Garmin Nüvi 2350 Owner's Manual

nüvi 2200/2300/2400 series
®
owner’s manual
for use with these nüvi models:
2200, 2240, 2250, 2300, 2310, 2340,
2350, 2360, 2370 2440, 2450, 2460
© 2010–2011 Garmin Ltd. or its subsidiaries
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced,
copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without
the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy
of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of
this manual or of any revision hereto, provided that such electronic or printed copy of this manual must
contain the complete text of this copyright notice and provided further that any unauthorized commercial
distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change
or improve its products and to make changes in the content without obligation to notify any person
or organization of such changes or improvements. Go to the Garmin Web site (www.garmin.com) for
current updates and supplemental information concerning the use and operation of this and other Garmin
products.
Garmin®, the Garmin logo, nüvi®, and MapSource® are trademarks of Garmin Ltd. or its subsidiaries,
registered in the USA and other countries. Garmin Lock™, ecoRoute™, cityXplorer™, myTrends™, nüMaps
Guarantee™, nüMaps Lifetime™, nüRoute™, and trafficTrends™ are trademarks of Garmin Ltd. or its
subsidiaries. These trademarks may not be used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name
by Garmin is under license. Windows® and Windows NT® are registered trademarks of Microsoft
Corporation in the United States and/or other countries. Mac® is a registered trademark of Apple
Computer, Inc. microSD™ is a trademark of SanDisk or its subsidiaries.
Table of Contents
Table of Contents
nüvi 2200/2300/2400 Series
Models.................................. 1
Getting Started..................... 2
Connecting the Device to
Vehicle Power.......................... 2
Mounting the Device................... 4
About myDashboard................... 4
Device Overview........................ 5
Main Menu............................ 9
Using the Main Menu................. 9
About Main Menu
Customization.......................... 9
Choosing a Main Menu.............11
Finding Locations.............. 12
About Points of Interest............ 12
Setting a Home Location.......... 15
Location Searches.................... 16
Using the Location Map............ 19
Favorites................................... 21
nüvi 2200/2300/2400 Series Owner’s Manual
Planning a Trip......................... 22
Editing a Trip Itinerary.............. 22
Voice Command................. 24
About Voice Commands........... 24
Map Pages.......................... 27
Viewing the Map While
Navigating.............................. 27
Hands-Free Phone Calls... 32
About Pairing the Devices........ 32
Using the Tools.................. 36
Viewing Current Location
Information............................. 36
Using Help................................ 36
About ecoRoute . ..................... 36
Using the Picture Viewer.......... 39
Using the World Clock ............. 40
Using the Calculator................. 40
Capturing Screenshots............. 40
Using the Unit Converter ......... 41
i
Table of Contents
Traffic.................................. 42
Subscription Activation............. 42
Traffic Receiver........................ 43
Receiving Traffic Information.... 43
Traffic on Your Route................ 44
Adding a Subscription.............. 45
About Offers............................. 46
Data Management.............. 47
File Types................................. 47
About Memory Cards............... 47
Transferring Files To Your
Computer .............................. 47
Deleting Files . ......................... 48
Customizing the Device.... 49
System Settings....................... 49
Navigation Settings.................. 50
Route Preferences................... 51
Display Settings........................ 54
Language Settings................... 55
Viewing Map Information ......... 55
Bluetooth Settings.................... 55
Enabling Traffic......................... 56
ii
Restoring Settings.................... 56
Appendix............................ 57
Power Cables........................... 57
About GPS Satellite Signals..... 57
Caring for Your Device............. 57
Locking the Device................... 59
Erasing User Data.................... 60
Changing the Fuse in the
Vehicle Power Cable.............. 60
Mounting on Your Dashboard... 61
Removing the Device, Cradle,
and Mount.............................. 61
About nüMaps Lifetime . .......... 62
Purchasing Additional Maps..... 63
Custom Points of Interest......... 63
Purchasing Accessories........... 64
Contacting Garmin Product
Support.................................. 64
Troubleshooting . ..................... 65
Index................................... 67
nüvi 2200/2300/2400 Series Owner’s Manual
nüvi 2200/2300/2400 Series Models
nüvi 2200/2300/2400 Series Models
Not all features are supported on all models. Go to www.garmin.com or see the
packaging contents on your product box for more information.
Models with “LT,” “LM,” and “LMT” in their name include lifetime
subscriptions. See pages 42 and 62.
Model
Junction Historical
Voice
Bluetooth©
Lane Assist
View
Traffic Command
Technology
2200
2240/2250
✓
2300
2310
✓
2340/2350
Europe Only
Europe
Only
✓
✓
✓
✓
✓
2360
✓
✓
✓
✓
✓
2370
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
2440/2450
2460
nüvi 2200/2300/2400 Series Owner’s Manual
✓
1
Getting Started
Getting Started
‹ WARNING
S ee the Important Safety and
Product Information guide in the
product box for product warnings
and other important information.
1. Connect the device to vehicle
power (page 2).
2. Mount the device (page 4).
3. Register the device (page 5).
4. Check for updates.
• Software updates (page 5).
• Free map update (page 5).
2
Connecting the Device
to Vehicle Power
‹ WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to
extreme heat, remove the device from
the vehicle when exiting or store it
out of direct sunlight.
Charge your device before using it on
battery power.
1. Fit the bottom of your device into
the mount.
2. Tilt your device back until it
snaps into place.
nüvi 2200/2300/2400 Series Owner’s Manual
Getting Started
3. Plug the vehicle power cable ➊
into the USB connector ➋ on the
mount or device.
➋
➊
4. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
nüvi 2200/2300/2400 Series Owner’s Manual
5. If you are using a traffic receiver
in Europe, connect the external
antenna to the traffic receiver and
secure it to the windshield using
the suction cups.
After the device has been connected
to vehicle power, the following
occurs.
• The device turns on.
• The device acquires satellite
signals. When at least one of the
bars is green, your device has
acquired satellite signals.
• NOTE: The device may need a
clear view of the sky to acquire
satellite signals.
• The device charges as you drive.
in the status bar indicates the
status of the internal battery.
3
Getting Started
Mounting the Device
Notice
Before mounting the device, see
the Important Safety and Product
Information guide for information
about laws pertaining to windshield
mounting.
1. Remove the clear plastic from the
suction cup.
2. Clean and dry your windshield
and the suction cup with a lintfree cloth.
3. Place the suction cup on the
windshield.
4. Flip the lever back toward the
windshield.
5. Snap the mount ➊ onto the
suction cup arm ➋.
4
➊
➋
About myDashboard
Use myDashboard to register your
device, check for software and map
updates, access product manuals and
support, and more.
Setting Up myDashboard
1. Connect the USB cable to the
USB connector on the device.
2. Connect the USB cable to the
USB port on your computer.
3. Go to www.garmin.com
/dashboard.
4. Follow the on-screen instructions.
nüvi 2200/2300/2400 Series Owner’s Manual
Getting Started
Registering the Device
1. From myDashboard, click
Register Now.
2. Follow on-screen instructions.
Updating the Software
1. Open myDashboard (page 4).
2. Under Software Updates, click
Update Now.
3. Follow the on-screen instructions.
nüMaps Guarantee™
If you register at http://my.garmin
.com within 60 days of acquiring
satellites while driving, your device
is eligible for one free map update.
Go to www.garmin.com/numaps.
Updating Maps
1. Open myDashboard (page 5).
2. Register the device (page 5).
3. Under Map Updates, click
Update Now.
4. Follow the on-screen instructions.
nüvi 2200/2300/2400 Series Owner’s Manual
Device Overview
Each model has a power key ➊ and a
microSD™ ➋ card slot.
nüvi 2200
➊
➋
nüvi 2300/2400
➊
➋
5
Getting Started
USB Connectors on the
Devices
Use the USB connector on the device
to connect the device to vehicle
power or a computer.
The USB connector is in different
locations on the nüvi 2200, 2300, and
2400 models.
mini-USB
connector
micro-USB
connector
2200 Back cover of None
the device
2300 Back of the
mount
Bottom of the
device
2400 Side of the
mount
Bottom of the
device
6
Turning the Device Off
1. Hold the Power key for four
seconds.
2. Touch Off.
Locking the Screen
This feature is only available on the
nüvi 2360. You can lock your screen
to prevent accidental screen touches.
1. Press and quickly release the
Power key.
2. Touch Lock.
Adjusting the Volume
1. Touch Volume.
2. Select an option:
• Move the slider from left to
right to adjust the volume.
• Touch Volume > to mute
all audio.
nüvi 2200/2300/2400 Series Owner’s Manual
Getting Started
Adjusting the Screen
Brightness
1. Touch Tools > Settings > Display
> Brightness.
2. Touch and move the scroll bar to
adjust screen brightness.
Using the On-Screen Buttons
• Touch and hold to quickly
return to the main menu.
• Touch and to see more
choices.
• Touch and hold and to
scroll faster.
nüvi 2200/2300/2400 Series Owner’s Manual
Using the On-Screen
Keyboard
See “System Settings” to change the
keyboard layout (page 49).
• Touch a character on the keyboard
to enter a letter or number.
• Touch
to add a space.
• Touch
to change the
character case.
• Touch between two characters to
select a letter.
• Touch to delete a character.
• Touch and hold to erase the
entire entry.
to select the keyboard
• Touch
language mode.
• Touch
to enter special
characters, such as punctuation
marks.
• Touch
to change character
capitalization.
7
Getting Started
Orienting the Screen
NOTE: Vertical (portrait) mode is
available on the nüvi 2360.
Rotate your device to view in
horizontal (landscape) or vertical
(portrait) mode.
8
nüvi 2200/2300/2400 Series Owner’s Manual
Getting Started
Main Menu
Using the Main Menu
➊
➋
➌
➍ ➎ ➏ ➐ ➑
• Touch ➊ to change the
transportation mode.
Routing is calculated
differently based on your
transportation mode.
• Touch ➋ to find a destination.
• Touch ➌ to view the map.
• Touch ➍ to stop a route.
• Touch ➎ to detour a route.
• Touch ➏ to make a call when
connected to a compatible
mobile phone.
nüvi 2200/2300/2400 Series Owner’s Manual
• See www.garmin.com
/bluetooth for information.
• Touch ➐ to adjust the volume.
• Touch ➑ to open the menu of
tools and settings.
About Main Menu
Customization
On 2400 models, you can create a
customized main menu by adding
icons from other screens on the
device, such as location categories or
frequently used tools. You can also
edit the size and position of the main
menu icons.
9
Getting Started
You can switch between the default
main menu and your customized
main menu.
Adding an Icon to the Custom
Main Menu
The main menu can contain up to 15
icons.
1. Touch Tools > Settings >
Custom Main Menu.
The icon is added to the custom
main menu.
TIP: Select to view additional
icons in a category.
4. Touch Save.
Editing the Main Menu Icons
Before you can edit icons, you must
create a customized main menu (page
10).
1. Touch Tools > Settings >
Custom Main Menu.
2. Select an icon on the page.
NOTE: The Where To?, View
Map, and Tools icons are
automatically included on the
main menu, and cannot be
deleted.
2. Touch
in the square you
would like to fill.
3. Touch an icon.
10
3. Touch an option.
• Touch
to delete the icon.
• Touch to enlarge the icon.
nüvi 2200/2300/2400 Series Owner’s Manual
Getting Started
The icon expands from one
cell to four cells.
NOTE: The main menu can fit
up to two large icons.
to shrink a large
• Touch
icon.
• Drag an icon across the screen
to move the icon.
4. Touch
> Save.
Choosing a Main Menu
You can switch between the default
main menu and your customized
main menu. Your customizations are
saved while you use the default main
menu.
1. Touch Tools > Settings >
Custom Main Menu.
2. Select Use Default Main Menu
or Use Custom Main Menu.
nüvi 2200/2300/2400 Series Owner’s Manual
11
Finding Locations
Finding Locations
The device offers many methods for
finding locations.
•
•
•
•
•
•
By category (page 12)
Near another location (page 14)
By spelling the name (page 16)
By address (page 16)
Using the map (page 17)
Using recently found locations
(page 17)
• Using coordinates (page 18)
• Using photos (page 18)
• Using Favorites (page 21)
12
About Points of Interest
The detailed maps loaded in your
device contain points of interest,
such as restaurants, hotels, and auto
services. Use the Points of Interest
function to browse for nearby
businesses and attractions.
Finding a Point of Interest by
Category
1. From the main menu, touch
Where To? > Points of Interest.
2. Select a category.
3. If necessary, select a subcategory.
4. Select a destination.
5. Touch Go!.
6. If necessary, select an option:
• Touch Drive.
• Touch Walk.
• Touch Public Transit to
calculate a route that combines
public transit and walking.
nüvi 2200/2300/2400 Series Owner’s Manual
Finding Locations
NOTE: You must have
cityXplorer™ maps loaded to
navigate using public transit
(page 31).
7. If necessary, select a route (page
20).
Searching Within a Category
To narrow your search results, you
can search within some categories.
1. From the main menu, touch
Where To? > Points of Interest.
2. Select a category.
3. If necessary, select a subcategory.
4. Touch .
5. Enter all or part of the name.
6. Touch Done.
nüvi 2200/2300/2400 Series Owner’s Manual
Adding a Stop While
Navigating a Route
Before you can add a stop, you must
be navigating a route in Automobile
mode.
1. While navigating a route, select
to return to the main menu.
2. Touch Where To?.
3. Search for the location (page 12).
4. Touch Go!.
5. Select an option:
• Touch Add to Current
Route.
• Touch Start New Route.
13
Finding Locations
Searching Near Another
Location
NOTE: The device automatically
searches for places near your present
location.
1. From the main menu, touch
Where To? >
> Near.
2. Touch an option.
3. Touch Save.
4. If, necessary, enter search
information.
5. Touch a destination.
Taking a Detour
While navigating a route, you can use
detours to avoid obstacles ahead of
you, such as construction zones.
NOTE: If the route you are currently
taking is the only reasonable option,
the device might not calculate a
detour.
1. While navigating a route, touch
to return to the main menu.
2. Touch Detour or Recalc.
Finding Parking
1. From the main menu, touch
Where To? > Parking > Find
Parking.
2. Touch a parking location.
3. Touch Go!.
Finding Your Last Parking Spot
From the main menu, touch
Where To? > Parking > Last
Spot.
14
nüvi 2200/2300/2400 Series Owner’s Manual
Finding Locations
Saving a Parking Spot
1. Touch Where To? > Parking.
2. Touch Parking or Last Spot.
3. Touch
> Save.
4. If necessary, enter a name.
Stopping the Route
While navigating a route, touch
> Stop.
Navigating Off Road
If you are not following roadways as
you navigate, use Off Road mode.
1. From the main menu, touch Tools
> Settings > Navigation.
2. Touch Automobile > nüRoute >
Calculation Mode > Off Road >
Save.
The route will be calculated as a
straight line to the location.
nüvi 2200/2300/2400 Series Owner’s Manual
Setting a Home Location
You can set your home location for
the location you return to most often.
1. From the main menu, touch
Where To? > Go Home.
2. Select Enter My Address,
Use My Current Location, or
Recently Found.
Going Home
Before you can navigate to home,
you must set a home location.
From the main menu, touch
Where To? > Go Home.
Resetting Your Home Location
1. From the main menu, touch
Where To? >
> Set Home
Location.
2. Select an option.
15
Finding Locations
Editing Your Home Location
Information
1. From the main menu, touch
Where To? > Favorites > Home.
2. Touch
> Edit.
3. Enter your changes.
4. Touch Done.
Location Searches
You can search for locations by using
the on-screen keyboard, entering the
location’s address or coordinates,
browsing the map, and more.
Finding a Location by
Spelling the Name
1. From the main menu, touch
Where To? > Points of Interest
> Spell Name.
2. Enter all or part of the name and
select Done.
3. Select a destination and select
Go!.
16
Finding an Address
NOTE: Depending on the version of
the built-in map data on your device,
the button names and the order of
steps could be different than the steps
below.
1. From the main menu, touch
Where To? > Address.
2. If necessary, change the state, the
country, or the province.
3. Touch Spell City.
4. Enter the city/postal code.
TIP: If you are unsure of the city/
postal code, select Search All.
5. Touch Done.
6. If necessary, select the city/postal
code.
NOTE: Not all map data provides
postal code searching.
7. Enter the number of the address.
8. Touch Done.
nüvi 2200/2300/2400 Series Owner’s Manual
Finding Locations
9. Enter the street name.
10.Touch Done.
11.If necessary, select the street.
12.If necessary, select the address.
Browsing the Map
• Touch Where To? > Browse
Map.
• See “Using the Location Map”
(page 19) for information on
using map buttons.
Viewing a List of Recently
Found Locations
Your device stores the last 50
locations you have found.
From the main menu, touch
Where To? > Recently Found.
Clearing the List of Recently
Found Locations
From the main menu, touch
Where To? > Recently Found >
> Clear > Yes.
Finding a Location Using the
Map
1. From the main menu, touch
Where To? > Browse Map.
2. Select a location.
An information box appears for
the location.
3. Touch the information box.
4. Touch Go!.
nüvi 2200/2300/2400 Series Owner’s Manual
17
Finding Locations
Entering Coordinates
If you know the geographic
coordinates of your destination, you
can use your device to navigate to
the destination using the latitude and
longitude coordinates. This can be
especially helpful when geocaching.
1. From the main menu, touch
Where To? > Coordinates.
2. Select a field to enter the latitude
and longitude data.
3. Touch View on Map.
4. Touch Go!.
Changing the Map Coordinate
Format
1. From the main menu, touch
Where To? > Coordinates >
Format.
2. Select a format.
18
Using Photo Navigation
You can upload pictures onto your
device or memory card that include
location information and create
routes to the pictured locations.
1. Connect your device to your
computer (page 47).
2. Go to http://connect.garmin.com
/photos.
3. Follow the instructions on the
Web site to select and load
pictures.
4. Disconnect the device from the
computer.
5. Turn on the device.
6. From the main menu, touch
Where To? > Favorites >
Photos.
A list of pictures with location
information appears.
7. Select a picture.
nüvi 2200/2300/2400 Series Owner’s Manual
Finding Locations
Using the Location Map
The location map opens after you
select a location from the Where To?
menu.
➊ ➋
➌
➏
➍
➐
➎
➑
• Touch ➊ to save the location to
your Favorites.
• On some models, touch ➊ to call
the selected location when the
device is connected to a phone.
• Touch ➋ to switch between 2-D
and 3-D views.
• Touch ➌ to rotate the view.
• Touch the information balloon ➍
to view more information for the
location.
• Touch ➎ to zoom in and out.
nüvi 2200/2300/2400 Series Owner’s Manual
• Touch ➏ to return to the previous
page.
• Touch and drag ➐ to view
different parts of the map.
• Touch ➑ to create a turn-by-turn
route to this location.
Viewing a Route on the Map
1. From the location map, touch the
information balloon.
2. Touch the route information box.
Removing an Incorrect Point
of Interest from the Map
If your search results contain an
outdated or incorrect point of interest,
you can remove the location from
future searches.
1. From the location map, touch the
information balloon.
2. Touch
> Report Error > Yes.
19
Finding Locations
Rating a Point of Interest
When available, you can view and
change the star rating for a point of
interest.
1. From the location map, touch the
information balloon.
If available, the star ratings
appear under the address of the
location.
2. Touch the stars to rate the point of
interest.
The star rating updates on your
device.
Editing a Phone Number
1. From the location map, touch the
information balloon.
2. Touch
> Edit Phone
Number.
3. Enter the correct phone number,
and touch Done.
20
Using Multiple Route Preview
NOTE: See (page 52) to enable
multiple route preview.
1. From the location map, touch Go!
and, if necessary, select Drive
(page 12).
A map appears with Faster Time,
Shorter Distance, and Less Fuel
routes highlighted.
2. Use the on-screen buttons to
select a route (page 7).
3. Touch Go!.
Setting a Simulated Location
1. From the main menu, touch Tools
> Settings > System > GPS
Simulator > On.
2. From the main menu, touch
Where To? > Browse Map.
3. Select an area on the map.
An information box appears for
the location.
nüvi 2200/2300/2400 Series Owner’s Manual
Finding Locations
4. Touch
> Set Location.
Favorites
You can save locations in your
Favorites so you can quickly find
them and create routes to them.
Your home location is also stored in
Favorites.
Saving Your Location to
Favorites
1. From the map, touch the vehicle
icon.
2. Touch Save.
3. Enter a name.
4. Touch Done.
The location is saved in Favorites.
Saving Locations to Favorites
1. Search for the location (page 12).
2. From the location map, touch
> Save > OK.
nüvi 2200/2300/2400 Series Owner’s Manual
Finding Favorites
1. From the main menu, touch
Where To? > Favorites.
2. If necessary, select a category.
3. Select a saved location.
Editing Favorites
1. From the main menu, touch
Where To? > Favorites.
2. If necessary, select a category.
3. Select a Favorite.
4. Touch
> Edit.
5. Select an option:
• Touch Name.
• Touch Phone Number.
• Touch Categories to enter
a category name for the
Favorite.
• Touch Change Photo to save
a photo with the Favorite
(page 39).
21
Finding Locations
• Touch Change Map Symbol
to change the symbol used to
mark the favorite on a map.
6 Edit the information.
7. Touch Done.
Deleting Favorites
1. From the main menu, touch
Where To? > Favorites.
2. If necessary, select a category.
3. Select a Favorite.
4. Touch
> Delete > Yes.
Planning a Trip
5. Touch Select.
6. Touch
to add additional
locations.
7. Touch Next.
8. Enter a name.
9. Touch Done.
Editing a Trip Itinerary
1. From the main menu, touch
Where To? > Trip Planner.
2. Touch a saved trip.
➋
You can use the trip planner to
create and save a trip with multiple
destinations.
➊
1. From the main menu, touch
Where To? > Trip Planner.
2. Touch .
3. Touch Select Start Location.
4. Search for a location (page 12).
3. Touch an option:
• Touch ➊ to change the
departure time, duration, or
arrival time.
22
nüvi 2200/2300/2400 Series Owner’s Manual
Finding Locations
• Touch ➋ to change the
transportation mode or route
preference for that portion of
the trip.
• Touch Map to view the trip on
the map.
Navigating to a Saved Trip
1. From the main menu, touch
Where To? > Trip Planner.
2. Select a saved trip.
3. Touch Go!.
4. If prompted, select a route (page
20).
• Touch Edit Destinations to
add and delete locations, or to
change the order of locations.
• Touch Delete Trip.
• Touch Optimize Order to
arrange the stops on your trip
in the most-efficient order.
Editing a Saved Trip
1. From the main menu, touch
Where To? > Trip Planner.
2. Select a saved trip.
3. Touch .
4. Select an option:
• Touch Rename Trip.
nüvi 2200/2300/2400 Series Owner’s Manual
23
Voice Command
Voice Command
About Voice Commands
NOTE: Voice Command is not
available for all languages and
regions.
Voice Command is available on the
nüvi 2360, 2370, and 2460.
Voice Command allows you to use
your device by speaking the words
you see on the screen or by speaking
certain commands. The Voice
Command menu provides a list of
available commands to use.
24
Setting your Wakeup Phrase
The wakeup phrase is a word or
phrase you can say to activate Voice
Command. The default wakeup
phrase is Voice Command.
1. From the main menu, touch Tools
> Voice Command > Customize
Phrase.
2. Enter a new wakeup phrase.
3. Touch Done.
Activating Voice Command
Say your wakeup phrase.
The Voice Command menu
appears.
nüvi 2200/2300/2400 Series Owner’s Manual
Voice Command
Tips for Using Voice
Commands
• Speak in a normal voice directed
at the device.
• Say commands as they appear on
the screen.
• Respond to voice prompts from
the device as needed.
• Increase the length of your
wakeup phrase to reduce the
number of accidental Voice
Command activation.
• Say Exit to exit Voice Command.
• The device sounds two tones
when it enters and exits voice
command mode.
• When
appears in the
upper-right corner of the screen,
the device is not ready for your
command.
nüvi 2200/2300/2400 Series Owner’s Manual
appears, you can say a
• When
command.
Navigating to a Popular
Location Using Voice
Commands
You can say the names of popular,
well-known locations.
1. Say your wakeup phrase.
2. Say Find by Name.
3. Listen for the voice prompt, and
speak the name of the location.
A list of locations appears.
25
Voice Command
4. Say the line number.
5. Say an option:
• Say Navigate to navigate to
the location.
• Say Call to call the location
when connected to a
compatible mobile phone.
Finding an Address
1. Say Voice Command.
2. Say Find Address.
3. Follow the on-screen instructions.
1. From the main menu, touch Tools
> Voice Command > .
2. Touch Mute Instructions >
Enabled.
Disabling Voice Command
You can disable voice command,
which prevents you from accidentally
opening the voice command while
speaking.
1. From the main menu, touch Tools
> Voice Command > .
2. Touch Voice Command >
Disabled.
Muting Instructions
You can disable the voice prompts
for Voice Command without muting
the device.
26
nüvi 2200/2300/2400 Series Owner’s Manual
Map Pages
Map Pages
Viewing the Map While
Navigating
notice
The speed limit icon feature is for
information only and does not replace
the driver’s responsibility to abide by
all posted speed limit signs and to use
safe driving judgment at all times.
Garmin will not be responsible for
any traffic fines or citations that you
may receive for failing to follow all
applicable traffic laws and signs.
The route is marked with a magenta
line. A checkered flag marks your
destination.
As you travel, the device guides you
to the destination with voice prompts,
arrows on the map, and directions
at the top of the map. If you depart
from the original route, the device
nüvi 2200/2300/2400 Series Owner’s Manual
recalculates the route and provides
new directions.
An icon displaying the current speed
limit may appear as you travel on
major roadways.
Changing the Map Data Field
1. From the map, touch the data field
in the lower left-hand corner.
2. Select a type of data to display.
3. Touch Save.
Changing the Speed Limit
1. From the map, touch the Speed
Limit Icon.
2. Touch
and
to
change the speed limit.
27
Map Pages
Using myTrends
The myTrends™ feature senses
when you are driving to a common
destination and displays the
destination and estimated time of
travel in the navigation bar on the
map.
1. From the main menu, touch Tools
> Settings > Navigation.
2. Touch Automobile > nüRoute >
myTrends > Enabled.
3. Save a common destination, like
your home or workplace, as a
Favorite (page 21).
4. With the device on, drive to the
Favorite several times.
5. When myTrends information
appears in the navigation bar,
touch it to view route information.
28
Viewing Trip Information
The trip information page displays
your present speed and provides
statistics about your trip.
TIP: If you make frequent stops,
leave the device turned on so it can
accurately measure elapsed time
during the trip.
From the map, touch the Speed
field.
nüvi 2200/2300/2400 Series Owner’s Manual
Map Pages
Resetting Trip Information
1. From the map, touch the Speed
field > .
2. Select an option:
• When not navigating a route,
touch Reset All to reset
every data field, except the
speedometer, on the page.
• Touch Reset Trip Data to
reset the information on the
trip computer.
• Touch Reset Max. Speed to
reset the maximum speed.
• Touch Reset Trip B to reset
the odometer.
nüvi 2200/2300/2400 Series Owner’s Manual
Viewing the Turn List
When you are navigating a route,
you can view all of the turns for your
entire route and the distance between
turns.
1. Touch the text bar on the top of
the map.
2. Select an option:
• Select a turn on the list to
view the next turn.
• On nüvi 2400 models, if a
traffic receiver is connected,
touch a colored dot for
information about a traffic
delay (page 42).
29
Map Pages
• Touch
> Show Map to
view the entire route on the
map.
Viewing the Next Turn
Before you can view the next turn,
you must be navigating a route.
About Upcoming Junctions
On some models, as you approach a
junction while navigating a route, a
junction view may appear (page 1).
The next turn shows the turn on the
map and the distance and time left
before you reach the turn.
From the map, touch
30
.
nüvi 2200/2300/2400 Series Owner’s Manual
Map Pages
Using the Pedestrian
Navigation Map
In Pedestrian mode, your route is
displayed on a two-dimensional map.
➊
➌
➋
➊
➍
• Touch ➊ to switch between
sections of the route.
• Touch ➋ to view the route
itinerary.
• Touch ➌ to center the map on
your current location.
• Touch ➍ to zoom in and zoom
out.
nüvi 2200/2300/2400 Series Owner’s Manual
Public Transit Options
If you have cityXplorer maps
installed, the device calculates a route
that uses a combination of public
transit options, such as riding a bus or
subway, and walking.
cityXplorer maps are not included
with the device. See
http://my.garmin.com to purchase
cityXplorer maps.
The yellow icons indicate the
navigation method used in each
section of the route. For example,
when you see , board a bus at that
point in the route.
The black dots on the map are public
transit stops along your route.
NOTE: You can limit the distance
spent walking during a pedestrian
route (page 51).
31
Hands-Free Phone Calls
Hands-Free Phone
Calls
Bluetooth® technology is available
on some nüvi models. Bluetooth
technology establishes a wireless
link between two devices, such as
a mobile phone and your device.
To determine whether your mobile
phone with Bluetooth technology
is compatible with the device, go to
www.garmin.com/bluetooth.
About Pairing the
Devices
The first time you use two devices
together, you must pair them by
establishing a relationship using a
PIN or passkey.
The phone and the device must be
turned on and be within 33 ft. (10 m)
of each other.
32
Pairing Using the Phone
Settings
You can initiate pairing from
your phone. Refer to your phone
instructions.
1. From the main menu of the
nüvi, touch Tools > Settings
> Bluetooth > Bluetooth >
Enabled > Save.
2. Enable the Bluetooth component
on your phone.
NOTE: This might be in a
menu called Settings, Bluetooth,
Connections, or Hands-free.
3. Search for Bluetooth devices
using your phone.
4. Select the device from the list of
devices.
5. Enter the device Bluetooth PIN
(1234) into your phone.
nüvi 2200/2300/2400 Series Owner’s Manual
Hands-Free Phone Calls
Pairing Using the Device
Settings
1. From the main menu of the
device, touch Tools > Settings
> Bluetooth > Bluetooth >
Enabled > Save.
2. Touch Add Phone > OK.
3. Enable the Bluetooth component
on your phone.
4. Enable Find Me/Discoverable/
Visible mode on your phone.
NOTE: This might be in a
menu called Settings, Bluetooth,
Connections, or Hands-free.
A prompt to pair the phone with
your device appears on the phone.
5. Touch OK on the device.
6. Select your phone from the list of
devices.
7. Touch OK.
8. Enter the device Bluetooth PIN
(1234) in your phone.
nüvi 2200/2300/2400 Series Owner’s Manual
Tips After Pairing the Devices
• After the initial pairing, the two
devices can connect automatically
each time you turn them on.
• When your phone is connected
to your device, you are ready to
make phone calls.
• When you turn on the device, it
tries to connect to the last phone
to which it was connected.
Receiving a Call
• Touch Answer.
• Touch Ignore to ignore the call.
33
Hands-Free Phone Calls
Using the Device During a Call
During a call, appears. Depending
on the screen shown on your device,
the In Call icon could look different.
1. Touch >.
2. Select an option:
• Touch Keypad to view
a keypad page for using
automated systems such as
voice mail.
• Touch Handset to turn off the
device but remain on the call,
or if you need privacy.
• To switch back, touch
Handsfree.
• Touch Mute to turn off the
sound on a call.
• Touch End Call to end the
call.
34
Dialing a Point of Interest
1. From the main menu, touch
Phone > Points of Interest.
2. Search for a point of interest.
3. Touch Call.
Dialing a Number
1. From the main menu, touch
Phone > Dial.
2. Enter the number.
3. Touch Dial.
Entering Your Phone Number
You can enter the phone number you
want the device to call when you
touch Call Home.
1. From the main menu, touch
Phone > Call Home.
2. Touch Enter Phone Number.
3. Enter the phone number.
4. Touch Done > Yes.
The device dials your home
phone number.
nüvi 2200/2300/2400 Series Owner’s Manual
Hands-Free Phone Calls
Calling Home
Before you can call home using the
Call Home button, you must enter
a phone number for your home
location.
From the main menu, touch
Phone > Call Home.
Placing Calls Using Voice Dial
Before you can place calls using
voice dial, you may need to train
your phone to recognize your voice
dial commands. Refer to your phone
instructions.
Calling a Contact
You can call the numbers saved on
your phone from your device.
1. Touch Phone > Phone Book.
2. Touch a contact.
Checking the Phone Status
You can check the battery level and
signal strength for your phone.
From the main menu, touch
Phone > Phone Status.
1. From the main menu, touch
Phone > Voice Dial.
2. Speak the contact name.
nüvi 2200/2300/2400 Series Owner’s Manual
35
Using the Tools
Using the Tools
Viewing Current
Location Information
Use the Where Am I? page to view
information about your current
location. This feature is helpful if
you need to tell emergency personnel
your location.
From the main menu, touch Tools
> Where Am I?.
Finding Nearby Services
1. From the main menu, touch Tools
> Where Am I?.
2. Touch Hospitals, Police Stations,
or Fuel to view the nearest
locations in that category.
Using Help
From the main menu, touch Tools
> Help to view information about
using the device.
36
Searching Help Topics
From the main menu, touch Tools
> Help > .
About ecoRoute
The ecoRoute™ feature calculates
the vehicle fuel economy, carbon
footprint, and the fuel price of
navigating to a destination, and offers
tools for improving fuel efficiency.
The data provided by the ecoRoute
feature are estimates only. The data
is not actually read from the vehicle.
To receive more-accurate fuel reports
for your specific vehicle and driving
habits, calibrate the fuel economy
(page 37).
ecoRoute HD Accessory
When connected to the ecoRoute HD
accessory, your device can receive
real-time vehicle information, such
as error messages, RPM, and battery
voltage, and you can reset the check
nüvi 2200/2300/2400 Series Owner’s Manual
Using the Tools
engine light. Go to www.garmin
.com/ecoroute for compatibility and
purchasing information.
Using ecoRoute
1. From the main menu, touch Tools
> ecoRoute.
2. If prompted, enter fuel and
mileage information.
The first time you use the
ecoRoute features, you must enter
vehicle information.
Calibrating the Fuel Economy
You can calibrate the fuel economy
to receive more-accurate fuel reports
for your specific vehicle and driving
habits. You should calibrate when
you fill up your fuel tank.
1. From the main menu, touch Tools
> ecoRoute > At the Pump.
2. Enter the current fuel price.
nüvi 2200/2300/2400 Series Owner’s Manual
3. Enter how much fuel the vehicle
has used since the last fill up.
4. Enter the distance you have
traveled since the last fill up.
5. Touch Next.
The device calculates the average
vehicle fuel economy.
About the ecoChallenge
The ecoChallenge helps you
maximize the vehicle fuel economy
by scoring your driving habits. The
higher your ecoChallenge scores,
the more fuel you have saved. The
ecoChallenge collects data and
calculates a score whenever your
device is moving and in Automobile
transportation mode.
Viewing ecoChallenge Scores
From the main menu, touch Tools
> ecoRoute > ecoChallenge.
37
Using the Tools
About the ecoChallenge Score
The leaf color on the ecoChallenge
icon changes depending on your
performance in the challenge.
• Overall—displays an average
of the speed, acceleration, and
braking score.
• Speed—displays your score
for driving your vehicle at the
optimal speed for conserving fuel
(45–60 mph for most vehicles).
• Acceleration—displays your
score for smooth and gradual
acceleration. You lose points for
rapid acceleration.
• Braking—displays your score for
smooth and gradual braking. You
lose points for hard braking.
Removing the ecoChallenge
Score From the Map
From the map, touch
Settings > Hide.
38
>
Resetting the ecoChallenge
From the map, touch
Reset.
>
>
Viewing Fuel Economy
Information
1. From the main menu, touch Tools
> ecoRoute > Fuel Economy.
2. Select a section of the graph to
zoom in.
Adjusting the Vehicle Profile
1. From the main menu, touch Tools
> ecoRoute > Vehicle Profile.
2. Select an option to manually
adjust the fuel settings:
• Fuel Type
• City Fuel Economy
• Hwy. Fuel Economy
• Fuel Price
>
nüvi 2200/2300/2400 Series Owner’s Manual
Using the Tools
TIP: For best results, calibrate the
fuel economy (page 37) instead
of adjusting the city and highway
fuel efficiency.
About the Mileage Report
Mileage reports provide the distance,
the time, the average fuel economy,
and the fuel cost of navigating to a
destination.
A mileage report is created for every
route that you drive. If you stop
a route on the device, a mileage
report is created for the distance you
traveled.
Viewing a Mileage Report
You can view saved mileage reports
on the device. You can also access
mileage reports in the Reports folder
on the device drive/volume (page
47).
1. From the main menu, touch Tools
> Mileage Report.
nüvi 2200/2300/2400 Series Owner’s Manual
2. Select a report.
Resetting ecoRoute Data
1. From the main menu, touch Tools
> ecoRoute.
2. Select a category.
3. Touch > Reset.
Using the Picture Viewer
View pictures that you have stored in
the device or on a memory card. See
page 47 for more information about
loading pictures on the device.
From the main menu, touch Tools
> Picture Viewer.
• Use the arrows to scroll
through the images.
• Select a picture to view a
larger image of it.
• Touch to view a slide show
of the pictures.
• Touch the screen to stop the
slide show.
39
Using the Tools
Setting a Picture as Wallpaper
1. From the main menu, touch Tools
> Picture Viewer.
2. Select a picture.
3. Touch > Set as Wallpaper.
4. Use the on-screen buttons to
adjust the wallpaper.
5. Touch Save.
Deleting Pictures
1. From the main menu, touch Tools
> Picture Viewer.
2. Select a picture.
3. Touch > Delete > Yes.
Using the World Clock
1. From the main menu, touch Tools
> World Clock.
2. Select a city name.
3. Enter a new city name.
4. Touch Done.
5. If necessary, select a city.
40
Viewing the World Clock
From the main menu, touch Tools
> World Clock > .
Nighttime hours appear in the
shaded area of the map.
Using the Calculator
From the main menu, touch Tools
> Calculator.
Capturing Screenshots
1. From the main menu, touch
Tools > Settings > Display >
Screenshot > Enabled.
2. Touch to take a screenshot.
The picture bitmap file is saved in
the screenshots folder on the device
drive (page 47).
nüvi 2200/2300/2400 Series Owner’s Manual
Using the Tools
Using the Unit Converter
1. From the main menu, touch Tools
> Unit Converter.
2. Select the box next to Convert,
select a unit of measure, and
touch Save.
Two units of measure appear.
3. Select a unit of measure to
convert, and touch Save.
4. Select a second unit of measure,
and touch Save.
5. Enter a value.
6. Touch Done.
nüvi 2200/2300/2400 Series Owner’s Manual
Setting Currency Conversion
Rates Manually
You can update the currency
conversion rates manually so that you
are always using the most-current
rates.
1. From the main menu, touch Tools
> Unit Converter.
2. Select the box next to Convert.
3. Select Currency, then select
Save.
4. Select the box at the bottom of the
screen that lists the currency rate.
5. Select the box next to a currency.
6. Enter a value, and touch Done.
7. Touch Done.
41
Traffic
Traffic
NOTICE
Garmin is not responsible for the
accuracy or timeliness of the traffic
information.
This device can receive FM Traffic
Message Channel (TMC) traffic
content, which provides information
on nearby traffic incidents and
construction. Some models are
packaged with a FM TMC traffic
receiver, built into the vehicle power
cable, and have a lifetime traffic
subscription. The subscription is
automatically enabled and does not
require an additional subscription
purchase to activate.
For information about traffic
receivers and coverage areas, go to
www.garmin.com/traffic.
42
Subscription Activation
You do not need to activate the
subscription included with your FM
traffic receiver. The subscription
activates automatically after your
device acquires satellite signals while
receiving traffic signals from the pay
service provider.
Lifetime Subscriptions
Some models include subscriptions to
lifetime features.
LT
This model includes a
lifetime traffic subscription
and a traffic receiver.
LMT
This model includes
a nüMaps Lifetime™
subscription, lifetime traffic
subscription (page 62), and
a traffic receiver.
nüvi 2200/2300/2400 Series Owner’s Manual
Traffic
Traffic Receiver
➊
➋
➌
Receiving Traffic
Information
➍
➎
➊
Mini-USB connector
➋
External antenna connector
➌
Internal antenna
➍
Power LED
➎
Vehicle power adapter
nüvi 2200/2300/2400 Series Owner’s Manual
When the receiver is within a traffic
coverage area your device will begin
displaying traffic information.
The traffic receiver and the
device must be in data range of
an FM station transmitting traffic
information.
1. Connect the traffic receiver to an
external power source.
2. Connect the traffic receiver to the
device.
NOTE: Heated (metallized)
windshields could degrade the
performance of the traffic receiver.
43
Traffic
About the Traffic Icon
When you are receiving traffic
information, a traffic icon appears
on the map. The traffic icon changes
color to indicate the severity of traffic
conditions.
Color Severity
Green Low
Yellow Medium
Red
High
Gray
No data
44
Meaning
Traffic is flowing
freely.
Traffic is moving
but there is a
delay. There is
moderate traffic
congestion.
Traffic is not
moving or
moving very
slowly. There is
a severe delay.
Traffic
information is
not available.
Traffic on Your Route
When calculating your route, the
device examines the current traffic
and automatically optimizes the
route for the shortest time. If a severe
traffic delay occurs on your route
while you are navigating, the device
automatically recalculates the route.
You might still be routed through
traffic if no better alternative routes
exist.
Manually Avoiding Traffic on
Your Route
1. From the map, touch .
2. Touch Traffic On Route.
3. If necessary, use the arrows to
view other traffic delays on your
route.
4. Touch
> Avoid.
nüvi 2200/2300/2400 Series Owner’s Manual
Traffic
Viewing the Traffic Map
The traffic map shows color-coded
traffic flow and delays on nearby
roads.
1. From the map, touch .
2. Touch Traffic Map to view the
traffic incidents on a map.
Searching for Traffic Delays
1. From the map page, touch .
2. Touch Traffic Search to view a
list of roads with traffic delays.
3. Select an item in the list to view
delays on the road.
4. If there is more than one delay,
use the arrows to view additional
delays.
nüvi 2200/2300/2400 Series Owner’s Manual
Adding a Subscription
You can purchase traffic subscriptions
for other regions or countries.
1. From the main menu, touch Tools
> Settings > Traffic.
2. Select an option:
• For non-North American
units, touch Subscriptions
> .
• For North American units,
touch .
3. Write down the FM traffic
receiver unit ID.
4. Go to www.garmin.com/fmtraffic
to purchase a subscription and get
a 25-character code.
5. Touch Next on the device.
6. Enter the code.
7. Touch Done.
The traffic subscription code cannot
be reused. You must obtain a new
45
Traffic
code each time you renew your
service. If you own multiple FM
traffic receivers, you must obtain a
new code for each receiver.
Viewing Offers
About Offers
1. Select an offer that appears on the
screen to search for the nearest
location related to that offer.
2. If the offer includes an icon, touch
the icon on the location map to
receive a coupon code.
3. Write down this code and present
it when you arrive at the location.
If your device package includes a
traffic receiver, you will receive
location-relevant offers and coupons.
Ad-based traffic information is only
available in North America.
The traffic receiver must be
connected to external power and you
must be in a coverage area to receive
ad-based traffic information.
See our privacy statement at www
.garmin.com/privacy/ for important
privacy information.
‹ CAUTION
Do not attempt to write down the
coupon codes while driving.
Viewing an Offer List
From the main menu, touch Tools
> Offers.
Disabling Traffic and Offers
In order to disable offers, you must
disable traffic.
From the main menu, touch Tools
> Settings > Traffic > Disabled.
46
nüvi 2200/2300/2400 Series Owner’s Manual
Data Management
Data Management
You can store files, such as JPEG
image files, on your device. The
device has a memory card slot for
additional data storage.
NOTE: The device is not compatible
with Windows® 95, 98, Me, Windows
NT®, and Mac® OS 10.3 and earlier.
File Types
The device supports the following
file types:
• JPEG and JPG image files (page
39)
• Maps and GPX waypoint files
from MapSource® (page 63)
• GPI custom POI files from
Garmin POI Loader (page 63)
About Memory Cards
You can purchase memory cards from
an electronics supplier, or purchase
pre-loaded Garmin mapping software
(www.garmin.com/trip_planning).
In addition to map and data storage,
the memory card can be used to
store files such as maps, images,
geocaches, routes, waypoints, and
custom POIs.
The device supports microSD™ and
microSDHC flash memory cards.
Installing a Memory Card
1. Insert a memory card into the slot
on the device.
2. Press it in until it clicks.
Transferring Files To
Your Computer
1. Connect the device to your
computer (page 4).
nüvi 2200/2300/2400 Series Owner’s Manual
47
Data Management
2.
3.
4.
5.
6.
Your device and memory card
appear as removable drives in
My Computer in Windows and
as mounted volumes on Mac
computers.
NOTE: Some computers with
multiple network drives cannot
display nüvi drives. See your
operating system Help file to
learn how to map the drives.
Browse your computer for a file.
Highlight the file.
Click Edit > Copy.
Open the “Garmin” or memory
card drive or volume.
Select Edit > Paste.
The file appears in the list of files
in the device memory or on the
memory card.
Disconnecting the USB Cable
1. Complete an action.
48
• For Windows computers, click
the eject icon
in your
system tray.
• For Mac computers, drag the
volume icon to the Trash .
2. Disconnect the cable from your
computer.
Deleting Files
NOTICE
If you do not know the purpose of
a file, do not delete it. Your device
memory contains important system
files that should not be deleted.
1. Open the “Garmin” drive or
volume.
2. If necessary, open a folder or
volume.
3. Select a file.
4. Press the Delete key on your
keyboard.
nüvi 2200/2300/2400 Series Owner’s Manual
Customizing the Device
Customizing the
Device
1. From the main menu, touch Tools
> Settings.
2. Select a setting category.
3. Select the setting to change it.
System Settings
From the main menu, touch Tools >
Settings > System.
• GPS Simulator—stops the
device from receiving a GPS
signal, and saves battery power.
• Units—allows you to change the
units of measure for distance.
• Time Format—allows you to
select a 12-hour, 24-hour, or UTC
display time.
• Current Time—allows you to
manually change the time.
nüvi 2200/2300/2400 Series Owner’s Manual
• Safe Mode—disables all
functions that require significant
operator attention and could
become a distraction while
driving.
• Garmin Lock—locks the device
(page 59).
• About—displays the software
version number, the unit ID
number, and information on
several other software features.
NOTE: You need this information
when you update the system
software or purchase additional
map data (page 63).
• EULAs: displays the End User
License Agreements.
49
Customizing the Device
Navigation Settings
Automobile Navigation
Settings
From the main menu, touch
Tools > Settings > Navigation >
Automobile.
• nüRoute™—changes advanced
routing preferences (page 51).
• Map Detail—sets the level of
detail on the map. More detail
may cause the map to draw
slower.
• Map View—sets the perspective
on the map.
• Map Theme—changes the color
of the map data.
• Map Data Layout—changes
the amount of data visible on the
map.
50
• Vehicle—changes the icon to
represent your position on the
map. Go to www.garmingarage
.com for more icons.
• Trip Log
◦◦ Show on Map—displays the
path of your travels on the
map.
◦◦ Clear Trip Log
Changing the Map Perspective
1. From the main menu, touch
Tools > Settings > Navigation >
Automobile > Map View.
2. Select an option:
• Touch Track Up to display
the map in two dimensions
(2-D), with your direction of
travel at the top.
• Touch North Up to display
the map in 2-D with North at
the top.
nüvi 2200/2300/2400 Series Owner’s Manual
Customizing the Device
• Touch 3-D to display the map
in three dimensions.
Pedestrian Navigation
Settings
From the main menu, touch Tools >
Settings > Navigation > Pedestrian.
• Limit Walking—controls how
much of a pedestrian route will
include walking.
• Public Transit—avoids selected
transit types.
• Trip Log—displays the path of
your travels on the map.
◦◦ Show on Map—displays the
path of your travels on the
map.
◦◦ Clear Trip Log
Avoiding Transit Types
NOTE: Transit types are available
when cityXplorer maps are loaded
(page 31).
1. From the main menu, touch
Tools > Settings > Navigation >
Pedestrian > Public Transit.
2. Select the transit type to avoid on
your routes.
3. Touch Save.
Route Preferences
From the main menu, touch Tools >
Settings > Navigation > Automobile
> nüRoute > Calculation Mode.
The route calculation is based on
road speeds and vehicle acceleration
data for a given route.
• Faster Time—calculates routes
that are faster to drive but can be
longer in distance.
nüvi 2200/2300/2400 Series Owner’s Manual
51
Customizing the Device
• Shorter Distance—calculates
routes that are shorter in distance
but can take more time to drive.
• Less Fuel—calculates routes
that could use less fuel than other
routes.
• Prompted—prompts you to
select a route calculation mode
before navigating (page 20).
• Off Road—calculates a direct
line from your location to your
destination.
Avoiding Road Features
1. From the main menu, touch
Tools > Settings > Navigation
> Automobile > nüRoute >
Avoidances.
2. Select the road features to avoid
on your routes.
3. Touch Save.
52
Adding a Custom Avoidance
You can set your device to avoid
certain areas or roads when
calculating routes.
1. From the main menu, touch
Tools > Settings > Navigation
> Automobile > nüRoute >
Custom Avoidances.
2. If necessary, touch Add New
Custom Avoidance.
2. Select an option:
• Touch Add Avoid Area. The
avoided area is in the shape of
a rectangle.
• Touch Add Avoid Road.
3. Follow on-screen instructions.
4. Touch Done.
nüvi 2200/2300/2400 Series Owner’s Manual
Customizing the Device
Editing a Custom Avoidance
1. From the main menu, touch
Tools > Settings > Navigation
> Automobile > nüRoute >
Custom Avoidances.
2. Select a custom avoidance.
3. Touch , then select an option.
• Touch Rename.
• Touch Delete.
Disabling a Custom
Avoidance
If you disable a custom avoidance,
the device will calculate routes using
that area or road.
1. From the main menu, touch
Tools > Settings > Navigation
> Automobile > nüRoute >
Custom Avoidances.
2. Select a custom avoidance.
3. Touch
> Disable.
nüvi 2200/2300/2400 Series Owner’s Manual
Using Advanced Detours
Use this feature to detour around a
specific section of your trip while you
navigate.
1. From the main menu, touch
Tools > Settings > Navigation
> Automobile > nüRoute >
Advanced Detours > Enabled.
2. Select a destination, and touch
Go! (page 12).
3. From the main menu, touch
Detour.
4. Select a detour option:
• Next 1/2 mile on Route.
• Next 2 miles on Route.
• Next 5 miles on Route.
• Detour by Road(s) on Route.
5. If necessary, select a road to
detour around.
53
Customizing the Device
About trafficTrends
When the trafficTrends™ feature is
enabled, your device uses historic
traffic information to calculate moreefficient routes. Different routes may
be calculated based on traffic trends
for the day of the week or based on
the time of day.
Enabling trafficTrends
1. From the main menu, touch
Tools > Settings > Navigation
> Automobile > nüRoute >
trafficTrends > Enabled.
54
Display Settings
From the main menu, touch Tools >
Settings > Display.
• Color Mode—sets a light
background (Day), a dark
background (Night), or
automatically switches between
the two based on the sunrise
time and the sunset time for your
current location (Auto).
• Brightness—changes the
brightness of the screen.
Decreasing the brightness can
save battery power.
• Screenshot—allows you to take a
picture of the device screen (page
40).
nüvi 2200/2300/2400 Series Owner’s Manual
Customizing the Device
Language Settings
Viewing Map Information
• Voice Language—sets the
language for voice prompts.
• Text Language—sets all
on-screen text to the selected
language.
NOTE: Changing the text
language does not change the
language of user-entered data or
map data, such as street names.
• Keyboard Language—sets the
language for your keyboard.
• Keyboard Layout—sets the
keyboard layout.
Enabling Maps
1. From the main menu, touch Tools
> Settings > myMaps.
2. Select a map.
From the main menu, touch Tools >
Settings > Language.
nüvi 2200/2300/2400 Series Owner’s Manual
From the main menu, touch Tools
> Settings > myMaps.
Bluetooth Settings
From the main menu, touch Tools >
Settings > Bluetooth.
• Add Phone or Phone
• Bluetooth—enables the
Bluetooth component.
The Bluetooth icon appears on
the main menu if the Bluetooth
component is turned on.
• Friendly Name—allows you
to enter a friendly name that
identifies your nüvi on devices
with Bluetooth technology.
55
Appendix
Managing the Bluetooth
Device List
You can add, disconnect, or delete
phones that your device detects while
Bluetooth is enabled.
1. From the main menu, touch Tools
> Settings > Bluetooth > Phone.
2. Select an option:
• Select a phone for your device
to connect with.
• Touch to add a phone to
the menu.
• Touch to delete a phone
from the device memory.
• Touch None to drop your
current connection.
Enabling Traffic
The traffic receiver is included in
some device packages.
56
From the main menu, touch Tools
> Settings > Traffic > Traffic >
Enabled.
About Traffic Subscriptions
You can purchase additional
subscriptions or a renewal if your
subscription expires. Go to
www.garmin.com/fmtraffic.
Viewing Traffic Subscriptions
From the main menu, touch
Tools > Settings > Traffic >
Subscriptions.
Restoring Settings
1. From the main menu, touch Tools
> Settings.
2. If necessary, select a settings
category.
3. Select > Restore > Yes.
nüvi 2200/2300/2400 Series Owner’s Manual
Appendix
Appendix
Power Cables
Your device can be powered three
ways.
• Vehicle power cable
• USB cable (included with some
models)
• AC adapter (optional accessory)
About GPS Satellite
Signals
The device must acquire satellite
signals in order to navigate.
When the device has acquired
satellite signals, the signal strength
bars on the main menu are green
. When it loses satellite signals,
the bars turn red or clear
.
Caring for Your Device
notice
Avoid dropping your device and
operating it in high-shock and highvibration environments.
Do not expose the device to water.
Contact with water can cause this
device to malfunction.
Do not store the device where
prolonged exposure to extreme
temperatures can occur, because it
can cause permanent damage.
Never use a hard or sharp object to
operate the touchscreen, or damage
may result.
For more information about GPS, go
to www.garmin.com/aboutGPS.
nüvi 2200/2300/2400 Series Owner’s Manual
57
Appendix
Cleaning the Outer Casing
notice
Avoid chemical cleaners and solvents
that can damage plastic components.
1. Clean the outer casing of the
device (not the touchscreen) using
a cloth dampened with a mild
detergent solution.
2. Wipe the device dry.
Cleaning the Touchscreen
1. Use a soft, clean, lint-free cloth.
2. If necessary, use water, isopropyl
alcohol, or eyeglass lens cleaner.
3. Apply the liquid to the cloth.
4. Gently wipe the screen with the
cloth.
58
Avoiding Theft
• Remove the device and mount
from sight when not in use.
• Remove the residue left on the
windshield by the suction cup.
• Do not keep your unit in the glove
compartment.
• Register your device at
http://my.garmin.com.
• Use the Garmin Lock™ feature
(page 59).
nüvi 2200/2300/2400 Series Owner’s Manual
Appendix
Locking the Device
Garmin Lock is a theft-deterrent
system that locks your device. Each
time you turn on the device, you must
enter the PIN or drive to the security
location.
1. From the main menu, touch Tools
> Settings > System > Garmin
Lock > Lock Device > Enabled.
2. Enter a 4-digit PIN twice.
3. Drive to a security location.
4. Touch Set.
Changing Your Garmin Lock
PIN
1. From the Garmin Lock menu,
touch Change PIN.
2. Enter a new 4-digit PIN twice.
nüvi 2200/2300/2400 Series Owner’s Manual
Changing Your Security
Location
1. From the Garmin Lock menu,
Security Location.
2. Drive to the new security
location.
3. Touch Set.
About the Security Location
Your security location should be a
location you return to often, such as
your home. If the device has satellite
signals and you are at the security
location, you do not need to enter
the PIN.
NOTE: If you forget your PIN and
your security location, you must
send your device to Garmin to get
it unlocked. You must also send a
valid product registration or proof of
purchase.
59
Appendix
Erasing User Data
1. Turn the device on.
2. Hold your finger on the lowerright corner of the device screen.
3. Keep your finger pressed until the
pop-up window appears.
4. Touch Yes to clear all user data.
All original settings are restored. Any
items that you have saved are erased.
Maximizing the Battery Life
• Press and quickly release the
Power key to lock the screen.
• From the main menu, touch
Tools > Settings > Display >
Brightness to turn down the
backlight.
• Do not leave your device in direct
sunlight.
• Avoid prolonged exposure to
excessive heat.
60
Changing the Fuse in the
Vehicle Power Cable
notice
When replacing the fuse, do not lose
any of the small pieces and make
sure they are put back in the proper
position. The vehicle power cable
does not work unless it is assembled
correctly.
If your device does not charge
in your vehicle, you may need to
replace the fuse located at the tip of
the vehicle adapter.
1. Unscrew the end piece.
TIP: You may need to use a coin
to remove the end piece.
2. Remove the end piece, the silver
tip, and the fuse (glass and silver
cylinder).
3. Install an 1 A fast-blow fuse.
nüvi 2200/2300/2400 Series Owner’s Manual
Appendix
4. Place the silver tip in the end
piece.
5. Screw the end piece back into the
vehicle power cable.
Mounting on Your
Dashboard
Notice
The permanent mounting adhesive is
extremely difficult to remove after it
is installed.
Use the enclosed mounting disk to
mount your device to the dashboard
and comply with certain state
regulations.
4. Remove the clear plastic cover
from the top of the disk.
5. Place the suction cup mount on
top of the disk.
6. Flip the lever down (toward the
disk).
Removing the Device,
Cradle, and Mount
Removing the Device from
the Cradle
1. Press up on the tab on the top of
the cradle.
2. Tilt the device forward.
1. Clean and dry the dashboard
where you are placing the disk.
2. Remove the backing from the
adhesive on the bottom of the
disk.
3. Place the disk on the dashboard.
nüvi 2200/2300/2400 Series Owner’s Manual
61
Appendix
Removing the Cradle from the
Mount
1. Turn the cradle to the right or left.
2. Apply pressure until the socket on
the cradle releases the ball on the
mount.
Removing the Suction Cup
Mount from the Windshield
1. Flip the lever on the suction cup
mount toward you.
2. Pull the tab on the suction cup
toward you.
62
About nüMaps Lifetime
For a one-time payment, you can
receive up to four map updates each
year for the life of your device.
For more information on nüMaps
Lifetime and complete terms and
conditions, go to www.garmin.com,
and click on Maps.
Some models include subscriptions
nüMaps Lifetime.
LM
This model includes
a nüMaps Lifetime
subscription.
LMT This model includes
a lifetime traffic
subscription, nüMaps
Lifetime subscription, and
a traffic receiver.
nüvi 2200/2300/2400 Series Owner’s Manual
Appendix
Purchasing Additional
Maps
1. Go to your device product page
on the Garmin Web site (www
.garmin.com).
2. Click the Maps tab.
3. Follow the on-screen instructions.
Custom Points of
Interest
Custom POIs are customized points
on the map. They can contain alerts
that let you know if you are near
a designated point or if you are
traveling faster than a specified
speed.
nüvi 2200/2300/2400 Series Owner’s Manual
Installing a POI Loader
You can create or download custom
POI lists and install them on your
device using POI Loader software.
1. Go to www.garmin.com/extras.
2. Click Services > POI Loader.
3. Install the POI Loader onto your
computer.
Using the POI Loader Help
Files
For more information on the POI
Loader, refer to the Help file.
With the POI Loader open, click
Help.
Finding Extras
1. From the main menu, touch
Where To? > Extras.
2. Select a category.
63
Appendix
Safety Cameras
‹ Caution
Garmin is not responsible for the
accuracy of, or the consequences of
using, a custom point of interest or a
safety camera database.
Safety camera information is
available in some locations. Go to
http://my.garmin.com for availability.
For these locations, the device
includes the locations of hundreds
of safety cameras. Your device alerts
you when you are approaching a
safety camera and can warn you if
you are driving too fast. The data
is updated at least weekly, so you
always have access to the most up-todate information.
Purchasing Accessories
Go to http://buy.garmin.com.
Contacting Garmin
Product Support
• In the USA, go to www.garmin
.com/support, or contact Garmin
USA by phone at (800) 800.1020.
• In the UK, contact Garmin
(Europe) Ltd. by phone at 0808
2380000.
• In Europe, go to www.garmin
.com/support and click Contact
Support for in-country support
information, or contact Garmin
(Europe) Ltd. by phone at +44 (0)
870.8501241.
You can purchase a new region or
extend an existing subscription at any
time. Each region that you purchase
has an expiration date.
64
nüvi 2200/2300/2400 Series Owner’s Manual
Appendix
Troubleshooting
Problem
My device is not
acquiring satellite
signals.
The suction cup
will not stay on my
windshield.
The device does not
charge in my vehicle.
My battery does not
stay charged for very
long.
Solution
• Verify that the GPS simulator is turned off
(page 49).
• From the main menu, touch Tools > Settings >
System > GPS Simulator > Off.
• Take your device out of parking garages and
away from tall buildings and trees.
• Remain stationary for several minutes.
• Clean the suction cup and windshield with rubbing
alcohol.
• Dry with a clean, dry cloth.
• Mount the suction cup (page 2).
• Check the fuse in the vehicle power cable (page
60).
• Verify the vehicle is turned on and is supplying
power to the power outlet.
• Your device can only charge between 32°F and
113°F (between 0°C and 45°C). If the device is
placed in direct sunlight or in a hot environment, it
cannot charge.
To maximize the time between changes, turn down
the backlight (page 54).
nüvi 2200/2300/2400 Series Owner’s Manual
65
Appendix
My battery gauge does
not seem accurate.
How do I know my
device is in USB mass
storage mode?
Allow the unit to fully discharge, and fully charge it
(without interrupting the charge cycle).
When your device is in USB mass storage mode, a
picture of a device connected to a computer is shown
on the device screen. Also, you should see two new
removable disk drives listed in My Computer.
The device is
1. Disconnect the USB cable from your computer.
connected to the
2. Turn off the device.
computer, but it will not 3. Plug the USB cable into a USB port on your
go into mass storage
computer and into your device.
mode.
The device automatically turns on and goes into
USB mass storage mode.
4. Verify your device is connected to a USB port and
not a USB hub.
I cannot see any new If you have several network drives mapped on your
removable drives in my computer, Windows can have trouble assigning drive
list of drives.
letters to your device drives. Refer to your operating
system Help file to learn how to map or assign drive
letters.
My phone will not
• From the main menu, touch Tools > Settings
connect to the device.
> Bluetooth. The Bluetooth field must be set to
Enabled.
• Turn on your phone and bring it within 33 feet of
the device.
• Go to www.garmin.com/bluetooth for more help.
66
nüvi 2200/2300/2400 Series Owner’s Manual
Index
Index
Symbols
2-D, 3-D map view 51
A
accessories 64
adding a stop 13
addresses 16
anti-theft feature 59
avoiding
public transit types 51
road types 52
theft 58
traffic 44
B
battery 65
Bluetooth technology
32–35
calling from location
map 19
friendly name 55
on nüvi models 1
pairing with phone 32
settings 55
brightness 54
converting
currency 41
units 41
coordinates 18
current location, saving
21
customizing the device
49–56
custom POIs 63
C
calculator 40
calls
answering 33
hanging up 34
home 35
muting 34
caring for your device 57
changing destinations 13
charging your device 65
cityXplorer maps 13, 31
cleaning your device 58
computer, connecting 4
D
dashboard disk 61
deleting
all user data 60
character 7
favorites 22
files 48
pictures 40
recent finds list 17
trips 23
detailed maps 47, 55
detours 14
diacritical characters 7
display settings 54
driving directions 29
nüvi 2200/2300/2400 Series Owner’s Manual
67
Index
E
ecoRoute 36–39
calibrate fuel economy
37
ecoChallenge score
37
fuel economy
information 38
mileage report 39
vehicle profile 36
editing
change categories 22
change map symbol
22
destinations 23
favorites 22
home location 16
saved trip 23
extras 63
F
Favorites 21–22
feedback on POI’s 19
68
files
deleting 48
supported types 47
finding locations
by address 16
by coordinates 18
by name 16
by postal code 16
recent selections 17
saved locations
(Favorites) 21
using photos 18
using the map 17
fuse, changing 60
G
Garmin Lock 59
Garmin Product Support
64
geocaching 18
go home 15
GPS
about 57
settings 49
simulator 20
H
Help 36
historical traffic 54
home
phone number 35
setting a location 15
J
JPEG image files 47
junction view 1
K
keyboard 7
language mode 7, 55
L
lane assist 1
latitude and longitude 18
location map options 19
locking
the device 59
the screen 6
nüvi 2200/2300/2400 Series Owner’s Manual
Index
M
maps
adding 63
data layout 50
detail level 50
errors 19
information 55
pedestrian 31
purchasing 63
theme 50
view 50
MapSource 47, 63
mass storage mode 47
measurements, converting
41
memory card 47
microSD card 5
mileage report 39
mobile phone features 32
mounting the device
on dashboard 61
on windshield 65
removing from mount
61
mute
audio 6
phone call 34
myDashboard 4
myTrends 28
N
navigation 27
off road 15
pedestrian 31
photo 18
settings 50
nearby services 36
next turn 30
nüMaps Lifetime 62
nüRoute 50
nüvi models
2200 1
2300 1
2400 1
O
off-road navigation 15, 52
offers 46
disabling 46
viewing 46
nüvi 2200/2300/2400 Series Owner’s Manual
on-screen buttons 7
P
pairing a mobile phone 32
parking 14
pedestrian mode
settings 51
photo navigation
loading pictures 18
picture viewer 39
PIN
Bluetooth 32
Garmin Lock 59
points of interest
finding 12
POI loader 47
predictive routing 28
product support 64
protecting your device
57
public transit
avoidances 51
city maps 31
69
Index
R
recalculating routes 14
recently found locations
17
registering the device 5
removing the mount 62
renaming trips 23
reporting map errors 19
resetting
home location 15
the max speed 29
trip data 29
routes
calculation 51
off road 15, 52
stopping 15
S
safe mode 49
safety cameras
alerts 64
databse 64
satellite signals 57
70
saving
found locations 21
your current location
21
school zone database 63
screen
brightness 54
orient 8
screenshots 40
security location 59
settings 49–55
software
version 49
speech recognition 24
speed limit
icon 27
storing the device 57
system settings 49
traffic 42–46
activating a
subscription 42
adding traffic
subscriptions 56
icons 43
incidents 44
receiver 43
trafficTrends 54
trafficTrends 1
transportation mode 9
trip computer 28
resetting information
28
trip planner 22
troubleshooting 65
turn-by-turn directions 29
turn list 29
T
text language 55
time settings 49
tools 36–41
Track Up 50
U
unit converter 41
unit ID 49
updating
maps 5
software 5
nüvi 2200/2300/2400 Series Owner’s Manual
Index
USB 66
connectors 6
user data, deleting 60
V
vehicle profile 38
voice command
activating 24
icons and tones 25
navigating with 25
red icon 25
tips for using 25
wakeup phrase 24
voice dial 35
voice language 55
voice mail 34
volume
adjusting 6
W
Where Am I? 36
world clock 40
nüvi 2200/2300/2400 Series Owner’s Manual
71
For the latest free software updates (excluding map data) throughout the life of
your Garmin products, visit the Garmin Web site at www.garmin.com.
© 2010–2011 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan
www.garmin.com
March 2011
Part Number 190-01250-00 Rev. D
Printed in Taiwan

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project