INSTALLATION
SADDLEBAG ACCENTS—SIDE of HARD BAGS
CUSTOMER SERVICE
PARTS INCLUDED
1
1
1
1
4
1
7752
877.370.3604 (toll free)
Right Front Saddlebag Accent
Left Front Saddlebag Accent
Right Side Saddlebag Accent
Left Side Saddlebag Accent
Alcohol Pads
Installation Instructions
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
ATTENTION! This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.
STEP 2
Identify left hand & right hand saddlebag accents. See PIC. 1.
STEP 3
Dry fit the Side Saddlebag Accents, the shape of the correct trim piece will
follow the corner of the saddlebag while in a horizontal position. See PIC. 2.
PIC 1
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
product(s).
●The product must be properly installed,
maintained and operated under
normal conditions.
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
products.
●Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.’S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
LEFT
SIDE
7752-21HD-0211
-cont.-
RIGHT
SIDE
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights
reserved.
STEP 4
Remove any grease or debris from the installation area on the side and
front of both saddlebags with soapy water and a clean rag; allow the area
to dry completely.
PIC 2
ATTENTION! Thoroughly clean the area of grease, oil, dirt, or other debris to
ensure proper adhesion. Küryakyn WILL NOT warranty any parts
lost due to improper installation.
SADDLEBAG
ACCENT
FOR SIDE
FRONT
SADDLEBAG
ACCENT
ATTENTION! The adhesive may not correctly bond if applied at temperatures less
than 50°F. Do not attempt this installation in temperatures less
than 50°F.
STEP 5
Clean the installation area with the included alcohol cleaning pad to remove
any residue. Allow the area to dry completely.
GROOVE HERE
WILL LINE UP
STEP 6
Rub the backing on the adhesive strip on the accent to activate the
adhesive before applying. Remove the tape backing and place the accent onto
the saddlebag; press firmly for 60 seconds, adhesive will fully cure in 24 hours.
STEP 7
Dry fit the Front Saddlebag Accent where the Side Saddlebag Accent ends on the front of the
saddlebag. The groove will align if you have the correct piece. PIC. 2.
ATTENTION! Thoroughly clean the area of grease, oil, dirt, or other debris to ensure proper adhesion.
Küryakyn WILL NOT warranty any parts lost due to improper installation.
ATTENTION! The adhesive may not correctly bond if applied at temperatures less than 50°F. Do not
attempt this installation in temperatures less than 50°F.
STEP 8
Rub the backing on the adhesive strip on the accent to activate the adhesive before applying.
Remove the tape backing and place accent onto the saddlebag; press firmly for 60 seconds,
adhesive will fully cure in 24 hours.
STEP 9
Repeat steps 7 and 8 for the other side.
PAGE
2
Ride On!
SADDLEBAG ACCENTS
INSTALLATION
">