SF4000-95/99 Technical Specifications

SF4000-95/99 Technical Specifications
TYPICAL APPLICATIONS:
SAFETY FILTER
Model SF400095 / SF400099
Specifications and Technical Data
Features:
•
Increased Protection – Provides backup filtration in the event of
primary filter failure
•
Two HEPA Filters 95% or 99.97%
•
Cam-Lock Design -- Positive Seal
•
Rated at 4000 CFM
•
Modular Design – Bolts Together for Higher CFM Applications
•
Easy to Install – Flanges on intake and exhaust sides –
attaches to ductwork with sheet metal screws.
TYPICAL INSTALLATION
•
Return of Cleaned Air Back Into the Plant
•
High Efficiency Afterfilter
•
In Duct Applications
Options:
•
•
95% Hepa Filtration
99.97% Hepa Filtration
Specifications
Overall Dimensions: 27” H x 42” W x 22” L
Weight: 115 lbs. without filters, 175 lbs with filters.
Cabinet: 16-gauge welded galvanized steel .
Finish: Industrial grade, textured, baked crimson red
enamel paint, inside and out.
Filters: 20” x 24” x 12” Nominal, Two per module.
Filter Access: Side Load with positive seal door.
Air Flow: Designed to handle positive or negative pressure.
Right to Left air flow.
Warranty: Standard two-year warranty.
Specifications subject to change without notice.
Sold and Serviced by:
L2262-02/05
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement