MuxLab 500415 Specifications

MuxLab 500415 Specifications
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video over Fiber
./Multiplexers;Digital/3419
Index1.Networking Systems//Video Products//Video Security Systems
Video Multiplexers
INTERLOGIX
PR7939V2-12356.tif
PR92192V2-728951.tif
2-CHANNEL DIGITAL MULTIPLEXER, CHOOSE FROM SM OR MM TRANSMISSION OVER
A SINGLE FIBER
Anixter No. Vendor No.
Description
243517
VT7220
MM, transmitter
243518
VT7230
SM, transmitter
304104
VT7220-R3
MM, transmitter rack-mount
254994
VT7230-R3
SM, transmitter rack-mount
243519
VR7220
MM, receiver
304013
VR7220-R3
MM, receiver rack-mount
243520
VR7230
SM, receiver
254996
VR7230-R3
SM, receiver rack-mount
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8-CHANNEL DIGITAL MULTIPLEXER, SM OR MM TRANSMISSION OVER A
SINGLE FIBER
Anixter No. Vendor No.
Description
243537
VT7820
MM, transmitter, 1300 nm, 1F
304121
VT7820-R3
MM, transmitter, 1300 nm,
1F, rack-mount
240380
VT7830
SM, transmitter, 1300 nm laser, 1F
304123
VT7830-R3
SM, transmitter, 1300 nm laser,
1F, rack-mount
243538
VR7820
MM, receiver, 1300 nm, 1F
393836
VR7820-R3
MM, receiver, 1300 nm, 1F, rack-mount
240385
VR7830
SM, receiver, 1300 nm laser, 1F
304028
VR7830-R3
SM, receiver, 1300 nm laser,
1F, rack-mount
16-CHANNEL DIGITAL MULTIPLEXER, SM OR MM TRANSMISSION OVER A
SINGLE FIBER
Anixter No. Vendor No.
Description
243541
VT71620-R3
MM, transmitter, 1300/1550 nm,
1F, rack-mount
243542
VR716020-R3
MM, receiver, 1300/1550 nm,
1F, rack-mount
243543
VT71630-R3
SM, transmitter, 1300/1550 nm,
1F, rack-mount
243544
VR71630-R3
SM, receiver, 1300/1550 nm,
1F, rack-mount
8.3
Video Transmission, Media Conversion and Wireless
Interlogix offers a complete line of analog and digital video multiplexers - from two
channels to 32 channels of video. In addition, they provide a multitude of
multiplexers that combine video/data and video/audio.
Options: PS-12VDC 12-volt DC plug-in power supply (included).
PS-12VDC-230 12 volt DC plug-in power supply, 230 V AC input (included if specified
at time of order). Add '-R3' to model number for R3 Rack-Mount - no charge. (Requires
R3 rack purchased separatel, which is found in the Accessories section.) Add 'C' for
conformal coated printed circuit boards. Consult your salesperson.
FEATURES
• Choice of analog FM or digital transmission
• 10 MHz bandwidth per channel
• No in-field adjustments
• Power and signal status LEDs to monitor system performance
• Real-time color transmission
• Wide operating ambient temperature range (-40 to 74C)
4-CHANNEL DIGITAL MULTIPLEXER, SM OR MM
Anixter No. Vendor No.
Description
243525
VT7420
MM, transmitter, 1F
304116
VT7420-R3
MM, transmitter, 1F, rack-mount
252242
VT7430-R3
SM, transmitter, 1300 nm laser,
1F, rack-mount
243526
VR7420
MM, receiver, 1300 nm, 1F
272167
VR7420-R3
MM, receiver, 1300 nm, 1F, rack-mount
243529
VR7430
SM, receiver, 1300 nm laser, 1F
254102
VR7430-R3
SM, receiver, 1300 nm laser,
1F, rack-mount
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video over Fiber
Transmitters;Video/11017
Index1.Networking Systems//Video Products//Video Security Systems
S700V and S702V Video-transmission System
Video Transmission, Media Conversion and Wireless
INTERLOGIX
PR14959V2-34015.tif
The S700V Series video system is designed to transmit one or two channels of
baseband composite video up to 3.2 miles (5.2 km). It provides superior performance
and reliability at an economical price. The S700V is available in three versions: (1)
compact stand-alone modules providing one video channel on one fiber, (2)
rack-mounted cards providing one video channel on one fiber, and (3) rack-mounted
cards that support two video channels on two fibers. The S700V Series meets the
challenge for a low-cost, high-performance, fiber optic video-transmission system.
FEATURES
• OAGC circuitry
• Works with all cameras
• Transmits up to 3.2 mi. (5.2 km)
• Stand-alone or rack modules
• Dual-channel rack modules
D
Anixter No. Vendor No.
Description
240217
S700VT-EST
1 fiber, transmitter
240218
S700VT-TST
Miniature, single channel
240219
S700VR-EST
Receiver only
240627
S702VT-EST
2 fiber, transmitter
240628
S702VR-EST
2 fiber, receiver
Transmitters;Video/3279
Index1.Networking Systems//Video Products//Video Security Systems
S706V/S7706 Digital Video Fiber System
INTERLOGIX
PR14961V2-34019.tif
The S706V and S7706V fiber links accept analog baseband video, convert it to digital
and transmit it as an 8-bit digital signal over optical fiber. Digital transmission of
video with a signal-to-noise ratio of >60 dB assures noise-free video at the receiver.
The S706V and S7706V support all major video formats. Resolution of greater than
520 TV lines guarantees faithful reproduction of high-resolution closed-circuit video
images. The S706V and S7706 meet or exceed the requirements of the EIA/TIA 250C
Medium Haul Standard. The S706V and S7706V also feature unique
SMARTS Technology.
8.4
FEATURES
• 8-bit digital video transmission
• SMARTS built-in diagnostics
• Optical budget: 13 dB MM; 18 dB SM
• Operates up to 37 miles (60 km)
• Solid-state short-circuit protection
• 24 V AC/13.5 V DC transmitter power
Anixter No. Vendor No.
340331
S706VT-ESTL
273612
S706VR-ESTL
342202
S7706VT-EST
273613
S7706VR-EST
Description
Multimode 1-fiber link, transmitter
Multimode 1-fiber link, receiver
Single-mode 1310 nm 1-fiber
link, transmitter
Single-mode 1310 nm 1-fiber
link, receiver
Multiplexers;Video/11016
Index1.Networking Systems//Video Products//Video Security Systems
S707V 4-channel Digital Video Multiplexer System
INTERLOGIX
PR14963V2-34005.tif
The S707V Video Multiplexer System represents a technological breakthrough in the
simultaneous transmission of multiple full-frame, real-time video signals (color or
monochrome) over one multimode or single-mode fiber. The 4-channel system
features a 6.2 MHz per-channel bandwidth and optical automatic gain control
(OAGC). It accepts analog baseband inputs and converts them to digital format for
transmission, assuring high-quality video outputs at the receiver. The system is
compatible with all major formats.
Unique SMARTS Diagnostics includes a built-in video test-pattern generator on the
transmitter for system setup and onscreen diagnostics to indicate insufficient optical
power or an inactive video channel for each output.
FEATURES
• Four channels of one-way video
• Digital multiplexing technology
• 500 TV lines resolution
• Supports all major video formats
• Solid-state circuit protection
• Hot-swappable rack cards
Anixter No. Vendor No.
Description
258668
S707VT-ESTL
Transmitter
258669
S707VR-ESTL
Receiver
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video over Fiber
Multiplexers;Video/3278
Transmission Systems;CCTV/4154
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
S708V/S7708V 8-channel Digital Video Multiplexer System
INTERLOGIX
PR14962V2-33991.tif
Single-channel 3-ports-per-card Rack-mount
FM Video-transmission Systems
AMERICAN FIBERTEK
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
The American Fibertek M-30 Series products transmit and receive three channels of
high-quality video on three multimode optical fibers using FM transmission. This
system is designed to be completely transparent to all camera and monitor
manufacturers. Products require no field adjustments at installation or additional
maintenance thereafter. Diagnostic indicators provide a quick visual indication of
system status. The 30 Series are ordered as rack cards and are mounted in the
American Fibertek SR-20/2 Card Cage. These units are compatible with the
M100 series of single-channel video transmitters and receivers.
FEATURES
• For distances up to 24 km (14+ mi.)
• Full-color transmission
• Diagnostic indicators for video, power and optical presence
• Compatible with M100/M300/M300S transmitters and receivers
• "High density" - 42 video ports per rack
• Least-expensive video link available
• Single-mode and multimode versions available
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
850 NM - 2.0 KM
Anixter No. Vendor No.
258316
RTM-30
258317
RRM-30
1300 NM
Anixter No. Vendor No.
258318
RTM-33
258320
258321
RRM-33
RTM-33S
258322
RRM-33S
Description
MM "3-up" rack-mount transmitter
MM "3-up" rack-mount receiver
Description
MM "3-up" rack-mount transmitter
7.0 km
MM "3-up" rack-mount receiver 7.0 km
SM "3-up" rack-mount transmitter
24.0 km
SM "3-up" rack-mount receiver 24.0 km
8.5
Video Transmission, Media Conversion and Wireless
The S708V/S7708V Digital Video Multiplexer System uses revolutionary CWDM
technology to provide simultaneous long-range transmission of multiple full-frame,
real-time video signals over one multimode fiber. The eight-channel system features a
bandwidth of 6.2 MHz per channel and optical automatic gain control (OAGC). It
accepts analog baseband input signals and converts them to digital format for
transmission, assuring high-quality video outputs at the receiver. Unique SMARTS
Technology includes a built-in video test-pattern generator on the transmitter for
system setup and onscreen diagnostics to indicate insufficient optical power or an
inactive video channel for each output.
FEATURES
• Eight video channels on a single fiber
• 10-bit digital encoding
• 500 TV lines resolution
• Color or monochrome
• SMARTS diagnostics
• Optical automatic gain control
• Solid-state short-circuit protection
Anixter No. Vendor No.
Description
252919
S708VT-EST
Multimode, 850/1300 nm, transmitter
273609
S708VR-EST
Multimode, 850/1300 nm, receiver
340333
S708VT-ESTL
Multimode, 1310/
1330 nm, transmitter
273610
S708VR-ESTL
Multimode, 1310/1330 nm, receiver
342206
S7708VT-EST
Single-mode, 1310/
1550 nm, transmitter
273611
S7708VR-EST
Single-mode, 1310/1550 nm, receiver
PR21511V2-122441.tif
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Video Transmission, Media Conversion and Wireless
Analog Video over Fiber
Transmission Systems;CCTV/4160
Video Systems;CCTV/4161
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel, Low-cost, FM Video-transmission Systems
Single-fiber 4-channel Video System
AMERICAN FIBERTEK
AMERICAN FIBERTEK
PR21511V2-122441.tif
The American Fibertek M100/M300/M300S Series products transmit and receive
single-channel high-quality video using FM transmission. This system is designed to
be completely transparent to all camera and monitor manufacturers. Products
require no field adjustments at installation or additional maintenance thereafter.
Diagnostic indicators provide a quick visual indication of system status. Equipment
may be ordered as stand-alone modules or rack cards that are mounted in the
SR-20/2 American Fibertek Card Cage. These units are compatible with the
M30/M33/M33S series of three single-channel rack-mount video transmitters
and receivers.
FEATURES
• For distances up to 24 km (14+ mi.)
• Full-color transmission
• Compatible with NTSC, RS-170A, RS-343A, PAL, CCIR standards
• Smallest profileD available anywhere
• Diagnostic indicators for video, power and optical presence
• Single-mode and multimode versions available
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
8.6
850 NM - 2.0 KM
Anixter No. Vendor No.
258427
MTM-100
258428
RTM-100
258448
RRM-100
258449
MRM-100C
Description
MM transmitter module
MM transmitter rack card
MM receiver rack card
MM receiver module
1300 NM
Anixter No.
258429
258430
258431
258432
258433
258445
258446
258447
Description
MM transmitter rack card 7.0 km
MM transmitter module 7.0 km
SM transmitter module 24.0 km
SM transmitter rack card 24.0 km
SM receiver module 24.0 km
SM receiver rack card 24.0 km
MM receiver rack card 7.0 km
MM receiver module 7.0 km
Vendor No.
RTM-300
MTM-300
MTM-300S
RTM-300S
MRM-300S
RRM-300S
RRM-300
MRM-300
PR21515V2-122445.tif
The American Fibertek 404C/440C/440C-SL Series products transmit four channels of
high-quality video. Designed to be completely transparent to all camera and monitor
manufacturers, these systems require no field adjustments at installation or
additional maintenance thereafter. Diagnostic indicators provide a quick visual
indication of system status. Equipment may be ordered as stand-alone modules or
rack cards that are mounted in the American Fibertek SR-20/2 Card Cage.
FEATURES
• For distances up to 25 km (15+ mi.)
• Real-time video transmission
• Full-color transmission
• Diagnostic indicators for video, power and optical presence
• Compatible with 500 Series audio/data modulators and demodulators
• Compatible with NTSC, RS-170A, RS-343A, PAL, CCIR standards
• Single-mode and multimode versions
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
2.5 KM SYSTEM
Anixter No. Vendor No.
258450
MT-404C
258451
RT-404C
258452
MR-404C
258453
RR-404C
Description
MM transmitter module
MM transmitter rack card
MM receiver module
MM receiver rack card
5.0 KM SYSTEM
Anixter No. Vendor No.
258454
MT-440C
258455
RT-440C
258456
MR-440C
258457
RR-440C
Description
MM transmitter module
MM transmitter rack card
MM receiver module
MM receiver rack card
25 KM SYSTEM
Anixter No. Vendor No.
258458
MT-440C-SL
258459
RT-440C-SL
258460
MR-440C-SL
258461
RR-440C-SL
Description
SM transmitter module
SM transmitter rack card
SM receiver module
SM receiver rack card
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video over Fiber
Video Systems;CCTV/4158
Index1.Networking Systems//Video Products//Video Security Systems
Single-fiber 8-channel Video System
AMERICAN FIBERTEK
PR21513V2-122442.tif
Media Converters;Stand-alone/13230
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
Analog Video CCTV Media Converters
TRANSITION NETWORKS
PR12173V2-492646.tif
Transmitters;Video Transmissions/18717
Index1.Networking Systems//Video Products//Video Security Systems
Video Transmission Kit
INTERLOGIX
PR7935V2-12347.tif
The Interlogix FiberPak Videolinks Kit includes everything you need to transmit a CCTV
signal (either fixed or PTZ) on one multimode optical fiber. FiberPaks are available in
five models compatible with Bosch, Javelin, Kalatel, Pelco, Sensormatic AD, Vicon,
Videolarm and other CCTV manufacturers. The FiberPak Kit includes: transmitter and
receiver; power supplies; installation and operation manuals; lifetime warranty. Note:
Single-mode and rack-mount versions of these products are available separately to
meet your system-configuration needs.
FEATURES
• No in-field adjustments
• Full-range Automatic Gain Control (AGC)
• Automatic resettable fuses on all power lines
• Transparent data encoding/compatible with major data protocols
• Power and AGC status LEDs to monitor system performance
• Wide operating ambient temperature range (-40º to +74ºC)
Anixter No. Vendor No.
Description
243512
FP1101
MM, 850 nm, 1F, fixed video
303850
FP6010
MM, 4-channel video
transmission kit, 1F
Transition Networks' analog composite video media transmitters convert CCTV signals
from cameras to multimode or single-mode fiber for up to 10 km. Transition
Networks' analog video media receiver converts the optical signal back to an analog
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.7
Video Transmission, Media Conversion and Wireless
The American Fibertek 880C/880C-SL Series products transmit eight channels of
high-quality video on one multimode or single-mode optical fiber. Designed to be
completely transparent to all camera and monitor manufacturers. These systems
require no field adjustments at installation or additional maintenance thereafter.
Diagnostic indicators provide a quick visual indication of system status. Equipment
may be mounted as stand-alone modules or rack units by position of the
rack brackets.
FEATURES
• For distances up to 25 km (15+ mi.)
• Equipment has modular or rack-mount selectable mounting brackets
• Real-time video transmission
• Full-color transmission
• Diagnostic indicators for video, power and optical presence
• Compatible with NTSC, RS-170A, RS-343A, PAL, CCIR standards
• Compatible with 500 Series audio/data modulators and demodulators
• Single-mode and multimode versions
• Universal power input (85-264 V AC)
• 1300 nm
Anixter No. Vendor No.
Description
258402
MRT-880C
MM single-fiber transmitter
module/rack 4.0 km
258403
MRR-880C
MM single-fiber receiver module/rack
4.0 km
258405
MRT-880C-SL
SM single-fiber transmitter
module/rack 25 km
258406
MRR-880C-SL
SM single-fiber receiver module/rack
25 km
composite video signal. All conversion is performed in real-time. Automatic gain
control installed on both transmitter and receiver maintains desired quality of video's
contrast and brightness for extended distances. No field adjustments are necessary.
Wide-input-range power supply allows for multiple choices of power source including
camera power supply.
Anixter No. Vendor No.
Description
324798
J/VD-TX-01
Video transmitter, coax BNC to 850 nm,
multimode, ST, 1 km
324801
J/VD-TX-01-SC
Video transmitter, coax BNC to 850 nm,
multimode, SC, 1 km
324804
J/VD-TX-01-SM
Video transmitter, coax BNC to
1310 nm, single-mode, ST, 10 km
324799
J/VD-RX-01
Video receiver, coax BNC to 850 nm,
multimode, ST, 1 km
324802
J/VD-RX-01-SC
Video receiver, coax BNC to 850 nm,
multimode, SC, 1 km
324805
J/VD-RX-01-SM
Video receiver, coax BNC to 1310 nm,
single-mode, ST, 10 km
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Data over Fiber
./Transceivers;Data/17179
Modules;Control/3414
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
ValueLine RS-232/422 Point-to-Point Data Transceiver
Video Transmission, Media Conversion and Wireless
COMNET
Data Transmission
PR28468V2-209151.tif
The ComNet ValueLine FDX50M2 and FDX51M2 data transceivers are interchangeable
by application and provide point-to-point transmission of simplex or duplex EIA
RS-232/RS-422 data signals over two multimode optical fibers. The transceivers are
transparent to data encoding, allowing for broad-range compatibility. Plug-and-play
design ensures ease of installation requiring no electrical or optical adjustments.
Each transceiver incorporates a bi-color (red/green) indicating LED for monitoring
proper system operation. The FDX50 has a small footprint and is designed to be used
where space is a consideration. The FDX51 can be rack- or surface-mounted. ComNet
products are made in the USA, have a lifetime guarantee and are available to
purchase under GSA contract.
FEATURES
• Meets RS-232/422 specifications
• Distances up to 6 km (3.7 miles)
• Transparent toDdata encoding/compatible with major data protocols
• Point-to-point topology
• Meets NEMA TS-1/TS-2 and Caltrans Specifications
• Data rates up to 115 kbps (NRZ)
• Voltage-transient protection on all power and signal input/output lines provides
unconditional protection from power surges and other voltage-transient events
• Bi-color (red/green) transmit and receive LEDs
• NTCIP compatible
• Automatic resettable solid-state current limiters
• FDX50 is a compact-size module for surface mounting
• FDX51 is interchangeable between stand-alone or rack-mount use ComFit
• Lifetime warranty
Anixter No. Vendor No.
Description
420762
FDX50M2
Small size
420764
FDX51M2
Stand-alone or rack-mount
INTERLOGIX
PR7929V2-12329.tif
Interlogix offers a complete line of analog and digital data transmission products for
RS-232; RS-422; and RS-485 (2-wire or 4-wire) serial data. These modules can be
used to design point-to-point, drop-and-repeat and self-healing ring data network
topologies. Wide operating ambient temperature range (-40 to +74C).
RS-232/422 POINT-TO-POINT TRANSCEIVERS
Anixter No. Vendor No.
Description
243547
D1010
MM, 850 nm, 2F
272171
D1010WDMA
MM, 850 nm/1300 nm, 1F (side A)
303702
D1010WDMB
MM, 1300 nm/850 nm 1F (side B)
243548
D1020
MM, 1300 nm, 2F
243549
D1025
SM, 1300 nm, 2F
303704
D1030
SM, 1310 nm, 2F
303706
D1030WDMA
SM, 1300 nm 1F (side A)
303708
D1030WDMB
SM, 1500 nm 1F (side B)
303753
D2300WDM
MM, 850/1300 nm, 1F
303808
D9130WDM-R3
SM, 1300 nm, 1F, rack-mount
RS-232/422 DROP-AND-REPEAT TRANSCEIVERS
Anixter No. Vendor No.
Description
243551
D2100
MM, 850 nm, 2F
303743
D2100WDM
MM, 850/1300 nm, 1F
243552
D2120
MM, 1300 nm, 2F
243553
D2130
SM, 1300 nm, 2F
RS-485 (2-WIRE) POINT-TO-POINT TRANSCEIVERS
Anixter No. Vendor No.
Description
243554
D1300
MM, 850 nm, 2F
243556
D1325
SM, 1300 nm, 2F
RS-485 (2-WIRE) DROP-AND-REPEAT TRANSCEIVERS
Anixter No. Vendor No.
Description
240395
D2300
MM, 850 nm, 2F
303753
D2300WDM
MM, 850/1300 nm, 1F
243558
D2325
SM, 1300 nm, 2F
RS-485 (4-WIRE) POINT-TO-POINT TRANSCEIVERS
Anixter No. Vendor No.
Description
243559
D1315
MM, 850 nm, 2F
303722
D1315WDMA
MM, 850/1300 nm, 1F (side A)
303724
D1315WDMB
MM, 1300/850 nm, 1F (side B)
243560
D1315-SM
SM, 1300 nm, 2F
8.8
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Data over Fiber
RS-485 (4-WIRE) DROP-AND-REPEAT TRANSCEIVERS
Anixter No. Vendor No.
Description
243561
D2315
MM, 850 nm, 2F
243562
D2315-SM
SM, 1300 nm, 2F
303759
D2315WDM
MM, 850/1300 nm, 1F
SELF-HEALING RING DATA TRANSCEIVER (RS-232/422, RS-485, 2- OR 4-WIRE)
Anixter No. Vendor No.
Description
243566
D19130SHR
SM, 1300 nm, 2F
UNIVERSAL DATA TO ETHERNET BI-DIRECTIONAL DATA TRANSCEIVERS
Anixter No. Vendor No.
Description
359509
DED2500-E
Serial to Ethernet media converter,
10/100TX, electrical
359510
DED2500-M
Serial to Ethernet media converter,
100FX MM
359512
DED2500-S
Serial to Ethernet media converter,
100FX SM
Video Systems;Data/11021
Index1.Networking Systems//Video Products//Video Security Systems
S710D Universal Data System
INTERLOGIX
PR14964V2-34016.tif
Multiplexers;Data/15010
Index1.Networking Systems//Video Products//Video Security Systems
Full-duplex Data Multiplexer
INTERLOGIX
PR21459V2-121578.tif
The Interlogix D8000 Series is a fully digital data multiplexer that supports up to eight
channels of full-duplex data on one optical fiber, and is ideal for those applications
where the available fiber count may be limited or additional data channels must be
added to an existing optical cable plant. These environmentally hardened data
multiplexers are designed for use in unconditioned out-of-plant or roadside
installations. Any of the eight available data channels may be independently
configured for either RS-232, RS-422 or RS-485 (2- or 4-wire) operation, providing a
high level of versatility. Plug-and-play design ensures ease of installation and no
electrical or optical adjustments are ever required. LED status indicators are
provided for rapidly ascertaining equipment-operating status, and these units are
available in either stand-alone or rack-mount configurations.
FEATURES
• 8-channel transceivers
• Transparent to data encoding
• Automatic resettable solid-state current limiters
• Data rates up to 115 kbps
• Integrated WDM for greater product reliability
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
The S710D is a member of Interlogix's revolutionary family of multiprotocol data
links. This one link handles all major data formats in both directions, including
SensorNet. It is not necessary to order or stock different models to support different
data formats. They're all in one unit. Configure the S710D as needed for the job, and
even better, if the installation, changes data formats, just reconfigure the S710D.
The use of state-of-the-art digital technology throughout the S710D makes it possible
to build in more diagnostic functions than previously possible.
In addition, the integrity of the data paths can be tested with a built-in data
transmission test-pattern generator. It is not necessary to connect to an external data
device. The S710D also features the very valuable data-translation function that
allows input of one data format and output of a different format.
FEATURES
• All-in-one data: RS-232, RS-422, RS-485 Manchester, Biphase, TTL
• User-configurable data format
• Unique data translation function
• Optical budget 13 dB
• Optical automatic gain control (OAGC)
• Enhanced built-in diagnostics
• MTBF > 100,000 hours
Anixter No. Vendor No.
Description
231564
S710D-RST2
2-fiber link transmits using 850 nm
8.9
Video Transmission, Media Conversion and Wireless
DROP-AND-REPEAT POLL AND RESPOND TRAFFIC SIGNAL NETWORKS
Anixter No. Vendor No.
Description
396385
D19130
SM, 1300 nm, 2F
396386
D19130-R3
SM, 1300 nm, 2F rack-mount
396387
D19130WDM
SM, 1300 nm, 1F
303808
D9130WDM-R3
SM, 1300 nm, 1F, rack-mount
• Tested and certified by an independent testing laboratory for full compliance
with the environmental requirements (ambient operating temperature,
mechanical shock, vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the
Caltrans Specification for Traffic Signal Control Equipment
• Hot-swappable rack modules
• Distances up to 37 miles (60 km)
Anixter No. Vendor No.
Description
303776
D8020WDMA
Multimode, 1 fiber, "A" end
303778
D8020WDMB
Multimode, 1 fiber, "B" end
303782
D8030WDMB
Single-mode, 1 fiber, "A" end
303777
D8020WDMA-R3
Multimode, 1 fiber, "A"
end, rack-mount
303779
D8020WDMB-R3
Multimode, 1 fiber, "B" end rack-mount
303781
D8030WDMA-R3
Single-mode, 1 fiber, "A"
end rack-mount
303783
D8030WDMB-R3
Single-mode, 1 fiber, "B"
end rack-mount
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Data over Fiber
Media Converters;Fiber/11020
Video;Video/3277
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
S712D Universal Data Repeater
Video Transmission, Media Conversion and Wireless
INTERLOGIX
S711D/S7711D Fiber Data Link
PR14965V2-34009.tif
The S712D Universal Data Repeater is part of Interlogix's revolutionary family of
multiprotocol data links. This model series adds four new data functions: (1) It acts
as a repeater to extend the operation distance of an S711D or S712D system; (2) It
provides drop-and-insert capability to a linear data system with up to 32 nodes; (3) It
can be configured as a redundant point-to-point system; (4) It can be configured as a
self-healing ring with up to 32 nodes.
Like the other members of the Universal Data family, this link handles all major data
formats in both directions. It is not necessary to order or stock different models to
support different data formats. The S712D also features the very valuable data
translation function that allows input of one data format and output of a
different format.
The S712D has extensive built-in diagnostics, including a self-test data generator that
makes it possible to test a link without having to connect external data equipment.
D
FEATURES
• All-in-one data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL
• Field-configurable data format
• Drop-and-insert repeater function
• Self-healing ring capability
• Redundant point-to-point capability
• Unique data translation function
• Standard optical budget 18 dB; higher budgets available
Anixter No. Vendor No.
Description
231565
S712D-EST2
850 and 1300 nm
8.10
INTERLOGIX
PR14970V2-33971.tif
The S711D multimode link and S7711D single-mode link handle all major data
formats in both directions, including SensorNet. It is not necessary to order or stock
different models to support different data formats. If an installation changes data
formats, simply reconfigure the S711D or S7711D. The use of state-of-the-art digital
technology throughout the S711D and S7711D includes the unique SMARTS
technology, providing more diagnostic functions than previously possible. In addition,
the integrity of the data paths can be tested with a built-in data transmission
test-pattern generator. It is not necessary to hook up a data source to test the link.
The S711D and S7711D also feature the very valuable data-translation function that
allows input of one data format and output of a different format.
FEATURES
• Multiprotocol data: RS-232, RS-422, RS-485
• Manchester, Biphase, TTL, SensorNet
• User-configurable data format
• Unique data translation function
• SMARTS diagnostics
• Optical budget 18 dB
• Hot-swappable
• Solid-state circuit protection
• Forever Warranty
Anixter No. Vendor No.
Description
342211
S711DT-EST1
Multimode, 1-fiber link, 850/
1300 nm, transmitter
273603
S711DR-EST1
Multimode, 1-fiber link, 850/
1300 nm, receiver
342212
S7711DT-EST1
Single-mode, 1-fiber link, 1310/
1550 nm, transmitter
273606
S7711DR-EST1
Single-mode, 1-fiber link, 1310/
1550 nm, receiver
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video and Data over Fiber
./Multiplexers;Multiplexers/18716
Multiplexers;Ethernet/17180
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Video Multiplexer
INTERLOGIX
PR7939V2-12356.tif
ValueLine 4- and 8-channel Digitally Encoded Video Multiplexers
With and Without Data
COMNET
PR28469V2-209137.tif
PR92192V2-728951.tif
4-CHANNEL DIGITAL MULTIPLEXER, SM WITH 2 BI-DIRECTIONAL DATA VIA RS-232,
RS-422, RS-485, 2- OR 4-WIRE
Anixter No. Vendor No.
Description
279049
VR7420-2DRDT
MM, receiver
279048
VT7420-2DRDT
MM, transmitter
270738
VR7430-2DRDT
SM, receiver
271961
VT7430-2DRDT
SM, transmitter
8-CHANNEL DIGITAL MULTIPLEXER, SM, 2 BI-DIRECTIONAL DATA VIA RS-232,
RS-422, RS-485, 2- OR 4-WIRE
Anixter No. Vendor No.
Description
304119
VT7820-2DRDT
MM, transmitter
304025
VR7820-2DRDT
MM, receiver
243539
VT7830-2DRDT
SM, transmitter
243540
VR7830-2DRDT
SM, receiver
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
4-CHANNEL
Anixter No.
394007
394008
420765
Vendor No.
FVT41M1
FVR41M1
FVT412M1
420766
FVR412M1
8-CHANNEL
Anixter No.
420767
420769
420770
Vendor No.
FVT81M1
FVR81M1
FVT812M1
420771
FVR812M1
Description
4-channel video transmitter
4-channel video receiver
4-channel video transmitter with two
bi-directional data channels
4-channel video receiver with two
bi-directional data channels
Description
8-channel video transmitter
8-channel video receiver
8-channel video transmitter with two
bi-directional data channels
8-channel video receiver with two
bi-directional data channels
8.11
Video Transmission, Media Conversion and Wireless
Interlogix offers a complete line of analog and digital video multiplexers - from two
channels to 32 channels of video. In addition, they provide a multitude of
multiplexers that combine video/data and video/audio.
Options: PS-12VDC 12-volt DC plug-in power supply (included).
PS-12VDC-230 12 volt DC plug-in power supply, 230 V AC input (included if specified
at time of order). Add '-R3' to model number for R3 Rack-Mount - no charge. (Requires
R3 rack purchased separately, as found in the accessories section) Add 'C' for
conformal coated printed circuit boards. Consult your salesperson.
FEATURES
• Choice of analog FM or digital transmission
• 10 MHz bandwidth per channel
• No in-field adjustments
• Power and signal status LEDs to monitor system performance
• Real-time color transmission
• Wide operating ambient temperature range (-40 to 74C)
The ComNet ValueLine video multiplexer units simultaneously transmit and receive
four channels (FVT41M1/FVR41M1) or eight channels (FVT81M1/FVR81M1) of video
over one optical fiber utilizing digital encoding for quality video transmission. This
line consists of models with and without two channels of RS-232, RS-422 and
RS-485 data (FVT412M1/FVR412M1, FVT812M1/FVR812M1). These hardened units
are ideal for use in unconditioned installations. These units are completely
transparent to and universally compatible with any NTSC, PAL or SECAM CCTV camera
systems. ComNet products are made in the USA, have a lifetime guarantee and are
available to purchase under GSA contract.
FEATURES
• Compatible with all NTSC, PAL or SECAM CCTV camera systems
• Interchangeable between rack and stand-alone mounting
• NTCIP compatible
• Environmentally hardened
• Voltage-transient protection on all power and signal input/output lines
• Bi-color (red/green) LED status indicators
• Automatic resettable solid-state current limiters
• Lifetime warranty
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video and Data over Fiber
Switches;Ethernet/17176
Index1.Networking Systems//Video Products//Video Security Systems
ComPak Fiber Optic and Ethernet Transmission Products
Video Transmission, Media Conversion and Wireless
COMNET
PR28466V2-209157.tif
The ComNet ComPak Convenience packs are a convenient pairing of a transmitter and
receiver plus power supplies in one package with a single model number. ComNet
identified the most in-demand products and is offering them in a cost-saving
package available through distribution. ComNet products are made in the USA, have a
lifetime guarantee and are available to purchase under GSA contract.
Anixter No. Vendor No.
Description
393988
COMPAK11M
Mini video transmitter/AGC mini
video receiver
420739
COMPAK1031M1
Video with bi-directional data
transmitter and receiver
420741
COMPAK41M1
4-channel video transmitter
and receiver
420744
COMPAK412M1
4-channel video with two bi-directional
D
data channels, transmitter and receiver
420747
COMPAK81M1
8-channel video, transmitter
and receiver
420750
COMPAK812M1
8-channel video with two bi-directional
data channels, transmitter and receiver
420751
COMPAK1002MAC1M 10/100 Mbps Ethernet 2-port
media converter
420753
COMPAK-EOC
Ethernet over twisted-pair or coaxial
cable using VDSL2 (EoVDSL)
receiver/driver to the control center. The unique Multiprotocol Data design accepts all
major data formats, including SensorNet. The S734DV also features the very valuable
data-translation function that allows input of one data format and output of a
different format. Four relay/contact closure channels in the forward direction permit
transmission of switch closures. SMARTS diagnostic technology provides an extensive
array of diagnostic LEDs and onscreen monitor displays.
FEATURES
• Four channels of one-way video
• 10-bit digital encoding
• 500 TV lines resolution
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase,
TTL, SensorNet
• User-configurable data format
• Unique data translation function
• Relay/contact closures - four forward channels
• SMARTS diagnostics
• 24 V AC/13.5 V DC transmitter power
Anixter No. Vendor No.
Description
342209
S734DVT-EST1
Multimode, 1-fiber link, 850/
1300 nm, transmitter
273582
S734DVR-EST1
Multimode, 1-fiber link, 850/
1300 nm, receiver
342210
S7734DVT-EST1
Single-mode, 1-fiber link, 1310/
1550 nm, transmitter
273583
S7734DVR-EST1
Single-mode, 1-fiber link, 1310/
1550 nm, receiver
Data Systems;Fiber/11025
Index1.Networking Systems//Video Products//Video Security Systems
S739DV Video with Universal Up-the-Coax Control,
Response and Genlock
INTERLOGIX
PR14967V2-33999.tif
Modules;Video/3016
Index1.Networking Systems//Video Products//Video Security Systems
S734DV/S7734DV 4-channel Video and 2-way Universal
Data Fiber Module
INTERLOGIX
PR14966V2-34012.tif
The S734DV and S7734DV Video Multiplexers provide four channels of video
transmission combined with two-way universal data. The S734DV and S7734DV
convert four channels of analog baseband composite video to digital format for
transmission over fiber. Digital transmission of the video assures clean, noise-free
video at the receiver. Two-way data permits remote control of a PTZ response from the
8.12
The S739DV Video and Control Data System represents a major advance in fiber optic
links for Up-the-Coax control systems. In Up-the-Coax systems, video is transmitted
from the camera back to the control center over coaxial cable, and control signals to
operate the pan/tilt/zoom (PTZ) functions are transmitted from the control station out
to the receiver/driver at the camera station. In addition to video and control, the
S739DV provides for the transmission of response signals from the camera station to
the control station. The S739DV also provides for transmission of embedded genlock
sync if genlocking is a feature of the particular control system used. The S739DV
works with all major brands of Up-the-Coax systems. The S739DV also features more
extensive LED diagnostics than ever before, with input/output indicators for video,
command, response, genlock sync and optical signal strength.
FEATURES
• Transmits video, control, response and embedded genlock signals
• One- or two-fiber links available
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video and Data over Fiber
• Compatible with all major Up-the-Coax control systems, including: American
Dynamics, Baxall, Burle, Elbex, Pelco, Robot, Sensormatic, VCS format, Vicon,
Videolarm and others
• Diagnostic LEDs for video, command, response, sync and optical signals on both
Tx and Rx
• Operating distances up to 11 miles/18 km (control system specific)
• Built-in optical automatic gain control (OAGC)
• Modern, heavy-duty housing design
Anixter No. Vendor No.
Description
231572
S739DVT-EST1
Transmitter
231574
S739DVR-EST1
Receiver
Modules;Video/3275
Index1.Networking Systems//Video Products//Video Security Systems
INTERLOGIX
The S731DV/S7731DV Fiber Video and Data Link provides digital transmission of
video and return multiprotocol data. The link converts analog baseband composite
video to 8-bit digital format for transmission over fiber. The S731DV and S7731DV
support all major video formats. Return data permits remote control of a PTZ at the
camera station. The unique multiprotocol data design accepts all major data formats.
This allows the S731DV/S7731DV to be retained if there is a change of video-control
systems. The unit also features the very valuable data-translation function that
allows input of one data format and output of a different format. Relay/contact
closure is supported from the camera station to the control station. SMARTS
diagnostic technology provides extensive built-in system diagnostic tools, including
diagnostic LEDs and onscreen monitors.
FEATURES
• 8-bit digital video transmission
• 520 TV lines resolution
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL and
DTMF/FSK control signals
• SMARTS diagnostics
• 24 V AC/13.5 V DC transmitter power
• Unique data translation function
• User-configurable data format
• Relay/contact closure
MULTIMODE
Anixter No.
273590
342213
273592
342215
Vendor No.
S731DVT-EST1
S731DVR-EST1
S731DVT-EST2
S731DVR-EST2
SINGLE-MODE
Anixter No. Vendor No.
273594
S7731DVT-EST1
342214
273595
342217
S7731DVR-EST1
S7731DVT-EST2
S7731DVR-EST2
Index1.Networking Systems//Video Products//Video Security Systems
S732DV/S7732DV Video and Multiprotocol Data Fiber Link
INTERLOGIX
The S732DV/S7732DV fiber link converts analog video to digital video and supports
two-way transmission of all major data formats. It is not necessary to order or stock
different models to support different data formats. Digital transmission of the video
component along with a signal-to-noise ratio of >55 dB assures clean, noise-free
video at the receiver. Moreover, this link supports all major video formats. The data
functions include the unique data-translation feature, which allows one data format
to be input and a different data format to be output. Interlogix's unique SMARTS
diagnostic technology provides an extensive set of built-in diagnostic tools including
a video test-pattern generator that allows failures to be diagnosed from the monitor.
FEATURES
• 8-bit digital video transmission
• 520 TV lines resolution
• SMARTS diagnostics
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL,
SensorNet and DTMF/FSK control signals
• Unique data translation function
• User-configurable data format
MULTIMODE
Anixter No.
273585
342219
273586
342220
Vendor No.
S732DVT-EST1
S732DVR-EST1
S732DVT-EST2
S732DVR-EST2
SINGLE-MODE
Anixter No. Vendor No.
342224
S7732DVT-EST1
342225
273588
342222
S7732DVR-EST1
S7732DVT-EST2
S7732DVR-EST2
Description
1-fiber link, 850/1300 nm, transmitter
1-fiber link, 850/1300 nm, receiver
2-fiber link, 850 nm, transmitter
2-fiber link, 850 nm, receiver
Description
1-fiber link, 1310/
1550 nm, transmitter
1-fiber link, 1310/1550 nm, receiver
2-fiber link, 1310 nm, transmitter
2-fiber link, 1310 nm, receiver
Description
1-fiber link, 850/1300 nm, transmitter
1-fiber link, 850/1300 nm, receiver
2-fiber link, 850 nm, transmitter
2-fiber link, 850 nm, receiver
Description
1-fiber link, 1310/
1550 nm, transmitter
1-fiber link, 1310/1550 nm, receiver
2-fiber link, 1310 nm, transmitter
2-fiber link, 1310 nm, receiver
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.13
Video Transmission, Media Conversion and Wireless
S731DV/S7731DV Fiber Video and Data Link
Modules;Video/3274
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video and Data over Fiber
Transmitters;Video/3415
Index1.Networking Systems//Video Products//Video Security Systems
Video Transmission Kit
Video Transmission, Media Conversion and Wireless
INTERLOGIX
PR7935V2-12347.tif
The Interlogix FiberPak Videolinks Kit includes everything you need to transmit a CCTV
signal (either fixed or PTZ) on one multimode optical fiber. FiberPaks are available in
five models compatible with Bosch, Javelin, Kalatel, Pelco, Sensormatic AD, Vicon,
Videolarm and other CCTV manufacturers.
The FiberPak Kit includes: transmitter and receiver; power supplies; installation and
operation manuals; lifetime warranty.
Note: Single-mode and rack-mount versions of these products are available separately
to meet your system-configuration needs.
FEATURES
• No in-field adjustments
• Full-range Automatic Gain Control (AGC)
• Automatic resettable fuses on all power lines
• Transparent data
D encoding/compatible with major data protocols
• Power and AGC status LEDs to monitor system performance
• Wide operating ambient temperature range (-40 to +74C)
Anixter No. Vendor No.
Description
240399
FP1500WDM
MM, 850/1300 nm, 1F, video with
one-way data
243513
FP1505WDM
MM, 850/1300 nm, 1F, video with
up-the-coax data
243514
FP1910WDM
MM, 850/1300 nm, 1F, video with
bi-directional data
FEATURES
• For distances up to 25 km (15+ mi.), consult AFI
• Real-time video transmission
• Full-color transmission
• Diagnostic indicators for video, power and optical presence
• Compatible with NTSC, RS-170A, RS-343A, AL, CCIR standards
• Compatible with Baxall, Betatech, Molynx, Pelco, Philips, Sensormatic,
Synectics, Vicon and other control suppliers
• Single-mode and multimode versions
• Equipment has modular or rack-mount selectable mounting brackets
• Universal power input (85-264 V AC)
• Includes 5.0 km system
4-CHANNEL
Anixter No.
258390
258391
258392
258393
Vendor No.
MTX-8423C
MRX-8423C
MTX-8485C
MRX-8485C
Description
Transmitter Manchester code
Receiver Manchester code
Transmitter RS-422 code
Receiver RS-422 code
8-CHANNEL
Anixter No.
258394
258395
258396
258397
Vendor No.
MRX-8823C
MTX-8823C
MTX-8885C
MRX-8885C
Description
Receiver Manchester code
Transmitter Manchester code
Transmitter RS-422 code
Receiver RS-422 code
Video Systems;CCTV/15258
Index1.Networking Systems//Video Products//Video Security Systems
Single-fiber - 10-bit Digital - 4-channel Video System
AMERICAN FIBERTEK
PR21891V2-126568.tif
Video Systems;CCTV/4156
Index1.Networking Systems//Video Products//Video Security Systems
Single-fiber Video System With Bi-directional Data
AMERICAN FIBERTEK
PR21514V2-122435.tif
The American Fibertek 8000 Series products transmit four to eight channels of
high-quality video with an additional channel of bi-directional data on one single
multimode optical fiber. Designed to be completely transparent to all camera and
monitor manufacturers, this system requires no field adjustments at installation or
additional maintenance thereafter. Diagnostic indicators provide a quick visual
indication of system status. Equipment may be mounted as stand-alone modules or
rack units by the position of the mounting brackets.
8.14
The American Fibertek 946 Series transmits four channels of high-quality, 10-bit
digitized video along with one channel of bi-directional data and one channel of
bi-directional contact closure on one multimode optical fiber. The 946SL Series
transmits four channels of high-quality, 10-bit digitized video along with one channel
of bi-directional data and one channel of bi-directional contact closure on one
single-mode optical fiber. Available data formats are switch selectable and include:
RS-485 (2- or 4-wire), RS-422, RS-232, and Manchester/Bosch protocol data.
Designed to be completely transparent to all camera and monitor manufacturers, the
system requires no field adjustments at installation or additional maintenance
thereafter. Diagnostic indicators provide a quick visual indication of system status.
Equipment may be ordered as stand-alone modules or rack cards that are mounted in
SR-20D/2 or SR-20R/1 AFI Card Cages.
FEATURES
• Diagnostic indications (LEDs): video, DC power, data activity, digital frame sync
and optical presence
• Full-color, real-time video transmission
• Serial digital transmission
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video and Data over Fiber
• Compatible with NTSC; RS-170A, RS-343A, PAL and SECAM
• Data formats: RS-485/RS-422, RS-232. One channel of bi-directional data
• One channel of bi-directional contact closure
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
WITH RS-422
Anixter No.
258409
258410
258423
258424
Vendor No.
MTM-1400
RTM-1400
RRM-1400
MRM-1400
Description
MM video transmitter module
MM video transmitter rack card
MM video receiver rack card
MM video receiver module
Vendor No.
MT-946
RT-946
MR-946
RR-946
Description
Stand-alone transmitter, 2 km
Rack-card transmitter, 2 km
Stand-alone receiver
Rack-card receiver
SINGLE-MODE
Anixter No.
370803
370805
370807
370808
WITH RS-485
Anixter No.
258411
258412
258421
258422
Vendor No.
MTM-1485
RTM-1485
RRM-1485
MRM-1485
Description
MM video transmitter module
MM video transmitter rack card
MM video receiver rack card
MM video receiver module
Vendor No.
MT-946SL
RT-946SL
MR-946SL
RR-946SL
Description
Stand-alone transmitter, 40 km
Rack-card transmitter, 40 km
Stand-alone receiver
Rack-card receiver
WITH UP-THE-COAX CODE
Anixter No. Vendor No.
339166
MTM-1605
339167
RTM-1605
339172
RRM-1605
339173
MRM-1605
Description
MM video transmitter module
MM video transmitter rack card
MM video receiver rack card
MM video receiver module
Transceivers;CCTV/4159
Index1.Networking Systems//Video Products//Video Security Systems
Single-fiber Bi-directional Transceivers - Low Profile
PR21512V2-122447.tif
The American Fibertek
1000 Series products transmit a
single channel of high-quality
video with an additional channel
of bi-directional data on one
single multimode optical fiber.
Designed to be completely
transparent to all camera and
monitor manufacturers, this
system requires no field
adjustments at installation or additional maintenance thereafter. Diagnostic
indicators provide a quick visual indication of system status. Equipment may be
mounted as stand-alone modules or rack units in the RS-20/2 American Fibertek
Card Cage.
FEATURES
• For distances up to 3 km (1.8 mi.)
• Full-color transmission
• Smallest profile available anywhere
• Compatible with Ademco Video, Baxall, Betatech, Molynx, Pelco, Philips,
Sensormatic, Synectics, Vicon and other control suppliers
• Compatible with NTSC, RS-170A, RS-343A, PAL, CCIR standards
• Single-mode and multimode versions
• Available as stand-alone modules or in rack-card configurations for use with the
American Fibertek SR-20/2 19 in. rack
• Includes 2.5 km system
WITH MANCHESTER CODE
Anixter No. Vendor No.
258407
MTM-1200B
258408
RTM-1200B
258425
RRM-1200B
258426
MRM-1200B
Transmission Systems;Rack/15263
Index1.Networking Systems//Video Products//Video Security Systems
Fiber Equipment Subrack System - Diagnostic Capable
AMERICAN FIBERTEK
AMERICAN FIBERTEK
PR21890V2-126572.tif
The American Fibertek SR-20D/2 Series Fiber Equipment Subrack is a system that can
be configured with any combination of AFI products, including transmitters, receivers
or transceivers.
FEATURES
• Built-in AFI diagnostic capability
• Rear power bus to all plug-in cards
• 19 in. EIA rack-frame compatible
• 100 watt DC power supply included
• Up to 14 rack-card spaces
• Blank space slot cards for one, two or four space slots available
• Universal power input: 100 to 240 V AC at 47 to 63 Hz, 100 watts maximum
Anixter No. Vendor No.
Description
370809
SR-20D/2
Fiber optic subrack system
Description
MM video transmitter module
MM video transmitter rack card
MM video receiver rack card
MM video receiver module
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.15
Video Transmission, Media Conversion and Wireless
MULTIMODE
Anixter No.
370795
370796
370799
370802
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video, Data and Audio over Fiber
./Modules;Audio/11019
Modules;Transmission/3014
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Video Transmission, Media Conversion and Wireless
S768DAV Two-way Video, Audio and Data
INTERLOGIX
The links that compise this group offer the user the most versatile choice of
combinations. In each instance these systems support two-way transmission of
high-quality video, audio and data. RS-232, RS-422, TTL or contact closure/relay
control data may be specified as all of these formats are supported. The option of
two-fiber transmission provides broadcast-grade video in both directions. The
S768AV series is an ideal choice for both teleconferencing and camera systems
requiring two-way audio and data in addition to video.
FEATURES
• Two-way transmission over one fiber
• Video bandwidth 10 Hz to 8 MHz
• Audio bandwidth 20 Hz to 20 kHz
• Supports RS-232, RS-422, TTL or relay/contact closure data formats
• Differential gain 1.5 percent and phase 1.5 percent
• Data rate: 19.2 kbps
• THD < 1 percent; audio SNR 56 dB; video SNR 55 dB
• Balanced or unbalanced 600 ohm audio
• Optical AGC circuitry
• Diagnostic indicators: Level/Loss, audio, data and video
• Rack cards or stand-alone units
Anixter No. Vendor No.
Description
220508
245B-T
Audio and data transmitter
220509
245B-R
Audio and data receiver
D
S764DAV/S7764DAV One-way Video, Two-way Digital Audio, 2-channel
Data, 2-channel Contact Closure Fiber Module
INTERLOGIX
PR14974V2-33994.tif
The S764DAV/S7764DAV fiber link provides one-way digital video transmission
combined with two-way 2-channel digital audio, 2-channel multiprotocol data and
2-channel contact closures. Digital processing of the video signal along with a video
signal-to-noise ratio of >60 dB assures clean, noise-free video at the receiver.
Digital processing of the audio signal along with an audio signal-to-noise ratio of
>90 dB allows the audio output to drive balanced or unbalanced loads and
maintain constant audio levels. The data functions include the unique
data-translation feature, which allows one data format to be input and a different
data format to be output. Interlogix's unique SMARTS diagnostic technology provides
an extensive set of built-in diagnostic tools including a video test-pattern generator
that allows failures to be diagnosed from the monitor, and LED displays for
monitoring video, data, audio, contact and optical signal.
FEATURES
• One-way video and two-way audio/data transmission over one or two fibers
• 9-bit A/D video processing, 24-bit A/D audio processing
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL
and SensorNet
• Unique data translation function
• Local or remote user-configurable data format
MULTIMODE
Anixter No.
273573
342226
273574
342227
Vendor No.
S764DAVT-RST1
S764DAVR-RST1
S764DAVT-RST2L
S764DAVR-RST2L
SINGLE-MODE
Anixter No. Vendor No.
273575
S7764DAVT-RST1
342228
273576
342229
8.16
S7764DAVR-RST1
S7764DAVT-RST2
S7764DAVR-RST2
Description
1-fiber link, 850/1300 nm, transmitter
1-fiber link, 850/1300 nm, receiver
2-fiber link, 1310 nm, transmitter
2-fiber link, 1310 nm, receiver
Description
1-fiber link, 1310/
1550 nm, transmitter
1-fiber link, 1310/1550 nm, receiver
2-fiber link, 1310 nm, transmitter
2-fiber link, 1310 nm, receiver
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Analog Video, Data and Audio over Fiber
Modules;Fiber/3015
Index1.Networking Systems//Video Products//Video Security Systems
S751DA/S7751DA Two-way Audio, Multiprotocol Data and
Contact Closure Fiber Module
INTERLOGIX
PR14975V2-33985.tif
Video Transmission, Media Conversion and Wireless
The S751DA/S7751DA fiber link provides two-way transmission of high-quality audio
(HQA), multiprotocol data (MPD) and contact closure. Digital processing of the audio
signal along with an audio signal-to-noise ratio of >90 dB allows the audio output
to drive balanced or unbalanced loads and maintain constant audio levels. The data
functions include the unique data-translation feature, which allows one data format
to be input and a different data format to be output. Interlogix's unique SMARTS
diagnostic technology provides an extensive set of built-in diagnostic LEDs for
monitoring audio, optical signal and data.
FEATURES
• Two-way transmission over one or two fibers
• 24-bit A/D audio processing
• Multiprotocol data: RS-232, RS-422, RS-485, Manchester, Biphase, TTL
and SensorNet
• Local or remote user-configurable data format
• Relay/contact closure - one duplex channel closure
MULTIMODE
Anixter No.
273578
342340
273579
342341
273580
Vendor No.
S751DAT-RST1
S751DAR-RST1
S751DAT-RST2L
S751DAR-RST2L
S7751DAT-RST1
342343
S7751DAR-RST1
SINGLE-MODE
Anixter No. Vendor No.
273580
S7751DAT-RST1
342343
S7751DAR-RST1
Description
1-fiber link, 850/1310 nm, transmitter
1-fiber link, 850/1310 nm, receiver
2-fiber link, 1310 nm, transmitter
2-fiber link, 1310 nm, receiver
1-fiber link, 1310/
1550 nm, transmitter
1-fiber link, 1310/1550 nm, receiver
Description
1-fiber link, 1310/
1550 nm, transmitter
1-fiber link, 1310/1550 nm, receiver
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.17
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Audio over Fiber (Including Voice/POTS)
./Modules;Transmission/3416
Modules;Audio/3410
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Telephony Transmission
Video Transmission, Media Conversion and Wireless
INTERLOGIX
Audio Transmission
PR14891V2-31949.tif
The TT3000 Series touch-tone telephone digital interface provides extended
transmission of analog POTS (plain old telephone service) and 24 volt PBX (private
branch exchange) systems over one or two fiber optic fibers using the latest in digital
transmission technology. The modules also support many enhanced telephone
services offered by telephone providers, such as Caller ID, call waiting and three-way
calling. Use to make emergency phones fiber ready.
FEATURES
• Full FM or digital design
• 10 Mhz bandwidth per channel
• No in-field adjustments
• Wide operating ambient temperature range (-40 to +74C)
• Note: Add '-R3' to model number for rack-mounting
• Requires R3 rack, purchased separately
D
Anixter No. Vendor No.
Description
341458
TT3020WDM
MM, transmitter, 850 nm, 1F
INTERLOGIX
PR7928V2-12326.tif
Interlogix offers a complete line of analog and digital audio-transmission products
for line-level applications with balanced and/or unbalanced configurations. Modules
are available for point-to-point and repeater topologies. Specialized units for
intercom, emergency broadcast, videoconferencing/distance learning and
multimedia applications are also available.
Note: Add '-R3' to model number for rack-mounting. Requires R3 rack,
purchased separately.
FEATURES
• Full FM or digital design
• 10 MHz bandwidth per channel
• No in-field adjustments
• Wide operating ambient temperature range (-40 to +74C)
POINT-TO-POINT AUDIO TRANSMITTERS AND RECEIVERS
Anixter No. Vendor No.
Description
240397
AT1000
MM, transmitter, 850 nm
243570
AT1025
SM, transmitter, 1300 nm
240398
AR1000
MM, receiver, 850 nm
243572
AR1030
SM/MM, receiver, 1300 nm
AUDIO REPEATER
Anixter No. Vendor No.
243575
A2120
243576
A2125
Description
MM, 1300 nm, 2F
SM, 1300 nm, 2F
DIGITAL 4-CHANNEL AUDIO MULTIPLEXER
Anixter No. Vendor No.
Description
303697
AT7430
SM, transmitter, 850 nm
303688
AR7430
SM, receiver, 850 nm
AIPHONE VIDEO INTERCOM SYSTEM
Anixter No. Vendor No.
243578
VIC5211M
243579
VIC5211R
Description
MM, master, 1F
MM, remote, 1F
BI-DIRECTIONAL VIDEO, AUDIO AND DATA TRANSCEIVER
Anixter No. Vendor No.
Description
243580
VAD7010WDMA
MM, 1300/850 nm, 1F
243581
VAD7010WDMB
MM, 850/1300 nm, 1F
TELEPHONE INTERFACE
Anixter No. Vendor No.
341458
TT3020WDM
8.18
Description
MM, transmitter, 850 nm, 1F
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
./Media Converters;Ethernet/17184
Media Converters;Fiber/17944
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
ValueLine CNFE1MCM(M)(S) Media Converter
COMNET
PR29233V2-216356.tif
10/100 Mbps Ethernet 2-port Media Converter Electrical to
SC/ST Optical with Power over Ethernet
COMNET
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
The ComNet CWFE1003POE-M and CWFE1005POE-M 2-port media converters provide
full-duplex fiber optic transmission of a single channel of 10/100 Mbps Ethernet data
(10/100BASE-TX) through multimode or single-mode optical fiber. Type SC or ST
optical connectors are available. These converters exceed the requirements of the
latest PoE standard (IEEE 802.3at). They provide full compliance as Power Sourcing
Equipment (PSE), with a maximum power availability of 30 watts in Mode A or Mode
B, making them ideal for those applications where the remote equipment draws
significant power. The Ethernet electrical interface auto-negotiates to either 10 or
100 Mbps without the need for any user selection, and the optical interface operates
at 100 Mbps (100FX). Packaged in a rugged, compact-size housing. LED indicators
confirm operating status. A power supply providing 48 V DC at 1.5 A is provided with
each converter. ComNet products are made in the USA, and are available to purchase
under GSA contract.
FEATURES
• Exceeds the latest PoE standard (IEEE 802.3at) for Power Sourcing Equipment
(PSE): Provides 30 watts in two modes at 48 V DC, for high-output-demand
applications of remote Ethernet equipment
• 60 watt higher output version available (CWFE100XPOEHO Series)
• SC or ST optical connectors available
• Five-year warranty
Anixter No. Vendor No.
Description
448466
CWFE1003POEM-M
With PoE–SC–MM
448467
CWFE1003POES-M
With PoE–SC–SM
448468
CWFE1005POEM-M
With PoE–ST–MM
448469
CWFE1005POES-M
With PoE–ST–SM
8.19
Video Transmission, Media Conversion and Wireless
The ComNet CNFE1MCM Mini Series Ethernet 2-port commercial-grade media
converter is designed to transmit and receive 10/100 Mbps data over one multimode
or single-mode optical fiber. The CNFE1MCM electrical interface will auto-negotiate to
a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface
operates at a 100 Mbps Ethernet rate. ComNet products are made in the USA, have a
lifetime guarantee and are available to purchase under GSA contract.
FEATURES
• 10/100BASE-T/TX electrical port
• 100BASE-FX optical port
• Designed for installation in benign (0º to +60º C) operating environments
• Electrical port supports auto-negotiation for 10 Mbps or 100 Mbps, full-duplex
or half-duplex data
• Optical port supports 100 Mbps full-duplex data
• Automatic MDI/MDI-X crossover
• Distances up to: 3 km (2 miles) multimode; 45 km (28 miles) single-mode
• Transparent to data encoding/compatible with major data protocols
• Designed to meet full compliance with the environmental requirements of NEMA
TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
• ST optical connectors standard
• Voltage-transient protection on all power and signal input/output lines
• LED indicators
• IEEE 802.3 compliant
• Lifetime warranty
Anixter No. Vendor No.
Description
420727
CNFE1MCM A
ValueLine 10/100 Mbps Ethernet
media converter
420728
CNFE1MCM B
ValueLine 10/100 Mbps Ethernet
media converter
PR34801V2-262087.tif
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Anixter No. Vendor No.
284663
CETTF1027-105
Media Converters;Chassis, Modules/16269
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
Point System Modular Media Converters
Video Transmission, Media Conversion and Wireless
TRANSITION NETWORKS
PR9945V2-492885.tif
The Point System is a cost-effective, fully configurable, managed modular
media-conversion platform that provides users with the flexibility to build their own
custom media-conversion system. The system includes a rack-mountable chassis and
modular, hot-swappable, slide-in media-converter cards. Converters supporting
various communications protocols can be used in the same chassis and provide
managed media-conversion services to suit a custom network application. Chassis
are available in either AC or DC power versions. Transition's SNMP management
application, Focal Point 2.0, is included free of charge with each chassis and each
management module. Combining media conversion with copper-based equipment can
save up to 45 percent in cost. The Point System's modular design allows users to add
converters as they need to add fiber to their network. Therefore, users can utilize
their existing copper-based equipment and not buy fixed multiport fiber devices.
FEATURES
• Cost savings D
• Flexibility
• Maximum control
• Reliability
• Potential for future growth
POINT SYSTEM CHASSIS AND ACCESSORIES
Anixter No. Vendor No.
Description
269844
CPSMC0800-100
8-slot Point System chassis
249803
CPSMC1300-100
13-slot Point System chassis
249729
CPSMC1900-100
19-slot Point System chassis
231557
CPSMC0100-200
Single-slot Point System chassis
249804
CPSMC0200-200
Dual-slot Point System chassis
251332
CPSMP-120
Redundant power supply, 120/240 V AC
for CPSMC1300-100
284293
CPSMP-180
Redundant power supply, 120/240 V AC
for CPSMC0800-100
249802
CPSMM-120
Single-slot primary
management module
227237
CPSFP-200
Faceplate for use on all empty slots
249734
CPSLD-100
LED power status panel for the 19- or
8-slot Point System chassis
ETHERNET SLIDE-IN CONVERTER MODULES ZA-32/62CL
Anixter No. Vendor No.
Description
251345
CETTF1013-105
10BASE-T RJ45 to 10BASE-FL, 850 nm,
multimode, SC, 2 km
251344
CETTF1011-105
10BASE-T RJ45 to 10BASE-FL, 850 nm,
multimode, ST, 2 km
8.20
231621
CETTF1012-105
284661
CETTF1022-105
Description
10BASE-T RJ45 to 10BASE-FL, 1300 nm,
multimode, ST, 5 km
10BASE-T RJ45 to 10BASE-FL, 1310 nm,
single-mode, ST, 20 km
10BASE-T RJ45 to 10BASE-FL, 1310 nm,
single-mode, ST, 40 km
DUAL-STRAND FAST ETHERNET CONVERTER MODULES - 100BASE-TX
RJ45 TO 100BASE-FX
Anixter No. Vendor No.
Description
391000
CFETF1011-205
1300 nm, multimode, ST, 2 km
277828
CFETF1013-205
1300 nm, multimode, SC, 2 km
433922
CFETF1039-205
1300 nm, multimode, LC, 2 km
260653
CFETF1014-205
1310 nm, single-mode, SC, 20 km
SINGLE-STRAND FAST ETHERNET CONVERTER MODULES
Anixter No. Vendor No.
Description
269852
CFETF1029-205
100BASE-TX RJ45 to 100BASE-FX,
1310 nm TX/1550 nm RX, single-fiber,
single-mode, SC, 20 km
269856
CFETF1029-206
100BASE-TX RJ45 to 100BASE-FX,
1550 nm TX/1310 nm RX, single-fiber,
single-mode, SC, 20 km
GIGABIT ETHERNET SLIDE-IN CONVERTER MODULES
Anixter No. Vendor No.
Description
332151
CGETF1013-110
1000BASE-T RJ45 to 1000BASE-SX,
850 nm, multimode SC, 220 m
332152
CGETF1014-110
1000BASE-T RJ45 to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
332153
CGETF1024-110
1000BASE-T RJ45 to 1000BASE-SX,
1300 nm extended, multimode, SC
2 km
10/100/1000 MEDIA CONVERTER MODULES
Anixter No. Vendor No.
Description
373778
CGFEB1013-120
10/100/1000BASE-T RJ45 to
1000BASE-SX, 850 nm, multimode, SC,
220 m
268669
CGFEB1014-120
10/100/1000BASE-T RJ45 to
1000BASE-LX, 1310 nm, multimode,
SC, 10 km
373909
CGFEB1024-120
10/100/1000BASE-T RJ45 to
1000BASE-SX, 1300 nm, extended,
multimode (62.5/125 fiber only), SC,
up to 2 km
SINGLE-MODE TO MULTIMODE SLIDE-IN CONVERTER MODULES
Anixter No. Vendor No.
Description
231628
CFMFF1314-200
Fast Ethernet or ATM/SONET, 1300 nm,
multimode, SC, 2 km to 1310 nm,
single-mode, SC, 20 km
231629
CFMFF1315-200
Fast Ethernet or ATM/SONET, 1300 nm,
multimode, SC, 2 km to 1310 nm,
single-mode, SC, 40 km
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Anixter No. Vendor No.
231633
CFMFF1314-220
231634
Description
Gigabit Ethernet 1000BASE-SX, 850 nm,
multimode, SC, 220 m to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
Gigabit Ethernet 1000BASE-SX, 850 nm,
multimode, SC, 220 m to 1000BASE-LX,
1310 nm, single-mode, SC, 25 km
CFMFF1315-220
HIGH-SPEED SERIAL-TO-FIBER SLIDE-IN MEDIA CONVERTER MODULES
Anixter No. Vendor No.
Description
330083
CPSVT2611-100
High-speed serial 26-pin to 1300 nm,
multimode, ST, 2 km
257498
CPSVT2613-100
High-speed serial 26-pin to 1300 nm,
multimode, SC, 2 km
330084
CPSVT2614-100
High-speed serial 26-pin to 1310 nm,
single-mode, SC, 20 km
Media Converters;Ethernet over Fiber/76
Index1.Networking Systems//Video Products//Video Security Systems
Hardened 10/100 Media Converters
INTERLOGIX
PR7933V2-12341.tif
Interlogix D7400 and D7100 Series Ethernet Media Converters combine
10/100 Ethernet signals over one or two optical fibers. The D7400 features four
RJ45 ports and two fiber ports for drop-and-repeat. The IFS D7400 and
D7100 Converters are compatible devices complying with IEEE 802.3. Models within
this series are available for use with multimode or single-mode optical fiber and are
compatible with standard 100-FX networks. Plug-and-play design ensures ease of
installation requiring no electrical or optical adjustments. Each converter
incorporates power and link status-indicating LEDs for monitoring proper system
operation. In addition, two continuously active contact closure relays are available to
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
Media Converters;Stand-alone/13235
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
Mini Stand-alone Media Converters
TRANSITION NETWORKS
PR12174V2-492649.tif
The Mini Media Converters provide a cost-effective method for integrating fiber optic
cabling into a 10/100 or 10/100/1000 UTP environment. With its miniature size, the
Mini offers a space-saving alternative while it converts copper to fiber with the
smallest footprint in the industry. Depending upon the unit, this plug-and-play media
converter offers three methods for powering the unit. The Mini can be powered with
the included power adapter, while other options include powering through a USB port
or through an 802.3af Power over Ethernet-enabled RJ45 port. Two power options can
be used simultaneously, providing the security of redundant power supplies. The Mini
is available with either ST or SC fiber interfaces and is available for either multimode
or single-mode fiber.
Anixter No. Vendor No.
Description
326709
MP/E-PSW-FX-01
10/100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, ST, 2 km
326710
M/E-PSW-FX-01-SC
10/100BASE-TX RJ45 to 100BASE-FX,
1300 nm, multimode, SC, 2 km
326711
M/E-PSW-FX-01-SM 10/100BASE-TX RJ45 to 100BASE-FX,
1310 nm, single-mode, SC, 20 km
379139
M/GE-PSW-SX-01
10/100/1000BASE-T to 1000BASE-SX,
850 nm, multimode, SC, 220 m
379175
M/GE-PSW-LX-01
10/100/1000BASE-T to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
8.21
Video Transmission, Media Conversion and Wireless
RS-232 AND RS-422/485 SLIDE-IN MODULE MEDIA CONVERTERS
Anixter No. Vendor No.
Description
284712
CRS2F3111-100
RS-232 with remote management
DB9 to 1300 nm, multimode, ST, 2 km
284730
CRS2F3114-100
RS-232 with remote management
DB9 to 1310 nm, single-mode, SC,
20 km
282279
CRS4F3111-100
RS-422/485 DB9 to 1300 nm,
multimode, ST, 2 km
282281
CRS4F3114-100
RS-422/485 DB9 to 1310 nm,
single-mode, SC, 20 km
282283
CRS4F3211-100
RS-422/485 terminal block to
1300 nm, multimode, ST, 2 km
282286
CRS4F3214-100
RS-422/485 terminal block to
1310 nm, single-mode, SC, 20 km
activate an external audible or visual warning signal in the event of a fiber break or
loss of power.
FEATURES
• D7400 Series combines four RJ45 ports to fiber 10/100
• D7100 converts one RJ45 port to fiber 10/100
• Auto-negotiate or switch-selectable data rate
• Auto network detection MDI/MDI-X
• Environmentally hardened -40 to +74C
• Multimode or single-mode versions
• UL Listed
Anixter No. Vendor No.
Description
272993
D7420
MM, 850 nm, 2F, Ethernet
272994
D7420WDM
MM, 850/1300 nm, 1F, Ethernet
272995
D7430WDM
SM, 1310 nm/1550 nm, 1F, Ethernet
272985
D7120
MM, 850 nm, 2F, Ethernet
272990
D7120WDMA/B
MM, 850/1300 nm, 1F, Ethernet
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Transceivers;Ethernet over Fiber/75
Index1.Networking Systems//Video Products//Video Security Systems
10/100 Mbps Ethernet Optical Transceiver
Video Transmission, Media Conversion and Wireless
INTERLOGIX
PR7932V2-12338.tif
The Interlogix D7100 Series Ethernet transceiver is designed to transmit and receive
10 or 100 Mbps data over multimode or single-mode fiber. The Interlogix
D7100 Series will function as a 10 Mbps Ethernet link, or as a 100 Mbps Ethernet
link without any adjustments. The D7100 Series is environmentally hardened to
operate in extreme temperatures. Status-indicating LEDs for power and data type are
present at the RJ45 connector and at the fiber optic transceiver end. Plug-and-play
design ensures ease of installation requiring no electrical or optical adjustments.
FEATURES
• Supports 10 or 100 Mbps Ethernet data
• Auto-negotiate or switch-selectable data rate
• Auto network detection MDI/MDI-X
• Environmentally hardened -40 to +74C
• Multimode or single-mode versions
• UL Listed
D
Anixter No. Vendor No.
Description
272985
D7120
MM, 850 nm, 2F, Ethernet
272990
D7120WDMA/B
MM, 850/1300 nm, 1F, Ethernet
Transceivers;Data/15011
Index1.Networking Systems//Video Products//Video Security Systems
Hardened Unmanaged 3-port Switch
INTERLOGIX
PR21460V2-121575.tif
• Distances up to 45 km (28 miles)
• Extended ambient operating temperature range: -40C to +74C
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure for remote alarm sensing
• IEEE 802.3 compliant
Anixter No. Vendor No.
Description
359496
DE7300-EE
3-port Gigabit Ethernet switch, 3 x
10/100/1000 TX electrical
359500
DE7300-MS
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 1 x
1000 FX MM, 1 x 1000 FX SM
359498
DE7300-MM
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX MM
359499
DE7300-M3
3-port Gigabit Ethernet switch, 3 x
1000 FX MM
359502
DE7300-SS
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX SM
359501
DE7300-SE
3-port Gigabit Ethernet switch, 2 x
10/100/1000 TX electrical, 1 x
1000 FX SM
359490
DE7100-EE
3-port Ethernet switch multimode
359492
DE7100-MM
3-port Ethernet switch, 2 x 100 FX MM,
1 x 10/100 TX electrical
359491
DE7100-ME
3-port Ethernet switch, 1 x 100 FX MM,
2 x 10/100 TX electrical
359495
DE7100-SS
3-port Ethernet switch, 2 x 100 FX SM,
1 x 10/100 TX electrical
Transceivers;Data/15012
Index1.Networking Systems//Video Products//Video Security Systems
Hardened Ethernet to Fiber Media Converters
INTERLOGIX
Interlogix DE7100 and DE7300 Series Ethernet 3-port transceivers are designed to
combine and convert Ethernet data over multimode, single-mode or Ethernet cable.
The DE7100 provides 10/100 ports. The DE7300 provides 10/100/1000 ports. Both
series are available in any combination of electrical or optical ports. They are
environmentally hardened to operate in extreme temperatures. Status-indicating LEDs
for power and data activity are present at the RJ45 connector. At the fiber optic
transceiver end, link and data LEDs provide operational status. Plug-and-play design
ensures ease of installation, requiring no optical adjustments. The modules are
available in stand-alone versions only.
FEATURES
• Auto network detection MDI/MDI-X
• Full-duplex or half-duplex data
8.22
PR21461V2-121576.tif
Interlogix DE7200, D7200M and DE7400 Series Ethernet to Fiber Media Converters
are designed to convert and transmit Ethernet signals over fiber. When space is at a
premium, use the D7200M series inside IP and megapixel camera housings. The
DE7200 and D7200M convert 10/100 signals. The DE7400 series converts 10/100/
1000 Ethernet signals. The entire series is designed to work over multimode or
single-mode to take Ethernet signals beyond the networking limitations of
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
Transceivers;Data/15013
Index1.Networking Systems//Video Products//Video Security Systems
10/100 Mbps Ethernet 3-port Transceiver
INTERLOGIX
PR21462V2-121573.tif
Interlogix's DE7300 Series Gigabit Ethernet 3-port transceiver is designed to transmit
and receive 1,000 Mbps data over fiber or 10/100/1000 Mbps data over Cat 5e
electrical cable. The DE7300 is environmentally hardened to operate in extreme
temperatures. At the fiber optic transceiver end, link and data LEDs provide
operational status. Plug-and-play design ensures ease of installation, requiring no
optical adjustments. The modules are available in stand-alone versions only.
FEATURES
• Full-duplex or half-duplex data
• Automatic Network Detection MDI/MDI-X
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• Extended ambient operating temperature range: -40C to +74C
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• Distances up to 30 km (18 miles)
• SC optical connectors standard
• IEEE 802.3 compliant
• Lifetime warranty
Anixter No. Vendor No.
Description
359496
DE7300-EE
3-port Gigabit Ethernet switch, 3 x
10/100/1000 TX electrical
359500
DE7300-MS
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 1 x
1000 FX MM, 1 x 1000 FX SM
359498
DE7300-MM
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX MM
359499
DE7300-M3
3-port Gigabit Ethernet switch, 3 x
1000 FX MM
359502
DE7300-SS
3-port Gigabit Ethernet switch, 1 x
10/100/1000 TX electrical, 2 x
1000 FX SM
359501
DE7300-SE
3-port Gigabit Ethernet switch, 2 x
10/100/1000 TX electrical, 1 x
1000 FX SM
8.23
Video Transmission, Media Conversion and Wireless
100 meters. The series is environmentally hardened to operate in extreme
temperatures, -40C to +74C. Loss of optical link contact closure for remote
alarm sensing. Status indicating LEDs for power and data rate are present at the
RJ45 connector. At the fiber optic transceiver end, link and data LEDs provide
operational status. Plug-and-play design ensures ease of installation requiring no
optical adjustments. The modules are available in stand-alone versions only. Device
used to take IP signals from access control, IP cameras, megapixel cameras, traffic
systems, or any IP system farther than 300 feet.
FEATURES
• Auto Network Detection MDI/MDI-X sensing
• Full-duplex or half-duplex data
• Distances up to 45 km (28 miles)
• Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• SC optical connectors standard
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• IEEE 802.3 compliant
Anixter No. Vendor No.
Description
359483
DE7200-M
2-port Ethernet media converter, 1 x
100 FX MM, 1 x 10/100 TX electrical
359484
DE7200-MM
2-port Ethernet repeater, 2 x
100 FX MM
359485
DE7200-MS
2-port Ethernet mode converter, 1 x
100 FX MM, 1 x 100 FX SM
359486
DE7200-S
2-port Ethernet media converter, 1 x
100 FX SM, 1 x 10/100 TX electrical
359488
DE7210M
2-port mini Ethernet converter, MM,
1300 nm, 1F
393861
DE7230M
2-port mini Ethernet converter, SM,
1300 nm, 1F
359487
DE7200-SS
Ethernet on fiber repeater (4 SM)
10/100
359489
DE7230M
Ethernet to fiber (2 SM) 10/100 mini
media converter
424766
DE7400-MM
Ethernet on fiber repeater (4 MM) GigE
424767
DE7400-MS
Ethernet on fiber mode converter,
single-mode to multimode GigE (2 SM
and 2 MM)
424769
DE7400-SS
Ethernet on fiber repeater (4 SM) GigE
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Video Transmission, Media Conversion and Wireless
Ethernet over Fiber
Transceivers;Data/15014
Systems;Fiber Fast Ethernet/3276
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
10/100/1000 Mbps Gigabit Ethernet 2-port Transceiver
S714D/S7714D Fiber Fast Ethernet System
INTERLOGIX
INTERLOGIX
PR21463V2-121584.tif
The Interlogix DE7400 Series Gigabit Ethernet 2-port transceiver is designed to
transmit and receive 1000 Mbps data over fiber or 10/100/1000 Mbps data over
Cat 5e electrical cable. It is available in any combination of electrical or optical
ports. The DE7400 is environmentally hardened to operate in extreme temperatures.
Loss of optical link contact closure for remote alarm sensing. Status-indicating LEDs
for power and data activity are present at the RJ45 connector. At the fiber optic
transceiver end, link and data LEDs provide operational status. Plug-and-play design
ensures ease of installation, requiring no optical adjustments. The modules are
available in either stand-alone or rack-mount versions.
FEATURES
• Full-duplex or half-duplex data
• Auto Network Detection MDI/MDI-X
• Designed to meet full compliance with the environmental requirements (ambient
D
operating temperature,
mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
• Extended ambient operating temperature range: -40C to +74C
• No in-field optical adjustments required
• Power, transmit and receive data status LED indicators
• Loss of optical link contact closure
• Distances up to 30 km (18 miles)
• SC optical connectors standard
• IEEE 802.3 compliant
Anixter No. Vendor No.
Description
359504
DE7400-M
2-port Gigabit Ethernet media
converter, 1 x 10/100/1000 TX
electrical, 1 x 1000 FX MM, 2F
359507
DE7400-S
2-port Gigabit Ethernet media
converter, 1 x 10/100/1000 TX
electrical, 1 x 1000 FX SM, 2F
8.24
PR14977V2-33972.tif
The S714D provides fiber optic transmission of 100BASE-T Fast Ethernet data or
10BASE-T Ethernet data over distances up to 28 mi. (45 km). The S714D combines the
benefits of Interlogix's advanced engineering with the highest-quality standards in
the industry. The S714D makes it possible to add the security and efficiency of
transmission over fiber to local area networks (LANs) and other Ethernet
applications. Interlogix's unique SMARTS (Status Monitoring And Reliability Test
System) technology provides constant monitoring of the link and the equipment
connected to it. The status of the link and the system can be determined at a glance
without the use of expensive test equipment. Stand-alone modules are housed in a
rugged steel enclosure with a convenient, secure wall-mounting system.
FEATURES
• Supports 100BASE-T Fast Ethernet and 10BASE-T Ethernet protocols
• Automatic polarity correction
• Switch-selectable crossover
• Optical budget 13 dB
• Optical automatic gain control (OAGC)
• SMARTS diagnostics
MULTIMODE
Anixter No.
273597
342350
273598
273599
Vendor No.
S714DT-EST1
S714DR-EST1
S714D-EST2
S714D-EST2L
SINGLE-MODE
Anixter No. Vendor No.
273600
S7714DT-EST1
342354
273601
S7714DR-EST1
S7714D-EST2
Description
1-fiber link, 850/1300 nm, transmitter
1-fiber link, 850/1300 nm, receiver
2-fiber link, 850 nm, transceiver
2-fiber link, 1300 nm, transceiver
Description
1-fiber link, 1310/
1550 nm, transmitter
1-fiber link, 1310/1550 nm, receiver
2-fiber link, 1310 nm, transceiver
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Media Converters;Stand-alone/2736
Media Converters;Stand-alone/3955
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
Index1.Networking Systems//Peripheral Devices//Protocol Converters
Fast Ethernet Stand-alone Converters
TRANSITION NETWORKS
Gigabit Ethernet Stand-alone Converters
PR9933V2-492852.tif
Media Converters;Stand-alone/11485
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
Extended-temperature Fast Ethernet Converters
TRANSITION NETWORKS
PR9936V2-492861.tif
PR12171V2-492640.tif
Migrate to Gigabit in a cost-effective manner. When Gigabit media converters are
used in conjunction with lower-cost 1000BASE-T switches, users can take advantage
of the high-bandwidth Gigabit Ethernet offers without all of the higher costs. Optional
single-strand media converters allow you to double your fiber capacity by
transmitting and receiving data over one strand of fiber.
Anixter No. Vendor No.
Description
332341
SGETF1013-110
1000BASE-T RJ45 to 1000BASE-SX,
850 nm, multimode, SC, 220 m
333559
SGETF1014-110
1000BASE-T RJ45 to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
333562
SGETF1024-110
1000BASE-T RJ45 to 1000BASE-SX,
1310 nm, extended multimode, SC,
2 km
333563
SGETF1029-110
1000BASE-T RJ45 to 1000BASE-LX,
1310 nm TX/1550 nm RX, single-fiber,
single-mode, SC 20 km
333565
SGETF1029-111
1000BASE-T RJ45 to 1000BASE-LX,
1550 nm TX/1310 nm RX, single-fiber,
single-mode, SC 20 km
Designed to operate in Fast Ethernet environments where ambient temperatures can
rise as high as 65C (149F). Operating temperature: -25C to +65C with
100BASE-TX RJ45 to 100BASE-FX connection.
Anixter No. Vendor No.
Description
284527
E-100BTX-FX-05-HT
With 1300 nm, multimode, ST, 2 km
284530
E-100BTX-FX-05-SCHT With 1300 nm, multimode, SC, 2 km
284532
E-100BTX-FX-05-SMHT With 1310 nm, single-mode, SC, 20 km
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.25
Video Transmission, Media Conversion and Wireless
Extend the distance between two fast Ethernet devices up to 2 km on multimode fiber
and up to 40 km on single-mode fiber; other long-haul options are available. These
full-featured products include AutoCross, Auto-negotiation, Link Pass Through, Far
End Fault and Pause. Converters supporting extended operating temperatures are also
available. 10/100 bridging converters are ideal for connecting 10/100 devices to a
100 Mbps fiber backbone with 100BASE-TX RJ45 to 100BASE-FX connections.
Anixter No. Vendor No.
Description
213792
E-100BTX-FX-05
With 1300 nm, multimode, ST, 2 km
214108
E-100BTX-FX-05-SC With 1300 nm, multimode, SC, 2 km
255573
E-100BTX-FX-05-MT With 1300 nm, multimode, MT-RJ, 2 km
312465
E-100BTX-FX-05-LC With 1300 nm, multimode, LC, 2 km
255575
E-100BTX-FX-05-SM With 1310 nm, single-mode, SC, 20 km
284520
E-100BTX-FX-05-LH With 1310 nm, single-mode, SC, 40 km
TRANSITION NETWORKS
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Media Converters;Stand-alone/10820
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
10/100/1000 Media Converters
Video Transmission, Media Conversion and Wireless
TRANSITION NETWORKS
PR9940V2-492870.tif
The 10/100/1000 media converters will offer a low-cost integration option for
network managers who want to migrate from 10/100 networks to Gigabit Ethernet.
Gigabit-only switches can now be connected to a 10/100 network at distances up to
125 km with long-haul options.
Anixter No. Vendor No.
Description
268663
SGFEB1013-120
10/100/1000BASE-T RJ45 to
1000BASE-SX, 850 nm, multimode, SC,
220 m
373495
SGFEB1014-120
10/100/1000BASE-T RJ45 to
1000BASE-LX, 1310 nm, single-mode,
SC, 10 km
D
268667
SGFEB1024-120
10/100/1000BASE-T RJ45 to
1000BASE-SX, 1310 nm, extended
multimode, SC, 2 km
Media Converters;Stand-alone/11512
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
Power over Ethernet Media Converters
TRANSITION NETWORKS
PR23266V2-492353.tif
POWER OVER FAST ETHERNET MEDIA CONVERTERS - AC POWERED 100BASE-TX
RJ45 TO 100BASE-FX
Anixter No. Vendor No.
Description
285061
SFEPE1011-100
1300 nm, multimode, ST, 2 km
285062
SFEPE1013-100
1300 nm, multimode, SC, 2 km
285063
SFEPE1014-100
1310 nm, single-mode, SC, 20 km
285064
SFEPE1011-110
1300 nm, multimode, ST, 2 km
285065
SFEPE1013-110
1300 nm, multimode, SC, 2 km
285067
SFEPE1014-110
1310 nm, single-mode, SC, 20 km
10/100 BRIDGING POWER OVER ETHERNET MEDIA CONVERTERS - 10/1000BASE-TX
TO 100BASE-FX
Anixter No. Vendor No.
Description
330092
SPOEB1011-100
1300 nm, multimode, ST, 2 km
330093
SPOEB1013-100
1300 nm, multimode, SC, 2 km
330094
SPOEB1014-100
1310 nm, single-mode, SC, 20 km
10/100/1000 BRIDGING POWER OVER ETHERNET MEDIA CONVERTERS
Anixter No. Vendor No.
Description
379289
SGPOE1013-100
10/100/1000BASE-T to 1000BASE-SX,
850 nm, multimode, SC, 200 m
379290
SGPOE1014-100
10/100/1000BASE-T to 1000BASE-LX,
1310 nm, single-mode, SC, 10 km
379288
SGPOE1040-100
10/100/1000BASE-T to 100/
1000BASE-X SFP slot (empty)
379291
SGPOE1040-110
10/100/1000BASE-T to two 100/
1000BASE-X SFP slots (empty)
10/100/1000 POWER OVER ETHERNET PLUS MEDIA CONVERTER
Anixter No. Vendor No.
Description
491023
SGPAT1013-100
10/100/1000BASE-T to 1000BASE-SX
multimode, 850 nm SC
517283
SGPAT1014-100
10/100/1000BASE-T to 1000BASE-LX
single-mode, 1310 nm SC
517284
SGPAT1039-100
10/100/1000BASE-T to 1000BASE-SX
multimode, 850 nm LC
517285
SGPAT1019-100
10/100/1000BASE-T to 1000BASE-LX
single-mode, 1310 nm LC
Extend network distances and power PoE-enabled devices with a Power over Ethernet
media converter from Transition Networks. These PoE converters will enable
enterprises to power network devices directly over a UTP data connection. The Power
over Ethernet (PoE) converter emulates IEEE 802.3af Power Sourcing Equipment (PSE)
and it is compatible with Powered Devices (PD) that comply with the 802.3af
Standard. The ideal solution for delivering power over copper cabling to wireless
access points, IP telephones and PoE cameras.
8.26
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Transceivers;Ethernet/15986
Media Converters;Network/15124
Index1.Networking Systems//Peripheral Devices//Transceivers/Multiplexers
Index1.Networking Systems//Video Products//Video Security Systems
Small Form Factor Pluggables
TRANSITION NETWORKS
Copper Ethernet to Fiber Network Media Converters
PR11103V2-492481.tif
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
PR21518V2-122455.tif
American Fibertek's V'nes MX Media Converter series enables network managers to
connect 10/100 Fast Ethernet or 1,000 Mbps GigE twisted-pair to fiber optic cabling
for wide bandwidth, cost-effective short- or long-distance transmission. Multiple-port
design reduces installation and cable allowing for multiple inputs to run on a single
path. The Media Converter MX series provides optional single-fiber WDM technology
combining dual-fiber cable into single cable for greater cost savings. Front-panel
LEDs provide easy status checking along with Link Fault Pass Through and MDI/MDI-X
for easy installation. When combined with Commander series switch products, the
MX provides easy and cost-effective solutions to convert any number of ports from
twisted-pair to fiber. The MX product line is available as stand-alone modules that
can also be directly inserted into a modular rack and SR-20-compatible rack
modular cards.
FEATURES
• Available in 10/100 and 10/100/1000 forms for both Ethernet and single-mode
and multimode fiber
• Different speeds can be mixed on either type of product
• Dual Ethernet ports allow for connection of two network devices
• Stand-alone units easy to convert to rack-mount units with addition of a
front panel
• Link-fault detection using LEDs to indicate transmission problems
Anixter No. Vendor No.
Description
369087
MX2-100MM-2KM
10/100BASE-T 2-port copper to 1-port
MM fiber - 2 km
369088
MX2-100SM-20KM
10/100BASE-T 2-port copper to 1-port
SM fiber - 20 km
369089
MX2-1000MM-500M 10/100/1000BASE-T 2-port copper to
1-port MM fiber - 500 m
369090
MX2-1000SM-20KM 10/100/1000BASE-T 2-port copper to
1-port SM fiber - 20 km
369092
MX4-100TX
10/100BASE-T 4-port copper TX
369093
MX4-1000TX
10/100/1000BASE-T 4-port copper TX
369094
MXRC-1
Rack for MX modules including
power supply
369096
MXRCPS-1
Power supply for MXRC-1
8.27
Video Transmission, Media Conversion and Wireless
Transition Networks Small Form Factor Pluggable (SFP) transceivers are designed for
bi-directional serial optical data communications such as Gigabit Ethernet or Fiber
Channel at speeds up to 1.25 Gbps. This device is designed for use in switches, and
routers compatible with Small Form Factor Pluggable Multi-Sourcing
Agreement (MSA).
Anixter No. Vendor No.
Description
313699
TN-SFP-SX
1000BASE-SX, 850 nm, multimode, LC,
220 m
313700
TN-SFP-LX1
1000BASE-LX, 1310 nm, single-mode,
LC, 10 km
313701
TN-SFP-LX3
1000BASE-LX, 1310 nm, single-mode,
LC, 30 km
313702
TN-SFP-LX5
1000BASE-LX, 1550 nm, single-mode,
LC, 50 km
313703
TN-SFP-LX8
1000BASE-LX, 1550 nm, single-mode,
LC, 80 km
330115
TN-SFP-LX12
1000BASE-LX, 1550 nm, single-mode,
LC, 120 km
330097
TN-SFP-FC2XM
Fiber channel 2.5 Gbps, 850 nm,
multimode, LC, 150 m
330116
TN-SFP-FC2XS15
Fiber channel 2.5 Gbps, 1310 nm,
single-mode, LC, 15 km
330117
TN-SFP-FC2XS2
Fiber channel 2.5 Gbps, 1310 nm,
single-mode, LC, 2 km
330118
TN-SFP-FC2XS40
Fiber channel 2.5 Gbps, 1310 nm,
single-mode, LC, 40 km
330119
TN-SFP-OC12M
OC12 622 Mbps, 1310 nm, multimode,
LC, 1 km
330120
TN-SFP-OC12S
OC12 622 Mbps, 1310 nm,
single-mode, LC, 20 km
330121
TN-SFP-OC3M
OC3 125 Mbps, 1310 nm, multimode,
LC, 2 km
330122
TN-SFP-OC3S
OC3 155 Mbps, 1310 nm, single-mode,
LC, 20 km
AMERICAN FIBERTEK
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Control and Signaling over Fiber
Anixter No. Vendor No.
359520
DECR3020
./Closures;Fiber/3649
Index1.Networking Systems//Video Products//Video Security Systems
Contact Closure Transmission
INTERLOGIX
PR14890V2-31948.tif
359522
DECR3030
Description
8-channel contact closure to Ethernet
Rx, 100FX MM
8-channel contact closure to Ethernet
Rx, 100FX SM
Transceivers;Fiber/3413
Index1.Networking Systems//Video Products//Video Security Systems
Self-healing Ring/Full Duplex Data Transceiver D19100SHR Series
Video Transmission, Media Conversion and Wireless
INTERLOGIX
Interlogix offers a line of equipment that allows up to eight contact closure
transmissions over one optical fiber or Ethernet. For alarm event-triggering, building
HVAC, fire BA access control, lane/gate control.
FEATURES
• No in-field adjustments
• Relay contact rating: 200 V DC, 0.5 amps, normally open
• Wide operating ambient temperature range (-40 to +74C)
• Lifetime warranty
TRANSMITTERS
Anixter No. Vendor No.
332765
DT3010
341453
DT3025
D
341454
DT3030
347820
DT3010-R3
393855
DT3025-R3
393856
DT3030-R3
359514
359515
DECT3000
DECT3020
359517
DECT3030
RECEIVERS
Anixter No. Vendor No.
332766
DR3010
342971
DR3010-R3
341456
393857
DR3020
DR3020-R3
341457
393859
DR3025
DR3025-R3
341455
303827
DR3030
DR3030-R3
359519
DECR3000
8.28
Description
MM, transmitter, 850 nm, 1F
SM, transmitter, 1300 nm, 1F
SM/MM, transmitter, 1300 nm, 1F
MM, transmitter, 850 nm,
1F, rack-mounted
SM, transmitter, 1300 nm,
1F, rack-mounted
SM/MM, transmitter, 1300 nm,
1F, rack-mounted
Ethernet converter 10/100
MM, transmitter, contact closure to
Ethernet, 2F
SM, transmitter, contact closure to
Ethernet, 2F
PR7931V2-12335.tif
The D19130SHR Series Self-healing Ring Transceiver unit is a fully digital transceiver
designed for implementing traffic signalization/communications data networks of the
highest possible reliability. Unlike competing products, the multiple-master
capability of this series provides full protection against the possibility of a single
point of failure, significantly enhancing the reliability and availability of the network.
Primary and alternate-master transceiver units may be either co-located or diversity
located, and the data input/output interconnection to the primary and
alternate-master units is achieved by the use of a simple "Y" electrical cable.
FEATURES
• Unique multiple-master capability eliminates the possibility of a single point of
failure within the network
• Full data reclocking and regeneration
• User-configurable optical and electrical anti-streaming provides network
protection against faulty streaming controller operation
Anixter No. Vendor No.
Description
303739
D19130SHR-R3
SM, 1300 nm, 2F, rack-mount
Description
MM, receiver, 850 nm, 1F
MM, receiver, 850 nm,
1F, rack-mounted
MM, receiver, 1300 nm, 1F
MM, receiver, 1300 nm,
1F, rack-mounted
SM, receiver, 1300 nm, 1F
SM, receiver, 1300 nm,
1F, rack-mounted
SM/MM, receiver, 1300 nm, 1F
SM/MM, receiver, 1300 nm,
1F, rack-mounted
8-channel contact closure to Ethernet
Rx, 10/100TX electrical
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Accessories
./Chassis;Rack-mount/18719
Index1.Networking Systems//Video Products//Video Security Systems
Rack-mount Chassis for Video Multiplexers
INTERLOGIX
PR7939V2-12356.tif
Power Supplies;Fiber Module/3288
Use this chassis with the various Interlogix rack-mount cards selected for
your application.
The R3 rack-mount card cage provides for the elimination of a single-point failure in
the event of a major fault within any module located within the chassis rack.
Anixter No. Vendor No.
Description
243589
R3
19 in. rack, 115 V AC input (includes
power supply)
243590
R3-230
19 in. rack-mount card cage, 14 slots,
230 V AC input
243591
R3-BP
Blank panel for R3 card cage (1 in.)
Index1.Networking Systems//Video Products//Video Security Systems
Power Supplies for Fiber Modules
INTERLOGIX
PR14978V2-33992.tif
Accessories;Fiber/3284
Index1.Networking Systems//Video Products//Video Security Systems
Fiber Optic Accessories
INTERLOGIX
PR14976V2-34007.tif
The 600P series power supplies are designed to supply low-voltage power for
Interlogix's stand-alone modules. The 610P plugs directly into a wall outlet, while the
other models all have input power cables with attached plugs. The 613P and 614P
have detachable power cables and may be used with input voltages from 100 V AC to
240 V AC.
FEATURES
• Models with AC or DC output
• Models for North American and international applications
• All have appropriate safety ratings
STAND-ALONE POWER SUPPLY
The 61xP series power supplies are designed to supply low voltage power for
standalone fiber link modules.
Interlogix offers a full line of card cage racks and enclosures to support its fiber optic
transmission systems. The compact 515R1 and 517R1 card cage racks provide
high-density racking for link modules. They mount in standard 19 in. (483 mm)
instrument racks. The 515R1 includes an internal power supply and accommodates
15 1 in. cards or the equivalent of 1, 2 and 3 in. cards. The 517R1 uses an external
power supply and accommodates 17 1 in. cards or the equivalent. The 503H offers
very compact 19 in. EIA rack mounting for three 1 in. rack cards. The 501R, 502R and
503R stand-alone enclosures permit local stand-alone mounting of models that are
normally available as rack cards.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
Anixter No. Vendor No.
252923
613P
273642
614P
Description
13.5 V DC @ 1.7 amp out
13.5 V DC @ 2.3 amp out
8.29
Video Transmission, Media Conversion and Wireless
FEATURES
• Card cage racks for EIA consoles
• 515R1 and 517R1 racks accommodate redundant power supplies
• 515PS1 and 517EPS1 have fiber fail and output level alarms
• Stand-alone enclosures permit local installation of rack card models
• 501R and 502R enclosures accommodate 1, 2 and 3 in. rack cards
Anixter No. Vendor No.
Description
273624
503H
Rack, horizontal, 1 RU
252922
515R1
Rack, vertical, 2 RU
273627
517R1
Rack, vertical, 3 RU
319304
517EPS1
Rack, horizontal, 1 RU
273628
501R
Enclosure, one slot
273630
502R
Enclosure, two slots
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
./Transceivers;Passive/15207
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Passive Transceivers
Video Transmission, Media Conversion and Wireless
NVT
PR21687V2-125573.tif
The NVT models NV-208A-M and the NV-214A-M transceivers are passive
(nonamplified) devices, which allow the transmission of real-time analog video over
unshielded twisted-pair (UTP) telephone wire. "Up-the-Coax" telemetry signals are
supported when used with any other passive NVT model including NVT passive hubs.
FEATURES
• Single-channel passive transceiver with screwless UTP video-signal termination
• No power required, built-in transient protection, supports "Up-the-Coax"-type
control signal up to 750 ft.
• Transmit with another passive NVT transceiver up to 750 ft.; transmit up to
3,000 ft. if used with an active receiver
• A-M = Male BNC; the NV-214A-M features a 9 in. mini-coax pigtail and
screwless UTP termination
• Limited lifetime warranty
Anixter No. Vendor No.
Description
D
322648
NV-208A-M
Single-channel passive video
transceiver (male BNC)
299547
NV-214A-M
Single-channel passive video
transceiver (mini-coax pigtail)
MOUNTING BRACKET
Anixter No. Vendor No.
393096
NV-BKT214-8
Description
For NV-215J-M (eight each)
For digital-recording applications, it is recommended that
passive-to-passive transmission (Example: NV-214A-M) distances be
limited to no more than 750 ft. For distances greater than 750 ft.,
please use an NVT Active Receiver product.
Receivers;Active/3042
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Active Video Receiver
NVT
PR2871V2-32081.tif
5e unshielded twisted pair (UTP). Baseband (composite) signals of any type are
supported. The unparalleled interference rejection and low emissions of the Model
NV-652R allow long-run video signals to coexist in the same wire bundle as
telephone, datacom or low-voltage power circuits. This allows the use of a shared or
existing cable plant. Ground-lifting ensures no annoying "hum bars" when ground
potential differences exist. With built-in transient protection, damaging voltage-spike
problems are eliminated.
FEATURES
• Single-channel active receiver with screw-terminal video-input termination
• Use with an NVT passive transceiver for distances up to 3,000 ft.
• Use with NV-653T transmitter for distances up to one mile
• Built-in transient protection; built-in ground-lifting
• Built-in brightness and sharpness controls; blue power LED, green
video-receive LED
• Limited lifetime warranty
Anixter No. Vendor No.
Description
234067
NV-652R
Active video receiver
The NV-652R requires floating 12-24 V AC/DC; power supply not included.
Transmitters;Active/3045
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Active Transmitter
NVT
PR2872V2-32082.tif
The NVT model NV-653T Video Transmitter is an active, amplified device that allows
the transmission of real-time monochrome or color video up to one mile using
Category 5e unshielded twisted pair (UTP). Baseband (composite) signals of any type
are supported. The unparalleled interference rejection and low emissions of the
model NV-653T allows long-run video signals to coexist in the same wire bundle as
telephone, datacom or low-voltage power circuits. This allows the use of a shared or
existing cable plant. With built-in transient protection, damaging voltage-spike
problems are eliminated.
FEATURES
• Single-channel active transmitter with screw terminal video output termination
• Use with an NVT active receiver for distances up to one mile
• Built-in transient protection
• Three-position range switch; blue power LED, green video-receive LED
• Limited lifetime warranty
Anixter No. Vendor No.
Description
234070
NV-653T
Single-channel active video transmitter
The NV-653T requires floating 24 V AC/DC; power supply not included.
The NVT model NV-652R Video Receiver is an active, amplified device that allows the
transmission of real-time monochrome or color video up to one mile using Category
8.30
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
Transceivers;Passive/4105
Index1.Networking Systems//Video Products//Video Security Systems
Passive 4-channel Video Transceiver
NVT
pr5951V2-14708.tif
Two NV-413As may be rack-mounted using the NV-RM8/10 rack panel kit.
Contact your local sales representative for further information.
Receivers;Active/4169
Index1.Networking Systems//Video Products//Video Security Systems
NV-452R 4-channel Active Receiver
NVT
pr5952V2-14711.tif
Two NV-452Rs may be rack mounted using the NV-RM8/10 rack panel kit.
Contact your local sales representative for further information.
The NV-452R requires floating 24 V AC/DC; power supply not included.
Transceivers;Passive/15209
Index1.Networking Systems//Video Products//Video Security Systems
Passive Video Transceiver Stub Hubs
NVT
PR21689V2-125581.tif
The NVT models NV-813S, NV-1613S and NV-3213S are passive transceiver stub hubs
that allow transmission of real-time monochrome or color video over unshielded
twisted-pair (UTP) telephone wire. Baseband (composite) signals of any type are
twisted-pair supported.
FEATURES
• 19 in. wide, 1U high, less than 2 in. deep
• Supports RJ45 or screw-terminal video termination
• Use with another passive transceiver for distances up to 750 ft.
• Use with an NVT active receiver for distances up to 3,000 ft.
• No power required
• Built-in transient protection
• Supports "Up-the-Coax"-type control signal up to 750 ft.
• Includes rack-mount hardware and screw-terminal adapters (RJ45A)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
363025
NV-813S
8-channel
363174
NV-1613S
16-channel
363028
NV-3213S
32-channel
The NVT model NV-452R 4-channel Active Receiver is an active (amplified) device that
allows the transmission of real-time monochrome or color video on up to one mile
using Category 5e unshielded twisted pair (UTP). The unparalleled interference
rejection and low emissions of the model NV-452R allows long-run video signals to
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.31
Video Transmission, Media Conversion and Wireless
The NVT model NV-413A 4-channel Video Transceiver is a passive (nonamplified)
device that allows the transmission of real-time monochrome or color video over
Category 5e unshielded twisted pair (UTP). "Up-the-Coax"-type signal may be sent
over the same wire pair. When used as a receiver, the NV-413A is fully compatible
with qualified cameras that are equipped with an NVT twisted-pair output.
The unparalleled interference rejection and low emissions of the model NV-413A allow
video signals to coexist in the same wire bundle as telephone, datacom or low-voltage
power circuits. This allows the use of a shared or existing cable plant. With built-in
transient protection, damaging voltage-spike problems are eliminated. It can be used
as a passive transmitter or receiver.
FEATURES
• 4-channel passive transceiver with either RJ45 or screw-terminal
video termination
• Supports "Up-the-Coax"-type control signal up to 750 ft.
• Distances up to 750 ft. when used with another passive transceiver
• Transmit up to 3,000 ft. with NVT active receivers
• No power required
• Built-in transient protection
• Limited lifetime warranty
Anixter No. Vendor No.
Description
258752
NV-413A
Passive 4-channel video transceiver
coexist in the same wire bundle as telephone, datacom or low-voltage power circuits.
This allows the use of a shared or existing cable plant. Ground-lifting ensures no
annoying "hum bars" when ground potential differences exist. With built-in transient
protection, damaging voltage-spike problems are eliminated.
FEATURES
• 4-channel active receiver with RJ45 or screw terminal video input termination
• Distances up to 3,000 ft. when used with an NVT passive transceiver
• One mile when used with NV-653T transmitter
• Built-in transient protection and ground-lifting
• Built-in brightness and sharpness controls; blue power LED, green
video-receive LED
• Limited lifetime warranty
Anixter No. Vendor No.
Description
299587
NV-452R
Active 4-channel receiver
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
NV-3272 DIGITALEQ ACTIVE HUB
Receivers;Active/15206
Index1.Networking Systems//Video Products//Video Security Systems
Video Transmission, Media Conversion and Wireless
DigitalEQ Active Receiver Hubs
NVT
The NVT models NV-872, NV-1672 and NV-3272 are DigitalEQ active receiver hubs
that allow the transmission of real-time monochrome or color video for distances up
to one mile using Category 2 or better unshielded twisted-pair (UTP) wire. The
DigitalEQ active receiver hub continuously and automatically compensates for cable
attenuation, ground loops and wiring polarity, independent of video-signal image.
FEATURES
• Per channel fully automatic digital signal distance equalization and
polarity correction
• Use with an NVT passive transceiver for distances up to 3,000 ft.
• Use with an NVT active transceiver for distances up to one mile
• Supports screw terminal or RJ45 UTP video inputs
• RJ45 video connectivity with optional NV-RJ45A; RJ45-to-screw-terminal
adapters included
• Includes eight, 16 or 32 2 ft. coax jumper cables, NV-RJ45 adapters and
rack-mount hardware
• Built-in transient protection and ground lifting
• Limited lifetime warranty
NV-872 DIGITALEQ ACTIVE DA HUB
PR21686V2-125561.tif
- One video output per channel
- High-density 19 in. 1U-high enclosure features 32 input and output video channels
- Includes (32) 2 ft. coax jumper cables, rack-mount hardware and eight
screw-terminal adapters (NV-RJ45A)
Anixter No. Vendor No.
362797
NV-3272
Description
32-channel
Receivers;Active/15992
Index1.Networking Systems//Video Products//Video Security Systems
StubEQ Active Receiver Hubs
NVT
PR23572V2-165906.tif
PR21684V2-125575.tif
D
- Four distribution amplifier video outputs per input channel
- High-density 19 in. 1U-high enclosure features eight input channels
- Includes eight 2 ft. coax jumper cables, rack-mount hardware and two
screw-terminal adapters (NV-RJ45A)
Anixter No. Vendor No.
361242
NV-872
Description
8-channel
NV-1672 DIGITALEQ ACTIVE DA HUB
PR21685V2-125560.tif
- Two distribution amplifier video outputs per input channel
- High-density 19 in. 1U-high enclosure features 16 input channels
- Includes (16) 2 ft. coax jumper cables, rack-mount hardware and four
screw-terminal adapters (NV-RJ45A)
Anixter No. Vendor No.
362795
NV-1672
8.32
Description
16-channel
The NVT models NV-442, NV-842, NV-1642 and NV-3242 employ NVT's
latest-generation StubEQ technology that allows the transmission of fiber-like analog
video for distances up to 2,000 ft. using Category 2 or better unshielded twisted-pair
(UTP) wire. The receiver hub continuously and automatically conditions the video
signal, compensating for cable attenuation, ground loops and voltage transients,
independent of video-signal content.
FEATURES
• Adaptive StubEQ fully automatic two-band equalization provides
adjustment-free equalization every time
• Individually floating 1 A or 0.5 A 28 V AC outputs
• The NV-842, NV-1642 and the NV-3242 are rack-mountable and include
mounting hardware
• The NV-442 is rack-mountable when used with the NV-RM-8/10
• Has a 1.8 in. depth, 11.5 in. 1U-high enclosure
• Full-motion CCTV video at distances up to 1,500 ft. when used with any
passive NVT transceiver or hub; 2,000 ft. when used with the NV-653T
active transmitter
• RJ45 connectivity with optional NV-RJ45A; RJ45-to-screw-terminal
adapters included
• Exceptional interference rejection
• Built-in transient protection and ground-lifting
• Compatible with qualified UTP cameras
• Limited lifetime warranty
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
NV-442
- Shallow 1.85 in. deep, 11.5 in. 1U-high enclosure features four input channels
- Includes one screw-terminal adapter (NV-RJ45A)
Anixter No. Vendor No.
422124
NV-442
Description
4-channel
NV-842
- Shallow 1.85 in. deep, 19 in. 1U-high enclosure features eight input channels
- Includes eight rack-mount hardware and two screw-terminal adapters (NV-RJ45A)
Anixter No. Vendor No.
393005
NV-842
Description
8-channel
NV-1642
PR23573V2-165902.tif
FEATURES
• Single-channel Power-video transceiver with RJ45 and BNC
• Power-video-data (PVD) signals are routed via UTP and RJ45 or screwless
terminal block for organized pass-through of inputs/outputs
• Mini-coax pigtail supports in-camera mounting in most dome cameras
• Use with NVT's PVD Power Supply Hubs and Cable Integrators
• Up to 3,000 ft. with an NVT active receiver or hub
• Supports "Up-the-Coax"-type control signal up to 750 ft. when used with a
passive transceiver
• Exceptional interference rejection (built-in transient protection)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
323644
NV-216A-PV
Single-channel Power-video transceiver
Index1.Networking Systems//Video Products//Video Security Systems
Passive Single-channel Power-video-data Transceiver
NVT
PR14892V2-32077.tif
- Shallow 1.85 in. deep, 19 in. 1U high enclosure features eight input channels
- Includes eight rack-mount hardware and two screw-terminal adapters (NV-RJ45A)
Anixter No. Vendor No.
393052
NV-1642
Description
16-channel
NV-3242
PR23574V2-165908.tif
- Shallow 1.85 in. deep, 19 in. 1U-high enclosure features eight input channels
- Includes eight rack-mount hardware and two screw-terminal adapters (NV-RJ45A)
Anixter No. Vendor No.
393053
NV-3242
Description
32-channel
Transceivers;Passive/14212
Index1.Networking Systems//Video Products//Video Security Systems
Passive Single-channel Power-video Transceiver
NVT
PR13606V2-31158.tif
The NVT model NV-218A-PVD Power-Video-Data Transceiver is a passive
(nonamplified) device that allows the transmission of real-time monochrome or color
video over Category 5e unshielded twisted pair (UTP). Baseband (composite) signals
of any type are supported.
FEATURES
• Single-channel Power-video-data transceiver with RJ45, BNC and screwless
terminal inputs
• Power-video-data (PVD) signals are routed via UTP and RJ45 or screwless
terminal block for organized pass-through of inputs/outputs
• Mini-coax pigtail supports in-camera mounting in most dome cameras
• Use with NVT's PVD Power Supply Hubs and Cable Integrators
• Up to 3,000 ft. with an NVT active receiver or hub
• Supports "Up-the-Coax"-type control signal up to 750 ft. when used with a
passive transceiver
• Exceptional interference rejection (built-in transient protection)
• Limited lifetime warranty
Anixter No. Vendor No.
Description
299548
NV-218A-PVD
Single-channel
Power-video-data transceiver
The NVT model NV-216A-PV Power-Video Transceiver with power is a passive
(nonamplified) device that allows the transmission of real-time monochrome or color
video over Category 5e unshielded twisted pair (UTP). Baseband (composite) signals
of any type are supported.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.33
Video Transmission, Media Conversion and Wireless
Transceivers;Passive/12705
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
Transmitters;Passive/15211
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Video Transmitter and 12 V DC Converter
Video Transmission, Media Conversion and Wireless
NVT
PR21691V2-125583.tif
The NVT model NV-226J-PV Video Transmitter and 12 V DC Converter is a passive
(nonamplified) video transmitter combined with a 24 V AC-to-12 V DC converter.
Designed to fit on the back of a fixed 12 V DC camera, this unit is architected to
convert 24 V AC power from the control room, while delivering real-time baseband
(composite) video at extended distances, all over one 4-pair UTP cable.
FEATURES
• Extended camera power and video (distance) routed through UTP and RJ45
• Supports 12 V DC cameras with onboard regulated power
• Use with NVT's PVD Power Supply Hubs and Cable Integrators
• Video up to 3,000 ft. with NVT's Active Receiver Hubs
• Video up to 750 ft. with NVT's Passive Receiver Hubs
• Supports "Up-the-Coax"-type control signals up to 750 ft.
• Exceptional interference rejection
D
• Built-in transient
protection
• Limited lifetime warranty
Anixter No. Vendor No.
Description
363158
NV-226J-PV
Passive video transmitter
Hubs;Power Supply/14213
Index1.Networking Systems//Video Products//Video Security Systems
PVD Power-supply Hubs
NVT
PR13607V2-31167.tif
The NVT models NV-4PS10-PVD and NV-16PS10-PVD are multichannel power
supply-integrator hubs which combine a one amp/channel power supply with
pass-through video and telemetry data, for up to four and 16 cameras respectively,
all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the
control/MDF room, they consolidate connectivity via standard 4-pair RJ45
ANSI/TIA-568-C.0 compliant premises wiring and pin-outs.
FEATURES
• Provides Class 2 SELV camera power, pass-through video and telemetry data
connection from four to 16 cameras, each via a single RJ45 4-pair UTP cable
• Standard telecom/datacom structured cabling pin-outs per ANSI/TIA-568-C.0
• Independently selectable 24 or 28 V AC with one amp max. per channel
8.34
• Automatic-reset fault protection, transient protection
• Individually floating outputs ensure total ground-loop immunity
• Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the
camera and passive or active receivers at the control room
• Power cameras via UTP over significant distances
• 1U high; 12 in. deep; wall-, desk- or rack-mountable
• Limited lifetime warranty
Anixter No. Vendor No.
Description
362817
NV-4PS10-PVD
4-channel
341355
NV-16PS10-PVD
16-channel
ACCESSORIES
Anixter No. Vendor No.
393093
NV-4PSRMBK
Description
Rack panel kit for 4-port
power-supply products
Hubs;Power Supply and Receiver/14214
Index1.Networking Systems//Video Products//Video Security Systems
Multichannel Power-supply Passive Receiver Hubs
NVT
PR21692V2-125568.tif
The NVT models NV-4PS13-PVD, NV-8PS13-PVD and NV-16PS13-PVD are 4-, 8- and
16-channel hybrid power supply and passive receiver hubs. Designed for installation
in the MDF/equipment room, these hubs have independently selectable 24 V
AC-OFF-28 V AC outputs that can support channel at-distance camera loads up to one
amp per channel.
FEATURES
• Provides Class 2 SELV camera power, pass-through video and telemetry data
connection from eight to 16 cameras, each via a single RJ45 4-pair UTP cable
• Standard telecom/datacom structured cabling pin-outs per ANSI/TIA-568B
• Independently selectable 24 or 28 V AC with one amp max. per channel
(10 amp aggregate)
• Automatic reset fault protection and built-in transient protection
• Individually floating outputs ensure total ground-loop immunity
• Diagnostic LEDs show load/no load, mis-wires and overload conditions
• Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the
camera and passive or active receivers at the control room
• Power cameras via UTP over significant distances
• 1U high; 12 in. deep: wall-, desk- or rack-mountable
• Limited lifetime warranty
Anixter No. Vendor No.
Description
369845
NV-4PS13-PVD
4-channel
341356
NV-8PS13-PVD
8-channel
341357
NV-16PS13-PVD
16-channel
ACCESSORIES
Anixter No. Vendor No.
393093
NV-4PSRMBK
Description
Rack panel kit for 4-port
power-supply products
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
Transceivers;Video Powered/11880
Index1.Networking Systems//Video Products//Video Security Systems
Power-video-data Integrators
NVT
PR10283V2-25118.tif
FEATURES
• Supports up to 10 individual or two 4-channel models
• Standard 19 in. wide, 2U high
• Limited lifetime warranty
Anixter No. Vendor No.
Description
368529
NV-RM8/10
Rack panel kit
Transceivers;Passive/17323
Index1.Networking Systems//Video Products//Video Security Systems
Single-channel Passive Transceivers
NVT
Transceivers;Rack-mounting/15210
Index1.Networking Systems//Video Products//Video Security Systems
Rack Panel Kit
NVT
PR21690V2-125566.tif
The NVT models NV-215J-M (RJ45) and the NV-217J-M (RJ45) transceivers are
passive (nonamplified) devices, which allow the transmission of real-time analog
video over unshielded twisted-pair (UTP) telephone wire. "Up-the-Coax" telemetry
signals are supported when used with any other passive NVT model including NVT
passive hubs.
FEATURES
• Single-channel passive transceiver with RJ45 video-signal terminal
• No power required, built-in transient protection, supports "Up-the-Coax"-type
control signal up to 750 ft.
• Transmit with another passive NVT transceiver up to 750 ft.; transmit up to
3,000 ft. if used with an DigitalEQ active receiver
• A-M = Male BNC; the NV-215J-M features a 9 in. mini-coax pigtail
• Limited lifetime warranty
Anixter No. Vendor No.
Description
422119
NV-215J-M
RJ45/male BNC with mini-coax pigtail
422120
NV-217J-M
RJ45/male BNC
For high-resolution applications, it is recommended that passive-to-passive
transmission distances be limited to no more than 750 ft. For distances
greater than 500 ft. always use an NVT active receiver product.
The NV-RM8/10 rack panel kit allows for the rack-mounting of up to
10 single-channel transceivers, such as NV-652R or NV-653T. Alternately, it can
support up to two 4-channel devices, such as NV-413A, NV-452R or NV-704J-PVD.
The NV-RM8/10 can reside on front or rear rails of the same rack as NVT hubs,
multiplexers, DVRs or encoders. This heavy-gauge panel is designed to withstand the
mechanical load of multiple coax cables. The threaded holes and screws (included)
provide easy product mounting and installation into a 19 in. rack.
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.35
Video Transmission, Media Conversion and Wireless
Typically installed in the Wiring Closet or IDF room, the NV-704J-PVD and
NV-716J-PVD are passive pass-through wiring devices that efficiently consolidate
camera power, video and pan/tilt/zoom data onto a minimum of 4-pair UTP
RJ45 cable. Power, video and data are converted at the camera using the
NV-218A-PVD or NV-216A-PV transceivers (power and video) which utilize a single
4-pair cable with RJ45 connectors to deliver each camera's signal.
FEATURES
• The NV-704J-PVD and NV-716J-PVD receive low-voltage camera power from any
third-party Class 2 power supply
• Control room connections are achieved with a single 4-pair RJ45 cable
(Exception: Two cables are required when all four cameras are in use and one or
more require data.)
• Control room connections may be made using the NV-413A, NV-452R and any
passive or active NVT hub
• All equipment employs industry-standard ANSI/TIA-568B pin-outs
Anixter No. Vendor No.
Description
299588
NV-704J-PVD
4-channel
299589
NV-716J-PVD
16-channel
PR28649V2-210284.tif
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
Receivers;Powered/17324
Index1.Networking Systems//Video Products//Video Security Systems
Power-supply StubEQ Active Receiver Hubs
Video Transmission, Media Conversion and Wireless
NVT
PR28650V2-210281.tif
The NV-8PS42-PVD and the NV-16PS42-PVD deliver up to 1 amp of individually
floating camera power and two video outputs per channel. The NV-32PS42-PVD model
provides 5 amps per channel and one video output per channel. They offer
plug-and-play analog camera power and connectivity at twice the distance of
RG-59/U, and five times the distance of PoE Ethernet.
These hubs represent the culmination of years of NVT development, providing
all-in-one delivery of camera power, auto-equalized video and P/T/Z telemetry data, all
over extended distances of 4-pair Cat 5 or Cat 6 wire. Using future-proof UTP-based
ANSI/TIA-568B structured building wiring, these hubs are designed for a fast
labor-saving installation. Depending on camera current, distances up to 1,500 feet
(450 m) are supported.
FEATURES
• Fully integrated multichannel floating (isolated) power supplies which ensure
total ground-loop immunity
• Provides 28 V DAC camera power while receiving fully equalized video
transmission and delivering P/T/Z telemetry all over a single 4-pair Cat 5e cable
• 1U rack-mount configurations
Anixter No. Vendor No.
Description
422121
NV-8PS42-PVD
8-channel, one amp/channel, two
video outputs/channel
422122
NV-16PS42-PVD
16-channel, one amp/channel, two
video outputs/channel
422123
NV-32PS42-PVD
32-channel, 0.5 amp/channel
Baluns;Passive UTP/17517
Index1.Networking Systems//Video Products//Video Security Systems
UTP Passive Baluns
INTERLOGIX
PR29025V2-215084.tif
FEATURES
• Compact size and no power required
• Plug-and-play
• Supports video and "Up-the-Coax" PTZ
• Compatible with existing UTP products
• Lifetime warranty
Anixter No. Vendor No.
425167
GEC-PVTC-M
425168
GEC-PVTC-MC
425170
GEC-PVTC-MRTSP
425171
GEC-PVTC-MCSP
425172
425174
GEC-PVTC-MSP
GEC-PVTC-FCSP
Description
Male BNC, screwless terminal
Male BNC, 9 in. coax lead
Male BNC, right angle, surge protection
Male BNC, 9 in. coax lead,
surge protection
Male BNC, surge protection
Female BNC, surge protection
Transmitters/Receivers;UTP/17518
Index1.Networking Systems//Video Products//Video Security Systems
UTP Active 1-channel Transmitters and Receivers
INTERLOGIX
Interlogix offers feature-rich 1-channel active transmitters and receivers. This series
delivers UTP transmission for distances up to 2,000, 4,000 and 6,000 ft. Without any
field adjustment, automatic video compensation delivers high-resolution video over
UTP. The active receiver paired with a passive balun will transmit video up to 2,000 ft.
Use the active transmitter and active receiver for 4,000 ft. To achieve 6,000 ft. on
UTP, use the active transmitter with active receiver series designed for 6,000 ft.
FEATURES
• Built-in video compensation to deliver high-resolution video
• Plug-and-play
• Ground loop immunity
• Built-in surge protection
• Lifetime warranty
• 12 V DC power supply, sold separately
Anixter No. Vendor No.
Description
424731
PS12VDC1.5A-U
Power supply, wall-mount universal,
12 V DC 1.5 amp
425175
GEC-1AVT
1-channel active video transmitter
425176
GEC-1AVR-AVC-4
1-channel active receiver, up to
4,000 feet
Interlogix offers a complete line of passive baluns and combiners. Compact design
and broad product range are designed to meet every video-signal application.
Capable of transmitting video up to 750 feet with no power. Use active receivers for
distances up to 3,000 feet. Built-in surge protection available on select models.
8.36
PR29026V2-215095.tif
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CCTV (Coax) over UTP - Baseband Video
Hubs;Multichannel/17519
Combiners;UTP/17520
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
UTP Multichannel Hubs
UTP Video, Data, Power Combiners
INTERLOGIX
PR29027V2-215105.tif
UTP MULTICHANNEL PASSIVE HUBS
Anixter No. Vendor No.
425177
GEC-4VPHUB
425179
GEC-8VPHUB
425180
GEC-16VPHUB
425181
GEC-32VPHUB
424731
PS12VDC1.5A-U
UTP MULTICHANNEL ACTIVE HUBS
Anixter No. Vendor No.
425185
GEC-8VARHUB-4
425186
GEC-16VARHUB-4
425188
GEC-32VARHUB-4
425189
GEC-8VARHUB-6
425190
GEC-16VARHUB-6
425192
GEC-32VARHUB-6
424731
PS12VDC1.5A-U
Description
4-channel passive hub
8-channel passive hub, 1U rack-mount
16-channel passive hub,
1U rack-mount
32-channel passive hub,
1U rack-mount
Power supply, wall-mount universal,
12 V DC 1.5 amp
Description
8-channel active hub, 4,000 feet max.
1U rack-mount
16-channel active hub, 4,000 feet max.
1U rack-mount
32-channel active hub, 4,000 feet max.
1U rack-mount
8-channel active hub, 6,000 feet max.
1U rack-mount
16-channel active hub, 6,000 feet max.
1U rack-mount
32-channel active hub, 6,000 feet max.
1U rack-mount
Power supply, wall-mount universal,
12 V DC 1.5 amp
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
PR29028V2-215108.tif
Simplify CCTV design and installations over a single UTP cable. Combiners transmit
video and receive data and power. This product series lowers the cost of wiring by
using one cable to the camera and combining multiple camera runs into one cable.
Increased system reliability is achieved by using the built-in isolated central power
supply and self-resetting fuses.
FEATURES
• Built-in video compensation to deliver high-resolution video
• Plug-and-play
• Ground loop immunity
• Built-in surge protection
• 8-channel camera power supply 24 V AC, 6 amp
• 16-channel camera power supply 24 V AC, 12 amp
• Lifetime warranty
Anixter No. Vendor No.
Description
425193
GEC-VCR
1-channel combiner, video balun and
power receiver
425194
GEC-VCR12V
1-channel combiner, video balun and
power receiver, plus 12 V DC converter
425196
GEC-VPDBC
1-channel combiner, video balun, data/
power receiver
425199
GEC-4VDPC
4-channel video, data/power combiner
425200
GEC-4VDPBC
4-channel video balun and data/
power combiner
425201
GEC-8VPDCHUB
8-channel power supply plus
VDP combiner
425202
GEC-8PVPDTCHUB
8-channel power supply, VDP combiner,
and 8-channel video balun
425204
GEC-16VDPC
16-channel video, data/
power combiner
425205
GEC-16VDPBC
16-channel video balun and data/
power combiner
425206
GEC-16VPDCHUB
16-channel power supply plus
VDP combiner
425207
GEC-16PVPDTCHUB
16-channel power supply, VDP
combiner, and 16-channel video balun
8.37
Video Transmission, Media Conversion and Wireless
The UTP Multichannel Hub series offers a broad range of products. The series offers
passive and active hubs. Compatible with most existing UTP transmitters. Passive
hubs transmit video up to 750 feet. The active hub series offers built-in video
compensation for a perfect picture quality transmitting to the maximum distance
rating of each unit.
FEATURES
• Built-in video compensation to deliver high-resolution video
• Plug-and-play
• Ground loop immunity
• Built-in surge protection
• Lifetime warranty
• 12 V DC power supply, sold separately
INTERLOGIX
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
CATV (Coax) over UTP - Broadband Video
./Baluns;CATV/14196
Baluns;CATV/18191
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
CATV Balun II
Video Transmission, Media Conversion and Wireless
MUXLAB INC
Shielded CATV Balun
PR28480V2-208827.tif
The CATV Balun II allows traditional 75 ohm coaxial cable to be replaced by a single
pair of Cat 5 UTP cable in the CATV, VHF and FM environments in certain applications.
Used in pairs, the CATV Balun II allows broadband CATV equipment to be integrated
into structured cabling systems, thereby allowing CATV equipment to be moved or
added to any convenient modular wall outlet. The CATV Balun II provides a versatile
cabling solution for broadband video systems used by schools, government, offices,
hospitals, financial institutions, hotels and residential complexes. The CATV Balun II
works in conjunction with RF splitters, combiners, amplifiers and cable modems for a
total cabling solution.
FEATURES
• Supports broadband Internet and digital cable
• High bandwidth - up to 900 MHz
• Low insertion loss
• Compact design
Anixter No. D Vendor No.
Description
324952
500302
CATV Balun II
324952-PK 500302-2PK
CATV Balun II, pack of two
Hubs;CATV Distribution/15050
Index1.Networking Systems//Video Products//Video Security Systems
CATV Distribution Hub
MUXLAB INC
MUXLAB INC
The Shielded CATV Balun (500306) allows RG-6 coaxial cable to be replaced by
Cat 5e/6/7 STP or UTP cable in the terrestrial RF environment. Used in pairs, the
Shielded CATV Balun allows broadband CATV equipment to be integrated into a
structured cabling system thereby allowing CATV equipment to be moved or added to
any convenient modular wall outlet. When used with Cat 5e/6/7 shielded twisted-pair
cable, the connection supports greater RF ampliflication and therefore greater
distance with less EMI/RFI egress versus other UTP CATV baluns. The Shielded CATV
Balun also works in conjunction with MuxLab's CATV Hub (500300/303) for a total
cabling solution.
FEATURES
• Bandwidth up to 860 MHz including Internet, digital cable
• Supports Cat 5e/6/7 STP and UTP
• Fits side-by-side on most RF splitters
• Lower EMI /RFI egress when STP is used
• Cast-aluminum enclosure for maximum EMI/RFI shielding
• Low insertion loss
Anixter No. Vendor No.
Description
450005
500306
Shielded CATV Balun
PR21736V2-125809.tif
The CATV Distribution Hub allows terrestrial broadband RF video to be distributed to
multiple RF receivers via Cat 5 unshielded twisted-pair cable. The CATV Hub also
features built-in gain amplification, port buffering and works in conjunction with
MuxLab's passive CATV Balun (500302) and other RF video equipment for a complete
RF cabling solution.
FEATURES
• 900 MHz bandwidth
• Supports CATV, Internet, digital cable
• Built-in RF amplifier
• Bi-directional transmission
Anixter No. Vendor No.
Description
366584
500300
8-port hub, desktop
366595
500303
16-port hub, rack-mount
8.38
PR35132V2-268878.tif
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
./Kits;HD-SDI-Extender/18190
Baluns;Audio/Video/15054
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
HD-SDI Extender Kit
MUXLAB INC
Stereo Audio-Video Balun
PR35122V2-269398.tif
PR23774V2-167862.tif
The Stereo Audio-Video Balun allows a single composite video signal and a maximum
of two unbalanced audio signals to be transmitted via unshielded twisted-pair (UTP)
cable in a point-to-point connection.
FEATURES
• Cost-effective cabling
• Up to 2,200 ft. (670 m) in color via Cat 5 UTP
• Includes one 9 in. coax (BNC/BNC) jumper cable
Anixter No. Vendor No.
Description
275874
500001
Stereo Audio-Video Balun
Baluns;Audio/Video/12709
Index1.Networking Systems//Video Products//Video Security Systems
Quad Video Balun
MUXLAB INC
PR23765V2-167871.tif
Baluns;Audio/Video/11877
Index1.Networking Systems//Video Products//Video Security Systems
Audio-Video Distribution Hub
MUXLAB INC
PR10226V2-13937.tif
The Audio-Video Distribution Hub allows up to two composite video signals or one
S-Video signal and up to two analog audio signals to be distributed to up to eight
locations via twisted-pair cable for more cost-efficient cabling. Ideal for classrooms,
auditoriums, digital signage, trade shows and multimedia venues.
FEATURES
• Cascadable up to 72 displays via looping output port
• Composite video up to 2,200 ft. (670 m) via Cat 5
• S-Video up to 1,000 ft. (300 m) in color via Cat 5
• Supports NTSC, PAL and SECAM
• Works in conjunction with MuxLab parts: 500000, 500001, 500009, 500012,
500016, 500017, 500019, 500021, 500023
Anixter No. Vendor No.
Description
275882
500200
110 V
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
The Quad Video Balun allows up to four composite video signals to be transmitted via
unshielded twisted-pair (UTP) cable in a point-to-point connection. Used in pairs, the
Quad Video Balun eliminates up to four coaxial cables, allowing video equipment to
be connected via space-efficient and cost-effective Category 5 twisted-pair cable.
The Quad Video Balun also works in conjunction with other MuxLab composite video
baluns such as the 500000, 500009 and 500021.
FEATURES
• Cost-efficient - replaces up to four coax cables
• Composite video up to 2,200 ft. (670 m) via Cat 5
• Component video up to 500 ft. (152 m) via Cat 5
• Compact design for neater wiring
Anixter No. Vendor No.
Description
315571
500032
Quad Video Balun, RCA
8.39
Video Transmission, Media Conversion and Wireless
The HD-SDI Extender Kit allows HD-SDI to be transmitted up to 330 ft. (100 m) via
Cat 5e cable at all resolutions in a point-to-point configuration. The HD-SDI Extender
Kit supports transmission of up to 2.97/3.0 Gbps uncompressed, un-encrypted
digital video (optionally including embedded Audio and/or Time Code) within
television facilities and between professional video equipment.
FEATURES
• Up to 330 ft. (100 m) via Cat 5e cable
• Up to 400 ft. (122 m) via Cat 6 cable
• Supports SDI-SMPTE 259M-C (270 Mbps), HD-SDI-SMPTE 292M (1.485, 1.485/
1.001 Gbps) and HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
• LED diagnostics: Sync, SDI detect
Anixter No. Vendor No.
Description
449997
500700
HD-SDI Extender Kit
MUXLAB INC
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
Baluns;Audio/Video/12710
Converters;PS/2/12713
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Quad Audio Balun
Video Transmission, Media Conversion and Wireless
MUXLAB INC
PS/2 Converter
PR23764V2-167888.tif
The Quad Audio Balun allows up to four analog line audio signals to be transmitted
via unshielded twisted-pair (UTP) cable in a point-to-point connection. Used in pairs,
the Quad Audio Balun allows up to four coax audio cables to be replaced by one
Cat 5 cable. The Quad Audio Balun also works in conjunction with other MuxLab
analog audio baluns such as the 500019.
FEATURES
• Cost-efficient cabling - save up to four cables
• Analog audio up to 5,000 ft. (1.5 km) via Cat 5
• Compact design for neater wiring
Anixter No. Vendor No.
Description
315573
500033
Quad Audio Balun
Baluns;Audio/Video/11874
Index1.Networking Systems//Video Products//Video Security Systems
D
Analog Audio Balun
MUXLAB INC
PR10222V2-13925.tif
MUXLAB INC
PR23757V2-167826.tif
The PS/2 Converter allows a standard PS/2 keyboard and mouse to be connected to a
PC up to 350 ft. away (106 m) via Cat 5 unshielded twisted-pair cable in a
point-to-point configuration. There are two models: 500045 and 500046. Both
models work in pairs or in conjunction with each other for maximum cabling
flexibility. The 500045 is designed to connect easily to a PS/2 keyboard and mouse.
The 500046 is designed to connect easily to the PC.
FEATURES
• Color-coded cable leads
• Compact design
Anixter No. Vendor No.
Description
321078
500045
PS/2 Converter - PS/2-receptacle,
keyboard/mouse side
321079
500046
PS/2 Converter - PS/2-plug,
PC/server side
330850
500047
PS/2 Converter Kit 500045 and 500046
Baluns;Audio/14191
Index1.Networking Systems//Video Products//Video Security Systems
Stereo Audio Balun
MUXLAB INC
The Analog Audio Balun allows any 75 ohm unbalanced analog audio signal to be
transmitted via a single unshielded twisted-pair (UTP) cable for more cost-efficient
cabling. Ideal for auditoriums, arenas, schools, home theatre systems, airports,
hotels, hospitals and conference rooms.
FEATURES
• Up to 5,000 ft. (1.5 km) via Cat 5 UTP
• 40 to 20 kHz bandwidth
• Gold-plated RCA connector
• Cable strain relief
• Compact design
Anixter No. Vendor No.
Description
275869
500019
Analog Audio Balun, RCA to
screw terminal
8.40
PR28488V2-208807.tif
The Stereo Audio Balun allows unbalanced line level stereo analog audio
to be transmitted via Cat 5 unshielded copper twisted pair (UTP) in a
point-to-point connection.
The product is designed for audio applications where primarily midrange
audio-frequency response is required.
FEATURES
• Cost-efficient cabling
• Up to 5,000 ft. (1.5 km) via Cat 5 UTP
• Color-coded RCA cable leads
• Quicker moves, adds and changes
• Compact design
Anixter No. Vendor No.
Description
339724
500027
Stereo Audio Balun
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
Baluns;Audio/14192
Baluns;HDMI/17206
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Stereo Hi-Fi Balun
MUXLAB INC
HDMI Econo Plus Extender Kit
PR23766V2-167889.tif
PR28489V2-208804.tif
The HDMI Econo Plus Extender Kit (500401) allows HDMI equipment to be connected
up to 90 ft. (27 m) via two Cat 5e unshielded twisted-pair cables in a point-to-point
configuration at 1080p Deep Color (12-bit) resolution. The kit comes with one
transmitter and one receiver. The product is the upgrade replacement to the 500400.
FEATURES
• Up to 150 ft. (45 m) at 1080p via Cat 5e
• Up to 90 ft. (27 m) at 1080p Deep Color via Cat 6
• Connect via two Cat 5e cables
• Compact design
Anixter No. Vendor No.
Description
414602
500401
HDMI Econo Plus Extender Kit
Baluns;HDMI/17393
Index1.Networking Systems//Video Products//Video Security Systems
HDMI IR/Extender Kit
Baluns;Audio/14194
Index1.Networking Systems//Video Products//Video Security Systems
Stereo Hi-Fi/Video Balun
MUXLAB INC
MUXLAB INC
PR28768V2-211818.tif
PR23762V2-167850.tif
The Stereo Hi-Fi/Video Balun (500039) allows a single composite video signal to be
transmitted via unshielded twisted-pair (UTP) cable up to 2,200 ft. (670 m) in a
point-to-point connection. The Stereo Hi-Fi/Video Balun features full audio bandwidth
response for hi-fidelity applications and features built-in color-coded cable leads for
ease of installation.
FEATURES
• 20 Hz to 20 kHz audio bandwidth
• Compact design for neater wiring
• Lifetime warranty
Anixter No. Vendor No.
Description
339734
500039
Stereo Hi-Fi/Video Balun
502813
500039-2PK
Stereo Hi-Fi/Video Balun, pack of two
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
The HDMI IR/Extender Kit (500405) allows HDMI equipment to be connected up to
300 ft. (91 m) via two Cat 5e/6 unshielded twisted-pair cables in a point-to-point
configuration at 1080i resolution. The product also supports 1080p Deep Color up to
150 ft. (46 m) via two Cat 6 cables. The kit includes one transmitter, one receiver,
one IR Emitter, one IR Sensor and two power supplies. The transmitter (500406) and
receiver (500407) are also sold separately. Replacement IR Emitter (500998) and IR
Sensor (500999) may be ordered.
FEATURES
• Up to 150 ft. (46 m) at 1080p deep color via Cat 6
• Up to 300 ft. (91 m) at 1080i via Cat 5e/6
• Connect via two Cat 5e/6 cables
• Includes IR Emitter and IR Sensor
Anixter No. Vendor No.
Description
423710
500406
HDMI IR/Transmitter
423714
500407
HDMI IR/Receiver
420840
500405
HDMI, IR Extender Kit
8.41
Video Transmission, Media Conversion and Wireless
The Stereo Hi-Fi Balun allows unbalanced line level stereo analog audio to be
transmitted via Cat 5 unshielded copper twisted pair (UTP) in a point-to-point
connection. The product is designed for audio applications where full-range,
hi-fidelity audio-frequency response is required.
FEATURES
• 20 Hz to 20 kHz bandwidth
• Cost-efficient cabling
• Up to 3,250 ft. (1 km) via Cat 5 UTP
• Color-coded RCA cable leads
• Quicker moves, adds and changes
Anixter No. Vendor No.
Description
339731
500028
Stereo Hi-Fi Balun
MUXLAB INC
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
Hubs;HDMI/17394
Index1.Networking Systems//Video Products//Video Security Systems
HDMI 1x4 Distribution Hub
MUXLAB INC
PR28770V2-211829.tif
FEATURES
• Video up to 2,200 ft. (670 m) via Cat 5e/6
• Audio up to 3,250 ft. (990 m) via Cat 5e/6
• 20 Hz to 20 kHz audio bandwidth
• IR 2-wire emitter pass-thru on fourth twisted pair
• Built-in color-coded cable leads
• Lifetime warranty
Video Transmission, Media Conversion and Wireless
PR23755V2-167841.tif
The HDMI 1x4 Distribution Hub (500420) allows one HDMI source to be distributed to
up to four HDMI displays via two Cat 5e/6 cables. The product supports up to 150 ft.
(46 m) at 1080p/8-bit via Cat 5e cable on either side of the hub. The product
supports remote IR control and works in conjunction with the HDMI IR/Extender
(500405 [kit], 500406 [Tx] and 500407 [Rx]).
FEATURES
• Supports Cat 5e/6 on input and output sides
• Up to 150 ft. (46 m) at 1080p via two Cat 5e
• Up to 300 ft. (91 m) at 1080i via two Cat 5e
• Up to 150 ft. (46 m) at 1080p deep color via Cat 6
• Cascadable
• Local HDMI output
• Includes one IR Emitter for IR source control
• EDID configuration switch
Anixter No. Vendor No.
394253
500048
394254
500049
Description
Stereo AV/ IR Pass-Thru Balun, M
Stereo AV/IR Pass-Thru Balun, F
Baluns;Audio/16066
Index1.Networking Systems//Video Products//Video Security Systems
Stereo PC-Audio Balun
MUXLAB INC
PR23323V2-163229.tif
PR28769V2-211826.tif
D
Anixter No. Vendor No.
423716
500420
Description
HDMI 1x4 Distribution Hub
Baluns;Audio/16067
Index1.Networking Systems//Video Products//Video Security Systems
Stereo AV/IR Pass-Thru Balun
MUXLAB INC
PR23756V2-167842.tif
The Stereo AV/IR Pass-Thru Balun (500048, 500049) allows one composite video, one
stereo audio and one IR emitter signal to be transmitted via a single Cat 5e/6 cable in
a point-to-point connection. The Stereo AV/IR Pass-Thru Balun features full audio
bandwidth response for high-fidelity applications and features built-in color-coded
cable leads for ease of installation.
8.42
The Stereo PC-Audio Balun allows unbalanced line level stereo analog audio to be
transmitted via Category 5/6 unshielded copper twisted pair (UTP) in a point-to-point
connection. The product is designed for audio equipment with 3.5 mm line-level
stereo output such as PC sound cards, laptops and multimedia servers where
midrange audio-frequency response is required. The Stereo PC-Audio Balun also
works in conjunction with other MuxLab products such as the 500019, 500001,
500012, 500017, 500027, 500028 and 500200 for a more complete
cabling solution.
FEATURES
• Cost-efficient cabling
• Up to 5,000 ft. (1.5 km) via Cat 5/6 UTP
• Built-in 3.5 mm stereo plug lead
• Quicker moves, adds and changes
• Compact design
Anixter No. Vendor No.
Description
394252
500030
Stereo PC-Audio Balun
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
Baluns;Audio/Video/17211
Index1.Networking Systems//Video Products//Video Security Systems
Component Video/Stereo Audio Wall Plate Balun - US
MUXLAB INC
PR28497V2-208790.tif
• DDC1/DDC2 (plug-and-play)-compliant
• Local VGA/audio monitor output
• Ground loop isolation
Anixter No. Vendor No.
Description
420945
500145
Active VGA/Audio Balun kit (includes
1 Tx and 1 Rx)
Baluns;Audio/Video/17213
Index1.Networking Systems//Video Products//Video Security Systems
VGA 4x1 Switcher
MUXLAB INC
Baluns;Audio/Video/17212
Index1.Networking Systems//Video Products//Video Security Systems
Active VGA/Audio Balun Kit
MUXLAB INC
PR28498V2-208787.tif
The VGA 4x1 Switcher allows up to four VGA (RGBHV) sources to be switched to one
display via Cat 5e/6 cable for more cost-efficient cabling. The switcher works in
conjunction with the Active VGA Balun II (500140) and Active VGA Balun II Transmitter
(500141). At least one 500140 is required to support one source and one display. Up
to three additional 500141 may be added to support up to three additional sources.
FEATURES
• Auto and Manual switching modes
• Control via: manual, IR, RS-232 and USB
• Plug-and-play - DDC1-compliant
• Remote power up to 150 ft. (46 m)
• Modular RJ45 on input and output
• Supports up to 1,920x1,440, 1080p
• Includes GUI software and IR remote
• Works in conjunction with 500140/141/142
• May be cascaded with VGA 1x4 Hub (500150)
Anixter No. Vendor No.
Description
420947
500160
VGA 4X1 Switcher, 110 V
The Active VGA/Audio Balun Kit (500145) allows VGA and stereo or digital audio to be
transmitted via cost-efficient unshielded copper twisted-pair cable in a
point-to-point configuration. The product also supports RS-232, is DDC-compliant
and works in conjunction with MuxLab's IR Emitter (500998) and IR Sensor (500999)
to support IR source control. Tx and Rx also sold separately. The product supports up
to 1,920x1,200 resolution and features manual brightness, sharpness and skew
adjustments. Applications include: digital signage, residential, boardroom,
classroom and medical-imaging video systems.
FEATURES
• Up to 600 ft. (180 m) via Cat 5e/6 at 1,920x1,200
• Supports analog stereo or digital audio
• Supports RS-232 or IR control
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.43
Video Transmission, Media Conversion and Wireless
The Component Video/Stereo Audio Wall Plate Balun (500058-WP-US) allows one
component video (YPbPr or RGB) signal and one Stereo Audio channel to be
transmitted via one Cat 5e/6 twisted-pair cable for more cost-efficient cabling. The
product fits Decora compatible outlet boxes for neater wall-mount installation. Used
in pairs or in conjunction wih the 500058, the Component Video/Stereo Audio Balun
supports high-definition resolution and true left/right stereo audio for hi-fidelity
commercial and residential A/V applications.
FEATURES
• Supports true Hi-Fi left/right analog stereo audio ground loop coupling (GLC)
(U.S. patent pending)
• Decora compatible wall plate standard
• Modular shielded RJ45 connector
• Not compatible with 500050/51/52/53/54/55/56/57/250/251/252/253
Anixter No. Vendor No.
Description
420923
500058-WP-US
Component Video/Stereo Audio Wall
Plate Balun
PR28499V2-208784.tif
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
Baluns;Audio/17214
Index1.Networking Systems//Video Products//Video Security Systems
Stereo AV/IR Pass-Thru Wall Plate Balun - US
MUXLAB INC
PR28500V2-208781.tif
FEATURES
• Line analog audio up to 5,000 ft. (1.5 km) via Cat 5
• Digital audio up to 1,400 ft. (426 m) via Cat 5e/6 UTP
• Wires terminate inside balun
• Locking XLR3 connector
• Heavy-duty cable strain relief
• Supports UTP or STP
Video Transmission, Media Conversion and Wireless
PR28501V2-208778.tif
The Stereo AV/IR Pass-Thru Wall Plate Balun (500049-WP-US) allows one composite
video, one stereo audio and one IR emitter signal to be transmitted via a single
Cat 5e/6 cable in a point-to-point connection. The Stereo AV/IR Pass-Thru Wall Plate
Balun features full audio bandwidth response for high-fidelity applications and is
Decora compatible. The Stereo AV/IR Pass-Thru Wall Plate Balun works in pairs or in
conjunction with the 500048 or 500049. Some of the applications are: classroom
video distribution, commercial and home audio/video systems, hospital video
training, videoconferencing and video kiosks.
FEATURES
• Video up to 2,200 ft. (670 m) via Cat 5e/6
• Audio up to 3,250 ft. (990 m) via Cat 5e/6
• 20 Hz to 20 kHz audio bandwidth
• IR 2-wire emitter pass-thru on fourth twisted pair
D
• Built-in color-coded
cable leads
• Compatible with Decora face plates
Anixter No. Vendor No.
Description
420948
500049-WP-US
Stereo AV/IR Pass-Thru Wall Plate Balun
Anixter No. Vendor No.
306927
500025
306928
500026
Description
XLR3M
XLR3F
Baluns;Audio/18184
Index1.Networking Systems//Video Products//Video Security Systems
Stereo Hi-Fi Wall Balun
MUXLAB INC
PR35127V2-268877.tif
Baluns;Audio/17215
Index1.Networking Systems//Video Products//Video Security Systems
MonoPro XLR
MUXLAB INC
PR28502V2-208775.tif
The MonoPro XLR (500025, 500026) allows a standard AES analog or digital audio
channel to be connected via Cat 5e/6 unshielded twisted-pair cable (UTP) for the
professional audio environment. The product features heavy-duty cable strain relief
for rugged environments such as rental and staging and is available with male or
female locking XLR3 connectors for added cabling versatility. May also be used as a
solderless connection point for standard shielded audio cable.
8.44
The Stereo Hi-Fi Wall Balun (500028-WP-US) allows unbalanced line level stereo
analog audio to be transmitted via Category 5e/6 unshielded copper twisted pair
(UTP) in a point-to-point connection. The product is designed for audio applications
where full-range, high-fidelity audio frequency response is required.
FEATURES
• 20 Hz to 20 kHz bandwidth
• Cost-efficient cabling
• Up to 3,250 ft. (1 km) via Cat 5e/6 UTP
• Quicker moves, adds and changes
• Compatible with Decora face plates
Anixter No. Vendor No.
Description
448597
500028-WP-US
Stereo Hi-Fi Wall Balun
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
• Ethercon RJ45 connector for cable strain relief
• Compatible with 500052, 500052-WP
Baluns;Audio/Video/18185
Index1.Networking Systems//Video Products//Video Security Systems
Quad Audio Wall Balun
PR81974V2-588120.tif
MUXLAB INC
PR35128V2-268875.tif
Anixter No. Vendor No.
448605
500052-PRO-BNC
448606
500052-PRO-RCA
Description
With BNC-M
With RCA-M
Baluns;Audio/Video/18188
Index1.Networking Systems//Video Products//Video Security Systems
Component/Composite Video ProAV Balun
MUXLAB INC
PR81976V2-588132.tif
Baluns;Audio/Video/18187
Index1.Networking Systems//Video Products//Video Security Systems
Component Video/Analog Audio ProAV Balun
MUXLAB INC
PR81975V2-588126.tif
The Component Video/Analog Audio ProAV Balun (500052-Pro) allows one component
video (YPbPr or RGB) signal and one combined left/right analog audio signal to be
transmitted via one Cat 5e/6 twisted-pair cable for more cost-efficient cabling. The
500052-Pro features Ethercon - RJ45, ruggedized cast-aluminum enclosure and
built-in 12 in. (30 cm) heavy-duty A/V cable leads for the demanding professional
environment. The 500052-Pro may be used in pairs or in conjunction with other
MuxLab component video baluns.
FEATURES
• Supports 1080i/p up to 500 ft. (152 m) via Cat 5e/6
• Supports analog audio on fourth twisted pair
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
The Component/Composite Video ProAV Balun (500056-Pro) allows one component
video (YPbPr or RGB) signal plus one composite video signal to be transmitted via one
Cat 5e/6 twisted-pair cable for more cost-efficient cabling. The 500056-Pro features
Ethercon - RJ45, ruggedized cast-aluminum enclosure and built-in 12 in. (30 cm)
heavy-duty A/V cable leads for the demanding professional environment. The
500056-Pro may be used in pairs or in conjunction with other MuxLab component
video baluns.
FEATURES
• Supports 1080i/p up to 500 ft. (152 m) via Cat 5e/6
• Supports composite video on fourth twisted pair
• Ethercon - RJ45 connector for cable strain relief
• Compatible with 500056
Anixter No. Vendor No.
Description
448607
500056-PRO
Component/Composite Video
ProAV Balun
8.45
Video Transmission, Media Conversion and Wireless
The Quad Audio Wall Balun (500033-WP-US) allows up to four analog line audio
signals to be transmitted via unshielded twisted-pair (UTP) cable in a point-to-point
connection. Used in pairs, the Quad Audio Wall Balun allows up to four coax audio
cables to be replaced by one Cat 5e/6 cable. The Quad Audio Balun also works in
conjunction with other MuxLab analog audio baluns such as the 500019.
FEATURES
• Cost-efficient cabling - save up to four cables
• 20 Hz to 20 kHz bandwidth for high fidelity
• Analog audio up to 3,250 ft. (1.0 km) via Cat 5e/6
• Compact design for neater wiring
• Compatible with Decora faceplates
Anixter No. Vendor No.
Description
448600
500033-WP-US
Quad Audio Wall Balun
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
Switches;HDMI/18192
Converters;Digital Audio/18491
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
HDMI 4x4 Cat 5e/6 Matrix Switch
Video Transmission, Media Conversion and Wireless
MUXLAB INC
Digital Audio Converter, LPCM
PR35123V2-269400.tif
The HDMI 4x4 Matrix Switch (500415) allows up to four different HDMI sources to be
connected and/or distributed to up to four HDMI displays via Cat 5e/6 unshielded
twisted-pair cables. The product works in conjunction with MuxLab's HDMI IR/
Receivers (500407 or 500417) supporting up to 150 ft. (45 m) at 1080p Deep Color
via Cat 5e cable.
FEATURES
• HDMI 1.3a 4x4 matrix via two Cat 5e/6
• Control options: Manual, IR, USB, GUI, Web
• Up to 150 ft. (45 m) at 1080p/8-bit via Cat 5e
• Up to 90 ft. (27 m) at 1080p/12-bit via Cat 5e
• Supports IR matrix and source control
• Includes four IR emitters plus wireless remote
Anixter No. D Vendor No.
Description
450006
500415
HDMI 4x4 Cat 5e/6 Matrix Switch
Receivers;HDMI/18193
HDMI IR Receiver with Source Control
Systems;Digital Signage/18495
Index1.Networking Systems//Video Products//Video Security Systems
Active VGA Managed System
PR81984V2-588180.tif
PR35133V2-268868.tif
The HDMI IR/Receiver with Source Control (500417) allows any HDMI source to be
selected via MuxLab's HDMI 4x4 Matrix Switch from the remote display. Also, the
product features an IR jack to allow the HDMI source to be controlled. The product
supports 1080p Deep Color up to 150 ft. (46 m) via two Cat 6 cables.
FEATURES
• Up to 150 ft. (46 m) @ 1080p Deep Color via Cat 6
• Up to 300 ft. (91 m) @ 1080i via Cat 5e/6
• Connect via two Cat 5e/6 cables
• Includes IR Sensor and handheld remote
• Push-button control
Anixter No. Vendor No.
Description
450007
500417
HDMI IR Receiver with Source Control
8.46
PR81977V2-588138.tif
The Digital Audio Converter, LPCM (500080) converts one LPCM-encoded coaxial
(S/PDIF) or optical (TOSLink) digital audio signal to a standard left/right analog audio
output, thereby allowing a digital audio source such as a DVD or CD player without
RCA analog audio output to be connected to an audio-video receiver or TV.
FEATURES
• Converts 2-channel LPCM digital audio to left/right analog audio
• Switch selects between TOSLink and S/PDIF inputs
• May be used with MuxLab mounting accessories
• TOSLink cable included
• RCA cables not included
Anixter No. Vendor No.
Description
502932
500080
Digital Audio Converter, LPCM
MUXLAB INC
Index1.Networking Systems//Video Products//Video Security Systems
MUXLAB INC
MUXLAB INC
The Active VGA Managed System (AVM) is a total cabling solution that allows
digital signage systems to be installed and managed more efficiently via a
Cat 5e/6 structured cabling system. The solution is comprised of four components;
Active VGA Managed Dispatcher Hub, Active VGA Managed Repeater Hub, active VGA
Managed Receiver and MuxLab Control Software. When used together AVM allows a
network of over 256 displays to be driven up to 2,000 ft. (610 m) from a single
VGA/Audio source. AVM allows picture gain and skew to adjust at each receiver and
custom scripts may be sent to each displays to control time of day on/off.
FEATURES
• Dispatcher Hub (500170, 500171) distributes up to eight or 16 displays
• Repeater Hub (500172) adds 1,000 ft. (305 m) and distributes to eight
more receivers
• Receiver (500174) supports dual VGA output and VESA mounting
• Manual and software gain/skew control
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
A/V over UTP - Component, HDMI, VGA, S-Video, SDI
• MuxLab Control Software for gain/skew and display scripts Control via GUI,
RS-232 and Web
• All manuals and software must be downloaded from MuxLab website
Anixter No. Vendor No.
Description
502945
500170
Dispatcher Hub, 8-port
502946
500171
Dispatcher Hub, 16-port
502947
500172
Repeater Hub, 8-port
502948
500174
Receiver Dual Head
Kits;HDMI/18496
Kits;HD-SDI Fiber Extender/18498
Index1.Networking Systems//Video Products//Video Security Systems
HD-SDI Fiber Extender Kit
MUXLAB INC
Index1.Networking Systems//Video Products//Video Security Systems
HDMI Passive Extender Kit
MUXLAB INC
• Supports SDI-SMPTE 259M-C (270 Mbps) HDSDI-SMPTE 292M (1.485, 1.485/
1.001 Gbps)
• HD-SDI-SMPTE 424M/425M (2.97/3.0 Gbps)
• LED diagnostics: sync, SDI detect
Anixter No. Vendor No.
Description
449997
500700
HD-SDI Extender Kit
PR81987V2-588198.tif
PR81985V2-588186.tif
Kits;HD-SDI Extender/18497
Index1.Networking Systems//Video Products//Video Security Systems
HD-SDI Extender Kit
MUXLAB INC
PR81986V2-588192.tif
The HD-SDI Extender Kit allows HD-SDI to be transmitted up to 330 ft. (100 m) via
Cat 5e cable at all resolutions in a point-to-point configuration.
FEATURES
• Up to 330 ft. (100 m) via Cat 5e cable
• Up to 400 ft. (122 m) via Cat 6 cable
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.47
Video Transmission, Media Conversion and Wireless
The HDMI Passive Extender Kit (500402) allows HDMI equipment to be connected up
to 100 ft. (30 m) via two Cat 5e unshielded twisted pair cables in a point-to-point
configuration at 1080p resolution.
FEATURES
• HDMI 1.4
• Up to 100 ft. (30 m) at 1080p via Cat 5e
• Up to 150 ft. (45 m) at 1080p via Cat 6
• Connect via two Cat 5e/6 cables
• No external power required
• Supports HDMI 3D
• Works with Deep Color equipment
Anixter No. Vendor No.
Description
473460
500402
HDMI Passive Extender Kit
The HD-SDI Fiber Extender Kit (500710) allows HD-SDI to be transmitted up to
1,000 ft. (300 m) via one multimode fiber or 19 mi (30 km) via one single-mode fiber
in a point-to-point configuration.
FEATURES
• Supports up to 3G-SDI
• LED diagnostics: Power, SDI presence
• Includes Hirose power cable
• Includes hard plastic carry case
Anixter No. Vendor No.
Description
502987
500710
HD-SDI Fiber Extender Kit
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
Accessories
./Chassis;Rackmount/15058
Fixtures;Wall-mount Balun/15059
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Rackmount Balun Chassis 16
Video Transmission, Media Conversion and Wireless
MUXLAB INC
Wall Mount Balun Fixture
PR21538V2-122491.tif
The Rackmount Balun Chassis 16 is designed as a headend cable-management
solution to allow any combination of MuxLab square baluns to be installed in a 19 in.
relay rack. Headend A/V equipment such as DVD players, video servers and satellite
boxes may be installed in a local wiring closet and connected to the Cat 5 structured
cabling system via a wide array of MuxLab balun solutions.
The panel is custom-tailored to allow any combination of up to 16 MuxLab baluns to
be installed. The baluns may be installed with the RJ45 either front- or rear-facing,
depending on where the Cat 5 cabling will enter or exit the system. At the display end,
the appropriate MuxLab baluns are installed at the display to support a fully
Cat 5 cabling solution. Each balun snaps into place and is held firmly by a spring
latching mechanism. The one-piece design makes the product easy to install and
maintain. There are no parts to lose or replace.
FEATURES
D
• Space-efficient - 2U height
• One-piece design
• Latching mechanism for secure installation
• Supports up to 16 baluns
• Snap-in design for ease of installation
• Baluns install forward- or rear-facing
• Includes four rack-mount screws and washers
• Slot number silkscreen on front and rear
• Blank Filler Modules (500901) sold separately
Anixter No. Vendor No.
Description
349055
500900
Rackmount Balun Chassis 16
8.48
MUXLAB INC
PR21539V2-122492.tif
The Wall Mount Balun Fixture (500910) allows any MuxLab square balun to be
installed behind a Decora compatible wall plate for custom A/V installation. The
baluns may be installed with the RJ45 either front- or rear-facing depending on where
the Cat 5 cabling will enter or exit the system. At the headend, the appropriate
MuxLab baluns are installed near the equipment to support a fully Cat 5 cabling
solution. Each balun snaps into place and is held firmly by a spring latching
mechanism. The one-piece design makes the product easy to install and maintain.
There are no parts to lose or replace.
FEATURES
• Supports one MuxLab square balun
• Snap-off mounting tabs for mounting versatility
• Attaches to standard gang boxes and mud rings
Anixter No. Vendor No.
Description
368149
500910
Wall Mount Balun Fixture
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
Accessories
Plates;Surface-mount Balun/15060
Chassis;Rack-mount/17210
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Surface Mount Balun Plate
MUXLAB INC
Rackmount Balun Chassis 6
PR21540V2-122464.tif
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
PR28493V2-208793.tif
The Rackmount Balun Chassis 6 is designed as a headend cable management
solution to allow any combination of MuxLab square baluns to be installed in a 19 in.
relay rack. Headend A/V equipment such as DVD players, video servers and satellite
boxes may be installed in a local wiring closet and connected to the Cat 5 structured
cabling system via a wide array of MuxLab balun solutions. The panel is
custom-tailored to allow any combination of up to six MuxLab baluns to be installed.
The baluns may be installed with the RJ45 either front- or rear-facing depending on
where the Cat 5 cabling will enter or exit the system. At the display end, the
appropriate MuxLab baluns are installed at the display to support a fully
Cat 5 cabling solution. Each balun snaps into place and is held firmly by a spring
latching mechanism. The one-piece design makes the product easy to install and
maintain. There are no parts to lose or replace. Blank Filler Modules (500901) may be
ordered separately to fill in unused slot positions.
FEATURES
• Space-efficient - 1U height
• Supports up to six baluns
• Includes four rack-mount screws and washers
• Slot number silkscreen on front and rear
Anixter No. Vendor No.
Description
420919
500902
Rackmount Balun Chassis 6
8.49
Video Transmission, Media Conversion and Wireless
The Surface Mount Balun Plate (500915) allows any MuxLab square balun to be
installed on a wall or furniture surface for a more permanent and secure installation.
Headend A/V equipment such as DVD players, video servers and satellite boxes may
be installed in a local wiring closet and connected to the Cat 5 structured cabling
system via a wide array of MuxLab balun solutions. The 500915 fully covers the balun
and allows the pin configuration to be displayed for ease of reference. Mounting ears
are positioned to allow multiple fixtures to be installed next to each other. The
500915 comes with two mounting screws and plastic anchors for drywall
(Gyproc) installation.
FEATURES
• One-piece design
• May be mounted close to each other
• Includes two mounting screws and anchors
• Balun sold separately
Anixter No. Vendor No.
Description
368152
500915
Surface Mount Balun Plate
MUXLAB INC
Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders
Ethernet over Coax - 10/100BASE-T
./Power Supplies;Ethernet/17945
Transceivers;IP/17960
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
Power and Ethernet over Coaxial Cable
Video Transmission, Media Conversion and Wireless
COMNET
NV-EC1701 Ethernet/PoE over Coax EoC Transceiver
PR34802V2-262082.tif
The ComNet CWFE1POCOAX Series transports Ethernet and camera/device operating
power between the remote device and headend location using existing 75 ohm
coaxial cable. It eliminates the need to have a separate power source at the remote
location and provides operating power for the remote ComNet modem and PoE device.
Based on the IEEE 802.3af standard for Power over Ethernet (PoE), the
CWFE1POCOAXA provides up to 15.4 watts of operating power to the remote PSE
device. The CWFE1POCOAXA transports Ethernet data at rates of up to 100 Mbps over
a distance of 230 meters (750 feet) over standard 75 ohm coaxial cable. The
CWFE1POCOAXA or CWFE2POCOAXA is used at the headend and the CWFE1POCOAXBM
is used at the remote location. ComNet products are made in the USA, and are
available to purchase under GSA contract.
FEATURES
• Ethernet data rates of 100 Mbps
• BNC connectorD for coaxial cable
• IEEE 802.3 compliant
• Power supply included
• Five-year warranty
Anixter No. Vendor No.
Description
448470
CWFE1P0C0AXA
Power over Coax; Power over
Ethernet (PoE)
448471
CWFE2POCOAXA
Dual Power over Coax; Power over
Ethernet (PoE)
448472
CWFE1POCOAXBM
Power over Coax; Power over Ethernet
(PoE) Remote
NVT
PR34829V2-263129.tif
The NVT Model NV-EC1701 Ethernet/PoE over Coax EoC Transceiver is a compact
media converter that allows 10/100BASE-T Ethernet and PoE power to be transmitted
using coax cable. These EoC devices are typically used in legacy installations where
existing coax is redeployed as part of an upgrade to IP cameras. The 48 V DC
Class 2 power is delivered to one transceiver, which distributes it to up to four remote
transceivers and their PoE cameras. These transceivers are extremely simple to use,
with no IP or MAC address configuration required. Status LEDs indicate power and
link connectivity/activity for RJ45 and BNC ports. The NV-EC1701 is backed by NVT's
award-winning customer support and limited lifetime warranty.
FEATURES
• Transmit 10/100BASE-T full duplex Ethernet up to 2,500 ft. (750 m) over
RG-59 (or similar)
• Supports up to 60 Mbs of continuous effective bandwidth
• Powers PoE cameras (or other PoE devices), up to 45 watts
• One EoC transceiver at the network end can support up to four remote
transceivers/IP cameras using BNC "T" adapters
• Up to four EoC transceivers may be rack mounted on a NV-RM8/10
• 48 V DC from one power supply is distributed over the coax to all
connected equipment
• Transparent network plug-and-play connectivity; no configuration or
setup required
• Supports all networking protocols (UDP, TCP/IP, HTTP, etc.)
• Advanced transmission and power technology with built-in transient protection
• Limited lifetime warranty
Anixter No. Vendor No.
Description
442049
NV-EC1701
Ethernet/PoE over Coax EoC Transceiver
KITS
Anixter No.
442054
442055
442056
442057
8.50
Vendor No.
NV-EC1701-KIT1
NV-EC1701-KIT2
NV-EC1701-KIT3
NV-EC1701-KIT4
Description
1-camera kit
2-camera kit
3-camera kit
4-camera kit
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
HOTPOINT 5000 SERIES - INDOOR
./Access Points;Wireless/15162
Index1.Networking Systems//Video Products//Video Security Systems
HotClient 2100 Customer Premises Equipment (CPE)
HOTCLIENT 2100 - INDOOR
Anixter No. Vendor No.
424473
5100
PR21639V2-124465.tif
489199
AOI-245-MIMO-25
HOTPOINT 5200 - OUTDOOR
Anixter No. Vendor No.
362296
2100
Description
HotClient 2100 customer premises
equipment, indoor, includes Firetide
CPE (802.11 b/g, 400 mW), AC/DC
power supply adapter, kit of
international plugs - USA, EU, UK, AUS,
two 2.4 GHz 5 dBi antennas,
management software
Access Points;Wireless/17468
Index1.Networking Systems//Video Products//Video Security Systems
HotPoint 5000 Series MIMO Access Points
FIRETIDE
Firetide HotPoint 5000 series MIMO wireless access points deliver a modular access
solution for large-scale, indoor and outdoor wireless networks. Their modular design
enables full network and software integration of the access points with a Firetide
wireless mesh network while at the same time permitting independent physical
placement directly connected to a wired network to provide optimal accessibility for
Wi-Fi clients.
FEATURES
• Single-point network management for mesh and access points with HotView
Pro software
• Create logical networks with varying levels of security, access and performance
• Designed for Hot Spots - supports virtual APs and virtual AP groups
• Advanced security and performance features (WPA and WEP encryption)
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
Anixter No. Vendor No.
424475
5200
Description
HotPoint 5100 - Includes Firetide MIMO
access point, dual radio 802.11
a/b/g/n, 100 mW, AC to DC power
adapter with region-specific power
cable, six dual-band 2.4 GHz and
5 GHz 3 dBi antennas for staging,
one RJ45 Ethernet cable
Six-port 2.4 GHz, 5 GHz dual-band
ceiling antenna with three 2.4 GHz
connectors and three 5 GHz connectors
PR29022V2-215017.tif
Description
Includes Firetide MIMO access point,
dual radio 802.11 a/b/g/n, 100 mW,
pole-mounting bracket, PoE injector,
one RJ45 Ethernet cable for staging,
one weatherized Ethernet kit, six
dual-band 2.4 GHz and 5 GHz 3 dBi
antennas for staging
8.51
Video Transmission, Media Conversion and Wireless
FIRETIDE
Firetide HotClient 2100 customer premises equipment (CPE) provides a secure and
reliable solution for extending the reach of outdoor wireless mesh networks indoors.
HotClient CPE enables network operators deploying municipal and enterprise wireless
networks the ability to maintain optimal user experience and connectivity anywhere.
FEATURES
• Centralized management via HotView Pro Network Management Software
• Ability to configure and enforce service level agreements (SLA)
• RADIUS server management
• Built-in standards-based security features including: WEP2, AES 128/256,
RADIUS, SSID, MAC access control, NAT, VLAN and digital certificates
PR29021V2-215016.tif
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
HOTPORT 7010 - INDOOR
Mesh Access Points;Wireless/14239
Index1.Networking Systems//Video Products//Video Security Systems
Video Transmission, Media Conversion and Wireless
HotPoint 4100 Access Points
FIRETIDE
Firetide HotPoint 4100 wireless access points deliver a modular access solution for
large-scale, indoor and outdoor wireless networks. Their modular design enables full
network and software integration of the access points with a Firetide wireless mesh
network while at the same time permitting independent physical placement directly
connected to a wired network to provide optimal accessibility for Wi-Fi clients.
FEATURES
• Single-point network management for mesh and access points with HotView
Pro software
• Create logical networks with varying levels of security, access and performance
• Designed for Hot Spots - supports up to four virtual APs and virtual AP groups
• Advanced security and performance features (WPA and WEP encryption)
• High-power radios with up to 400 mW provide extended reach and penetration
HOTPOINT 4100 - INDOOR
PR21639V2-124465.tif
With indoor MIMO-802.11n capabilities, dual radio, tri-band spectrum 2.4 GHz/
4.9 GHz/5 GHz, 400 mW, wireless mesh node, includes power supply desktop brick
12 V DC, two-meter North America AC power cable, documentation CD and hardware
installation guide. The 11n MIMO functionality requires purchase of
SW-7000-MIMO license.
Anixter No. Vendor No.
424454
7010
434819
7010-FIPS
448363
7010-900
D
Anixter No. Vendor No.
384861
4100
Description
Includes Firetide access point
(802.11 b/g, up to 400 mW), AC/DC
power-supply adapter, kit of
international plugs - USA, EU, UK, AUS,
two 2.4 GHz 5 dBi antennas,
management software
PR28565V2-209175.tif
Description
Six dual-band 2.4 GHz and 5 GHz 3 dBi
antennas, only single radio enabled,
second radio enabling requires
purchase of SW-7000-RADIO-1
FIPS 140-2 NIST-compliant, six
dual-band 2.4 GHz and 5 GHz 3 dBi
antennas, only single radio enabled,
second radio enabling requires
purchase of SW-7000-RADIO-1
Indoor 900 MHz capable, three
dual-band 2.4 GHz and 5 GHz 3 dBi
antennas, one 900 MHz
staging antenna
HOTPORT 7020 - OUTDOOR
PR28564V2-209174.tif
Mesh Nodes;Wireless/16187
Index1.Networking Systems//Video Products//Video Security Systems
HotPort 7000 Series MIMO-802.11n Wireless Nodes
FIRETIDE
Firetide HotPort 7000 mesh nodes provide fiber-equivalent throughput and reliability
over wireless Ethernet, delivering true wireless infrastructure capabilities for
large-scale municipal, public safety, industrial and transportation deployments.
FEATURES
• Fiber-like speed with up to 400 Mbps throughput, exceeding that of current
wired solutions such as T1, Fast Ethernet or OC-3 fiber
• Ease of deployment with the self-forming nature of Firetide infrastructure mesh
• Ease of network management and planning with advanced utilities: antenna
alignment and integrated spectrum analysis
• Reliable multicast capabilities for real-time evidence-grade video streaming to
multiple destinations
• Flexible configuration with operation in 2.4 GHz, 4.9 GHz (U.S. public safety) or
5 GHz frequency bands
8.52
With outdoor MIMO-802.11n capabilities, dual radio, tri-band spectrum 2.4 GHz/
4.9 GHz/5 GHz, 400 mW, wireless mesh node, five-meter North America AC power
cable, three RJ45 weatherized Ethernet connectors, documentation CD and
hardware installation guide. The 11n MIMO functionality requires purchase of
SW-7000-MIMO license.
Anixter No. Vendor No.
424457
7020
Description
Six dual-band 2.4 GHz and 5 GHz 3 dBi
antennas, only single radio enabled,
second radio enabling requires
purchase of SW-7000-RADIO-1
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
Anixter No. Vendor No.
434818
7020-FIPS
448362
Description
FIPS 140-2 NIST-compliant, six
dual-band 2.4 GHz and 5 GHz 3 dBi
antennas, only single radio enabled,
second radio enabling requires
purchase of SW-7000-RADIO-1
Outdoor 900 MHz capable, three
dual-band 2.4 GHz and 5 GHz 3 dBi
antennas, one 900 MHz
staging antenna
7020-900
HOTPORT 7000 SERIES SOFTWARE
For a single node.
424462
SW-7000-MIMO-1
Description
Radio license; electronic license allows
user to enable and use the second
radio in the Firetide
7000 series product
MIMO license; allows user to enable
and use the MIMO functionality (11n)
on the Firetide 7000 series product
Nodes;Wireless/18697
Index1.Networking Systems//Video Products//Video Security Systems
FM1200 VOLO
FLUIDMESH NETWORKS INC
PR85484V2-675783.tif
The Fluidmesh FM1200 VOLO is the latest generation of Fluidmesh wireless products.
It includes a MIMO based radio, a 30 degree high-gain integrated patch antennas
and the new Prodigy 2.0 transmission protocol for maximum performance and
reliability. The FM1200 VOLO is designed and manufactured for backhauling of
mission critical applications including video, voice and data. A lot of research was
done in making the product more intuitive and faster to deploy. It comes with a
two-cord watertight cable gland as well as a NPT-1 threaded bottom that allows to
run conduit directly to it.
FEATURES
• 4.9 and 5.1-5.8 GHz transmission
• 300 Mbps modulation speed
• Up to 20 miles of LOS range
• Small form-factor for embedded applications (156.6 mm x 330.5 mm x
79.9 mm, 18.34 oz.)
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
ENABLE ETHERNET THROUGHPUT
Anixter No. Vendor No.
517438
FM1200V-02
517439
FM1200V-05
517440
FM1200V-10
517441
FM1200V-30
517442
FM1200V-60
517443
FM1200V-UN
UPGRADE ETHERNET THROUGHPUT
Anixter No. Vendor No.
517445
FM1200V-UPG-0205
517446
FM1200V-UPG-0210
517448
FM1200V-UPG-0230
517449
FM1200V-UPG-0260
517450
FM1200V-UPG-02UN
517452
517453
517454
517455
517456
517457
517459
517460
517461
517462
FM1200V-UPG-0510
FM1200V-UPG-0530
FM1200V-UPG-0560
FM1200V-UPG-05UN
FM1200V-UPG-1030
FM1200V-UPG-1060
FM1200V-UPG-10UN
FM1200V-UPG-3060
FM1200V-UPG-30UN
FM1200V-UPG-60UN
Description
2.5 Mbps
5 Mbps
10 Mbps
30 Mbps
60 Mbps
Unlimited (100 Mbps)
Description
From 2.5-5 Mbps
From 2.5-10 Mbps
From 2.5-30 Mbps
From 2.5-60 Mbps
From 2.5 Mbps to unlimited
(100 Mbps)
From 5-10 Mbps
From 5-30 Mbps
From 5-60 Mbps
From 5 Mbps to unlimited (100 Mbps)
From 10-30 Mbps
From 10-60 Mbps
From 10 Mbps to unlimited (100 Mbps)
From 30-60 Mbps
From 30 Mbps to unlimited (100 Mbps)
From 60 Mbps to unlimited (100 Mbps)
8.53
Video Transmission, Media Conversion and Wireless
Anixter No. Vendor No.
394208
SW-7000-RADIO-1
• AES 128-bit encryption available
• High reliability and low latency — prodigy intelligent transmission protocol
• Cost-effective — pay-as-you-grow bandwidth model
• Includes enterprise network management software
• Small form-factor
• Solar power-friendly due to low consumption (max. 8 W)
Anixter No. Vendor No.
Description
517437
FM1200V-HW
FM1200 VOLO, single MIMO radio
device, 1 Mbps Ethernet throughput,
4.9-5.8 GHz with integrated panel
antennas; two Ethernet ports; includes
passive PoE injector and 90-240 V AC
power supply
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
Nodes;Wireless/18698
Nodes;Wireless/18699
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Video Products//Video Security Systems
FM3100M ENDO
FM3100 MITO
Video Transmission, Media Conversion and Wireless
FLUIDMESH NETWORKS INC
PR85485V2-675788.tif
The FM3100M ENDO is a MIMO-based wireless product designed and manufactured
for back-hauling mission-critical applications for video, voice and data. This product
is designed for all those applications where an integrated antenna design won't work
such as on-board vehicles, ferries and mining trucks.
FEATURES
• Available with single- or dual-radio configuration
• 3.5, 4.9 and 5.1-5.8 GHz transmission
• 300 Mbps modulation speed
• Up to 20 miles of LOS range
• Small form-factor for embedded applications
• AES 128-bit encryption available
• High reliability and low latency — prodigy intelligent transmission protocol
• Cost-effective — pay-as-you-grow bandwidth model
D
• Includes enterprise
network management software
• Small form-factor (80 mm x 90 mm x 36 mm; 7.0 oz.)
• Solar power-friendly due to low consumption (max. 8 W)
Anixter No. Vendor No.
Description
517463
FM3100M-ENDO-HW
FM3100 ENDO, single-radio
wireless mesh router operating at
3.5 GHz and 4.9-5.8 GHz, 10 Mbps
Ethernet throughput, one Ethernet
port; for indoor use with external
power supply operating at 12 V DC
or 110-240 V AC
ENABLE ETHERNET THROUGHPUT
Anixter No. Vendor No.
517466
FM3100M-ENDO-15
517469
FM3100M-ENDO-UN
Description
15 Mbps
Unlimited
UPGRADE ETHERNET THROUGHPUT
Anixter No. Vendor No.
Description
517471
FM3100M-ENDO-UPG-15UN From 15 Mbps to unlimited
8.54
FLUIDMESH NETWORKS INC
PR85486V2-675793.tif
The FM3100 MITO is a MIMO-based wireless product designed and manufactured for
back-hauling mission-critical applications for video, voice and data. Thanks to a 90
sector antenna, the FM3100 can be used to create point-to-multipoint networks with
up to 30 clients offering an aggregate throughput of up to 100 Mbps.
FEATURES
• 90 integrated sector antenna
• 4.9 and 5.1-5.8 GHz transmission
• 300 Mbps modulation speed
• Up to 20 miles of LOS range
• Includes PoE injector
• AES 128-bit encryption available
• High reliability and low latency — prodigy intelligent transmission protocol
• Cost-effective — pay-as-you-grow bandwidth model
• Includes enterprise network management software
• Small form-factor (370 mm x 80 mm x 85 mm; 3.52 lb.)
• Solar power-friendly due to low consumption (max. 8 W)
Anixter No. Vendor No.
Description
494925
FM3100M-HW
FM3100 MITO, single MIMO radio
device, 10 Mbps Ethernet throughput,
4.9-5.8 GHz with integrated 90º sector
antennas; one Ethernet port; includes
passive PoE injector and 90-240 V AC
power supply
494926
FM3100M-30
Enable 30 Mbps Ethernet throughput in
FM3100 Devices
494927
FM3100M-60
Enable 60 Mbps Ethernet throughput in
FM3100 Devices
494928
FM3100M-UN
Enable Unlimited Ethernet throughput
(100 Mbps) in FM3100 Devices
494929
FM3100M-UPG-3060 Upgrade Ethernet throughput from
30 Mbps to 60 Mbps for FM3100
494930
FM3100M-UPG-30UN Upgrade Ethernet throughput from
30 Mbps to Unlimited (100 Mbps)
for FM3100
494931
FM3100M-UPG-60UN Upgrade Ethernet throughput from
60 Mbps to Unlimited (100 Mbps)
for FM3100
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
EXTENDED WARRANTY PLANS
Anixter No. Vendor No.
494942
FM-EEW-3Y
FM-EEW-5Y
494944
FM-EW-2Y
OPTIONAL SOFTWARE PLUG-INS
Anixter No. Vendor No.
494940
FM-AES
494941
509979
FM-VLAN
FM-MOB
ON-SITE SUPPORT
Anixter No. Vendor No.
494945
FM-FIELD-1D
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
Description
Limited warranty extension to three
years and enhanced warranty including
advanced replacement; plan is valid for
one product and must be associated
with the product serial number prior to
physical installation on-site
Limited warranty extension to five years
and enhanced warranty including
advanced replacement; plan is valid for
one product and must be associated
with the product serial number prior to
physical installation on-site
Limited warranty extension for
additional two years after the standard
two-year warranty expiration; plan is
valid for one product and must be
associated with the product serial
number before the standard
warranty expires
Description
AES Plug-In — enables AES 128-bit
hardware-based encryption on one
Fluidmesh product; one plug-in is
required for each hardware device in
which encryption is desired
VLAN Plug-In — enables port-based
and MAC address-based VLANs on one
Fluidmesh product; all Fluidmesh
hardware devices in a network must
have a plug-in for VLAN to operate
Fluidity Software Plug-Ins for mobility
applications that require fast roaming;
nnly available for MITO, ENDO, and
VOLO Series; previous approval by
Fluidmesh is required before ordering
Description
Fluidmesh engineer field support/
system commissioning fee for one day
(eight hours) — field assistance by a
Fluidmesh engineer; traveling expenses
are included but additional traveling
fees may apply depending on location
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
Indoor Unit-C
RADWIN INC
PR84936V2-671527.tif
The RADWIN Indoor Unit-C (IDU-C) product line comprises of carrier grade 19 in.
indoor devices providing up to 16 E1/T1 interfaces (configurable), two Ethernet ports
and one SFP port. Supporting independent clock per each TDM port and dual
wide-range DC feed, IDU-C is a scalable, easy-to-use solution that is compatible with
the RADWIN 2000 porfolio.
FEATURES
• Supporting independent clock per each TDM port
• Scalable, easy-to-use solution
• Compatible with RADWIN 2000 portfolio
Anixter No. Vendor No.
Description
510351
RW-7200-2000
IDU-C with two Ethernet interfaces with
10/100/1000BASE-T interfaces and
SFP port
510352
RW-7204-2000
IDU-C with four TDM ports, two Ethernet
interfaces and SFP port
510353
RW-7208-2000
IDU-C with eight TDM ports, two
Ethernet interfaces and SFP port
510354
RW-7216-2000
IDU-C with 16 TDM ports, two Ethernet
interfaces and SFP port
Switches;Wireless Support/18702
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
Indoor Unit-E
RADWIN INC
PR84932V2-671503.tif
The Radwin IDU-E series consists of two units that are half-width, 19 in. rack
mountable and support two Ethernet ports and up to two T1/E1 ports. IDU-E products
support wide-range DC power feed (-20 V DC to -60 V DC).
FEATURES
• Can be utilized with all RW2000 Radios
• High-impact plastic cases
Anixter No. Vendor No.
Description
510355
RW-7100-2000
IDU-E with two Ethernet interfaces
510356
RW-7102-2000
IDU-E with two TDM ports, two Ethernet
interfaces and external
alarm interfaces
8.55
Video Transmission, Media Conversion and Wireless
494943
Switches;Wireless Support/18701
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
Anixter No. Vendor No.
513731
RW-2030-0100
Switches;Wireless Support/18703
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
RADWIN Indoor Unit-H
Video Transmission, Media Conversion and Wireless
RADWIN INC
PR84940V2-671545.tif
The RADWIN Indoor Unit-H (IDU-H) product line comprises of carrier grade, half-width
19 in. rack-mounted indoor devices aggregating Ethernet traffic for up to six ODUs. It
delivers their traffic to two high-speed uplink Ethernet ports and two SFP ports.
FEATURES
• Supports Legacy PoE ports (10/100/1000 Mbps)
• Two uplink Ethernet ports (10/100/1000BASE-T Ethernet)
• Two uplink 1000 Mbps SFP ports
Anixter No. Vendor No.
Description
510357
RW-7300-2006
IDU-H with two Ethernet 10/100/
1000BASE-T interfaces and two
SFP ports
513732
RW-2030-0200
513733
RW-2049-0100
513734
RW-2049-0200
513735
RW-2050-0100
513736
RW-2050-0200
513737
RW-2050-H200
513738
RW-2050-H100
513739
RW-2825-0100
513740
RW-2825-0200
Links;Point-to-point/18704
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
2000 C-Series Point-to-point Link
RADWIN INC
PR84912V2-671419.tif
D
The RADWIN 2000 C-Series point-to-point radios deliver throughput of up to
200 Mbps and up to 16 xE1s/T1s and incorporate state-of-the-art technologies
including MIMO and OFDM. Unique air interface capabilities secure performance
optimization, enabling high spectral efficiency and robust performance in dense
radio environments.
FEATURES
• Asymmetric capacity, fixed or dynamic channel allocation
• Ethernet service protection through 1+1 and ring topology
• Long range up to 120 km/75 miles
Anixter No. Vendor No.
Description
510358
RW-2024-0100
2000 C-Series Point-to-Point Link
200 Mbps net throughput with
integrated antenna supporting 2.4 GHz
513730
RW-2024-0200
2000 C-Series Point-to-Point Link
200 Mbps net throughput
connectorized for external antenna
supporting 2.4 GHz
8.56
Description
2000 C-Series Point-to-Point Link
100 Mbps net throughput with
integrated antenna factory default
3.65 GHz
2000 C-Series Point-to-Point Link
100 Mbps net throughput
connectorized for external antenna
factory default 3.65 GHz
2000 C-Series Point-to-Point Link
200 Mbps net throughput with
integrated antenna factory default
4.9 GHz
2000 C-Series Point-to-Point Link
200 Mbps net throughput
connectorized for external antenna
factory default 4.9 GHz FCC
2000 C-Series Point-to-Point Link
200 Mbps net throughput with
integrated antenna 5.8 GHz
2000 C-Series Point-to-Point Link
200 Mbps net throughput
connectorized for external antenna
factory default 5.8 GHz
2000 C-Series Point-to-Point Link
200 Mbps net throughput
connectorized for external antenna
supporting 5.8 GHz. Approved
for HAZLOC
2000 C-Series Point-to-Point Link
200 Mbps net throughput with
integrated antenna supporting 5.8 GHz.
Approved for HAZLOC
2000 C-Series Point-to-Point Link
100 Mbps net throughput with
integrated antenna supporting 2.5 GHz
2000 C-Series Point-to-Point Link
100 Mbps net throughput
connectorized for external antenna
supporting 2.5 GHz
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
Links;Point-to-point/18705
Links;Point-to-point/18706
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
2000 B-Series Point-to-Point Link
RADWIN INC
2000 A-Series Point-to-Point Link - Radio
PR84912V2-671419.tif
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
PR84963V2-671677.tif
RADWIN 2000 A-Series radios offer highly affordable prices for a 10 Mbps model and
25 Mbps net aggregate throughput + four E1s/T1s model in the 4.9, 5.x and 2.4 GHz
bands, together with software capacity upgrade capabilities from 10 Mbps to
25 Mbps.
FEATURES
• MIMO and OFDM technologies
• Extremely small form factor
• Long range up to 120 km/75 miles
Anixter No. Vendor No.
Description
513747
RW-2024-A125
2000 A-Series Point-to-Point Link - radio
25 Mbps net aggregate throughput with
integrated antenna supporting 2.4 GHz
513748
RW-2024-A225
2000 A-Series Point-to-Point Link - radio
25 Mbps net aggregate throughput with
connectorized antenna supporting 2.4 GHz
513749
RW-2050-A125
2000 A-Series Point-to-Point Link - radio
25 Mbps net aggregate throughput with
integrated antenna supporting 5.8 GHz
513750
RW-2050-A225
2000 A-Series Point-to-Point Link - radio
25 Mbps net aggregate throughput with
connectorized antenna supporting 5.8 GHz
513751
RW-2024-A110
2000 A-Series Point-to-Point Link - radio
10 Mbps net aggregate throughput with
integrated antenna supporting 2.4 GHz
513752
RW-2024-A210
2000 A-Series Point-to-Point Link - radio
10 Mbps net aggregate throughput with
connectorized antenna supporting 2.4 GHz
513753
RW-2050-A110
2000 A-Series Point-to-Point Link - radio
10 Mbps net aggregate throughput with
integrated antenna supporting 5.8 GHz
513754
RW-2050-A210
2000 A-Series Point-to-Point Link - radio
10 Mbps net aggregate throughput with
connectorized antenna supporting 5.8 GHz
8.57
Video Transmission, Media Conversion and Wireless
RADWIN 2000 B-Series radios deliver up to 50 Mbps net aggregate throughput and up
to eight E1s/T1s and incorporate state-of-the-art technologies including MIMO and
OFDM. Unique air interface capabilities secure performance optimization, enabling
high spectral efficiency and robust performance in dense radio environments. The
radios come with an extremely small form factor antenna and include built-in
connectors for optional external antenna
FEATURES
• Asymmetric capacity, fixed or dynamic channel allocation
• Ethernet service protection through 1+1 and ring topology
• Long range up to 120 km/75 miles
Anixter No. Vendor No.
Description
513741
RW-2024-B150
2000 B-Series Point-to-Point Link 50 Mbps
net throughput with connectorized
antenna, supporting 2.4 GHz FCC/IC band
513742
RW-2024-B250
2000 B-Series Point-to-Point Link 50 Mbps
net throughput with integrated antenna,
supporting 2.4 GHz FCC/IC band
513743
RW-2049-B350
2000 B-Series Point-to-Point Link 50 Mbps
net throughput with integrated antenna
and connectorized supporting 4.9 GHz
513744
RW-2050-B350
2000 B-Series Point-to-Point Link 50 Mbps
net throughput with integrated antenna
and connectorized supporting 5.8 GHz
513745
RW-2825-B250
2000 B-Series Point-to-Point Link 50 Mbps
net throughput with connectorized antenna
supporting 2.5 GHz
513746
RW-2825-B150
2000 B-Series Point-to-Point Link 50 Mbps
net throughput with integrated antenna
supporting 2.5 GHz
RADWIN INC
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Access Points/Nodes/Radios/Bridges
Nodes;Multiband/18707
Subscriber Units;Multiband/18708
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
5000 Multiband Base Station
Video Transmission, Media Conversion and Wireless
RADWIN INC
5000 Multiband Subscriber Units
PR84915V2-671425.tif
The RADWIN 5000 high-capacity base station is an OFDM/MIMO 2x2 outdoor base
station radio unit that covers a single sector in MIMO mode or dual sectors in
diversity mode. The unit is light and compact and includes connectors for an external
antenna. Supports up to 250 Mbps per sector, delivering high capacity over a single
radio unit.
FEATURES
• Multiband supporting 2.3-2.7, 3.3-3.8, 4.8-6.0 GHz
• OFDM, MIMO 2x2/Diversity enables nLOS deployment
• High- and fixed-capacity HSUs (up to 32 per sector/64 timeslots)
Anixter No. Vendor No.
Description
513755
RW-5025-0B50
5000 Multiband Base Station 25 Mbps net
throughput with integrated external
antenna factory default 5.8 GHz
D
513756
RW-5025-0C50
5000 Multiband Base Station 25 Mbps net
throughput connectorized for external
antenna factory default 5.8 GHz
513757
RW-5050-0150
5000 Multiband Base Station 25 Mbps net
throughput connectorized for external
antenna factory default 5.8 GHz
513758
RW-5050-0250
5000 Multiband Base Station 50 Mbps net
throughput connectorized for external
antenna factory default 5.8 GHz
513759
RW-5100-0230
5000 Multiband Base Station 100 Mbps net
throughput connectorized for external
antenna factory default 3.65 GHz
513760
RW-5100-8225
5000 Multiband Base Station 100 Mbps net
throughput connectorized for external
antenna supporting 2.5 GHz
513761
RW-5200-0250
5000 Multiband Base Station 250 Mbps net
throughput connectorized for external
antenna factory default 5.8 GHz
8.58
RADWIN INC
The RADWIN 5000 multiband radio provides a variety of high-capacity subscriber
units (HSUs) that deliver 5, 10, 25 and 50 Mbps for fixed and nomadic applications.
FEATURES
• Multiband supporting 2.3-2.7, 3.3-3.8, 4.8-6.0 GHz
• OFDM, MIMO 2x2/Diversity enables nLOS deployment
• High- and fixed-capacity HSUs (up to 32 per sector/64 timeslots)
Anixter No. Vendor No.
Description
513762
RW-5505-0A50
5000 Multiband Subscriber Units 5 Mbps
net throughput with high-gain integrated
antenna factory default 3.65 GHz
513763
RW-5505-0C50
5000 Multiband Subscriber Units 5 Mbps
net throughput connectorized for external
antenna supporting 5.8 GHz
513764
RW-5510-0130
5000 Multiband Subscriber Units 10 Mbps
net throughput with high-gain integrated
antenna factory default 3.65 GHz
513765
RW-5510-0230
5000 Multiband Subscriber Units 10 Mbps
net throughput connectorized for external
antenna factory default 3.65 GHz
513766
RW-5510-0350
5000 Multiband Subscriber Units 10 Mbps
net throughput integrated antenna and
connectorized factory default 5.8 GHz
513767
RW-5510-0A50
5000 Multiband Subscriber Units 10 Mbps
net throughput with high-gain integrated
antenna factory default 3.65 GHz
513768
RW-5510-0C50
5000 Multiband Subscriber Units 10 Mbps
net throughput connectorized for external
antenna supporting 5.8 GHz
513769
RW-5525-0A50
5000 Multiband Subscriber Units 25 Mbps
net throughput with high-gain integrated
antenna supporting factory default 5.8 GHz
513770
RW-5525-0C50
5000 Multiband Subscriber Units 25 Mbps
net throughput connectorized for external
antenna factory default 5.8 GHz
513771
RW-5550-0130
5000 Multiband Subscriber Units 50 Mbps
net throughput with high-gain integrated
antenna factory default 3.65 GHz
513772
RW-5550-0150
5000 Multiband Subscriber Units 50 Mbps
net throughput with high-gain integrated
antenna factory default 5.8 GHz
513773
RW-5550-0250
5000 Multiband Subscriber Units 50 Mbps
net throughput connectorized for external
antenna factory default 5.8 GHz
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Antennas
./Antennas;Wireless/14240
Index1.Networking Systems//Video Products//Video Security Systems
Antenna Assemblies
FIRETIDE
PR13649V2-31811.tif
OMNIDIRECTIONAL ANTENNAS
Anixter No. Vendor No.
344681
AO-050-N
403369
AO-900-8
333063
4000-1111
PANEL ANTENNAS
Anixter No. Vendor No.
344687
AP-050-N
403370
AP40-900-12
Description
4.9 to 5.8 GHz omnidirectional antenna
with 10 dBi gain, 1.5 meter
LMR400 cable, lightning suppressor
with N-type connector and
pole-mount bracket
900 MHz omnidirectional antenna,
8 dBi gain
2.4 GHz omnidirectional antenna with
7.5 dBi gain, N-type connector, (for
HotPoint APs only)
Description
4.9 to 5.8 GHz subscriber panel
antenna with 23 dBi gain (21 dB gain
for 4.9 - 5.1), 1.5 meter LMR400 cable,
lightning suppressor with N-type
connector and Az/E1 adjustable mount
900 MHz 12 dBi panel antenna (43 x
42 degree beamwidth)
Includes 1.5 meter LMR400 cable and lightning suppressor with N-type connector.
344733
AS-050-N
CB-C-050-N
CB-C-015-N-MIMO
489203
CB-C-025-N-MIMO
448476
CB-025-N-MIMO
Antennas;Wireless/16194
Index1.Networking Systems//Video Products//Video Security Systems
Antenna Assemblies for HotPort 7000 Mesh Nodes
FIRETIDE
Customized antennas designed to work with Firetide 7000 mesh nodes are suited for
both outdoor and indoor installations. Customers choose the specific antenna based
on the installation requirements, directional or omnidirectional, and frequencies
ranging from 4.9 to 6.1 GHz or 2.3 to 2.7 GHz.
FEATURES
• Each antenna contains three active antenna elements capable of transmitting
and receiving data
• Antennas are MIMO-aware; the elements are polarized to maximize the
MIMO effectiveness
• Antennas are easy to install and replace; wall- or pole-mountable
90º SECTOR ANTENNAS
Includes BSA MIMO 3x3.
Anixter No. Vendor No.
397481
AS90-024-MIMO-13
424476
SECTOR ANTENNAS
Anixter No. Vendor No.
344730
AS-024-N
489204
489202
Description
2.4 to 2.7 GHz 90º sector antenna with
15.5 dBi gain and tilt mount
4.9 to 5.8 GHz 90º sector antenna with
16 dBi gain and
elevation-adjustable mount
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
Description
RF lightning arrestor
Antenna cable assembly,
1.5 m LMR-400
Antenna cable assembly, 5 m LMR-400
MIMO antenna cable assembly for
5200 and 7020. 3-in-1 bundled 1.5 m
LMR-400 cables
MIMO antenna cable assembly for
5200 and 7020. 3-in-1 bundled 2.5 m
LMR-400 cables
MIMO antenna cable assembly for
5200 and 7020. 3-in-1 bundled 2.5 m
LMR-400 cables with integrated
lightning suppressor N-type connector
Description
90º sector antenna, 2.3-2.7 GHz,
3x13 dBi gain
AS90-050-MIMO-16-T Triple-polarized, 4.9-6.1 GHz,
3x16 dBi gain
120º SECTOR ANTENNAS
Includes BSA MIMO 3x3.
Anixter No. Vendor No.
Description
397486
AS120-024-MIMO-11 2.3-2.7 GHz, 3x11.5 dBi gain
397487
AS120-050-MIMO-15 4.9-6.1 GHz, 3x15 dBi gain
20º PATCH ANTENNA
Anixter No. Vendor No.
403367
AP20-050-MIMO-19
Description
20º patch antenna, BSA MIMO 3x3,
4.9-6.1 GHz
Continued on next page >>
8.59
Video Transmission, Media Conversion and Wireless
Firetide antenna assembly kits are available in 2.4 GHz, 5.1 to 5.8 GHz and 4.9 GHz
public safety versions, omnidirectional, panel/patch and 90º sector antenna
configurations, providing antenna solutions to meet the needs of your deployment.
FEATURES
• Firetide-certified antenna assembly
• Outdoor antennas are unobtrusive so they blend with any environment
• Sturdy attachment solutions with precise adjustments for optimal
antenna performance
• Includes 1.5 meter LMR-400 cable, lightning suppressor and mounting solution
• Indoor and outdoor configurations
ANTENNA CABLE ASSEMBLIES
Anixter No. Vendor No.
489205
CB-LT-01
489201
CB-C-015-N
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Antennas
(continued)
Antenna Assemblies for HotPort 7000 Mesh Nodes
Video Transmission, Media Conversion and Wireless
OMNIDIRECTIONAL ANTENNAS
Anixter No. Vendor No.
403365
AO-024-MIMO-8
414061
AO-050-MIMO-9
489200
AP5-050-MIMO-28
900 MHZ ANTENNAS
Anixter No. Vendor No.
403369
AO-900-8
403370
AP40-900-12
Description
Omnidirectional BSA, MIMO 3x3,
2.3-2.7 GHz
Omnidirectional BSA, MIMO 3X3,
4.9-6.1 GHz, 3x9 dBi gain
5º parabolic dish antenna 2x2 MIMO
4.9-6.1 capable
Description
900 MHz omnidirectional antenna,
8 dBi gain
900 MHz 12 dBi panel antenna (43 x
42 degree beamwidth)
Anixter No. Vendor No.
513782
RW-9061-5001
513783
RW-9061-6001
513784
RW-9061-5002
513785
RW-9061-5003
Description
Flat panel antenna, 1.2 ft., dual
polarization, gain 23 dBi,
4.90-6.06 GHz bands
Flat panel antenna, 2 ft., dual
polarization, gain 13 dBi,
5.70-6.40 GHz bands
Base station flat panel antenna, dual
polarization, gain 13 dBi,
4.90-6.060 GHz bands, 60º
Base station flat panel antenna, dual
polarization, gain 12 dBi,
5.15-5.875 GHz bands, 120º
Antennas;External/18709
Index1.Misc. & Credits//Miscellaneous//Unidentifable Nonstock
External Antennas for RADWIN 2000 and RADWIN 5000
RADWIN INC
EXTERNAL SUBSCRIBER UNIT ANTENNAS COMPATIBLE WITH RADWIN 2000 AND
RADWIN 5000 PORTFOLIO
Anixter No. Vendor No.
Description
513774
RW-9612-2427
Flat panel antenna, 1.2 ft., dual
polarization, gain 19 dBi,
D
2.30-2.70 GHz bands
513775
RW-9612-3338
Flat panel antenna, 1.2 ft., dual
polarization, gain 21 dBi,
3.30-3.80 GHz bands
513776
RW-9612-4001
Flat panel antenna, 1.2 ft., dual
polarization, gain 22 dBi,
4.40-5.10 GHz bands
513777
RW-9612-5001
Flat panel antenna, 1.2 ft., dual
polarization, gain 23 dBi,
4.90-6.06 GHz bands
513778
RW-9612-5764
Flat panel antenna, 1.2 ft., dual
polarization, gain 24 dBi,
5.70-6.425 GHz bands
513779
RW-9622-5001
Flat panel antenna, 2 ft., dual
polarization, gain 28 dBi,
4.90-6.425 GHz bands
EXTERNAL BASE STATION ANTENNAS FOR RADWIN 5000 PORTFOLIO
Anixter No. Vendor No.
Description
513780
RW-9061-2001
Base station flat panel antenna, dual
polarization, gain 14 dBi, 2.3-2.7 GHz
bands, 60º
513781
RW-9061-3001
Base station flat panel antenna, dual
polarization, gain 14 dBi, 3.3-3.8 GHz
bands, 90º
8.60
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Controllers
./Controllers;Wireless/18417
Index1.Networking Systems//Video Products//Video Security Systems
WLAN Controller
FWC 1000
Video Transmission, Media Conversion and Wireless
FIRETIDE
Focused on improving the reliability and availability of the WLAN system, Firetide
WLAN controllers bring in features like WLAN self-healing and intelligent data traffic
routing. With no licensing for AP scaling and features, the controller solution is
simple, flexible and ready to deploy. The controller features Firetide's wireless
platform software from their mesh product line that is highly optimized for
transporting high-performance applications such as video and voice over wireless.
FEATURES
• Seamless L3 mobility
• Auto AP discovery and offline configuration
• Automatic channel management and assignment
• WLAN self-healing
• External LDAP server*
• External authentication for captive portal users*
• Captive portal account management*
• External MAC-ACL list support with limit of 4,096 per VAP*
• Remote AP support*
• * Additional FWC 2000 feature not available in FWC 1000
PR71143V2-559770.tif
Includes four 10/100/1000 Mbps ports, one Ethernet RJ45 cable, power supply
desktop brick 12 V DC, one 2 meter North America AC power cable.
Anixter No. Vendor No.
448365
FWC 1000
FWC 2000
Description
WLAN controller - for 50 access points
PR71142V2-559764.tif
Provides supports scaling up to 150 with stacking of three controllers, includes four
10/100/1000 Mbps ports, one Ethernet RJ45 cable, power supply desktop brick
12 V DC, one two-meter North America AC power cable.
Anixter No. Vendor No.
448364
FWC 2000
Description
Rack-mountable WLAN controller - for
50 access points
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.61
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Accessories
./Mounting Solutions;Wireless/16198
Index1.Networking Systems//Video Products//Video Security Systems
Mounting Solutions
FIRETIDE
Anixter No. Vendor No.
448477
MT-7100
Description
HotPort 7100 family indoor mounting
kit for wall, upright, ceiling and office
panel installation, 10 machine screws
Power Sources;Wireless/16197
Index1.Networking Systems//Video Products//Video Security Systems
Video Transmission, Media Conversion and Wireless
Power Sources and Cables
FIRETIDE
Anixter No. Vendor No.
344736
PO-010-N
378360
PO-010-E
369148
PO-010-U
448478
7020-1001
489198
7020-1002
REPLACEMENT PARTS
Anixter No. Vendor No.
448473
SP-7200-03
D
448475
SP-7200-04
384871
SP-4100-01
403373
SP-2100-01
403375
SP-7200-02
403376
SP-7100-01
8.62
Description
7000 series outdoor-rated 10 m North
America AC power cable
7000 series outdoor-rated 10 m EU and
Korea AC power cable
7000 series outdoor-rated 10 m UK,
Singapore AC power cable
6-pin female DC power connector for
HotPort 7000 series
RF terminator - 50 ohms - N male
Description
7020 series replacement outdoor
clawtooth mounting kit
7020 series outdoor-rated replacement
5 m North America AC power cable
4100 series replacement indoor AC/DC
power supply adapter, kit of
international plugs - U.S., EU, UK, AUS
2100 series replacement indoor AC/DC
power supply adapter, kit of
international plugs - U.S., EU, UK, AUS
7020 series replacement weatherized
field-installable Ethernet
RJ45 connector
7010 series replacement indoor power
supply desktop brick 12 V DC
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Wireless Solutions - Wireless LAN/Point-to-Point/Multipoint
Software
./Management Software;Wireless/14242
Management Software;Wireless/18700
Index1.Networking Systems//Video Products//Video Security Systems
Index1.Networking Systems//Network Management//Management Software
HotView Pro Management Software
Network Management Software
FIRETIDE
PR21638V2-124464.tif
HOTVIEW PRO MESH MANAGEMENT SOFTWARE
The electronic license includes integrated HotPort mesh and HotPoint access point
or stand-alone HotPoint access point.
Anixter No. Vendor No.
384862
3000-9000-ELE-10
333051
3000-9000-ELE-30
Description
Per 10 nodes
Per 30 nodes
WARRANTY
Anixter No. Vendor No.
510077
RW-9941-1024
510078
RW-9941-2024
510079
RW-9941-3024
510080
RW-9941-4024
Description
RNMS BASIC with 24 months warranty
RNMS PLATINUM with
24 months warranty
RNMS PLATINUM BACKUP Package with
24 months warranty
RNMS PLATINUM including RNMS
PLATINUM BACKUP Package with
24 months warranty
SOFTWARE LICENSE FOR CAPACITY UPGRADES FOR RADWIN 5000 PRODUCTS
Anixter No. Vendor No.
Description
510081
RW-9961-0510
RADWIN 5000 HSU; License Capacity
Key from 5 Mbps to 10 Mbps
510082
RW-9961-1025
RADWIN 5000 HSU; License Capacity
Key from 10 Mbps to 25 Mbps
510083
RW-9961-0525
RADWIN 5000 HSU; License Capacity
Key from 5 Mbps to 25 Mbps
SOFTWARE LICENSE FOR CAPACITY UPGRADES FOR RADWIN 2000 PRODUCTS
Anixter No. Vendor No.
Description
510084
RW-9951-1025
Software License key for capacity
upgrade of A-series product from
10 Mbps to 25 Mbps
FIRETIDE MOBILITY CONTROLLER SOFTWARE
The electronic license includes integrated HotPort mesh and HotPoint access point
or stand-alone HotPoint access point.
Anixter No. Vendor No.
384864
SW-MC001-ELE-10
384865
SW-MC001-ELE-30
Description
Per 10 nodes
Per 30 nodes
Products. Technology. Services. Delivered Globally.
1.800.ANIXTER • anixter.com
8.63
Video Transmission, Media Conversion and Wireless
HotView Pro provides centralized management and control of single or multiple
Firetide mesh networks with an intuitive Web-based user interface. It is a
sophisticated, yet simple-to-use platform for configuring, monitoring and managing
HotPort mesh nodes, HotPoint access points and HotClient Customer Premises
Equipment (CPEs).
FEATURES
• Unique flow control, traffic prioritization and network management capabilities
• Ethernet Direct - allows interconnection with a 100 Mbps wired connection to
reduce hop counts
• Mesh bridge integration - connect multiple mesh networks into a
single environment
• End-to-end security - AES 128 or 256, WPA2 and/or WEP at 104/128 or
40/64 bits
• Unmatched mobility - real-time video from moving vehicles with
seamless roaming
• Highly flexible real-time mesh network management
• Intuitive GUI interface
• Single-point management of mesh and access products
RADWIN INC
The RADWIN Network Management Software (RNMS) enables service providers to
manage all RADWIN links in their network from a Network Operations Center (NOC).
With RNMS, service providers can monitor and configure up to 10,000 RADWIN links
from one location.
FEATURES
• Performance monitoring and trend reports
• Easy access to link and site information
• Simple interface to any SNMP device
Define Your Network
Video Migration Path
Through Anixter ipAssuredSM: Defining Network Video
Migration, you can pair leading technologies to create
a migration strategy that supports your current and
future video surveillance applications.
With Anixter ipAssured: Defining Network
Video Migration, you can:
• Chart a migration path for your video network
• Make informed purchasing decisions about
the products available in today’s rapidly
changing marketplace.
© 2013 Anixter Inc.
• Evaluate your existing video surveillance solutions
with Anixter’s Security HealthCheckSM
Helping you migrate from analog to network-based
video surveillance solutions.
Le about
Learn
ut Anixter’s
r’s ipAssured program by contacting your
representative
visiting anixter.com/ipassured.
local saless represent
ntative or vis
1.800.ANIXTER
anixter.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement