Kawneer Arch Manual Warranty and Remedy (English)

Kawneer Arch Manual Warranty and Remedy (English)
6
GENERAL INFORMATION
LIMITED WARRANTY AND REMEDY
FEBRUARY, 2013
EC 97911-47
THE WARRANTIES SET FORTH IN THIS LIMITED WARRANTY AND REMEDY ARE IN LIEU OF ALL OTHER REPRESENTATIONS,
WARRANTIES OR OTHER AGREEMENTS EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, WHICH ARE HEREBY
DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
In addition to Seller’s standard Limited Warranty and Remedy, and applying solely and exclusively to Kawneer doors with welded,
corner construction, the corner construction joinery of these doors shall be free from material defects in workmanship and material for
the normal, useful life of the door.
In addition to Seller’s standard Limited Warranty and Remedy, and applying solely and exclusively to Kawneer Flushline doors, the corner
construction joinery, core and laminate shall be free from material defects in workmanship and material for the normal, useful life of the door.
This Limited Warranty does not cover, and Seller hereby disclaims all liability for, the installation of Seller products, any particular
application or selection of the product for any particular project or design, any parts, gaskets, glazing materials, components or sealants
of other manufacturers used with Seller products, or any lack of performance of Seller products attributable to such items. Seller
products are produced for commercial applications. This Warranty does not cover, and Seller hereby
disclaims all liability for, any products used in residential individual detached single family dwellings,
any products which have been subject to abuse, alteration, neglect, misuse, abnormal use, accident,
fire, war, flood, earthquakes, acts of God, or to which parts, not supplied by Seller have been added,
or to defects caused by depreciation or normal wear. All decisions regarding the existence of defects in material and
workmanship and the occurrence of any of the matters described in the preceding paragraphs or affecting this Limited Warranty shall
be made by Seller and shall be final and binding upon all parties.
The sole and exclusive remedy with respect to this Limited Warranty or with respect to any other claim relating to defects or any other
condition or use of the products supplied by Seller, however caused, and whether such claim is based upon breach of representation,
warranty, condition, contract (fundamental or otherwise), tort (including negligence), strict liability, or any other theory is limited to, at
Seller's option, repair or replacement of such products or repayment by Seller of the purchase price paid for it. The remedy with respect
to claims made relating to Seller doors excludes the replacement of glass, gaskets, hardware, immediate framing, temporary enclosures
or any related labor or installation costs. In no event does Seller’s warranty cover the cost of labor or sundry materials required to remove
and/or replace any defective product.
The products repaired, replaced, or otherwise restored shall be warranted to the same extent and to the expiration date from the original
date of shipment, and this Limited Warranty shall not be deemed to have been extended from the date of such warranty work. At no time
does this Limited Warranty confer upon the claiming party or any other party the right to proceed with repair, replacement, or restoration,
without written notice and agreement by a duly authorized officer of Seller. Any such work undertaken by the claiming party or any other
party shall be for the claiming party's own account and shall result in this Limited Warranty becoming null and void.
SELLER'S AGGREGATE TOTAL CUMULATIVE LIABILITY UNDER THIS LIMITED WARRANTY IS LIMITED TO THE DOLLAR
AMOUNT OF THE PURCHASER'S ORIGINAL PAYMENT MADE TO SELLER FOR PRODUCT FURNISHED BY SELLER ONLY.
IN CONSIDERATION OF THIS LIMITED WARRANTY, SELLER SHALL NOT BE LIABLE FOR SPECIAL, DIRECT, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, INCLUDING BUT NOT LIMITED TO LOSS OF USE, LOSS OF
PROFITS OR GOODWILL, DAMAGES FOR NEGLIGENCE IN THE MANUFACTURE, DESIGN, OR INSTALLATION OF THE
PRODUCTS, OR OTHER COMMERCIAL LOSS OR INJURY.
kawneer.com
© Kawneer Company, Inc., 2013
This limited warranty (“Limited Warranty”) applies only if Seller's products are installed and maintained according to Seller's recommended
practices and installation instructions, and only to defects appearing within two (2) years from substantial completion of the project and
only if Seller is notified in writing within sixty (60) days after such defects either (i) appears or (ii) should have been discovered after the
exercise of reasonable diligence. Failure of the claiming party to notify Seller within such period shall automatically relieve Seller of any
and all responsibility and/or liability under this Limited Warranty.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
This is to certify that Kawneer Company, Inc. or its applicable affiliate or subsidiary selling the product ("Seller") warrants to its
Customers and all subsequent purchasers and owners of the project incorporating Seller products (hereinafter “Customer(s)”), subject
to every term, condition and limitation stated herein, that the products supplied by Seller shall be free from material defects, in material
and workmanship, for a period of two (2) years from the date of substantial completion of the project, provided however, that the Limited
Warranty shall begin in no event later than six (6) months from the date of shipment by Seller for the start of the warranty period hereunder.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
LIMITED WARRANTY AND REMEDY
FEBRUARY, 2013
EC 97911-47
GENERAL INFORMATION
7
LIMITED WARRANTY AND REMEDY
Laws and building and safety codes governing the design and use of glazed entrance, windows, and curtain wall products vary widely.
Seller does not control the selection of product configurations, operating hardware, or glazing materials and assumes no responsibility
therefore.
All notices given under or pursuant to this Limited Warranty shall be in writing and sent by registered mail, postage paid, and with return
receipt request, to the party to whom such notices is to be given. All such notices as set forth above shall be considered served when
received.
SALES TERMS AND CONDITIONS
These Sales Terms and Conditions shall be the sole terms and conditions governing the sale of goods by Kawneer Company, Inc. or
any of its subsidiaries and affiliates (“Seller”) selling Products to a purchaser (“Customer”). The identity of Customer, the identity of the
goods being purchased (the “Products”), the quantity of Products being purchased, the destination for delivery of the Products, and other
material information concerning Customer’s order shall be set forth in Customer’s purchase order (the “Purchase Order”) and provided
to Seller. These Terms and Conditions are hereby incorporated into and made a part of each such Purchase Order.
All orders are subject to approval and acceptance by a duly authorized representative of Seller. Upon the earlier of Seller’s written \
acceptance of the Purchase Order or acceptance by Customer of Products furnished by Seller in response to such Purchase Order,
the Purchase Order, the written acceptance, if any, and these Terms and Conditions shall be the complete and final agreement (the
“Agreement”) between Seller and Customer with respect to the purchase and sale of Products identified in the Purchase Order, provided,
however, that any pre-printed or form language appearing in Customer’s Purchase Order shall not become a part of the Agreement.
SELLER’S ACCEPTANCE OF ANY CUSTOMER PURCHASE ORDER IS EXPRESSLY MADE CONDITIONAL UPON CUSTOMER’S
ACCEPTANCE OF THESE TERMS AND CONDITIONS, AND SELLER OBJECTS TO ANY ADDITIONAL OR DIFFERENT TERMS AND
CONDITIONS, WHETHER CONTAINED IN CUSTOMER’S PURCHASE ORDER OR OTHERWISE. SELLER WILL NOT BE DEEMED
TO HAVE WAIVED THESE TERMS AND CONDITIONS OF SALE IF SELLER FAILS TO OBJECT TO PROVISIONS CONTAINED IN
CUSTOMER’S PURCHASE ORDER, OTHER FORMS OR OTHERWISE. It is Customer's obligation to sign this sales agreement but
Customer's acceptance of the product will constitute Agreement to these terms whether Customer has signed sales Agreement or not.
DETERMINATION OF PRICE – Prices given herein are list prices, unless otherwise specified, and are subject to discounts
prevailing at the time the order is received. Prices shown do not include Provincial Sales Tax or Goods & Services Tax or any other tax or
government charge upon the production, sale or shipment of material which is effective within the life of the sales contract, all of which
will be paid by the Customer. All prices are subject to change without notice, and are not guaranteed against change. Inventory adjustments will not be made. Stenographic and clerical errors made by Seller on an acknowledgement or invoice shall be subject to correction.
NOTE: In the event that a discrepancy arises between the index and the body of the price catalog, the information contained in the body
of the catalog will take precedence.
PRICE PROTECTION – In the event of a price decrease, unshipped orders, with the exception of special sales contracts covered by a
lot or job estimates, will be invoiced at the new and lower prices. In the event of a price increase, orders on hand will be invoiced at the
prices in effect when the orders were received, provided, however, those shipments are made at Seller’s convenience thereafter. Seller
quotations on specific jobs made in writing by Seller are valid (or firm) for sixty (60) days.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
This is the only warranty made in the connection with the sale and distribution of the Seller Products. No representative or any other
person is authorized to make or makes any warranty, representation, or promise with respect to the Seller Products. No terms or
conditions other than those stated herein, and no agreement or understanding, oral or written, in any way purporting to modify this
warranty shall be binding on Seller unless made in writing and signed by a duly authorized officer of Seller.
ACCEPTANCE OF ORDERS – The acceptance of orders constitutes a complete and binding contract which cannot be modified or
canceled without written consent of Seller, except that all orders are accepted subject to delays caused by strikes, fires or any other
causes (including those set out in the section “Force Majeure” below) beyond the control of Seller. All orders are accepted subject to
governmental regulation on material usage, whenever applicable.
MINIMUM ORDER SIZE – Orders of less than $100.00 list price will be billed at list price with no discount. All painted orders will be
invoiced at a minimum of $500.00 net per paint color.
PAYMENT – Seller stated payment terms are Net 30 day from date of invoice, unless otherwise approved in writing by a duly authorized
representative of Seller. Early payment discounts are available. Please contact the Seller Credit Department for additional information.
Receipt of payment by the purchaser is not a condition of payment to Seller. Purchaser’s unsatisfactory credit status shall be cause for
cessation of deliveries.
kawneer.com
8
GENERAL INFORMATION
LIMITED WARRANTY AND REMEDY
FEBRUARY, 2013
EC 97911-47
DELIVERY – Orders should include complete shipping instructions. Seller reserves the right to ship as it deems advisable unless
specific instructions are given. Seller will use reasonable efforts to meet delivery dates but such dates are deemed approximate and Seller
shall be allowed a reasonable variance from all such dates. In no event is Seller subject to any charges, penalties, liquidated damages,
back charges, penalties or liability of any kind for delayed delivery. Seller shall not be liable for damages caused by delays in delivery by
carriers. Customer will file claims with carrier for all shortages, damages or delays delivered by common carriers.
FORCE MAJEURE – Seller shall not be liable for delays or inability to perform due to strikes, labor disputes, lockouts, fire, flood, war,
declared or undeclared, insurrections, riots, acts of God, embargoes by foreign nations, inability to obtain or unusual delay in obtaining
materials, shortages of power needed to operate Seller facilities, governmental regulations or priorities, or any other cause beyond the
control of Seller. In case of any delays in receipt or shortages of materials or shortages of power needed to operate Seller facilities,
Seller reserves the right in it sole discretion to determine the assignment of materials, and the order of priority in filling orders. Seller
also reserves the right in it sole discretion to cancel order by written notice in the event Seller believes that by reason of the foregoing it
will not be able to meet the scheduled completion date.
INDEMNIFICATION – Customer is solely responsible for proper selection and installation of Seller products as well as the incorporation
of Seller products into other products (if this is applicable). Customer agrees that it will use Seller products only for their intended uses
and according to specifications and limitations established by Seller from time to time. Customer acknowledges and agrees that Seller
Products are to be used for commercial applications and not intended for residential individual single family dwellings. Customer shall
indemnify, defend and hold Seller harmless from and against any and all damages arising out of or relating to use in residential individual
single family dwellings, improper product selection, application, use, misuse, neglect, abuse of products or incorporation of products.
NO LIABILITY FOR LOCAL LAWS OR CODES – Laws and building and safety codes governing the design and use of glazed entrance,
window and curtain wall products vary widely. Seller does not control the selection of product configurations, operating hardware or
gazing materials, and assumes no responsibility therefore.
It is the responsibility of the Customer to determine at the time of order entry or revision, whether Seller material and products meet any
federal, state, provincial and /or local law interpretation and regulations, including those relating to building construction, safety and to
the Americans with Disabilities Act of 1990 and any other similar federal, state, provincial or local statutes.
ORDER CANCELLATION AND CHANGE CHARGES – In the event a Customer changes an order or cancels or partially cancels an
order that has already been accepted by Seller, Seller may assess a charge to the Customer for costs incurred in performance of that
portion of the order that has been changed or cancelled up to and until the time Seller receives notice of the change or cancellation.
Customer orders for special materials (those not described in the effective price book), or for products fabricated specifically to
Customer’s dimensions or other specifications, or where special materials or services are procured by Seller for use on Customer’s
order, or where drafting or take-off services have been performed, will be subject to charges for cancellation or change for those costs
incurred in performance of that portion of the order that has been cancelled or changed up to and until the time Seller receives notice
of the change or cancellation.
SECURED CREDIT TERMS – No cash discount is allowed on merchandise delivered by truck, C.O.D. (including Parcel Post and Rail
Express), and sight draft bill of lading on a net basis.
BALANCE DUE MATERIALS – Any portion of an order not included in an original shipment because of shortage of stock or other cause
beyond Seller’s control will be invoiced at the same price and on the same terms as if included in the original shipment. If the balance due
shipment weighs 100 pounds or more, the transportation charge will be based on the combined weight of the original and balance due
shipments. If the balance due shipment weighs less than 100 pounds, Seller will prepay and absorb the freight on that portion of the order.
kawneer.com
© Kawneer Company, Inc., 2013
CLAIMS – No claims due to errors, shortages or rejection because of defects or defective materials ascertainable on visual inspection
will be considered unless reported to Seller within ten (10) days after receipt of shipment. Claims for damages resulting from delays or
use of defective materials will not be honored.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
FREIGHT CHARGES AND RISK OF LOSS – Unless stated otherwise, all items are shipped F.O.B. Seller manufacturing facility or
service center.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CREDIT CARD PAYMENT (U.S. Customers Only) – Seller will accept credit card payments. Credit Card invoices are paid immediately
upon shipment. No early payment discounts are available with credit card payments. Please contact the Seller Credit Department for
additional information.
FEBRUARY, 2013
9
LIMITED WARRANTY AND REMEDY
RETURNED MATERIAL – Seller will not accept any material retuned for credit unless such return has been previously authorized in
writing by Seller. Returns must be requested by Customer within thirty (30) days of receipt of material. Customer must return material
within thirty (30) days of receipt of written authorization from Seller. Material returned under such an authorization will be subject to regular
inspection by Seller. If found saleable without requiring reconditioning or further work, credit will be issued in the amount invoiced less
a handling charge of 15% returned material charge or $100.00 net, whichever is greater. No credit will be issued for goods produced
to order, not meeting inspection requirements or for goods received more than thirty (30) days after authorization to return. All shipping
charges for returns are the responsibility of the Customer.
INSTALLATION – Seller herby disclaims all liability for, and is not responsible or liable for, any damages or costs that may result from
improper installation of its products. It is the responsibility of the Customer purchasing a Seller product to ensure that the Seller product
is installed properly and in accordance with Seller's printed instructions. This responsibility is retained by Customer even though the
product may be resold for installation by a third party. Seller will not be liable for damages and costs that result from improper installation
of Seller products, regardless of who actually performs the installation.
RESIDENTIAL USE - Seller herby disclaims all liability for, and is not responsible or liable for, any damages or costs that may result
herein from use of its products in residential individual detached single family dwellings.
ENTIRE AGREEMENT – The Limited Warranty and Remedy and Other Terms and Conditions set forth the entire agreement between
the Customer and Seller relating to the sale of Seller’s products to Customer. Any additional or different terms in the Customer’s forms
are hereby deemed to be material alterations and notice of objection to them and rejection of them is hereby given.
GOVERNING LAW AND VENUE – The sale of Seller products hereunder with shipping addresses located in the United States shall
be governed by the laws of the Commonwealth of Pennsylvania, excluding its laws related to choice or conflicts of law. The sale of
Seller products hereunder with shipping addresses located in Canada shall be governed by the laws of Ontario and the federal laws
of Canada applicable therein. The United Nations Convention on Contracts for the International Sale of Goods is expressly disclaimed
and does not apply to the sale of Seller products. Any and all disputes between the parties that may arise pursuant to this order will be
heard and determined before an appropriate arbitrator, federal, or state court located in Pittsburgh, Pennsylvania. The Customer hereto
acknowledges that such court has the jurisdiction to interpret and enforce the provisions herein and/or an arbitrator’s judgment, and the
Customer waives any and all objections that they may have as to personal jurisdiction or venue in any of the above courts.
ATTORNEY’S FEES – If any action or proceeding is commenced to enforce or interpret any of the provisions of this agreement, and
Seller is the prevailing party in any such action or proceeding, then Seller shall be entitled to recover its reasonable attorneys’ fees,
expert witness fees, costs of suit and expenses, in addition to any other relief to which Seller may be entitled. As used herein, Seller is
a “prevailing party” when, including but without limitation, a party dismisses an action against Seller for recovery hereunder in exchange
for payment of the sums allegedly due, performance of covenants allegedly breached, or consideration substantially equal to the relief
sought in the action brought by such party.
MISCELLANEOUS – (a) Headings used herein are for convenience only and shall not be used for interpretive purpose. (b) A party’s
failure to act with respect to another party’s breach of any provision contained herein does not constitute a waiver. (c) If any provision
herein is held to be invalid or unenforceable, such provision shall be narrowly construed, if possible, or otherwise deemed ineffective
and the remaining provisions shall not be affected. (d) These terms and conditions will survive the fulfillment of any purchase order.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-47
GENERAL INFORMATION
CORRECTIVE FIELD LABOR
All corrective field labor and repairs are subject to the limitations set forth in the Limited Warranty and Remedy. In cases where a
material defect covered under Seller’s Limited Warranty and Remedy is detected after a product has been installed such that corrective
field labor is required, the following procedure must be followed in order for any adjustment to be applied to the Customer’s account:
A. When Anticipated Labor Is Eight (8) Hours or Less – No preauthorization by Seller is required however, the Customer must submit
detailed information to the Seller Credit Department, including details of the defect covered under the applicable Seller warranty and a
description of the required corrective field labor, in order for any adjustment to be applied to the Customer’s account.
kawneer.com
GENERAL INFORMATION
10
LIMITED WARRANTY AND REMEDY
FEBRUARY, 2013
EC 97911-47
Step 1 – On page 12 is a checklist of information that must be provided to the Customer Service Coordinator. Please have this
information available prior to calling.
Step 2 – The Customer Service Coordinator will evaluate the anticipated corrective action as well as related costs and alternatives
to rework and will determine which of the following procedures will be followed:
a. If it is determined that the Customer should perform the rework, the Customer will be authorized by the Customer Service
Coordinator. Written confirmation will follow immediately.
b. If it is determined that Seller will do the rework, the Customer will be notified accordingly and a schedule determined.
The Customer’s cooperation in following these procedures will assist Seller in reducing the time required to accomplish corrective
measures and make it possible for proper reimbursement to be applied.
SELLER INVOICES SHALL NOT BE ADJUSTED BY CUSTOMER AND PAYMENT IN FULL IS DUE AS SET FORTH UNDER THESE
TERMS AND CONDITIONS. WHEN CORRECTIVE FIELD LABOR IS REQUIRED, SELLER AGREES TO MAKE APPROPRIATE
CREDITS OR OTHER ADJUSTMENTS TO INVOICES, PROVIDED THE PROCEDURE DESCRIBED ABOVE IS FOLLOWED BY THE
CUSTOMER. SHOULD THIS PROCEDURE NOT BE FOLLOWED, CREDIT OR REIMBURSEMENT WILL NOT BE MADE BY SELLER,
NOR WILL ANY CLAIM FOR SUCH BE CONSIDERED VALID. (see Step 2.a.)
TOOLS AND DIES – Charges made for dies and tools do not convey to the Customer title or the right to remove them from the Seller facility.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
B. When Anticipated Labor Is More Than Eight (8) Hours – A Seller Customer Service Coordinator must be contacted prior to the
performance of any corrective field labor.
SAMPLES – Standard samples are available at cost (net). Standard samples are shipped from the Seller Marketing Communications
Department in Norcross, Georgia. Custom samples are not available through the Marketing Communications Department and must be
ordered on a standard order form.
For special length anodized material requirements, the following charges apply:
1-25 stock lengths:
Use part number 036426,
$200.00 net set up charge per shape.
No set up charge.
More than 25 stock lengths:
CUT-TO-SIZE ORDERS – Orders for materials cut-to-size will be billed at the Customer’s CMP price per foot. In addition, a $35 net price
per cut piece charge will be applied to the invoice under part number 036425 and cut offs will not be shipped.
SHOP DRAWINGS – Seller products may be detailed by Seller to confirm specifications. In such cases, drawings will be submitted to
the Customer for approval. Seller will fabricate in accordance with dimensions and specifications shown on the Customer approved
drawings but will take no responsibility for failure of the Customer to check drawings against job site conditions or for any other purpose.
Special entrances cannot be scheduled for production until the approved detail, with the Customer’s signature, has been received, and
all special hardware is in Seller’s possession. Changes made to any drawing after approval of details by Customer may involve additional
charges on the order.
DOUBLE BOX CHARGE – Seller offers a double box option for additional protection of your material during shipment. Use part number
036598 at $20.00 list. The charge will be applied per box.
ILLUSTRATIONS – The illustrations within this catalog are for part identification only, and do not indicate size or proportions by comparison.
kawneer.com
© Kawneer Company, Inc., 2013
For special length painted material requirements, consult with a Seller Customer Service Coordinator for pricing.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SPECIAL LENGTH CHARGES:
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
FEBRUARY, 2013
kawneer.com
GENERAL INFORMATION
EC 97911-47
LIMITED WARRANTY AND REMEDY
FINISH GROUPS
GROUP NO. DESIGNATION
FINISHES INCLUDED
#17 GRP
#17 CLEAR
#40 GRP
#40 BRONZE
BW - BONE WHITE
#22 STD. PAINT
#14 CLEAR
#29 GRP
#29 BLACK
#18 CHAMPAGNE
#26 LIGHT BRONZE
#28 MEDIUM BRONZE
11
GENERAL INFORMATION
FEBRUARY, 2013
LIMITED WARRANTY AND REMEDY
EC 97911-47
CORRECTIVE FIELD LABOR — PRE AUTHORIZATION FORM
CUSTOMER NAME:______________________________________________________________________________________
JOB NAME:_____________________________________
FAX INFORMATION
S.O. NUMBER:___________________________________
Phone No.:_______________________________________________
PRODUCT(S):___________________________________
To:_____________________________________________________
______________________________________________
No. of Pages:_____________________________________________
Co.:____________________________________________________
Dept.:___________________________________________________
______________________________________________
Fax No.:_________________________________________________
______________________________________________
From:___________________________________________________
Co.:____________________________________________________
Phone No.:_______________________________________________
Fax No.:_________________________________________________
ELEVATION, DOOR NUMBER OR UNIT MARK:_________________________________________________________________
_____________________________________________________________________________________________________
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
NAME OF PERSON CALLING AND PHONE NUMBER:____________________________________________________________
_____________________________________________________________________________________________________
EXACTLY WHAT IS WRONG (I.E., MULLION IS 120" AND SHOULD BE 118". NOT, MULLION IS TOO LONG):_________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
IF HARDWARE: NATURE OF PROBLEM -- IF MISLOCATED, WHERE? MEASURE AND FURNISH EXACT DIMENSIONS._________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
CAN IT BE CORRECTED IN THE FIELD? IF SO, YOUR RECOMMENDATION, ESTIMATED HOURS AND HOURLY RATE TO REPAIR.
FIELD CORRECTION
¨ YES
¨ NO
EST. HOURS:_____________________________
HOURLY RATES:___________________________
WHEN DO YOU NEED TO START THE REWORK?_______________________________________________________________
_____________________________________________________________________________________________________
_____________________________________________________________________________________________________
kawneer.com
© Kawneer Company, Inc., 2013
_____________________________________________________________________________________________________
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement