D1300
D1300 SERIES
RS-485 POINT-TO-POINT DATA TRANSCEIVER (2-WIRE)
PRODUCT SPECIFICATION
FEATURES
• Meets EIA RS-485 Specifications
• Meets NEMA TS-1/TS-2 & Caltrans Specifications
(Temperature/Humidity, Shock/Vibration, and
Voltage Transient Protection)
• Automatic Resettable Solid-State Current Limiters
• Power, Transmitter and Receiver Data Status
LED Indicators
• No In-field Electrical or Optical Adjustments Required
D
DESCRIPTION
The IFS D1300 series data transceivers provide point-to-point
transmission of half-duplex (2-wire) EIA RS-485 tri-state data signals
over one or two optical fibers. The transceivers are transparent to data
encoding allowing for broad-range compatibility. When used as a
line-terminating device, these modules are also compatible with the
IFS D2300 series drop and repeat data transceivers. Models within this
series are available for use with multimode or single-mode optical
fiber. Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. Each transceiver incorporates power
and transmit/receive data status indicating LED’s for monitoring
proper system operation. The modules are available in either
stand-alone or rack mount versions.
APPLICATION EXAMPLES
• Access Control Systems
• Building Automation and Environmental Control Systems
• Computer/Data Equipment
• Fire & Alarm Systems
• Traffic Signal Control Equipment
• Data Re-clocking
• Data rates up to 150 kbps NRZ
• Transparent to Data Encoding / Compatible with
Major Data Protocols
• Point-to-Point Network Architecture
• 2-Wire (Half-Duplex)
Available at:
www.
• True Tri-State Output
• Hot-Swappable Rack Modules
• Distances up to 25 Miles (40 km)
• Comprehensive Lifetime Warranty
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
ORDERING INFORMATION
OPTICAL
PWR BUDGET
DESCRIPTION
FIBERS
REQUIRED
RS-485 Transceiver (850 nm)
2
14 dB
2.5 miles (4 km)
RS-485 Transceiver (850 nm)
RS-485 Transceiver (1310 nm)
1
14 dB
2.5 miles (4 km)
D1320
RS-485 Transceiver (1310 nm)
2
13 dB
8 miles (13 km)
SINGLE-MODE D1325
9/125µm
RS-485 Transceiver (1310 nm)
2
14 dB
25 miles (40 km)
PART
NUMBER
D1300
MULTIMODE D1300WDMA
62.5/125µm** D1300WDMB
OPTIONS
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add -24 for 24 VDC Power (Extra charge, consult factory)
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected]
Europe, Middle East, Africa TEL +44(0) 1732 522 777 ■ Asia Pacific TEL +65 6235 2661
Australia TEL +61 2 9836 0600 ■ Latin America TEL (512) 477-8787
MAX.
DISTANCE*
D1300 SERIES
RS-485 POINT-TO-POINT DATA TRANSCEIVER (2-WIRE)
TECHNICAL SPECIFICATION
SPECIFICATIONS
ELECTRICAL & MECHANICAL
DATA
Data Interface:
Data Rate:
RS-485 (2 wire)
DC - 150 kbps
Total Network
Pulse Distortion:
<1µs
Power:
Surface Mount:
WAVELENGTH
D1300 and D1300WDMB:
All Others :
850 nm, Multimode
1310 nm, Multimode or Single-mode
NUMBER OF FIBERS
2
12 VDC @200 mA
Rack:
Number of Rack Slots:
Current Protection:
From Rack
1
Automatic Resettable Solid-State Current
Limiters
Circuit Board:
Size (in./ cm.) (LxWxH):
Surface Mount:
Rack Mount:
Shipping Weight:
Meets IPC Standard
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm.
< 2 lbs./0.9 kg
ENVIRONMENTAL
CONNECTORS
Optical:
Data and Power:
ST
Terminal Plug with screw clamps
MTBF:
Operating Temp:
>100,000 hours
-40° C to +74° C
Storage Temp:
Relative Humidity:
-40° C to +85° C
0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘C’ to model
number for conformal coating.
AGENCY COMPLIANCE
Federal Supply Schedule
MADE IN THE USA
Contract No. GS-07F-0049M
Complies with FDA Performance Standard for Laser Products,
Title 21, Code of Federal Regulations, Subchapter J
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
MODEL
Multimode
62.5/125µm**
850 nm
850 nm
1310 nm
TRANSCEIVER
OUTPUT PWR SENSITIVITY
D1300
D1300WDMA
D1300WDMB
25 µw
(-16 dBm)
D1320
20 µw
(-17 dBm)
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
14 dB
13 dB
14 dB
2.5 miles (4 km)
1 µw
(-30 dBm)
8 miles (13 km)
14 dB
1310 nm
Single-mode
9/125µm
25 µw
(-16 dBm)
D1325
25 miles (40 km)
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
up to 2.5 miles
(4 km)
D1300
ifs
D1300
International
ifs
Fiber
Systems
Incorporated
International
Fiber
Systems
Incorporated
203.426.1180
203.426.1180
Control
Data
2 Fibers
62.5/125µm MM
Control
Data
Host
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
07/01/04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement