Инструкция к карте копирования программ TP-PCC

Инструкция к карте копирования программ TP-PCC
http://www.delta.com.tw/industrialautomation/
TP-PCC
Instruction Sheet
Program Copy Card
1
WARNING
Always read this manual before using the TP-PCC.
TP-PCC doesn’t support plug and play function. Please turn off power before plugging in TP02G or TP04G.
The voltage for TP-PCC is supplied from MPU extension slot. Please confirm TP-PCC plugged direction when
connecting to MPU extension slot to avoid serious damage.
2
INTRODUCTION
Model Explanation
Serial Number Explanation
TP-PCC 1 T 3 18 002
TP - PCC
Production series
Production weeks
Program copy card
Series name
T: Taoyuan
Production year (2003)
Production factory
Version
Production model
3
ELECTRICAL SPECIFICATIONS
Model Name
TP-PCC
Item
Data Reserved Life / Times for Writing In
20 years / one hundred thousand times
0ºC~55ºC
Operation Temperature
Weight / Dimension
4
3g / 50.85×19.8×10 mm
PROGRAM COPY CARD FUNCTIONS
Compatible firmware version: TP04G (V1.04 and above) / TP02G (V1.00 and above)
It is used to copy the whole HMI environment settings and application programs to another HMI rapidly. It can save much time
and manpower. The operation is in the following.
PCC:
Program Copy Card
TP:
TP Series
TP PCC (Copy HMI program to PCC)
PCC TP (Copy program in PCC to HMI)
1
Turn the switch on the PCC to TP PCC
Turn the switch on the PCC to PCC TP
2
Insert the PCC into the extension slot of TP
Insert the PCC into the extension slot of TP
3
Input the power to TP
Input the power to TP
4
Please turn off power and then remove when it
displays “remove PCC” on the screen.
Please turn off power and then remove when it displays
“remove PCC” on the screen.
1
TP PCC (Copy HMI program to PCC)
PCC TP (Copy program in PCC to HMI)
If the model type of TP does not correspond with the
model type of program of PCC.
(TP04G program and TP02G program can’t be used
each other)
TP will display:
TP series and PCC is different
Press Enter to Confirm
TP series PCC
Press Esc to Exit
If there is no program in PCC.
TP will display:
The PCC is Empty
PCC
TP series is illegal
If the model type of TP does not correspond with the
model type of program of PCC.
TP series and PCC is different
Please Remove the PCC
and Reboot
If the model type of TP corresponds with the model type
If the model type of TP corresponds with the model type
of program of PCC.
of program of PCC.
TP will display:
TP will display:
Press Enter to Confirm
Press Enter to Confirm
TP series PCC
TP series PCC
Press Esc to Exit
Press Esc to Exit
Press <Enter> to confirm to copy.
Press <Enter> to confirm to copy.
When executing “writing in” (data is transmitting and
When executing “writing in” (data is transmitting and
indication LED of RS-485 will light)
indication LED of RS-485 will light)
TP will display:
TP will display:
TP series PCC
PCC TP series
Please wait!
Please wait!
5
When completing transmitting, TP will display:
Please Remove the PCC and Reboot
When completing transmitting, TP will display:
Please Remove the PCC and Reboot
Please turn the power off and remove PCC from TP. At
this time, all program and system settings have copied
to PCC.
Please turn the power off and remove PCC from TP. At
this time, all program and system settings have copied
to PCC.
DIMENSION AND INSTALLATION
(Unit: mm)
2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement