Motorola I876 - SOUTHERNLINC User`s guide

Motorola I876 - SOUTHERNLINC User`s guide
i876
User’s Guide
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONE
The SIM card provided in this kit is intended for use
with the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,
i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located
in this user’s guide for complete details.
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i876
Model Number: H92XAH6RR4AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
HELLOMOTO
Introducing your new Motorola i876 wireless phone. Here’s a quick anatomy lesson.
Left Soft Key
Perform function
in lower left
display.
Right Soft Key
Perform function
in lower right
display.
Camera Key
Volume Keys
Menu Key
From home screen,
open main menu.
Talk Key
Make &
answer calls.
End/Power Key
End calls, exit
menu system,
turns phone
on/off.
4-Way
Navigation Key
Mini USB Connector
Connects charger
and accessories
OK Key
In menus & lists,
press to select
highlighted option.
Smart Key
Speaker On/Off
Key
Camera
Spotlight
Camera
Lens
Volume
Buttons
PTT
Button
Audio Jack
Memory Card Slot
Speaker
1
check it out
Home Screen
Main Menu
2
READY
4/25/07
04
05 pm
1
2
Customizable O key
that can be used to
to open the
Settings screen
Press and hold the
Power Key E for a
few seconds, or until
the screen lights up,
to turn on your
phone.
Recent Calls
B
3
Press the Navigation Key
up, down, left or right ( )
to highlight a menu feature.
4
Press the O key
to select.
BLeqjpTmG
More
Exit
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for hearing impaired)
1-800-461-4575 (Canada)
Product Support: www.motorola.com/iden
Certain mobile phone features are dependent on the capabilities
and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider,
and/or the provider's network settings may limit the feature’s
functionality. Always contact your service provider about feature
availability and functionality. All features, functionality, and other
product specifications, as well as the information contained in this
user's guide are based upon the latest available information and
are believed to be accurate at the time of printing. Motorola
reserves the right to change or modify any information or
specifications without notice or obligation.
This device supports Bluetooth 2.0 including EDR and A2DP Stereo
profiles. In order for Bluetooth devices to communicate with one
another, they must utilize the same Bluetooth profile. To determine
the profiles supported by other Motorola devices, visit
www.hellomoto.com/bluetooth. For other devices, contact their
respective manufacturer.
Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth-enabled devices, and/or the
functionality of such features may be limited in certain devices, or
by certain wireless carriers. Contact your wireless carrier about
feature availability and functionality.
OPEN SOURCE SOFTWARE INFORMATION
You may choose to obtain a copy of any source code being made
publicly available by Motorola directly from the Motorola website
opensource.motorola.com.
Additionally, for instructions on how to obtain a copy of any source
code being made publicly available by Motorola related to
software used in this Motorola mobile device, please send your
request in writing to:
MOTOROLA, INC.
OSS Management
600 North US Hwy 45
Libertyville, IL 60048
USA.
Motorola has created the www.opensource.motorola.com
to serve as a portal for interaction with the software communityat-large.
To see additional information regarding licenses,
acknowledgments and required copyright notices for open source
packages used in this Motorola mobile device, follow these
instructions:
From the phone Main Menu, select Games and Apps. >
OpenSourceNotices.
3
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other Javabased marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2007.
Manual Number: NNTN7280B
Software Version: AP: DB2.00.42, BP: DB3.00.42
CP Version: 38.04.03
USR Version: U00A.00.00
Electrical Requirements:
Lithium Ion Battery 3.7V
Power Adapter: 100-240V ~ 50-60Hz, 0.3A
Output of the Adapter: 5V 850mA
4
contents
check it out . . . . . . . . . . . 2
menu map. . . . . . . . . . . . 7
Use and Care . . . . . . . . . 9
essentials . . . . . . . . . . . 10
about this guide . . . . . 10
SIM card . . . . . . . . . . . 11
memory card . . . . . . . 11
battery . . . . . . . . . . . . 13
turn it on & off . . . . . . 17
enable security . . . . . . 17
make a phone call. . . . 18
answer a phone call . . 18
make a private call . . . 18
answer a private call. . 20
store a phone
number or private ID . 20
call a stored phone
number or private ID . 21
your phone number and
Private ID . . . . . . . . . . 22
text messages . . . . . . 22
manage memory . . . . 25
use your phone as USB
mass storage device . 26
using your handset
as a modem . . . . . . . . 27
main attractions . . . . . . 29
music player . . . . . . . . 29
media center . . . . . . . 36
camera . . . . . . . . . . . . 39
PTV features. . . . . . . . 43
one touch PTT . . . . . . 51
PT manager . . . . . . . . 53
MMS . . . . . . . . . . . . . 53
bluetooth® . . . . . . . . . 69
clock screen saver . . . 73
basics. . . . . . . . . . . . . . .
display . . . . . . . . . . . .
main menu . . . . . . . . .
text entry . . . . . . . . . .
navigation key. . . . . . .
handsfree speaker . . .
transmitters . . . . . . . .
use GPS with map
software . . . . . . . . . . .
features for the
hearing impaired. . . . .
features for the
vision impaired . . . . . .
calls . . . . . . . . . . . . . . . .
turn off a call alert. . . .
recent calls . . . . . . . . .
redial. . . . . . . . . . . . . .
caller ID . . . . . . . . . . .
contents
75
75
76
76
79
79
79
80
82
83
85
85
85
86
86
5
call forward . . . . . . . . 86
voice names . . . . . . . 87
emergency calls . . . . 88
international calls. . . . 88
speed dial . . . . . . . . . 89
voicemail . . . . . . . . . . 89
selective dynamic
group (SDG) calls. . . . 90
customize. . . . . . . . . . . 95
volume. . . . . . . . . . . . 95
ring tones . . . . . . . . . 95
wallpaper . . . . . . . . . . 97
datebook . . . . . . . . . . 97
hide or show
location information. . 98
other features . . . . . . 100
advanced calling . . . 100
alarm clock . . . . . . . 101
contacts. . . . . . . . . . 102
datebook . . . . . . . . . 103
GPS . . . . . . . . . . . . . 104
handsfree . . . . . . . . 105
6
contents
memory card . . . . . . 106
pc applications. . . . . 107
personalize . . . . . . . 107
TTY . . . . . . . . . . . . . 107
security . . . . . . . . . . 108
Safety and General
Information . . . . . . . . 110
Service & Repairs . . . 115
Specific Absorption
Rate Data . . . . . . . . . . 116
Limited Warranty Motorola
Communications Products
(International) . . . . . . 118
Hearing Aid
Compatibility . . . . . . . 122
Information From the
World Health
Organization . . . . . . . 124
Patent and Trademark
Information . . . . . . . . 126
Privacy and
Data Security . . . . . . . 127
Smart Practices While
Driving . . . . . . . . . . . . 128
index. . . . . . . . . . . . . . 130
menu map
main menu
B Recent Calls
L Contacts
E
1
j
p
• [New Contact]
• [New SDG List]
Messages
• [Create Message]
• Voice Mail
• Inbox
• Drafts
• Sent Items
• Net Alert
• Text Msg
Web
Multimedia
• Media Center
• Camera
• Audio Player (Music Player)
• Ring Tones
• VoiceRecord
Push To Talk
• Call Alert
• PT Manager
• Quick PTT
• PTT Options
T
m
Games and Apps
• Buy More
• Alarm Clock Plus
• Audio Player
• Photo Editor
• OpenSourceNotices
Tools
• My Info
• My Name
• Line 1
• Line 2
• Private ID
• Group ID:
• Carrier IP
• IP1 Address
• IP2 Address
• Profiles
• [New Profile]
• Standard
• Car
• Meeting
• Office
• Outdoors
• Headset
• PRVT Only
• CNTCS Only
• Alarm Clock Plus
• Bluetooth
• Audio Devices
• Pair to Devices
• Device History
• Setup
• Find Me
u
• GPS
• Position
• Privacy
• Interface
• Datebook
• Last Call
• Phone Reset
• Phone Lifetime
• Prvt/Grp Reset
• Prvt/Grp Lifetime
• Kbytes Reset
• Call Timers
• Last Call
• Phone Reset
• Phone Lifetime
• Prvt/Grp Reset
• Prvt/Grp Lifetime
• Kbytes Reset
• Memo
Settings
• (see next page)
This is the standard main menu layout. Your
phone’s menu may be a little different.
menu map
7
settings menu
Display/Info
• Wallpaper
• [Buy More]
• Internal
• External
• Text Size
• Theme
• Option 1
• Option 2
• Onyx
• High Contrast
• Home Icons
• Backlight
• Timer
• Java Timer
• Sensor
• Logo Flash
• PTT Backlight
• Clock
• Display: On/Off
• Screen Saver
• Time Format
• Date Format
• Year
• Menu View
• Icon View
• List View
• Tab View
• Large Dialing: On/Off
• Language
8
menu map
Phone Calls
• Set Line
• Any Key Ans
• Auto Redial
• Call Waiting
• Auto Ans
• Flip Activation
• Minute Beep
• Call Duration
• TTY
• Hearing Aid
• Notifications
• DTMF Dialing
• Call Forward
Personalize
• Reorder Menu
• Shortcuts
• Up Key
• Down Key
• Left Key
• Right Key
• Center Key
• Left Softkey
• Right Softkey
• Power Up
Volume
• Ringers/Alerts
• Speaker
• Earpiece
• Multimedia
• Keypad
Voice Playback
• Speak Text
• Speak Caller
• Voice
• Multimedia Volume
Memory Card
• Store Media
• Help
Security
• Phone Lock
• Keypad Lock
• SIM PIN
• GPS PIN
• Change Passwords
Advanced
• Alert Timeout
• Headset/Spkr
• Connectivity
• Reset Defaults
• Return to Home
• Transmitters
• Phone Only
Connections
• Bluetooth
• USB
• Memory Card Access
• Data Modem
• Application Access
• GPS NMEA
• Help
Use and Care
Use and Care
To care for your Motorola phone, please keep it away from:
liquids of any kind
Don’t expose your phone to
water, rain, extreme humidity,
sweat, or other moisture.
dust and dirt
Don’t expose your phone to
dust, dirt, sand, food, or other
inappropriate materials.
extreme heat or cold
Avoid temperatures below
-10°C/14°F or
above 45°C/113°F.
cleaning solutions
To clean your phone, use only a
dry soft cloth. Don’t use alcohol
or other cleaning solutions.
microwaves
Don’t try to dry your phone in a
microwave oven.
the ground
Don’t drop your phone.
Use and Care
9
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
information included in the gray-edged pages
at the back of this guide.
about this guide
This guide shows how to locate a menu
feature as follows:
Find it: M > u > Phone Calls
This means that, from the home screen:
1 Press the menu key M to open the
Settings menu.
10
essentials
2 Press the navigation key
to scroll to
Phone Calls, and press the center key r to
select it.
symbols
This means a feature is network or
subscription dependent and may
not be available in all areas, or is not
offered by your service provider.
Contact customer service for more
information.
This means a feature requires an
optional accessory.
SIM card
insert the SIM card
Warning: To avoid loss or damage, do not
remove your SIM card from your phone
unless absolutely necessary.
Turn off your phone and remove your battery
before you install or remove a SIM card.
memory card
Carefully slide the SIM card into your phone,
until it lies flat in the SIM card holder.
Your handset comes with a memory
card, memory card adapter, and memory card
reader1.
A memory card is a removable flash memory
card that you can use to store pictures,
videos, and audio files. The memory card can
be inserted in your phone or connected to
your computer using the memory card reader.
Many types of pictures, videos, and audio
files stored on the memory card can be
1. Depending on your service provider, the memory card,
memory card adapter, and memory card reader may not
be included with your phone. Your handset can be used
with a Transflash or MicroSD memory card.
essentials
11
viewed or played using your phone’s media
center. Music files can be played using the
music player.
2 Slide in the memory card until it clicks into
place.
You can connect your phone using a
Motorola data cable directly to your
computer, access the memory card
loaded in the phone to save or delete music,
images, videos, or audio files.
Find it: M > u > Connections > USB
insert the memory card
1 Slide open the memory card slot cover.
Note: The first time you insert a memory card
in your phone, you will see the following
options: [Do Nothing], Go To Music Player, Go To Camera,
and Go To Media Center. Select the option of your
choice and continue.
Warning: Do not remove the memory card
before selecting the Remove Card option under
Settings. Removing the memory card before
selecting the Remove Card option could result in
loss of data.
12
essentials
battery
Battery or Unable to Charge, take the
following steps:
Battery Use & Battery Safety
• Remove the battery and inspect it to
confirm that it bears a Motorola
“Original Equipment” hologram;
• Motorola recommends you always
use Motorola-branded batteries and
chargers. The warranty does not cover
damage caused by non-Motorola
batteries and/or chargers.
Caution: Use of an unqualified battery
or charger may present a risk of fire,
explosion, leakage, or other hazard.
Improper battery use, or use of a
damaged battery, may result in a fire,
explosion, or other hazard.
• Battery usage by children should be
supervised.
• Important: Motorola mobile devices
are designed to work best with
qualified batteries. If you see a
message on your display such as Invalid
• If there is no hologram, the battery
is not a qualified battery;
• If there is a hologram, replace the
battery and retry charging it;
• If the message remains, contact a
Motorola Authorized Service Center.
• New batteries or batteries stored for a
long time may take more time to
charge.
• Charging precautions: When
charging your battery, keep it near
room temperature. Never expose
batteries to temperatures below 0°C
(32°F) or above 45°C (113°F) when
charging. Always take your mobile
essentials
13
device with you when you leave your
vehicle.
• When storing your battery, keep it in a
cool, dry place.
• It is normal over time for battery life to
decrease, and for the battery to exhibit
shorter runtime between charges or
require more frequent or longer
charging times.
• Avoid damage to battery and mobile
device. Do not disassemble, open,
crush, bend, deform, puncture, shred,
or submerge the battery or mobile
device. Avoid dropping the battery or
mobile device, especially on a hard
surface. If your battery or mobile
device has been subjected to such
damage, take it to a Motorola
Authorized Service Center before
using. Do not attempt to dry it with an
14
essentials
appliance or heat source, such as a hair
dryer or microwave oven.
• Use care when handling a charged
battery: Particularly when placing it
inside a pocket, purse, or other
container with metal objects. Contact
with metal objects (e.g., jewelry, keys,
beaded chains) could complete an
electrical circuit (short circuit), causing
the battery to become very hot, which
could cause damage or injury.
Promptly dispose of used batteries in
accordance with local regulations.
Contact your local recycling center for
proper battery disposal.
Warning: Never dispose of batteries in a fire
because they may explode.
battery installation
1 Slide the release button back until it
releases the battery door.
4 Replace the battery door and press it
gently until you hear a click.
battery charging
2 Remove the battery door.
3 Push the battery down until it snaps in
place.
New batteries are not fully charged.
charge using the charger
1 Pull out the
connector cover,
and insert the
charger into mini
USB connector on
your phone as
shown.
2 Plug the other end of the charger into the
appropriate electrical outlet.
essentials
15
When you charge the battery, the battery
level indicator at the upper right of the screen
shows charging progress. At least one
segment of the indicator must be visible to
ensure full phone functionality while charging.
charge from your computer
You can partially charge your phone’s
battery by connecting a Motorola-approved
USB cable from your phone’s mini-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or buspowered USB hub). Typically, USB highpower connectors are located directly on your
computer.
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the Phone is off when
16
essentials
the USB cable is connected between the
computer and the phone, the phone will
power up in charging mode. This mode allows
the phone to charge fastest and quickest.
Note: If the battery is very low, the phone will
not turn On, but will continue to charge at a
low rate. The phone will power up in charging
mode when the battery has been charged to
approximately 5% of its capacity. For faster
charging under a very low battery condition, it
is recommended to use the rapid charger
supplied with the handset.
If the phone is turned on while charging from
a computer, it will not fully charge the battery.
In this case, the battery charge will be
maintained approximately between 80% and
95% of the battery's capacity. Cables and
software drivers are available in Motorola
Original data kits, sold separately.
TM
Tip: Motorola batteries have circuitry that
protects the battery from damage from
overcharging. Of course, unplugging the
charger from the wall will avoid current drain.
turn it on & off
To turn on your phone,
press and hold O for a
few seconds or until the
display turns on. If
prompted, enter your
four-digit unlock code.
To turn off your phone,
press and hold O for
two seconds.
Note: If you press the O for more than four
seconds, the handset will power “On” in
Transmitters Off mode. To avoid turning on the
phone with transmitters off, ensure the
power key is not held at about 4 seconds after
power-up is initiated, either by pressing the
power key or plugging a cable into the USB
port. To power up the phone normally from
charging mode, wait until the Charger Attached
screen is displayed, and then press the power
key. See “transmitters” on page 79.
enable security
You must enable security the first time you
power on you phone or within 10 days of first
activation of your phone.
1 Press - under Ok.
2 Your are prompted to enable security.
Press - under Yes. A series of screens
followed by the default home page
displays.
3 Press O to return to the home screen.
essentials
17
make a phone call
Enter a phone number and press N to make
a call or use a voice command. See “place a
call using voice name” on page 87.
Tip: For best performance avoid touching the
antenna with your fingers during the call.
To hang up press O or close the flip.
answer a phone call
2 If you want to answer the call using the
handset, just open the flip and press N.
To hang up press O or close the flip.
Note: You must have the Flip Activation
feature On. See “advanced calling” on
page 100.
3 If you are using a Bluetooth headset, you
can press the answer key on your
Bluetooth headtset. To hang up press the
same key on your Bluetooth.
When your phone rings and/or vibrates, you
have the following options:
make a private call
1 If you want to answer the call on speaker
phone, press the speaker key t with
the flip closed. To hang up press the
smart key ..
With Private calls service, you use your phone
as a long-range, digital 2-way radio using oneto-one Private calls or one-to-many group
calls.
Your Private ID is the number at which you
receive one-to-one Private calls.
18
essentials
Talkgroup numbers are numbers through
which you receive one-to-many group calls.
to make a Private call
1 Enter the Private ID you want to call.
2 Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
3 Release the PTT button to listen.
To end the call press O.
Note: A Private call ends automatically if
there is no activity on the call for a few
seconds.
When you send a call alert, the recipient’s
handset displays your name and emits a
series of beeps or vibrations.
The recipient has the following options:
Option
Answer: Begin a Private call with the sender.
Queue: Store the call alert to the call alert
queue.
Clear: Dismiss and delete the call alert.
to send a call alert
1 Enter the Private ID you want to call as
you would when making a Private call.
send call alerts
2 Press - under Alert.
Sending a call alert discretely lets the
recipient know that you want to talk to him or
her on a Private call.
When the message Ready To Alert appears on
the display, press the PTT button until the
message Alert Successful: appears.
essentials
19
answer a private call
1 When your phone emits a chirping sound
or vibrates to indicate you are receiving a
Private call, wait for the caller to finish
speaking.
2 Press and hold the PTT button and begin
talking after your phone emits a chirping
sound.
3 Release the PTT button to listen.
To end the call press O.
receive a call alert
or
2 Queue the call allert by pressing - under
Queue.
or
3 Clear the call alert by pressing - under
Clear.
store a phone number
or private ID
You can store a phone number or private ID in
Contacts:
When you receive a call alert, you must
answer, queue, or clear it. You cannot receive
phone calls or Private calls until you do.
Find it: M > L > [New Contact].
to answer a call alert
1 Press the PTT button to start a Private call
with the sender.
2 Select a specific Ring Tone/Picture.
20
essentials
1 Enter a name for the new entry. Each
entry’s name can contain 20 characters.
3 Select a type for the entry (Mobile, Work1,
Work2, Home, Fax, Pager, IP or Other). To store a
private ID choose Private.
4 Enter the number for the entry and press
- under Save when done.
Tip: Before saving the entry, you can save
more information. You can store an Email
address, IP addresses, and more. You can
choose a special ringer, create Contact
entries that are groups of Private IDs called
Group IDs and/or SDG lists.
After you have saved the number, the new
Contacts entry is displayed.
call a stored phone
number or private ID
Shortcut: From the home screen press under Contcs.
or
Find it: M > L
Tip: You can set up you handset for two
different search options by pressing M >
Search Option. If you select Full Name Search, a
new window will appear to allow you to
type the name of the contact you are
looking for. If you select First Letter Search,
your handset will find the nearest match
to the letter you enter.
2 If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
displayed (Mobile, Private, Work1, Work2, Home,
etc.).
3 If you chose a phone number, press N
to call the entry.
or
If you chose a Private ID, Talkgroup ID, or
SDG List, press and hold the PTT button
to call the number.
1 Scroll to the Contacts entry.
essentials
21
Tip: If the Contacts entry you scrolled to
contains a Private ID, you can make an instant
Private call to that Private ID by pressing and
holding the PTT button, even if the Private ID
is not the type of number displayed.
your phone number and
Private ID
Find it: M > m > My Info.
Tip: Want to see your phone number or
Private ID while you’re on a call? Press M >
My Info.
text messages
If your service provider offers Text
Messaging, your phone sends text messages
using MOSMS and receives text messages
from other phones that are using MOSMS.
22
essentials
set it up
Before you begin using text messaging, you
may need to set up your signature, service
center number, and expiration information.
Shortcut: From the home screen press under Msgs > [Create Message] > M > Setup.
or
Find it: M > E > M > Text Message Setup.
1 Select Signature and enter your signature. It
may be up to 11 characters long.
2 Select Delivery Report and set it to On or Off.
3 Select Srvc Cntr No: and enter the phone
number of your service center. If you do
not know this number, contact your
service provider.
4 Select Expire After. This is the amount of
time messages you send are saved at the
service center if they cannot be delivered.
After this period, they are discarded.
Scroll to select the number of days you
want your messages to be saved.
5 Select Auto Clean Up. Set this option to On if
you want your phone to delete sent
messages.
If you set Auto Clean Up to On, select Clean Up
After to set the number of days after which
sent messages are deleted or the number
of messages to be kept.
6 Select Quick Notes to create a [New Note] or
press - under Edit to change the prewritten quick notes.
Quick notes are short, pre-written text
messages that you can create, edit, and
send in your text messages. You can
store up to 20 quick notes. A quick note
may be up to 30 characters long.
7 Press - under Done to save the
information you entered.
receive a text message
1 To view the message press - under
Read.
2 To dismiss the message notification press
- under Exit.
Note: If your phone is powered off when you
receive a text message, your phone notifies
you the next time you power it on. If you are
out of your coverage area, your phone alerts
you when you return to your coverage area.
Tip: While reading a text and numeric
message that contains a phone number, you
can press S to call that number.
read from the Message center
1 From the home screen press - under
Msgs > Inbox.
2 Select the message you want to read or
press the number of the message you
essentials
23
want to read. If the message fills more
than one screen, scroll to read it.
Tip: Scrolling through one message lets
you view the next message.
3 To reply to the message, press - under
Reply or to see all other choices, including
forwarding and deleting the message,
calling the sender, or storing the sender’s
number in Contacts, press M.
create and send text messages
1 From the home screen press - under
Msgs > [Create Message] > [Create Text Msg].
or
Select Inbox, Outbox, or Drafts.
2 To address the message use the keypad
to enter the phone number of the person
you want to send the message to and
press - under Back or press - under
24
essentials
Contcs, or press M > Recent Calls. Select the
number you want.
3 Select Msg: and enter the text of the
message or to use a quick note press under Browse and scroll to the quick note
you want.
4 Press M > Set Send Method and select Text,
Fax, x400, Paging, Email, ERMES, or Voice.
5 If you want to send the message, press
- under Send or to delete the message
without sending it, press - under Cancel.
Note: If you want to request confirmation
of delivery press M > Delivery Report > On.
use drafts
When you save a message as a draft, it is
saved in the drafts folder.
Shortcut: From the home screen press under Msgs > Drafts.
1 Select the draft you want to edit. You also
have the choice to create new text
messages from this menu.
2 To edit the fields you want to change,
follow step 2 through step 5 in “create
and send text messages” above.
resend text messages
Shortcut: From the home screen press under Msgs > Outbox.
2 Press - under Delete.
3 Press - under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen press under Msgs > Outbox.
1 Press M > Delete All.
2 Press - under Yes to confirm.
manage memory
1 Scroll to the message you want to resend
or press the number of the message you
want to resend.
Your text inbox, outbox, and drafts folder have
a set amount of memory available for storing
messages.
2 Press - under Resend.
The text inbox holds 100 messages. If the
text inbox is full, you cannot receive
messages until you delete some.
delete sent text messages
Shortcut: From the home screen press under Msgs > Outbox.
1 Scroll to the message you want to delete.
The outbox and drafts folder hold 100
messages each. If the outbox and drafts
folder memory is full, you cannot send
essentials
25
To view the amount of memory available in
your text inbox:
use your phone as
USB mass storage
device
Shortcut: From the home screen press under Msgs > M > Setup > Inbox Mem Mtr.
Find it: M > u > Connections > USB > Memory
Card Access
messages or save drafts until you delete
some.
1 Slide open the
connector cover, and
insert the charger into
mini USB connector
on your phone as
shown.
2 Connect the USB cable to the USB port of
the computer.
3 Your memory card can now be accessed
by your computer.
26
essentials
using your handset
as a modem
You can use your handset as a modem
(Packet Data only) with a laptop, handheld
device, or desktop computer. Circuit Data is
not supported. In order to use your handset
as a modem, you must create either a wired
or wireless connection between your handset
and the other device.
To connect your handset wirelessly, you must
have a Bluetooth adapter for the other device.
To create a wired connection, use a USB
cable.
connect with a USB cable
Use a USB cable to connect your
handset to a laptop, handheld device, or
desktop computer.
1 Pull out the connector
cover, and insert the
charger into mini USB
connector on your
phone as shown.
2 Insert the data plug into the data port of
the other device.
connect via Bluetooth
Use your handset as a modem via Bluetooth.
The laptop, handheld device, or desktop
computer you want to connect to must have a
Bluetooth adapter installed.
Check that the adapter is properly installed,
and then follow the specific instructions
outlined in the device’s user guide to connect
the device to your handset.
When used as a modem, your handset is
enabled for Data Modem transfer mode, which is
used for small file transfers such as email.
essentials
27
Note: To use these services, you must install
the iDEN Wireless Data Services software
(available separately). For more information on
setting up your computer and your handset
for Packet Data calls, contact your service
provider.
28
essentials
main attractions
music player
Your handset includes a music player that you
can use to play music files stored in the Music
directory on the memory card inserted in your
phone.
The music player groups the music files into
folders and lists. When you select a music file
to play, the music player plays this file, then
plays the other music files grouped with it.
The music player also plays podcasts you
download to your computer and then save on
the Podcast directory on your phone’s
memory card. You can mark highlights within
a podcast file to help you find the parts you
most want to listen to.
If your service provider offers MMS, you can
send details of the podcast to a friend and
send feedback to the podcast creator using
MMS messages.
Audio files suported by the music player
include:
Format
Bit Rate
AAC
.m4a, .aac
AAC+
.m4a, .aac
Up to
320kbps
Up to
128 kbps
Sampling
Rate
Up to
48 kHz
Up to
48 kHz
MP3
.mp3
(16 to 128
kbps)
Up to
320kbps
Up to
48 kHz
main attractions
29
Format
Bit Rate
WMA v9 L2
WMA v3, v7, v8
.wma
Up to
320 kbps
Sampling
Rate
Up to
48 kHz
play music files
Find it: M > j > Audio Player.
1 Scroll to a folder.
Tip: The Songs folder contains all the
music files on the memory card in a single
list.
2 To play the first music file in the folder,
press - under Play. (If the selected folder
contains subfolders, this plays the first
music file in the first of the subfolders.)
Press r to view the folder’s contents.
Scroll to a music file and press - under
30
main attractions
Play, or scroll to a folder and press under Play to play the first music file in it.
Any time you are viewing a list of folders with
the music player, you can scroll to a folder and
press - under Play to start playing the
contents of that folder or press r to view
the contents of the folder.
To stop viewing a folder and return to the
folder or list that contains it, press - under
Back.
play music while loading files
The first time the music player finds music
files on your memory card, it loads and
organizes these files. This may take a long
time for a large number of files.
To play music while files are loading:
Find it: M > j > Audio Player.
1 Press - under View
2 Scroll through songs and folders while
loading is going on the background.
3 Scroll to a music file or folder and press
- under Play or r.
The following options become available
through the navigation panel:
option
Pause and Resume
Press - under Pause or r to pause, and
press - under Play or rto resume playing
paused music files.
Skip to Next or Previous
Press and release
right or left to skip to
the next or previous music file. (Do not hold
the left side of the navigation key.)
Fast Forward and Rewind
Press and hold
right or left for 2
seconds to fast forward or to rewind.
option
Repeat and Shuffle
Repeat lets you set the music player to play
one or all the music files in a list or folder
repeatedly. While in the music player press
M > Setup > Repeat > All or One.
Shuffle: lets you set the music player to play
the music files in a list or folder in random
order. While in the music player press M >
Setup > Shuffle: > On or Off.
work with playlists
Playlists are lists of music files you create
from the files already available through the
music player.
Playlists enable you to organize music files,
but they do not change anything in other
folders or on the memory card. Adding or
deleting a file on a playlist does not copy,
delete or move it.
main attractions
31
create a playlist
Find it: M > j > Audio Player > Playlists > [Create
New].
1 Enter a playlist name.
Note: If you do not assign a name, the
playlist is named Playlists followed by a
number. For example, the first playlist you
create without naming is automatically
named Playlists-1.
2 Select [Add Songs].
A list of all music files on the memory
card appears.
Tip: For options to help you sort through
this list, press M.
3 Select each file you want on the playlist. A
checkmark appears by each selected file.
Tip: To deselect a selected item, scroll to
a selected file and press r.
32
main attractions
4 When you are finished selecting files,
press - under Done and - under Save.
The following options are available for existing
playlists:
option
Edit a Playlist
You can change a playlist name, add music
files, remove music files, and change the
order of the music files in Music Player >
Playlists > M > Edit Playlist. Make changes and
press - under Save.
Reorder Songs in a Playlist
You can change the order of the music files
while creating or editing the playlist in Music
Player > Playlists > M > Edit Playlist > M >
Reorder Songs. Scroll to the song you want to
move and press - under Grab; then scroll
to the place where you want the song to
appear and press - under Insert.
option
Remove Songs
option
Delete a Playlist
You can remove some or all songs while
creating or editing a playlist.
While in the music player select Playlists.
Scroll to the playlist you want to delete and
press M > Delete Playlist. Press - under Yes
to confirm.
Delete all Playlists
Before you have saved a new playlist or
while editing a playlist, scroll to the song
you want to remove and press M > Remove
Song and press r, or you can select Remove
All Songs; press - under Yes to confirm and
- under Save.
Reorder Playlists
You can change the order of the playlists in
the Playlists folder. Press M > Edit playlist >
Reorder Playlists. Scroll to the playlist you want
to move and press - under Grab; then
scroll to the place where you want the
playlist to appear and press - under Insert.
While in the music player select Playlists.
Press M > Delete All Playlists and press under Yes to confirm.
Note: This deletes all playlists except the
Favorites playlist.
use the favorites playlist
The Favorites playlist is a permanent playlist.
You can Add To Favorites, remove and change the
order of the music files, but you cannot
rename or delete music files.
Find it: M > j > Audio Player > Songs.
main attractions
33
Select the song you want to add to your
favorites and press M > Add To Favorites.
work with podcasts
Find it: M > j > Audio Player > Podcasts.
Note: The Podcasts folder is empty until you
download podcasts from your computer.
1 Scroll to view individual podcast episodes
or folders containing multiple episodes of
the same program.
2 Press r to view the podcast episodes
within a folder or the details screen of an
individual podcast episode.
You can pause, resume, fast-forward, and
rewind just as with any other music file.
Some functions differ when playing a
podcast:
• Pressing r when you have scrolled to
a podcast displays a screen showing
34
main attractions
podcast details, but does not play the
podcast. To play the podcast, press under Play. After you begin playing the
podcast, pressing r pauses and
resumes the podcast.
• If the podcast you are playing contains
highlights, pressing and releasing the
right or left skips to the next or
previous highlight within the podcast,
or to the beginning or end of the
podcast.
highlights
Highlights are portions of a podcast that are
marked to help you find them more easily.
Some podcasts you download may already
have highlights marked. You can use the
music player to add and delete highlight
markers. Press and release (don’t hold) the
right or left to find them.
You can play all the highlights in a podcast and
skip everything that is not marked as a
highlight using Highlights Only.
add a highlight marker
1 While playing a Podcast press M > Add
Highlights.
2 Press - under On to mark the beginning.
3 Go to the point in the podcast that you
want to mark as the end of the highlight
and press - under Off.
4 Press - under Back.
Tip: Highlight markers can be deleted by
pressing M > Clear or pressing M > Edit
Highlights > M > Clear All Highlights from the
Podcasts menu.
send podcast information
If you want to share a podcast you have
saved to your memory card, you can send it in
an MMS message that the person can save
and download onto their computer.
If played on a phone with a music player, like
yours, they will see any highlight markers
created within the podcast.
Find it: M > j> Audio Player > Podcasts > M >
Forward Details > Send.
Note: If the podcast has no highlights, this
option will not be displayed
audio and visual options
You can customize the sound of the music
player by setting the equalizer while music is
playing.
To set the equalizer press M > Setup > Equalizer.
You can also customize the look of the music
player screen by choosing a theme or by
viewing visuals while listening to a music file.
To choose a theme press M > Setup > Themes.
main attractions
35
background music
media center
Your handset has the capability to play music
in the background while you are acessing
other features like Settings, Media Center, Bluetooth,
GPS, Contacts, MMS, Datebook, Memo, Recent Calls, and
others.
The media center lets you access pictures,
videos, and audio recordings stored in your
phone’s memory or in the Audio, Image and
Video folders on a memory card inserted in
your phone’s memory card slot.
You can also enjoy listening to your favorite
background music while browsing the web,
reading news or checking the weather.
play music in the background
Find it: M > j> Audio Player > Songs.
The following audio recordings can be
accessed through the media center:
• Voice records
• Musical ring tones in the list of ring
tones
1 Select a music file and press r to play
the song.
• Audio recordings saved from MMS
messages received
2 Press M > Hide Player.
• Audio recordings downloaded to your
phone
The music player continues playing and the
handset returns to the home screen. To jump
back to the music player, press - under
Player.
36
main attractions
Because the memory card inserted in your
phone may contain files saved to it using a
device other than your phone, not all types of
pictures, videos, and audio recordings on the
memory card may be accessed through your
phone’s media center.
Format
Bit Rate
Sampling
Rate
Items in the media center can be sent in
MMS messages and with Bluetooth. See
“MMS” on page 53 and “bluetooth®” on
page 69.
AAC
(MPEG4
AAC-LC)
Up to 320kbps
16 kHz
Up to 128 kbps
(16 to 128 kbps)
Max: 48 kHz
Pictures in the media center can be sent in
Private calls using Send via PTT. See “PTV
features” on page 43.
Media files supported by the Media Center
include:
Format
Bit Rate
AMR-NB
4.75 kbps – 12.20
kbps (supports all
3GPP specified
rates)
.amr, .3gp,
.3ga, .mp4
AMR-WB
.awb, .3ga,
.3gp
6.6 kbps - 23.85
Kbps (supports all
3GPP specified
rates)
Sampling
Rate
.aac , .3gp,
.m4a, .3ga,
.mp4
AAC+
.aac, m4a,
.3ga, .mp4
Enhanced Up to 128 kbps
(16 to 128 kbps)
AAC+
.aac, .m4a,
.3ga, .mp4
MP3
8 kHz
Up to
48 kHz
.mp3,
.mpga
Up to 320kbps
Up to
48 kHz
main attractions
37
Format
Bit Rate
Sampling
Rate
Format
Bit Rate
Sampling
Rate
8-bit
Linear
PCM
Up to 1536kbps
Up to
48 kHz
WMA v9
L2 (also
WMA v3,
v7, v8)
Up to 320 kbps
48 kHz
Up to 1536 kbps
Up to 48 kHz
(8, 11.05, 12,
16,22,24,3,44,
48 kHz)
.wma
N/A
N/A
XMF MIDI N/A
N/A
.waw, .au
16-bit
Linear
PCM
.waw, .au
8-bit Alaw PCM
Up to 704 kbps
Up to
48 kHz
.waw, .au
8-bit mulaw PCM
Up to 704 kbps
.waw, .au
Up to 44 kHz
(8, 11.05, 12,
16, 22,44 kHz)
Stand
MIDI
.mid, .midi,
.smf
.xmf, .mmf,
.xmf0,
.xmf1,
.mxmf
iMelody
.imy
38
main attractions
1 – 3.5 kHz
Monophonic
N/A
Supported video file formats include:
Format
MPEG4 + AMR-NB
MPEG4 + AMR-WB
MPEG4 + AAC / AAC+ /
Extension
.mp4, .3gp
.mp4, .3gp
.mp4, .3gp
Enhanced AAC+
H.263 + AMR-NB
H.263 + AMR-WB
H.263 + AAC / AAC+ /
.3gp
.3gp
.3gp
Enhanced AAC+
camera
The 1.3 MP camera with a digital, external
viewfinder in your handset takes pictures and
records videos. You can save these pictures
and videos in your phone’s memory or to a
memory card inserted in your phone’s
memory card slot, depending on the storage
preference you chose. You can access these
saved pictures and videos through the media
center.
You can send the pictures you take either in
Private calls or with Bluetooth. You can also
assign them to Contacts entries, or set them
as your phone’s wallpaper.
access the camera
There are many ways to access the camera.
The simplest way is to press e.
To take pictures aim the camera lens on the
flip and press - under Capture or press r.
Note: If you insert a memory card into the
phone now, you are prompted to save the
picture you have just captured to the memory
card. Choosing to save the picture to the
memory card does not change your storage
preferences after the picture is saved.
To save the picture, press r.
main attractions
39
To discard the picture without saving it, press
- under Discard.
From the camera viewfinder, you can press
M to enter Menu Options.
The following options become available:
option
Record Video
Recording a video is similar to taking a
picture. If you store videos in phone
memory, you can record videos up to 60
seconds long. If you record video onto the
memory card, the video length is limited by
how much memory is available on the card
or two (2) hours.
Zoom
Set the zoom to 1x, 2x, or 4x. You can also set
zoom from the viewfinder by pressing
up and down.
40
main attractions
option
Spotlight
Turn on the spothlight On before taking a
picture in low light conditions. You can set it
up to be Always On or Off.
Self Timer
Delay capturing the picture for a selected
number of seconds. The values are: Off
(default), 10 seconds, 15 seconds, 20 seconds.
To turn off the timer before the picture is
captured, press - under Cancel.
Picture Quality
Adjust the picture quality to Normal or Fine.
option
Picture Size
Set up the picture size to Max (1280x1024),
Xlarge (640x480), Large (320x240), Medium (160x120),
Small (128x96), Wallpaper1(176x220), or
Wallpaper2(96x65). You can also set picture size
from the viewfinder by pressing
left and
right.
digital viewfinder
The external digital
viewfinder allows you
to take self-portraits
with convenience and
accuracy compared to a
mirror.
To take self-portraits
press e, close the flip
and press the speaker
phone t key.
When you finish taking pictures, press the
smart . key to exit the self-portrait camera
mode.
photo editor
Your handset comes with a photo editing Java
application that allows you to edit your
pictures with crop, resize, flip and color
adjustment tools. You can also add graphics
and text to your pictures.
Find it: M > j > Media Center.
1 Select the picture you want to edit.
2 Press M > Edit.
or
Find it: M > T > Photo Editor.
change storage preference
You can choose whether media items are
saved to your phone’s memory or to the
main attractions
41
memory card. From the camera viewfinder
press M > Memory Card > Store Media.
1 Select On Phone or Prefer On Card.
customize the camera
The Camera Setup menu lets you customize the
camera as follows:
The location that you choose becomes the
Store Media option in Settings.
option
Ask for Name
access the media center
If this option is On, you are prompted to
enter a name for each picture before
saving. Otherwise, pictures are
automatically saved with the date and a
number as their names.
Shutter Sound
You can access the media center from the
camera at any time, except when you are
using the Camera Setup menu or viewing the
memory screen.
Press M > Media Center.
The media center contains all your pictures,
music and video files located on your phone’s
memory or your removeable memory card.
Use the * or the # to filter your results.
42
main attractions
Set the default sound the camera makes
when is taking a picture.
Spotlight Setting
Select Always On, or Off, depending on the
lighting condition.
option
Default Size
• My Info
Sets the default value for the Picture Size
option.
Default Quality
• Location information1
Sets the default value for the quality of the
picture.
PTV features
With Push To View features, your phone can
send and receive the following items through
Private calls with other phones that have this
capability:
• Short text messages1
• Pictures1
• Datebook events
1. Additional charges may apply.
• Contact information
You can choose to send messages, pictures,
events, My Info, Contacts or Location information to
the Private ID you are engaged in a Private call
with, Private IDs on the Recent Calls list, and
Private IDs stored in Contacts.
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
You can turn your phone’s ability to send and
receive messages, pictures, events or
location information On and Off.
main attractions
43
Note: You cannot send PTT feature items
during Talkgroup calls or SDGC calls.
send messages
The Push to Send Messages feature
lets you send short text messages through
Private calls.
When you send a message, it appears on the
display of the phone you are engaged in the
Private call with.
begin a message and choose a
recipient
You can begin a message during a Private call,
from the Contacts list, the Recent Calls list, or from
the PT Manager.
begin a message during a Private call
While in a Private call, press M > Use PTT
Feature > Send Message.
44
main attractions
Note: The first time you send a message,
Messaging Fees May Apply Continue? appears and you
are prompted to respond. Press - under Yes
to acknowledge the message.
begin a message from the Contacts or
the Recent Calls list
1 From the Contacts or the Recent Calls list,
select the entry containing the Private ID
you want to send the message to.
2 Press M > Use PTT Feature > Send Message.
begin a message from the PT Manager
The PT Manager lets you select the Private ID
you want to send the message to from Contacts
or the Recent Calls list.
Find it: M > p > PT Manager > Send Message.
Then select A Contact or A Recent Call to see a list
of entries from the Contacts or the Recent Calls list
that can receive messages.
create messages
To view the message: Press - under Read.
After you have begun a message and chosen
a recipient, a screen appears that lets you
create the text of the message you want to
send. Your message may be up to 400
characters long.
To dismiss the message press - under
Dismiss.
You can choose from a list of ready-made
words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it
before you send it. Editing a Quick Note
changes the Quick Note for this message only
and will not change the Quick Note on the list.
2 Press - under Reply.
send a completed message
After you have completed your message,
press the PTT button to send it.
receive messages
When you receive a message, a message
notification appears on the display.
reply to a message
1 View the message.
3 Create the message and press the PTT
button to send it.
send pictures
You can send pictures stored in the
Media Center through Private calls. The picture
you send appears on the Private call
recipient’s display.
If the recipient accepts the picture, their
phone saves the picture. The picture then
appears in that phone’s recent call list.
main attractions
45
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply
Continue? appears and you are prompted to
respond.
5 When prompted, press the PTT button to
resume the Private call.
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
from the media center
Find it: M > j > Media Center
send a picture during a call
1 Scroll left or right to Media: Pictures
1 While in a Private call, press - under
Picture or press M > Use PTT Feature > Send
Picture.
2 Select the picture you want to send.
A list of pictures that can be included in a
Private call appears.
2 Select the picture you want to send.
3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
46
main attractions
start a call by sending a picture
3 Press M > Send Via... > Send Via PTT.
4 Select A Contact or A Recent Call
A list of contacts that have Private IDs and
are able to receive pictures appears.
5 Select the name of the person you want
to send the picture to.
6 Press the PTT button to send the picture.
7 When prompted, press the PTT button to
resume the Private call.
from the PT Manager:
Find it: M > p > PT Manager > Send Picture.
1 Select A Contact or A Recent Call
A list of contacts that have Private IDs and
are able to receive pictures appears.
2 Select the name of the person you want
to send the picture to.
3 Select Browse Picture or Capture Picture.
Pictures you receive are saved to your
phone’s memory or a memory card. They are
accessible through the media center.
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
Tip: If you want to stop the transmission
before it is finished, press E.
5 Once picture has been sent, when
prompted press the PTT button to resume
the call.
Note: The first time you accept a stored
picture after turning the phone on, Picture Fees
May Apply Continue? appears and you are
prompted to respond. Press - under Yes to
accept the picture.
receive a picture
clear a picture from the display
4 Press the PTT button to send the picture.
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
If you want to clear a picture from your
phone’s display while still on a call, press M
> Clear Screen.
The picture will not appear on the display
again the next time you receive a call from
main attractions
47
person who sent it. This does not delete the
picture from My Pictures.
send a Datebook event
You can send an event already stored in
your phone’s datebook or create a new
datebook event to send. You can send
datebook events during private calls, from the
Contacts list, Recent Calls list or from the PT
Manager.
to send a datebook event during a
private call
1 While in a Private call press M > Use PTT
Feature > Send Event.
Note: If these options do not appear on
the menu, the Private ID you are engaged
in a private call with is not able to receive
Datebook events.
2 If you want to create a new datebook
event, press - under New and create the
48
main attractions
event in your datebook. If you want to
chose an existing event do so.
3 If the event is a recurring event: Select This
Event Only to send only the event selected.
Select Repeat Events to send all ocurrences
of the event.
4 Push the PTT button to send the event.
send My Info
1 While in a Private Call press M > Send My
Info via PTT, and push the PTT button to
send.
or
2 From the home screen press M > m >
My Info > M > Send My Info via PTT and push
the PTT button to send.
set my info sending option
You can control what portion of the
information in My Info is sent and whether it is
sent automatically in every call or only when
you choose to send it.
Find it: M > p > PT Manager > Configure > PTT
My Info > Info to Send
1 Select or remove the fields you want to
send.
2 Press - under Done.
The information your phone sends always
includes My Name and Private. You may also send
Line 1, Line 2, and Carrier IP, depending on your
sending options.
automatic sending
To control whether you send your information
automatically:
2 When you make a call in which your
information is sent automatically, the
name you entered in the My Name field of
My Info appears on the display of the
recipient’s phone, even if your name and
Private ID are not stored in the recipient’s
Contacts.
send Contact information
1 While in a Private Call press M > Use PTT
Feature.
2 Select Send Contact and select the contact
information you want to send.
3 Push the PTT button to send.
or
Find it: M > p > PT Manager > Configure > PTT
My Info > Auto Send
1 From the home screen press M > p >
PT Manager > Send Contact.
1 Select On or Off
2 Enter the Private ID number of the person
you want to send the Contact information
to or press - under Browse.
main attractions
49
3 Select from Recent Calls, Contacts, or Memo.
4 Select the contact information you want
to send and push the PTT button.
send your location
You can transfer your approximate
location information through Private calls to
other enabled phones. Using the integrated
GPS feature the following location information
can be shared:
3 Press the PTT button to send your
location.
Note: The location information can be stored
in the recipient’s recent call list.
turn PTT features on and off
• Time Stamped Latitude/Longitude
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events on and off.
• Relative Location or Direction and
distance from the sender in Miles or
Kilometers
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
Find it: M > p > PT Manager > Send Location.
1 Select A Contact or A Recent Call.
A list of contacts that have Private IDs and
are able to receive pictures appears.
50
2 Select the name of the person you want
to send your location to.
main attractions
Find it: M > p > PTT Options > On/Off PTT
Features.
4 Check or uncheck Messages, Pictures
Events and/or Location.
one touch PTT
Find it: M > p > PTT Options > One Touch PTT.
One Touch PTT sets your phone to do any of
the following each time you press the PTT
button from the home screen:
option
Off
Nothing happens when you press the PTT
button from the home screen.
Quick PTT
Go to Quick PTT. See “quick PTT” on
page 52.
Last Call
Call the most recent Private ID or Group on
the recent calls list.
option
Assigned Number
Call a Private ID you assign. Enter the
number using your keypad, or press under Search. Select Contacts, Recent Calls, or
Memo.
If you are entering a Talkgroup number,
press # before the number.
PT Manager
Go to PT Manager. See “PT manager” on
page 53.
Send Event
Go to the first screen to send a Datebook
Event.
Send Message
Go to the first screen to send a message.
See “send messages” on page 44.
main attractions
51
option
Send Picture
To view a list of Contacts and SDG lists with
Private IDs in Contacts:
Find it: M > p > Quick PTT
Go to the first screen to send pictures. See
“send pictures” on page 45.
Send My Info
To move between Contacts, Recent Calls, or Memo,
use the
left or right, or press * or #.
Go to the first screen to send My Info. See
“send My Info” on page 48.
Send Contact
1 Select the entries you want.
Go to the first screen to send a contact. See
“send Contact information” on page 49.
Send Location
Go to the first screen to send your location.
See “send your location” on page 50.
quick PTT
Quick PTT lets you quickly make a call,
create an SDG list or make a SDG call when
access any Private IDs on your phone.
52
main attractions
To make a Private call or SDG call:
2 Press - under Done.
3 Push the PTT button.
To save your selections as a SDG list press
M > Save SDG. For more information about
SDG lists, see “selective dynamic group
(SDG) calls” on page 90.
If you want to assign a name to the SDG list,
enter the name.
Note: If you do not assign a name, the SDG
list is named SDG followed by the number of
members in the SDG list. For example, SDG
(8) for a SDG list with 8 members.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu.
You can also access the Quick PTT feature
and set the One Touch PTT feature.
Find it: M > p > PT Manager
1 Select Quick PTT to quickly find a contact
that has a Private ID.
or
2 Select Send Message, Send Picture, Send Event, Send
My Info, Send Contact or Send Location. After
choosing what PTT item you are sending,
select a contact and press the PTT button
to send.
or
3 Select Configure to configure your PTT Quick
Notes, PTT My Info, PTT Location, One Touch PTT, or
On/Off PTT Features.
MMS
Multimedia Messaging Service (MMS) lets
you send and receive messages that may
include text, pictures, videos, and audio
recordings.
Depending on your service provider, your
phone may support MOSMS as well as MMS.
You should see no significant differences
between the two; some names of menu
items and the steps you take to access
features may differ.
create a message
To begin creating a message press M >
Messages > [Create Message] or - under Create.
main attractions
53
Note: You can also create a message from
Contacts, Recent Calls, or the home screen.
To address the message:
1 Select To:
2 Add the phone number or email address.
or
3 Select from Contacts or Recent Calls.
4 Press r.
Tip: To remove a phone number or email
address from the list of message recipients,
scroll to the phone number or email address
and press - under Remove.
When you are finished addressing the
message, press - under Back.
To enter or edit the body of the message:
1 Select Message.
2 Enter text or use a Quick Note and press r.
54
main attractions
3 Press Send.
more message options
To view more message fields in a message
you are creating, select ...More...
The following options become available:
option
Subject
Create or edit the subject line.
Attach
Attach a picture, audio file, video or voice
record.
Cc
Send a copy of this message to someone
else.
option
Auto Replies
Allows you to create a list of possible short
answers for the recipient to choose when
replying to your message.
Priority
Set priority Normal or High.
Report
Set receipt confirmation On Delivery.
Valid Until
Set a date after which attempts to deliver
the message end. Or press - under No
Date.
reply to a message
You can reply to a message while you are
viewing it, or while a previously viewed
message is highlighted in the message
center. You cannot reply to unread messages.
To reply to a message:
1 View the message you want to reply to.
2 To reply to the sender only, press Reply or
Reply All.
3 A list of short phrases appears. Select any
of these phrases to add it to your
messages or select [Create Reply].
4 Edit any message fields you want to
change.
5 Send the message.
quick notes
When you are filling in the Message and Subject
message fields, you can add ready-made
words or short phrases called Quick Notes. After
you add these words or phrases, you can edit
them as you would any other text.
main attractions
55
1 While you are creating a message, scroll
to or select Message or Subject.
A list of available pictures, videos, and audio
recordings appears.
2 Press QNotes or M > Insert QuickNotes.
Select the picture, video, or audio recording
you want to insert.
3 Select the Quick Note you want to insert
into the message.
insert a picture, video, and
audio recording from the media
center
You can insert one or more pictures, videos,
and audio recordings from the media center
into the body of the message. You can
include text in the body of your message in
addition to these items.
insert items
While you are filling in the Message field, press
M > Insert Picture, Insert Video, Insert Audio, Capture
Video, Capture Picture or Record Voice.
Tip: To view or listen to the item before
inserting it, highlight it and press Preview.
remove an inserted item
To remove an item from the message you are
creating:
1 Highlight the item.
2 Press - under Delete.
attach a picture, video, and
audio recording from the media
center
You can attach one or more pictures, videos,
and audio recordings from the media center.
1 Select Attach > [New Attachment].
56
main attractions
2 Select Browse Pictures, Capture Picture, Browse
Audio, Record Voice, Browse Video, or Record Video.
A list of available pictures, videos, and
audio recordings appears.
3 Select the picture, video, or audio
recording you want to attach.
Tip: To view or listen to the item before
attaching it, highlight it and press Preview.
If you want to attach more items, select
[New Attachment].
4 When you are finished, press Done.
take a new picture
1 While you are creating a message, scroll
to any message field and press M or
select Attach > [New Attachment].
2 Select Capture Picture. This accesses the
camera.
Tip: If you want to adjust the zoom,
spotlight, picture quality, picture size, or a
timer, set these options before taking the
picture.
3 Take the picture.
4 When you have captured the picture you
want, press Save. This will automatically
save it to your media and attaches it to
your message.
To discard the picture, press Discard. You
can then take another picture.
5 When you are finished, press Done.
The picture is attached to the message
and saved to the default storage location.
record a video
You can record a video to send with a
message:
1 Select Attach > [New Attachment].
main attractions
57
2 Record and adjust video.
5 When you are finished, press Done.
3 To save the video, press e or press r.
The voice record is attached to the message
and saved to the media center and the list of
voice records.
To view the video without saving it, press
Review.
To discard the video without saving it, press
Discard.
The picture is attached to the message and
saved to the default storage location.
create a new voice record
You can create a new voice record to send
with a message:
1 Press M or select Attach > [New Attachment].
2 Select Record Voice.
remove an attachment
To remove an attachment in a message you
are creating:
1 Select Attach.
2 Scroll to the attachment you want to
remove.
3 Press M > Unattach.
drafts
3 Say the message you want to record into
the microphone.
While you are creating a message, you can
save it in the MMS drafts folder before you
send it.
4 When you are finished recording, press
Save.
You can view, edit, send, or delete saved
drafts.
58
main attractions
save a message in the MMS
drafts folder
While composing a message you can press
M > Save In Drafts.
You can continue to create the message. The
version you saved in the MMS drafts folder
will not change.
send a draft
Shortcut: From the home screen press under Msgs > Drafts.
1 Select the draft you want to send.
2 Press M > Send.
edit a draft
Shortcut: From the home screen press under Msgs > Drafts.
1 Select the draft you want to edit.
2 Press r.
delete a draft
When you send a draft, it is removed from the
MMS drafts folder.
To delete a message in the MMS drafts folder
without sending it, scroll to the message you
want to delete and select Delete > Yes.
MMS sent items
MMS messages you have sent or tried to
send are stored in the MSS Outbox.
forward items from the sent
items
Shortcut: From the home screen press under Msgs > Sent Items.
1 Scroll to the message you want to
forward.
main attractions
59
2 Press M > Forward.
1 Scroll to the message you want to view.
3 Edit and press - under Send.
2 Press M > Delivery Status.
resend
delete a message
If a message was not sent from your handset,
you can resend it.
1 Scroll to the message you want to delete.
Shortcut: From the home screen press under Msgs > Sent Items.
3 Press - under Yes to confirm.
2 Press M > Delete Message.
1 Scroll to the message you want to resend.
receive a message
2 Press - under Resend.
When you receive an MMS message, a
message notification appears on the display.
Note: If your message was sent successfully,
Resend will not appear as an option.
check delivery status
If a message was successfully sent and you
set the message to give a report confirming
delivery, you can check the delivery status:
Shortcut: From the home screen press under Msgs > Sent Items.
60
main attractions
1 To view the message press r.
If your phone is set to download new
messages automatically, the message
downloads from the message server
now.
2 If your phone is set prompt you before
downloading new messages, press M.
3 If the message fills more than one screen,
scroll to read it.
embedded objects and
attachments
Messages may contain pictures, videos, or
audio recordings as part of the body of the
message or as attachments.
If a message contains pictures, videos, or
audio recordings in the body of the message,
highlight each picture, video, or audio
recording to view or play it.
If a message contains a picture, video, or
audio recording as an attachment, open the
attachment to view the picture or play the
video or audio recording.
open attachments
To open an attachment:
2 Highlight the attachment you want to
open. Attachments appear at the end of a
message.
3 Press r.
Note: Attachments that are of an unknown
type cannot be opened, but they can be
deleted.
view received messages from
the message center
Shortcut: From the home screen press under Msgs > Inbox.
Select the message. If the message has not
yet been downloaded from the message
server, it is downloaded now.
delete unread messages
1 Scroll to the message you want to delete.
1 View the message.
main attractions
61
2 Press - under Delete and - under Yes to
confirm.
forward a message
From field, the To field, the Cc field, the
subject line, or the body of the message, you
can call or send a call alert to that number.
1 Press M > Forward.
send a call alert
2 Create and send your message.
Embedded objects and attachments are
included when you forward a message.
2 Highlight the Private ID or Talkgroup ID
you want to alert.
lock and unlock messages
Locked messages cannot be deleted until you
unlock them.
1 View the message you want to lock or
unlock.
2 Press M > Lock Message or Unlock Message.
call a number in a message
If a message you receive contains a phone
number, Private ID, or Talkgroup ID in the
62
main attractions
1 View the message.
3 Press M > Alert.
4 Push the PTT button.
make a group call
1 View the message.
2 Press M.
3 Highlight the Talkgroup ID you want to
call.
4 Select Talkgroup.
5 Push the PTT button.
store message information to
contacts
Contacts type you want to assign the
number or email address.
If a message you receive contains a phone
number, Private ID, Talkgroup ID, or an email
address in the From field, the To field, the Cc
field, the subject line, or the body of the
message, you can store this information to
Contacts.
6 Press - under Save.
1 View the message.
2 Highlight the website URL you want to go
to.
2 Highlight the number or email address
you want to save.
3 Press M > Save Number or Save Email.
4 To store the number or email address as a
new entry, select [New Contact].
go to a website
If a message contains one or more website
URLs, you can go to that website.
1 View the message.
3 Press M > Go To Website.
Note: The entire URL must appear in the
message to allow you to open the
website.
To store the number or email address to
an existing entry, select the entry.
5 With the Contacts type field highlighted,
press
left or right to display the
main attractions
63
save an embedded picture,
video, or audio recording
To save a picture, video, or audio recording
that is part of the body of a message you
receive:
1 View the message.
2 Highlight the picture, video, or audio
recording you want to save.
3 Press M.
4 Select Save Picture, Save Video, or Save Audio.
The item will save in the default storage
location.
Note: Some types of pictures, videos,
and audio recordings can be viewed or
played, but not saved.
delete an embedded picture,
video, slide show, or audio
recording
To delete a picture, video, or audio recording
that is part of the body of a message you
receive:
1 View the message.
2 Highlight the picture, video, or audio
recording you want to delete and press
M.
3 Select Delete Picture, Delete Video, or Delete Audio.
Note: You may save or delete pictures
and audio recordings from slide shows
individually as you view or listen to them.
save attachments
1 View the message.
2 Highlight the attachment you want to
save.
64
main attractions
3 Press M > Save Attachment.
Selected items save to the default
storage location.
Note: Some types of pictures, videos,
and audio recordings can be viewed or
played, but not saved.
delete attachments
save audio
1 View the slide show.
2 Press M > Save Audio.
If the slide show contains more than one
audio recording, a list of the audio
recordings appears. Select the audio
recording you want to save.
1 View the message.
message transmission
2 Highlight the attachment you want to
delete.
After you start to send a message you have
created or start to download a message you
have been sent, you can still stop the
message transmission from being completed:
3 Press M > Delete Attachment.
4 Press - under Yes to confirm.
save a picture
1 View the slide show.
2 When the picture you want to save
appears, press M > Save Picture.
With the flip is closed, press the smart key on
the top .. Opening or closing the flip does
not interrupt message transmission.
customize MMS
Find it: M > g > M > MMS Setup.
main attractions
65
This option is available from many contextsensitive menus when you are using MMS.
The MMS Setup menu lets you customize
MMS for your handset with the following
options:
option
Friendly Name: Enter text here to create a
friendly name. Your friendly name is the
name displayed in the From: field on other
iDEN handsets when they receive
messages from you.
Signature: Enter text here to create a
signature. Your signature is text that is
automatically inserted at the end of all
messages you create. You can edit the text
before sending the message.
Quick Notes: Lets you create new Quick Notes
and edit or delete Quick Notes you have
created.
66
main attractions
option
Replies: Lets you create new reply phrases
and edit or delete reply phrases you have
created.
Download Options: Controls whether your phone
automatically downloads new messages
when they arrive, or only after you respond
to a prompt or read the message from the
Inbox. Set this option to Automatic if you want
your phone to download new messages
automatically; set the option to Manual if you
want your phone to prompt you before
downloading new messages.
Cleanup: Controls how long messages remain
in the Inbox and Outbox before they are
deleted.
new quick notes and reply
phrases
Note: These Quick Notes are not the same as
the quick notes used with MOSMS
messages. Each messaging service has its
own quick notes feature.
create quick notes
1 From the MMS Setup menu, select Quick
Notes or Replies.
2 Select [New QuickNote] or [New Reply].
3 Enter text from the keypad and press r.
edit quick notes
You can edit only Quick Notes and reply
phrases you have created.
1 From the MMS Setup menu, select Quick
Notes or Replies.
3 Edit the text and press r.
delete only Quick Notes and reply
phrases you have created
1 From the MMS Setup menu, select Quick
Notes or Replies.
2 Scroll to the Quick Note or reply phrase
you want to delete.
3 Press - under Delete.
4 Press - under Yes to confirm.
delete all Quick Notes or all reply
phrases you have created
1 From the MMS Setup menu, select Quick
Notes or Replies.
2 Press M > Delete All.
3 Press - under Yes to confirm.
2 Select the Quick Note or reply phrase you
want to edit.
main attractions
67
clean up options
The clean up option controls how long
messages remain in the Inbox and Sent Items
before they are deleted. You set the clean-up
option for the Inbox and Sent Items
separately.
The clean up option deletes only read,
unlocked messages.
Find it: M > g > M > MMS Setup > Cleanup.
1 Select Inbox or Sent Items.
2 Choose a clean up option from the
following list:
option
Off: Messages are never automatically
deleted.
5 Messages: If you have more than 5
messages, messages are deleted in the
order they were received, starting with the
oldest, until 5 are left.
68
main attractions
option
10 Messages: If you have more than 10
messages, messages are deleted in the
order they were received, starting with the
oldest, until 10 are left.
With these options, messages are deleted
in the order they were received, starting
with the oldest, until the selected number
are left.
1 Day: Messages are deleted if they are older
than 1 day.
3 Days: Messages are deleted if they are
older than 3 days.
With these options, messages are deleted
when you exit the message center after
setting the option.
Custom: Lets you create a clean-up option of
up to 99 messages or 99 days. for the inbox
3 Press - under Yes to automatically delete
messages now or press - under No to
delete messages later.
delete all messages
To delete all read, unlocked messages from
the Inbox, all messages in the Drafts folder, or
all successfully sent messages in the Sent
Items folder:
Find it: M > g.
1 Select Inbox, Drafts, or Sent Items.
2 Press M > Delete All.
3 Press - under Yes to confirm.
bluetooth®
Your handset supports the use of wireless
Bluetooth stereo headsets. The audio from
the music player is routed to the stereo
headset. Additionally the handset can be used
to stream stereo audio to a home
entertainment system.
All stereo audio includes ring tones, music
and Java sound.
Find it: M > m > Bluetooth.
The Bluetooth connection menu contains an
option to search for Audio Devices including
stereo Bluetooth devices.
turn Bluetooth On or Off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
Find it: M > m > Bluetooth > Setup > Power.
main attractions
69
1 Select On to power Bluetooth On.
2 Select Name if you wish to assign a name
to your handset.
3 Select Find Me Duration to determine the
amount of time in which your handset can
be found by other Bluetooth devices.
Tip: You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
make a Bluetooth connection
connect your handset with a Bluetooth
headset
Find it: M > m > Bluetooth > Audio Devices >
[Look for Devices].
1 Follow the instructions on your Bluetooth
headset to set it up to be found.
2 Once your Bluetooth headset is set to be
found press r on your handset. Your
70
main attractions
phone will scan the Bluetooth headset
until it finds it. Press r when you see
the name of the Bluetooth headset on
your screen.
3 Your handset requires that you create a
bond in order to connect with a Bluetooth
headset. Press - under Yes when you
are prompted to bond with the headset.
4 Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
Bluetooth device’s user guide to locate
this information.
If a device ships without a Bluetooth PIN,
then you can enter any PIN for that
device. To establish a connection to that
device, enter the same PIN for both your
phone and the device. For example, if you
enter 1234 as the device’s PIN, then enter
1234 as your phone’s PIN.
5 Press - under Ok.
Note: This handset offers bluetooth auto pair
feature with auto pair compatible Motorola
devices. When bonded via bluetooth with a
certain device, the pin will not be required
connect your handset with another
Bluetooth device
Find it: M > m > Bluetooth > Pair To Devices.
1 Select the device you want from the list of
found devices on your screen.
2 Create a bond if you are prompted to do
so.
Tip: If you have previously connected to a
device, the device will be stored on your
phone so you can connect with it easily.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
Note: If the Audio Devices list contains only one
device, then your phone will automatically try
to connect to that device.
1 While in a call, press M > Use Bluetooth.
2 Press - under Yes to power On
Bluetooth.
3 Select the audio device you want to
connect to from the list of Handsfree Devices.
send information via Bluetooth
You can use your handset to send Contacts
entries, Datebook events, or audio files,
pictures, and videos in the media center to
another Bluetooth device.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect
with yours.
Note: Files sent or received may be up
to 6 MB, depending on your service
provider.
main attractions
71
send Contacts
Shortcut: From the home screen press under Contcs.
1 Select the contact you want to send.
2 Press M > Send Via... > Bluetooth.
3 Press - under Yes to power On
Bluetooth.
4 Select the device you want to transfer the
contact information to.
or
Search for the device by selecting [Look for
Devices].
5 If prompted, bond with the device.
Your phone connects with the devices
and transfers the contact.
send a Datebook event
Find it: M > m > Datebook
72
main attractions
1 Select the datebook event you want to
send.
2 Press M > Send Via... > Bluetooth.
If the event you select repeats, then you
will be prompted to choose whether to
send the selected instance of the event or
all instances of the event.
To send only the selected instance of the
event, select This Event Only.
or
To send all instances of the event, select
Repeat Events.
3 Press - under Yes to power On
Bluetooth.
4 Select the device you want to transfer the
contact information to.
or
Search for the device by selecting [Look for
Devices].
5 If prompted, bond with the device.
Your phone connects with the device and
sends the datebook event.
send audio files, pictures, and videos
Note: Note: You can only send audio files,
pictures, and videos if they are not forward
locked and if their DRM settings do not
prevent you from sending.
Search for the device by selecting [Look for
Devices].
4 If prompted, bond with the device.
Your phone connects with the device and
sends the datebook event.
clock screen saver
Find it: M > j > Media Center
Your handset comes with a clock screen
saver that shows the time and day of the
month through the external display when this
one is in power save mode.
1 Select the audio file, picture, or video you
want to send.
When a key is pressed the screen saver is
removed and the display lights up.
2 Press M > Send Via... > Bluetooth.
Find it: M > u > Display/Info > Clock > Screen
Saver.
3 Select the device you want to transfer the
contact information to.
or
main attractions
73
You can choose from five different clock
styles:
External Clock 1
External Clock 3
External Clock 2
12
2:11pm
3
9
21
21
6
External Clock 4
External Clock 5
12
21
3
9
21
6
74
main attractions
basics
See page 1 for a basic phone diagram.
status indicators
display
Status indicators are shown at the top of the
home screen:
The home screen shows when you turn on
the phone. To dial a number from the home
screen, press number keys and N.
1. 2. 3. 4.
5. 6. 7.
READY
4/25/07
Note: Your home screen may look different.
04
05 pm
Date
READY
4/25/07
Contcs
04
Time
05 pm
Left Soft
Key Label
Right Soft
Key Label
Msgs
1 Signal Strength Indicator: Vertical bars
show the strength of the network
connection. You can’t make or receive
calls when 1 or 0 shows.
Soft key labels show the current soft key
functions. For soft key locations, see page 1.
basics
75
2 Active Phone Line: 1 indicates phone line
1 is ready to make calls; 2 indicates phone
line 2 is ready to make calls.
3 Speaker On/Off : Sounds associated
with Private calls and group calls can be
set to come through the earpiece rather
than through the speaker.
main menu
All your phone’s features can be accessed
through the main menu. You can set the main
menu to appear as List View, Icon View, or as Tab
View.
Find it: M > u > Display/Info > Menu View.
4 Ringer Vibe/Off: Your phone is set to not
ring.
text entry
5 Message Indicator: Shows when
you receive a text message.
Some features let you enter text.
6 Packet Data: Your handset is ready to
transfer packet data or is transferring
packet data when it shows a blinking
arrow.
7 Battery Charge Indicator: A fuller battery
indicates a greater charge. Recharge the
battery when your phone shows Low
Battery.
76
basics
Your phone provides convenient ways to
enter words, letters, punctuation, and
numbers whenever you are prompted to
enter text (for example, when adding a
Contacts entry or when using Text
Messaging).
change the character input mode
1 When you see a screen where you can
enter text, press M to change the
character input mode.
word method
2 Select one of the following options:
Word English Text Input method analyzes the
letters you enter using an intuitive word
database and creates a suitable word. (The
word may change as you type.)
entry method
Alpha
Press a key several times for
different characters.
Word
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
Symbols
Enter symbols.
Numeric
Enter numbers by pressing the
numbers on the keypad.
Tip: When entering text, press * to change
letter capitalization (Abc > ABC > abc).
Word English Text Input method lets you
enter text into your phone by pressing keys
just once per letter.
enter a word using “word” method
character input
1 Select the Word character input method.
2 Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Bill, press 2 4 5 5).
(If you make a mistake, press * to erase
a single character. Press and hold * to
delete an entire entry.)
3 To accept a word and insert a space,
press #.
basics
77
To accept a word completion (such as
Billion when you entered Bill), press
right.
alpha method
To enter characters by tapping the keypad:
1 Select the Alpha method.
2 Press the corresponding keys repeatedly
until the desired letter appears. (For
example, to enter the word Bill, press 2
twice, 4 three times, 5 three times,
and 5 three times again. If you make a
mistake, press Delete to erase a single
character. Press and hold Delete to erase an
entire word.)
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
space after two seconds or when you enter a
character on a different key.
78
basics
Characters scroll in the following order:
characters
1
.?!,@&:;“-()‘¿ ¡%£ ¥
2
ABC2ÁÃÂÀÇ
3
DEF3ÉÊÈ
4
GHI4ÍÌ
5
JKL5
6
MNñO6ÓÕÔÒ
7
PQRS7ß
8
TUV8ÚÜÛÙ
9
WXYZ9
0
+-0*/\[]=><#§
#
Space
*
Back
navigation key
Press the navigation key
up, down, left, or right
to scroll to items in the
display. When you scroll
to highlight the desired
item, press r.
handsfree speaker
You can use your phone’s handsfree speaker
to make calls without holding the phone to
your ear.
During a call (with the flip open), press under Speaker to turn the handsfree speaker
On.
Note: The handsfree speaker won’t work
when your phone is connected to a handsfree
car kit or headset.
transmitters
Note: Consult airline staff about the use of
the Transmitters feature during flight. Turn off
your phone whenever instructed to do so by
airline staff.
Transmitters turns off your phone’s calling
features in situations where wireless phone
use is prohibited, but you can use the phone’s
other non-calling features when Transmitters
is turned Off.
Find it: M > u > Advanced > Transmitters > Off.
The handsfree speaker stays on until you
press - under Speaker or close the flip.
basics
79
use GPS with map
software
Your phone is enabled with a highly-capable
GPS receiver that sends location information
to a USB port on a PC, laptop, or PDA.
Note: No serial port connectivity is provided
by your phone. Applications on the host
device which are expecting to receive the
GPS location information via a serial port must
instead use a Virtual Serial Comm Port.
The data sent to the host device is formatted
as prescribed in the National Marine
Electronics Association 0183 V3.0 (NMEA0183) standard. As such it supports the
following sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
This handset is not a full NMEA-0183
compliant device supporting electrical RS422/RS-232 connectivity as dictated by the
80
basics
NMEA-0183 standard. Consequently it's
unsuitable for conventional marine NMEA0183 equipment use. Its intended use is for
normal "terrestrial" mobile users who want to
enable their USB hosting computing devices
such as a PC, laptop or PDA with the phone's
highly-capable GPS functionality.
get connected
1 Slide open the phone's bottom
connector and insert a mini-USB cable
into the phone's bottom connector.
2 Insert the other end of the mini-USB cable
into a vacant USB receptacle of your host
device. A virtual USB Comm Port will be
created on your host device upon
successful enumeration of the phone as a
USB Communications Device Class
device.
3 Ensure no application in your host device
is using the created COMM port. You
may need to ensure that the created
virtual COMM port settings are set as
follows:
Your phone is now actively sending location
NMEA-0183 formatted GPS data to your USB
host device.
• Bits per second: 4800
To stop your phone from sending location
data:
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None.
4 Start the GPS application on your host
device. Set the GPS application to start
accepting NMEA-0183 formatted data
from the created Virtual COMM port.
5 Set your phone to start sending NMEA0183 formatted location information.
Find it: M > m > GPS > Interface > NMEA OUT >
USB.
Find it: M > m > GPS > Interface > NMEA OUT >
Off.
Note: Each time you power your phone Off,
NMEA OUT is automatically set to Off and
you need to manually restart it using the
menu selections above.
Your USB host device will generally provide
charging power (5V, up to 500mA) to your
phone via the mini-USB cable therefore no
other charging power to it will normally be
required. However some laptops may require
that you provide external AC/DC power to the
laptop in order for it to provide full 500mA
charging current capability to the phone.
basics
81
features for the hearing
impaired
may need to adjust your hearing aid (HA)
volume setting.
using your phone with a
hearing aid
For best results use the following
optimization procedures and handset setting.
They generally apply as well for users with
cochlear implants:
optimize your handset position and
orientation
While in a phone call slide your phone up and
down, then left and right until best
microphone coupling is obtained. You also
82
basics
If your HA has a telecoil, activate its switch,
then also rotate the handset as illustrated to
align the telecoils.
Note: Some automatically switched hearing
aids may need an auxiliary switching magnet.
If you are unsure whether your HA is telecoil
equipped or needs an auxiliary magnet,
please refer to your HA user guide or contact
a hearing aid professional or supplier.
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
Approximate telecoil location is just
above the battery.
optimize your handset antenna
position
Your phone’s rating for HA compatibility is
determined with the antenna extended if it
has an extendable antenna. However,
acceptable use might occur with the antenna
retracted. Test your handset in both antenna
positions when the handset is in the optimum
orientation.
choose your hearing aid setting
Find it: M > Settings > Phone Calls > Hearing Aid.
1 Set this option to Microphone. Microphone
coupling is now optimized.
or
2 Set this option to Telecoil. Handset meets
US federal requirements for telecoil
coupling sound.
or
3 Set this option to Off (factory default). This
is the setting for non HA users.
features for the vision
impaired
voice playback
The Voice Playback feature allows you to use
a simulated voice to guide you through phone
basics
83
menus and through placing and receiving
phone calls.
You can hear the following as you use your
phone:
• The number keys you have pressed
• The names, numbers, and contact
types of each contact entry as you
scroll through Contacts
• The status information on the Home
screen, such as signal strength, battery
level, date and time, and service status
Note: When you access the idle
screen, you will hear “Home”
• Main menu options as you scroll
through the main menu
• A prompt indicating that your phone is
placing a call
• The name of incoming callers rather
than a ring tone
84
basics
Find it: M > u > Voice Playback.
1 Select Speak Text > On for the navigation
playback.
2 Select Speak Caller > On to hear the name or
phone number of incoming callers
3 Select Voice to choose either a female
voice (Barbara) or male voice (Simon).
4 Select Multimedia Volume and press the
volume keys up or down to adjust the
volume of voice playback.
high contrast theme
Your handset comes with a standard high
contrast theme that provides black and white
text with reverse text highlighting and very
large icons for easy visualization of selection.
Find it: M > u > Display/Info > Theme > High
Contrast.
calls
To make and answer calls, see page 18.
turn off a call alert
You can press the volume keys to turn off a
call alert before answering the call.
recent calls
The recent calls list contains information
associated with calls you have made and
received and call alerts you have received.
When you send or receive Private calls, the
recent call list contains the following PTV
items with those calls:
• contact information received
• My Info received
• short text messages received
• pictures sent or received
• Datebook events received
• Location information received
The recent calls list displays up to 20 of the
most recent calls and call alerts.
1 Press M > Recent Calls.
2 Scroll through the list.
store an item to contacts from
recent calls
Phone calls, Private calls, My Info, Contacts or
Location entries received from other phones
can be stored to the Contacts list from the
Recent Calls list.
calls
85
Find it: M > Recent Calls.
1 Scroll to or select the item you want to
store.
2 Press - under Save to store the
information as a new entry in the
Contacts list.
or
3 If Save is not one or you options, press M
> Update Contacts. And select the contact you
want to update.
4 Press - under Save to save your
changes.
redial
To redial your last outgoing call, press and
hold N or push the PTT button if it was a
private call.
86
calls
caller ID
Caller ID allows people to identify a caller
before answering the phone by displaying the
number of the incoming call. If you do not
want your number displayed when you make
a call, just follow these easy steps.
To block your phone number from being
displayed for a specific outgoing call:
1 Press * 6 7.
2 Enter the number you want to call.
3 Press N.
To permanently block your number, call your
customer service provider.
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
Find it: M > u > Phone Calls > Call Forward.
1 To forward all calls select All Calls and
select To to enter the phone number you
want all your calls forwarded to.
or
2 You can specify a forwarding number for
each type of missed call by selecting
Detailed and chosing the following options:
If Busy: When your handset is on a call or
transferring data.
If No Answer: When you do not answer on
the first 4 rings.
If Unreachable: When your handset is out of
coverage or powered off.
voice names
You can place calls by speaking comands to
your phone if you have previously assigned a
voice name to your contacts.
assign voice names to contacs
1 Press - under Contcs and select [New
Contact].
2 Assing a name, phone number and select
[Options].
3 Select Voice Name and follow the propmt to
record the voice name.
4 Press - under Back and - under Save.
place a call using voice name
1 With the flip closed or open, press the
speaker key t until you are prompted to
say the voice name.
The handset will automatically place the call.
calls
87
emergency calls
Your service provider programs one or more
emergency phone numbers that you can call
under any circumstances, even when your
phone is locked or the SIM card is not
inserted.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
When you make an emergency call, your
phone’s GPS Enabled feature can help
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your best knowledge
of your location to the emergency response
center when you make an emergency call.
Note: Emergency calls cannot be placed
while the keypad is locked.
Your phone supports emergency calling.
Emergency phone calls can be made even
when your SIM card is blocked or not in your
phone.
Note: If you have not registered on the
network, emergency calls cannot be placed
while your SIM card is in your phone.
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
international calls
88
calls
If your phone service includes international
dialing, press and hold 0 to insert your local
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
speed dial
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
1 From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
voicemail
Note: To receive voice mail messages, you
must first set up a voice mail account with
your service provider.
receiving a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
To call your service provider’s voice mail
system and listen to the message:
To check voicemail messages:
2 Press #.
Press the soft key under Call.
3 Press N.
To dismiss the message notification:
turbo dial
If the flip is closed, press the smart key . on
the top.
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
If the flip is open, press r, Back, or close the
flip.
calls
89
If the caller leaves a message, this icon y
appears on the display, reminding you that
you have a new message.
selective dynamic
group (SDG) calls
A SDG call is similar to a Private call, but is
made to all members of a SDG list at once. A
SDG list is a group of Private IDs that you
create using your phone. A SDG list must
contain at least 2 members and can contain
up to 20 members.
You can create a SDG list for one call only or
store it to Contacts so you can call it any time.
Note: In order to store SDG lists to your
phone, you must use a SDG-capable SIM
card. For more information about SDGcapable SIM cards, contact your service
provider. SDG lists created with your phone
90
calls
are not readable by an older iDEN SIM-based
phone.
You can use Send via PTT to send SDG
lists to other phones that have this
capability.
create SDG lists in contacts
Shortcut: From the home screen press under Contcs.
1 Select [New SDG List].
Tip: You can also create a SDG list by
selecting [New Contact] and assigning the
SDG contact type. See “store a phone
number or private ID” on page 20.
2 If you want to assign a name to the SDG
list, enter the name.
Note: If you do not assign a name, the
SDG list is named “SDG” followed by the
number of members in the SDG list. For
example, “SDG (8)” for a SDG list with 8
members.
checkmark appears next to each selected
item.
3 Add Private IDs. See “Adding Private
Numbers” below.
Tip: To deselect a selected item, highlight it
and press r.
4 If you want to create a voice name for the
SDG list, select [Options] > Voice Name. As
directed by the screen prompts, say and
repeat the voice name you want to assign
to the SDG list. Speak clearly into the
microphone.
You can also enter Private IDs from the
keypad.
5 Press - under Save.
add private numbers
You can add Private IDs to a SDG list by
selecting them from Contacts, the recent
calls list, or memo. You can add all members
in an existing SDG list by selecting the list.
You can select more than one member from
Contacts and the recent calls list. A
add members from Contacts,
the recent calls list, or Memo
1 While creating a SDG list, select [Add
Member] or select [Add Number] and press under Browse.
Tip: To move between Contacts, the
recent calls list, and Memo, scroll
left
or right.
2 Scroll to the members you want from
Contacts, the recent calls list, or Memo,
and press r. A checkmark appears next
to each selected member.
calls
91
Tip: To deselect a selected member, highlight
it and press r.
3 Press - under Done.
4 Press M > Remove Member.
5 Press - under Save.
add members manually from
the keypad
remove all members from a SDG list
1 From Contacts, scroll to the SDG list you
want to delete the member from.
1 While creating a SDG list, select [Add
Number].
3 Press M > Remove All Members.
2 Enter the Private number using the
keypad.
remove members or SDG lists
remove a member from a SDG list
1 From Contacts, scroll to the SDG list you
want to delete the member from.
2 Press - under Edit.
3 Scroll to the member you want to
remove.
92
calls
2 Press - under Edit.
4 Press - under Yes to confirm.
delete a SDG list from Contacts
1 Scroll to the SDG list you want to delete.
2 Press M > Delete SDG List.
make SDG Calls
1 From Contacts or the recent calls list,
scroll to or select the SDG list you want.
or
Press and hold t until a prompt appears
telling you to say the voice name. Say the
voice name assigned to the SDG list you
want.
or
From the home screen, press the number
on your keypad for the shortcut you
assigned to the SDG list you want.
or
Enter or select a Private ID and add more
Private IDs. “start a SDG call with a
private” below.
2 Push the PTT button.
1 From the home screen, enter the Private
ID.
or
From the Contacts list, scroll to an entry
containing the Private ID.
or
From recent calls list, scroll to an entry
containing the Private ID.
2 Press M > Call SDG.
3 Add more Private IDs. See “add private
numbers” on page 91.
If you want to save the SDG list you have
created press M > Store SDG.
start a SDG call with a private
or
You can start a SDG call with any Private ID
you want to call.
If you do not want to save the SDG list,
press - under Done.
Note: Choose the first Private ID that you
want in the SDG call:
4 Push the PTT button to make the call.
calls
93
SDG call Information
While you are in a SDG call, the following
appears on the screen:
• The name of the SDG list
A A member of the SDG list who is active
on the SDG call, but not speaking.
• The name or the Private ID of the
person speaking
O A member of the SDG list who has
exited the call.
• The number of participants in the SDG
call
U A member of the SDG list who could not
be reached on the SDG call.
SDG Call Details
During a SDG call, you can view details about
the other SDG list members, such as their
name or Private ID, and their status on the
call. To view SDG call details, press - under
Details.
In the SDG Call Details view, these icons
appear next to member names or Private IDs:
94
T The member of the SDG list who is
speaking.
calls
u A member of the SDG list whose status
is unknown.
customize
volume
ring tones
Press the volume
keys to:
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
• turn off an
incoming call alert
• change the
earpiece volume during calls
• change the ringer volume from the
home screen
Tip: You you can quickly set your ringer
to Vibrate All by holding the down volume
key in the home screen.
Note: Only ring tones stored in your phone’s
memory are available in the ring tones list. To
assign a ring tone stored on a memory card
inserted in your phone’s memory card slot,
you must go to the media center. Not all audio
files can be assigned as ring tones.
Find it: M > j > Ring Tones
1 Make sure Vibrate All is set to Off.
2 Scroll through the list of ring tones and
select the one you want to assign. Vibrate
customize
95
sets your phone to vibrate instead of
making a sound; Silent sets your phone to
neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
3 Select the features you want to assign the
ring tone to.
4 When you are finished, press - under
Done.
Note: This icon M appears on the display if
you set your phone to Silent. This icon Q
appears on the display if you set the phone to
Vibrate All.
set your phone to vibrate
You can set your phone to vibrate instead of
making a sound when you receive all phone
calls, Private calls, group calls, SDG calls, call
alerts, messages notifications, pictures sent
using Send via PTT, and Datebook reminders.
Find it: M > j > Ring Tones > Vibrate All
96
customize
Set this option to On or Locked.
Setting this option to On lets you turn Vibrate All
off by pressing the up volume control. Setting
this option to Locked requires you to press and
hold the up volume control to turn Vibrate All
off. The Locked option helps prevent you from
accidentally turning Vibrate All off.
Tip: To set Vibrate All to On or Locked using the
volume controls: Press the volume controls to
turn down the volume as far as possible to set
Vibrate All to On. Continue to hold the down
volume control to set Vibrate All to Locked.
To set your phone to vibrate instead of
making a sound for some features but not
others:
Find it: M > j > Ring Tones.
1 Make sure Vibrate All is set to Off.
2 Select Vibrate from the list of ring tones.
3 Select the features you want to set to
make no sound.
4 When you are finished, press - under
Done.
wallpaper
Set a photo or picture as a wallpaper
(background) image in your phone’s external
display, home screen or throughout all menu
screens.
Find it: M > u > Display/Info > Wallpaper.
To select a wallpaper image:
1 Scroll through the list of pictures and
press r to select the picture of your
choice.
Note: You can set the wallpaper to change
automatically after a certain period of time by
turning on the Auto Cycle feature located in the
Wallpaper menu.
datebook
Find it: M > m > Datebook > M > Setup.
You can view or change these options:
options
Start View: Sets Datebook to start in day view,
week view, or month view when you
access Datebook.
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in
week view, if you have a 12-hour day view.
Delete After: Sets the amount of time
Datebook waits to delete an event after it
occurs.
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
Alert Timeout: Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
customize
97
options
Clock: Controls whether the time and date
appear on the home screen; sets time and
date format; sets year.
hide or show
location information
Your phone is equipped with a Location
feature for use in connection with locationbased services that may be available in the
future.
The Location feature allows the network to
detect your position. Turning Location off will
hide your location from everyone except 911.
Note: Turning Location On will allow the
network to detect your position using GPS
technology, making some applications and
services easier to use. Turning Location off
will disable the GPS location function for all
98
customize
purposes except 911, but will not hide your
general location based on the cell site serving
your call. No application or service may use
your location without your request or
permission. GPS-enhanced 911 is not
available in all areas.
set your Privacy Options
Find it: M > m > GPS > Privacy.
Select from the following options:
option
Restricted: No Java or similar software
applications may view the location of your
phone. However, location information may
still be available to the phone’s owner, fleet
manager, or account administrator.
Unrestricted: All applications may view the
location of your phone, without notifying
you.
option
By Permission: When an application attempts
to view the location of your phone, you will
be prompted to give permission. However,
location information may still be available to
the phone’s owner, fleet manager, or
account administrator.
customize
99
other features
advanced calling
feature
call waiting
To accept the second call
and put the active call on
hold press - under Yes.
To accept the second call
and end the active call press
O.
Your phone rings with the
second call for you to
answer.
100
other features—advanced calling
feature
3-way call
Make or receive a phone call
and press M > 3 Way. Enter
the second phone number,
press N and - under Join.
For quick ways to enter the
number, press M to see
the dialing menu.
You cannot make any other
calls after you have joined a
3-way call, even if one party
disconnects.
feature
flip
activation
any key
answer
alarm clock
To make your handset to
answer and end calls by
opening and closing the flip
press M > u > Phone Calls
> Flip Activation.
Select Flip To Ans > On and Flip
to End > On.
To answer phone calls by
pressing any key on the
keypad press M > u >
Phone Calls > Any Key Ans > On.
feature
access
alarm clock
stop watch
quick timer
To access the alarm clock
press M > T > Alarm Clock
Plus
To set the alarm clock press
- under Set. Use
to set
the desired time and press
- under Done.
To access the stop watch
press M > T > Alarm Clock
Plus > M > Stopwatch
Press - under Start
To access the quick timer
press M > T > Alarm Clock
Plus > M > Quick Timer
Use
to set the desired
time and press - under
Start
other features—alarm clock
101
feature
do not
disturb
contacts
To access Do not disturb
press M > T > Alarm Clock
Plus > M > Do Not Disturb.
Press - under Yes.
“Do Not Disturb”mode will
allow you to turn off your
phone’s transmitters. When
your phone is set to Do Not
Disturb, no incoming phone or
private calls will be received.
Note: Alarm Clock features only work when
the handset is powered On.
feature
edit/delete
contact
entry
Press - under Contacts.
Select a contact and press
M > Edit. Change the
desired content and press
- under Save.
set ringer ID Press - under Contacts.
Select a contact and press
M > Edit > [Ring Tone/Picture].
set picture
ID
Select desired ringer and
press - under Back > under Save
Press - under Contacts.
Select a contact and press
M > Edit > [Ring Tone/Picture].
Select desired picture and
press - under Back > under Save
102
other features—contacts
datebook
feature
create
datebook
events
see datebook
event
event
reminder
To create a new Datebook
event press M > m >
Datebook > [New Event].
To see a calendar event
press M > m > Datebook.
Press
left or right to see
the day and
up or down
to see the events.
When an event reminder
occurs press - under View.
Press - under Back to close
the reminder.
feature
receive
datebook
events via
PTT
To view the information
while still in the Private call
press r.
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent
calls list.
To store events to the
Datebook press - under
Save while viewing the event
you want to store.
other features—datebook
103
GPS
Note: To improve GPS performance:
• Stay in the open
• Move away from other electrical or
electronic devices
• Remain stationary.
• Avoid touching the antenna with your
hands.
feature
view
To see your approximate
approximate location press M > m >
location
GPS > Position. Scroll to view
the entire screen.
To recalculate position press
Refresh. This may take several
minutes.
104
other features—GPS
feature
set GPS
privacy
options
To set the level of privacy
for your GPS system press
M > m > GPS > Privacy.
If your GPS PIN security
feature is enabled, enter
your GPS PIN and select the
privacy option you want.
change GPS Note: When you receive
PIN
your phone, your GPS PIN is
0000.
To change your GPS PIN
press M > m > Security >
Change Passwords > GPS PIN.
Enter the current GPS PIN
and enter the new 4- to 8digit GPS PIN. Re-enter the
new 4- to 8-digit GPS PIN to
confirm.
handsfree
Note: The use of wireless phones while
driving may cause distraction. Discontinue a
call if you can't concentrate on driving.
Additionally, the use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey the
laws and regulations on the use of these
products.
feature
speakerphone
feature
auto
answer
To automatically answer
calls when connected to a
car kit or headset press M
> u > Phone Calls > Auto Ans.
Select the amount of rings
before answering.
Activate the speakerphone
while driving:
Press and hold the
speakerphone key t or
press - under Options >
Speaker.
other features—handsfree
105
memory card
feature
change
storage
preferences
To choose whether media
items are saved to your
phone's memory or to the
memory card press M >
u > Memory Card > Store Media
> On Phone or Prefer On Card.
Note: If the memory card is
not in the phone, even if you
choose Prefer On Card, the
media items are saved to
your phone's memory.
106
other features—memory card
feature
manage
memory
To view your used memory,
free memory, memory
capacity, and number of
files in phone memory press
M > j > Memory Usage.
To free memory on your
phone, delete items from
the media center, voice
records, or Java
applications. To free
memory on the memory
card, delete items from the
card's folders.
pc applications
feature
other PC
For a list of complete PC
applications applications visit
www.motorola.com/iden
personalize
feature
language
backlight
time length
To set the language of your
menu press M > u >
Display/Info > Language.
To select how long the
display screen and keypad
are backlit press M > u
> Display/Info > Backlight > Timer.
feature
menu style
clock
display
To display the main menu as
tabs, graphic icons or a textbased list press M > u >
Display/Info > Menu View.
To display the clock on the
home screen press M >
u > Display/Info > Clock >
Display > On
TTY
feature
turn On TTY From the home screen
feature
press M > u > Phone Calls
> TTY > Use TTY > On.
choose TTY From the home screen
mode
press M > u > Phone Calls
> TTY > Type.
Select from TTY, VCO or HCO.
other features—pc applications
107
feature
change the
TTY baud
rate
From the home screen
press M > u > Phone Calls
> TTY > Baud.
Select 45.45 or 50.00
While in the TTY call, press
M > In Call Setup > TTY > Type.
change TTY
mode
during a call Select from TTY, VCO or HCO.
108
enable SIM
PIN
change SIM
PIN
security
feature
phone lock
feature
keypad lock To lock the keypad press
M > u > Security > Keypad
Lock > Lock Now or Auto Lock
To lock the phone press M
> u > Security > Phone Lock >
Lock Now or Auto Lock.
other features—security
Shortcut: To lock the
keypad press M > *
To enable SIM PIN, press
M > u > Security > SIM PIN >
On.
To change the SIM PIN,
press M > u > Security >
Change Passwords > SIM PIN.
Note: You can make emergency calls on a
locked phone (see page 88). A locked phone
still rings or vibrates for incoming calls or
messages, but you need to unlock it to
answer.
Important Safety and
Legal Information
109
Safety and General Information
This section contains important information on the safe and
efficient operation of your phone. Read this information
before using your integrated multi-service portable radio.*
Safety Information
Exposure to Radio Frequency (RF)
Energy
Your phone contains a transmitter and receiver. When it is ON, it
receives and transmits RF energy. When you communicate with
your phone, the system handling your call controls the power level
at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
Portable Radio Product Operation and
EME Exposure
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
110
Safety Information
• United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
• American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.*
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
• Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
• ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) "Regulation of the limitation of exposure to
* The information provided in this document supersedes
the general safety information in user’s guides
published prior to May 1, 2006
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2, 2002."
Operational Precautions
To assure optimal radio product performance and to be sure that
human exposure to RF does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions:
Phone Operation
When placing or receiving a phone call, hold your radio product as
you would a wireline telephone. Speak directly into the
microphone.
Two-way radio operation
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips.
If you wear a radio product on your body when
transmitting, always place the radio product in a Motorola
approved clip, holder, holster, case or body harness. If you do not
use a body-worn accessory supplied or approved by Motorola and
are not using the radio product in the intended use positions along
side the head in the phone mode or in front of the face in the
two-way radio mode, or if you hang your device from a lanyard
around your neck, keep the device at least 2.5 centimeters (1 inch)
from your body when transmitting.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or
visit our website at www.motorola.com/iden.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your handset may cause interference with other
devices.
Safety Information
111
Follow Instructions to Avoid Interference
Problems
your wireless phone with your implantable medical device, consult
your health care provider.
Turn OFF your radio product where posted notices instruct you to
do so.
In an aircraft, turn off your radio product whenever instructed to do
so by airline staff. If your radio product offers an airplane mode or
similar feature, consult airline staff about using it in flight.
Hearing Aids
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this radio
product.
Persons with implantable medical devices should observe the
following precautions:
• ALWAYS keep the phone more than 20 centimeters (8
inches) from the implantable medical device when the
phone is turned ON.
• DO NOT carry the phone in a breast pocket;
• Use the ear opposite the implantable medical device to
minimize the potential for interference.
• Turn OFF the phone immediately if you have any reason to
suspect that the interference is taking place.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
112
Safety Information
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
Other Medical Devices and Health Care Facilities
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Driving Precautions
Check the laws and regulations on the use of radio products in the
area where you drive. Always obey them.
When using your radio product while driving, please:
• Give full attention to driving and to the road. Using a
phone may be distracting. Discontinue a call if you can’t
concentrate on driving.
• Use hands free operation, if available.
• Pull off the road and park before making or answering a
call if driving conditions so require.
• Do not place a handset in the airbag deployment area.
Responsible driving practices can be found in the “Smart Practices
While Driving” section at the end of this guide and/or at the
Motorola Web site: www.motorola.com/callsmart.
Note: The use of wireless phones while driving may cause
distraction. Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Operational Warnings
Batteries and Chargers
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Symbol
032374o
Obey all posted signs when using phones in public areas.
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
032376o
032375o
Definition
Important safety information
follows.
Do not dispose of your battery
or phone in a fire.
Your battery or phone may
require recycling in
accordance with local laws.
Contact your local regulatory
authorities for more
information.
Do not throw your battery or
phone in the trash.
Li Ion BATT
032378o
Your phone contains an
internal lithium ion battery.
Safety Information
113
Symbol
Definition
Do not let your battery,
charger, or phone get wet.
Listening at full volume to
music or voice through a
headset may damage your
hearing.
Choking Hazards
Your portable radio or its accessories may include detachable
parts, which may present a choking hazard to small children. Keep
your device and its accessories away from small children.
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your phone.
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Caution About High Volume Usage
Listening at full volume to music or voice through a
headset may damage your hearing.
Glass Parts
Some parts of your phone may be made of glass. This glass could
break if the product is dropped on a hard surface or receives a
substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your phone until the glass is replaced by a
qualified service center.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
114
Safety Information
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
Service & Repairs
If you have questions or need assistance, we’re here to help.
Go to www.motorola.com/iden, where you can select from a
number of customer care options. You can also contact the
Motorola Customer Support Center at 1 (800) 453-0920 (United
States), 1 (877) 483-2840 (TTY, TDD United States for hearing
impaired).
Export Law Assurances
Service & Repairs
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
Service & Repairs
115
Specific Absorption Rate Data
SAR Data
ALL MODELS WITH FCC ID IHDT56HF1 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are
conducted using standard operating positions reviewed by the FCC
with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
116
SAR Data
general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that is does not exceed the limit
established by the requirement adopted by the government for
safe exposure. The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by the FCC for
each model. The highest SAR value for this model phone when
tested for use at the ear is 1.31 W/kg and when tested on the
body, as described in this user guide, is 1.51 W/kg during packet
data transmission. (Measurements for phones worn on the body
differ among models, depending upon available accessories and
FCC requirements.)2
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement for safe exposure. Please note that improvements to
this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
(CTIA) web-site at http://www.ctia.org or the Canadian Wireless
Telecommunications Association (CWTA) Web site:
http://www.cwta.ca
1. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to account
for any variations in measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for
this product.
SAR Data
117
Limited Warranty Motorola Communications Products
(International)
Warranty
What Does this Warranty Cover?
MOTOROLA warrants the MOTOROLA manufactured iDEN
Communication Products listed below (“Product”) against defects
in material and workmanship under normal use and service for a
period of time from the date of purchase as scheduled below:
Products Covered
Length of Coverage
iDEN Suscriber
Digital Mobile and
Portable Units
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Product Accesories
(manufactured by or
under license from
MOTOROLA).
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
Batteries.
One (1) year from the date of
purchase by the first consumer
purchaser of the product unless
otherwise provided for below.
118
Warranty
Rechargeable Batteries will be replaced during the applicable
warranty period if:
• the battery capacity falls below 80% of rated capacity, or
• the battery develops leakage.
MOTOROLA, at its option, will at no charge either repair the
Product (with new or reconditioned parts), replace it (with a new or
reconditioned Product), or refund the purchase price of the Product
during the warranty period provided it is returned in accordance
with the terms of this warranty. Replaced parts or boards are
warranted for the balance of the original applicable warranty
period. All replaced parts of Product shall become the property of
MOTOROLA.
This express limited warranty is extended by MOTOROLA to the
original end user purchaser only and is not assignable or
transferable to any other party. This is the complete warranty for
the Product manufactured by MOTOROLA. MOTOROLA assumes
no obligations or liability for additions or modifications to this
warranty unless made in writing and signed by an officer of
MOTOROLA. Unless made in a separate agreement between
MOTOROLA and the original end user purchaser, MOTOROLA does
not warrant the installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary
equipment not furnished by MOTOROLA which is attached to or
used in connection with the Product, or for operation of the Product
with any ancillary equipment, and all such equipment if expressly
excluded from this warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims liability for range,
coverage, or operation of the system as a whole, or any portion of
the system not produced by MOTOROLA, under this warranty.
General Provisions:
This warranty sets forth the full extent of MOTOROLA’S
responsibilities regarding the Product, Repair, replacement or
refund of the purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY TO
THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. IN NO
EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS
OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF
USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST
PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH
MAY BE DISCLAIMED BY LAW.
How to Get Warranty Service:
You must provide proof of purchase (bearing the date of purchase
and Product item serial number) in order to receive warranty
service and, also, deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of
its authorized warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer or
communication service provider), it can facilitate your obtaining
warranty service.
What This Warranty Does Not Cover:
• Defects or damage resulting from use of the Product in
other than its normal and customary manner.
• Defects or damage from misuse, accident, water, or
neglect.
• Defects or damage from improper testing, operation,
maintenance, installation, alteration, modification, or
adjustment.
• Breakage or damage to antennas unless caused directly by
defects in material workmanship.
Warranty
119
• A Product subjected to unauthorized Product
modifications, disassembles or repairs (including, without
limitation, the audition to the Product of non-MOTOROLA
supplied equipment).
• Product which has had the serial number removed or made
illegible.
• Rechargeable batteries if:
Any of the seals on the battery enclosure of cells are
broken or show evidence of tampering.
The damage or defect is caused by charging or using the
battery in equipment or service other than the Product for
which it is specified.
• Freight costs to the repair depot.
• A Product which, due to illegal or unauthorized alteration
of the software/firmware in the Product, does not function
in accordance with MOTOROLA’S published specifications
or the local type acceptance labeling in effect for the
Product at the time the Product was initially distributed
from MOTOROLA.
• Scratches or other cosmetic damage to Product surfaces
that does not effect the operation of the Product.
• Normal and customary wear and tear.
• Exclusion for defects or damage arising from use of the
products in connection with non-MOTOROLA equipment.
120
Warranty
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a patent, and Motorola will
pay those costs and damages finally awarded against the end user
purchaser in any such suit which are attributable to any such
claim, but such defense and payments are conditioned on the
following:
• That MOTOROLA will be notified promptly in writing by
such purchaser of any notice of such claim;
• That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
• Should the Product or parts become, or in MOTOROLA’S
opinion be likely to become, the subject of a claim of
infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure
for such purchaser the right to continue using the Product
or parts or to replace or modify the same so that it
becomes non infringing or to grant such purchaser a credit
for the Product or parts as depreciated and accept its
return. The depreciation will be an equal amount per year
over the lifetime of the Product or parts as established by
MOTOROLA.
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential
damages arising from any claim of patent infringement or alleged
infringement.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
Warranty
121
Hearing Aid Compatibility
HAC
A number of Motorola phones have been tested for hearing aid
compatibility. When some wireless phones are used with certain
hearing aids, users may detect a noise which can interfere with
the effectiveness of the hearing aid.
Some hearing aids are more “immune” than others to this
interference noise, and phones can also vary in the amount of
interference noise they may generate. ANSI standard C63.19 was
developed to provide a standardized means of measuring both
mobile phone and hearing aids to determine usability rating
categories for both.
Ratings have been developed for mobile phones to assist hearing
aid users find phones that may be compatible with their hearing
aid. Not all phones have been rated for compatibility with hearing
aids. Phones that have been rated have a label with the rating(s)
located on the box, and at www.motorola.com/accessibility.
These ratings are not guarantees of compatibility. Results will vary
depending on the user's hearing aid and individual type and degree
of hearing loss. If a hearing aid is particularly vulnerable to
interference, even a phone with a higher rating may still cause
unacceptable noise levels in the hearing aid Trying out the phone
with your hearing aid is the best way to evaluate it for your
personal needs.
122
HAC
“M” Rating: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing aids than unrated phones. (M4 is the
“better” or higher of the two ratings.) On those models with an
extendable antenna, this rating is determined only with the
antenna extended.
“T” Rating: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing aid's telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. (T4 is the “better” or
higher of the two ratings.) On those models with a telecoil mode
setting, this rating is determined only with the phone so set. For
setting instructions, see “Features for the Hearing Impaired” in the
section entitled “Advanced Calling Features”. Note that not all
hearing aids have telecoils in them.
Hearing aids may also be measured for immunity to interference
from wireless phones and may have ratings similar to wireless
phones. Ask your hearing health care professional for the rating of
your hearing aid. Add the rating of your hearing aid and your phone
to determine the estimated usability:
• Any combined rating equal to or greater than six offers
excellent use.
• Any combined rating equal to five is considered normal
use.
• Any combined rating equal to four is considered usable.
Thus, if you use an M3 phone with a M3 hearing aid you will have
a combined rating of six for “excellent use.” This methodology
applies equally for T ratings.
More information about hearing aid compatibility may be found at:
www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and
www.hearingloss.org/learn/cellphonetech.asp
HAC
123
Information From the World Health Organization
WHO Information
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
Product Registration
Registration
Online Product Registration:
http://direct.motorola.com/hellomoto/
Motosupport/source/registration.asp
Product registration is an important step toward enjoying your new
Motorola product. Registering helps us facilitate warranty service,
and permits us to contact you should your product require an
update or other service. Registration is for U.S. residents only and
is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
124
WHO Information
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf
Wireless: The New Recyclable
Recycling
Your wireless phone can be recycled. Recycling your phone
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
http://recycling.motorola.young-america.com/ index.html
California Perchlorate Label
Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
“Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
There is no special handling required by consumer.
Recycling
125
Patent and Trademark Information
Patent and Trademark
MOTOROLA, the Stylized M Logo and all other trademarks
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2007 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
126
Patent and Trademark
Software Copyright Notice
The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in
semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola and third party
software providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or reproduce
the copyrighted software. Accordingly, any copyrighted software
contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to
the extent allowed by law. Furthermore, the purchase of the
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
Privacy and Data Security
Privacy and Data Security
Motorola understands that privacy and data security are important
to everyone. Because some features of your phone may affect your
privacy or data security, please follow these recommendations to
enhance protection of your information:
• Monitor access: Keep your phone with you and do not
leave it where others may have unmonitored access. Lock
your device’s keypad where this feature is available.
• Keep software up to date: If Motorola or a
software/application vendor releases a patch or software
fix for your phone which updates the device’s security,
install it as soon as possible.
• Erase before recycling: Delete personal information or
data from your phone prior to disposing of it or turning it in
for recycling. For step-by-step instructions on how to
delete all personal information from your device, please
contact your local service provider.
• Understanding AGPS: In order to comply with
emergency caller location requirements of the FCC, certain
Motorola phones incorporate Assisted Global Positioning
System (AGPS) technology. AGPS technology also can be
used in non-emergency applications to track and monitor a
user’s location, for example, to provide driving directions.
Users who prefer not to permit such tracking and
monitoring should avoid using such applications.
If you have further questions regarding how use of your phone may
impact your privacy or data security, please contact Motorola at
[email protected], or contact your service provider.
Privacy and Data Security
127
Smart Practices While Driving
Drive Safe, Call Smart SM
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas. Go to www.motorola.com/callsmart
for more information.
Your phone lets you communicate by voice and data, almost
anywhere, anytime, wherever wireless service is available and
safe conditions allow. When driving a car, driving is your first
responsibility. If you choose to use your phone while driving,
remember the following tips:
• Get to know your Motorola phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking your
attention off the road.
• When available, use a hands-free
device. If possible, add an additional
layer of convenience to your phone with
one of the many Motorola Original
hands-free accessories available today.
• Position your phone within easy reach. Be able to
access your phone without removing your eyes from the
Driving Safety
128
Driving Safety
•
•
•
•
•
road. If you receive an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
Use your phone to call for help. Dial 911 or other local
emergency number in the case of fire, traffic accident, or
medical emergencies.**
• Use your phone to help others in emergencies. If you
see an auto accident, crime in progress, or other serious
emergency where lives are in danger, call 911 or other
local emergency number, as you would want others to do
for you.**
• Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number.*
* Wherever wireless phone service is available.
Driving Safety
129
index
A
accessories 10, 105
active phone line 76
advanced calling 100
3-way calls 100
call waiting 100
alarm clock 101
do not disturb 102
quick timer 101
stop watch 101
alert
set 95, 96
turn off 85, 95
answer a call 18
B
backlight 107
130
index
battery charging 15
battery indicator 76
battery installation 15
Bluetooth
connect 70
send information 71
setting your phone 69
turning on or off 69
bluetooth 69
C
call
answer 18
any key answer 101
end 18
make 18
call forward 86
caller ID 86
Calls
SDG, see SDG calls
camera 36, 39
digital viewfinder 41
photo editor 41
record video 40
self-timer 40
center key 79
center select key 10
clock 107
clock screen saver 73
contacts 102
edit/delete 102
set picture ID 102
set ringer ID 102
D
datebook 103
create events 103
receive events
via PTT 103
setup 97
view reminders 103
dial a phone number 18
dialed calls 85
display 75
Drafts 24
see also text messages,
drafts
E
earpiece volume 95
emergency number 88
end a call 18
end key 18
export regulations 115
F
features for the vision
impaired 83
flip 18
flip activation 101
frequently asked questions
service and repairs 115
G
GPS 104
approximate location 104
privacy options 104
GPS enabled
emergency calls 88
GPS, see GPS enabled
H
handsfree 105
auto answer 105
speaker-phone 105
handsfree speaker 79
hearing aid 82
Hearing Aid
Compatibility 122
home screen 75
I
Icons
SDG 94
international calls 88
L
language 107
low battery message 76
M
main menu 76
make a call 18
media center 36
memory card 11, 106
manage memory 106
ring tones 95
index
131
storage preferences 106
menu style 107
Message center
text messages 23
message indicator 76
MMS 53
modem
using your
handset as a 27
music player 29
N
navigation key 10, 79
O
one touch PTT 51
optional accessory 10, 105
optional feature 10
optional features 10
P
packet data 76
PC applications 107
personalize 107
phone number 22
power key 17
private calls
answer 20
call alerts 19
make 18
receive a call alert 20
PT Manager 53
PTV features 43
PTX manager 53
Q
quick notes
create, edit 23, 24
R
radio frequency 110
132
index
received calls 85
recent calls 85
recycling 125
redial 86
ring style indicator 76
ring style, setting 95
ring tones
off 96
setting 95
vibrate 96
ring tones, setting 95
ringer volume 95
S
safety
radio frequency 110
RF energy
interference 111
safety information 110
safety tips 128
SDG calls
icons 94
lists, adding numbers 91
lists, creating 90
lists, deleting 92
lists, removing
members 92
starting 93
SDG list
save entries 52
security 108
Selective Dynamic Group
Calls, see SDG calls
send key 18
signal strength indicator 75
SIM card 11
change SIM PIN 108
enable SIM PIN 108
soft keys 75
speaker 76
speed dial 89
store your number 22
T
text 22
text entry 76
alpha method 78
word method 77
text messages 22, 27
creating 24
deleting 25, 26
drafts 24
memory 25
message center 23
receiving 23
resend messages 25
sending 24
sent messages 25
setting up 22
TTY calls 107
receiving 89
setting up 89
voice names 87
voicemail 89
voicemail message
indicator 89
volume 95
W
wallpaper 97
WHO information 124
Y
your phone number 22
V
video 41
voice mail
index
133
134
index
www.motorola.com
NNTN7280B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement