Quick Start Guide - ACCDPS261B Accessory Power over Ethernet Switch

Quick Start Guide - ACCDPS261B Accessory Power over Ethernet Switch
16+2 High-Power PoE Switch
1
2
IP Cameras*
Quick Start Guide
3
Router/LAN*
NVR or other non-PoE
device* (optional)
Up to 300ft / 91m
Front Panel
SFP ports – remove
dust caps to use
Default Switch Information
Static IP address: 192.168.0.100
Subnet mask: 255.255.255.0
4
Back Panel
Power
100-240V AC
Default Access Information
Username: admin
Password: admin
*Not included/sold separately
ACCDPS261B_QSG_EN_R1
16+2 High-Power PoE Switch
Quick Start Guide
Technical Specifications
LED Indicators
System
Name
Specification
Ports
16x 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
2x 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
2x 1000Base-X SFP interfaces, shared with ports 17 and 18
PoE Standard
IEEE 802.3af / 802.3at PoE / PSE
PoE Power Output
Per Port 52V DC, Max. 30.8 watts
Total Power Ouput
220 watts across ports 1~16
Name
Color
Meaning
PoE Class
Class 0/1/2/3/4
PWR
Green
ON: The switch is receiving power.
OFF: The switch is not powered.
Standard Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber-Optic
IEEE 802.3x Full-duplex flow control
IEEE 802.1Q VLAN
IEEE 802.1p QoS
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Operating Humidity
5 ~ 95% (non-condensing)
Operating
Temperature
32 ~ 122F / 0 ~ 50C
Power Input
100~240V AC, 50/60Hz, 4A
Dimensions
(W x D x H)
17.3” x 7.9” x 1.8”
440 x 200 x 44.5mm (W x D x H)
1U height
Weight
2.55kg / 5.62lbs.
Port 1 to Port 16
Name
Color
Meaning
LNK/ACT
Green
ON: Successfully established link at 10/100Mbps.
Flashing: Switch is sending/receiving data.
OFF: No connection.
POE
Orange
ON: Port is providing 52V DC in-line power.
OFF: Connected device is not a PoE Powered Device (PD).
Port 17 and Port 18 (RJ-45 or SFP)
Name
Color
Meaning
LNK/ACT
Green
Flashing: Switch is sending/receiving data.
OFF: No connection.
100/1000
Green
ON: Port is established at 1000Mbps.
Slow Flashing: Port is established at 100Mbps.
OFF: Port is established at 10Mbps.
PoE Power Usage
Name
Meaning
50W
ON: PoE power consumption is 50W or greater across ports 1~16.
100W
ON: PoE power consumption is 100W or greater across ports 1~16.
150W
ON: PoE power consumption is 150W or greater across ports 1~16.
190W
ON: PoE power consumption is 190W or greater across ports 1~16.
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
ACCDPS261B_QSG_EN_R1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement