MINI-PHANTOM Series For AC Power Generator ™
Project/Location:
Contractor:
MINI-PHANTOM™
Series
Date:
Prepared by:
For AC Power Generator
Lumacell Model:
FEATURES
TYPICAL SPECIFICATIONS
•Easy to retrofit in finished walls: the unit slides in through an 8.25-in by
5.75-in hole
•No back-box needed to pre-install
•Electrical box included, for wire connections
•Fully automatic operation: the unit door opens upon supply with AC
power and closes at the end of power back-up
•Input: 120VAC or 347VAC Output: 12VAC with up to 100W of power
•Emergency lights: MR16 halogen lamps; power range from 12 to 50W
•Certification: CSA C22.2 No. 141
Supply and install Lumacell® Series Mini-Phantom™. The unit shall be
designed to be completely concealed in walls with a cavity. The equipment
shall consist of a metal housing containing two modules joined by a flexible
bracket and electric conduit. One module contains the power transformer and
electrical connection box; the other module contains the emergency lights
installed on the back of a door able to rotate several turns of 360°. The unit
equipment shall be completely concealed in the wall, after the installation
through a rectangular opening not larger than 8.25-in by 5.75-in.
In stand-by mode, the only visible parts of the unit shall be the off-white flat
door and trim plate that can be customized on site with paint or other suitable
wall covering. Upon AC power supply the unit will expose the emergency heads
by rotating its door 180° and then will power the lamps. At the end of the AC
power, the lamps will turn off and the unit will retract the heads by rotating
the door 180° in the same direction. The unit shall not require the presence of AC power in order to close the door
and conceal the lights. The door of the unit shall be easy to force-turn (open or
close) by hand. The light source shall be 12V MR16 halogen lamps of specified
wattage and light output.
The remote unit shall be the Lumacell® model: MPG
.
DIMENSIONS
Dimensions are approximate and subject to change.
91/8” [23.2cm]
7” [17.8 cm]
51/4” [13.2cm]
COMPLETE UNIT
REPLACEMENT LAMPS
MODEL
73/4” [19.7cm]
31/2” [8.9 cm]
175/8” [44.9 cm]
INSTALLED UNIT
VOLTAGE/WATTAGE
580.0080-L
12V-12W
580.0064-L
12V-20W
580.0083-L
12V-35W
580.0076-L
12V-50W
580.0068-L
12V-20W High output
580.0090-L
12V-35W High output
580.0089-L
12V-50W High output
580.0093-L
12V-4W LED
580.0104-L
12V-5W LED
580.0106-L
12V-6W LED
See the complete list p.144 to 146.
IN THE SAME FAMILY:
- Mini Phantom™ Series Battery Unit
p. 93
ORDERING INFORMATION: MR16
SERIES
MP
UNIT CAPACITY
G= remote AC generator,
maximum 100W
LAMP WATTAGE
12W= MR16, 2x 12W
20W= MR16, 2x 20W
35W= MR16, 2x 35W
50W= MR16, 2x 50W
20WH= MR16, 2x 20W high output
35WH= MR16, 2x 35W high output
50WH= MR16, 2x 50W high output
LD7= MR16 LED, 12V-4W
LD9= MR16 LED, 12V-5W
LD10= MR16 LED, 12V-6W
AC VOLTAGE
Blank= 120VAC
ZC= 277VAC
ZD= 347VAC
EXAMPLE: MPG35WH
www.lumacell.com
129
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement