null  User manual
BCS-707
Blu-ray Disc surround system
XV-BD707
Blu-ray Disc receiver
S-BD707T
Speaker System
S-BD707SW
Speaker System (only subwoofer)
BCS-303
Blu-ray Disc surround system
XV-BD707
Blu-ray Disc receiver
S-BD303
Speaker System
Downloaded From TheatreSystem-Manual.com Manuals
P/NO: MFL65220805
2
1
Safety Information
Safety Information
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product is a class 1 laser product
classified under the Safety of laser products,
IEC60825-1:2007. To ensure proper use of this
product, please read this owner’s manual carefully
and retain it for future reference. Shall the unit
require maintenance, contact an authorized service
centre.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
Downloaded From TheatreSystem-Manual.com Manuals
Safety Information
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
PIONEER hereby declares that this/
these product(s) is/are in compliance
with the essential requirements and
other relevant provisions of Directive
2004/108/EC, 2006/95/EC, and
2009/125/EC.
WARNING: To prevent a fire hazard, do not place any
naked flame sources (such as a lighted candle) on
the equipment.
Downloaded From TheatreSystem-Manual.com Manuals
1
Safety Information
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the cord
exits the appliance. To disconnect power from the
mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
3
4
Safety Information
Information for users on collection and disposal
of old equipment and used batteries
1
Safety Information
Pb
Symbol examples
for batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of these products and batteries
correctly, you will help to save valuable resources
and prevent any potential negative effects on human
health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling
of old products and batteries, please contact your
local municipality, your waste disposal service or the
point of sale where you purchased the items.
These symbols are only valid in the European
Union.
For countries outside the European Union:
If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct
method of disposal.
Notes on Copyrights
• Because AACS (Advanced Access Content System)
is approved as content protection system for BD
format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are
imposed on playback, analogue signal output,
etc., of AACS protected contents. The operation of
this product and restrictions on this product may
vary depending on your time of purchase as those
restrictions may be adopted and/or changed by
AACS after the production of this product.
• Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized
Customer Service Centre.
• Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
• This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
• Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programmes, videotapes, BD-ROM discs, DVDs,
CDs and other materials may subject you to civil
and/or criminal liability.
Downloaded From TheatreSystem-Manual.com Manuals
Safety Information
5
Important Notice for TV colour system
The colour system of this player differs according to
currently playing discs.
Only the multi system colour TV can receive all
signals output from the player.
• If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
• The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it off and then on to see
normal images on screen.
• Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
Downloaded From TheatreSystem-Manual.com Manuals
1
Safety Information
For example, when the player plays the disc recorded
in the NTSC colour system, the image is output as an
NTSC signal.
6
Contents
3
Installation
16
16
1
Safety Information
2
Cautions and Warnings
Speaker Setup for BCS-303
19
Wall mounting the centre speaker
19
Additional notes on speaker
20
Introduction
8
About the “ ” Symbol
Display
8
Positioning the system
Connecting to Your TV
21
HDMI Connection
22
Component Video
Connection
23
Video Connection
Preparation
8
Speaker Setup for BCS-707
18
21
2
Assemble the speakers
23
Resolution Setting
24
Antenna connection
Symbols Used in this Manual
24
Connections with external device
9
Supplied Accessories
24
10
Playable Discs
25
PORTABLE IN connection
11
File compatibility
25
OPTICAL IN 1/2 connection
12
Regional Code
26
Bluetooth® connection
12
AVCHD (Advanced Video
Codec High Definition)
28
12
Certain System Requirements
31
USB device connection
12
Compatibility Notes
32
Settings
29
AUX Connection
Connecting to your Home Network
Network Setup
13
Remote control
32
Adjust the Setup Settings
14
Front panel
33
[DISPLAY] Menu
Rear panel
34
[LANGUAGE] Menu
35
[AUDIO] Menu
36
[LOCK] Menu
37
[NETWORK] Menu
15
37
39
Downloaded From TheatreSystem-Manual.com Manuals
[OTHERS] Menu
Sound Effect
7
4
7
Operation
Appendix
40
General Playback
67
42
Advanced Playback
Controlling a TV with the Supplied
Remote Control
44
On-Screen display
68
Area Code List
48
Enjoying BD-LIVE
69
Language code List
49
Playing movie file and VR discs
70
Video output resolution
51
Viewing a photo
71
Trademarks and Licences
53
Listening to music
73
Specifications
56
Playing the iPod
75
Open source software notice
58
Radio Operations
59
Playing content via your home
network
5
1
2
3
4
Maintenance
63
Notes on Discs
63
Handling the Unit
5
6
Troubleshooting
64
General
65
Picture
65
Sound
66
Network
6
7
8
Downloaded From TheatreSystem-Manual.com Manuals
8
Preparation
2
Preparation
2
Introduction
Preparation
A section whose title has one of the following
symbols are applicable only to the disc
represented by the symbol.
About the “ ” Symbol Display
“ ” may appear on your TV display during
operation and indicates that the function
explained in this owner’s manual is not
available on that specific media.
Symbols Used in this Manual
NOTE
Indicates special notes and operating features.
CAUTION
Indicate cautions for preventing possible
damages from abuse.
Downloaded From TheatreSystem-Manual.com Manuals
BD
BD-ROM disc
DVD
DVD-Video, DVD±R/RW in
Video mode or VR mode
and finalized
AVCHD
DVD±R/RW in AVCHD
format
ACD
Audio CDs
MOVIE
Movie files
MUSIC
Music files
PHOTO
Photo files
Preparation
Supplied Accessories
Video cable (1)
FM antenna (1)
Accessaries of speaker box
(S-BD707SW)
Speaker cable (1)
Accessaries of speaker box
(S-BD303)
Colour-coded
Speaker cables (6)
iPod cradle (1)
Accessaries of speaker box
(S-BD707T)
Large non-skid pads
(1)
Colour-coded
Speaker cables (5)
Screws (12)
Speaker stand bases
(4)
Small non-skid pads
(1)
Large non-skid pads
(1)
Middle non-skid
pads (1)
Downloaded From TheatreSystem-Manual.com Manuals
Small non-skid pads
(1)
2
Preparation
Battery (1)
Remote control (1)
9
10
Preparation
Playable Discs
Blu-ray Disc
- Discs such as movies that can
be purchased or rented.
- BD-R/RE discs that contain
Movie, Music or Photo files.
2
Preparation
DVD-VIDEO
8 / 12 cm disc
Discs such as movies that can be
purchased or rented.
DVD±R
8 / 12 cm disc
- Video mode and finalized only
- Supports the dual layer disc
also
- Finalized AVCHD format
- DVD±R discs that contain
Movie, Music or Photo files
DVD-RW
8 / 12 cm disc
- VR mode, Video mode and
finalized only
- Finalized AVCHD format
- DVD-RW discs that contain
Movie, Music or Photo files.
DVD+RW
8 / 12 cm disc
- Video mode and finalized only
- AVCHD format
- Finalized AVCHD format
- DVD+RW discs that contain
Movie, Music or Photo files.
NOTE
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW) discs
cannot be played on the unit.
• Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
• BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a DVD or
CD Recorder may not play if the disc is damaged
or dirty, or if there is dirt or condensation on the
player’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software
publisher for more detailed information.)
• This player requires discs and recordings to meet
certain technical standards in order to achieve
optimal playback quality.
• Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these
require certain pre-existing conditions to ensure
compatible playback.
• Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Audio CD
8 / 12 cm disc
CD-R/RW
8 / 12 cm disc
- CD-R/RW discs that contain
audio titles, Movie, Music or
Photo files.
Downloaded From TheatreSystem-Manual.com Manuals
Preparation
File compatibility
NOTE
Overall
• HD movie files contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or USB
2.0 are recommended to play back HD movie
files.
Available File extensions:
“.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav”
Available file extensions differ depending
on the DLNA servers.
•
Some “.wav” files are not supported on this
player.
•
The file name is limited to 180 characters.
•
Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
Maximum Files/Folder: Less than 2 000 (total
number of files and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution size:
1 920 x 1 080 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha (.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
VobSub (.sub) is not available in the
[Home Link] feature.
Playable Codec format: “DIVX3.xx”, “DIVX4.
xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard
playback only), H.264/MPEG-4 AVC, MPEG1 SS,
MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA”, “AAC”, “AC3”
• This player supports H.264/MPEG-4 AVC profile
Main, High at Level 4.1. For a file with higher
level, the warning message will appear on the
screen.
• This player does not support the files that are
recorded with GMC*1 or Qpel*2. Those are video
encoding techniques in MPEG4 standard, like
DivX or XVID have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
MUSIC
Sampling frequency:
between 8 kHz to 48 KHz (WMA),
between 11 kHz to 48 kHz (MP3)
Bit rate:
between 8 kbps to 320 kbps (WMA, MP3),
NOTE
• This unit cannot support the ID3 Tag embedded
MP3 file.
• The total playback time indicated on the screen
may not be correct for VBR files.
•
•
Not all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency:
between 32 kHz to 48 kHz (WMA),
between 16 kHz to 48 kHz (MP3)
Bit rate:
between 20 kbps to 320 kbps (WMA),
between 32 kbps to 320 kbps (MP3)
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
Less than 4 MByte/file
•
Progressive and lossless compression photo
image files are not supported.
Downloaded From TheatreSystem-Manual.com Manuals
2
Preparation
•
11
12
2
Preparation
Regional Code
Certain System Requirements
This unit has a regional code printed on the
rear of the unit. This unit can play only BD-ROM
or DVD discs labeled same as the rear of the
unit or “ALL”.
For high definition video playback:
AVCHD (Advanced Video Codec
High Definition)
Preparation
•
This player can playback AVCHD format
discs. These discs are normally recorded and
used in camcorders.
•
The AVCHD format is a high definition
digital video camera format.
•
The MPEG-4 AVC/H.264 format is capable
of compressing images at higher efficiency
than that of the conventional image
compressing format.
•
Some AVCHD discs use the “x.v.Colour”
format.
•
This player can playback AVCHD discs using
“x.v.Colour” format.
•
Some AVCHD format discs may not play,
depending on the recording condition.
•
AVCHD format discs need to be finalized.
•
“x.v.Colour” offers a wider colour range than
normal DVD camcorder discs.
•
High definition display that has
COMPONENT or HDMI input jacks.
•
BD-ROM disc with high definition content.
•
HDMI or HDCP capable DVI input on your
display device is required for some content
(as specified by disc authors).
•
For up-conversion of standard definition
DVD, a HDMI or HDCP capable DVI input
on your display device is required for copy
protected content.
Compatibility Notes
•
Because BD-ROM is a new format,
certain disc, digital connection and other
compatibility issues are possible. If you
experience compatibility problems, please
contact an authorized Customer Service
Centre.
•
Viewing high-definition content and upconverting standard DVD content may
require a HDMI-capable input or HDCPcapable DVI input on your display device.
•
Some BD-ROM and DVD discs may restrict
the use of some operation commands or
features.
•
You can use a USB device that is used
to store some disc related information,
including downloaded on-line content. The
disc you are using will control how long this
information is retained.
Downloaded From TheatreSystem-Manual.com Manuals
Preparation
13
Remote control
1
MUTE: Mute the unit.
1 (STANDBY/ON): Switches the
player ON or OFF.
SOUND: Selects a sound effect
mode.
Z OPEN/CLOSE: Opens and closes
the disc tray.
VOL +/- : Adjusts speaker volume.
INPUT/TUNER: Changes input
mode.
0-9 numerical buttons: Selects
numbered options in a menu.
BT AUDIO: Changes input mode to
BT AUDIO directly.
MARKER: Marks any point during
playback.
OPTICAL: Changes input mode to
optical directly.
SEARCH: Displays or exits the
search menu.
DISPLAY: Displays or exits OnScreen Display.
REPEAT: Repeats a desired
section or sequence.
HOME MENU: Displays or exits
the [Home Menu].
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
MENU: Accesses the menu on a
disc.
Direction buttons: Selects an
option in the menu.
3
Remove the battery cover
on the rear of the Remote
Control, and insert a R03 (size
AAA) battery with and
matched correctly.
DIMMER: Dims the light on the
unit.
ZOOM: Accesses the zoom menu.
ENTER: Acknowledges menu
selection.
Coloured (A, B, C, D) buttons: Use
to navigate on menus.
TUNE (+/-): Tunes in the desired
radio station.
- A button (RDS): Radio Data
System.
PRESET: Selects programme of
Radio.
- B button (PTY): Views the
programme type of the RDS.
• • • • • • • • • b • • • • • • • • •
- C button (PTY SEARCH):
Searches programme type.
O RETURN: Exits the menu or
resumes playback.
Battery Installation
• • • • • • • • • c • • • • • • • • •
POPUP/ TOP MENU: Displays the
DVD title menu or BD-ROM’s popup menu, if available.
x STOP: Stops playback.
B PLAY: Starts playback.
X PAUSE/STEP: Pauses playback
./> SKIP: Goes to the next
or previous chapter / track / file.
m/M SCAN: Searches
backward or forward.
SPK LEVEL: Sets the sound level of
desired speaker.
z USB REC: Records an audio CD.
Downloaded From TheatreSystem-Manual.com Manuals
- D button: Selects MONO or
STEREO in FM mode.
TV Control Buttons: See page 67.
SLEEP: Sets a certain period of time
after which the unit will switch to
off.
2
Preparation
2
• • • • • • • • • a • • • • • • • • •
14
Preparation
Front panel
1
2
2
Preparation
3
4
a Disc Tray
c Remote sensor
b Operation buttons
1 STANDBY/ON Button
Z (OPEN/CLOSE)
FUNCTION
Changes the input source or function
B/X (PLAY / PAUSE)
x (STOP)
./> (SKIP)
- TUNE + (Radio tuning)
d Display window
e PORTABLE IN
f USB Port
g Volume control
Downloaded From TheatreSystem-Manual.com Manuals
5
6
7
Preparation
15
Rear panel
1
2
3
4
5
2
7
8
9
10
11
a AC Power cord
Plug into the power source.
g COMPONENT VIDEO (Y PB PR)
OUTPUT (PROGRESSIVE SCAN)
b Speakers connectors
h OPTICAL IN 1(TV) / 2
c Cooling Fan
i iPod (24 pin)
Connect to the furnished iPod cradle.
d Antenna Connector
e VIDEO OUT
f AUX (L/R) INPUT
j HDMI OUT (type A, Version 1.3)
Connect to TV with HDMI inputs.
k LAN port
Downloaded From TheatreSystem-Manual.com Manuals
Preparation
6
16
Installation
3
Installation
Assemble the
speakers
3
For centre speaker:
Use the supplied adhesive to attach four
small pads to the base of centre speaker.
Installation
Speaker Setup for BCS-707
small non-skid pads
Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker stand bases, the subwoofer
and the centre speaker.
For speaker stand bases:
Use the supplied adhesive to attach four
middle pads to the base (bottom) of each
speaker stand base.
middle non-skid pads
2. Attach the speaker stand bases to the stems
using the screws provided.
Once you have aligned the stem and base,
secure with the small screws at the points
shown below. Note that the speaker should
face in the direction of the base of the
isosceles triangle.
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
Rear
large non-skid pads
Front
Downloaded From TheatreSystem-Manual.com Manuals
Installation
3. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic finger pad to open the connection
terminal. Insert the wire and release the
finger pad.
Coloured (+)
17
Securing your front and surround
speakers
Secure each of the front and surround speakers
using the plastic catch provided. Screw two
supporting hooks into the wall behind the
speaker. Pass a thick cord around the hooks
and through the plastic catch so that the
speaker is stabilized (make sure to test that
it supports the weight of the speaker). After
installing, make sure the speaker is securely
fixed.
3
Plastic catch
CAUTION
• Do not connect any speakers other than those
supplied to this system.
• Do not connect the supplied speakers to any
amplifier other than the one supplied with this
system. Connection to any other amplifier may
result in malfunction or fire.
CAUTION
• The plastic catch is not a mounting fixture, and
the speaker should not be hung directly from
the wall using this catch. Always use a cord
when stabilizing the speaker.
• Pioneer disclaims all responsibility for any
losses or damage resulting from improper
assembly, installation, insufficient strength of the
installation materials, misuse, or natural disasters.
• When placing this unit, ensure that it is firmly
secured and avoid areas where it may be likely
to fall and cause injury in the event of a natural
disaster (such as an earthquake).
Downloaded From TheatreSystem-Manual.com Manuals
Installation
thick cord
18
Installation
Speaker Setup for BCS-303
Preparing the speakers
For centre speaker:
Use the supplied adhesive to attach four
small pads to the base of centre speaker.
1. Attach the non-skid pads to the base of
each speaker.
small non-skid pads
For speaker stand bases:
Use the supplied adhesive to attach four
middle pads to the base (bottom) of each
speaker stand base.
small non-skid pads
3
2. Connect the wires to the player.
Installation
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic finger pad to open the connection
terminal. Insert the wire and release the
finger pad.
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
large non-skid pads
Downloaded From TheatreSystem-Manual.com Manuals
Coloured (+)
Installation
Wall mounting the
centre speaker
Additional notes on
speaker
The centre speaker have a mounting hole
which can be used to mount the speaker on
the wall.
Install the main front left and right speakers at
an equal distance from the TV.
19
Precautions:
Before mounting
Mounting screws are not supplied. Use screws
suitable for the wall material and support the
weight of the speaker.
CAUTION
• If you are unsure of the qualities and strength of
the wall, consult a professional for advice.
• Pioneer is not responsible for any accidents or
damage that result from improper installation.
Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire touches the back panel it may cause the
power to cut off as a safety measure.
The front, centre and surround speakers
supplied with this system are magnetically
shielded. However, depending on the
installation location, colour distortion may
occur if the speaker is installed extremely
close to the screen of a television set. If this
case happens, turn the power switch of the
television set OFF, and turn it ON after 15 min.
to 30 min. If the problem persists, place the
speaker system away from the television set.
The subwoofer is not magnetically shielded
and so should not be placed near a TV or
monitor. Magnetic storage media (such as
floppy discs and tape or video cassettes)
should also not be kept close to the subwoofer.
Do not attach the front/surround speakers and
subwoofer to a wall or ceiling. They may fall off
and cause injury.
Mounting screw
(not supplied)
5 mm
10 mm
5 mm to 7 mm
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
Remember that the speaker system is heavy
and that its weight could cause the screws
to work loose, or the wall material to fail to
support it, resulting in the speaker falling. Make
sure that the wall you intend to mount the
speakers on is strong enough to support them.
Do not mount on plywood or soft surface
walls.
20
Installation
Positioning the system
The following illustration shows an example
of positioning the system. Note that the
illustrations in these instructions differ from the
actual unit for explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A).
C
A
G
Installation
F
A
A
• Place the centre speaker at a safe distance from
the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or
property damage.
A
A
D
• Be careful to make sure children do not put their
hands or any objects into the *subwoofer duct.
*subwoofer duct: A hole for plentiful bass sound
on subwoofer cabinet (enclosure).
• The speakers contain magnet parts, so colour
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers away
from the TV screen or PC monitor screen.
B
3
CAUTION
E
A
A Front left speaker (L)/
B Front right speaker (R):
Place the front speakers to the sides of the
monitor or screen and as flush with the screen
surface as possible.
C Centre speaker:
Place the centre speaker above or below the
monitor or screen.
D Surround left speaker (L)/
E Surround right speaker (R):
Place these speakers behind your listening
position, facing slightly inwards.
F Subwoofer:
The position of the subwoofer is not so
critical, because low bass sounds are not
highly directional. But it is better to place
the subwoofer near the front speakers. Turn
it slightly toward the centre of the room to
reduce the wall reflections.
G Unit
Downloaded From TheatreSystem-Manual.com Manuals
Installation
Connecting to Your TV
Make one of the following connections,
depending on the capabilities of your existing
equipment.
•
HDMI connection (pages 21-22)
•
Component Video connection (page 22)
•
Video connection (page 23)
NOTE
21
HDMI Connection
If you have a HDMI TV or monitor, you
can connect it to this player using a HDMI
cable(Type A, Version 1.3). Connect the HDMI
OUT jack on the player to the HDMI IN jack on
a HDMI compatible TV or monitor.
HDMI Connection
Player
Player
3
• Please refer to the manuals of your TV, stereo
system or other devices as necessary to make
the best connections.
• Make sure the player is connected directly to
the TV. Tune the TV to the correct video input
channel.
Installation
• Depending on your TV and other equipment
you wish to connect, there are various ways you
could connect the player. Use only one of the
connections described in this manual.
TV
TV
• Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
Downloaded From TheatreSystem-Manual.com Manuals
22
Installation
Component Video Connection
NOTE
• Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off the
player and then turn it on again.
• When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
3
• If there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5 m and use a high speed HDMI
cable (version 1.3).
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on
the TV using Y Pb Pr cables. You can hear the
sound the through the system’s speaker.
Component Connection
Player
Player
PR
VIDEO
L
Installation
• If a connected HDMI device does not accept the
audio output of the player, the HDMI
device’s audio sound may be distorted or may
not output.
R
COMPONENT
VIDEO
OUTPUT
Green
Blue
Red
• Select the type of video output from the HDMI
OUT jack using [HDMI Color Setting] option on
the [Setup] menu (see page 34).
• Not all HDCP-compatible HDMI or DVI devices
will work with this player.
- The picture will not be displayed properly with
non-HDCP device.
- This player does not playback and TV screen is
changed to black screen.
Y
INPUT
• When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 23.)
• When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this player.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720x576p (480p), 1280x720p, 1920x1080i or
1920x1080p video input.
PB
AUX
TV
TV
NOTE
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for the
output. (Refer to “Resolution setting” on page 23.)
Downloaded From TheatreSystem-Manual.com Manuals
Installation
Video Connection
Resolution Setting
Connect the VIDEO OUT jack on the player to
the video in jack on the TV using a video cable.
You can hear the sound through the system’s
speakers.
The player provides several output resolutions
for HDMI OUT and COMPONENT VIDEO OUT
jacks. You can change the resolution using
[Setup] menu.
1. Press HOME MENU (
Video Connection
23
).
2. Use I/i/U/u to select the [Setup] and
press ENTER ( ). The [Setup] menu appears.
3. Use U/u to select [DISPLAY] option then
press i to move to the second level.
Player
PR
VIDEO
PB
AUX
R
Y
COMPONENT
VIDEO
INPUT
OUTPUT
Yellow
Yellow
TV
TV
5. Use U/u to select the desired resolution
then press ENTER ( ) to confirm your
selection.
NOTE
• If your TV does not accept the resolution you
have set on the player, you can set resolution to
576p (480p) as follows:
1. Press Z to open the disc tray.
2. Press x for more than 5 seconds.
• Since several factors affect the resolution of
video output, see “Video Output Resolution” on
page 70.
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
L
4. Use U/u to select the [Resolution] option
then press ENTER ( ) or i to move to the
third level.
24
Installation
Antenna connection
Connect the supplied antenna for listening to
the radio.
Antenna Connection
Connections with
external device
AUX Connection
You can enjoy the sound from an external
component through the speakers of this
system.
Connect the analogue audio output jacks of
your component into the AUX L/R (INPUT) on
this unit. And then select the [AUX] option by
pressing INPUT/TUNER, I/i and ENTER ( ).
3
Installation
AUX Connection
Player
Player
Player
VIDEO
L
PR
PB
AUX
R
Y
COMPONENT
VIDEO
INPUT
Red
Red
White
White
NOTE
After connecting the FM wire antenna, keep it as
horizontal as possible. Be sure to fully extend the
FM wire antenna.
To the audio output jacks
To the
audiocomponent
output jacks
of your
of your
component
(TV, VCR, etc.)
(TV, VCR, etc.)
Downloaded From TheatreSystem-Manual.com Manuals
Installation
PORTABLE IN connection
OPTICAL IN 1/2 connection
You can enjoy the sound from your portable
audio player through the speakers of this
system.
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the headphones (or line out )
jack of the portable audio player into the
PORTABLE IN socket of this unit. And then
select the [PORTABLE] option by pressing
INPUT/TUNER, I/i and ENTER ( ).
Connect the optical output jack of your
component into the OPTICAL IN 1/2 jacks on
the unit. And then select the [OPTICAL 1/2]
option by pressing INPUT/TUNER, I/i and
ENTER ( ). Or press OPTICAL to select directly.
PORT.IN Connection
25
Optical Connection
3
Installation
To
Tothe
thedigital
digital
optical
opticaloutput
outputjack
jack
of
ofyour
yourcomponent
component
twZG—“ˆ Œ™SGŒ›ŠUUU
Downloaded From TheatreSystem-Manual.com Manuals
26
Installation
Bluetooth® connection
About Bluetooth
Bluetooth® is wireless communication
technology for short range connection.
3
Installation
The available range is within 10 meters.
(The sound may be interrupted when the
connection interfered by the other electronic
wave or you connect the bluetooth in the other
rooms.)
Connecting individual devices under
Bluetooth wireless technology does not incur
any charges. A mobile phone with Bluetooth
wireless technology can be operated via
the Cascade if the connection was made via
Bluetooth wireless technology.
1. Select the Bluetooth function by using the
INPUT/TUNER or BT AUDIO.
Appears “BT AUDIO” and then “BT READY” in
display window.
2. Operate the Bluetooth device and perform
the pairing operation. When searching for
this unit with the Bluetooth device, a list
of the devices found may appear in the
Bluetooth device display depending on the
type of Bluetooth device. Your unit appears
as “PIONEER AUDIO”.
3. Enter the PIN code.
PIN cord : 0000
4. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and appears “BT SINK”.
Available Devices : Mobile phone, MP3, Laptop,
PDA (This units be supported the Stereo
Headset.)
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain
profiles.
This unit is compatible with following profile.
NOTE
Depending on the Bluetooth device type, some
device have a different pairing way.
5. Listening to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide.
A2DP (Advanced Audio Distribution Profile)
NOTE
Listening to music of a Bluetooth
device
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to
your Bluetooth device. Refer to your Bluetooth
device’s user guide. Once a pairing operation is
performed, it does not need to be performed
again.
• If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
• AVRCP cannot be available in this mode.
Downloaded From TheatreSystem-Manual.com Manuals
Installation
Checking the information of connected
Bluetooth device
This function is operated after pairing. You can
check the Bluetooth information.
Press DISPLAY repeatedly.
Bluetooth information is changed as follows.
Local Bluetooth Device Address t Device
Name t None t ...
27
NOTE
• This units dose not be supported the Mono
Headset Profile (Hands Free Profile).
• The sound may be interrupted when the
connection interfered by the other electronic
wave.
• You cannot control the Bluetooth device with
this unit.
• Pairing is limited one Bluetooth device per one
unit and multi-pairing is not supported.
• Depending on the type of the device, you may
not be able to use the Bluetooth function.
• When not connected the Bluetooth, “BT READY”
appears on the display window.
• The Electrical malfunction due to devices using
same frequency such as Medical equipment,
Microwaves or wireless LAN devices, the
connection will be disconnected.
• When someone stands and interrupts
communication between Bluetooth device and
the player, the connection will be disconnected.
• If the gotten away of the distance between
Bluetooth and the unit, the sound quality is lower
and lower the connection will disconnect when
the space between the Bluetooth and the unit
gets out of the operating range of Bluetooth.
• The device with Bluetooth wireless technology
is disconnected, if you turn off the main unit or
put the device away from the main unit more
than 10 m.
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
• Although the distance between your Bluetooth
and the set is less than 10 m, there are obstacles
between both, your Bluetooth device cannot be
connected.
28
Installation
Connecting to your
Home Network
Network Connection
Router
Router
Broadband
Broadband
Service
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel.
3
Service
WAN
Installation
Please refer to the documentation for your
network device for further instructions.
Connect the player’s LAN port to the
corresponding port on your Modem or Router
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
In the example configuration for wired
connection below, this player would be able to
access content from either of the PCs.
LAN 1
LAN 2
PC
PC
LAN 3
Player
Player
NOTE
• When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
• Do not connect a modular phone cable to the
LAN port.
• Since there are various connection
configurations, please follow the specifications
of your telecommunication carrier or internet
service provider.
• If you want to access content from PCs or DLNA
servers, this player must be connected to the
same local area network with them via a router.
Downloaded From TheatreSystem-Manual.com Manuals
Installation
Network Setup
Before setting the wired network, you need to
connect the broadband internet to your home
network.
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follows.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set the [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using U/u/I/i and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
3. Select [OK] and press ENTER ( ) to apply
network settings.
4. The player will ask you to test the network
connection. Select [OK] and press ENTER
( ) to complete the network connection.
5. If you select [Test] and press ENTER ( )
at step 4 above, the network connection
status is displayed on the screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
2. Use U/u/I/i to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
29
30
Installation
Notes on Network Connection:
•
3
Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the
player to the home network, quickly power
off and/or disconnect the power cable of
the home network router or cable modem.
Then power on and/or connect the power
cable again.
Depending on the internet service provider
(ISP), the number of devices that can
receive internet service may be limited by
the applicable terms of service. For details,
contact your ISP.
•
Our company is not responsible for
any malfunction of the player and/or
the internet connection feature due to
communication errors/malfunctions
associated with your broadband internet
connection, or other connected equipment.
•
The features of BD-ROM discs made
available through the Internet Connection
feature are not created or provided
by our company, and our company is
not responsible for their functionality
or continued availability. Some disc
related material available by the Internet
Connection may not be compatible with
this player. If you have questions about such
content, please contact the producer of the
disc.
Installation
•
•
Some internet contents may require a
higher bandwidth connection.
•
Even if the player is properly connected and
configured, some internet contents may
not operate properly because of internet
congestion, the quality or bandwidth of
your internet service, or problems at the
provider of the content.
•
Some internet connection operations may
not be possible due to certain restrictions
set by the Internet service provider (ISP)
supplying your broadband Internet
connection.
•
Any fees charged by an ISP including,
without limitation, connection charges are
your responsibility.
•
A 10 Base-T or 100 Base-TX LAN port is
required for wired connection to this player.
If your internet service does not allow for
such a connection, you will not be able to
connect the player.
•
You must use a Router to use xDSL service.
•
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with
your ISP, you may not be able to use the
internet connection feature contained in
this player or you may be limited to the
number of devices you can connect at the
same time. (If your ISP limits subscription
to one device, this player may not be
allowed to connect when a PC is already
connected.)
•
The use of a “Router” may not be allowed
or its usage may be limited depending on
the policies and restrictions of your ISP. For
details, contact your ISP directly.
•
Turn off all unused network equipment in
your local home network. Some devices
may generate network traffic.
Downloaded From TheatreSystem-Manual.com Manuals
Installation
USB device
connection
This player can play movie, music and photo
files contained in the USB device.
1. Insert a USB device to the USB port until it
fits into place.
USB Connection
NOTE
• This player supports USB flash memory/external
HDD formatted in FAT16, FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-LIVE and Audio CD recording, only FAT16
and FAT32 formats are supported. Use the USB
flash memory/external HDD formatted in either
FAT16 or FAT32 when using BD-LIVE and Audio
CD recording.
• The USB device can be used for local storage for
enjoying BD-Live discs from the Internet.
• This unit can support up to 4 partitions of the
USB device.
• An USB device which requires additional
programme installation when you have
connected it to a computer, is not supported.
• USB device: USB device that support USB 1.1
and USB 2.0.
• Movie, music and photo files can be played.
For details of operations on each file, refer to
relevant pages.
3. Select a file using U/u/I/i, and press PLAY
or ENTER ( ) to play the file.
You can check the space of the USB device
on the screen.
4. Select the other mode. And withdraw the
USB device carefully.
• Regular back up is recommended to prevent
data loss.
• If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognised.
• Some USB device may not work with this unit.
• Digital camera and mobile phone are not
supported.
• The USB Port on this unit cannot be connected
to a PC.
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
• Do not extract the USB device during operation
(play, etc.).
2. Press
HOME MENU.
Select [Movie], [Photo] or [Music] using
U/u/I/i, and press ENTER ( ).
31
32
Installation
4. Use U/u to select a second setup option,
and press ENTER ( ) to move to the third
level.
Settings
Adjust the Setup Settings
You can change the settings of the player in
the [Setup] menu.
1. Press HOME MENU (
).
5. Use U/u to select a desired setting, and
press i or ENTER ( ) to confirm your
selection.
3
Installation
2. Use I/i/U/u to select [Setup] and press
ENTER ( ). The [Setup] menu appears.
3. Use U/u to select a first setup option, and
press i to move to the second level.
Downloaded From TheatreSystem-Manual.com Manuals
Installation
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to
your TV type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking
bars above and below the picture.
[4:3 Pan Scan]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
33
Resolution
Sets the output resolution of the Component
and HDMI video signal. Refer to page 23 and
70 or details about the resolution setting.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
this automatically selects the resolution
best suited to the connected TV. If the
COMPONENT VIDEO OUT only is connected,
this changes the resolution to 1080i as
default resolution.
[16:9 Original]
Select when a 16:9 wide TV is connected.
The 4:3 picture is displayed with an original
4:3 aspect ratio, with black bars appearing
at the left and right sides.
[1080i]
Outputs 1080 lines of interlaced video.
[16:9 Full]
Select when a 16:9 wide TV is connected.
The 4:3 picture is adjusted horizontally (in a
linear proportion) to fill the entire screen.
[576p (480p)]
Outputs 576 (480) lines of progressive video.
[720p]
Outputs 720 lines of progressive video.
[576i (480i)]
Outputs 576 (480) lines of interlaced video.
NOTE
You cannot select [4:3 Letter Box] and [4:3 Pan
Scan] option when the resolution is set to higher
than 720p.
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
[1080p]
Outputs 1080 lines of progressive video.
34
Installation
1080p Display Mode
[LANGUAGE] Menu
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/ 24 Hz) with a HDMI-equipped display
compatible with 1080p/ 24 Hz input.
Display Menu
Select a language for the [Setup] menu and
on-screen display.
NOTE
• When you select [24 Hz], you may experience
some picture disturbance when the video
switches video and film material. In this case,
select [50 Hz].
3
Installation
• Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/ 24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
HDMI Color Setting
Select the type of output from the HDMI
OUT jack. For this setting, please refer to the
manuals of your display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI (RGB)
display device.
Disc Menu/ Disc Audio/
Disc Subtitle
Select the language you prefer for the audio
track (disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER ( ) to select another language.
Use number buttons then ENTER ( ) to
enter the corresponding 4-digit number
according to the language code list on
page 69.
[Off ] (for Disc Subtitle only)
Turn off Subtitle.
NOTE
Depending on the disc, your language setting may
not work.
Downloaded From TheatreSystem-Manual.com Manuals
Installation
[AUDIO] Menu
Speaker Setup
To obtain the best possible sound, use the
speaker setup display to specify the volume
of the speakers you have connected and their
distance from your listening position. Use the
test to adjust the volume of the speakers to the
same level.
35
HD AV Sync
Sometimes Digital TV encounters a delay
between picture and sound. If this happens
you can compensate by setting a delay on the
sound so that it effectively ‘waits’ for the picture
to arrive: this is called HD AV Sync. Use U u to
scroll up and down through the delay amount,
which you can set at anything between 0 and
300 ms.
[Speaker]
Select a speaker that you want to adjust.
The delay will vary depending on which digital
TV channel you are on. If you change channel
you may need to readjust the HD AV Sync.
[Volume]
Adjust the output level of each speaker.
DRC (Dynamic Range Control)
3
When a title encoded in Dolby Digital or Dolby
Digital Plus is playing back, you may wish to
compress the dynamic range of the audio
output (the difference between the loudest
sounds and the quietest ones). This allows you
to listen to a movie at a lower volume without
losing clarity of sound. Set [DRC] to [On] for
this effect.
Installation
[Distance]
Adjust the distance between each speaker
and the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Confirms the setting.
[Cancel]
Cancels the setting.
NOTE
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete stop
mode.
Downloaded From TheatreSystem-Manual.com Manuals
36
Installation
[LOCK] Menu
To access any features in the [LOCK] settings,
you must enter the 4-digit security code you
have created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password
twice, and press ENTER ( ) to create a new
password.
Password
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select this, parental control is not
active and the disc plays in full.
You can create or change the password.
3
Installation
[None]
Enter a 4-digit password twice, and press
ENTER ( ) to create a new password.
[Change]
Enter the current password and press ENTER
( ). Enter a 4-digit password twice, and
press ENTER ( ) to create a new password.
BD Rating
Sets an age limit for BD-ROM playback.
Use number buttons to input an age limit for
BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with
corresponding ratings recorded on them.
NOTE
If you make a mistake before pressing ENTER ( ),
press CLEAR. Then input the correct password.
NOTE
The [BD Rating] will be applied only for the BD disc
that containing the Advanced Rating Control.
If you forget your password,
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [Lock] option in the [Setup] menu.
3. Use number buttons to enter “210499” on the
[Lock] Menu. The password is cleared.
Area Code
Enter the code of the area whose standards
were used to rate the DVD video disc, based
on the list on page 68.
Downloaded From TheatreSystem-Manual.com Manuals
Installation
[OTHERS] Menu
Connection Setting
DivX VOD
If your home network environment is ready to
connect to the player, the player needs to be
set up for network communication.
(See “Connecting to your Home Network” on
page 28.)
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX
video.
Connection Status
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
If you want to check the network status on
this player, select the [Connection Status]
option and press ENTER ( ) to check whether
a connection to the network and the internet
has been established.
BD-LIVE connection
You can restrict Internet access when BD-LIVE
functions are used.
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BDLIVE contents which have content owner
certificates. Internet access and AACS
Online functions are prohibited for all BDLIVE contents without a certificate.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
NOTE
All the downloaded videos from DivX VOD with
this player’s registration code can only be played
back on this unit.
[Prohibited]
Internet access is prohibited for all BD-LIVE
contents.
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
[NETWORK] Menu
37
38
Installation
Auto Power Off
The screen saver appears when you leave
the player in Stop mode for about five
minutes. If you set this option to [On], the unit
automatically turns itself off after the Screen
Saver is displayed for 25 minutes.
Set this option to [Off ] to leave the screen
saver until the unit is operated by the user.
Initialize
Factory Set
You can reset the player to its original
factory settings.
3
Installation
BD Storage Clear
Removes the BD contents from the
connected USB storage.
NOTE
If you reset the player to its original factory settings
using [Factory Set] option, you have to set all the
activation for the on-line services and network
settings again.
Software Information
Displays the current software version.
Downloaded From TheatreSystem-Manual.com Manuals
Installation
Sound Effect
39
[Clear Voice]: This mode makes voice sound
clear, improving the quality of voice sound.
[Game]: You can enjoy more virtual sound
while playing video games.
You can select a suitable sound mode. Press
SOUND repeatedly until the desired mode
appears on the front panel display or the TV
screen. The displayed items for the equalizer
maybe different depending on sound sources
and effects.
[Pioneer 1]: Gives you suitable sound setting
with connecting small type of speakers
(S-BD303).
[Night]: This may be useful when you want to
watch movies at low volumes late at night.
[Mus. ReTouch]: When listening to MP3 files or
other compressed music, you can enhance the
sound. This mode is available only to 2 channel
sources.
[Loudness]: Improves bass and treble sound.
[Bypass]: Software with multichannel surround
audio signals is played according to the way it
was recorded.
[Bass Blast]: Reinforce the bass sound
effect from front left and right speaker and
subwoofer.
[PL ll Movie]: Performs Pro Logic ll movie
mode decoding to the input signal and
produces five full-bandwidth output channels
from 2 channel sources. This setting is ideal for
watching videos of overdubbed or old movies.
This mode is available only to 2 channel
sources.
[PL ll Music]: Performs Pro Logic ll music mode
decoding to the input signal and produces
five full-bandwidth output channels from
2 channel sources. This setting is ideal for
normal stereo sources such as CD. This mode is
available only to 2 channel sources.
Downloaded From TheatreSystem-Manual.com Manuals
3
Installation
[Pioneer 2]: Gives you suitable sound
setting with connecting tall type of speakers
(S-BD707T).
40
Operation
4
Operation
General Playback
4. Select [Movie], [Photo] or [Music] using
U/u/I/i, and press ENTER ( ).
5. Select the Disc option using I/i, and press
ENTER ( ).
Playing Discs
1. Press Z OPEN/CLOSE, and place a disc on
the disc tray.
4
Operation
When you connect up to two devices, it
appears as above.
2. Press Z OPEN/CLOSE to close the disc tray.
For most Audio CD, BD-ROM and
DVD-ROM discs, playback starts
automatically.
3. Press
HOME MENU.
6. Select a file using U/u/I/i, and press B
PLAY or ENTER ( ) to play the file.
NOTE
• Playback functions described in this manual are
not always available in every files and medium.
Some functions can be restricted depending on
many factors.
• Depending on the BD-ROM titles, a USB device
connection may be needed for proper playback.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
To stop playback
Press x STOP during playback.
Using the disc menu
BD
DVD
AVCHD
To pause playback
To display the disc menu
Press X PAUSE/STEP during playback.
Press B PLAY to resume playback.
The menu screen may be displayed first after
loading a disc which contains a menu. If you
want to display the disc menu during playback,
press MENU.
To play frame-by-frame
Press X PAUSE/STEP while movie playback.
Press X PAUSE/STEP repeatedly to playback
Frame-by-Frame.
41
Use U/u/I/i buttons to navigate through
menu items.
To display the Pop-up menu
To scan forward or backward
Press m or M to play fast forward or fast
reverse during playback.
You can change the various playback speeds
by pressing m or M repeatedly.
Some BD-ROM discs contain a Pop-up menu
that appears during playback.
Press POPUP/ TOP MENU during playback, and
use U/u/I/i buttons to navigate through
menu items.
While the playback is paused, press M SCAN
repeatedly to play various speeds of slow
motion.
To skip to the next/previous
chapter/track/file
During playback, press . or > to go to
the next chapter/track/file or to return to the
beginning of the current chapter/track/file.
Press . twice briefly to step back to the
previous chapter/track/file.
Resume playback
BD
MUSIC
DVD
AVCHD MOVIE
ACD
This unit remembers the x STOP depending
on the disc.
If “Xx (Resume Stop)” appears on the screen
briefly, press B (PLAY) to resume playback
(from the scene point).
If you press x (STOP) twice or unload the disc,
“x”(Complete Stop) appears on the screen.
The unit will clear the stopped point.
NOTE
• The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
Z (OPEN/CLOSE), etc).
• On BD-Video discs with BD-J, the resume
playback function does not work.
• If you press x (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
To slow down the playing speed
42
Operation
Advanced Playback
DVD
AVCHD
ACD
MUSIC
During playback, press REPEAT ( ) repeatedly
to select a desired repeat mode.
BDs/DVDs
A- – Selected portion will be repeated
continually.
Chapter – The current chapter will be
played back repeatedly.
Title – The current title will be played
back repeatedly.
4
BD
DVD
AVCHD
ACD
This player can repeat a portion you have
selected.
Repeat Playback
BD
Repeating a specific portion
1. During playback, press REPEAT ( ) to
select [A-] at the beginning of the portion
you wish to repeat. And then press ENTER
( ).
2. Press ENTER ( ) at the end of the portion.
Your selected portion will be repeated
continually.
3. To return to normal playback, press REPEAT
( ) repeatedly to select [OFF] or press
CLEAR.
To return to normal playback, press REPEAT
( ) repeatedly to select [Off ].
NOTE
Operation
You cannot select a portion less than 3 seconds.
Audio CDs/Music files
– The current track or file will be
played back repeatedly.
– All the tracks or files will be played
back repeatedly.
– The tracks or files will be played back
in random order.
– All the tracks or files will be
played back repeatedly in random order.
– Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
Marker Search
BD
DVD
AVCHD MOVIE
You can start playback from up to nine
memorized points.
To enter a marker
1. During playback, press MARKER at the
desired point. The Marker icon appears on
the TV screen briefly.
2. Repeat step 1 to add up to nine markers.
NOTE
• If you press > once during Repeat Chapter/
Track playback, the repeat playback cancels.
• This function may not work on some disc or title.
To recall a marked scene
1. Press SEARCH and the search menu appears
on the screen.
2. Press a number button to select a marker
number that you want to recall. Playback
starts from the marked scene.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
To delete a Marker
1. Press SEARCH and the search menu appears
on the screen.
43
Using the search menu
BD
DVD
AVCHD MOVIE
Using search menu, you can easy to find the
point where you want to start playback.
To search a point
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to delete.
1. During playback, press SEARCH to display
the search menu.
3. Press CLEAR and the marked scene is erased
from the search menu.
NOTE
• This function may not work depending on discs,
titles, server ability.
2. Press I/i to skip the playback 15 seconds
forward or backward. You can select a
point that you want to skip by pressing and
holding I/i button.
To start playback from a marked
scene
• If the total length of the title is less than
10 seconds, this function is not available.
1. Press SEARCH and the search menu appears
on the screen.
2. Press u to highlight a marker number. Use
I/i to select a marked scene that you
want to playback from.
3. Press ENTER ( ) to start playback from the
marked scene.
NOTE
• This function may not work depending on discs,
titles, server ability.
• This function may not work on some [Home
Link] contents depending on the file type and
ability of the DLNA server.
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
• All marked points are cleared if the title is in
complete stop (x) mode, the title is changed or
if you unload the disc.
44
Operation
Last Scene Memory
BD
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the unit or switch off the unit. If you load a disc
that has the scene memorized, the scene is
automatically recalled.
NOTE
• Last Scene Memory function for a previous disc
is erased once a different disc is played.
On-Screen display
You can display and adjust various information
and settings concerning the content.
Displaying content information
on-screen
BD
DVD
AVCHD MOVIE
1. During playback, press DISPLAY ( ) to show
various playback information.
• This function may not work depending on the
disc.
a
b
c
• This unit does not memorize settings of a disc if
you switch off the unit before commencing to
play it.
4
Operation
d
e
f
g
h
a Title – Current title number/total number
of titles
b Chapter – Current chapter number/total
number of chapters
c Time – Elapsed playing time/Total
playback time
d Audio – Selected audio language or
channel
e Subtitle – Selected subtitle
f Angle – Selected angle/total number of
angles
g TV Aspect Ratio – Selected a TV aspect
Ratio
h Picture Mode – Selected picture mode
Downloaded From TheatreSystem-Manual.com Manuals
Operation
2. Select an option using U/u.
3. Use I/i to adjust the selected option
value.
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
• If no button is pressed for a few seconds, the onscreen display disappears.
• A title number cannot be selected on some
discs.
• Available items may differ depending on discs
or titles.
• If BD interactive title is playing back, some
setting information is displayed on the screen
but prohibited to be changed.
45
Playing from selected time
BD
DVD
AVCHD MOVIE
1. Press DISPLAY ( ) during playback. The
time search box shows the elapsed playing
time.
2. Select the [Time] option and then input
the required start time in hours, minutes,
and seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press I/i to skip the playback 60 seconds
forward or backward.
3. Press ENTER ( ) to start playback from
selected time.
NOTE
4
• This function may not work on some [Home
Link] contents depending on the file type and
ability of the DLNA server.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
• This function may not work on some disc or
titles.
46
Operation
Hearing different audio
BD
DVD
AVCHD MOVIE
BD
DVD
AVCHD MOVIE
1. During playback, press DISPLAY ( ) to
display the on-screen display.
1. During playback, press DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [Audio] option.
2. Use U/u to select the [Subtitle] option.
3. Use I/i to select desired audio language,
audio track or audio channel.
3. Use I/i to select the desired subtitle
language.
NOTE
• Some discs allow you to change audio selections
only via the disc menu. If this is the case, press
POPUP/ TOP MENU or MENU button and choose
the appropriate audio from the selections on
the disc menu.
4
Selecting a subtitle language
• Immediately after you have switched sound,
there may be a temporary discrepancy between
the display and actual sound.
4. Press RETURN (O) to exit the On-Screen
display.
NOTE
Some discs allow you to change subtitle selections
only via the disc menu. If this is the case, press
POPUP/ TOP MENU or MENU button and choose
the appropriate subtitle from the selections on the
disc menu.
Operation
Downloaded From TheatreSystem-Manual.com Manuals
Operation
Watching from a different angle
BD
DVD
Changing the Picture Mode
BD
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press DISPLAY ( ) to
display the on-screen display.
DVD
AVCHD MOVIE
You can change the [Picture mode] option
during playback.
1. During playback, press DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [Angle] option.
2. Use U/u to select the [Picture Mode]
option.
3. Use I/i to select desired angle.
3. Use I/i to select desired option.
4. Press RETURN (O) to exit the On-Screen
display.
4. Press RETURN (O) to exit the On-Screen
display.
Changing the TV Aspect Ratio
BD
DVD
AVCHD MOVIE
Setting the [User setting] option
1. During playback, press DISPLAY ( ) to
display the on-screen display.
2. Use U/u to select the [Picture Mode]
option.
1. During playback, press DISPLAY ( ) to
display the on-screen display.
3. Use I/i to select the [User setting] option,
and press ENTER ( ).
2. Use U/u to select the [TV Aspect Ratio]
option.
3. Use I/i to select desired option.
4. Press RETURN (O) to exit the On-Screen
display.
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV Aspect
Ratio] option in the [Setup] menu is not changed.
4. Use U/u/I/i to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER
( ) to reset the all adjustments.
5. Use U/u/I/i to select the [Close] options,
and press ENTER ( ) to finish setting.
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
You can change the TV aspect ratio setting
during playback.
NOTE
47
48
Operation
Enjoying BD-LIVE
This unit allows you to enjoy functions such as
picture-in-picture, secondary audio and Virtual
packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Profile 1
version 1.1/ Final Standard Profile).
Secondary video and audio can be played from
a disc compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
4
In addition to the BONUSVIEW function, BDVideo supporting BD-LIVE (BD-ROM version
2 Profile 2) that has a network extension
function allows you to enjoy more functions
such as downloading new movie trailers by
connecting this unit to the internet.
Operation
1. Check the network connection and settings
(pages 28-30).
2. Insert a USB storage device to the USB port
on the front panel.
A USB storage device is needed to
download bonus content.
3 . Press
HOME MENU, and set the [BD-LIVE
connection] option on the [Setup] menu
(page 37).
Depending on the disc, the BD-LIVE
function may not operate if
[BD-LIVE connection] option is set to
[Partially Permitted].
4 . Insert a BD-ROM with BD-LIVE.
The operations may differ depending on
the disc. Refer to the manual supplied with
the disc.
NOTE
• Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc is
still in the disc tray. Doing so may damage the
connected USB device and BD-LIVE features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC
and reuse it with this player.
• Some BD-LIVE contents may be restrictively
accessed in some territories by contents
provider’s own decision.
• It may take up to several minutes to load and
start enjoying BD-LIVE contents.
USB Connection
Downloaded From TheatreSystem-Manual.com Manuals
Operation
Playing movie file and
VR discs
49
NOTE
• The file requirements are described on page 11.
• You can use various playback functions. Refer to
pages 40-47.
You can play DVD-RW discs that are recorded
in Video Recording (VR) format and movie files
contained in a disc or USB device.
1. Press
HOME MENU.
• Unfinalized DVD VR format discs may not be
played in this player.
• Some DVD-VR disc are made with CPRM data
by DVD recorder. This unit cannot support these
kinds of discs.
What is CPRM?
CPRM is a copy protection system (with
scramble system) only allowing the recording of
‘copy once’ broadcast programmes. CPRM stands
for Content Protection for Recordable Media.
2. Select [Movie] using U/u/I/i, and press
ENTER ( ).
4
3. Select the device using I/i, and press
ENTER ( ).
Operation
When you connect up to two devices, it
appears as above.
4. Select a file using U/u/I/i, and press
B PLAY or ENTER ( ) to play the file.
Downloaded From TheatreSystem-Manual.com Manuals
50
Operation
Selecting a subtitle file
Changing subtitle code page
MOVIE
MOVIE
If a movie file name and the subtitle file
name are the same, subtitle file is played
automatically when playing the movie file.
If the subtitle is not displayed properly, You
can change the subtitle code page to view the
subtitle file properly.
If the subtitle file name is different with the
movie file name, you need to select the subtitle
file on the [Movie] menu before playing the
movie.
1. During playback, press DISPLAY ( ) to
display the on-screen display.
1. Use U/u/I/i to select the subtitle file you
wish to play in the [Movie] menu.
2. Use U/u to select the [Code Page] option.
3. Use I/i to select desired code option.
2. Press ENTER ( ).
Press ENTER ( ) again to deselect the
subtitle file. Selected subtitle file will be
displayed when you play the movie file.
4
NOTE
Operation
• If you press x STOP during playback, the
subtitle selection is cancelled.
4. Press RETURN (O) to exit the On-Screen
display.
• This function may not work in the [Home Link]
feature.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
Viewing a photo
You can view photo files using this player.
1. Press
51
To play a slide show
Press B PLAY to start slide show.
To stop a slide show
Press x STOP during slide show.
HOME MENU
To pause a slide show
Press X PAUSE/STEP during slide show.
Press B PLAY to re-start the slide show.
To skip to the next/previous photo
2. Select [Photo] using I/i, and press ENTER
( ).
3. Select the device using I/i, and press
ENTER ( ).
While viewing a photo in full screen, press I or
i to go to the previous or next photo.
NOTE
• The file requirements are described on page 11.
When you connect up to two devices, it
appears as above.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
• You can use various playback functions. Refer to
pages 40-47.
52
Operation
Options while viewing a photo
You can use various options while viewing a
photo in full screen.
1. While viewing a photo in full screen, press
DISPLAY ( ) to display the option menu.
Listening to music during a
slide show
You can display photo files while listening to
music files.
1. Press
HOME MENU
2. Select an option using U/u.
a
b
c
d
e
f
g
h
4
2. Select [Photo] or [Home Link] using
U/u/I/i, and press ENTER ( ).
3. Select the [Disc] or [USB] option using I/i,
and press ENTER ( ).
Operation
a Current photo/Total number of photos
– Use I/i to view previous/next photo.
b Slide Show – Press ENTER ( ) to start or
pause slide show.
c Music Select – Select the background
music for the slide show.
d Music –Press ENTER ( ) to start or pause
background music.
e Rotate – Press ENTER ( ) to rotate the
photo clockwise.
f Zoom – Press ENTER ( ) to display the
[Zoom] menu.
g Effect – Use I/i to select a transition
effect between photos in a slide show.
h Speed – Use I/i to select a delaying
speed between photos in a slide show.
Selecting a server or a share folder is
needed for [Home Link] menu.
4. Select a file using U/u/I/i, and press
ENTER ( ) to view the photo.
5. Press DISPLAY ( ) to display the option
menu.
6. Use U/u to select [Music Select] option,
and press ENTER ( ) to display the [Music
Select] menu.
3. Press RETURN (O) to exit the option menu.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
7. Use U/u to select a device, and press ENTER
( ).
Devices that you can select may differ
depending on the location of the photo file
you are displaying in full screen.
Photo location
Available Device
Disc
Disc, USB
USB
Disc, USB
Share Folder on
your PC (CIFS)
CIFS
DLNA server
DLNA server
8. Use U/u to select a file or a folder you wish
to play.
Listening to music
The player can play Audio CDs and music files
1. Press
HOME MENU
2. Select [Music] using U/u/I/i, and press
ENTER ( ).
3. Select the device using I/i, and press
ENTER ( ).
Select and press ENTER ( ) to display
the upper directory.
When selecting music from [Home Link], folder
selection is not available. Only file selection is
available on the [Home link].
4
Operation
Select a folder and press ENTER ( ) to
display the lower directory.
NOTE
53
When you connect up to two devices, it
appears as above.
4. Select a music file or audio track using
U/u/I/i, and press ENTER ( ) to play the
music.
9. Use i to select [OK], and press ENTER ( )
to complete music selection.
NOTE
• The file requirements are described on page 11.
• You can use various playback functions. Refer to
pages 40-47.
Downloaded From TheatreSystem-Manual.com Manuals
54
Operation
Audio CD Recording
You can record one desired track or all of the
tracks in Audio CD to a USB storage device.
6. Use U/u/I/i to select [Start], and press
ENTER ( ).
7. Use U/u/I/i to select the destination
folder to be copied.
1. Insert a USB storage device to the USB port
on the front panel.
2. Press Z (OPEN/CLOSE), and place an Audio
CD on the disc tray.
Press Z (OPEN/CLOSE) to close the disc
tray. The playback starts automatically.
3. Press DISPLAY ( ) to display the option
menu.
Or
Press z USB REC button on the remote
control. You can record all musics in the
audio CD.
4
Operation
4. Use U/u to select [CD Recording] option,
and press ENTER ( ) to display the [CD
Recording] menu.
Repeat this step to select tracks as many as
you want.
5. Use U/u to select a track you wish to copy
on the menu, and press ENTER ( ).
Repeat this step to select tracks as many as
you can.
If you want to create a new folder, use U/u/
I/i to select [New Folder] and press ENTER
( ).
Enter a folder name using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
8. Use U/u/I/i to select [OK], and press
ENTER ( ) to start Audio CD recording.
If you want to stop the Audio CD recording,
press ENTER ( ) while [Cancel] is
highlighted.
9. A message appears when Audio CD
recording is completed. Press ENTER ( )
to check the music file created in the
destination folder.
Select all the tracks on an Audio
CD.
Selects an encoding option from
the pop-up menu (128 kbps,
192 kbps, 320 kbps or Lossless).
Cancels the recording and
returns to the previous screen.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
55
NOTE
• The table below shows the average recording
time from an audio track with 4 minutes of
playback time to a music file with 192 kbps as an
example.
stop mode
during playback
1.4 min.
2 min.
• All times in the above table are approximate.
• Actual recording time for USB storage device
varies depending on the USB storage device’s
ability.
• Make sure that there is minimum of 50 MB free
space when recording into the USB storage
device.
• The length of the music should be longer than
20 seconds for the proper recording.
The making of unauthorized copies of
copy-protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights
and constitute a criminal offense.
This equipment should not be used
for such purposes.
Be responsible
Respect copyrights
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
• Do not turn off this player or extract the
connected USB storage device during Audio CD
recording.
56
Operation
Playing the iPod
1. Connect the iPod firmly.
Connect the iPod
You can enjoy the sound with your iPod. For
details about iPod, refer to the iPod’s User
Guide.
Connect the cradle and
put your iPod on it.
Preparation
•
To view iPod’s Videos and Photos on the TV
screen.
- Be sure to use the video connection
through the VIDEO OUT jack on the rear
panel of this unit. Select the appropriate
video input mode on the TV.
- Depending on the iPod, make sure that
select Videos > Video settings, and then
set TV Out to Ask or On from your iPod.
For details about Video Settings, refer to
the iPod User Guide.
4
Operation
- The viewing photos is available only if this
unit is in iPod IN mode and you can view
photos only as a slide show. You have to
start a slide show on your iPod to view a
photo on a TV. For details about a slide
show, refer to the iPod User Guide.
•
Before connecting the iPod, turn this unit
off and reduce the volume of this unit to its
minimum.
2. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
Enjoying iPod on the screen
1. Connect the iPod firmly.
2. Press HOME MENU (
).
3. Select [Music] or [Movie] using I/i, and
press ENTER ( ).
If you connected the other device
(CD or USB), select the iPod on the menu.
4. Select a content using U/u/I/i, and press
ENTER ( ) to play.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
57
Enjoying the iPod IN mode
You can operate your iPod by using the
supplied remote control and controls on your
iPod.
1. Connect the iPod firmly.
If you turn this unit on, your iPod is
automatically turned on and recharging
starts.
2. Press INPUT/TUNER to select iPod IN mode.
Selects an option in the menu.
B
/ENTER
Starts playback the music or
video.
X
To pause while it is playing. To
resume playing, press B (PLAY)
again.
m/M
Fast-forward or rewind a song
or video
./>
Skip the playback forward or
backward .
REPEAT
To select a desired repeat
mode: Track ( ), All ( ), Off
(No display).
NOTE
This system is compatible with the audio and video
of the iPod(4th generation), iPod nano, iPod classic,
iPod mini, iPod touch and iPhone (iPod shuffle is
not supported.).
• An error message “CHECK IPOD” or “Connected
iPod model is not supported.” appears when:
- your iPod is not available for the function to be
operated.
• An error message “CHECK IPOD” or “Please
update iPod’s software.” appears when:
- your iPod has an old software version.
t Update your iPod software to latest version.
• If this unit displays an error message, follow the
message. An error message “CHECK IPOD” or
“Please check your iPod.” appears when:
- the communication between this unit and
your iPod is failed.
t Undock & re-dock your iPod in this unit.
- your iPod is not connected firmly.
- this unit recognises your iPod as unknown
device.
- your iPod is exceptionally low on power.
t The battery needs to be charged.
t If you charge the battery while iPod is
extremely low in power, it may take longer
to charge.
• You may use the dock adapter which should
be supplied with your iPod to the dock for the
stable use of the iPod. If you need an adapter,
consult your iPod dealer.
• Compatibility with your iPod may vary
depending on the type of your iPod.
• iPod touch and iPhone have any difference in
operation other than iPod. You may need any
additional control to use them with this unit.
(e.g. “slide to unlock”)
• If you use an application, make a call, or send
and receive SMS text message, etc. on iPod
touch or iPhone, disconnect it from iPod dock of
this unit and then use it.
• Depending on your iPod’s software version, it
may not be possible to control your iPod from
this unit. We recommend installing the latest
software version.
• The video quality depends on the video sources
on your iPod.
• If you have a problem with your iPod, please visit
www.apple.com/support/ipod.
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
U/u/I/i
NOTE
58
Operation
Radio Operations
Deleting all the saved stations
Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up. Press CLEAR again.
Then all the saved stations are deleted.
Be sure that the antenna is connected.
(Refer to the page 24)
Listening to the radio
1. Press INPUT/TUNER until TUNER (FM)
appears in the display window. The last
received station is tuned in.
2. Press and hold TUNE (-/+) for about two
seconds until the frequency indication
starts to change. Scanning stops when the
unit tunes in a station. Or Press TUNE (-/+)
repeatedly.
4
Operation
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL (+/- ) on
the remote control.
Improving poor FM reception
Press D (blue) (ST/ MONO) coloured button on
the remote control. This will change the tuner
from stereo to mono and usually improve the
reception.
See information about a radio
station
The FM tuner is supplied with the RDS (Radio
Data System) facility. This shows information
about the radio station being listened to. Press
RDS repeatedly to cycle through the various
data types:
PS
(Programme Service Name)
The name of the channel will
appear in the display
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or
News) will appear in the display.
1. Press INPUT/TUNER until the TUNER (FM)
appears in the display window.
RT
(Radio Text)
A text message contains special
information from the broadcast
station. This text may scroll across
the display.
CT
(Time controlled by the channel)
This shows the time and date as
broadcast by the station.
Presetting the Radio Stations
2. Select the desired frequency by using TUNE
(-/+).
3. Press ENTER ( ) a preset number will flash
in the display window.
4. Press PRESET to select the preset number
you want.
5. Press ENTER ( ). The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
Playing content via
your home network
Accessing a DLNA media server
1. Check the network connection and settings
(pages 28-30).
2. Press
This player can browse and play content from
your PC and DLNA certified media servers
connected on your home network.
59
HOME MENU.
3. Select [Home Link] using U/u/I/i, and
press ENTER ( ).
4. Select a DLNA media server from the list
using U/u, and press ENTER ( ).
About DLNA
This Player is a DLNA Certified digital media
player that can display and play movie,
photo and music content from your DLNAcompatible digital media server (PC and
Consumer Electronics).
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies
with DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software
or other devices may be required. Please refer
to the operating instructions for the software
or device for more information.
If you want to rescan for available media
servers, press the green (B) coloured button.
NOTE
Depending on the media server, this player may
need to get permission from the server.
5. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
The Digital Living Network Alliance (DLNA)
is a cross-industry organization of consumer
electronics, computing industry and mobile
device companies. Digital Living provides
consumers with easy sharing of digital media
through a network in the home.
60
Operation
NOTE
• The file requirements are described on page 11.
• You can use various playback functions. Refer to
pages 40-47.
• The file requirements on page 11 are not always
compatible. There may be some restrictions due
to the file’s features and media server’s ability.
• The thumbnail of the unplayable files can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
Accessing a share folder from
your PC
1. Start your PC that is connected on your
local area network.
2. On your PC, share folders which contain
movie, photo or music files.
3. On the player, check the network
connection and settings (pages 28-30).
4. Press
HOME MENU.
• If there is an unplayable music file in the [Home
Link] menu, the player skips the file and plays
the next file.
5. Select [Home Link] using U/u/I/i, and
press ENTER ( ).
• The subtitle file name and movie file name have
to be the same and located in the same folder.
6. Select a share folder from the list using U/u,
and press ENTER ( ).
• The playback and operating quality of the
[Home Link] function may be affected by your
home network condition.
4
Operation
• The files from removable media such as USB
drive, DVD-drive etc. on your media server may
not be shared properly.
If you want to rescan available media
servers, press the green (B) coloured button.
NOTE
Depending on the share folder, this player may
need to input network user ID and password for
accessing the folder.
7. Select a file using U/u/I/i, and press
ENTER ( ) to play the file.
Downloaded From TheatreSystem-Manual.com Manuals
Operation
61
PC requirements
NOTE
•
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required)
Windows 7®
•
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
•
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
• The file requirements are described on page 11.
• You can use various playback functions. Refer to
pages 40-47.
• The thumbnail of the unplayable files can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
• If there is an unplayable music file in the [Home
Link] menu, the player skips the file and play
next file.
• The subtitle file name and movie file name have
to be the same and located at the same folder.
• The playback and operating quality of the
[Home Link] function may be affected by your
home network condition.
NOTE
If you use Windows® XP or Windows Vista®, visit link
below for more information on file share settings.
• The files on a removable media such as USB
drive, DVD-drive etc. on your PC may not be
shared properly.
Downloaded From TheatreSystem-Manual.com Manuals
4
Operation
• You may experience connection problems
depending on your PC’s environment.
62
Operation
Entering a network user ID and the
password
Depending on your PC’s environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2. Use U/u/I/i to select a character then
press ENTER ( ) to confirm your selection
on the keyboard menu.
3. When you finish entering the network user
ID and password, select [OK] using U/u/I/
i and press ENTER ( ) to access the folder.
The network user ID and password will be
remembered after accessing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press red (A) coloured button
to un-tick the [Remember] check box
before accessing the folder.
To enter a letter with an accent mark, select
the letter from the extended character set.
Example: Select “D” and then press DISPLAY
( ) to display the extended character set.
Use I/i to select “D” or “Ď” and then press
ENTER ( ).
4
Operation
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
Downloaded From TheatreSystem-Manual.com Manuals
Maintenance
63
5
Maintenance
Notes on Discs
Handling the Unit
Handling Discs
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit,
for maximum protection, re-pack the unit as it
was originally packed at the factory.
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
•
Do not use volatile liquids such as
insecticide spray near the unit.
•
Wiping with strong pressure may damage
the surface.
•
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as
alcohol, benzine, or thinner, as these might
damage the surface of the unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Maintaining the Unit
The unit is a high-tech, precision device. If
the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished. For details, please contact your
nearest authorized service centre.
Downloaded From TheatreSystem-Manual.com Manuals
5
Maintenance
Cleaning Discs
Keeping the exterior surfaces clean
64
Troubleshooting
6
Troubleshooting
General
6
Troubleshooting
The Power does not turn
on.
•
Plug the power cord into the wall outlet securely.
The unit does not start
playback.
•
Insert a playable disc. (Check the disc type, colour system,
and regional code.)
•
Place the disc with the playback side down.
•
Place the disc on the disc tray correctly inside the guide.
•
Clean the disc.
•
Cancel the rating function or change the rating level.
The angle cannot be
changed.
•
Multi-angles are not recorded on the DVD Video being
played.
The subtitle language
cannot be changed or
turned off.
•
Subtitles are not recorded on the DVD Video being played.
Cannot play MP3/WMA/
JPEG/DivX files.
•
The files are not recorded in a format that the unit can play.
•
The unit does not support the codec of the movie file.
The remote control does
not work properly.
•
The remote control is not pointed at the remote sensor of
the unit.
•
The remote control is too far from the unit.
•
There is an obstacle in the path between the remote control
and the unit.
•
The battery in the remote control is exhausted.
Downloaded From TheatreSystem-Manual.com Manuals
Troubleshooting
65
Picture
There is no picture.
Picture noise appears
•
Select the appropriate video input mode on the TV so the
picture from the unit appears on the TV screen.
•
Connect the video connection securely.
•
Check the [HDMI Colour Setting] in the [Setup] menu is
set to the appropriate item that conforms to your video
connection.
•
Your TV may not support the resolution you have set on the
player. Change the resolution to one that your TV accepts.
•
The player’s HDMI OUT jack is connected to a DVI device that
does not support copyright protection.
•
You are playing a disc recorded in a colour system that is
different from your TV.
•
Set the resolution to one that your TV accepts.
Sound
There is no sound or the
sound is distorted.
•
The unit is in scan, slow motion, or pause mode.
•
The sound volume is low.
•
Check the speaker cable connection. (page 16)
6
Troubleshooting
Downloaded From TheatreSystem-Manual.com Manuals
66
Troubleshooting
Network
BD-LIVE feature does not
work.
•
The connected USB storage may not have enough space.
Connect the USB storage with at least 1GB free space.
•
Ensure that the unit is correctly connected to the local area
network and can access the internet (see page 28).
•
Your broadband speed may not be fast enough to use the
BD-LIVE features. Contact your Internet Service Provider (ISP)
and increase the broadband speed to suit the unit’s.
•
The [BD-LIVE connection] option in the [Setup] menu is set
to [Prohibited]. Set the option to [Permitted].
Design and specifications are subject to change without notice.
Updates
Note that information on this product is available on the Pioneer website. Please check the
website for information on updating or servicing your Blu-ray Disc PLAYER.
6
Troubleshooting
Downloaded From TheatreSystem-Manual.com Manuals
Appendix
67
7
Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your PIONEER TV using the
buttons below.
TV Control
Buttons
Operation
1 (TV Power)
Turn the TV on or off.
INPUT
Switch the TV’s input source
between the TV and other
input sources.
CH +/-
Scan up or down through
memorized channels.
VOL +/-
Adjust the volume of the
TV.
You can operate your TV with the supplied
remote control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the
table below).
Manufacturer
Code Number
Pioneer
1(Default)
Sony
2, 3
Panasonic
4, 5
Samsung
6, 7
LG
8, 9
2. Release the 1 (TV POWER) button to
complete setting.
Depending on your TV, some or all buttons
may not function on the TV, even after
entering the correct manufacturer code. When
you replace the batteries of the remote, the
code number you have set may be reset to
the default setting. Set the appropriate code
number again.
NOTE
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Downloaded From TheatreSystem-Manual.com Manuals
Appendix
Button
Setting up the remote to
control your TV
7
68
Appendix
Area Code List
Choose an area code from this list.
Area
Afghanistan
Appendix
7
Code Area
AF Fiji
Code Area
Code Area
Code
FJ Monaco
MC Singapore
SG
Argentina
AR Finland
FI Mongolia
MN Slovak Republic
SK
Australia
AU France
FR Morocco
MA Slovenia
SI
Austria
AT Germany
DE Nepal
NP South Africa
ZA
Belgium
BE Great Britain
GB Netherlands
NL South Korea
KR
Bhutan
BT Greece
GR Netherlands
GL Antilles
Bolivia
BO Greenland
Brazil
BR Hong Kong
Cambodia
KH Hungary
Canada
CA India
Chile
CL Indonesia
China
CN Israel
Colombia
CO Italy
Congo
CG Jamaica
Costa Rica
CR Japan
Croatia
HR Kenya
Czech Republic
CZ Kuwait
Denmark
DK Libya
Ecuador
EC Luxembourg
Egypt
EG Malaysia
El Salvador
SV Maldives
Ethiopia
ET Mexico
HK New Zealand
HU Nigeria
IN Norway
ID Oman
IL Pakistan
IT Panama
JM Paraguay
JP Philippines
KE Poland
KW Portugal
LY Romania
LU Russian
Federation
MY
Saudi Arabia
MV
Senegal
MX
Downloaded From TheatreSystem-Manual.com Manuals
Spain
AN Sri Lanka
NZ Sweden
NG Switzerland
NO Taiwan
ES
LK
SE
CH
TW
OM Thailand
PK Turkey
TH
PA Uganda
PY Ukraine
UG
PH United States
PL Uruguay
TR
UA
US
UY
PT Uzbekistan
RO Vietnam
UZ
Zimbabwe
ZW
RU
SA
SN
VN
Appendix
69
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
Language
Code Language
Code Language
Code Language
Code
6565
French
7082
Lithuanian
7684
Sindhi
8368
Afrikaans
6570
Frisian
7089
Macedonian
7775
Singhalese
8373
Albanian
8381
Galician
7176
Malagasy
7771
Slovak
8375
Ameharic
6577
Georgian
7565
Malay
7783
Slovenian
8376
Arabic
6582
German
6869
Malayalam
7776
Spanish
6983
Armenian
7289
Greek
6976
Maori
7773
Sudanese
8385
Assamese
6583
Greenlandic
7576
Marathi
7782
Swahili
8387
Aymara
6588
Guarani
7178
Moldavian
7779
Swedish
8386
Azerbaijani
6590
Gujarati
7185
Mongolian
7778
Tagalog
8476
Bashkir
6665
Hausa
7265
Nauru
7865
Tajik
8471
Basque
6985
Hebrew
7387
Nepali
7869
Tamil
8465
Bengali; Bangla 6678
Hindi
7273
Norwegian
7879
Telugu
8469
Bhutani
6890
Hungarian
7285
Oriya
7982
Thai
8472
Bihari
6672
Icelandic
7383
Panjabi
8065
Tonga
8479
Breton
6682
Indonesian
7378
Pashto, Pushto 8083
Turkish
8482
Bulgarian
6671
Interlingua
7365
Persian
7065
Turkmen
8475
Burmese
7789
Irish
7165
Polish
8076
Twi
8487
Byelorussian
6669
Italian
7384
Portuguese
8084
Ukrainian
8575
Chinese
9072
Japanese
7465
Quechua
8185
Urdu
8582
Croatian
7282
Kannada
7578
8590
6783
Kashmiri
7583
Rhaeto-Romance
8277
Uzbek
Czech
Vietnamese
8673
Danish
6865
Kazakh
7575
Rumanian
8279
Volapük
8679
Dutch
7876
Kirghiz
7589
Russian
8285
Welsh
6789
English
6978
Korean
7579
Samoan
8377
Wolof
8779
Esperanto
6979
Kurdish
7585
Sanskrit
8365
Xhosa
8872
Estonian
6984
Laothian
7679
Scots Gaelic
7168
Yiddish
7473
Faroese
7079
Latin
7665
Serbian
8382
Yoruba
8979
Zulu
9085
Fiji
7074
Latvian, Lettish 7686
Serbo-Croatian 8372
Finnish
7073
Lingala
Shona
7678
Downloaded From TheatreSystem-Manual.com Manuals
8378
Appendix
Afar
7
70
Appendix
Video output resolution
When the non-copy protected media is playing back
Video Out
HDMI OUT
Resolution
576i (480i)
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
576p (480i)
576i (480i)
576p (480p)
576p (480p)
576p (480p)
720p
720p
720p
1080i
1080i
1080i
1080p / 24 Hz
1080p / 24 Hz
576i (480i)
1080i
1080p / 50 (60) Hz
1080p / 50 (60) Hz
576i (480i)
1080i
When the copy protected media is playing back
Video Out
HDMI OUT
Resolution
576i (480i)
576p (480p)
576p (480p)
720p
720p
576i (480i)
576p (480p)
1080i
1080i
576i (480i)
576p (480p)
576p (480p)
1080p / 24 Hz
1080p / 24 Hz
576i (480i)
576p (480p)
1080p / 50 (60) Hz
1080p / 50 (60) Hz
576i (480i)
576p (480p)
Appendix
•
For the 576i (480i) resolution setting, real
output resolution of HDMI OUT will change
to 576p (480p).
•
If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
•
HDMI disconnected
576i (480i)
576p (480p)
HDMI OUT connection
7
COMPONENT VIDEO OUT
HDMI connected
If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
•
The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
COMPONENT VIDEO OUT connection
BD or DVD could prevent up-scaling on
analogue output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 576i (480i) resolution.
Downloaded From TheatreSystem-Manual.com Manuals
Appendix
71
Trademarks and Licences
“Blu-ray Disc” and
are trademarks.
HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC in the United
States and other countries.
“BD-LIVE” logo is a trademark of Blu-ray Disc
Association.
“BONUSVIEW” is trademark of Blu-ray Disc
Association.
is a trademark of DVD Format/Logo Licensing
Corporation.
TM
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
DLNA and DLNA CERTIFIED are trademarks and /
or service marks of Digital Living Network Alliance.
DivX is a registered trademark of DivX, Inc., and is
used under licence.
Appendix
“x.v.Colour” or “x.v.Colour” is a trademark of Sony
Corporation.
7
Manufactured under licence from Dolby
Laboratories. Dolby, and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under licence under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS-HD, DTS-HD Master
Audio l Essential and the DTS logos are trademarks
of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
Downloaded From TheatreSystem-Manual.com Manuals
72
Appendix
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and / or other countries.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
This product is licenced under the AVC patent
portfolio licence and VC-1 patent portfolio licence
for the personal and non-commercial use of a
consumer to (i) encode video in compliance
with the AVC Standard and VC-1 Standard (“AVC/
VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in
a personal and non-commercial activity and/or
was obtained from a video provider licenced to
provide AVC/VC-1 Video. No licence is granted
or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
This product includes technology owned by Microsoft
Corporation and cannot be used or distributed
without a license from Microsoft Licensing, Inc.
®
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth
wireless technology does not incur any charges.
A mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Pioneer Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
iPhone is a trademark of Apple Inc.
Appendix
7
“Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod
and has been certified by the developer to meet
Apple performance standards.
“Works with iPhone” means that an electronic
accessory has been designed to connect
specifically to iPhone and has been certified
by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Downloaded From TheatreSystem-Manual.com Manuals
Appendix
Specifications
73
Tuner
• FM Tuning Range:
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
General
• Power requirements:
AC 220-240 V, 50/ 60 Hz
• Power consumption:
150 W
In Standby mode: Less than 0.5W
• Dimensions (W x H x D):
Approx. 430 × 64 × 304 mm
• Net Weight (Approx.):
3.6 kg
• Operating temperature:
41 °F to 95 °F (5 °C to 35 °C)
• Operating humidity:
5 % to 90 %
• Bus Power supply (USB):
DC 5V
500 mA
Inputs/ Outputs
• VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
• HDMI OUT (video/audio):
19 pin (HDMI standard, Type A, Version 1.3)
• Power output, (PEAK), (4Ω/3Ω)
Total
1100 W
Front
180 W x 2
Centre
180 W
Rear
180 W x 2
Sub-Woofer
200 W (Passive)
• Power output, (RMS), THD 10% (4Ω/3Ω)
Total
930 W
Front
150 W x 2
Centre
150 W
Rear
150 W x 2
Sub-Woofer
180 W (Passive)
System
• Laser:
Semiconductor laser
Wavelength: 405 nm / 650 nm
• Signal system:
Standard NTSC/PAL colour TV system
• Frequency response:
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
• LAN port:
Ethernet jack x 1, 10BASE-T/100BASE-TX
Appendix
• COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1,
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Amplifier
• Analogue AUDIO IN:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
• DIGITAL IN (OPTICAL 1/2):
3 V (p-p), Optical jack x 2
• PORTABLE IN:
0.5 Vrms (3.5 mm stereo jack)
Downloaded From TheatreSystem-Manual.com Manuals
7
74
Appendix
Speakers for BCS-707
Speakers for BCS-303
S-BD707
S-BD303
• Front/Surround speaker (Left/ Right)
Type:
2 Way
Impedance Rated:
4Ω
Net Dimensions
260 x 1097 x 260 mm
(W x H x D):
Net Weight:
3.8 kg
• Front/Surround speaker (Left/ Right)
Type:
1 Way
Impedance Rated:
4Ω
Net Dimensions
96 x 96 x 85 mm
(W x H x D):
Net Weight:
0.4 kg
• Centre speaker
Type:
Impedance Rated:
Net Dimensions
(W x H x D):
Net Weight:
• Centre speaker
Type:
Impedance Rated:
Net Dimensions
(W x H x D):
Net Weight:
1 Way
4Ω
300 x 87x 65 mm
0.6 kg
S-BD707SW
• Subwoofer
Type:
Impedance Rated:
Net Dimensions
(W x H x D):
Net Weight:
1 Way 1 speaker
3Ω
130.5 x 420 x 375 mm
• Subwoofer
Type:
Impedance Rated:
Net Dimensions
(W x H x D):
Net Weight:
4.4 kg
Appendix
7
Downloaded From TheatreSystem-Manual.com Manuals
1 Way
4Ω
300 x 87x 65 mm
0.6 kg
1 Way 1 speaker
3Ω
130.5 x 420 x 375 mm
4.4 kg
Appendix
Open source software
notice
The following GPL executables and LGPL libraries
used in this product are subject to the GPL2.0/
LGPL2.1 License Agreements:
GPL EXECUTABLES: Linux kernel 2.6, bash, busybox,
cramfs, dhcpcd, e2fsprogs, fdisk, mkdosfs, mtd-utils,
net-tools, procps, samba-3.0.25b, sysutils, tcpdump,
tftpd, tinylogin, unzip, utelnetd
LGPL LIBRARIES: uClibc, DirectFB, blowfish, cairo,
ffmpeg, iconv, libusb, mpg123
gSOAP Public License 1.3 LIBRARY: gsoap
A copy of the corresponding source code can be
obtained by being charged the fee for distribution.
To obtain a copy, contact your local Pioneer
Customer Support .
You can obtain a copy of the GPL, LGPL licenses
from http://www.gnu.org/licenses/old-licenses/
gpl-2.0.html and http://www.gnu.org/licenses/oldlicenses/lgpl-2.1.html .
Also you can obtain a copy of gSOAP public license
from http://www.cs.fsu.edu/~engelen/license.html.
This product includes
• boost C++: copyright © Beman Dawes 1999-2003
• c-ares : copyright © 1998 by the Massachusetts
Institute of Technology
• curl: copyright © 1996 - 2008, Daniel Stenberg
• expat: copyright © 2006 expat maintainers
• freetype: copyright © 2003 The FreeType Project
(www.freetype.org).
• jpeg: This software is based in part on the work of
the Independent JPEG Group copyright © 1991 –
1998, Thomas G. Lane.
• mng: copyright © 2000-2007 Gerard Juyn, Glenn
Randers-Pehrson
• ntp : copyright © David L. Mills 1992-2006
• OpenSSL:
– cryptographic software written by Eric Young
([email protected]).
– software written by Tim Hudson
([email protected]).
– software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org)
• png: copyright © 2004 Glenn Randers-Pehrson
• portmap : copyright © 1990 The Regents of the
University of California
• ptmalloc : copyright © 2001-2006 Wolfram Gloger
• UnitTest++ : copyright © 2006 Noel Llopis and
Charles Nicholson
• UPnP SDK : copyright © 2000-2003 Intel
Corporation
• strace :
copyright © 1991, 1992 Paul Kranenburg
copyright © 1993 Branko Lankester
copyright © 1993 Ulrich Pegelow
copyright © 1995, 1996 Michael Elizabeth Chastain
copyright © 1993, 1994, 1995, 1996 Rick Sladkey
copyright © 1999,2000 Wichert Akkerman
• xml2 : copyright © 1998-2003 Daniel Veillard
• XML-RPC For C/C++:
copyright © 2001 by First Peer, Inc. All rights
reserved.
copyright © 2001 by Eric Kidd. All rights reserved.
• zlib: copyright © 1995-2002 Jean-loup Gailly and
Mark Adler.
All rights reserved.
Permission is hereby granted, free of charge, to
any person obtaining a copy of this software and
associated documentation files (the “Software”), to
deal in the Software without restriction, including
without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to
whom the Software is furnished to do so, subject to
the following conditions:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Downloaded From TheatreSystem-Manual.com Manuals
Appendix
This software is based in part on the work of the
Independent JPEG Group copyright © 1991 - 1998,
Thomas G. Lane.
75
7
76
Appendix
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
Manufacturer:
EU Representative’s:
Pioneer Corporation
Pioneer Europe NV
Haven 1087, Keetberglaan 1,
9120 Melsele, Belgium
1-1, SHIN-OGURA, SAIWAI-KU,
KAWASAKI-SHI,
KANAGAWA-KEN 212-0031, JAPAN
Appendix
7
http://www.pioneer.eu
English:
Hereby, Pioneer, declares that this BCS-707
(BCS-303) is in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC.
Dansk:
Undertegnede Pioneer erklærer herved,
at følgende udstyr BCS-707 (BCS-303)
overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Suomi:
Pioneer vakuuttaa täten että BCS-707 (BCS303) tyyppinen laite on direktiivin 1999/5/
EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Deutsch:
Hiermit erklärt Pioneer, dass sich dieses BCS707 (BCS-303) in Übereinstimmung mit den
grundlegenden Anforderungen und den
anderen relevanten Vorschriften der Richtlinie
1999/5/EG.
Nederlands:
Hierbij verklaart Pioneer dat het toestel BCS707 (BCS-303) in overeenstemming is met
de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Français:
Par la présente Pioneer déclare que
l’appareil BCS-707 (BCS-303) est conforme
aux exigences essentielles et aux autres
dispositions pertinentes de la directive
1999/5/CE.
Svenska:
Härmed intygar Pioneer att denna BCS-707
(BCS-303) står I överensstämmelse med de
väsentliga egenskapskrav ch övriga relevanta
bestämmelser som framgår av direktiv
1999/5/EG.
Ελληνικά:
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Pioneer ΔΗΛΩΝΕΙ ΟΤΙ
BCS-707 (BCS-303) ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/
ΕΚ.
Italiano:
Con la presente Pioneer dichiara che questo
BCS-707 (BCS-303) è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Español:
Por medio de la presente Pioneer declara
que el BCS-707 (BCS-303) cumple con los
requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Downloaded From TheatreSystem-Manual.com Manuals
Appendix
Português:
Slovenčina:
Pioneer declara que este BCS-707 (BCS-303)
está conforme com os requisitos essenciais e
outras disposições da Directiva 1999/5/CE.
Pioneer týmto vyhlasuje, že BCS-707 (BCS303) spĺňa základné požiadavky a všetky
príslušné ustanovenia Smernice 1999/5/ES.
Čeština:
Slovenščina:
Pioneer tímto prohlašuje, že tento BCS707 (BCS-303) je ve shodě se základními
požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Pioneer izjavlja, da je ta BCS-707 (BCS-303) v
skladu z bistvenimi zahtevami in ostalimi
relevantnimi določili direktive 1999/5/ES.
Eesti:
Käesolevaga kinnitab Pioneer seadme BCS707 (BCS-303) vastavust direktiivi 1999/5/
EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
Magyar:
Alulírott, Pioneer nyilatkozom, hogy a BCS707 (BCS-303) megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Latviešu valoda:
Lietuvių kalba:
Šiuo Pioneer deklaruoja, kad šis BCS-707 (BCS303) (BCS-303) atitinka esminius reikalavimus
ir kitas 1999/5/EB Direktyvos nuostatas.
Malti:
Hawnhekk, Pioneer jiddikjara li dan BCS-707
(BCS-303) jikkonforma mal-ħtiġijiet essenzjali
u ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Română:
Prin prezenta, Pioneer declara ca acest
BCS-707 (BCS-303) este in conformitate
cu cerintele esentiale si alte prevederi ale
Directivei 1999/5/EU.
български:
С настоящето, Pioneer декларира, че
този BCS-707 (BCS-303) отговаря на
основните изисквания и други съответни
постановления на Директива 1999/5/EC.
Polski:
Niniejszym Pioneer oświadcza, że BCS707 (BCS-303) jest zgodny z zasadniczymi
wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Norsk:
Pioneer erklærer herved at utstyret BCS707 (BCS-303) er i samsvar med de
grunnleggende krav og øvrige relevante krav
i direktiv 1999/5/EF.
Appendix
Ar šo Pioneer deklarē, ka BCS-707 (BCS303) atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem
noteikumiem.
77
Íslenska:
Hér með lýsir Pioneer yfir því að BCS-707
(BCS-303) er í samræmi við grunnkröfur
og aðrar kröfur, sem gerðar eru í tilskipun
1999/5/EC.
Downloaded From TheatreSystem-Manual.com Manuals
7
Downloaded From TheatreSystem-Manual.com Manuals
Downloaded From TheatreSystem-Manual.com Manuals
http://www.pioneer.co.uk
http://www.pioneer.eu
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-91784270
Printed in Indonesia / Imprimé en Indonesia
Downloaded From TheatreSystem-Manual.com Manuals
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement