advertisement
X99-DELUXE
Series
ii
E9504
First Edition
August 2014
Copyright© 2014 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software
Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from http://support.asus.com/download or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address [email protected], stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
Contents
Chapter 1:
Product Introduction
Product highlights........................................................................1-1
Other special features .................................................................1-2
Before you proceed .....................................................................1-3
Motherboard layout .....................................................................1-4
Central Processing Unit (CPU) ...................................................1-6
System memory ..........................................................................1-7
Expansion slots .........................................................................1-12
Onboard buttons and switches..................................................1-15
1.2.8 Onboard LEDs ..........................................................................1-21
1.2.9 Internal connectors....................................................................1-27
Chapter 2: Basic installation
2.1.1 Motherboard installation ..............................................................2-1
CPU installation...........................................................................2-3
CPU heatsink and fan assembly installation ...............................2-5
DIMM installation.........................................................................2-6
ATX Power connection................................................................2-7
SATA device connection .............................................................2-8
Front I/O Connector ....................................................................2-9
Expansion Card installation.......................................................2-10
Wi-Fi antenna installation ..........................................................2-13
Motherboard rear and audio connections .............................................2-15
Rear I/O connection ..................................................................2-15
Audio I/O connections ...............................................................2-17
iii
iv
Chapter 3: BIOS setup
EZ Mode......................................................................................3-3
Advanced Mode ..........................................................................3-4
QFan Control...............................................................................3-7
3.2.4 EZ Tuning Wizard .......................................................................3-9
3.6.1 CPU Configuration ....................................................................3-33
PCH Configuration ....................................................................3-35
PCH Storage Configuration.......................................................3-36
System Agent Configuration .....................................................3-38
USB Configuration ....................................................................3-39
Platform Misc Configuration ......................................................3-41
Onboard Devices Configuration ................................................3-42
APM Configuration ....................................................................3-45
Network Stack Configuration.....................................................3-45
3.9.1 ASUS EZ Flash 2 Utility ............................................................3-57
ASUS O.C. Profile .....................................................................3-58
ASUS DRAM SPD Information .................................................3-59
3.11.2 ASUS EZ Flash 2 ......................................................................3-61
3.11.3 ASUS CrashFree BIOS 3 ..........................................................3-63
Appendices
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.
• Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified service technician or your retailer.
v
vi
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
1. Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
2. Chapter 2: Basic installation
This chapter lists the hardware setup procedures that you have to perform when installing system components.
3. Chapter 3: BIOS setup
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1. ASUS website
The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products.
2. Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Italics
<Key>
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+). vii
viii
X99-DELUXE specifications summary
CPU
Chipset
Memory
Expansion slots
Multi-GPU support
Storage
LGA2011-v3 socket for Intel ® Core™ i7 processors
Supports 22nm CPU, up to 20 MB Smart Cache*
Supports Intel ® Turbo Boost Technology 2.0*
* The support of these features depends on the CPU types.
Intel ® X99 Express Chipset
8 x DIMM, max. 64 GB, DDR4 2800 (O.C.)* / 2666 (O.C.)* / 2400
(O.C.)* / 2133 MHz, non-ECC, un-buffered memory
Quad channel memory architecture
Supports Intel ® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of individual
CPUs. Please refer to Memory QVL (Qualified Vendors List) for details.
40-LANE CPU
5 x PCI Express 3.0/2.0 x16 slots* (single at x16, dual at x16/x16, triple at x16/x16/x8, quad at x8/x8/x16/x8, or quintuple at x8/x8/x8/x8/ x8 mode)
1 x PCI Express 2.0 x4 slot** (compatible with PCIe x1 and x4 devices)
28-LANE CPU
3 x PCI Express 3.0/2.0 x16 slots (single at x16, dual at x16/x8, triple at x8/x8/x8 mode)
2 x PCI Express 2.0 x16 slot (max. at x1 mode, compatible with PCIe x1 devices)
1 x PCI Express 2.0 x4 slot** (compatible with PCIe x1 and x4 devices)
* The PCIe x16_5 shares bandwidth with M.2 x4.
** The PCIe x4_1, USB3_E12 and SATAEXPRESS_E1 connectors share the same bandwidth. By default, the USB3_E12 and SATAEXPRESS_E1 will automatically run at x2 mode with PCIe x4_1 disabled when no device is installed on PCIe x4_1. Remember to adjust the bandwidth option in BIOS if you install any PCIe device on the PCIe x4_1 slot.
Supports NVIDIA ® 3-Way/Quad-GPU SLI™ Technology (with 2 PCIe x16 graphics card)
Supports AMD ® 3-Way/Quad-GPU CrossFireX™ Technology
Intel ® X99 Express Chipset with RAID 0, 1, 5, 10 and Intel
Rapid Storage Technology 13 support
®
1 x SATA Express port (gray at upper, compatible with 2 x SATA 6
Gb/s ports)
- 1 x M.2 socket 3 with vertical M Key design, type 2242/2260/2280 storage devices support (PCIE mode only)
- 8 x SATA 6.0 Gb/s ports* (4 x gray from controller 1, 4 x black from controller 2)
Supports Intel ® Rapid Storage Technology** (Intel ® Smart Response
Technology, Rapid Recover Technology)
(continued on the next page)
X99-DELUXE specifications summary
Storage
LAN
Wireless Data Network
Bluetooth
Audio
USB
ASMedia ® SATA Express controller***
- 1 x SATA Express ports (gray at bottom, compatible with 2 x
SATA 6 Gb/s ports)
* Due to chipset behavior, the SATA6G_78 and SATA6G_910 ports
(black) do not support Intel ® configuration.
Rapid Storage Technology including RAID
** These functions work depending on the CPU installed.
*** These SATA ports are for data hard drives only. ATAPI devices are not supported.
Gigabit LAN controllers—802.3az Energy Efficient Ethernet (EEE) appliance
Intel ® I218-V Gigabit LAN - Dual interconnect between the integrated Media Access Controller (MAC) and physical layer
(PHY)
Intel ® I211-AT Gigabit LAN controller
ASUS Turbo LAN utility
Speedy Wi-Fi 802.11 a/b/g/n/ac supports dual frequency band 2.4/5
GHz up to 1300 Mbit/s transfer speed
ASUS Wi-Fi GO! Utility
Bluetooth v4.0
Realtek ® ALC1150 8-channel high definition audio CODEC featuring Crystal Sound 2
- Separate layer for left and right track, ensuring both sounds deliver equal quality
- Top notch audio sensation delivers according to the audio configuration
- Audio shielding ensures precision analog/digital separation and greatly reduced multi-lateral interference
- Audio Amplifier to enhance the highest quality sound for headphone and speakers
- Premium Japan-made audio capacitors provide warm, natural, and immersive sound with exceptional clarity and fidelity
- High quality 112 dB SNR stereo playback output (Line-out at rear) and 104 dB SNR recording (Line-in) support
- Absolute pitch 192 KHz/24-bit True BD Lossless Sound
- BD audio layer content protection
- DTS UltraPC II
- DTS Connect
- Supports jack-detection, multi-streaming and front panel jackretasking (MIC)
- Optical S/PDIF out ports at rear I/O
Intel ®
Boost
X99 Express Chipset - supports ASUS USB 3.0
- 4 x USB 3.0/2.0 ports at mid-board for front panel support
- 6 x USB 2.0/1.1 ports (4 ports at mid-board, 4 ports at rear panel)
(continued on the next page) ix
x
X99-DELUXE specifications summary
USB
ASUS Exclusive
Features
ASUS Exclusive
Features
ASMedia ® USB 3.0 controller - support ASUS USB 3.0
Boost
- 2 x USB 3.0/2.0 ports at rear panel (blue)
ASMedia ® USB 3.0 Hubs - support ASUS USB 3.0 Boost
- 8 x USB 3.0/2.0 ports at rear panel (blue)
Flagship Performance
5-Way Optimization by Dual Intelligent Processors 5
- Whole system optimization with a single click! 5-Way
Optimization tuning key perfectly consolidates TPU, EPU,
DIGI+ Power Control, Fan Xpert 3, and Turbo APP together, providing better CPU performance, efficient power saving, precise digital power control, whole system cooling and even tailor your own app usages.
DIGI+ Power Control
CPU Power
- Industry leading digital 8-phase power design
- ASUS CPU power utility
DRAM Power
- Industry leading digital 4-phase DRAM power design
- ASUS DRAM power utility
TPU
- Auto Tuning, TPU, GPU Boost, 2-level TPU switch
EPU
- EPU, EPU switch
ASUS Fan Xpert3
- Featuring Fan Auto Tuning function and multiple thermistors selection for optimized system cooling control.
Turbo App
- Featuring automatic system performance tuning, network priority, and audio scene configuration for selected applications.
UEFI BIOS
- Most advanced options with fast response time
M.2 and SATA Express onboard
- The latest transfer technology with up to 32 Gb/s data transfer speeds for M.2
- The ultra-fast transfer technology with up to 10 Gb/s data transfer speeds for SATA Express
Special Memory O.C. Design
- Superb memory O.C. capability under full load by minimizing the coupling noise and signal reflection effect
Thunderbolt Ready (Optional)
- Blistering-fast 20 Gb/s data transfer upgrades with
ThunderboltEX II series
(continued on the next page)
X99-DELUXE specifications summary
ASUS Exclusive
Features
Powerful Home Server
ASUS HomeCloud Server
Wi-Fi GO!
- Wi-Fi GO! function: Cloud GO!, Remote Desktop, Remote
Keyboard & Mouse, File Transfer
- Wi-Fi GO! & NFC Remote app for portable smartphone/tablet, supporting iOS7 and Android 4.0 systems
Media Streamer
- Pipe music or movies from your PC to a smart TV
- Media Streamer app for portable smartphone/tablet, supporting iOS7 and Android 4.0 systems
NFC Express 2 support (Optional)
- NFC receiver and 2-port USB 3.0 hub
- NFC one-touch features: Video-to-go, Photo Express, Remote
Desktop, Quick Launch, Windows ® 8 Login and Bluetooth pairing
Gamers and Professionals
Turbo APP
- Perform each application with tailored performance, network priority, and audio configuration for your needs
Turbo LAN
- Experience smooth online gaming with lower pings and less lags
Crystal Sound 2
- Feel the sound power with different usage scenarios
Steam support
- Compatible with the most fun gaming platform under
Windows ® system
ASUS EZ DIY
Push Notice
- Monitor your PC status with smart devices in real time
USB BIOS Flashback
- with USB BIOS Flashback Wizard for EZ BIOS download scheduling
UEFI BIOS
- featuring friendly graphics user interface
- ASUS O.C. Tuner
- ASUS CrashFreeBIOS 3
- ASUS EZ Flash 2
Q-Design
- ASUS Q-Code
- ASUS Q-Shield
- ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)
- ASUS Q-Slot
(continued on the next page) xi
xii
X99-DELUXE specifications summary
ASUS Exclusive
Features
ASUS Special Features
ASUS Quiet Thermal
Solution
ASUS Exclusive
Overclocking Features
Rear Panel I/O Ports
- ASUS Q-DIMM
- ASUS Q-Connector
ASUS 5X Protection:
- ASUS DIGI+VRM - 8 phase digital power design
- ASUS Enhanced DRAM Overcurrent Protection - Short circuit damage prevention
- ASUS ESD Guards - Enhanced ESD protection
- ASUS High-Quality 5K-Hour Solid Capacitors - 2.5x long lifespan with excellent durability
- ASUS Stainless Steel Back I/O - 3x more durable corrosionresistant coating
USB 3.0 Boost
USB Charger+
Ai Charger+
Disk Unlocker
AI Suite 3
MemOK!
EZ XMP
Quiet Thermal Design
- ASUS Fan Xpert 3
- ASUS Fanless Design: Heat-pipe solution with an aesthetic streamline IO cover
Precision Tweaker 2
- vCore: Adjustable CPU Core voltage at 0.001 V increment
- iGPU: Adjustable CPU Graphics voltage at 0.001 V increment
- vCCIO: Adjustable Analog and Digital I/O voltage at 0.001 V increment
- vCCIN: Adjustable CPU Input voltage at 0.01 V increment
- vCCSA: Adjustable CPU System Agent voltage at 0.001 V increment
- vDRAM Bus: 110-step Memory voltage control
- vPCH: 176-step Chipset voltage control
SFS (Stepless Frequency Selection)
- BCLK/PCIE frequency tuning from 80 MHz to 300 MHz at 0.1
MHz increment.
Overclocking Protection
- ASUS C.P.R. (CPU Parameter Recall)
1 x BIOS Flashback button
1 x ASUS Wi-Fi GO! module (Wi-Fi 802.11 a/b/g/n/ac and Bluetooth v 4.0)
1 x Optical S/PDIF Out port
2 x LAN (RJ45) ports (2 x Intel ® LAN)
10 x USB 3.0/2.0 ports (blue)
2 x USB 2.0/1.1 ports (bottom port supports USB BIOS Flashback)
8-channel Audio I/O ports
(continued on the next page)
X99-DELUXE specifications summary
Internal I/O connectors
BIOS features
Manageability
Support DVD contents
Operating system support
Form factor
2 x 19-pin USB 3.0/2.0 connectors support additional 4 USB ports
2 x USB 2.0/1.1 connectors support additional 4 USB ports
1 x M.2 Socket 3 with vertical M Key design, type 2242/2260/2280 storage devices support (PCIe mode only)
2 x SATA Express connectors (gray)
8 x SATA 6 Gb/s connectors (4 x gray, 4 x black)
1 x 4-pin CPU Fan connector for both 3-pin (DC mode) and 4-pin
(PWM mode) CPU coolers control with auto-detection support
1 x 4-pin CPU Optional Fan connector (CPU_OPT)
4 x 4-pin Chassis Fan connectors for 3-pin (DC mode) and 4-pin
(PWM mode) coolers control
1 x Front panel audio connector (AAFP)
1 x S/PDIF out header
1 x 5-pin Thunderbolt header for ThunderboltEX II series support
1 x TPM connector
1 x 24-pin EATX Power connector
1 x 8-pin EATX 12V Power connector
1 x System Panel (Q-Connector)
1 x 5-pin EXT_FAN (Extension Fan) connector
1 x 3-pin CHASSIS (Chassis intrusion) connector
1 x MemOK! button
1 x Clear CMOS button
1 x EPU switch
1 x TPU switch (with advanced two-stage adjustments)
1 x EZ XMP switch
1 x SLI/CFX switch (2/3-Way adjustments)
1 x Power-on switch
1 x Reset switch
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.7, WfM 2.0,
SM BIOS 2.7, ACPI 5.0, Multi-language BIOS, ASUS EZ Flash
2, CrashFree BIOS 3, F11 EZ Tuning Wizard, F6 Qfan Control,
F3 My Favorites, Quick Note, Last Modified Log, F12 PrintScreen function, F3 Shortcut function, and ASUS DRAM SPD (Serial
Presence Detect) memory information
WfM 2.0, DMI 2.7, WOL by PME, PXE
Drivers
ASUS Utilities
EZ Update
Anti-virus software (OEM version)
Windows ® 8.1 / Windows ® 8 / Windows ® 7
ATX form factor: 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
Specifications are subject to change without notice.
xiii
xiv
Package contents
Check your motherboard package for the following items
8 x Serial ATA 6 Gb/s cables
ASUS X99-DELUXE motherboard
1 x ASUS Q-Shield
1 x 2-in-1 ASUS Q-Connector kit
1 x 2-WAY/3-WAY SLI card
Support DVD
1 x 3T3R dual-band Wi-Fi moving antennas
(Wi-Fi 802.11a/b/g/n/ac compliant)
HYPER M.2 x 4 (optional)
1 x Thermistor cable
FAN EXTENSION CARD
(optional)
User Manual
5-pin Fan extension cable
(optional)
M.2 Racket
User Guide
• If any of the above items is damaged or missing, contact your retailer.
• The illustrated items above are for reference only. Actual product specifications may vary with different models.
Installation tools and components
Intel ® LGA2011-v3 compatible CPU Fan
Intel ® LGA2011-v3 CPU
PC chassis
SATA hard disk drive Philips (cross) screwdriver
DIMM
Power supply unit
1 bag of screws
SATA optical disc drive (optional)
Graphics card
The tools and components in the table above are not included in the motherboard package.
xv
xvi
Chapter 1: Product Introduction
Product introduction
1.1 Special features
1
1.1.1 Product highlights
LGA2011-v3 socket for Intel
®
Core™ i7 processors
This motherboard supports Intel ® Core™ i7 processors in the LGA2011-v3 package. It provides great graphics and system performance with its GPU, quad-channel DDR4 memory slots and PCI Express 2.0/3.0 expansion slots.
Intel
®
X99 Express Chipset
Intel ® X99 Express Chipset is a single chipset that supports the LGA2011-v3 socket for Intel ®
Core™ i7 processors. It utilizes the serial point-to-point links, which increases bandwidth and enhances the system’s performance. It natively supports up to eight (8) USB 3.0 ports, fourteen (14) SATA 6 Gb/s ports, and M.2 support for faster data retrieval. It also enables the iGPU function for Intel ® integrated graphics performance.
PCI Express
®
3.0
PCI Express ® 3.0 (PCIe 3.0) is the PCI Express bus standard that provides twice the performance and speed of PCIe 2.0. It provides an optimal graphics performance, unprecedented data speed and seamless transition with its complete backward compatibility to PCIe 1.0/2.0 devices.
3-WAY/Quad-GPU SLI and 3-WAY CrossFireX™ Support
This motherboad features NVIDIA 3-WAY/Quad SLI and 3-Way AMD CrossfireX support that enables mulit-GPU setup, giving you the full power of the latest graphics technologies. It also features native support for 4K/UHD (ultra high definition) resolution of up to 4096 x 2160 via
HDMI or DisplayPort, resulting to four times the number of pixels for incredible visual clarity, detail, and realism.
SATA Express support
SATA Express provides faster data transfer speeds of up to 10 Gb/s, allowing your system to catch up with the speed of the SSDs. It also features backward compatibility with up to two
SATA drives of the same speed.
ASUS X99-DELUXE Series 1-1
1-2
Quad-Channel DDR4 2800 MHz Support
The motherboard supports the quad-channel DDR4 memory that features data transfer rates of DDR4 2800 MHz to boost the system’s performance, and to meet the higher bandwidth requirements of 3D graphics, multimedia and Internet applications.
Dual PCIe 3.0 x4 M.2 Support
With a 4x PCI Express 3.0/2.0 bandwidth, the M.2 can support up to 32 Gbit/s of data tranfer speed. It is a perfect choice for the operating system or application drive, making your system and its installed apps work in a faster pace.
Complete USB 3.0 integration
This motherboard offers you the strategic USB 3.0 accessibility for both the front and rear panels, allowing you to experience the convenience of the latest plug and play connectivity solution at speed up to ten times faster than USB 2.0.
1.1.2 Other special features
DTS Connect
To get the most out of your audio entertainment across all formats and quality levels, DTS
Connect combines two enabling technologies, DTS Neo:PC™ upmixes stereo sources (CDs,
MP3s, WMAs, internet radio) into as many as 7.1 channels of incredible surround sound.
Consumers can connect their PC to a home theater system. DTS Interactive is capable of performing mult-channel encoding of DTS bitstreams on personal computers, and sending encoded bitstreams out of a digital audio connection (such as S/PDIF or HDMI) designed to deliver audio to an external decoder.
DTS UltraPC II
DTS UltraPC II delivers a superior surround sound experience through your system’s speakers and headphones while monitoring and balancing the loudness level difference between digital audio formats. It also ehnances the audio settings through augmenting low and high frequencies of musical tones, restores compressed or re-mastered sounds, improves bass performance even without a subwoofer, and improves dialogues derived from
DVD or Blu-ray Disc™.
ErP Ready
The motherboard is European Union’s Energy-related Products (ErP) ready, and ErP requires products to meet certain energy efficiency requirement in regards to energy consumptions. This is in line with ASUS vision of creating environment-friendly and energyefficient products through product design and innovation to reduce carbon footprint of the product and thus mitigate environmental impacts.
Chapter 1: Product introduction
1.2 Motherboard overview
1.2.1 Before you proceed
Take note of the following precautions before you install motherboard components or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
• Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
ASUS X99-DELUXE Series 1-3
1.2.2 Motherboard layout
1-4
Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors.
Chapter 1: Product introduction
Layout contents
Connectors/Jumpers/Buttons and switches/Slots
1. DDR4 DIMM slots
2. CPU, CPU optional, extension, and chassis fan connectors
(4-pin CPU_FAN, 4-pin CPU_OPT, 5-pin EXT_FAN, 4-pin CHA_FAN1-4 )
3. LGA2011-v3 CPU socket
4. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
5. MemOK! button
6. M.2 Socket 3
7. EPU switch
8. Intel ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA 6G_34,
SATA 6G_56/SATAEXPRESS_1, SATA 6G_78, SATA6G_910)
9. ASMedia ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_E12/
SATAEXPRESS_E1)
10. TPU switch
11. Thunderbolt header (5-pin TB_HEADER)
12. CPU Over Voltage jumper (3-pin CPU_OV)
13. System panel connector (20-8 pin PANEL)
14. DirectKey connector (2-pin DRCT)
15. USB 2.0 connectors (10-1 pin USB1112; USB1314)
16. EZ XMP switch
17. USB 3.0 connectors (20-1 pin USB3_12, USB3_34)
18. SLI/CFX switch
19. TPM connector (20-1 pin TPM)
20. Clear CMOS button (CLR_CMOS)
21. Q-Code LEDs
22. Reset button
23. Power-on button
24. Front panel audio connector (10-1 pin AAFP)
25. Digital audio connector (4-1 pin SPDIF_OUT)
26. Chassis intrusion connector (4-1 pin CHASSIS)
Page
1-7
1-32
1-6
1-33
1-16
1-36
1-18
1-28
1-27
1-19
1-35
1-19
1-23
1-15
1-15
1-17
1-36
1-20
1-34
1-35
1-31
1-20
1-30
1-29
1-29
1-37
ASUS X99-DELUXE Series 1-5
1.2.3 Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA2011-v3 socket designed for Intel ® i7 processors.
Core™
1-6
• Ensure that all power cables are unplugged before installing the CPU.
• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.
• Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA2011-v3 socket.
• The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.
Chapter 1: Product introduction
1.2.4 System memory
The motherboard comes with eight DDR 4 (Double Data Rate 4) Quad Inline Memory
Modules (DIMM) slots.
A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot.
Recommended memory configurations
ASUS X99-DELUXE Series 1-7
1-8
Memory configurations
You may install 2 GB, 4 GB and 8 GB unbuffered and non-ECC DDR4 DIMMs into the DIMM sockets.
• You may install varying memory sizes in Channel A, Channel B, Channel C, and
Channel D. The system maps the total size of the lower-sized channel for the quadchannel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
• According to Intel ® the CPU.
CPU spec, DIMM voltage below 1.65 V is recommended to protect
• Due to the memory address limitation on 32-bit Windows ® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: a) Use a maximum of 3GB system memory if you are using a 32-bit Windows ® OS.
b) Install a 64-bit Windows ® motherboard.
OS when you want to install 4 GB or more on the c) For more details, refer to the Microsoft ® support site at http://support.microsoft.
com/kb/929605/en-us.
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory frequency adjustment.
• For system stability, use a more efficient memory cooling system to support a full memory load (8 DIMMs) or overclocking condition.
• Memory modules with memory frequency higher than 2133MHz and their corresponding timing or the loaded XMP profile is not the JEDEC memory standard.
The stability and compatibility of the memory modules depend on the CPU’s capabilities and other installed devices.
• Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory modules.
Chapter 1: Product introduction
X99-DELUXE Motherboard Qualified Vendors Lists (QVL)
DDR3 2800 MHz capability
Vendors Part No.
Size
A_DATA AX4U2800W8G17-DRZ 8GB
CORSAIR CMD16GX4M4A2800C16
CORSAIR CMD32GX4M4A2800C16
CORSAIR CMD64GX4M8A2800C16
CORSAIR CMD16GX4M4A2800C15
CORSAIR CMD32GX4M4A2800C15
CORSAIR CMK16GX4M4A2800C16
CORSAIR CMK32GX4M4A2800C16
CORSAIR CMK64GX4M8A2800C16
16GB (4GBx4)
32GB (8GBx4)
64GB (8GBx8)
16GB (4GBx4)
32GB (8GBx4)
16GB (4GBx4)
32GB (8GBx4)
64GB (8GBx8)
CORSAIR CMK16GX4M4A2800C15R 16GB (4GBx4)
CORSAIR CMK32GX4M4A2800C15R 32GB (8GBx4)
DS
DS
SS
DS
DS
SS
DS
DS
SS
SS
DS
-
-
-
-
-
-
-
-
-
-
Hynix
SS/
DS
Chip
Brand
Chip
NO.
Timing
-
-
-
-
-
-
-
-
-
-
H5AN4G
8NMFR
17-18-18-36 1.2V
16-18-18-36 1.2V
16-18-18-36 1.2V
16-18-18-36 1.2V
15-17-17-36 1.2V
15-17-17-36 1.2V
16-18-18-36 1.2V
16-18-18-36 1.2V
16-18-18-36 1.2V
15-17-17-36 1.2V
15-17-17-36 1.2V
Voltage
•
•
•
•
•
•
•
•
•
•
•
2
DIMM socket support
(Optional)
6 8
•
4
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DDR3 2666 MHz capability
Vendors Part No.
Size
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CMD16GX4M4A2666C14
CMD32GX4M4A2666C14
CMK16GX4M4A2666C15
CMK32GX4M4A2666C15
16GB (4GBx4)
32GB (8GBx4)
16GB (4GBx4)
32GB (8GBx4)
CMK16GX4M4A2666C14R 16GB (4GBx4)
CMK32GX4M4A2666C14R 32GB (8GBx4)
SS
DS
SS
DS
SS
DS
SS/
DS
Chip
Brand
Chip
NO.
-
-
-
-
-
-
-
-
-
-
-
-
Timing
14-16-16-35
14-16-16-35
15-17-17-35
15-17-17-35
14-16-16-35
14-16-16-35
Voltage DIMM socket support
(Optional)
2 4 6 8
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
•
•
•
•
•
•
•
•
•
•
•
•
CORSAIR
CORSAIR
CORSAIR
CORSAIR panram panram panram panram
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
DDR3 2400 MHz capability
Vendors
A_DATA
Part No.
AX4U2400W8G16-DRZ
Size
8GB
CMD16GX4M4A2400C14
CMD32GX4M4A2400C14
CMD64GX4M8A2400C14
CMD16GX4M4A2400C13
16GB (4GBx4) SS
32GB (8GBx4) DS
64GB (8GBx8) DS
16GB (4GBx4) SS
CMD32GX4M4A2400C13 32GB (8GBx4) DS
CMK16GX4M4A2400C14B 16GB (4GBx4) SS
CMK16GX4M4A2400C14R 16GB (4GBx4) SS
CMK16GX4M4A2400C14 16GB (4GBx4) SS
CMK32GX4M4A2400C14
CMK64GX4M8A2400C14
32GB (8GBx4) DS
64GB (8GBx8) DS
CMK16GX4M4A2400C13R 16GB (4GBx4) SS
CMK32GX4M4A2400C13R 32GB (8GBx4) DS
PUD42400C154GNJK
PUD42400C158GNJK
PUD42400C154G2NJK
PUD42400C158G2NJK
4GB
8GB
8GB (4GBx2)
16GB (8GBx2)
SS
DS
SS
DS
SS/
DS
SS
Chip
Brand
Chip NO.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SK hynix H5AN4G
8NMFR
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Timing
16-16-16-39
14-16-16-31
14-16-16-31
14-16-16-31
13-15-15-31
13-15-15-31
14-16-16-31
14-16-16-31
14-16-16-31
14-16-16-31
14-16-16-31
13-15-15-31
13-15-15-31
15-15-15-36
15-15-15-36
15-15-15-36
15-15-15-36
Voltage DIMM socket support
(Optional)
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
•
4
•
•
6
•
•
8
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ASUS X99-DELUXE Series 1-9
1-10
A_DATA
A_DATA
A_DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Micron
Micron
Crucial
Crucial
Samsung
SK hynix
SK hynix
A_DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Kingston panram panram panram panram
SUPER
TALENT
MTA8ATF51264AZ-
2G1A1
MTA16ATF1G64AZ-
2G1A1
4GB
8GB
CT4G4DFS8
213.8FA1
CT8G4DFD8
213.16FA1
4GB
8GB
M378A5143DB0-CPB 4GB
4GB
CMK8GX4M2
A2133C15R
CMK16GX4M
4A2133C13B
CMK16GX4M
4A2133C13R
CMK16GX4M4
A2133C13
CMK32GX4M4
A2133C13
CMK64GX4M8
A2133C13
CMK16GX4M4
A2133C12R
CMK32GX4M4
A2133C12R
CMD16GX4M4
A2133C12
CMD32GX4M4
A2133C12
KVR21N15/8
HMA451U6MF
R8N-TF
HMA41GU6MF
R8N-TF
AX4U2133W4
G13-DRZ
AX4U2133W8
G13-DRZ
AX4U2133W4
G15-DRZ
AX4U2133W8
G15-DRZ
CMK8GX4M2
A2133C15
CMK16GX4M
2A2133C15
8GB
4GB
8GB
4GB
8GB
8GB
(4GBx2)
16GB
(8GBx2)
8GB
(4GBx2)
16GB
(4GBx4)
16GB
(4GBx4)
16GB
(4GBx4)
32GB
(8GBx4)
64GB
(8GBx8)
16GB
(4GBx4)
32GB
(8GBx4)
16GB
(4GBx4)
32GB
(8GBx4)
8GB
PUD42133C1
54GNJK
PUD42133C1
58GNJK
PUD42133C1
54G2NJK
PUD42133C1
58G2NJK
FBU2B008GM
4GB
8GB
8GB
(4GBx2)
16GB
(8GBx2)
8GB
DDR3 2133 MHz capability
Vendors Part No.
Size
DS
DS
DS
SS
-
-
-
-
-
-
DS
DS
SS
DS
SS
DS
DS
DS
SS
SS
SS
DS
SS
DS
SS
SS/
DS
DS
SS
SS
SS
DS
SS
SS
DS
SS
DS
Chip
Brand
Chip NO.
Timing
-
-
Micron
Micron
Micron
Micron
-
-
D9RGQ
D9RGQ
D9RGQ
D9RGQ
-
Samsung K4A4G08
5WD-BCPB
SK hynix H5AN4G8
NMFRTFC
SK hynix
SK hynix
H5AN4G8
NMFRTFC
H5AN4G8
NMFR
SK hynix
SK hynix
SK hynix
H5AN4G8
NMFR
H5AN4G8
NMFR
-
H5AN4G8
NMFR
15-15-15-37
15-15-15-37
15-15-15-37
15-15-15-37
15-15-15-37
15-15-15-37
15-15-15-37
13-13-13-36
13-13-13-36
15-15-15-37
15-15-15-37
15-15-15-36
15-15-15-36
15-15-15-36
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
1.2V
Voltage DIMM socket support
(Optional)
1.2V
•
2
•
4
•
6
•
8
1.2V
• • • •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
-
-
-
-
-
13-15-15-28
13-15-15-28
13-15-15-28
1.2V
1.2V
1.2V
•
•
•
•
•
•
-
-
-
-
-
-
13-15-15-28
13-15-15-28
12-14-14-27
12-14-14-27
1.2V
1.2V
1.2V
1.2V
-
-
12-14-14-27
12-14-14-27
1.2V
1.2V
-
-
-
SK hynix
-
-
-
H5AN4G8N
MFRTFC
15-15-15-37
15-15-15-36
15-15-15-36
15-15-15-36
1.2V
1.2V
1.2V
1.2V
-
15-15-15-36
15-15-15-36
1.2V
1.2V
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
Chapter 1: Product introduction
• Side(s): SS - Single-sided DS - Double-sided DIMM support:
Supports one (1) module inserted into any slot as Single-channel memory configuration. We suggest that you install the module into D1 slot.
Supports two (2) modules inserted into one pair of the dark gray slots or the black slots as one pair of quad-channel memory configuration. We suggest that you install the modules into slots B1 and D1 for better compatibility.
Supports four (4) modules inserted into both the dark gray slots and black slots as two pairs of quad-channel memory configuration. We suggest that you install the modules into slots A1, B1, C1, and D1 for better compatibility.
Supports six (6) modules inserted into four dark gray slots and two black slots as three pairs of quad-channel memory configuration. We suggest that you install the modules into slots A1, B1, B2, C1, D1, and D2 for better compatibility.
Supports eight (8) modules inserted into all slots as fully-loaded quad-channel memory configurations.
• The design of the DIMM fan may vary. Ensure that the DIMM fan fits to the motherboard.
• ASUS exclusively provides hyper DIMM support function.
• Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support.
• Visit the ASUS website for the latest QVL.
ASUS X99-DELUXE Series 1-11
1.2.5 Expansion slots
Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
1-12
Slot No.
1
2
3
4
5
6
40-LANE
PCIe 3.0/2.0 x16_1 slot
PCIe 2.0 x4_1 slot
PCIe 3.0/2.0 x16_2 slot
PCIe 3.0/2.0 x16_3 slot
PCIe 3.0/2.0 x16_4 slot
PCIe 3.0/2.0 x16_5 slot
Slot Description
28-LANE
PCIe 3.0/2.0 x16_1 slot
PCIe 2.0 x4_1 slot
PCIe 3.0/2.0 x16_2 slot
PCIe 2.0 x16_3 slot
PCIe 3.0/2.0 x16_4 slot
PCIe 2.0 x16_5 slot
If you install x8 or x16 devices to the PCIe 2.0 x4_1 slot, ensure to adjust its bandwidth in
BIOS. Refer to Chapter 3 for more information.
Chapter 1: Product introduction
40-LANE CPU
VGA configuration
Single VGA/
PCIe card
PCIe 3.0/2.0 x16_1
x16 (single
VGA recommended)
Dual VGA/PCIe cards x16
PCI Express 3.0 operating mode
PCIe 3.0/2.0 x16_2
PCIe 3.0/2.0 x16_3
PCIe 3.0/2.0 x16_4
N/A
x16 (single
VGA recommended)
N/A
N/A x16 N/A
Triple VGA/
PCIe cards x16 x8
N/A x8 x16
N/A
N/A x8
PCIe 3.0/2.0 x16_5
N/A
N/A x8
N/A
28-LANE CPU PCI Express 3.0 operating mode
VGA configuration PCIe 3.0/2.0 x16_1 PCIe 3.0/2.0 x16_2 PCIe 3.0/2.0 x16_4
Single VGA/PCIe card
Dual VGA/PCIe cards
Triple VGA/PCIe cards
x16 (single VGA recommended) x16 x8
N/A
N/A x8
N/A x8 x8
• We recommend that you provide sufficient power when running CrossFireX™ or SLI™ mode.
• Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment.
• For a higher performance of the 3-Way configuration using the 40-LANE CPU, adjust the bandwidth of the PCIe x16_5 slot to x8 mode in BIOS. Refer to Chapter 3 for more information.
ASUS X99-DELUXE Series 1-13
IRQ assignments for this motherboard
PCIe x16_1
A shared
B
–
C
–
D
–
E
–
F
–
G
–
H
–
PCIe x16_2
ASMedia Controller
(1042AE) shared –
PCIe x16_3
PCIe x16_4
PCIe x16_5
PCIe x4_1 shared – shared* – shared – – – shared – shared –
–
– shared*
–
–
–
–
–
–
–
–
–
–
–
–
–
SMBUS Controller
Wi-Fi/Bluetooth 4.0
– – shared –
– shared – –
–
–
–
–
–
–
–
–
Intel
Intel
Intel
Intel
Intel
®
®
®
®
®
SATA Controller 1 – shared –
SATA Controller 2 shared –
LAN1 (i218)
EHCI 1
EHCI 2
–
–
–
–
Intel ® LAN2 (i211AT) shared –
ASMedia SATA
Controller (106SE)
Intel ® xHCI shared
–
–
–
–
–
–
–
–
–
– shared –
– – –
–
–
–
–
– shared –
–
–
–
–
–
–
–
–
–
–
–
– shared
–
–
–
–
–
–
–
–
–
–
– shared
–
–
–
–
–
HD Audio – – – – – – shared –
–
–
–
–
– –
– shared
–
–
–
–
–
–
–
–
–
–
* For 28-LANE CPUs.
1-14 Chapter 1: Product introduction
1.2.6 Onboard buttons and switches
Onboard buttons and switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
1. Power-on button
The motherboard comes with a power-on button that allows you to power up or wake up the system. The button also lights up when the system is plugged to a power source indicating that you should shut down the system and unplug the power cable before removing or installing any motherboard component.
2. Reset button
Press the reset button to reboot the system.
ASUS X99-DELUXE Series 1-15
3. MemOK! button
Installing DIMMs that are not compatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! button lights continuously. Press and hold the MemOK! button until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful boot.
1-16
• Refer to section 1.2.8 Onboard LEDs for the exact location of the DRAM_LED.
• The DRAM_LED also lights up when the DIMM is not properly installed. Turn off the system and reinstall the DIMM before using the MemOK! function.
• The MemOK! button does not function under Windows ® OS environment.
• During the tuning process, the system loads and tests failsafe memory settings. It takes about 30 seconds for the system to test one set of failsafe settings. If the test fails, the system reboots and test the next set of failsafe settings. The blinking speed of the DRAM_LED increases, indicating different test processes.
• Due to memory tuning requirement, the system automatically reboots when each timing set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or at www.asus.com.
• If you turn off the computer and replace DIMMs during the tuning process, the system continues memory tuning after turning on the computer. To stop memory tuning, turn off the computer and unplug the power cord for about 5–10 seconds.
• If your system fails to boot up due to BIOS overclocking, press the MemOK! button to boot and load the BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings.
• We recommend that you download and update to the latest BIOS version from www.asus.com after using the MemOK! function.
Chapter 1: Product introduction
4. TPU switch
With its two-level adjustment functions, the TPU allows you to automatically adjusts the
CPU ratio and clock speed for an optimal system performance.
• Enable this switch when the system is powered off.
• When the TPU switch is set to Enabled (TPU_I: CPU Ratio Boost), the system automatically adjusts the CPU ratio for an enhanced performance.
• When the TPU switch is set to Enabled (TPU_II: CPU BCLK and Ratio Boost), the system automatically adjusts the base clock rate (BLCK) and the CPU ratio for a more enhanced performance.
• The TPU LED (TPU_LED) near the TPU switch lights up when the TPU switch is enabled. Refer to section 1.2.8 Onboard LEDs for the exact location of the TPU LED.
• If you enable this switch under Windows ® OS environment, the TPU function will be activated after the next system bootup.
• You may use the 5-Way Optimization and TPU feature in the AI Suite 3 application, adjust the BIOS setup program or enable the TPU switch at the same time. However, the system will use the last setting you have made.
ASUS X99-DELUXE Series 1-17
5. EPU switch
Enable this switch to automatically detect the current PC loadings and intelligently moderate the power consumption.
Enable this switch when the system is powered off.
• The EPU LED (OLED2) near the EPU switch lights up when the EPU switch is enabled. Refer to section 1.2.8 Onboard LEDs for the exact location of the EPU LED.
• If you enable this switch under Windows ® activated after the next system bootup.
OS environment, the EPU function will be
• You may change the EPU settings in the software application or BIOS setup program and enable the EPU function at the same time. However, the system will use the last setting you have made.
1-18 Chapter 1: Product introduction
6. Clear CMOS button (CLR_CMOS)
Press this button to clear the BIOS setup information only when the systems hangs due to overclocking.
7. SLI/CFX switch
This switch allows you to determine the slots for 2-WAY or 3-WAY graphics card installation. When enabled, the LEDs near the slots light up, telling you to install the graphics cards to the specific slots.
• The LEDs below the SLI/CFX switch light up when the SLI/CFX switch is enabled.
Refer to section 1.2.8 Onboard LEDs for the exact location of the SLI/CFX LEDs.
• When using a 40-LANE CPU, the lighted LED for 3-WAY changes after adjusting the bandwidth of the PCIe x16_5 slot in BIOS.
ASUS X99-DELUXE Series 1-19
8. EZ XMP switch
Enable this switch to overclock the installed DIMMs, allowing you to enhance the
DIMM’s speed and performance.
1.2.7 Jumpers
1. CPU Over Voltage jumper (3-pin CPU_OV)
The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2.
1-20 Chapter 1: Product introduction
1.2.8 Onboard LEDs
1. POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component’s LED stays lit up until the problem is solved.
2. TPU LED (TPU_LED)
The TPU LED lights up when the TPU switch is enabled.
ASUS X99-DELUXE Series 1-21
3. EPU LED (O2LED3)
The EPU LED lights up when the EPU switch is enabled.
4. EZ XMP LED (XLED1)
This LED lights up when you enable the EZ XMP switch.
1-22 Chapter 1: Product introduction
5. SLI/CFX LEDs
The SLI/CFX LEDs light up when SLI/CFX switch is enabled.
6. Q-Code LEDs
The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details.
ASUS X99-DELUXE Series 1-23
1-24
E0
E1
E2
E3
E4 – E7
E8
E9
EA
EB
EC – EF
F0
F1
54
55
56
57
58
59
5A
5B
5C – 5F
Q-Code table
Code
00
02
03
04
06
10
11 – 14
15 – 18
19 – 1C
2B – 2F
30
31
32 – 36
37 – 3A
3B – 3E
4F
50 – 53
Description
Not used microcode
CACHE_ENABLED
PCH initialization
CPU_EARLY_INIT
PEI Core is started
Pre-memory CPU initialization is started
Pre-memory System Agent initialization is started
Pre-memory PCH initialization is started
Memory initialization
Reserved for ASL (see ASL Status Codes section below)
Memory Installed
CPU post-memory initialization
Post-Memory System Agent initialization is started
Post-Memory PCH initialization is started
DXE IPL is started
Memory initialization error. Invalid memory type or incompatible memory speed
Unspecified memory initialization error
Memory not installed
Invalid CPU type or Speed
CPU mismatch
CPU self test failed or possible CPU cache error
CPU micro-code is not found or micro-code update is failed
Internal CPU error
Reset PPI is not available
Reserved for future AMI error codes
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
S3 Boot Script execution
Video repost
OS S3 wake vector call
Reserved for future AMI progress codes
S3 Resume Failed
S3 Resume PPI not Found
S3 Resume Boot Script Error
S3 OS Wake Error
Reserved for future AMI error codes
Recovery condition triggered by firmware (Auto recovery)
Recovery condition triggered by user (Forced recovery)
(continued on the next page)
Chapter 1: Product introduction
Code
F2
F3
F4
F5 – F7
F8
F9
FA
FB – FF
60
61
62
63 – 67
68
69
6A
6B – 6F
70
71
72
73 – 77
99
9A
9B
9C
95
96
97
98
91
92
93
94
78
79
7A – 7F
90
9D
9E – 9F
A0
Description
Recovery process started
Recovery firmware image is found
Recovery firmware image is loaded
Reserved for future AMI progress codes
Recovery PPI is not available
Recovery capsule is not found
Invalid recovery capsule
Reserved for future AMI error codes
DXE Core is started
NVRAM initialization
Installation of the PCH Runtime Services
CPU DXE initialization is started
PCI host bridge initialization
System Agent DXE initialization is started
System Agent DXE SMM initialization is started
System Agent DXE initialization (System Agent module specific)
PCH DXE initialization is started
PCH DXE SMM initialization is started
PCH devices initialization
PCH DXE Initialization (PCH module specific)
ACPI module initialization
CSM initialization
Reserved for future AMI DXE codes
Boot Device Selection (BDS) phase is started
Driver connecting is started
PCI Bus initialization is started
PCI Bus Hot Plug Controller Initialization
PCI Bus Enumeration
PCI Bus Request Resources
PCI Bus Assign Resources
Console Output devices connect
Console input devices connect
Super IO Initialization
USB initialization is started
USB Reset
USB Detect
USB Enable
Reserved for future AMI codes
IDE initialization is started
(continued on the next page)
ASUS X99-DELUXE Series 1-25
1-26
Code
AD
AE
AF
B0
A9
AA
AB
AC
B1
B2
B3
B4
A5
A6
A7
A8
A1
A2
A3
A4
D8
D9
DA
DB
DC
D4
D5
D6
D7
D0
D1
D2
D3
B5
B6
B7
B8– BF
Description
IDE Reset
IDE Detect
IDE Enable
SCSI initialization is started
SCSI Reset
SCSI Detect
SCSI Enable
Setup Verifying Password
Start of Setup
Reserved for ASL (see ASL Status Codes section below)
Setup Input Wait
Reserved for ASL (see ASL Status Codes section below)
Ready To Boot event
Legacy Boot event
Exit Boot Services event
Runtime Set Virtual Address MAP Begin
Runtime Set Virtual Address MAP End
Legacy Option ROM Initialization
System Reset
USB hot plug
PCI bus hot plug
Clean-up of NVRAM
Configuration Reset (reset of NVRAM settings)
Reserved for future AMI codes
CPU initialization error
System Agent initialization error
PCH initialization error
Some of the Architectural Protocols are not available
PCI resource allocation error. Out of Resources
No Space for Legacy Option ROM
No Console Output Devices are found
No Console Input Devices are found
Invalid password
Error loading Boot Option (LoadImage returned error)
Boot Option is failed (StartImage returned error)
Flash update is failed
Reset protocol is not available
Chapter 1: Product introduction
Code
03
04
05
30
40
AC
AA
ACPI/ASL Checkpoints (under OS)
Description
System is entering S3 sleep state
System is entering S4 sleep state
System is entering S5 sleep state
System is waking up from the S3 sleep state
System is waking up from the S4 sleep state
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
1.2.9 Internal connectors
1. ASMedia ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_E12/SATAEXPRESS_E1)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables.
• ASMedia storage controller can only support AHCI mode.
• These SATA ports are for data drives only.
• The SATAEXPRESS_E1 connector can support one SATA Express device or two
SATA devices.
ASUS X99-DELUXE Series 1-27
2. Intel ® X99 Serial ATA 6 Gb/s connectors (7-pin SATA6G_12, SATA6G_34,
SATA6G_56/SATAEXPRESS_1, SATA6G_78, SATA6G_910)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel ® Rapid Storage Technology through the onboard Intel ® X99 chipset.
1-28
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode] . Refer to section 3.6.3 PCH Storage Configuration for details.
• Before creating a RAID set, refer to the manual bundled in the motherboard support
DVD.
• The SATAEXPRESS_1 connector can support one SATA Express device or two
SATA devices.
• Due to chipset behavior, the SATA6G_78 and SATA6G_910 ports (black) do not support Intel ® Rapid Storage Technology and RAID configuration.
Chapter 1: Product introduction
3. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.
The S/PDIF module is purchased separately.
4. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
• We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.
• If you want to connect a high-definition or an AC’97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD] or [AC97].
ASUS X99-DELUXE Series 1-29
1-30
5. USB 3.0 connectors (20-1 pin USB3_12, USB3_34)
These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for
USB-chargeable devices, optimized power efficiency, and backward compatibility with
USB 2.0.
The USB 3.0 module is purchased separately.
• Ensure to install the related driver to fully use the USB 3.0 ports under Windows ® 7.
• The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the operating system’s setting.
• These USB 3.0 ports support native UASP transfer standard in Windows ®
Windows ® 8.1 and Turbo Mode when using USB 3.0 Boost feature.
8 /
Chapter 1: Product introduction
6. USB 2.0 connectors (10-1 pin USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to
48 Mb/s connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
The USB 2.0 module is purchased separately.
ASUS X99-DELUXE Series 1-31
7. CPU, CPU optional, and chassis fan connectors
(4-pin CPU_FAN; 4-pin CPU_OPT; 5-pin EXT_FAN, 4-pin CHA_FAN1-4)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
• DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
• Ensure that the CPU fan cable is securely installed to the CPU fan connector.
1-32
• The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
• The CPU_FAN, CHA_FAN, and EXT_FAN connectors support the ASUS FAN Xpert 3 feature on X99 platform.
• The EXT_FAN connector supports 2 of 5 thermal sensor sources.
• The CPU fan connector detects the type of CPU fan installed and automatically switches the control modes. To configure the CPU fan’s control mode, go to
Advanced Mode > Monitor > CPU Q-Fan Control item in BIOS.
• The chassis fan connectors support DC and PWM modes. To set these fans to DC or
PWM, go to Advanced Mode > Monitor > Chassis Fan 1/4 Q-Fan Control items in
BIOS.
• To install more fans, refer to section 2.1.8 Expansion card installation for details.
The FAN EXTENSION CARD is purchased separately.
Chapter 1: Product introduction
8. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W.
• DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug. Otherwise, the system will not boot.
• We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.
• If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability.
• If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
ASUS X99-DELUXE Series 1-33
9. System panel connector (20-8 pin PANEL)
This connector supports several chassis-mounted functions.
1-34
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HDD LED lights up or flashes when data is read from or written to the HDD.
• System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.
• ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the operating system settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
Chapter 1: Product introduction
10. TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certificates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity.
The TPM module is purchased separately.
11. DirectKey connector (2-pin DRCT)
This connector is for the chassis-mounted button that supports the DirectKey function.
Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard.
Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details.
ASUS X99-DELUXE Series 1-35
12. Thunderbolt header (5-pin TB_HEADER)
This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt
Technology, allowing you to connect up to six Thunderbolt-enabled devices and a
DisplayPort-enabled display in a daisy-chain configuration.
The add-on Thunderbolt I/O card and Thunderbolt cables are purchased separately.
13. M.2 socket 3
This socket allows you to install an M.2 (NGFF) SSD module.
1-36
• This socket supports M Key and type 2242/2260/2280 storage devices.
• The M.2 Socket 3 shares bandwidth with PCIe x16_5 slot. Refer to section 3.6.3 PCH
Storage Configuration of this user guide for more details.
The M.2 (NGFF) SSD module is purchased separately.
Chapter 1: Product introduction
14. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove the jumper caps and enable the related options in BIOS if you intend to use the chassis intrusion detection feature.
A message appears when you connect the sensor or switch at the first time or when you reconnect the sensor or switch to this connector. Reset the system to exit the message.
ASUS X99-DELUXE Series 1-37
1-38 Chapter 1: Product introduction
Chapter 2: Basic installation
Basic installation
2.1 Building your PC system
2
2.1.1 Motherboard installation
The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models.
1. Install the ASUS Q-Shield to the chassis rear I/O panel.
2. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel.
ASUS X99-DELUXE Series 2-1
3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis.
2-2
DO NOT overtighten the screws! Doing so can damage the motherboard.
Chapter 2: Basic installation
2.1.2 CPU installation
Please note the order in opening/ closing the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down.
ASUS X99-DELUXE Series 2-3
Triangle mark
Triangle mark
2-4 Chapter 2: Basic installation
2.1.3 CPU heatsink and fan assembly installation
Apply the Thermal Interface Material to the
CPU heatsink and CPU before you install the heatsink and fan, if necessary.
To install the CPU heatsink and fan assembly
ASUS X99-DELUXE Series 2-5
A
B
2.1.4 DIMM installation
2-6
To remove a DIMM
Chapter 2: Basic installation
2.1.5 ATX Power connection
OR OR
ASUS X99-DELUXE Series 2-7
2.1.6 SATA device connection
OR
OR
2-8 Chapter 2: Basic installation
2.1.7 Front I/O Connector
To install ASUS Q-Connector
HDD LED+
HDD LED-
HDD LED
PWR
Ground
Reset
Ground
POWER SW
RESET SW
To install USB 2.0 connector
HDD LED
To install front panel audio connector
AAFP
USB 2.0
To install USB 3.0 connector
USB 3.0
ASUS X99-DELUXE Series 2-9
2.1.8 Expansion Card installation
To install PCIe x16 cards
To install PCIe x1 cards
2-10 Chapter 2: Basic installation
To install HYPER M.2 x4 card
For a higher performance, do not install the HYPER M.2 X4 is when using a 28-LANE CPU.
The HYPER M.2 X 4 card and SSD card are purchased separately.
ASUS X99-DELUXE Series 2-11
To install FAN EXTENSION CARD
2-12
The illustrations in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models.
Chapter 2: Basic installation
2.1.9 Wi-Fi antenna installation
Installing the ASUS 3T3R dual band W-Fi antenna
Connect the bundled ASUS 3T3R dual band Wi-Fi antenna connector to the Wi-Fi ports at the back of the chassis.
IO Shield
BIOS
• Ensure that the ASUS 3T3R dual band Wi-Fi antenna is securely installed to the Wi-Fi ports.
• Ensure to install the Bluetooth driver before installing the Wi-Fi GO! software.
The illustration above is for reference only. The I/O port layout may vary with models, but the Wi-Fi antenna installation procedure is the same for all models.
ASUS X99-DELUXE Series 2-13
2.2 BIOS update utility
USB BIOS Flashback
USB BIOS Flashback allows you to easily update the BIOS without entering the existing
BIOS or operating system. Simply insert a USB storage device to the USB port (the USB port hole marked in green on the I/O shield) then press the USB BIOS Flashback button for three seconds to automatically update the BIOS.
To use USB BIOS Flashback:
1. Place the bundled support DVD to the optical drive and install the USB BIOS
Flashback Wizard. Follow the onscreen instructions to complete the installation.
2. Insert the USB storage device to the USB Flashback port.
• We recommend you to use a USB 2.0 storage device to save the latest BIOS version for better compatibility and stability.
• Refer to section 2.3.1 Rear I/O connection for the location of the USB port that supports USB BIOS Flashback.
3. Launch the USB BIOS Flashback Wizard to automatically download the latest BIOS version.
4. Shut down your computer.
5. press the BIOS Flashback button for three seconds until the Flashback LED blinks three times, indicating that the BIOS Flashback function is enabled.
2-14
BIOS Flashback button USB BIOS Flashback port
6. Wait until the light goes out, indicating that the BIOS updating process is completed.
For more BIOS update utilities in BIOS setup, refer to the section 3.11 Updating BIOS in
Chapter 3.
• Do not unplug portable disk, power system, or press the CLR_CMOS button while
BIOS update is ongoing, otherwise update will be interrupted. In case of interruption, please follow the steps again.
• If the light flashes for five seconds and turns into a solid light, this means that the BIOS Flashback is not operating properly. This may be caused by improper installation of the USB storage device and filename/file format error. If this scenario happens, please restart the system to turn off the light.
• Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service
Center.
Chapter 2: Basic installation
2.3 Motherboard rear and audio connections
2.3.1 Rear I/O connection
Rear panel connectors
1.
2.
3.
4.
Intel
Intel
®
®
LAN port (LAN2)**
LAN port (LAN1)**
USB 2.0 ports 5-6 (Bottom port supports USB BIOS Flashback)
USB BIOS Flashback button
7.
USB 3.0 ports E56 (Supports USB 3.0
Boost)
8.
USB 3.0 ports E34 (Supports USB 3.0
Boost)
9.
USB 3.0 ports E12 (Supports USB 3.0
Boost)
10. Wi-Fi 802.11 a/b/g/n/ac, Bluetooth
V4.0*
11. Optical S/PDIF Out port 5.
USB 3.0 ports E910 (Supports USB
3.0 Boost)
6.
USB 3.0 ports E78 (Supports USB
3.0 Boost)
12. Audio I/O ports***
*, ** and ***: Refer to the tables on the next page for Bluetooth/Wi-Fi module LEDs, LAN port LEDs, and audio port
definitions.
ASUS X99-DELUXE Series 2-15
2-16
• The plugged USB 3.0 device may run on xHCI mode or EHCI mode, depending on the operating system’s setting.
• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.
• Due to the design of the Intel ® 9 series chipset, all USB devices connected to the
USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility.
*Bluetooth and Wi-Fi module LED indications
Wi-Fi LED
Status
Off
Green
Bluetooth LED
Description Status Description
No link
Linked
Off
Blue
No link
Linked
Blinking Data activity
Wi-Fi
LED
Bluetooth
LED
Wi-Fi 802.11 a/b/g/n/ac,
Bluetooth v4.0
* The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such mark by ASUSTeK
Computer Inc. is under license. Other trademarks and trade names are those of their respective owners.
** LAN ports LED indications
Activity Link LED
Status Description
Off No link
Orange Linked
Orange (Blinking) Data activity
Orange (Blinking then steady)
Ready to wake up from S5 mode
Speed LED
Status Description
Off 10 Mbps connection
Orange 100 Mbps connection
Green 1 Gbps connection
ACT/LINK
LED
SPEED
LED
LAN port
You can disable the LAN controllers in BIOS. Due to hardware design, the LAN1 port’s
LEDs may continue to blink even when disabled.
Chapter 2: Basic installation
*** Audio 2, 4, 6, or 8-channel configuration
Port Headset
2-channel
Light Blue Line In
Lime Line Out
Pink
Orange
Black
Gray
Mic In
–
–
–
* For Windows ® 8.1 only
4-channel 6-channel 8-channel
Line In Line In Line In
Front Speaker Out Front Speaker Out Front Speaker Out
Mic In
–
Mic In
Center/Subwoofer
Mic In
Center/Subwoofer
Rear Speaker Out Rear Speaker Out Rear Speaker Out
– Side Speaker Out* Side Speaker Out
2.3.2 Audio I/O connections
Audio I/O ports
Connect to Headphone and Mic
Connect to Stereo Speakers
ASUS X99-DELUXE Series 2-17
Connect to 2.1 channel Speakers
Connect to 4.1 channel Speakers
Connect to 5.1 channel Speakers
2-18
If you are using Windows ® 8.1 platform, use only the light blue audio port for Side Speaker
Out in a 6-channel configuration.
Chapter 2: Basic installation
Connect to 7.1 channel Speakers
When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the gray port.
2.4 Starting up for the first time
1. After making all the connections, replace the system case cover.
2. Ensure that all switches are off.
3. Connect the power cord to the power connector at the back of the system chassis.
4. Connect the power cord to a power outlet that is equipped with a surge protector.
5. Turn on the devices in the following order: a. Monitor b. External SCSI devices (starting with the last device on the chain) c. System power
6. After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green after the system LED turns on.
The system then runs the power-on self tests (POST). While the tests are running, the
BIOS beeps (refer to the BIOS beep codes table) or additional messages appear on the screen. If you do not see anything within 30 seconds from the time you turned on the power, the system may have failed a power-on test. Check the jumper settings and connections or call your retailer for assistance.
ASUS X99-DELUXE Series 2-19
BIOS Beep
One short beep
Description
VGA detected
Quick boot set to disabled
No keyboard detected
No memory detected One continuous beep followed by two short beeps then a pause (repeated)
One continuous beep followed by three short beeps
One continuous beep followed by four short beeps
No VGA detected
Hardware component failure
7. At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the instructions in Chapter 3.
2.5 Turning off the computer
While the system is ON, press the power button for less than four seconds to put the system on sleep mode or soft-off mode, depending on the BIOS setting. Press the power switch for more than four seconds to let the system enter the soft-off mode regardless of the BIOS setting.
2-20 Chapter 2: Basic installation
Chapter 3: BIOS setup
BIOS setup
3.1 Knowing BIOS
3
The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.
BIOS (Basic Input and Output System) stores system hardware settings such as storage device configuration, overclocking settings, advanced power management, and boot device configuration that are needed for system startup in the motherboard CMOS. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance. DO NOT change the default BIOS settings except in the following circumstances:
• An error message appears on the screen during the system bootup and requests you to run the BIOS Setup.
• You have installed a new system component that requires further BIOS settings or update.
Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel.
When downloading or updating the BIOS file, rename it as X99-D.CAP for this motherboard.
ASUS X99-DELUXE Series 3-1
3-2
3.2 BIOS setup program
Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program.
Entering BIOS at startup
To enter BIOS Setup at startup, press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>, POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
•
•
Press <Ctrl>+<Alt>+<Delete> simultaneously.
Press the reset button on the system chassis.
• Press the power button to turn the system off then back on. Do this option only if you failed to enter BIOS Setup using the first two options.
After doing either of the three options, press <Delete> key to enter BIOS.
• The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen.
• Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program.
• If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized
Defaults item under the Exit menu or press hotkey <F5>. See section 3.10 Exit menu for details.
• If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section 1.2.6 Onboard buttons and switches for information on how to erase the RTC RAM via the Clear CMOS button.
• The BIOS setup program does not support the Bluetooth devices.
BIOS menu screen
The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode screen.
Chapter 3: BIOS setup
3.2.1 EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press <F7> hot key for the advanced BIOS settings.
The default screen for entering the BIOS setup program can be changed between EZ Mode or Advanced Mode. Refer to the Setup Mode item in section 3.8 Boot menu for details.
Displays the system properties of the selected mode.
Click < or > to switch EZ System Tuning modes
Displays the CPU/motherboard temperature,
CPU voltage output, CPU/chassis/power fan speed, and SATA information
Selects the display language of the BIOS setup program
Creates storage RAID and configures system overclocking
Enables or disables the SATA RAID mode for Intel Rapid Storage Technology
Displays the CPU Fan’s speed. Click the button to manually tune the fans
Loads optimized default settings
Shows the bootable devices
Saves the changes and resets the system
Displays the Advanced mode menus
Selects the boot device priority
The boot device options vary depending on the devices you installed to the system.
ASUS X99-DELUXE Series 3-3
3.2.2 Advanced Mode
The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations.
To switch from EZ Mode to Advanced Mode, click Advanced Mode or press F7 hotkey.
Menu bar
Language
Q-Fan control
MyFavorite
EZ Tuning Wizard
Quick Note
Hot Keys
3-4
Sub-menu item
Menu items
Item description Configuration fields Scroll bar Last modified settings
Goes back to EZ Mode
Displays the CPU/motherboard temperature,
CPU and memory voltage output
Chapter 3: BIOS setup
Menu bar
The menu bar on top of the screen has the following main items:
My Favorites For saving the frequently-used system settings and configuration.
Main For changing the basic system configuration
Ai Tweaker For changing the overclocking settings
Advanced For changing the advanced system settings
Monitor
Boot
Tool
Exit
For displaying the system temperature, power status, and changing the fan settings.
For changing the system boot configuration
For configuring options for special functions
For selecting the exit options and loading default settings
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items.
The other items (My Favorites, Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items.
Submenu items
A greater than sign (>) before each item on any menu screen means that the item has a submenu. To display the submenu, select the item and press <Enter>.
Language
This button above the menu bar contains the languages that you can select for your BIOS.
Click this button to select the the language that you want to display in your BIOS screen.
MyFavorites (F3)
This button above the menu bar shows all BIOS items in a Tree Map setup. Select frequentlyused BIOS settings and save it to MyFavorites menu.
Refer to section 3.3 My Favorites for more information.
Q-Fan Control (F6)
This button above the menu bar displays the current settings of your fans. Use this button to manually tweak the fans to your desired settings.
Refer to section 3.2.3 QFan Control for more information.
EZ Tuning Wizard (F11)
This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard’s SATA mode from AHCI to RAID mode.
Refer to section 3.2.4 EZ Tuning Wizard for more information.
ASUS X99-DELUXE Series 3-5
3-6
Quick Note (F9)
This button above the menu bar allows you to key in notes of the activities that you have done in BIOS.
• The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste.
• You can only use the alphanumeric characters to enter your notes.
Hot keys
This button above the menu bar contains the navigation keys for the BIOS setup program.
Use the navigation keys to select items in the menu and change the settings.
Scroll bar
A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the other items on the screen.
General help
At the top right corner of the menu screen is a brief description of the selected item. Use
<F12> key to capture the BIOS screen and save it to the removable storage device.
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can change the value of the field opposite the item. You cannot select an item that is not user-configurable.
A configurable field is highlighted when selected. To change the value of a field, select it and press <Enter> to display a list of options.
Last Modified button
This button shows the items that you last modified and saved in BIOS Setup.
Chapter 3: BIOS setup
3.2.3 QFan Control
The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.
Click to select a fan to be configured
Click to activate
PWM Mode
Click to activate DC Mode
Select a profile to apply to your fans
Click to apply the fan setting
Click to undo the changes
Click to go back to main menu
Select to manually configure your fans
ASUS X99-DELUXE Series 3-7
Configuring fans manually
Select Manual from the list of profiles to manually configure your fans’ operating speed.
3-8
Speed points
Click or tap to manually configure your fans
To configure your fans:
1. Select the fan that you want to configure and to view its current status.
2. Click and drag the speed points to adjust the fans’ operating speed.
3. Click Apply to save the changes then click Exit (ESC).
Chapter 3: BIOS setup
3.2.4 EZ Tuning Wizard
EZ Tuning Wizard allows you to overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can also easily set RAID in your system using this feature.
System OC setup RAID setup
Tuning your system settings
To tune your settings:
1. Press <F11> on your keyboard or click
EZ Tuning Wizard screen, then click Next.
from the BIOS screen to open
2. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next.
3. Select the CPU fan type (Box cooler, Tower cooler, or Water cooler) that you installed then click Next.
If you are not sure of the CPU fan type, click I’m not sure. The system automatically detects the CPU fan type.
4. Click Next then click Yes to confirm auto-tuning.
ASUS X99-DELUXE Series 3-9
3-10
Creating RAID
To create RAID:
1. Press <F11> on your keyboard or click
EZ Tuning Wizard screen.
2. Click RAID then click Next.
from the BIOS screen to open
• Ensure that your HDDs have no existing RAID volumes.
• Ensure to connect your HDDs to Intel ® SATA connectors.
3. Select the type of storage for your RAID Easy Backup or Super Speed, then click
Next .
a. For Easy Backup, click
Next then select from Easy
Backup (RAID1) or Easy
Backup (RAID10) .
You can only select Easy
Backup (RAID 10) if you connect four (4) HDDs.
b. For Easy Backup, click Next then select from Super
Speed (RAID0) or Super
Speed (RAID5) .
4. After selecting the type of RAID, click Next then click Yes to continue the RAID setup.
5. After the RAID setup is done, click Yes to exit the setup then click OK to reset your system.
Chapter 3: BIOS setup
3.3 My Favorites
MyFavorites is your personal space where you can easily save and access your favorite
BIOS items.
ASUS X99-DELUXE Series 3-11
3-12
Adding items to My Favorites
To add BIOS items:
1. Press <F3> on your keyboard or click
Setup Tree Map screen.
from the BIOS screen to open
2. On the Setup Tree Map screen, select the BIOS items that you want to save in
MyFavorites screen.
Main menu panel
Submenu panel
Selected shortcut items
3. Select an item from main menu panel, then click the submenu that you want to save as favorite from the submenu panel and tap or click or press <Enter> on your keyboard.
You cannot add the following items to My Favorite items:
• Items with submenu options
• User-managed items such as language and boot order
• Configuration items such as Memory SPD Information, system time and date.
4. Click Exit (ESC) or press <esc> key to close Setup Tree Map screen.
5. Go to My Favorites menu to view the saved BIOS items.
Chapter 3: BIOS setup
3.4 Main menu
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
Security
The Security menu items allow you to change the system security settings.
• If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC)
RAM to clear the BIOS password. See section 1.2.6 Onboard buttons and switches for information on how to erase the RTC RAM via the Clear CMOS button.
• The Administrator or User Password items on top of the screen show the default [Not
Installed] . After you set a password, these items show [Installed].
ASUS X99-DELUXE Series 3-13
3-14
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program.
To set an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
To change an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press
<Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an administrator password, but press <Enter> when prompted to create/confirm the password. After you clear the password, the Administrator Password item on top of the screen shows Not Installed.
User Password
If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press
<Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
Chapter 3: BIOS setup
3.5 Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction.
The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.
Scroll down to display other BIOS items.
Ai Overclock Tuner [Auto]
This item allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options:
[Auto]
[Manual]
Loads the optimal settings for the system.
Automatically optimizes the CPU ratio and BCLK frequency.
The following item appears only when you set the Ai Overclocking Tuner to [Manual].
CPU Strap [Auto]
This item allows you to select a strap close to your target BCLK (base clock) for an extreme overclocking, or leave it at [Auto] for the BIOS to upgrade.
Configuration options: [Auto] [100MHz] [125MHz] [166MHz] [250MHz]
ASUS X99-DELUXE Series 3-15
3-16
The following item appears only when you set the CPU Strap to [100MHz], [125MHz],
[167MHz] , or [250MHz].
Source Clock Tuner [Auto]
This item allows you to select the source clock based on the assigned CPU strap for a better overclocking capability.
Configuration options: [8Ohm dbl] [7Ohm dbl] [6Ohm dbl] [5Ohm dbl]
[4Ohm dbl] [3Ohm dbl] [2Ohm dbl]
PLL Selection [Auto]
This item is set to LC PLL by default for better stability. Select SB PLL when the BCLK
(base clock) frequency is far away from 100 MHz. This may affect the function of other devices that need precise clock jitters.
Configuration options: [Auto] [LC PLL] [SB PLL]
Filter PLL [Auto]
Set this item to high BCLK (base clock) mode when using a very high BCLK to improve overclocking capability.
Configuration options: [Auto] [Low BCLK mode] [High BCLK mode]
BCLK Frequency [Auto]
This item allows you to set the BCLK (base clock) frequency to enhance the system performance. Use the <+> or <-> to adjust the value. The values range from 80.0 MHz to 300.0 MHz.
We recommend you to set the value based on the CPU specification, as high BCLK frequencies may damage the CPU permanently.
Initial BCLK Frequency [Auto]
This item allows you to start overclocking the system from the initial BCLK (base clock) frequency to the assigned BCLK frequency. Use the <+> or <-> to adjust the value.
The value ranges depend on the value you set on BCLK Frequency.
ASUS MultiCore Enhancement [Auto]
[Auto]
[Disabled]
This item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings.
This item allows you to set to default core ratio settings.
CPU Core Ratio [Per Core]
This item allows you to set the CPU core ratio limit per core or synchronize automatically to all cores.
Configuration options: [Auto] [Sync All Cores] [Per Core]
The following item appears only when you set the CPU Core Ratio to [Per Core].
1-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1-Core Limit value that must be higher than or equal to the 2-Core
Ratio Limit.
Chapter 3: BIOS setup
2-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 2-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto].
3-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 3-Core Limit value that must be higher than or equal to the 4-Core
Ratio Limit.
If you assign a value for 3-Core Ratio Limit, do not set the 1-Core Ratio Limit and 2-Core
Ratio Limit to [Auto].
4-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 4-Core Limit value that must be higher than or equal to the 3-Core
Ratio Limit.
If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, and 3-Core Ratio to [Auto].
5-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 5-Core Limit value that must be higher than or equal to the 4-Core
Ratio Limit.
If you assign a value for 5-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, 3-Core Ratio, and 4-Core Ratio to [Auto].
6-Core Ratio Limit [Auto]
Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 6-Core Limit value that must be higher than or equal to the 4-Core
Ratio Limit.
If you assign a value for 6-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio
Limit, 3-Core Ratio, 4-Core Ratio, and 5-Core Ratio to [Auto].
Min. CPU Cache Ratio [Auto]
This item allows you to set the minimum possible ratio on the Uncore part of the processor.
Use the <+> or <-> keys to adjust the value. The values depend on the CPU installed.
Max. CPU Cache Ratio [Auto]
This item allows you to set the maximum possible ratio on the Uncore part of the processor.
Use the <+> or <-> keys to adjust the value. The values depend on the CPU installed.
ASUS X99-DELUXE Series 3-17
3-18
Internal PLL Overvoltage [Auto]
This item allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the extreme overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]
BCLK Frequency: DRAM Frequency Ratio [Auto]
This item allows you to set the base clock frequency of the DRAM frequency ratio.
[Auto] The DRAM ratio is set to its optimized settings.
[100:100]
[100:133]
The DRAM ratio is set to 100:100.
The DRAM ratio is set to 100:133.
DRAM Frequency [Auto]
This item allows you to set the memory operating frequency. The configurable options vary with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized setting.
Configuration options: [DDR3-800MHz] [DDR3-1066MHz] [DDR3-1333MHz] [DDR3-
1400MHz] [DDR3-1600MHz] [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-2000MHz] [DDR3-
2133MHz] [DDR3-2200MHz] [DDR3-2400MHz] [DDR3-2600MHz] [DDR3-2666MHz] [DDR3-
2800MHz] [DDR3-2933MHz] [DDR3-3000MHz] [DDR3-3200MHz] [DDR3-3400MHz]
OC Tuner [Keep Current Settings]
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage for an enhanced system performance. It also accelerates the CPU graphics performance to the extreme depending on the CPU graphics loading.
Configuration options: [Keep Current Settings] [Ratio First] [BCLK First]
Ensure that you installed an efficient CPU fan for CPU and graphics loading before selecting either [BCLK First] or [Ratio First]. To keep the current overclocking tuner status, select [Keep Current Settings].
EPU Power Saving Mode [Disabled]
The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best energy saving condition.
Configuration options: [Disabled] [Enabled]
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the <+> or <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this happens, revert to the default settings.
Chapter 3: BIOS setup
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM Command Rate [Auto]
Configuration options: [Auto] [Timing T1] – [Timing T3]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [7]
DRAM RAS# to RAS# Delay L [Auto]
Configuration options: [Auto] [1] – [7]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1] – [1023]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1] – [32767]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [1] – [15]
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM WRITE to READ Delay(tWTR_L) [Auto]
Configuration options: [Auto] [1] – [15]
DRAM CKE Minimum Pulse Width [Auto]
Configuration options: [Auto] [5] – [8]
DRAM CAS# Write Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM Write Latency [Auto]
Configuration options: [Auto] [1] – [31]
ASUS X99-DELUXE Series 3-19
3-20
Third Timings
TRRDR [Auto]
Configuration options: [Auto] [1] - [7]
TRRDD [Auto]
Configuration options: [Auto] [1] - [7]
TWWDR [Auto]
Configuration options: [Auto] [1] - [7]
TWWDD [Auto]
Configuration options: [Auto] [1] - [7]
TRWDR [Auto]
Configuration options: [Auto] [1] - [7]
TWRDR [Auto]
Configuration options: [Auto] [1] - [7]
TWRDD [Auto]
Configuration options: [Auto] [1] - [7]
TRWSR [Auto]
Configuration options: [Auto] [1] - [7]
TCCD [Auto]
Configuration options: [Auto] [1] - [7]
TUWRDR [Auto]
Configuration options: [Auto] [1] - [3]
TRWDR2 [Auto]
Configuration options: [Auto] [0] - [31]
TRWDD [Auto]
Configuration options: [Auto] [0] - [31]
TRWSR2 [Auto]
Configuration options: [Auto] [0] - [31]
TWRDD2 [Auto]
Configuration options: [Auto] [0] - [31]
TCCDWR [Auto]
Configuration options: [Auto] [0] - [7]
RTL IOL control
DRAM RTL INIT Value [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHA D0 R0) [Auto]
Configuration options: [Auto] [1] - [127]
Chapter 3: BIOS setup
DRAM RTL (CHA D0 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHA D1 R0) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHA D1 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHB D0 R0) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHB D0 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHB D1 R0) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHB D1 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHC D0 R0) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHC D0 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHC D1 R0) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHC D1 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHD D0 R0) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHD D0 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHD D1 R0) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM RTL (CHD D1 R1) [Auto]
Configuration options: [Auto] [1] - [127]
DRAM IO-L (CHA D0 R0) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHA D0 R1) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHA D1 R0) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHA D1 R1) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHB D0 R0) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHB D0 R1) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHB D1 R0) [Auto]
Configuration options: [Auto] [1] - [255]
ASUS X99-DELUXE Series 3-21
3-22
DRAM IO-L (CHB D1 R1) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHC D0 R0) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHC D0 R1) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHC D1 R0) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHC D1 R1) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHD D0 R0) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHD D0 R1) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHD D1 R0) [Auto]
Configuration options: [Auto] [1] - [255]
DRAM IO-L (CHD D1 R1) [Auto]
Configuration options: [Auto] [1] - [255]
IO control
MC Vref(CHA) [Auto]
Configuration options: [Auto] [50] - [99.911]
MC Vref(CHB) [Auto]
Configuration options: [Auto] [50] - [99.911]
MC Vref(CHC) [Auto]
Configuration options: [Auto] [50] - [99.911]
MC Vref(CHD) [Auto]
Configuration options: [Auto] [50] - [99.911]
DRAM Vref (CHA) [Auto]
Configuration options: [Auto] [60] - [99]
DRAM Vref (CHB) [Auto]
Configuration options: [Auto] [60] - [99]
DRAM Vref (CHC) [Auto]
Configuration options: [Auto] [60] - [99]
DRAM Vref (CHD) [Auto]
Configuration options: [Auto] [60] - [99]
CTL Vref (CHAB) Sign [+]
Configuration options: [+] [-]
CTL Vref (CHAB) [Auto]
Configuration options: [Auto] [0.00] - [0.20]
CTL Vref (CHCD) Sign [+]
Configuration options: [+] [-]
CTL Vref (CHCD) [Auto]
Configuration options: [Auto] [0.00] - [0.20]
Chapter 3: BIOS setup
Receiver DQ Pre-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Receiver DQ De-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Transmitter DQ Pre-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Receiver DQS Pre-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Receiver DQS De-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Transmitter DQS Pre-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Receiver CMD Pre-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Receiver CMD De-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Transmitter CMD Pre-emphasis [Auto]
Configuration options: [Auto] [0.90] - [1.60]
Receiver CLK Pre-emphasis [Auto]
Configuration options: [Auto] [1.00] - [2.00]
Receiver CLK De-emphasis [Auto]
Configuration options: [Auto] [1.00] - [2.00]
Transmitter CLK Pre-emphasis [Auto]
Configuration options: [Auto] [1.00] - [2.00]
Receiver CTL Pre-emphasis [Auto]
Configuration options: [Auto] [1.00] - [1.60]
Receiver CTL De-emphasis [Auto]
Configuration options: [Auto] [1.00] - [1.60]
Transmitter CTL Pre-emphasis [Auto]
Configuration options: [Auto] [1.00] - [1.60]
Receiver ODT Pre-emphasis [Auto]
Configuration options: [Auto] [1.00] - [1.60]
Transmitter ODT Pre-emphasis [Auto]
Configuration options: [Auto] [1.00] - [1.60]
MISC
DRAM Eventual Voltage (CHA/CHB/CHC/CHD) [Auto]
Use <+> or <-> to adjust the eventual voltages of the DIMM slots. The values range from 0.8 V to 1.9 V with a 0.10 increment.
DRAM CLK Period [Auto]
This item allows you to set a DRAM clock period.
Configuration options: [Auto] [1] – [19]
Memory optimize Control [Auto]
This item allows you to optimize the memory control.
Configuration options: [Auto] [Enabled] [Disabled]
ASUS X99-DELUXE Series 3-23
3-24
Enhanced Training (CHA/CHB/CHC/CHD) [Auto]
Configuration options: [Auto] [Enabled] [Disabled]
MemTest [Auto]
This item allows you to enable or disable the memory testing.
Configuration options: [Enabled] [Disabled]
Attempt Fast Boot [Auto]
This item allows the portion of the memory reference code to be skipped when possible to increase boot speed.
Configuration options: [Auto] [Enabled] [Disabled]
Attempt Fast Cold Boot [Auto]
This item allows the portion of the memory reference code to be skipped when possible to increase boot speed.
Configuration options: [Auto] [Enabled] [Disabled]
External Digi+ Power Control
CPU Input Boot Voltage [Auto]
This item allows you to set a higher CPU input boot voltage for better overclocking capability. Use the <+> or <-> to adjust the value. The values range from 0.80 V to 2.7
V with an interval of 10 V.
CPU Load-line Calibration [Auto]
Load-line is defined by Intel ® specification and affects CPU power voltage. The CPU working voltage decreases proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increases the CPU and VRM thermal conditions. Select from levels 1 to 9 to adjust the CPU power voltage from 0% to 125%.
Configuration options [Auto] [Level 1] - [Level 9]
The actual performance boost may vary depending on your CPU specification.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Current Capability [Auto]
This item provides a total power range for CPU overclocking. A higher value setting provides higher power consumption delivery and extends the overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
CPU VRM Switching Frequency [Auto]
This item affects the VRM transient response speed and the component thermal production. Select [Manual] to configure a higher frequency for a quicker transient response speed.
Configuration options: [Auto] [Manual]
Chapter 3: BIOS setup
DO NOT remove the thermal module. The thermal conditions should be monitored.
The following item appears only when you set the CPU VRM Switching Frequency to
[Manual] .
Fixed CPU VRM Switching Frequency (KHz) [300]
This item allows you to set a higher frequency for a quicker transient response speed. Use the <+> or <-> to adjust the value. The values range from 300 KHz to 500 KHz with an interval of 50 KHz.
VRM Spread Spectrum [Disabled]
This item allows to enhance the system stability.
Configuration options: [Disabled] [Enabled]
Active Frequency Mode [Disabled]
This item allows to enhance the power saving condition of your system.
Configuration options: [Disabled] [Enabled]
CPU Power Phase Control [Auto]
This item allows you to set the power phase control of the CPU.
Configuration options: [Auto] [Standard] [Optimized] [Extreme] [Power Phase
Response]
DO NOT remove the thermal module when setting this item to [Power Phase Response].
The thermal conditions should be monitored.
The following item appears only when you set the CPU Power Phase Control to [Power
Phase Response] .
Power Phase Response [Fast]
This item allows you to set a faster phase response for the CPU to increase system performance or to slower phase response to decrease DRAM power efficiency.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions of every phase component.
[T. Probe]
[Extreme]
Select to maintain the VRM thermal balance.
Select to maintain the current VRM balance.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Power Thermal Control [120]
A higher temperature brings a wider CPU power thermal range and extends the overclocking tolerance to enlarge the overclocking potential. Use the <+> or <-> keys to adjust the value. The values depend on the CPU installed.
ASUS X99-DELUXE Series 3-25
3-26
DO NOT remove the thermal module. The thermal conditions should be monitored.
DRAM AB/CD Current Capability [100%]
This item adjusts the total power range for DRAM overclocking. Set a higher value to provide a wider total power range and extends the overclocking frequency range simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM AB/CD Switching Frequency [Auto]
This item affects the overclocking range and system stability. Set this item to [Manual] to manually set a fixed DRAM switching frequency for an increased overclocking range or enhanced system stability.
The following item appears only when you set the DRAM Switching Frequency to [Manual].
Fixed DRAM Switching Frequency (KHz) [300]
This item allows you to set a higher frequency for an increased overclocking range or a lower frequency for an enhanced system stability.
Use the <+> or <-> to adjust the value. The values range from 300 KHz to
500 KHz with an interval of 50 KHz.
Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and their features.
Enhanced Intel SpeedStep Technology [Enabled]
This item allows the operating system to dynamically adjust the processor voltage and cores frequency which decreases the average power consumption the average heat production.
Configuration options: [Enabled] [Disabled]
Turbo Mode [Enabled]
This item allows you to enable your core processor’s speed to run faster than the base operating frequency when it is below operating power, current and temperature specification limit.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set the Turbo Mode to [Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the Turbo Ratio’s time duration that exceeds the TDP
(Thermal Design Power) for maximum performance. Use the <+> or <-> keys to adjust the value. The values range from 1 W t0 4096 W.
Package Power Time Window [Auto]
Also known as Power Limit 1, this item allows you to maintain the time window for Turbo Ratio over TDP (Thermal Design Power). Use the <+> or
<-> keys to adjust the value. The values range from 1 to 127 in seconds.
Chapter 3: BIOS setup
Short Duration Package Power Limit [Auto]
Also known as Power Limit 2, this item allows you to provide rapid protection when the package power exceeds the Power Limit 1. Use the
<+> or <-> keys to adjust the value. The values range from 1 W t0 4096 W.
CPU Integrated VR Current Limit [Auto]
Allows you to set a higher current limit to prevent frequency and power throttling when overclocking. Use the <+> or <-> keys to adjust the value.
The values range from 0.125 to 1023.875 with a 0.125 interval.
CPU Internal Power Fault Control
CPU Integrated VR Fault Management [Auto]
Disable this item to prevent tripping the Fully Integrated Voltage Regulator when doing over-voltage. We recommend you to disable this item when overclocking.
Configuration options: [Auto] [Disabled] [Enabled]
CPU Internal Power Configuration
CPU Integrated VR Efficiency Management [Auto]
This item allows you to improve the power rating when the CPU is in low power state, or make the FIVR (fully integrated voltage regulator work in high performance at all times.
Configuration options: [Auto] [High Performance] [Balanced]
Fully Manual Mode [Disabled]
Set this item to [Enabled] to support voltage control via ROG Connect and OC Panel.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set Fully Manual Mode item to [Enabled].
Max VCcore [Disabled]
This item allows you to make the CPU Core Voltage as close to CPU Input Voltage as possible.
Configuration options: [Enabled] [Disabled]
The following item appeara only when you set Max. Vcore item to [Enabled].
Max Cache Voltage [Disalbed]
This item allows the CPU Core Voltage as close to CPU Input Voltage as possible.
CPU Core Voltage [Auto]
This item allows you to configure the amount of Voltage fed to the CPU cores. Increase the voltage when configuring a high CPU core frequency.
Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]
ASUS X99-DELUXE Series 3-27
3-28
The following item appears only when you set the CPU Core Voltage to [Manual Mode].
CPU Core Voltage Override [Auto]
This item allows you to configure the CPU core voltage. Use<+> or <-> key to adjust the value. The values range from 0.001V to 1.920V at 0.001V increment.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[-] To offset the voltage by a negative value.
CPU Core Voltage Offset [Auto]
This item allows you to configure the CPU core voltage offset value.
Use<+> or <-> key to adjust the value. The values range from 0.001V to
0.999V at 0.001V increment.
The following items appear only when you set the CPU Core Voltage to [Adaptive Mode].
Additional Turbo Mode CPU Core Voltage [Auto]
This item allows you to set the amount of voltage fed to the CPU cores when running in turbo mode. Increase the voltage when configuring a high
CPU core frequency. The voltage you set is affected by the offset value.
Use the <+> or <-> keys to adjust the value. The values range from 0.001V to 1.920 V with a 0.001 V interval.
Total Adaptive Mode CPU Core Voltage [Auto]
This item sums up the voltages of the CPU Core Voltage offset and
Additional Turbo Mode CPU Core Voltage options.
CPU Cache Voltage [Auto]
This item allows you to configure the amount of voltage fed to the CPU uncores including it is cache. Increase the voltage when configuring a high CPU cache frequency.
Configuration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode]
The following item appears only when you set the CPU Cache Voltage to [Manual Mode].
CPU Cache Voltage Override [Auto]
This item allows you to configure the CPU cache voltage. Use<+> or <-> key to adjust the value. The values range from 0.001V to 1.920V at 0.001V increment.
The following items appear only when you set the CPU Core Voltage to [Offset Mode].
Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[-] To offset the voltage by a negative value.
Chapter 3: BIOS setup
CPU Cache Voltage Offset [Auto]
This item allows you to configure the CPU cache voltage offset value.
Use<+> or <-> key to adjust the value. The values range from 0.001V to
0.999V at 0.001V increment.
The following items appear only when you set the CPU Core Voltage to [Adaptive Mode].
Additional Turbo Mode CPU Cache Voltage [Auto]
This item allows you to set the amount of voltage fed to the CPU cores when running in turbo mode. Increase the voltage when configuring a high
CPU core frequency. The voltage you set is affected by the offset value.
Use the <+> or <-> keys to adjust the value. The values range from 0.001V to 1.920 V with a 0.001 V interval.
Total Adaptive Mode CPU Cache Voltage [Auto]
This item sums up the voltages of the CPU Cache Voltage offset and
Additional Turbo Mode CPU Cache Voltage options.
CPU System Agent Voltage Offset Mode Sign [+]
[+]
[-]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
CPU System Agent Voltage Offset [Auto]
This item allows you to set the amount of voltage fed to the system agent of the processor including its PCIE controller and power control unit (PCU). Setting a high system agent voltage may enhance the overclocking capability.Use the <+> or <-> key to adjust the value. The values range from 0.001V to 0.999V at 0.001V increment.
CPU Graphics Voltage [Auto]
This item allows you to configure the amount of voltage fed to the CPU graphics.
Increase the voltage when configuring a high CPU graphics frequency. Use the <+> or
<-> key to adjust the value. The values range from 0.8V to 1.920V at 0.01V increment.
CPU System Agent Voltage [Auto]
This item allows you to configure the amount of voltage fed to the system agent of the
CPU including the PCI-E controller and the PCU (power control unit). Configure a high system agent voltage to enhance the overclocking capability. Use the <+> or <-> key to adjust the value. The values range from 0.85V to 2.20V at 0.003125V increment.
CPU Analog I/O Voltage [Auto]
This item allows you to configure the amount of voltage fed to the analog portion of the I/O on the CPU. Configure a high analog I/O voltage to enhance the overclocking capability. Use the <+> or <-> key to adjust the value. The values range from 1.0V to
2.20V at 0.003125V increment.
CPU Digital I/O Voltage [Auto]
This item allows you to configure the amount of voltage fed to the digital portion of the I/O on the CPU. Configure a high digital I/O voltage to enhance the overclocking capability. Use the <+> or <-> key to adjust the value. The values range from 1.0V to
2.20V at 0.003125V increment.
ASUS X99-DELUXE Series 3-29
3-30
CPU SVID Support [Auto]
Set this item to [Enabled] when overclocking. Disabling this item prevents the CPU from communicating with the external voltage regulator.
Configuration options: [Auto] [Disabled] [Enabled]
The following items appear only when you set the CPU Core Voltage to [Auto] or
[Disabled] .
SVID Voltage Override[Auto]
This item allows you to set a VCCIN for the CPU during initial part of POST. Use the
<+> or <-> key to adjust the value. The values range from 0.001 V to 2.440V at 0.001V increment.
SVID VDDQ Voltage Override [Auto]
This item allows you to set a VCCIN for the CPU before OS loading. Use the <+> or <-> key to adjust the value. The values range from 0.001V to 2.440V at 0.001V increment.
DRAM SVID Support [Auto]
Set this item to [Disabled] to stop the CPU from communicating with the external voltage regulator. Disable this item when you overclock your system.
Configuration options: [Auto] [Disabled] [Enabled]
DRAM Voltage (CHA/CHB, CHC/CHD) [Auto]
This item allows you to set the voltage for the system memory. Use the <+> or <-> key to adjust the value. The values range from 0.80V to 1.90V at 0.010V increment.
According to Intel ® CPU specifications, DIMMs with voltage requirement over 1.65 V may damage the CPU permanently. We recommend that you install the DIMMs with the voltage requirement below 1.65 V.
PCH Core Voltage [Auto]
This item allows you to configure the core voltage for the PCH (platform controller hub). Use the <+> or <-> key to adjust the value. The values range from 0.70V to 1.80V at 0.00635V increment.
PCH I/O Voltage [Auto]
This item allows you to configure the I/O voltage for the PCH (platform controller hub). Use the <+> or <-> key to adjust the value. The values range from 1.20V to 2.20V at 0.00635V increment.
VCCIO CPU 1.05V Voltage [Auto]
This item allows you to set the main power supply for the CPU REF. Use the <+> or <-> key to adjust the value. The values range from 0.7000V to 1.8000V at 0.00625V increment.
Chapter 3: BIOS setup
VCCIO PCH 1.05V Voltage [Auto]
This item allows you to set the tmain power supply for the PCH REF. Use the <+> or <-> key to adjust the value. The values range from 0.2000V to 1.0000V at 0.00625V increment.
VTTDR Voltage (CHA/CHB) [Auto]
This item allows you to set the termination voltage for the DRAM on the left. Use the <+> or <-> key to adjust the value. The values range from 0.2000V to 1.0000V at 0.00625V increment.
VTTDR Voltage (CHC/CHD) [Auto]
This item allows you to set the termination voltage for the DRAM on the left. Use the <+> or <-> key to adjust the value. The values range from 0.2000V to 1.0000V at 0.00625V increment.
PLL Termination Voltage [Auto]
This item allows you to terminate the PLL Voltage. You can use the <+> or <-> keys to adjust the value. The values range from 0.20000V to 3.098278 V with a 0.006602 V interval.
PLL Reference Offset Mode Sign [+]
[+]
[–]
To offset the voltage by a positive value.
To offset the voltage by a negative value.
PLL Reference Offset Value [Auto]
This item allows you to configure the PLL reference value. You can use the <+> or <-> keys to adjust the value.
Configuration options: [Auto] [1] - [20]
CPU Spread Spectrum [Auto]
This item allows you to enhance the BCLK overclocking capability or reduce the EMI
(electromagnetic disturbance) generated by the BCLK. Set this item to [Enabled] for EMI reduction, or set this item to [Disabled] to enhance BCLK overclocking.
Configuration options: [Auto] [Disabled] [Enabled]
ASUS X99-DELUXE Series 3-31
3.6 Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.
3-32 Chapter 3: BIOS setup
3.6.1 CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically detects.
The items in this menu may vary based on the CPU installed.
Hyper-Threading [ALL] [Enabled]
This item allows you to enable/disable the Hyper-Threading for logical processor threads.
Configuration options: [Enabled] [Disabled]
Intel Adaptive Thermal Monitor [Enabled]
This item allows you to protect the CPU by decreasing its frequency as it reaches the thermal throttle point. The thermal monitor includes TM1 (Thermal monitor 1), TM2 (Thermal monitor
2), and EMTTM (Enhanced Multi-threaded Thermal Monitoring).
Configuration options: [Disabled] [Enabled]
Limit CPUID Maximum [Disabled]
When set to [Enabled], this item allows the legacy OS to boot even without support for CPUs with extended CPUID functions.
Configuration options: [Disabled] [Enabled]
Execute Disable Bit [Enabled]
Execute Disable prevents certain classes of malicious buffer overflow attacks when combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3).
Configuration options: [Disabled] [Enabled]
ASUS X99-DELUXE Series 3-33
3-34
Intel Virtualization Technology [Disabled]
When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by
Vanderpool Technology.
Configuration options: [Disabled] [Enabled]
Hardware Prefetcher [Enabled]
This item allows the CPU to prefetch commands and data in the L2 cache, reduces the
DRAM loading time and improves the system performance.
Configuration options: [Disabled] [Enabled]
Adjacent Cache Line Prefetcher [Enabled]
This item allows the mid level cache (L2) to prefetch adjacent cache lines, reducing the
DRAM loading time and improves the system performance.
Configuration options: [Disabled] [Enabled]
Boot Performance Mode [Max Performance]
This item allows you to select the CPU performance state during system boot before the operating system takes control. The CPU runs at a selected performance ratio based on CPU configuration.
Configuration options: [Max Non-Turbo Performance] [Max Battery] [Turbo Performance]
Active Processor Cores
The items in this menu allow you to enable/disable the cores of your CPU.
Active Processor Core (0-5) [Enabled]
Configuration options: [Enabled] [Disabled]
CPU Power Management Configuration
This item allows you to manage and configure the CPU’s power.
Enhanced Intel SpeedStep Technology [Enabled]
This item allows your system to adjust the CPU’s voltage and cores frequency, resulting in decreased power consumption and heat production.
[Disabled] The CPU runs at its default speed.
[Enabled] The system controls the CPU speed.
Turbo Mode [Enabled]
This item allows you to automatically set the CPU cores to run faster than the base operating frequency when it is below the operating power, current and temperature specification limit.
Configuration options: [Enabled] [Disabled]
CPU states [Auto]
This item allows you to set the power saving of the CPU states.
Configuration options: [Auto] [Disabled] [Enabled]
Chapter 3: BIOS setup
The following items appear only when you set the CPU states to [Enabled].
Enhanced C1 state [Enabled]
This item allows your CPU to reduce power consumption when the system is in idle mode.
Configuration options: [Enabled] [Disabled]
CPU C3 Report [Enabled]
This item allows you to disable or enable the CPU C3 report to the operating system.
Configuration options: [Enabled] [Disabled]
CPU C6 Report [Enabled]
This item allows you to disable or enable the CPU C6 report to the operating system.
Configuration options: [Enabled] [Disabled]
Package C State Support [Auto]
This item allows you to set the a C-state support for the CPU package.
Configuration options: [Auto] [Enabled] [C0/C1] [C2] [C3] [C6] [CPU C7]
[CPU C7s]
3.6.2 PCH Configuration
PCI Express Configuration
This item allows you to configure the PCI Express slots.
PCIe Speed [Auto]
This item allows your system to automatically select the PCI Express port speed. When set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port runs at PCI-E 2.0 speed.
Configuration options: [Auto] [Gen1] [Gen2]
ASUS X99-DELUXE Series 3-35
3.6.3 PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port.
Scroll down to display the other BIOS items.
3-36
SATAExpress_1 SRIS Support [Auto]
When set to [Auto], this item allows the system to automatically adjust the SRIS (Separate
Reference Clock Independent Spread Spectrum Clocking Architecture) support for connected
SATA Express devices. Set this item to [Disabled] to activate ASUS RUNWAY SATA
Express bridge card
Configuration options: [Auto] [Disabled]
S.M.A.R.T. Status Check [On]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks.
Configuration options: [On] [Off]
Chapter 3: BIOS setup
SATA Controller 1 Mode Selection [AHCI]
This item allows you to set the SATA configuration.
[Disabled] Disables the SATA function.
[IDE Mode] Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI Mode] Set to [AHCI Mode] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.
[RAID Mode] Set to [RAID Mode] when you want to create a RAID configuration from the
SATA hard disk drives.
The following item appears only when you set the SATA Mode Selection to [IDE].
SATA6G_1-6 (Gray)
These items display all connected devices to SATA6G ports. If some ports are not used, these items show [Not Installed].
SATA Controller 2 Mode Selection [AHCI]
This item allows you to set the SATA configuration.
[Disabled]
[IDE Mode]
Disables the SATA function.
Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI Mode] Set to [AHCI Mode] when you want the SATA hard disk drives to use the
AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.
Due to Intel ® chipset specification, the SATA ports from controller 2 does not support Intel ®
Rapid Storage Technology including RAID configuration.
The following item appears only when you set the SATA Mode Selection to [IDE].
SATA6G_7-10 (Black)
These items display all connected devices to SATA6G ports. If some ports are not used, these items show [Not Installed].
Support Aggressive Link Power Management [Disabled]
This item is designed for LPM (link power management) support with a better energy saving conditions. When disabled, the hot plug function of SATA ports are disabled.
Configuration options: [Disabled] [Enabled]
Hot Plug [Disabled] (SATA6G_1-6 (Gray) / SATA6G_7-10 (Black))
These items allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
ASUS X99-DELUXE Series 3-37
3.6.4 System Agent Configuration
3-38
NB PCI-E Configuration
The items in this menu allow you to select the operating speeds of the PCIe slots.
PCIEX16_1 Link Speed [Auto]
This item allows you to select the operating speed of the PCIEX16_1 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_2 Link Speed [Auto]
This item allows you to select the operating speed of the PCIEX16_2 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_3 Link Speed [Auto]
This item allows you to select the operating speed of the PCIEX16_3 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_4 Link Speed [Auto]
This item allows you to select the operating speed of the PCIEX16_4 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_5 Link Speed [Auto]
This item allows you to select the operating speed of the PCIEX16_5 slot.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
Intel VT for Directed I/O (VT-d)
The items in this menu allow you to configure the Intel ® Virtualization Technology for Directed
I/O (VT-d).
VTd Azalea VCp Optimizations [Disabled]
This item allows you to enable/disable the Azalea VCp Optimizations.
Configuration options: [Enabled] [Disabled]
Intel VT for Directed I/O (VT-d) [Disabled]
This item allows you to enable/disable the Intel Virtualization Technology for Directed
I/O (VT-d) by reporting the I/O device assigment to VMM through DMAR ACPI Tables.
Configuration options: [Enabled] [Disabled]
Chapter 3: BIOS setup
The following items appear only when you set the Intel VT for Directed I/O (VT-d) to
[Enabled] .
Interrupt Remapping [Enabled]
This item allows you to enable/disable the VT-D Interrupt Remapping
Support.
Configuration options: [Enabled] [Disabled]
Coherency Support (Non-Isoch) [Enabled]
This item allows you to enable/disable the Non-Isoch VT_D Engine
Coherency Support.
Configuration options: [Enabled] [Disabled]
Coherency Support (Isoch) [Enabled]
This item allows you to enable/disable the Isoch VT_D Engine Coherency
Support.
Configuration options: [Enabled] [Disabled]
3.6.5 USB Configuration
The items in this menu allow you to change the USB-related features.
The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None.
Intel xHCI Mode [Smart Auto]
[Auto] The xHCI is automatically enabled and runs at USB 3.0 mode when the xHCI driver is installed in the operating system.
[Smart Auto] Upon detection, the xHCI driver supports the USB 3.0 mode during both
POST and operating system.
[Enabled] Enables the xHCI controller.
[Disabled] Disables the xHCI controller.
ASUS X99-DELUXE Series 3-39
3-40
xHCI Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Your system supports the USB 3.0 devices in legacy operating systems.
Your USB 3.0 devices can be used for BIOS setup only and cannot be recognized in the boot devices list.
Your system automatically detects the presence of USB3.0 devices at startup. If any USB 3.0 devices are detected, the xHCI legacy USB support is enabled.
EHCI Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
Your system supports the USB 2.0 devices in legacy operating systems.
Your USB 2.0 devices can be used for BIOS setup only and cannot be recognized in the boot devices list.
Your system automatically detects the presence of USB 2.0 devices at startup. If any USB 2.0 devices are detected, the xHCI legacy USB support is enabled.
xHCI Hand-off [Disabled]
[Enabled]
[Disabled]
Enables the support for operating systems without an xHCI hand-off feature.
Disables the xHCI Hand-off support.
EHCI Hand-off [Disabled]
[Enabled]
[Disabled]
Enables the support for operating systems without an EHCI hand-off feature.
Disables the EHCI Hand-off support.
USB Single Port Control
This item allows you to enable or disable the individual USB ports.
Refer to section 1.2.2 Motherboard layout for the location of the USB ports.
Chapter 3: BIOS setup
3.6.6 Platform Misc Configuration
The items in this menu allow you to configure the platform-related features.
SA - PCI Express
SA SMI ASPM [Disabled]
This item allows you to enable/disable the ASPM (L1) support for the downstream devices.
Configuration options: [Auto] [Disabled] [L1 only]
PEG ASPM Support [Disabled]
This item allows you to enable/disable the ASPM support for the downstream devices.
Configuration options: [Disabled] [L1 only]
PCH - PCI Express
PCH DMI ASPM [Disabled]
This item allows you to enable/disable the PCH DMI ASPM Setting.
Configuration options: [Disabled] [Enabled]
ASPM Support [Disabled]
This item allows you to enable/disable the ASPM support for all downstream devices.
Configuration options: [Disabled] [L1 only]
ASUS X99-DELUXE Series 3-41
3.6.7 Onboard Devices Configuration
Scroll down to view the other BIOS items.
3-42
HD Audio Controller [Enabled]
This item allows you to use the Azalia High Definition Audio Controller
Configuration options: [Disabled] [Enabled]
The following items appear only when you set the HD Audio Controller to [Enabled].
Front Panel Type [HD Audio]
This item allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front panel audio module supports.
[HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio.
[AC97] Sets the front panel audio connector (AAFP) mode to legacy AC’97.
SPDIF Out Type [SPDIF]
[SPDIF] Sets to an SPDIF audio output.
[HDMI] Sets to an HDMI audio output.
Chapter 3: BIOS setup
Audio LED Switch [Auto]
[Auto]
[Disabled]
The audio LEDs only light up when the system is fully powered and operating.
The audio LEDs does not light up.
[Enabled] The audio LEDs always light up at the S0 (Working), S3 (Sleep), S5
(Soft off) states. The LEDs do not light up at the S5 state when the
ErP Ready item is enabled.
PCI-EX4_1 Slot (Black) Bandwidth [Audio]
[Auto]
[X2 Mode]
[X4 Mode]
[Disabled]
The SATAEXPRESS_E1 slot is disabled when there is a device on installed on PCIEX4_1 slot. Set this option to x2 mode or x4 mode when the installed PCIe device is higher than x4 interface.
Runs at x2 mode with USB3_E12 enabled. The SATAEXPRESS_E1 is disabled.
Runs at x4 mode for a high performance support with USB3_E12 and the
SATAEXPRESS_E1 is disabled.
Disables the PCIEX4_1 slot. The USB3_12 and SATAEXPRESS_E1 are enabled.
PCI-EX4_5 Slot (Black) Bandwidth [X4 Mode]
[X4 Mode]
[X8 Mode]
Runs at x4 mode for system resource flexibility. M.2 runs at x4 mode.
Runs at x8 mode for a high performance support with M.2 disabled.
Set the PCIEX16_5 slot bandwidth to X8 mode for a higher performance of the 3-WAY configuration.
ASMedia USB 3.0 Controller [Enabled]
This item allows you to enable/disable the ASMedia ® USB 3.0 controller of your system.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set the ASMedia USB 3.0 Controller to
[Enabled] .
ASMedia USB 3.0 Battery Charging Support [Disabled]
This item allows you to enable/disable the ASMedia ® USB 3.0 battery charging support of your system.
Configuration options: [Disabled] [Enabled]
ASUS X99-DELUXE Series 3-43
3-44
ASM1061SE Storage Controller (SATAEXPRESS_E1) [Enabled]
This item allows you to enable/disable the ASMedia storage Controller.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set the ASM1061 Storage Controller
(SATAEXPRESS_E1) to [Enabled].
Windows Hot-plug Notification [Disabled]
This item allows you to enable/disable the Hot Plug notification in Windows ® system.
operating
Configuration options: [Disabled] [Enabled]
ASPM Support [Enabled]
This item allows you to enable/disable the ASPM (active state power management) controller to save energy when using the ASM1060SE Storage Controller.
Configuration options: [Disabled] [Enabled]
SATAExpress_E1 SRIS Support [Enabled]
[Auto] Automatically adjusts the SRIS (Separate Reference Clock
Independent Spectrum Clocking Architecture) support for connected
SATA Express devices.
[Disabled] Select for ASUS RUNWAY SATA Express bridge card.
Bluetooth Controller [Enabled]
This item allows you to enable/disable the Bluetooth controller.
Configuration options: [Disabled] [Enabled]
Wi-Fi Controller [Enabled]
This item allows you to enable/disable the Wi-Fi controller.
Configuration options: [Disabled] [Enabled]
Intel LAN Controller (LAN1-LAN2) [Enabled]
This item allows you to enable or disable the Intel LAN1/2 controllers.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set the Intel LAN Controller to [Enabled].
Intel PXE OPROM (LAN1-LAN2) [Disabled]
This item allows you to enable or disable the PXE OptionRom of the Intel ® LAN controller.
Configuration options: [Enabled] [Disabled]
Chapter 3: BIOS setup
3.6.8 APM Configuration
ErP Ready [Disabled]
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)]
Restore AC Power Loss [Power Off]
This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCI-E/PCI [Disabled]
This item allows you to enable/disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards.
Configuration options: [Disabled] [Enabled]
Power On By RTC [Disabled]
This item allows you to enable/disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date.
Configuration options: [Disabled] [Enabled]
3.6.8 Network Stack Configuration
Network stack [Disabled]
This item allows you to disable/enable the UEFI network stack.
Configuration options: [Disabled] [Enabled]
ASUS X99-DELUXE Series 3-45
The following item appears only when you set the Network Stack to [Enabled].
Ipv4/Ipv6 PXE Support [Enabled]
This item allows you to enable/disable the Ipv4/Ipv6 PXE wake event.
Configuration options: [Disabled] [Enabled]
PXE boot wait time [0]
This item allows you to set a wait time to press ESC key to abort the PXE boot. You can use the <+> or <-> keys to adjust the value. The values range from 0 to 5 seconds.
Media detect time [0]
This item allows you to set a media detect wait time to detect the media. You can use the <+> or <-> keys to adjust the value. The values range from 0 to 5 seconds.
3-46 Chapter 3: BIOS setup
3.7 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change the fan settings.
Scroll down to display the other BIOS items.
CPU Temperature / MB Temperature / VRM Temperature / PCH Core
Temperature / SENSOR1 Temperature / EXT_Sensor1 Temperature / EXT_
Sensor2 Temperature / EXT_Sensor3 Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the CPU, motherboard,
VRM, PCH Core, SENSOR1, and SENSOR1-3 temperatures. Select [Ignore] if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxx RPM] or [Ignore] / [N/A], CPU Optional Fan Speed
[xxxx RPM] or [Ignore] / [N/A], Chassis Fan 1/4 Speed [xxxx RPM] or [Ignore]
/ [N/A], EXT Fan 1/3 Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU, chassis, power, and extension fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select [Ignore] if you do not wish to display the detected speed.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select [Ignore] if you do not want to detect this item.
Qfan Tuning
Click this item to automatically detect the lowest speed and configure the minimum duty cycle for each fan.
ASUS X99-DELUXE Series 3-47
3-48
CPU Q-Fan Control [Auto]
This item allows you to set the CPU Q-Fan operating mode.
[Auto] Detects the type of CPU fan installed and automatically switches the control modes.
[PWM Mode] Enables the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan.
[DC Mode] Enables the CPU Q-Fan control feature in DC mode for 3-pin CPU fan.
[Disabled] Disables the Q-Fan control.
The following items appear only when you set the CPU Q-Fan Control to [Auto], [PWM
Mode] , and [DC Mode].
CPU Fan Speed Low Limit [300 RPM]
This item allows you to set the low limit warning for CPU Fan speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
CPU Fan Profile [Standard]
This item allows you to set the appropriate performance level of the CPU fan.
[Standard] Set to make the CPU fan adjust automatically depending on the CPU temperature.
[Silent]
[Turbo]
[Manual]
Set to minimize the fan speed for quiet CPU fan operation.
Set to achieve maximum CPU fan speed.
Set to assign the detailed fan speed control parameters.
The following items appear only when you set the CPU Fan Profile to [Manual].
CPU Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 20°C to 75°C.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum CPU fan duty cycle. The values may differ via Qfan tuning.
CPU Middle Temperature [45]
Use the <+> or <-> keys to set the value for CPU Middle Temperature. The range of the values depends on the CPU installed.
CPU Fan Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the CPU fan middle duty cycle. The values may differ via Qfan tuning.
CPU Lower Temperature [40]
Use the <+> or <-> keys to adjust the CPU fan’s lower temperature. The values range from 20% to 75%.
CPU Fan Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The values may differ via Qfan tuning.
Chapter 3: BIOS setup
Chassis Fan 1/4 Q-Fan Control [DC Mode]
These items allow you to set the chassis fans’ Q-Fan control feature into DC Mode, PWM
Mode, or disable these Q-Fan controls from your motherboard.
Configuration options: [Disabled] [DC Mode] [PWM Mode]
The following items appear only when you set the Chassis Fan 1/4 Q-Fan Control to [PWM
Mode] or [DC Mode].
Chassis Fan 1/4 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Configuration options: [CPU] [MB] [VRM] [PCH] [T_SENSOR1] [EXT_SENSOR1]
[EXT_SENSOR2] [EXT_SENSOR3]
If you select T_SENSOR1, plug a thermistor cable to T_SENSOR1 header and stick the thermistor cable’s head to the desired component as the temperature source.
Chassis Fan 1/4 Speed Low Limit 1/4 [300 RPM]
This item allows you to disable or set the chassis fans’ warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Chassis Fan 1/4 Profile [Standard]
This item allows you to set the appropriate performance level of the chassis fan.
[Standard] Set to make the chassis fan adjust automatically depending on the chassis temperature.
[Silent]
[Turbo]
[Manual]
Set to minimize the fan speed for quiet chassis fan operation.
Set to achieve maximum chassis fan speeds.
Set to assign detailed fan speed control parameters.
The following items appear only when you set the Chassis Fan Profile to [Manual].
Chassis Fan 1/4 Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 40°C to 90°C.
Chassis Fan 1/4 Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum chassis fan duty cycle. The values may differ via Qfan tuning.
Chassis Fan 1/4 Middle Temperature [45]
Use the <+> or <-> keys to set the value for Chassis Fan Middle
Temperature.
Chassis Fan 1/4 Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the chassis fan middle duty cycle. The values may differ via Qfan tuning.
Chassis Fan 1/4 Lower Temperature [40]
Use the <+> or <-> keys to adjust the chassis fans’ lower temperature. The values may differ via Qfan tuning.
ASUS X99-DELUXE Series 3-49
3-50
Chassis Fan 1/4 Min. Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The values may differ via Qfan tuning.
EXT 1/3 Q-Fan Control [DC Mode]
These items allow you to set the extension fans’ Q-Fan control feature into DC Mode, PWM
Mode, or disable these extension Q-Fan controls from your motherboard.
Configuration options: [Disabled] [DC Mode] [PWM Mode]
The following items appear only when you set the EXT 1/3 Q-Fan Control to [PWM Mode] or [DC Mode].
EXT 1/3 Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Configuration options: [CPU] [MB] [VRM] [PCH] [T_SENSOR1] [EXT_SENSOR1]
[EXT_SENSOR2] [EXT_SENSOR3]
If you select T_SENSOR1, plug a thermistor cable to T_SENSOR1 header and stick the thermistor cable’s head to the desired component as the temperature source.
EXT 1/3 Fan Speed Low Limit [300 RPM]
This item allows you to disable or set the extension fans’ warning speeds.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
EXT 1/3 Fan Profile [Standard]
This item allows you to set the appropriate performance level of the chassis fan.
[Standard] Set to make the chassis fan adjust automatically depending on the chassis temperature.
[Silent] Set to minimize the fan speed for quiet chassis fan operation.
[Turbo]
[Manual]
Set to achieve maximum chassis fan speed.
Set to assign detailed fan speed control parameters.
The following items appear only when you set the EXT Fan Profile to [Manual].
EXT 1/3 Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the EXT 1/3 temperature. The values range from 40°C to 90°C.
EXT Fan 1/3 Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum extension fan duty cycle.
The values may differ via Qfan tuning.
Chassis Fan 4 Middle Temperature [45]
Use the <+> or <-> keys to set the value for Chassis Fan Middle
Temperature.
Chassis Fan 4 Middle Duty Cycle(%) [60]
Use the <+> or <-> keys to adjust the chassis fan middle duty cycle. The values may differ via Qfan tuning.
Chapter 3: BIOS setup
EXT 1/3 Fan Lower Temperature [40]
Use the <+> or <-> keys to adjust the extension fans’ lower temperature.
The values may differ via Qfan tuning.
Allow Fan Stop [Disabled]
This item allows your fans to run at 0% duty cycle when the temperature of the source drops below the lower temperature.
Configuration options: [Disabled] [Enabled]
Anti Surge Support [ON]
This item allows you to on/off the OVP (Over Voltage Protection) and UVP (Under Voltage
Protection) functions. This causes the system to automatically shut down when the voltage exceeds the safe range that protects the motherboard’s components.
Configuration options: [ON] [OFF]
Chassis Intrude Detect Support [ON]
This item allows you to on/off the chassis intrude detect feature.
Configuration options: [ON] [OFF]
3.8 Boot menu
The Boot menu items allow you to change the system boot options.
Boot Configuration
Fast Boot [Enabled]
[Disabled]
[Enabled]
This item allows your system to go back to its normal boot speed.
This item allows your system to accelerate the boot speed.
ASUS X99-DELUXE Series 3-51
3-52
The following items appear only when you set the Fast Boot to [Enabled].
SATA Support [All Devices]
[All Devices] All devices connected to SATA ports are available during POST.
This process extends the POST time.
[Hard Drive Only] Only hard drives connected to SATA ports are detected during
POST.
[Boot Drive Only] Only boot drives connected to a SATA ports are detected during
POST.
USB Support [Partial Initialization]
[Disabled] All USB devices will not be available until OS boot up for a fastest POST time.
[Full Initialization] All USB devices will be available during POST. This process will extend the POST time.
[Partial
Initialization]
For a faster POST time, only USB ports with keyboard and mouse connections will be detected.
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Select to skip the network stack driver from loading during POST.
Select to load the network stack driver during POST.
DirectKey (DRCT) [Enabled]
[Disabled]
[Enabled]
Disables the DirectKey button. The system will only power on or off when you press the DirectKey button.
Allows the system to power on and go to the BIOS Setup directly when you press the Reset button. Connect the 2-pin connector of the chassis reset buton cable to the onboard DRCT header.
Next Boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot on the next boot after an AC power loss.
[Fast Boot] Accelerates the boot speed on the next boot after an AC power loss.
Boot Logo Display [Auto]
[Auto] Sets the boot logo to display during POST.
[Full Screen] Sets the boot logo display in full screen during POST.
[Disabled] Disables the boot logo display during POST.
The following item appears only when you set the Boot Logo Display to [Auto] and [Full
Screen] .
Chapter 3: BIOS setup
Post Delay Time [3 sec]
This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. You can only execute the POST delay time during normal boot. The values range from 0 to 10 seconds.
This feature only works when set under normal boot.
The following items appear only when you set the Boot Logo Display to [Disabled].
Post Report [5 sec]
This item allows you to select a desired POST report waiting time.
Configuration options: [1 sec] - [10 sec] [Until Press ESC]
Bootup NumLock State [On]
This item allows you to on/off power-on state of the NumLock.
Configuration options: [On] [Off]
Wait For ‘F1’ If Error [Enabled]
This item allows your system to wait for the <F1> key to be pressed when error occurs.
Configuration options: [Disabled] [Enabled]
Option ROM Messages [Force BIOS]
This item allows you to set the display mode for Option ROM.
Configuration options: [Force BIOS] [Keep Current]
INT19 Trap Response [Immediate]
[Immediate]
[Postponed]
Executes the trap for INT19 immediately.
Executes the trap during legacy boot.
Above 4G Decoding [Disabled]
This item allows you to decode the 64-bit capable devices above 4G address space. Ensure that your system supports 64-bit PCI decoding.
Configuration options: [Disabled] [Enabled]
Setup Mode [EZ Mode]
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.
CSM (Compatibility Support Module)
This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility.
ASUS X99-DELUXE Series 3-53
3-54
Launch CSM [Enabled]
[Auto]
[Enabled]
[Disabled]
The system automatically detects the bootable devices and the addon devices.
For better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows ® UEFI mode.
Disables the CSM to fully support the non-UEFI driver add-on devices or the Windows ® UEFI mode.
The following items appear only when you set the Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OpROM]
This item allows you to select the type of devices that you want to boot.
Configuration options: [UEFI and Legacy OpROM] [Legacy OpROM only]
[UEFI only]
Boot from Network Devices [Legacy OpROM first]
This item allows you to select the type of network devices that you want to launch.
Configuration options: [Legacy OpROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OpROM first]
This item allows you to select the type of storage devices that you want to launch.
Configuration options: [Both, Legacy OpROM first] [Both, UEFI first]
[Legacy OpROM first] [UEFI driver first] [Ignore]
Boot from PCI-E/PCI Expansion Devices [Legacy OpROM first]
This item allows you to select the type of PCIe/PCI expansion devices that you want to launch.
Configuration options: [Legacy OpROM first] [UEFI driver first]
Secure Boot
This item allows you to configure the Windows ® Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST.
OS Type [Windows UEFI Mode]
[Windows UEFI
Mode]
[Other OS]
This item allows you to select your installed operating system.
Execute the Microsoft ® Secure Boot check. Only select this option when booting on Windows ® UEFI mode or other
Microsoft ® Secure Boot compliant OS.
Get the optimized function when booting on Windows ® non-
UEFI mode. Microsoft
UEFI mode.
® Secure Boot only supports Windows ®
Chapter 3: BIOS setup
Key Management
This item allows you to manage the Secure Boot keys.
Install Default Secure Boot keys
This item allows you to immediately load the default Security Boot keys,
Platform key (PK), Key-exchange Key (KEK), Signature database (db), and
Revoked Signatures (dbx). When the default Secure boot keys are loaded, the PK state will change from Unloaded mode to loaded mode.
Clear Secure Boot keys
This item appears only when you load the default Secure Boot keys. This item allows you to clear all default Secure Boot keys.
Save Secure Boot Keys
This item allows you to save the PK (Platform Keys) to a USB storage device.
PK Management
The Platform Key (PK) locks and secures the firmware from any permissible changes.
The system verifies the PK before your system enters the OS.
Delete PK
This item allows you to delete the PK from your system. Once the PK is deleted, all the system’s Secure Boot keys will not be active.
Configuration options: [Yes] [No]
Load PK from File
This item allows you to load the downloaded PK from a USB storage device.
The PK file must be formatted as a UEFI variable structure with time-based authenticated variable.
KEK Management
The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database
(db) and Revoked Signature database (dbx).
Key-exchange Key (KEK) refers to Microsoft ® Secure Boot Key-Enrollment Key (KEK).
Delete the KEK
This item allows you to delete the KEK from your system.
Configuration options: [Yes] [No]
Load KEK from File
This item allows you to load the downloaded KEK from a USB storage device.
Append KEK from File
This item allows you to load the additional KEK from a storage device for an additional db and dbx loaded management.
The KEK file must be formatted as a UEFI variable structure with time-based authenticated variable.
ASUS X99-DELUXE Series 3-55
3-56
DB Management
The db (Authorized Signature database) lists the signers or images of UEFI applications, operating system loaders, and UEFI drivers that you can load on the single computer.
Delete the db
This item allows you to delete the db file from your system.
Configuration options: [Yes] [No]
Load db from File
This item allows you to load the downloaded db from a USB storage device.
Append db from File
This item allows you to load the additional db from a storage device so that more images can be loaded securely.
The db file must be formatted as a UEFI variable structure with time-based authenticated variable.
DBX Management
The dbx (Revoked Signature database) lists the forbidden images of db items that are no longer trusted and cannot be loaded.
Delete the dbx
This item allows you to delete the dbx file from your system.
Load dbx from File
This item allows you to load the downloaded dbx from a USB storage device.
Configuration options: [Yes] [No]
Append dbx from File
This item allows you to load the additional dbx from a storage device so that more db’s images cannot be loaded.
The dbx file must be formatted as a UEFI variable structure with time-based authenticated variable.
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
• To access Windows ® OS in Safe Mode, press <F8 > after POST (Windows ® 8 not supported).
• To select the boot device during system startup, press <F8> when ASUS Logo appears.
Boot Override
These item displays the available devices. The number of device items that appear on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device.
Chapter 3: BIOS setup
3.9 Tool menu
The Tool menu items allow you to configure options for special functions. Select an item then press <Enter> to display the submenu.
GPU Post
This item shows the installed graphics cards in your motherboard. It also shows the recommended number of graphics card to install to your motherboard for best performance.
Setup Animator
This item allows you to enable or disable the Setup animator.
Configuration options: [Disabled] [Enabled]
3.9.1 ASUS EZ Flash 2 Utility
This item allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press
<Enter> to confirm your choice.
For more details, refer to section 3.11.2 ASUS EZ Flash 2.
ASUS X99-DELUXE Series 3-57
3.9.2 ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
3-58
Load from Profile
This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the profile number that saved your BIOS settings, press <Enter>, and then select Yes.
• DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure!
• We recommend that you update the BIOS file only coming from the same memory/
CPU configuration and BIOS version.
Profile Name
This item allows you to key in a profile name.
Save to Profile
This item allows you to save the current BIOS settings to the BIOS Flash, and create a profile. Key in a profile number from one to eight, press <Enter>, and then select Yes.
Load/Save Profile from/to USB Drive
This item allows you to load or save profile from your USB drive, load and save profile to your
USB drive.
Chapter 3: BIOS setup
3.9.3 ASUS DRAM SPD Information
This item allows you to view the DRAM SPD information.
ASUS X99-DELUXE Series 3-59
3.10 Exit menu
The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu.
3-60
Load Optimized Defaults
This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears.
Select OK to load the default values.
Save Changes & Reset
Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved. When you select this option or if you press <F10>, a confirmation window appears. Select OK to save changes and exit.
Discard Changes & Exit
This option allows you to exit the Setup program without saving your changes. When you select this option or if you press <Esc>, a confirmation window appears. Select Yes to discard changes and exit.
Launch EFI Shell from USB drives
This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available filesystem devices.
Chapter 3: BIOS setup
3.11 Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result to system’s failure to boot. Carefully follow the instructions in this chapter to update your BIOS when necessary.
Visit http://www.asus.com to download the latest BIOS file for this motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1. EZ Update: Updates the BIOS in Windows ® environment.
2. ASUS EZ Flash 2: Updates the BIOS using a USB flash drive.
3. ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a
USB flash drive when the BIOS file fails or gets corrupted.
4. ASUS BIOS Updater: Updates the BIOS in DOS environment using the motherboard support DVD and a USB flash disk drive.
3.11.1 EZ Update
The EZ Update is a utility that allows you to update the motherboard BIOS in Windows ® environment.
• EZ Update requires an Internet connection either through a network or an ISP
(Internet Service Provider).
• This utility is available in the support DVD that comes with the motherboard package.
Refer to the documentation that came with the support DVD.
3.11.2 ASUS EZ Flash 2
ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility.
Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB flash disk that contains the latest BIOS file to the USB port.
2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash Utility and press <Enter> to enable it.
ASUS X99-DELUXE Series 3-61
3-62
3. Press <Tab> to switch to the Drive field.
4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then press <Enter>.
5. Press <Tab> to switch to the Folder Info field.
6. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform the BIOS update process. Reboot the system when the update process is done.
• This function can support devices such as a USB flash disk with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 3.10 Exit Menu for details.
Chapter 3: BIOS setup
3.11.3 ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains the BIOS file.
The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save it to a USB flash drive.
Recovering the BIOS
To recover the BIOS:
1. Turn on the system.
2. Insert the motherboard support DVD to the optical drive, or the USB flash drive containing the BIOS file to the USB port.
3. The utility automatically checks the devices for the BIOS file. When found, the utility reads the BIOS file and enters ASUS EZ Flash 2 automatically.
4. The system requires you to enter BIOS Setup to recover the BIOS setting. To ensure system compatibility and stability, we recommend that you press <F5> to load default
BIOS values.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!
3.11.4 ASUS BIOS Updater
ASUS BIOS Updater allows you to update the BIOS in DOS environment.
The screen captures used in this section are for reference only and may not be exactly the same as actually shown on your computer screen.
Before updating BIOS
• Prepare the motherboard support DVD and a USB flash drive.
• Download the latest BIOS file and BIOS Updater from http://support.asus.com and save them in your USB flash drive.
NTFS is not supported under DOS environment. Ensure that your USB flash drive is in single partition and in FAT32/16 format.
• Turn off the computer.
• Ensure that your computer has a DVD optical drive.
ASUS X99-DELUXE Series 3-63
3-64
Booting the system in DOS environment
To boot the system in DOS:
1. Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
2. Boot your computer then press <F8> to launch the select boot device screen.
3. When the select boot device screen appears, insert the Support DVD into the optical drive then select the optical drive as the boot device.
Please select boot device:
E1: ASUS DVD-E818A6T (4069MB)
USB DISK 2.0 (3824MB)
UEFI: (FAT) USB DISK 2.0 (3824MB)
Enter Setup
and to move selection
ENTER to select boot device
ESC to boot using defaults
4. When the booting message appears, press <Enter> within five (5) seconds to enter
FreeDOS prompt.
ISOLINUX 3.20 2006-08-26 Copyright (C) 1994-2005 H. Peter Anvin
A Bootable DVD/CD is detected. Press ENTER to boot from the DVD/CD.
If no key is pressed within 5 seconds, the system will boot next priority device automatically. boot:
5. On the FreeDOS prompt, type d: then press <Enter> to switch the disk from Drive C
(optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:/> d:
D:/>
Updating the BIOS file
To update the BIOS file:
1. On the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:/> bupdater /pc /g
Chapter 3: BIOS setup
2. On the BIOS Updater screen, press <Tab> to switch from Files panel to Drives panel then select D:.
BOARD:
VER:
DATE:
ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01]
Current ROM
X99-DELUXE
0210
PATH: C:\
(H :00 B :00)
06/30/2014
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
C:
D:
FORMAN~1 <DIR>
X99-DE~1.CAP 8390626 2014-06-30 21:14:34
Drives panel
Files panel
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [Esc] Exit
3. Press <Tab> to switch from Drives panel to Files panel then press <Up/Down or Home/
End> keys to select the BIOS file and press <Enter>.
4. After the BIOS Updater checks the selected BIOS file, select Yes to confirm the BIOS update.
Are you sure you want to update the BIOS?
Yes No
The BIOS Backup feature is not supported due to security regulations.
5. Select Yes then press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater.
6. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure.
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
Load Optimized Defaults item under the Exit BIOS menu. See section 3.10 Exit menu for details.
ASUS X99-DELUXE Series 3-65
3-66 Chapter 3: BIOS setup
Appendices
Appendices
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
ASUS X99-DELUXE Series A-1
A-2
IC: Canadian Compliance Statement
Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS
210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations.
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas provoquer d’interférences et
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
VCCI: Japan Compliance Statement
VCCI Class B Statement
KC: Korea Warning Statement
Appendices
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.
RF Equipment Notices
CE: European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0–300 GHz). This wireless device complies with the R&TTE Directive.
Wireless Radio Use
This device is restricted to indoor use when operating in the 5.15 to 5.25 GHz frequency band.
Exposure to Radio Frequency Energy
The radiated output power of the Wi-Fi technology is below the FCC radio frequency exposure limits. Nevertheless, it is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized.
FCC Bluetooth Wireless Compliance
The antenna used with this transmitter must not be colocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant.
ASUS X99-DELUXE Series A-3
A-4
Bluetooth Industry Canada Statement
This Class B device meets all requirements of the Canadian interference-causing equipment regulations.
Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
NCC: Taiwan Wireless Statement
Japan RF Equipment Statement
KC (RF Equipment)
Google™ License Terms
Copyright© 2014 Google Inc. All Rights Reserved.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at: http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the
License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF
ANY KIND, either express or implied.
See the License for the specific language governing permissions and limitations under the
License.
Appendices
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone
Fax
Web site
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798 [email protected]
www.asus.com.com/
Technical Support
Telephone
Fax
Online support
+86-21-38429911
+86-21-5866-8722, ext. 9101# http://www.asus.com/tw/support/
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
Web site
800 Corporate Way, Fremont, CA 94539, USA
+1-510-739-3777
+1-510-608-4555 http://www.asus.com/us/
Technical Support
Support fax
Telephone
Online support
+1-812-284-0883
+1-812-282-2787 http://www.service.asus.com/
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911 http://www.asus.com/de http://eu-rma.asus.com/sales
Technical Support
Telephone
Support Fax
Online support
+49-1805-010923*
+49-2102-9599-11 http://www.asus.com/de/support/
ASUS X99-DELUXE Series A-5
A-6
Appendices
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project