English Manual
ASSEMBLY
MANUAL
85-3054-2 (G41801) Propane
85-3055-0 (G41802) Natural Gas
Cuisinart® Gourmet 600
READ AND SAVE MANUAL FOR FUTURE REFERENCE.
Assemble your grill immediately.
Missing or damaged parts should be claimed within 30 days of purchase.
For product inquiries, parts, warranty and troubleshooting support, please call 1-800-309-3452.
www.cuisinartbbqs.com
LIMITED 5-YEAR WARRANTY
Manual Revision #: 28112011 PD
HARDWARE PACK
Tools Needed for Assembly
No.
Description
Part Number
Qty.
• #2 Phillips screwdriver (long and short)
1
2
3
4
5
6
7
1/4"-20UNCX13 Screw
1/4"-20UNCX38 Screw
Φ7 Lock Washer
Φ7 Washer
ST4.2X10 Tapping Screw
φ5 Washer
U Pin
20120-13013-250
20120-13038-250
41400-07000-250
40300-07000-250
22500-42010-137
40300-05000-250
G350-0026-9000
16
8
24
24
10
4
1
• ¼” Slotted screwdriver (long and short)
• Adjustable wrench
• Pliers
• Rubber Mallot
H E AV Y A RT I C L E N E E D S 2 T O L I F T
THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES
Before assembling the barbecue, read
these instructions carefully.
Assemble the barbecue on a flat, clean surface.
Grill is heavy.
Note: Do not fully tighten all the nuts
during this initial stage
To ORDER non-warranty replacement parts or accessories,
or to register your warranty, please visit us on the web at
www.cuisinartbbqs.com
CAUTION
DANGER
Sharp edges. Wear gloves when assembling
your grill.
CAUTION
Read and follow all safety statements,
assembly instructions, use and care directions
before attempting to assemble and cook.
INSTALLER OR
ASSEMBLER/CONSUMER
This manual should be kept with the BBQ at
all times.
WARNING
Failure to follow all of the Manufacturer’s
instructions could result in hazardous fires,
explosions, property damage, or serious
personal injury or even death.
1.If you smell Gas:
a. Shut off gas to the appliance
b. Extinguish any open flame
c. Open lid
d. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department
2.Do not store or use gasoline or other
flammable liquids or vapours in the vicinity of
this or any other appliance.
Caution:
Sheet metal can cause injury. Wear gloves when installing the grill.
1
1/4”-20UNCX13 Screw
X 16
4
3.An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
DANGER
1.Do not store or use gasoline or other
flammable liquids or vapours in the vicinity of
this or any other appliance.
2.An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
2
3
1/4”-20UNCX38 Screw
X8
5
Φ7 Washer
X 24
Φ7 Lock Washer
X 24
6
ST4.2X10 Tapping Screw
X 10
φ5 Washer
X4
7
U Pin
X1
Follow all leak check procedures carefully prior
to operation of barbecue, even if grill was dealer
assembled. Do not try lighting this BBQ without
reading the Lighting Instructions section of the
Safety and Care Manual that accompanies this
grill.
T H I S B A R B E C U E I S F O R O U T D O O R U S E O N LY
CUISINART ® CUST O M E R CARE HO T LI NE
1- 8 0 0 - 3 0 9 - 3 4 5 2
2
1
PARTS LIST (PROPANE) FOR 85-3054-2 (G41801)
Item No.
Qty.
Description
Part No.
Item No.
Qty.
Description
Part No.
AA
1
Top Lid
G418-2000-01
DA
1
Side Shelf Table, Left
G525-0700-01
AB
1
Lid Handle
G412-0035-01
DB
1
Side Shelf Fascia, Left
G418-0600-01
AC
1
Thermometer
G512-0085-01
DC
2
Towel Bar
G525-0029-01
AD
2
Screw for Top Lid
G501-0005-02
DD
1
Electronic Ignition Button
G525-0028-01
AE
2
Lid Bumper, Front
G508-0063-01
DE
1
Side Shelf Table, Right
G418-0900-01
AF
2
Lid Bumper, Back
G501-0066-01
DF
1
Side Shelf Fascia, Right
G418-1000-01
AG
1
Logo Plate
G418-0002-01
EA
1
Left Cart Side Panel
G525-0018-01
1
Burner Box Assembly
G418-4000-01
EB
1
Right Cart Side Panel
G525-0019-01
BB1
2
Main Burner - A
G413-5000-01
EC
1
Front Panel
G418-0010-01
BB2
1
Main Burner - B
G412-3800-01
ED
1
Bottom Shelf, LP
G418-0500-01
BC
2
Carryover Assembly
G413-0004-01
EE
2
Locking Wheel
G350-0023-01
BD
3
Flame Tamer
G413-0036-01
EF
2
Wheel
G350-0024-01
BE
2
Cooking Grate
G412-0028-01
BF
1
Warming Rack
G413-0002-01
F1
1
Hardware Pack
G418-B001-01
BG
1
Upper Back Panel
G418-0011-01
F2
1
Assembly Manual
G418-M001-01
BH
1
Match holder
G608-0019-01
1
Manifold Assembly, LP
G418-6000-01
CB
1
Regulator
G606-0008-01
CC
3
Control Knob
G525-0013-01
CD1
1
Electronic Ignition Assembly
G522-00A5-02
CD2
1
Electronic Ignition Battery Cap G515-0030-01
CE
3
Electrode Set, Main Burner
G418-0007-01
CF
1
Control Panel
G418-0005-01
CG
1
Heat Shield
G418-0008-01
CH
1
Grease Tray
G418-0700-01
CI
1
Grease Cup
G416-0015-01
CJ
3
Bezel, Control Knob
G525-0012-01
CK
1
Front Brace
G418-0009-01
BF
BC
BE
BB1
AD
BA
CA
EXPLODED DIAGRAM (PROPANE)
FOR 85-3054-2 (G41801)
F3
1
Safe Use and Care Manual
G418-M001-02
F4
1
Tank Screw
G505-0047-01
BB2
AF
AE
CE
AA
BD
CJ
AC
AG
CC
DC
DC
AB
DE
DA
DF
BA
BH
DB
DD
CF
CD2
CD1
CA
EC
CB
CG
BG
CK
ED
CH
EB
CI
EA
EE
EF
EXTRAS
Hardware
Pack
F1
2
Assembly
Manual
Safe Use
& Care
Manual
F2
F3
Tank
Screw
F4
3
PARTS LIST (NATURAL GAS) FOR 85-3055-0 (G41802)
Item No.
Qty.
Description
Part No.
Item No.
Qty.
Description
Part No.
AA
1
Top Lid
G418-2000-01
DA
1
Side Shelf Table, Left
G525-0700-01
AB
1
Lid Handle
G412-0035-01
DB
1
Side Shelf Fascia, Left
G418-0600-01
AC
1
Thermometer
G512-0085-01
DC
2
Towel Bar
G525-0029-01
AD
2
Screw for Top Lid
G501-0005-02
DD
1
Electronic Ignition Button
G525-0028-01
AE
2
Lid Bumper, Front
G508-0063-01
DE
1
Side Shelf Table, Right
G418-0900-01
AF
2
Lid Bumper, Back
G501-0066-01
DF
1
Side Shelf Fascia, Right
G418-1000-01
AG
1
Logo Plate
G418-0002-01
EA
1
Left Cart Side Panel
G525-0018-01
1
Burner Box Assembly
G418-4000-01
EB
1
Right Cart Side Panel
G525-0019-01
BB1
2
Main Burner - A
G413-5000-01
EC
1
Front Panel
G418-0010-01
BB2
1
Main Burner - B
G412-3800-01
ED
1
Bottom Shelf, NG
G418-0800-01
BC
2
Carryover Assembly
G413-0004-01
EE
2
Locking Wheel
G350-0023-01
BD
3
Flame Tamer
G413-0036-01
EF
2
Wheel
G350-0024-01
BE
2
Cooking Grate
G412-0028-01
BF
1
Warming Rack
G413-0002-01
F1
1
Hardware Pack
G418-B001-01
BG
1
Upper Back Panel
G418-0011-01
F2
1
Assembly Manual
G418-M001-01
BH
1
Match holder
G608-0019-01
F3
1
Safe Use and Care Manual
G418-M001-02
1
Manifold assembly, NG
G418-2200-01
CB
1
Natural gas Hose
G501-0099-01
CC
3
Control Knob
G525-0013-01
CD1
1
Electronic Ignition Assembly
G522-00A5-02
CD2
1
Electronic Ignition Battery Cap G515-0030-01
CE
3
Electrode Set, Main Burner
BF
BC
BE
BB1
AD
BA
CA
EXPLODED DIAGRAM (NATURAL GAS)
FOR 85-3055-0 (G41802)
CF
1
Control Panel
G418-0005-01
1
Heat shield
G418-0008-01
CH
1
Grease Tray
G418-0700-01
CI
1
Grease Cup
G416-0015-01
CJ
3
Bezel, Control Knob
G525-0012-01
CK
1
Front Brace
G418-0009-01
AF
AE
CE
AA
BD
CJ
AC
AG
CC
DC
DC
AB
DE
DA
BA
DF
BH
DB
DD
CF
CD2
CD1
G418-0007-01
CG
BB2
CA
EC
CB
CG
BG
CK
ED
CH
EB
CI
EA
EE
EF
EXTRAS
Hardware
Pack
F1
4
Assembly
Manual
Safe Use
& Care
Manual
F2
F3
5
ASSEMBLY INSTRUCTIONS
1.
ASSEMBLY INSTRUCTIONS
Separate the 2 different types of wheels: 2
Locking Wheels (EE) and 2 regular Wheels (EF).
EF
Insert the U Pin (#7) into one of the regular
Wheels (EF), as shown in image B. Attach the
regular Wheel (EF) to the front of the Bottom
Shelf (ED), and use the U Pin (#7) to secure and
tighten.
EE
3.
Attach the Front Brace (CK) to the Left and
Right Cart Side Panels (EA and EB).
TIP: One person should align the left side,
while the second person assembles the
right side.
CK
EB
EA
Repeat for remaining 3 wheels (EE & EF).
A
NOTE: Regular Wheels (EF) need to be
assembled to the front of the Bottom
Shelf (ED), and Wheels with Lock (EE)
need to be assembled to the back of
the Bottom Shelf (ED), as shown in
image A.
ED
Back view
EF
A
B
3
4
X2
X2
X2
Back view
CK
EA
YOU WILL NEED:
B
X1
Close up
Close up
2.
Ensure that the Wheels are firmly locked in the
“ON” position before continuing.
EB
Assemble the Left Cart Side Panel (EA) and the
Right Cart Side Panel (EB) to the Bottom Shelf
(ED).
4.
CK
Attach the Front Panel (EC) to the Left and
Right Cart Side Panels (EA & EB), as shown.
EB
YOU WILL NEED:
EA
EC
6
5
YOU WILL NEED:
6
1
3
4
ED
A
6
2
6
7
#7
EA
YOU WILL NEED:
X6
ED
X6
X6
X4
Front view
Front view
EC
EA
ED
EB
EA
B
Close up
Back view
6
7
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
5.
THIS STEP REQUIRES 3 OR MORE
PEOPLE. DO NOT ATTEMPT ALONE.
EXTREMELY HEAVY.
A+B
6.
a. Open the lid. Assemble the Left Side Shelf
(DA and DB) to the Cart Assembly by inserting
the Side Shelf tabs into the holes on the Cart
Assembly (figure A).
a. Position the Top Lid and Burner Box
Assembly (A and B) onto the Cart Assembly
(C), as shown.
BA
DA
DB
A
C
Front, left side view
DA
A
b. Secure using hardware, as shown in figure B
and C.
YOU WILL NEED:
b. Assemble Burner Box Assembly (A and B)
the Left and Right Cart Side Panels (EA and
EB), as shown.
A+B
YOU WILL NEED:
6
1
3
BA
DB
4
6
1
3
4
X2
X2
X2
B
EB
EA
X4
X4
X4
View under left side shelf
YOU WILL NEED:
B
DA
Back view, right side assembly
c. Assemble the front of the Burner Box
Assembly (A and B) to the Front Brace (CK),
as shown.
6
5
6
X2
X2
BA
A+B
YOU WILL NEED:
6
2
3
4
C
DB
View under left side shelf
CK
C
X2
X2
X2
TIP: One person should align the Front
Brace (CK) from inside the cart, while
the other person completes the
hardware assembly from the outside.
Front view
8
9
ASSEMBLY INSTRUCTIONS
7.
CF
ASSEMBLY INSTRUCTIONS
a. Assemble the Towel Bar (DC) to the Control
Panel (CF) and Left Side Shelf Table (DA), as
shown in figure A & B.
DC
8.
a. Open the lid. Assemble the Right Side
Shelf (DE and DF) to the Cart Assembly by
inserting the Side Shelf tabs into the holes on
the Cart Assembly, as shown in figure A.
BA
DE
DA
A
DF
YOU WILL NEED:
6
1
3
A
4
b. Secure using hardware, as shown in figure B
and C.
DC
X1
X1
DE
X1
YOU WILL NEED:
DF
DB
B
6
1
3
4
X2
X2
X2
BA
DA
DB
b. Attach the two Ignition Button wires to the
Electronic Ignition Button (DD), as shown in
figure C.
B
View under right side shelf
YOU WILL NEED:
DE
DD
BA
6
5
6
X2
X2
C
View under left side shelf
C
DF
View under right side shelf
10
11
ASSEMBLY INSTRUCTIONS
9.
ASSEMBLY INSTRUCTIONS
Assemble the Towel Bar (DC) to the Control
Panel (CF) and Right Side Shelf Table (DE), as
shown in figure A and B.
CF
11.
a. Place the Heat Shield (CG) into the two
grooves on the Front Brace (CK), as shown
in figure B.
DC
BG
DE
A
CG
Right side view
YOU WILL NEED:
DC
6
1
3
4
X1
X1
X1
A
Back view
CK
B
DE
CG
Right side view
10.
Attach the Upper Back Panel (BG) to both the
Left and Right Cart Side Panels (EA and EB).
B
Front view
BG
YOU WILL NEED:
6
2
3
b. Attach the Heat Shield (CG) to the Upper
Back Panel (BG) by using the self tapping
screws, as shown in figure C.
4
YOU WILL NEED:
BG
EB
EA
X4
X4
CG
X4
6
5
Back View
C
X2
Back view
BA
EA
Close up, left side view
12
13
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
12.
a.Remove the Electronic Ignition Battery Cap
(CD2) and the plastic nut from the Electronic
Ignition Box (CD1).
13.
a. Insert the Grease Tray (CH) into the opening
in the Upper Back Panel (BG), making sure to
engage tracks located under the Burner Box
Assembly (BA).
b. Feed the Electronic Ignition Assembly (CD1)
through the opening in the Left Cart Side
Panel (EA) and secure using the nut.
CD2
CD1
A
CH
EA
CI
c.Insert one “AA” battery into the battery
compartment with the positive end facing
outward, as shown. Secure using the
Electronic Ignition Battery Cap (CD2).
CD2
b. Place the Grease Cup (CI) onto the tracks
located on the underside of the Grease Tray
(CH).
BG
CAUTION: Be careful when removing
the Grease Tray (CH) and the Grease
Cup (CI). When in position, the Grease
Cup (CI) will sit recessed under the
burner box (BA).
A
Back view
+ -
CD1
B
TIP: The Electrode Set, Main Burner (CE) wires
can be found attached to the Control
Panel heat shield (CF), as shown.
CF
14.
CE
C
a. Place the Flame Tamers (BD) into the Burner
Box (BA).
BD
d. Insert the three Electrode Set, Main Burner
(CE) wires into the Electronic Ignition
Assembly (CD1), as shown in figure D.
BA
CE
CD1
A
D
b.Place the Cooking Grates (BE) into the
Burner Box (BA), as shown.
BE
e. Insert the two Electronic Ignition Button (DD)
wires into the Electronic Ignition Assembly
(CD1), as shown in figure E.
CE
BA
CD1
E
14
DD
B
15
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
14.
c.Place Warming Rack (BF) onto Burner Box
(BA) by inserting the three positioning rods
into the rear panel of the Burner Box (BA),
as shown.
BF
16.
FOR NATURAL GAS MODEL ONLY.
a. Attach the Natural Gas Hose (CB) to the
Manifold Assembly (CA), as shown.
b. Perform Leak Test. See page 6 of the
Cuisinart® Safety and Care Manual.
BA
CA
C
CB
View under right side shelf
15.
ATTENTION: In order to complete
installation of your Natural Gas BBQ a
1/2” or 3/8” adapter may be required to
connect your BBQ’s Natural Gas hose
to your home gas supply. Contact your
Natural Gas supplier to purchase the
necessary part.
FOR PROPANE MODELS ONLY.
For natural gas models, follow step 16.
a.Position the Regulator hose (CB) through the
hole in the Right Cart Side Panel (EB).
EB
CB
b.Position the 20 lb propane tank onto the
bottom shelf (ED), and secure using the
bolt (F4) (already attached) located on the
underside of the bottom shelf, as shown in
figure B.
ED
EC
A
c. Attach the Regulator coupling nut (CB) to
the LP cylinder valve. Be careful not to cross
thread. Hand tighten only.
d. Perform leak test. See page 4 of the
Cuisinart® Safety & Care Manual.
F4
B
ED
ATTENTION: For your families safety,
do not attempt to light this BBQ until
you have reviewed pages 4-8 of the
Cuisinart® Safety and Care Manual.
All Safety and Leak test MUST BE
PERFORMED BY THE END USER,
prior to lighting this BBQ.
WARNING Do not store extra
propane tanks within BBQ cart.
16
17
Visit www.cuisinartbbqs.com
to complete product registration.
Cuisinart® is a registered
trademark used under license
© 2011 Winners Products
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising