A502 (PDF:753KB)
A502 新 04.8.19 2:04 PM ページ 1
Owner's Manual
Thank you for purchasing the A502 amplifier.
Please read this Owner's Manual before use.
Be particularly sure to read the Safety Instructions section.
Keep this Owner's Manual together with the Warranty in a safe place for later reference.
ENGLISH
A502 新 04.8.19 2:04 PM ページ 2
Foreword
■Contents
Important Safety Instructions ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯3
Notes on Use⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯6
Part Names and Functions/Connections ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯7
Specifications ⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯8
■Accessories
①Amplifier x1
⑤Warranty x1
②Volume knob x1
③Power supply x1
④Owner's Manual x1
WARNING : To avoid the danger of suffocation, keep plastic bags out of the reach of
children.
*This product is an amplifier which has been designed using time domain theory in
order to maximize speaker operation and performance.
《What is time domain theory?》
Time domain recreates the changes that occur in sound waves over time from the
moment of output until their disappearance. Its purpose is to reproduce those
sound waves that are as close as possible to the original recorded sound.
Time domain audio systems allow sound orientation and the nuances that are
added by recorded performers to be faithfully reproduced.
−2−
A502 新 04.8.19 2:04 PM ページ 3
・Explanation of Graphical Symbols
CAUTION
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION(for customers who concerned)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT FULLY INSERT.
1.
2.
3.
4.
5.
Read instructions
shock may result. Do not place flower vases,
All safety and operating instructions should be
potted plants, cups, cosmetics, drugs, containers
read before operating unit.
holding liquids, or small metal objects on or near
Follow instructions
the unit. Do not place any objects on the unit and
All operating and other instructions should be
do not insert or drop metal,combustible objects or
followed.
liquids into the unit as such actions can cause fire
Retain instructions
or electric shock. If liquid or foreign objects enter
The safety and operating instructions should be
the unit,disconnect immediately since continued
retained for future reference.
use may result in fire or electric shock. Do not
Warnings
place the unit on tuners, audio decks or other
All warnings on the unit and in the operating
electric equipment. Do not use the unit as a step
instructions should be adhered to.
or seat. The unit may tip over and cause damage
Power supply
or injury. Consult a company customer service
Power supply should be operated only from the
facility for interior inspection, adjustment or repair.
power source indicated on the marking label. If
6.
7.
Where not to use unit.
you are not sure of the type of power supply to
Do not use the unit in bathrooms, areas exposed
your home, consult your product dealer or local
to rain or snow, on the shore, near water or in
power company.
humid conditions. Do not place the unit in unstable
General care of unit
locations, in kitchens, near humidifiers, or in any
Do not open or modify the unit as fire or electric
location with likely exposure to smoke or steam.
−3−
ENGLISH
Important Safety Instructions
ENGLISH
A502 新 04.8.19 2:04 PM ページ 4
8.
Do not place the unit in direct sunlight, near
of the plug, wipe the plug with a dry cloth after
heating equipment or close to open flames. Fire
disconnection. Continued use may cause fire or
accident or malfunction may result. Do not place
electric shock.
the unit in locations exposed to cold air or direct
12. Danger signs
draft. Condensation, leakage current or thermal
If you notice a strange noise, smoke, unusual
damage may result. Do not use the unit in dusty or
odour or other abnormal condition, shut off the
dirty locations. Decreased heat ventilation can
unit, disconnect the power cord from the outlet
cause thermal damage or fire.
and have the unit inspected. Continued use may
result in fire or electric shock.
Unit heat
The bottom and sides of the unit can heat up
9.
13. Electric storms
during use and should not be touched. Burns may
During electrical storms disconnect the unit and
result. Only connect or disconnect speaker cables
avoid contact with the antenna and power cord.
after the power supply has cooled down.
Lightning can cause fire, electric shock, and
Moving the unit
malfunction.
When moving the unit, shut off power to all
14. Internal temperature rise
connected equipment, and disconnect power
To avoid internal temperature rise when installing
cords, connection cables, speaker cables and
the unit, leave space between the unit and walls
other wires. Moving the unit while cables are
or other equipment. When installed in a rack or
connected can cause damage to cables, fire or
similar fixture, leave a 10cm (4") or larger gap on
electric shock. The unit is heavy and care should
top and at sides since internal temperature rise
be taken when unpacking, moving or lifting.
can result in fire. The unit is provided with
Manufacturing also creates sharp areas on the
ventilation holes to prevent internal temperature
unit; use thorough care in handling.
rise. Blockage of these holes decreases
*Because the volume knob can be separated
ventilation and can result in fire. Note the
from the amplifier, never hold the volume knob
following.
when moving the amplifier.
*Do not place the unit in a poorly ventilated area
*Do not place the unit on carpeting or on bedding
10. Power cord
Only use the power cord supplied and do not
*Do not obstruct the ventilation holes
bend, twist,modify it for repair, or pin it under the
*Do not tilt the unit or turn upside down
unit. Heavy objects, heat or tension may also
15. Extended non-use
damage the power cord and cause fire or electric
If the unit is likely to be unused for an extended
shock. When disconnecting the power cord from
period, shut off power and disconnect from power
an outlet, do not pull the cord. Pulling on the cord
supply.
can damage it and cause fire or electric shock. Do
16. Volume Adjustment
not touch the power cord with wet hands. Do not
If abnormal noise is produced during play at high
place the power cord near heating equipment and
volume, reduce the volume level. Distorted sound
do not use the unit. If the plug fits loosely in an
can cause overheating of speakers and amplifier.
electric outlet or the plug or cord is hot. If the cord
Before switching power supply on, set the
is damaged, replace it as continued use may
amplifier volume to minimum. Sudden, loud noise
can cause damage to hearing.
result in fire or electric shock.
17. Connecting TV/other audio equipment
11. Unit plug
Insert the plug into an outlet all the way to its
When connecting a TV or other audio equipment,
base. Incomplete insertion can cause heat
always shut off power, read the operating manual
production, and dust build-up can cause fire.
for each device and follow the instructions for
Contact with the prongs of the plug can also
connection. Use only designated cables.
cause electric shock.
Use of non-designated cables or extension cables
can cause heat production, burns, and fire.
Do not connect the unit to an outlet where the
connection is loose even when the plug is inserted
18. Antenna
all the way to its base. Do not use the unit if the
An outdoor antenna should be located away from
plug is hot. Heat production can cause fire.
power lines.
If dust or metal accumulates on or near the prongs
−4−
A502 新 04.8.19 2:04 PM ページ 5
Before undertaking maintenance disconnect from
power supply. Have the interior of the unit cleaned
approximately once a year by qualified personnel.
Accumulated dust inside and long intervals
without cleaning can cause fire or malfunction.
Before cleaning this product make sure that the
power is turned off and the power cord is
disconnected from the wall outlet. Clean with a
soft cloth. If the product is particularly dirty,
moisten the cloth and wring out before use.
Complete by wiping with a soft, dry cloth. Do not
use liquid solvents such as alcohol or thinner to
clean this product, as such chemicals can damage
the cabinets.
20. Servicing
The unit should be serviced by qualified personnel
when:
*The power-supply cord or plug has been
damaged, or
*Objects or liquid have entered the unit, or
*The unit has been exposed to rain; or
*The unit is malfunctioning, or
*The unit has been dropped or the cabinet has
been damaged.
21. Children
Use particular care in households where children
are present.
22. Temporary Fault
If this product receives a strong external shock
(such as from an impact, static electricity or a
power surge due to lightning), or if this product is
used incorrectly, it may stop working properly.
In such cases, press the power button to turn the
power off and then back on again, and check if
this product is working normally.
−5−
ENGLISH
19. Maintenance.
ENGLISH
A502 新 04.8.19 2:04 PM ページ 6
Notes on Use
■Volume Setting
■Power supply
Before switching ON minimise the volume.
Sudden, large output can damage the
speakers.
This product is equipped with vibration
counter measures and a tone-quality
adjustment and has been designed to
provide a sense of integration when the
amplifier is placed on top of the power
supply.
The setup location has to be well ventilated
and dry.
■Volume Etiquette
To avoid disturbance in your neighbourhood,
enjoy your unit at an appropriate volume.
Remember that at night, even low volume
carries into surrounding areas.
Help to maintain a pleasant living
environment.
■Volume knob
Attach the volume knob to the amplifier as
shown in the following figure.
■Speaker Cord Connection
Always connect speaker systems with
power OFF.
If a speaker cable is inadvertently shorted,
the protection circuit in the amplifier will
operate, and audio output will stop
temporarily.
In this event, disconnect the power cord
from the outlet, correct the shorted area
and reconnect the power cord to the outlet.
−6−
A502 新 04.8.19 2:04 PM ページ 7
①Volume knob
①
Turn to the right…Increases volume
Turn to the left …Decreases volume
②Amplifier
③Power supply
④Power indicator
Power button "ON" :indicator lights
Power button "OFF"
②
⑤Power button
Turns the power supply ON/OFF
③
⑥Line input terminal(R)
Connect to audio source using cable with
RCA pin jack.
④
⑤
⑦Line input terminal(L)
Connect to audio source using cable with
RCA pin jack.
⑥
⑦
⑧Power cord
Connect the plug of the power cord to a
power supply socket.
※The shape of the power plug may be
different according to the country of
destination.
⑧
⑨Speaker output terminals
When connecting the speakers, insert the
ends of the speaker cables so that they do
not touch the speaker body or
neighbouring terminals.
Speaker cable
R+ R-
L-
L+
⑨
●CAUTION●
In order to protect internal parts, the volume knob
will separate from the amplifier if excessive force
is applied to the knob.
−7−
ENGLISH
Part Names and Functions/Connections
ENGLISH
A502 新 04.8.19 2:04 PM ページ 8
Specifications
■Specifications
Specifications and appearance are subject to change without prior notification.
[Amplifier]
Rated output:
30 W
(at 6 Ω load, T.H.D : 0.1%)
Max. output:
38 W
(at 6 Ω load, T.H.D : 10%)
Total high harmonic distortion: 0.08%(at 15 W output, 1kHz)
Frequency characteristics: 10Hz ∼ 100kHz (±3dB)
Input sensitivity:
270mVrms (at 30 W output)
Signal-to-noise ratio:
70dB
Separation rate:
70dB
Input impedance:
10k Ω
Applicable load impedance: 6∼8 Ω
Dimensions:
184mm(W)x167mm(D)x197mm(H)
[71/4"(W)x69/16"(D)x73/4"(H)]
Weight:
Approx. 2.5kg [51/2 lbs]
[Power supply]
Input voltage:
230V±10% (50Hz)
Output voltage:
+24V DC, -24V DC
Output current:
+2A DC, -2A DC
Dimensions:
215mm(W)x183mm(D)x97mm(H)
[815/32"(W)x73/16"(D)x313/16"(H)]
Weight:
Approx. 3.2kg [71/16 lbs]
−8−
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement