-400
PC
S7-400
SCALANCE
X310
SCALANCE
X310
S7-300
S7-300 with
CP 343-1
SCALANCE X208
S7-400 with
CP 443-1
S7-400
Industrial Ethernet (Twisted Pair)
Configuration with high-speed redundancy in the electrical ring
6
Industrial Ethernet
S7-400
G_IK10_XX_10101
S7-300
© Siemens AG 2011
Media Redundancy Protocol (MRP)
Higher plant availability can be achieved by means of a redundant installation (ring topology).
The media redundancy can be created on the one hand by
means of switches, and on the other hand direct via the
PROFINET interfaces on SIMATIC controllers and distributed
inputs/outputs.
Thanks to the MRP protocol (IEC 61158 Type 10), reconfiguration times of less than 200 ms can be achieved, depending on
the number of stations.
Glass fiber-optic cables are used to establish optical network
topologies covering long distances, while for shorter distances, plastic fiber-optic cable made of light-conducting plastics
like polymer optical fiber (POF), or plastic covered glass fibers
such as polymer cladded fiber (PCF), are used. Simple fiber-optic cabling for machine-level use is implemented with the
SC RJ connection system for POF and PCF.
The SC RJ connectors can be assembled particularly quickly
and easily on-site. The plastic fiber-optic cables designed for
this purpose can be used universally or specifically in festoon
cable systems.
If the ring is interrupted at one point, immediate reconfiguration takes place and all communication nodes continue to be
accessible.
For optical PROFINET networking, products with POF or PCF
connection are used, e.g. the Industrial Ethernet Switch
SCALANCE X200-4P IRT, ET 200S distributed I/O or the
SCALANCE X101-1POF media converter.
Redundancy with the standard Spanning Tree algorithm
Network separation between corporate levels
The Spanning Tree algorithm is described in the IEEE 802.1d
standard; it organizes any number of meshed Ethernet structures comprising bridges and switches.
The subdivision of the overall corporate network into different
network levels is referred to as network separation. Reasons
for network separation are deliberate load decoupling or different responsibilities within an enterprise (e.g. office and
production network).
The organization of network structures with the Spanning
Tree protocol can take from 30 to 60 seconds. During this period, productive communication for reliable visualization or
process control in the network is not possible.
In the time-optimized variant "Rapid Spanning Tree" according
to IEEE 802.1, the time is shortened to a few seconds for up to
10 series-connected switches. For connecting to office networks, some SCALANCE X switches, e.g. SCALANCE X-300,
support the Rapid Spanning Tree Protocol.
To nevertheless enable company-wide communication, either
SCALANCE X-400/SCALANCE X-500 with layer 3 functionality
or CP 343-1 Advanced or CP 443-1 Advanced communications
processors with IP routing functionality can be used at the interfaces between the individual levels. A configurable IP access list ensures additional network security at the transition
points between the network levels.
6,0$7,&6
ZLWK&3
$GYDQFHG
)LHOG3*
1HWZRUNVHSDUDWLRQ
SCALANCE
X208
Optical cabling with POF/PCF or glass fiber-optic cable
Fiber-optic cables are always recommended as an alternative
to copper cables in environments subject to strong electromagnetic interference (EMI), if reliable equipotential bonding cannot be guaranteed, if the system is in the open air, or if EMI is
not desirable.
,QGXVWULDO(WKHUQHW
SCALANCE
X208
PC/IPC with
CP 1616 as
IO Device
352),1(7,QGXVWULDO(WKHUQHW
LI,57LVUHTXLUHGVZLWFKHVZLWK
,57IXQFWLRQDOLWLHV
HJ6&$/$1&(;,57
PXVWEHXVHG
(76
(76
*B,.B;;B
To prevent data packages circulating in the network, in the
case of closed meshes different connections are switched to
standby so that an open tree structure results from the
meshed structure.
The switches communicate for this purpose using the Spanning
Tree protocol. This protocol is extremely complex because it
has to handle any type of network structure.
CP 443-1 Advanced – connection to higher-level network
Industrial Ethernet
7
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
Overview
Industrial Ethernet switching components comprise:
• Compact Switch Modules (CSMs)
• SCALANCE X Industrial Ethernet switches
• Communications processors (CP) with integral switch
Compact Switch Modules (CSMs)
Unmanaged switches for use directly on the SIMATIC or LOGO!
for interface expansion and integration of machines into existing plant networks.
SCALANCE X-000/XB-000 unmanaged
Unmanaged switches with electrical and optical ports for establishing small networks for machine and process cells with
10/100/1000 Mbit/s.
SCALANCE X-100 unmanaged
Switches with electrical and/or optical ports, redundant power
supply, and signaling contact for use in machine-level applications (also available as media converters with two ports for
converting between different media).
SCALANCE X-200 managed
Universally applicable, from machine-level applications to networked plant sections. Configuration and remote diagnostics
are integrated in the STEP 7 engineering tool. This increases
the level of plant availability. Devices with a high degree of
protection permit a cabinet-free construction.
Appropriate switches (SCALANCE X-200IRT) are also available
for use in subsystem networks requiring strict real-time and maximum availability.
SCALANCE XF-200 managed
SCALANCE XF-200 Industrial Ethernet switches have the same
functions as SCALANCE X-200 switches. Their type of construction in the slim design of the ET 200S distributed I/O
(degree of protection IP20) makes them ideal for space-saving
use in small control boxes.
SCALANCE X-300 managed
Networking of subsystems/plant areas, as well as interfacing
to the enterprise network. The SCALANCE X-300 managed
product line combines the firmware functionality of the
SCALANCE X-400 line with the compact design of the
SCALANCE X-200 line. As a result, SCALANCE X-300 switches
feature expanded management functions and enhanced firmware functionality compared to SCALANCE X-200 switches.
Electrical and optical Gigabit Ethernet ports are also available.
8
SCALANCE X Industrial Ethernet switches
SCALANCE XR-300 managed
The SCALANCE XR-300 Industrial Ethernet switches correspond functionally to the SCALANCE X-300 switches. As rack
switches, they are especially suited for use in 19" control cabinets. They are also fully modular, and due to their 2-port media modules (electrical and optical) they can be adapted to the
respective task.
For use in power plants and under difficult environmental
conditions, ECC (Enhanced Environmental Conditions) versions may be used in compact and rack designs.
SCALANCE X-400 managed (layer 3)
For use in high-performance plant networks (e.g. with highspeed redundancy). Due to the modular structure, the switches
can be adapted to the task in question. Due to the support of IT
standards (e.g. VLAN, IGMP, RSTP), seamless integration of automation networks into existing office networks is possible.
Routing functions on layer 3 permit communication between different IP subnets.
SCALANCE X-500 managed (layer 3)
For networking and structuring high-performance industrial
networks and for connecting office networks to automation
networks. As a layer 3 switch, SCALANCE X-500 can be used
as a central component in backbone networks, e.g. when a
high number of slots is required, at extremely high transmission rates (10 Gigabit Ethernet), or for redundant connection
to an office infrastructure.
The rack switch (19" design) can be used flexibly to suit requirements thanks to its modular design and the plug-in 4port media modules (electrical and optical). Routing functions
on layer 3 permit communication between different IP subnetworks.
Communications processors for SIMATIC with integral
switch
Managed switches for adding Industrial Ethernet/PROFINET
interfaces to the SIMATIC and for integrating the controllers
into existing line or ring topologies. Thanks to integral Layer 3
functionality, the Advanced-CPs can also be used as routers
between IP subnets.
Communications processors for PCs with integral switch
Managed switches for adding Industrial Ethernet/PROFINET
interfaces to industrial PCs and for integrating PCs into existing line topologies.
© Siemens AG 2011
CSM (Compact
Switch Module)
Integrated switch function
(communications processors)
T
OF
PR
INE
X-500 1)
managed
Operations Level
Network components (SCALANCE X)
CP 343-1
Advanced
X-500
CP 443-1
Advanced
T
OF
X-400 1)
managed
INE
CP 1623/
CP 1628
X-400
T
INE
OF
PR
X-300 1)
managed
Control Level
PR
X-300
X-300EEC
XR-300/XR-300EEC
T
INE
OF
X-200 1)
managed
PR
XF-200
X-200
X-200PRO
XF204IRT
X-200IRT PRO
CP 443-1
CP 343-1
CP 343-1 Lean
CP 343-1 BACnet
T
INE
OF
X-200IRT 1)
managed
X-200IRT
T
INE
OF
PR
X-100
unmanaged
Field Level
PR
X-100
X-100 Media converter
X005
XB-000/XB-000G
LOGO!
CSM
CSM
CSM 377
1277
CP 1616
CP 1604
X-000
unmanaged
G_IK10_XX_10237
T
INE
OF
PR
1) additionally supports PROFINET diagnostics
Overview of SCALANCE X Industrial Ethernet switches and components with switch functionality
SCALANCE X Industrial Ethernet switches
9
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
Overview
• Basis for integrated networking in industrial
automation - from the field to the management
level
• Network components optimized for various
applications:
- Small and large-scale networks
- Management functions for network
structuring
- Connection to IT networks
- Configuring of redundant networks
- Use with PROFINET and Industrial Ethernet
• Robust housing for harsh environments
• Graded diagnostics concept
• Configuration of small networks
• Easy expansion of the number of ports for:
- Connection of local HMI systems
Connection to higher-level networks
Service/maintenance
• Communications processor for interfacing with
PROFINET/Industrial Ethernet including
integral switch for:
- For interfacing with distributed I/O.
- Connection to higher-level networks
- IP routing
- Service/maintenance
• Space-saving design of SIMATIC
• Unmanaged Switch with local diagnostics
• SIMATIC or PC module design
• Functions for network diagnostics
Criteria for selecting Industrial Ethernet switching components
10
Integral switch function
SCALANCE X Industrial Ethernet switches
G_IK10_XX_10238
CSM
Network component
X-000
Networks with low emphasis on functionality and
robustness
CSM
Very small networks or interface expansion
for SIMATIC S7
●
CPs
Very small networks through integrated switch
in CP
●
●
X-400
High-performance plant network with high
emphasis on functionality and availability
●
●
●
X-300
X-300EEC/
XR-300EEC
●
●
PC-based applications
●
●
Network setup using
SIMATIC S7
Networks with low emphasis on functionality
●
Internal machine
networking
Plant subnetworking
X-100
High-performance backbone networks with very
high emphasis on functionality / port density /
availability and interface to IT network
Wind energy plants
●
X-500
Application areas / type of network /
requirements
Energy generation
and distribution
●
Industry-related
applications
Networks with higher emphasis on functionality
and availability
Plant networking
X-200
Office incorporation
Machine building and
plant engineering
High-volume machine
building
© Siemens AG 2011
●
Large networks with high emphasis on functionality and availability
●
●
●
●
● applies
●
●
●
X-300EEC/
XR-300EEC
X-200
●
●
●
●
●
●
●
●
●
●
●
●
●
●2)
●
●
●
●
●
●
●
Time synchronization
according to
IEEE 1588
●
PROFINET IO Device
●
Diagnosis
●
Office features (VLAN)
X-300
●
●
Layer 3
●
Isochronous
Real-Time (IRT)
●
●
Can be used under
Enhanced Environmental Conditions
(EEC)
Support of
Gigabit Ethernet
●
X-400
Features
Power-over-Ethernet
19“ design
X-500
Additional interface for
SIMATIC S7
Modular through
media modules
SCALANCE X Industrial Ethernet switches: Areas of application
●
●
X-100
●1)
X-000
●
CSM
●
CPs
● applies
1) with Gigabit version
●
2) with IRT version
SCALANCE X Industrial Ethernet switches: Function overview
SCALANCE X Industrial Ethernet switches
11
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
Compact Switch Modules LOGO! CSM, CSM 1277 and CSM 377
The Compact Switch Modules LOGO! CSM, CSM 1277 and
CSM 377 are unmanaged switches for simple and rapid connection of a LOGO!, SIMATIC S7-1200, S7-300, or ET 200M to
an electrical Industrial Ethernet network. The low-cost switches are thus suitable for the integration of small machines into
existing automation networks, for stand-alone operation of
machines, or to set up small, local Ethernet networks.
Properties at a glance
LOGO! CSM unmanaged
■
Multiplication of the Ethernet interfaces of a LOGO!
logic module. One port is on the front for easy
diagnostics access
■
Two versions for the voltage ranges 12/24 V DC or
230 V AC/DC
■
Low-cost solution for implementing small, local
Ethernet networks
Industrial Ethernet
SIMATIC S7-1200
with CSM 1277
SIMATIC S7-1200
with CSM 1277
G_IK10_XX_10271
SIMATIC S7-1200
with CSM 1277
Field PG
Connection of SIMATIC S7-1200 with CSM 1277 to Industrial Ethernet
with line topology
CSM 1277 unmanaged
■
Saving on installation costs and installation space
compared to the use of an external network component
■
Multiplication of the Ethernet interfaces on a SIMATIC
S7-1200 for additional connection of programming
devices, operator controls, and other Ethernet nodes
■
Lowest-cost solution for implementing small, local
Ethernet networks with a SIMATIC S7-1200
3&ZLWK67(3
6ZLWK
&60DQG
&3
6
ZLWK&3
(7SUR
352),1(7
,QGXVWULDO(WKHUQHW
(76
*B,.B;;B
(7SUR
CSM 377 unmanaged
Connection of SIMATIC S7-300 with CSM 377 to Industrial Ethernet with
linear structure
12
SCALANCE X Industrial Ethernet switches
■
Integration into SIMATIC S7-300 and ET200 M for
implementing small, local Ethernet networks
■
Diagnostics on the device by means of LEDs
(power, link status, data communication)
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
© Siemens AG 2011
SCALANCE X-000 unmanaged
The Industrial Ethernet switch SCALANCE X005 is an unmanaged switch with five RJ45 ports, 10/100 Mbit/s. The product
is a low-cost solution for establishing small star or line topologies with switching functionality in machines islands or process
cells. SCALANCE X005 has a rugged metal housing (IP30) for
space-saving installation in the control cabinet, on standard
rails or S7-300 rails, or for direct wall mounting.
Properties at a glance
■
Diagnostics on the device by means of LEDs
(power, link status, data communication)
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Use in railway and traffic applications
The following versions are available:
• SCALANCE X005 with five electrical ports (RJ45)
• SCALANCE X005TS (Transportation Systems) with five
electrical ports (RJ45);
suitable for use in railroad and traffic applications
with extended temperature range in accordance with
EN 50155 and e1/E1
3&ZLWK
&3$
&3
6&$/$1&(
;
6
6
&3
,3&ZLWK
&3$
&3
3DQHO3&
*B,.B;;B
&3
Star topology with SCALANCE X005
SCALANCE X Industrial Ethernet switches
13
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE XB-000 unmanaged
The SCALANCE XB-000 Industrial Ethernet switches are compact, unmanaged switches with up to eight ports that enable
low-cost establishment of Industrial Ethernet line and star topologies. They have a rugged plastic enclosure (IP20) and save
space when installed on standard mounting rails in the control cabinet or control box. The SCALANCE XB-000 switches
are available in electrical and electrical/optical versions:
• SCALANCE XB005 with five electrical ports
• SCALANCE XB008 with eight electrical ports
• SCALANCE XB004-1/XB004-1LD with four electrical and
one optical port (SC)
Properties at a glance
■
Diagnostics on the device by means of LEDs
(power, link status, data communication)
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
For Gigabit cabling (10/100/1000 Mbit/s), the following
versions are available:
• SCALANCE XB005G with five electrical ports
• SCALANCE XB008G with eight electrical ports
• SCALANCE XB004-1G/XB004-1LDG with four electrical
ports and one multimode glass FOC port (SC)
SCALANCE
X308-2
PC with
CP 1623
SCALANCE
XB005G
Operator control
and process
monitoring
1000 Mbit/s
Image
scanner
SCALANCE
XB005
Field devices
Industrial Ethernet (Twisted Pair)
Star topology with SCALANCE XB005
14
IP camera
Conveyor belt
SCALANCE X Industrial Ethernet switches
*B,.B;;B
PLC
1000 Mbit/s
Industrial Ethernet (Twisted Pair)
Industrial Ethernet (Fiber Optic)
Electrical and optical subnet with SCALANCE XB005G
and SCALANCE X308-2
G_IK10_XX_10259
PC
1000 Mbit/s
© Siemens AG 2011
SCALANCE X-100 unmanaged
IPC with
CP 1613 A2/
CP 1623
S7-400 with
CP 443-1 Advanced
MP 377
S7-300 with
CP 343-1
SCALANCE
W786-1PRO
S7-400 with
CP 443-1 Advanced
S7-300/
MP 377 with
CP 343-1
Switching cabinet
S7-200 with CP 243-1
S7-300 with CP 343-1
SCALANCE
X108PoE
SCALANCE
X112-2
SCALANCE
X104-2
SCALANCE
X106-1
PROFINET
10/100 Mbit/s
Industrial Ethernet FC Cable 2x2
Power over Ethernet
G_IK10_XX_10261
Industrial
Ethernet
Industrial Ethernet (Twisted Pair)
Industrial Ethernet (Fiber Optic)
Electrical and optical line topology with SCALANCE X-100 and Power-over-Ethernet
The unmanaged switches of the SCALANCE X-100 product
range with up to 24 ports are very suitable for setting up line
and star structures (10/100 Mbit/s) and perfect for the on-site
diagnosis in machine-level applications.
They are suitable for industry and save room in the control
cabinet with their compact housing.
The SCALANCE X-100 switches are available in electrical and
electrical/optical versions:
•
•
•
•
SCALANCE X108/X108PoE with eight electrical ports
SCALANCE X116 with 16 electrical ports
SCALANCE X124 with 24 electrical ports
SCALANCE X104-2 with four electrical and two
optical ports (BFOC)
• SCALANCE X106-1 with six electrical and one
optical port (BFOC)
• SCALANCE X112-2 with twelve electrical and two
optical ports (BFOC)
Properties at a glance
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
Redundant power supply
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Power supply of up to two Power-over-Ethernetenabled terminals via four-core data line
(SCALANCE X108PoE only)
SCALANCE X Industrial Ethernet switches
15
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-100 media converter
Media converter for converting electrical signals to optical signals and for connecting existing networks, e.g. AUI networks.
The SCALANCE X101-1POF media converter is ideally suitable
for integrating devices with POF interfaces into existing network structures.
The unmanaged Industrial Ethernet media converters of the
SCALANCE X-100 product line are ideally suited to the conversion of different transmission media in Industrial Ethernet networks at 10/100 Mbit/s in line, star and ring topologies. They
are suitable for industry and save room in the control cabinet
with their compact housing.
Die SCALANCE X-100 media converters are available in the following versions depending on whether ports are electrical or
optical, and they are used to connect existing 10 Mbit/s fiberoptic networks or existing 10Base5 networks (e.g. SINEC H1):
• SCALANCE X101-1 with one electrical 10/100 Mbit/s RJ45
port and one 100 Mbit/s multimode interface
(BFOC connection system)
• SCALANCE X101-1LD with one electrical 10/100 Mbit/s
RJ45 port and one 100 Mbit/s singlemode interface
(BFOC connection system)
• SCALANCE X101-1POF with one 100 Mbit/s plastic optical
fiber (POF) interface (SC RJ connection system)
• SCALANCE X101-1AUI with one 10 Mbit/s AUI interface
(SUB-D connection system)
• SCALANCE X101-1FL with one 10 Mbit/s multimode
interface (BFOC connection system)
Properties at a glance
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
RJ45 sockets with a sleeve for additional strain relief,
designed for PROFINET-compliant IE FC RJ45 plug
■
Redundant power supply
1
SCALANCE X101-1LD
1
SCALANCE X101-1POF
1
SCALANCE X101-1AUI
1
SCALANCE X101-1FL
1
Multimode
BFOC
1
1
1
Function overview of Industrial Ethernet media converters
16
AUI
SCALANCE X Industrial Ethernet switches
1
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Ring redundancy
without RM
Multimode Singlemode
BFOC
BFOC
•
•
•
•
•
G_IK10_XX_10137
SCALANCE X101-1
POF / PCF
10 Mbit/s
On-site display
(SET button)
RJ45
100 Mbit/s
Signaling contact
10 / 100 Mbit/s
2 x 24 V DC
Fast Ethernet
SIMATIC environment
Fiber Optic
LED diagnostics
Twisted Pair
Characteristics
Compact enclosure
Type and number of ports
© Siemens AG 2011
SCALANCE X-200 managed
6
2SHUDWRU6WDWLRQ
6
6
3&
6&$/$1&(
;
6&$/$1&(
;
6
6&$/$1&(
;
6
,3&
6&$/$1&(;
3&
6
,3&
,QGXVWULDO(WKHUQHW7ZLVWHG3DLU
,QGXVWULDO(WKHUQHW)LEHU2SWLF
6
*B,.B;;B
6
6
High speed redundancy in the ring with electrical and optical paths
The managed switches of the SCALANCE X-200 product range
are very well suited for the setup of line, star, and ring structures (10/100 Mbit/s).
Redundant ring topologies can be established via the
SCALANCE X-200 switches.
On the failure of a transmission link or a SCALANCE X-200
switch in the ring, the transmission path is reconfigured
within 200 ms.
With the C-PLUG swap medium, devices can be exchanged
without a programming device; the configuration or application data are secured on the C-PLUG and can be implemented
in another SCALANCE X-200 switch without special knowhow.
Based on PROFINET, the switches of the SCALANCE X-200
product line can be easily integrated into the process and
system diagnostics.
The SCALANCE X-200 switches are available in electrical and
electrical/optical versions:
• SCALANCE X208 with eight electrical ports
• SCALANCE X204-2/X204-2LD with four electrical and two
optical ports (BFOC)
• SCALANCE X206-1/X206-1LD with six electrical and one
optical port (BFOC)
• SCALANCE X212-2/X212-2LD with 12 electrical and two
optical ports (BFOC)
• SCALANCE X216 with 16 electrical ports
• SCALANCE X224 with 24 electrical ports
SCALANCE X Industrial Ethernet switches
17
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-200 managed/SCALANCE XF-200 managed
SCALANCE X-200PRO managed
SCALANCE XF-200 managed
The SCALANCE XF-200 switches have an extra-flat design. These
industry-standard units with IP20 degree of protection and special port arrangement with angled cable outlet allows easy installation of the switches in the control cabinet or control box. In addition, they offer an integrated redundancy manager function,
which allows the network to be reestablished within milliseconds
following an error.
The SCALANCE XF-200 switches are available in electrical and
electrical/optical versions:
• SCALANCE XF204 with four electrical ports
• SCALANCE XF208 with eight electrical ports
• SCALANCE XF204-2 with four electrical and two
optical ports (BFOC)
• SCALANCE XF206-1 with six electrical ports and one
optical port (BFOC)
Thanks to its rugged design, the SCALANCE X-200PRO
Industrial Ethernet switch with IP65 degree of protection allows the setup of a star network topology outside the control
cabinet. If needed, the network can be powered by 24 V DC,
or with 230 V AC using the PS791-1PRO power supply.
• SCALANCE X208PRO with eight electrical ports
ET 200pro
S7-300 with CP 343-1
ET 200pro
Heavy gauge threaded joint
Operator control and monitoring
Field PG
ET 200S
IPC with
CP 1616
SCALANCE
X208PRO
Power Supply
PS791-1PRO
Access Point
SCALANCE
W788-1PRO
230 V AC
Power Supply
PS791-1PRO
PROFINET
230 V AC
Industrial Ethernet
Configuration for cabinet-free setup with SCALANCE X208PRO with IP65 degree of protection
18
SCALANCE X Industrial Ethernet switches
24 V DC
Mobile Panel
277 IWLAN
G_IK10_XX_10078
24 V DC
© Siemens AG 2011
SCALANCE X-200IRT managed/SCALANCE XF-200IRT managed
SCALANCE X-200IRT managed
Control cabinet
PROFINET
SCALANCE
XF204IRT
ET 200S
SIMATIC Microbox with
CP 1604 as PN IO-Controller
Industrial
Ethernet
PC with CP 1616
as PN IO controller
PROFINET
Industrial Ethernet
Field PG
SCALANCE
X204IRT
SCALANCE
X204IRT
Control cabinet
ET 200S
ET 200S
TP 177B
G_IK10_XX_10256
IPC with CP 1616
as PN IO device
ET 200S
G_IK10_XX_10100
SCALANCE
XF204IRT
Configuration example for SCALANCE X204IRT
Use of SCALANCE XF-200/XF-200IRT in slim control boxes
With the versions SCALANCE X-200IRT, real time and isochronous real time networks can be set up. As a result, one network is available for hard real-time and standard data transmission (TCP/IP), preventing the need for a double infrastructure.
SCALANCE XF-200IRT managed
Redundant ring structures can be set up and two sub-networks, e.g. rings, can be connected redundantly via the
SCALANCE X-200IRT switches (standby function).
On the failure of a transmission link or a SCALANCE X-200
switch in the ring, the transmission path is reconfigured
within 200 ms.
The SCALANCE X-200IRT switches are available as electrical
and electrical/optical versions with degrees of protection IP30
and IP65:
• SCALANCE X204IRT/X204IRT PRO
with four electrical ports
• SCALANCE X201-3P IRT/X201-3P IRT PRO
with one electrical port and three optical ports (POF/PCF)
• SCALANCE X200-4P IRT with four optical ports (POF/PCF)
• SCALANCE X202-2IRT/X202-2P IRT/X202-2P IRT PRO
with two electrical and two optical ports (BFOC or POF/PCF)
Thanks to the advantages of its slim design, the SCALANCE
XF-204IRT switch allows the setup of real-time and isochronous real-time networks. As a result, one network is available
for hard real-time and standard data transmission (TCP/IP),
preventing the need for a double infrastructure.
Redundant ring structures can be set up and two subnets,
e.g. rings, can be connected redundantly (standby function).
Fast Start-Up
In modern manufacturing applications, the installed robots
use different tools depending on the task. For this, a fast
power-up of the components on the robot tools is necessary.
The power-up behavior (link building, data forwarding) of
PROFINET network components and I/O devices has been optimized with the new Fast Start-Up (FSU) functionality. Depending on the peripheral devices used, the start-up can occur within 500 ms after power is applied and the components
are included in the data exchange.
The demand for very short cycle times in production is met not
only by PROFINET IO controllers and I/O devices, but also by
SCALANCE X switches with integrated ERTEC and IRT functionality.
SCALANCE X Industrial Ethernet switches
19
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-200 managed/SCALANCE XF-200 managed
2SHUDWRU6WDWLRQ
2SHUDWRU6WDWLRQV
6
6&$/$1&(
;,57
6&$/$1&(
;
,QGXVWULDO(WKHUQHW
0ELWV
)LEHURSWLFFDEOH
6&$/$1&(;
6
6&$/$1&(;,57
DVVWDQGE\PDVWHU
6
6&$/$1&(;,57
DVVWDQGE\VODYH
0ELWV
6
6&$/$1&(
;
6&$/$1&(
;,57
6
Redundant coupling of two subnets with SCALANCE X-200IRT
Properties at a glance
■
■
20
Fast Start-Up for optimized start-up behavior
(link building, data forwarding) of PROFINET network
components and I/O devices
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
Redundant power supply
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
SCALANCE X Industrial Ethernet switches
■
Integrated redundancy manager for constructing
Fast Ethernet ring topologies with high-speed media
redundancy.
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Remote diagnosis is performed by means of SNMP,
web browser and PROFINET IO diagnostics
■
Integrated configuration and diagnostics in STEP 7
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function
■
C-PLUG swap medium for rapid replacement of devices
*B,.B;;B
,3&
© Siemens AG 2011
SCALANCE X-300 managed
PC
PC
SCALANCE X414-3E
SCALANCE X414-3E
Control cabinet
Control cabinet
SCALANCE
X308-2
Control cabinet
SCALANCE
X308-2
S7-400
S7-300
S7-400
S7-400
ET 200S
ET 200S
PC
ET 200S
G_IK10_XX_10215
S7-400
S7-400
SCALANCE
XR324-12M
PROFINET/Industrial Ethernet (Twisted Pair)
PROFINET/Industrial Ethernet (Fiber Optic)
Integration of control cabinets with SCALANCE X-300 in an optical Gigabit ring
The compact Gigabit switches of the SCALANCE X-300 product
range are Industrial Ethernet switches for setting up line, star,
and ring topologies (10/100/1000 Mbit/s) for high-performance networks. They enable the construction of optical
and/or electrical networks with high network availability,
since, for example, they enable ring redundancy in combination with a redundancy manager function and have a redundant power supply.
With the C-PLUG swap medium, devices can be exchanged
without programming device; the configuration or application data are secured on the C-PLUG and can be implemented
in another SCALANCE X-300 switch without special expertise.
The gigabit ports are typically used for connecting the switches to each other and for a possible connection to higher network levels.
The following network topologies and combinations of topologies are possible:
• Fast Ethernet and Gigabit Ethernet rings with fast media redundancy. To protect against failure of a transmission link
or a switch, as many as 50 SCALANCE X-300 switches cascaded in line can be connected into a ring. On the failure of
a transmission link or a SCALANCE X-300 switch in the ring,
the transmission path is reconfigured within 200 ms.
• Redundant connection of the ring topology to the corporate network using Rapid Spanning Tree Protocol (RSTP)
• Redundant linking of subnets, e.g. ring topologies
(standby redundancy)
• Star topology with SCALANCE X-300 switches:
Each SCALANCE X-300 switch represents a star point which
can interconnect nodes or subnets electrically or optically.
• Problem-free connection of existing twisted-pair data terminals or existing network segments at 10/100/1000 Mbit/s
• High availability of the network thanks to
- Redundant power supply
- Redundant network structures based on fiber-optic or
twisted pair cables
SCALANCE X Industrial Ethernet switches
21
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-300 managed
Switches with Fast Ethernet and Gigabit Ethernet ports
Fast Ethernet switches
SCALANCE X310
• Three Gigabit ports
• Seven Fast Ethernet ports
SCALANCE X310FE
• Ten electrical Fast Ethernet ports
SCALANCE X308-2
• Two optical Gigabit ports (SC multimode, up to 750 m)
• One electrical Gigabit port (RJ45)
• Seven Fast Ethernet ports
SCALANCE X308-2LD
• Two optical Gigabit ports (SC singlemode, up to 10 km)
• One electrical Gigabit port (RJ45)
• Seven Fast Ethernet ports
SCALANCE X308-2LH
• Two optical Gigabit ports (SC singlemode, up to 40 km)
• One electrical Gigabit port (RJ45)
• Seven Fast Ethernet ports
SCALANCE X308-2LH+
• Two optical Gigabit ports (SC singlemode, up to 70 km)
• One electrical Gigabit port (RJ45)
• Seven Fast Ethernet ports
SCALANCE X307-3
• Three optical Gigabit ports (SC multimode, up to 750 m)
• Seven Fast Ethernet ports
SCALANCE X307-3LD
• Three optical Gigabit ports (SC singlemode, up to 10 km)
• Seven Fast Ethernet ports
22
SCALANCE X Industrial Ethernet switches
SCALANCE X306-1LD FE
• Six electrical Fast Ethernet ports
• One optical port (SC, singlemode, up to 26 km)
SCALANCE X320-1FE
• Twenty electrical Fast Ethernet ports
• One optical port (SC, multimode, up to 5 km)
SCALANCE X320-3LD FE
• Twenty electrical Fast Ethernet ports
• Three optical ports (SC, multimode, up to 5 km)
Full Gigabit Ethernet switches
SCALANCE X308-2M
• Four electrical Gigabit ports
• Two free module slots for 4 x 10/100/1000 Mbit/s media
modules (electrical or optical)
SCALANCE X308-2M TS (Transportation Systems)
• Four electrical Gigabit ports
• Two free module slots for 4 x 10/100/1000 Mbit/s media
modules (electrical or optical)
• Suitable for use in railroad applications in accordance with
EN 50155
© Siemens AG 2011
SCALANCE XR-300 managed
The SCALANCE XR-300 is an industry-standard Industrial
Ethernet 19" rack switch with IP20 degree of protection that
features IT functions such as VLAN, IGMP Snooping/Querier, or
STP/RSTP.
The main application areas for the SCALANCE XR-300 switches
are high-performance plant networks with a connection to the
enterprise network, as well as power distribution centers. Thanks
to the compact, space-saving 19" design, the SCALANCE XR-300
can be installed in 19" control cabinets.
SCALANCE XR-300 switches permit the configuration of
switched networks at the field level and control level, which
not only demand high availability of the network and extensive diagnostic options, but also high transmission rates.
SCALANCE XR324-12M (12 media modules)
Optical Industrial Ethernet line, ring or star topologies are
constructed using the SCALANCE XR324-12M switches with
24 ports, of which 12 are media module slots. The switches
can be equipped with electrical and/or optical 2-port media
modules.
Space is also saved in the control cabinet due to the flexible
cable outlet on the front or rear of the device.
LEDs, connections for the power supply and data cable outlet
are installed − depending on the device variant − on the front
or rear.
The power supply is alternatively from
• 1 x 24 V DC power supply unit
• 1 x 110 to 230 V AC power supply unit
The use of media modules supports unlimited flexibility in expansion (e.g. more data terminals) or conversion of the network
(e.g. conversion from copper to fiber-optic conductors).
)RUYHUVLRQVFRQWDLQLQJFDEOHRXWOHWDWWKHUHDU
RQO\WKH/('ILHOGDQG6(/(&76(7EXWWRQVDV
ZHOODVWKHVHULDOFRQVROHSRUW5-DUHDWWKH
IURQW
)URQW
5HDU
&RQQHFWLRQH[DPSOH
,()&5-3OXJ)DVW&RQQHFWFRQQHFWRU
WR00&8&PHGLDPRGXOH
ZLWKUHWDLQLQJFROODU
&RQQHFWLRQH[DPSOH
)&%)2&3OXJ)DVW&RQQHFWFRQQHFWRU
WR00PHGLDPRGXOH
PXOWLPRGH
G_IK10_XX_10283
6ORWIRU
&3/8*
SCALANCE XR-300 with data cable outlet at rear
SCALANCE X Industrial Ethernet switches
23
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-300 managed
SCALANCE X-300PoE / XR-300PoE managed
SCALANCE XR324-4M PoE
19" Industrial Ethernet switches with
The SCALANCE X-300PoE product line for constructing electrical and/or optical line, star and ring topologies operating at
10/100/1000 Mbit/s has the functionality of SCALANCE X-300.
SCALANCE X308-2M PoE
Compact Industrial Ethernet switch with
• Four RJ45 ports incl. Power-over-Ethernet functionality
(according to IEEE 802.3at Type 1, corresponding to
IEEE 802.3af) for the supply of power to data terminals
(up to 15 W each)
• Two slots for any type of 2-port media module
• Eight permanently integrated RJ45 ports incl. Power-overEthernet functionality (according to IEEE 802.3at Type 1,
corresponding to IEEE 802.3af) for the supply of power to
data terminals (up to 15 W each)
• Eight permanently integrated RJ45 ports without Powerover-Ethernet functionality
• Four slots for any type of 2-port media module
The modularity offered by the use of media modules enables
the network to be perfectly adapted to the application. This
means that a network can be easily expanded or converted,
e.g. to Gigabit Ethernet or from multimode to singlemode fiber-optic cables.
The SCALANCE X308-2M PoE and XR-300PoE switches supply
PoE-compatible devices, such as IWLAN access points
SCALANCE W, IP cameras or IP telephones, with energy over
the data cable and are suitable for constructing electrical
and/or optical Industrial Ethernet line, star or ring structures.
Office
IP
Phone
HiPath
Access
Point
PoE
PoE
SCALANCE
X308-2M PoE
Factory
Code
Reader
SCALANCE
XR324-4M PoE
Factory
PoE
Outdoor
SCALANCE
W788
SCALANCE
W786
Scanner
PoE
PoE
SCALANCE
X108PoE
PoE
Scanner
PoE
IP Fixdome
Camera
(CFMC1315)
PROFINET/Industrial Ethernet (Twisted Pair)
PROFINET/Industrial Ethernet (Fiber Optic)
Supply of terminal devices with Power-over-Ethernet by means of PoE-compatible switches
24
SCALANCE X Industrial Ethernet switches
PoE
IP Camera
(CCMS1315)
G_IK10_XX_10286
PoE
© Siemens AG 2011
SCALANCE X-300EEC/XR-300EEC managed
The switches of the product line SCALANCE X-300EEC/XR-300EEC
(Enhanced Environmental Conditions) are managed Industrial
Ethernet switches with degree of protection IP30 or IP20. They
are designed for use in harsh industrial environments as well as in
power switchgear. They permit the communication of switching
and protection devices in low-voltage and high-voltage switchgear. The switches meet all the necessary EMC approvals for this
field of application (IEC standard 61850-3). The devices for increased availability requirements are offered with redundant
wide-range power supplies (for 60 V to 250 V DC / 100 V to
240 V AC). SCALANCE X-300EEC switches with conformal coating can also be used in harsh environments.
SCALANCE X-300EEC/XR-300EEC are available in the following versions:
Operator station
SCALANCE X307-2EEC and SCALANCE X302-7EEC compact
devices
• Seven electrical (RJ45) and two optical (SC) ports
• Seven optical and two electrical ports
Modular 19" rack device SCALANCE XR324-4M EEC
(four media module slots)
• 16 electrical (RJ45) ports
• Eight modular ports which can be equipped with 2-port
media modules.
The SCALANCE XR324-4M EEC is available with front or rear
cable outlet. In the version with rear cable outlet, the cables
are located in the back of the control cabinet and the devices
can be diagnosed by means of LEDs on the front. As a star coupler in the plant bus (redundant connection possible), it is designed specifically for use in power distribution plants.
Operator station
Engineering station
SCALANCE X307-2EEC
SCALANCE X307-2EEC
Master computer for power switchboards
Industrial
Ethernet
SCALANCE
X307-2EEC
SIPROTEC protection devices
SCALANCE
XR324-4MEEC
SIPROTEC protection devices
G_IK10_XX_10278
SCALANCE
XR324-4MEEC
Use of SCALANCE X-300EEC and XR-300EEC in power switchgear
To assist in selecting the right Industrial Ethernet switches,
cables and connectors as well as configuration of modular
variants, the SIMATIC NET Selection Tool is available at:
Online version:
www.siemens.com/snst
Offline version:
www.siemens.com/snst-download
SCALANCE X Industrial Ethernet switches
25
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-300 managed
Properties at a glance
■
Simple adaptation to the structure of a plant thanks
to the modularity offered by 2-port media modules
■
Remote diagnosis is performed by means of SNMP,
web browser and PROFINET IO diagnostics
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
Integrated configuration and diagnostics in STEP 7
■
Integrated redundancy manager for constructing
Fast Ethernet and Gigabit Ethernet ring topologies
with high-speed media redundancy
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function
■
C-PLUG swap medium for rapid replacement of
devices
■
Multicast and broadcast limitation
■
Support of VLAN permits integration into enterprise
security policies
■
IGMP Snooping and IGMP Query support Multicast
filtering and limiting
■
Redundant power supply
■
Reduction of the network installation costs due to
savings in power cables and additional network
components when Power-over-Ethernet is used
■
High flexibility thanks to variable mounting options
of the power supply unit, and choice between front
or rear cable outlet on the device (depending on the
device variant)
■
26
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
SCALANCE X Industrial Ethernet switches
© Siemens AG 2011
Media modules for modular SCALANCE X-300 managed switches
Different 2-port media modules support versatile configuration of the partly and fully modular switches
• SCALANCE X308-2M/X308-2M TS/X308-2M PoE and
• SCALANCE XR-300/XR-300PoE/XR-300EEC
The media modules are available both as electrical versions
with RJ45 ports and as optical versions with BFOC, SC and LC
ports for the use of multimode and singlemode fiber-optic
cables.
MM992-2CUC with RJ45 ports
and retaining sleeve
MM992-2 media module with
SC ports
MM991-2 media module with
BFOC ports
MM992-2SFP media module with
SFP transceiver (LC ports)
Using a 2-port SFP media module (Small Form-Factor
Pluggable) the optional use of fiber optic SFP plug-in transceivers with LC connection technology is possible.
Their versatility (electrical/optical, multimode/singlemode,
Fast Ethernet, Gigabit Ethernet) with media modules which
can be differently equipped allows significantly reduced stocking of device variants.
6)3PHGLDPRGXOHV
WZR6)3VORWVDUH
LQVHUWHGLQWRWKHGHYLFH
(OHFWULFDO
SRUWPHGLDPRGXOHV
DUHLQVHUWHGLQWRWKH
GHYLFH
2SWLFDO
6)3SOXJJDEOHWUDQVFHLYHUV
RQHSRUWDUHLQVHUWHGLQWR
WKH6)3PHGLDPRGXOH
G_IK10_XX_10282
2SWLFDO
SRUWPHGLDPRGXOHV
DUHLQVHUWHGLQWRWKH
GHYLFH
Insertion of 2-port media modules in media module slot
Properties at a glance
■
Flexibility on network expansion or conversion
■
Reductions in stock-keeping costs and upkeep
■
Different variants:
electrical or optical, multimode or singlemode
SCALANCE X Industrial Ethernet switches
27
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-400 managed (layer 3)
The modular switches of the SCALANCE X-400 product range
are Industrial Ethernet switches for setting up line, star, and
ring structures (10/100/1000 Mbit/s) for high-performance
networks.
They allow flexible setup of optical or electrical networks,
which can be adapted in their topology, port number, and port
type to the respective network structures. They allow high
network availability, since, for example, they enable ring redundancy in combination with a redundancy manager function,
have redundant power supply or permit exchange and extension of media modules during operation.
With the C-PLUG swap medium, devices can be exchanged
without programming device; the configuration or application data are secured on the C-PLUG and can be implemented
in another SCALANCE X-400 switch without special knowhow.
• SCALANCE X-400 switches have a modular structure, in
which media modules and/or extender modules can be
connected to the switch as required. Thanks to these expansions, up to eight electrical and eight optical ports are
additionally available.
The gigabit ports are typically used for connecting the
switches to each other and for a possible connection to
higher network levels. Optical connections are available by
means of media modules.
The SCALANCE X-400 switches are well suited, for example, to process control systems such as PCS7.
The following network topologies and combinations of topologies are possible:
• Fast Ethernet and Gigabit Ethernet rings with fast media redundancy. To protect against failure of a transmission link
or a switch, as many as 50 X-400 switches cascaded in line
can be connected into a ring. On the failure of a transmission link or a SCALANCE X-400 switch in the ring, the transmission path is reconfigured within 200 ms.
• Redundant connection of the ring topology to the corporate network using Rapid Spanning Tree Protocol (RSTP).
• Redundant linking of subnets, e.g. ring topologies
(standby redundancy)
• Star topology with SCALANCE X-400 switches:
Each SCALANCE X-400 switch represents a star point which
can interconnect up to 26 nodes or subnets electrically or
optically.
• Problem-free connection of existing twisted-pair data
terminals or existing network segments up to
10/100/1000 Mbit/s
• High availability of the network thanks to
- Redundant power supply
- Redundant network structures based on fiber-optic or
twisted pair cables
- Replacement and extension of media and expansion
modules during operation
- Layer-3 functionality and Virtual Router Redundancy
Protocol (VRRP) enable use as routers between different
IP subnets, also redundantly (only SCALANCE X414-3E)
SCALANCE X-400 modular is available in the following
versions:
• SCALANCE X408-2: choice of four electrical or optical
(SC) gigabit ports and four electrical Fast Ethernet ports
• SCALANCE X414-3: choice of two electrical or optical (SC)
gigabit ports, twelve electrical Fast Ethernet ports and optionally four optical Fast Ethernet ports (BFOC). It can be extended with extender modules with either eight electrical
or eight optical (BFOC) Fast Ethernet ports.
28
SCALANCE X Industrial Ethernet switches
© Siemens AG 2011
26
2SHUDWRU6WDWLRQ26
6,0$7,&,7
6&$/$1&(
;
6,0$7,&%DWFK
26
(QJLQHHULQJ6WDWLRQ(6
6&$/$1&(
;
7HUPLQDOEXV
0ELWV
,3&
6&$/$1&(
;
,QGXVWULDO(WKHUQHW
HOHFWULFDO
,QGXVWULDO(WKHUQHW
RSWLFDO
266HUYHU
UHGXQGDQW
266HUYHU
UHGXQGDQW
0ELWV
6&$/$1&(
;
6&$/$1&(
;
3ODQW%XV
,3&
6&$/$1&(
;(
0ELW,V
6&$/$1&(
;
6&$/$1&(;(
+XPDQPDFKLQH
LQWHUIDFH
6&$/$1&(
;(
(70
352),%86
(70
352),%86
3URGXFWLRQFHOO
*B,.B;;B
6
5HGXQGDQWFRQWURO
6+
Use of the SCALANCE X-400 switches in a process control system, e.g. PCS7
SCALANCE X Industrial Ethernet switches
29
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-400 managed (layer 3)
Properties at a glance
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
Integrated redundancy manager for constructing Fast
Ethernet and Gigabit Ethernet ring topologies with
high-speed media redundancy
■
Redundant power supply
■
Integrated configuration and diagnostics in STEP 7
■
RJ45 sockets with retaining sleeve for additional strain
relief, designed for PROFINET-compliant IE FC RJ45 plug
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Flexible, modular design
■
Automatic e-mail sending function
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
C-PLUG swap medium for rapid replacement of devices
■
Multicast and broadcast limitation
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and autonegotiation function
■
Support of VLAN permits integration into enterprise
security policies
■
IGMP Snooping and IGMP Query support Multicast
filtering and limiting
■
Layer 3 functionality (IP Routing; SCALANCE X414-3E)
■
30
Remote diagnosis is performed by means of SNMP,
web browser and PROFINET IO diagnostics
SCALANCE X Industrial Ethernet switches
© Siemens AG 2011
SCALANCE X-500 managed (layer 3)
SCALANCE X-500 switches are fully modular, high-performance, and industry-standard switches for the construction
of electrical and optical line, ring and star topologies with
transfer rates of up to 10 Gbit/s, designed for installation in
19" control cabinets.
The SCALANCE X-500 switches are ideal for use in industrial
networks and for integrating the industrial network into an existing corporate network. From the control level to the management level, the switch handles the networking of plant
sections as well as distributed field devices and ensures high
plant availability with extensive diagnostics options and high
transmission speeds.
Thanks to the scalability of the basic unit and the optionally
available layer 3 switching function, the network can be established specially for the relevant application.
Additional functions of the switch are activated by means of a
KEY-PLUG.
The SCALANCE X-500 switches are suitable for setting up electrical and optical Industrial Ethernet line, star and ring structures, and they are available with the following port types for
multimode or singlemode connections:
Product versions
SCALANCE XR552-12M
• LEDs and data cable outlet on the front
• Alternatively: LEDs on the front and data cable outlet at the
rear
• Connection of power supply unit at rear or above/below the
switch
• Four SFP+ slots for equipping with 10 Gigabit Ethernet
SFP+ plug-in transceivers or Gigabit SFP plug-in transceivers
• 12x 4-port media module slots
SCALANCE XR528-6M
• LEDs and data cable outlet on the front
• Alternatively: LEDs on the front and data cable outlet at the
rear
• Connection of power supply unit at rear or above/below the
switch
• Four SFP+ slots for equipping with 10 Gigabit Ethernet
SFP+ plug-in transceivers or Gigabit SFP plug-in
transceivers
• 6x 4-port media module slots
• Four SFP+ slots for optical SFP+ or SFP plug-in transceivers
- The SFP+ plug-in transceivers support 10 Gbit/s
- The SFP plug-in transceivers support 1000 Mbit/s
• Up to 12 slots for electrical 4-port media modules, electrical
PoE 4-port media modules and optical 4-port media modules (with different connection methods);
- For industrial applications, the RJ45 sockets are also
available with additional retaining sleeve for connection
of the Industrial Ethernet FC RJ45 Plug 180
- All electrical Ethernet interfaces support
10/100/1000 Mbit/s, all optical Ethernet interfaces
support 100 or 1000 Mbit/s.
The use of media modules or SFP+/SFP enables the following:
• Extension of networks by subsequent insertion of additional media modules in unused media module slots
• Changing of cabling technology, such as conversion from
copper to fiber-optic cables, or from multimode to singlemode FOC
• Changing of the transfer rate, e.g. from 1000 Mbit/s to
10 Gbit/s
SCALANCE X Industrial Ethernet switches
31
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
SCALANCE X-500 managed (layer 3)
Management Level
Server
Server
Server
Server
Server
1000 Mbit/s
10 Gbit/s
SCALANCE
XR-500
Operations Level
1000 Mbit/s
10 Gbit/s
SCALANCE
XR-500
RSTP
Operator Station
SCALANCE
1000 Mbit/s XR-500
PC
SCALANCE
XR-500
PC
Ring redundancy
Operator Station
PC
10 Gbit/s
Industrial Ethernet
Control Level
SCALANCE XR-500
SCALANCE XR-500
1000 Mbit/s
SCALANCE
X-400
SCALANCE
X-400
Engineering Station
SCALANCE
XR-300
SCALANCE XR-300
1000 Mbit/s
SCALANCE
SCALANCE
1000 Mbit/s
X-300
X-300
SCALANCE
X-300
SCALANCE
X-300
Field Level
SCALANCE XR-300
100 Mbit/s
100 Mbit/s
SCALANCE
X-200
SCALANCE
X-200
1000 Mbit/s
S7-400 with
CP 443-1
Advanced
1000 Mbit/s
S7-300 with
CP 343-1
Advanced
100 Mbit/s
SCALANCE
XF-200
S7-300
100 Mbit/s
100 Mbit/s
SCALANCE
X-200
ET 200S
S7-400
ET 200S
S7-300 with
CP 343-1
Lean
ET 200S
Use of SCALANCE XR-500 in redundant network topologies, e.g. with Rapid Spanning Tree Protocol (RSTP) and ring redundancy
32
SCALANCE X Industrial Ethernet switches
ET 200pro
G_IK10_XX_10298
PROFINET
© Siemens AG 2011
Properties at a glance
■
Simple adaptation to the structure of a plant thanks to
the modularity offered by 4-port media modules
■
Diagnostics on the device by means of LEDs (power,
link status, data communication) and signaling contact (signaling mask can be set on site using buttons)
■
■
High availability of the network thanks to
– Redundant power supply
– Integrated redundancy manager for constructing
Fast Ethernet and Gigabit Ethernet ring topologies
with high-speed media redundancy
– Easy device replacement by means of plug-in
C-PLUG/KEY-PLUG swap medium
– Very fast reconfiguration of the network in event of
a fault
KEY-PLUG swap medium for layer 3 functionality
during operation
■
Thanks to support for the Dual Stack Routing function,
both IPv4 and IPv6 addressing can be operated in one
network
■
High flexibility thanks to variable mounting options of
the power supply unit, and choice between front or
rear cable outlet on the device (depending on the
device variant)
■
Reduction of the network installation costs due to savings in power cables and additional network components when Power-over-Ethernet is used
■
RJ45 sockets with retaining sleeve for additional strain
relief, designed for PROFINET-compliant IE FC RJ45
plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data transmission rate by means of autosensing and autonegotiation function
■
Remote diagnosis is performed by means of SNMP, web
browser and PROFINET IO diagnostics
■
Integrated configuration and diagnostics in STEP 7
■
Integration of the switches in existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function
■
Multicast and broadcast limitation
■
Support of VLAN permits integration into enterprise
security policies
■
IGMP Snooping and IGMP Query support Multicast
filtering and limiting
SCALANCE X Industrial Ethernet switches
33
© Siemens AG 2011
SCALANCE X Industrial Ethernet switches
Media modules for modular SCALANCE X-500 managed switches
Different 4-port media modules support versatile configuration of SCALANCE X-500 switches.
Electrical versions with RJ45 ports are available as well as optical versions with BFOC and SC ports for the use of multimode
and singlemode fiber-optic cables.
• Using a 4-port SFP media module, the optional use of
fiber-optic SFP plug-in transceivers (Small Form-Factor
Pluggable) with LC connection technology is possible
• SFP+ and SFP plug-in transceivers for flexible equipping of
the four integral SFP+ slots in SCALANCE X-500
Their versatility (electrical/optical, multimode/singlemode,
Fast Ethernet, Gigabit Ethernet) with media modules which
can be differently equipped allows significantly reduced stocking of device variants.
MM992-4 CuC with RJ45 ports
MM991-4 with BFOC ports
and retaining sleeve
MM992-4 with SC ports
MM991-4 with SFP ports
2SWLFDO6)3
SOXJJDEOHWUDQVFHL
YHUVRQHSRUWDUH
LQVHUWHGLQWR
WKHGHYLFH
6)3PHGLDPRGXOHV
IRXU6)3VORWVDUH
LQVHUWHGLQWRWKHGHYLFH
(OHFWULFDOSRUW
PHGLDPRGXOHVDUH
LQVHUWHGLQWRWKHGHYLFH
4-port media modules plugged into media module slot and SFP/SFP+ plug-in transceivers in SFP+ slots
Properties at a glance
34
■
Unlimited flexibility for network expansions,
conversion, or increasing the performance
■
Reductions in stock-keeping costs and upkeep
SCALANCE X Industrial Ethernet switches
■
Different variants:
electrical or optical, multimode or singlemode
G_IK10_XX_10325
2SWLFDO6)3
SOXJJDEOHWUDQVFHLYHUV
RQHSRUWDUHLQVHUWHG
LQWRWKH6)3PHGLDPRGXOH
2SWLFDO
SRUWPHGLDPRGXOHV
DUHLQVHUWHGLQWRWKH
GHYLFH
© Siemens AG 2011
Industrial Ethernet Switching
Communications processors with switch functionality
Generally, communications processors are used to connect
SIMATIC S7 or PCs to PROFIBUS or Industrial Ethernet. The CPs
perform communication tasks for the controllers and take up
few of their resources. Some communications processors also
have an integral switch, which offers additional benefits.
In this case, suitable protective measures (including IT security
such as network segmentation) should be taken in order to
ensure safe operation of the plant. For more information on
the topic of industrial security, go to
www.siemens.com/industrialsecurity.
(76
6,0$7,&6
ZLWK&3
)LHOG3*
352),1(7
,QGXVWULDO(WKHUQHW
*B,.B;;B
• Establishment of small networks without additional switch
• Connection of machines or process cells to higher-level
networks
• Network separation by means of layer 3 functionality
(IP routing) and Security Integrated (firewall, VPN) with
CP 343-1 Advanced and CP 443-1 Advanced.
• Functions for network diagnostics
3DQHO3&
6,0$7,&6
ZLWK&3
$GYDQFHG
Independent local networks (e.g. within a machine or cell)
Operator Station
,QGXVWULDO(WKHUQHW
6,0$7,&
6
ZLWK&3
$GYDQFHG
PCS 7
PCS 7
)LHOG3*
SCALANCE
S623
1HWZRUNVHSDUDWLRQ
Switch
SCALANCE
X208
Switch
SCALANCE
X208
SCALANCE XR324-12M
Industrial Ethernet
PC/IPC
with
CP 1616
as IO
Device
Connection to higher-level network
(76
(76
*B,.B;;B
SCALANCE
S612
352),1(7,QGXVWULDO(WKHUQHW
LI,57LVUHTXLUHGVZLWFKHV
ZLWK,57IXQFWLRQDOLWLHV
HJ6&$/$1&(;,57
PXVWEHXVHG
SCALANCE
X308-2M
SIMATIC S7-400
with CP 443-1
Advanced
SIMATIC S7-300
with CP 343-1
Advanced
PROFINET/
Industrial Ethernet
Protection of controls by means of CPs with Security Integrated
Industrial Ethernet Switching
35
© Siemens AG 2011
Industrial Ethernet Switching
Communications processors with switch functionality
The SIMATIC NET communications processors can be used for
applications in factory and process automation. With their
protocol pre-processing, they offer constant data throughput,
enable consistently fast response times, and prevent fluctuations in communication performance.
The communication processors are all designed for use in
tough industrial environments with a wide range of temperatures. They are certified for marine use, enabling them to be
used in ships or offshore installations.
The following communications processors are available with
integral swtich:
CPs for SIMATIC S7
CP 343-1 Lean, CP 343-1, CP 343-1 Advanced,
CP 443-1, CP 443-1 Advanced
Properties at a glance
36
CPs for PCs
CP 1604, CP 1616, CP 1623, CP 1628
Properties at a glance
■
Connection to SIMATIC S7 via backplane bus
■
Connection in the PC via PCI, PCIe or PC/104-Plus
interface
■
Diagnostics on the device by means of LEDs
(link status, bus fault, data communication)
■
Redundant voltage supply via PCIe interface and
external power supply 12 to 24 V DC for operating
the switch when the PC is turned off
(CP 1623 and CP 1628 only)
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Remote diagnostics is performed by means of SNMP
and PROFINET IO diagnostics
■
Support of PROFINET IRT for time-critical applications
also with isochronous closed-loop control in the
motion control area (except CP 1623)
■
Integrated configuration and diagnostics in STEP 7
■
Integration of the CPs into existing network management infrastructure by means of SNMP access
■
Support for Gigabit Ethernet (CP 1623 only)
■
Security Integrated (Firewall, VPN) with CP 343-1
Advanced, CP 443-1 Advanced, and CP 1628
■
RJ45 sockets with retaining sleeve for additional
strain relief, designed for PROFINET-compliant
IE FC RJ45 plug
■
Integrated autocrossover function makes the use of
uncrossed connection cables possible
■
Automatic detection and negotiation of the data
transmission rate by means of autosensing and
autonegotiation function
■
Remote diagnostics is performed by means of SNMP,
Web browser and PROFINET IO diagnostics
■
Support of PROFINET IRT for time-critical applications,
also with isochronous closed-loop control in the motion
control area (except CP 343-1 Lean/CP 343-1)
■
Integrated configuration and diagnostics in STEP 7
■
Integration of the CPs into existing network management infrastructure by means of SNMP access
■
Automatic e-mail sending function (Advanced CPs only)
■
IP routing between gigabit and PROFINET interface
(Advanced CPs only)
Industrial Ethernet Switching
© Siemens AG 2011
Port configuration for SCALANCE X Industrial Ethernet switches and
components with switch functionality
Gigabit Ethernet
10 / 100 /
1000 Mbit/s
1 Gbit/s
Fast Ethernet
10 Gbit/s 10 / 100
Mbit/s
Managed Switches
100 Mbit/s
Electrical
Optical
Type of module
Twisted Pair
Multimode
XR552-12M 1)
48x RJ45
48x SC/LC 48x SC/LC 4x LC
XR528-6M 1)
24x RJ45
24x SC/LC 24x SC/LC 4x LC
X414-3E 1)
2x RJ45
2x SC
2x SC
20x RJ45
12x BFOC
12x SC/BFOC
X408-2 1)
4x RJ45
4x SC
4x SC
4x RJ45
4x BFOC
4x BFOC
X302-7EEC 1)
2x RJ45
Singlemode
Electrical
Optical
Twisted Pair
POF/PCF Multimode
4x RJ45
X306-1LD FE
6x RJ45
2x RJ45
X307-3
2x SC
1x SC
5x RJ45
3x SC
X307-3LD
2x LC
7x RJ45
3x SC
2x SC
7x RJ45
X308-2
1x RJ45
X308-2LD
1x RJ45
2x SC
7x RJ45
X308-2LH
1x RJ45
2x SC
7x RJ45
X308-2LH+
1x RJ45
2x SC
7x RJ45
X308-2M 1)
8x RJ45
4x SC/LC
4x SC/LC
X308-2M TS 1)
8x RJ45
4x SC/LC
4x SC/LC
X308-2M PoE 1)
8x RJ45
4x SC/LC
4x SC/LC
X310
3x RJ45
7x RJ45
SCALANCE
X-300
7x RJ45
X310FE
10x RJ45
24x RJ45
XR324-4M EEC/
24x RJ45
XR324-4M PoE 1)
XF204/X204IRT/
XF204IRT
X202-2IRT
24x SC/LC 24x SC/LC
24x SC/LC/BFOC 24x SC/LC/BFOC
8x SC/LC
8x SC/LC/BFOC
8x SC/LC
8x SC/LC/BFOC
4x RJ45
2x RJ45
X202-2P IRT
2x RJ45
X201-3P IRT
1x RJ45
X200-4P IRT
2x BFOC
2x SCRJ
3x SCRJ
4x SCRJ
X204IRT PRO
4x RJ45
(Push Pull)
X202-2P IRT PRO
2x RJ45
(Push Pull)
X224
24x RJ45
X216
16x RJ45
X212-2
12x RJ45
X212-2LD
12x RJ45
X208/XF208
8x RJ45
X208PRO
8x M12
2x SCRJ
SCALANCE
X-200
2x BFOC
2x BFOC
X206-1/XF206-1
6x RJ45
X206-1LD
6x RJ45
1x BFOC
X204-2/XF204-2
4x RJ45
2x BFOC
X204-2TS
4x RJ45
2x BFOC
X204-2LD
4x RJ45
1x BFOC
2x BFOC
G_IK10_XX_10288
XR324-12M 1)
SCALANCE
X-400
7x LC
X304-2LD
X307-2EEC 1)
Singlemode
48x SC/LC/BFOC 48x SC/LC/BFOC SCALANCE
24x SC/LC/BFOC 24x SC/LC/BFOC X-500
1) The specified number of ports pertains to the max. possible number of devices per interface type.
The combined number of ports per device is provided in the specific technical data.
SCALANCE X managed Industrial Ethernet switches
Industrial Ethernet Switching
37
© Siemens AG 2011
Industrial Ethernet Switching
Port configuration for SCALANCE X Industrial Ethernet switches and
components with switch functionality
Fast Etherne
1000 Mbit/s
10 / 100 Mbit/s
100 Mbit/s
Electrical
Optical
Electrical
Optical
Twisted Pair
Multimode
Twisted Pair
POF/PCF
Singlemode
nmanaged Switches
Multimode
X124
24x RJ45
X116
16x RJ45
X112-2
12x RJ45
X108/X108PoE
8x RJ45
X106-1
6x RJ45
1x BFOC
X104-2
4x RJ45
2x BFOC
XB008G
8x RJ45
5x RJ45
4x RJ45
1x SC
XB004-1LD
XB004-1G
SCALANCE
X-100
5x RJ45
XB005
XB004-1LDG
2x BFOC
8x RJ45
XB008
XB005G
Singlemode
4x RJ45
4x RJ45
1x SC
SCALANCE
X-000
1x SC
XB004-1
4x RJ45
X005/XB005
5x RJ45
1x SC
G_IK10_XX_10289
Type of module
Gigabit Ethernet
10 / 100 /
1000 Mbit/s
SCALANCE X unmanaged Industrial Ethernet switches
Fast Ethernet
10 / 100 /
1000 Mbit/s
1000 Mbit/s
10 / 100 Mbit/s
100 Mbit/s
Electrical
Optical
Electrical
Optical
Twisted Pair
Multimode
Twisted Pair
POF/PCF
Singlemode
LOGO! CSM 12/24
4x RJ45
LOGO! CSM 230
4x RJ45
CSM 1277
4x RJ45
CSM 377
4x RJ45
CP 343-1 Lean
2x RJ45
CP 343-1
2x RJ45
CP 343-1 Advanced
1x RJ45
CP 443-1
CP 443-1 Advanced
4x RJ45
CP 1604
4x RJ45
CP 1616
4x RJ45
CP 1623
2x RJ45
Industrial Ethernet communications processors with switch functionality
38
Industrial Ethernet Switching
Singlemode
Module for
Logic module LOGO!
Module for
SIMATIC S7-1200
Module/CPs for
SIMATIC S7-300
2x RJ45
2x RJ45
1x RJ45
Multimode
CPs for
SIMATIC S7-400
CPs for
PG/PC
G_IK10_XX_10274
Type of module
Gigabit Ethernet
© Siemens AG 2011
Network management
The network management products SINEMA Server (SIMATIC
Network Manager) and SNMP/OPC Server support in monitoring and diagnosing wireless and wired networks in industrial
environments.
SINEMA Server network management
SINEMA Server network management software diagnoses and
visualizes Ethernet networks. It continuously logs network activities using various protocols such as SNMP, DCP, and LLDP,
makes them available to users and other systems on the network, e.g. HMI software such as WinCC, for evaluation and
further processing.
Depiction of network topology with SINEMA Server
Furthermore, the software offers an e-mail client function and
OPC server in order to forward network data and alarms to
other systems. SINEMA Server can be easily integrated in HMI
and visualization systems such as SIMATIC WinCC.
Changes in the network, such as the addition of new devices,
are reported to the user through the alarm console and saved
in a database. For the analysis of past network failures or as
evidence of network availability, the database information can
be prepared and documented as reports for a configurable period of time. The SINEMA user interface and the available features are accessible via the browser from any computers on
the network.
SNMP OPC Server
Clear analysis of network activities with SINEMA Server
Using autodiscovery, devices, their properties, and their topology are recognized and network statistics are compiled. These
can be displayed graphically and, if desired, also enhanced using individual diagnostics screens. In addition, cyclic data
from Ethernet participants is queried and network alarms are
signaled during runtime.
The information can be called up simultaneously by several
users in the network by means of a Web browser.
Through the SNMP OPC server the diagnostic and configuration data of SNMP-capable devices, such as network components, can be displayed in HMI systems such as WinCC or
in the SIMATIC Maintenance Station. Using this software,
standard maintenance data can be read and plant network
problems, such as failure of a line, can be quickly and easily
detected.
Configuration of SNMP diagnostics is integrated into STEP 7.
Ethernet devices can be read from a STEP 7 project or, using
the autodiscovery function, directly from the live network.
The user can easily add all devices detected there to the device
list for monitoring on the OPC Server.
Industrial Ethernet Switching
39
© Siemens AG 2011
Industrial Ethernet Switching
Diagnostics and network management
SCALANCE X-000
CSM
CP for S7-300
CP for S7-400
CP 1604
CP 1616
CP 1623
•
•
•
•
•
2)
2)
2)
2)
•
•
•
•
•
•
•
•
•
•
•
•
1) only SCALANCE X414-3E
2) Port diagnostics possible via integral web server
Industrial Ethernet switches and components with switch functionality: Network structure diagnostic options and logs
40
Industrial Ethernet Switching
Layer 3 (IP-Routing)
•
•
•
•
Multicast / broadcast limiting
•
•
•
•
RSTP
•
•
•
•
IGMP-Snooping/-Querier
•
•
•
•
VLAN
•
•
•
•
•
•
1)
G_IK10_XX_10138
SCALANCE X-100
•
•
•
•
•
Diagnostics via SNMP
SCALANCE X-200
•
•
•
•
•
Web-based management
SCALANCE X-300
•
•
•
•
•
•
•
•
•
•
•
•
PROFINET diagnostics
SCALANCE X-400
Message screen
SCALANCE X-500
Fault signaling contact
Module type
LED
Diagnostics options for components with switching functionality
© Siemens AG 2011
Industrial Ethernet
Networking with FastConnect
FastConnect for electrical cables
The rapid connection system FastConnect (FC) for Industrial
Ethernet enables industry-compatible network structures to
be set up within a short time using optimally matched components. It comprises:
• Industrial Ethernet FastConnect cables
specially designed for fast connection
(UL and CAT5e certified) as FC TP Standard,
FC TP Flexible, FC TP Trailing and FC TP Marine Cable
• User-friendly stripping technology with the
FastConnect stripping tool, enabling the outer sheath
and braided shield to be removed accurately in a single
operation.
• Cables prepared in this way are connected to the
FastConnect products using the insulation displacement
technique.
• IE FC RJ45 Plug and IE FC M12 Plug PRO
are insensitive to interference due to the rugged metal enclosure, and are the ideal solution forinstalling RJ45 or M12
connectors even at the field level (PROFINET-compliant).
• Industrial Ethernet FC Modular Outlets
are connection sockets for structured cabling with Fast and
Gigabit Ethernet
Advantages of the FastConnect system for electrical
cables
■
Comprehensive product range for flexible wiring in
industry in accordance with the innovative PROFINET
Industrial Ethernet standard
■
Minimized time taken to connect data terminals thanks
to safe stripping of the outer sheath and braided
shield in one step
■
Simple connection system
■
– Insulation-displacement contacts for 4-core (Cat5)
and 8-core (Cat6) Industrial Ethernet FC twistedpair installation cables
– SC or BFOC connection system for FC glass fiberoptic cable
Easy assembly for both TP cable types with the
preadjusted FC stripping tool or FC FO termination kit
for FC glass FOC
■
Reliable shield contact and strain relief thanks to
screw-on cover
■
Good EMC shielding and conduction (metal casing);
mistakes are prevented thanks to color coding and
the transparent terminal cover
■
RJ45 cabling technology is used as the existing
standard
Assembly with FastConnect for RJ45 and M12 connectors
Industrial Ethernet
41
© Siemens AG 2011
Industrial Ethernet
Networking with FastConnect
FastConnect for glass fiber-optic cables
For the FastConnect FOC system, fiber-optic cables with glass
core (62.5/200/230) are offered. They are suitable for easy
assembly in the field:
• FC FO Standard Cable GP;
62.5/200/230 with PVC casing for permanent indoor
installation
• FC FO trailing cable;
for use in tow chains and moving applications
• FastConnect glass fiber-optic cables are assembled on-site
using the FC FO termination kit. The termination kit permits the stripping and the "cleaving" of the fiber in the assembled connector.
• FastConnect SC and FastConnect BFOC connectors are
available for the assembly of FC glass fiber-optic cables
Assembly with FastConnect for glass fiber-optic cables
42
Industrial Ethernet
Advantages of the FastConnect system for glass
fiber-optic cables
■
Simple installation of the unassembled cable
■
Flexible connector assembly on site (SC/BFOC
connectors) without skilled personnel
■
Prevention of faults by simply checking the assembled
connectors on site using a microscope
■
Simple repair of FC glass fiber-optic cables in the field
© Siemens AG 2011
Industrial Ethernet Switching
Advantages at a glance
■
Rugged industry-compatible design
■
The right construction type for any application
■
Protection of investments: Existing networks can be
expanded with new products
■
Integration into existing concepts for network
security thanks to integral security functions
■
Broad-based use in small or large networks even
outside the control cabinet
■
Avoidance of additional training and familiarization
costs thanks to the use of standardized Ethernet
technology
■
High network and machine availability
■
One network for strict real time and standard TCP/IP,
saving on duplicated infrastructure
■
Reduction of downtimes due to saving of engineering and configuration data
■
Quick, easy and reliable cabling and the option of
self-assembly
■
On-site or remote parameterization and diagnostics
■
Support from SIMATIC Engineering Tools
■
Embedding in the SIMATIC error message concept
(system fault signaling, SFM) and PROFINET
■
Networking without the need for additional gateways
Industrial Ethernet Switching
43
© Siemens AG 2011
Get more information
SIMATIC NET:
http://www.siemens.com/automation/simatic-net
Info material for downloading:
http://www.siemens.com/automation/infocenter
SIMATIC Manuals Guide:
http://www.siemens.com/simatic-docu
Service & Support:
http://www.siemens.com/automation/service&support
SIMATIC NET contacts:
http://www.siemens.com/automation/partner
Industry Mall for electronic ordering:
www.siemens.com/industrymall
Siemens AG
Industry Sector
Sensors and Communication
Postfach 4848
90026 NÜRNBERG
GERMANY
www.siemens.com/automation
Subject to change without prior notice
Order No.: 6ZB5530-1AN02-0BA7
MP.R1.SC.ICBR.48.2.02 / Dispo 26000
BR 1111 4. ROT 40 En
Printed in Germany
© Siemens AG 2011
The information provided in this brochure contains descriptions
or characteristics of performance which in case of actual use do
not always apply as described or which may change as a result
of further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed
in the terms of contract. Availability and technical specifications
are subject to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third
parties for their own purposes could violate the rights of
the owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement