Chauvet | Rogue R1 Spot | User manual | Chauvet Rogue R1 Spot User manual

Chauvet Rogue R1 Spot User manual
User Manual
Edition Notes
Edition
Notes
The Rogue™ R1 Spot User Manual Rev. 5 covers the description, safety precautions,
installation, programming, operation, and maintenance of the Rogue™ R1 Spot. CHAUVET®
released this edition of the Rogue™ R1 Spot User Manual in September 2014.
Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Copyright Notice
Manual Use
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted
triangle, and all other trademarks in this manual pertaining to services, products, or marketing
statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other
product names, logos, brands, company names, and other trademarks featured or referred to
within this document are the property of their respective trademark holders.
CHAUVET® owns the content of this User Manual in its entirety, including but not limited to
pictures, logos, trademarks, and resources.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the usage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose without
written consent from CHAUVET®.
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Document
Printing
Intended Any person in charge of installing, operating, and/or maintaining this product should completely
Audience read through the guide that shipped with the product, as well as this manual, before installing,
Disclaimer
Document
Revision
operating, or maintaining this product.
CHAUVET® believes that the information contained in this manual is accurate in all respects.
However, CHAUVET® assumes no responsibility for any errors or omissions in this document.
CHAUVET® reserves the right to revise and make changes to the content of this document
without obligation that CHAUVET® notify any person or company of such revision or changes.
This does not in any way constitute a commitment by CHAUVET® to make such changes.
CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.
The Rogue™ R1 Spot User Manual Rev. 5 supersedes all previous versions of this manual.
Discard any older versions of this manual and replace with this version. Go to
www.chauvetprofessional.com for the latest version.
Author
D. Couppe
Date
9/25/14
Rogue™ R1 Spot User Manual Rev. 5
Editor
A. Leon
Date
9/25/14
Table of Contents
Table of Contents
1. Before You Begin ...................................................................................................................................... 1
What Is Included ........................................................................................................................................................... 1
Claims .......................................................................................................................................................................................... 1
Manual Conventions .................................................................................................................................................................... 1
Symbols ....................................................................................................................................................................................... 1
Product At A Glance ..................................................................................................................................................... 2
Safety Notes ................................................................................................................................................................. 2
Personal Safety ............................................................................................................................................................................ 2
Mounting And Rigging .................................................................................................................................................................. 2
Power And Wiring ........................................................................................................................................................................ 2
Operation ..................................................................................................................................................................................... 2
2. Introduction ............................................................................................................................................... 3
Description .................................................................................................................................................................... 3
Features ........................................................................................................................................................................ 3
Overview ....................................................................................................................................................................... 4
Dimensions ................................................................................................................................................................... 5
3. Setup .......................................................................................................................................................... 6
AC Power ...................................................................................................................................................................... 6
AC Plug ........................................................................................................................................................................................ 6
Fuse Replacement ....................................................................................................................................................................... 6
Power Linking ............................................................................................................................................................... 6
DMX Linking.................................................................................................................................................................. 6
DMX Personalities........................................................................................................................................................................ 6
Gobo Wheel .................................................................................................................................................................. 7
Color Wheel .................................................................................................................................................................. 8
Mounting ....................................................................................................................................................................... 9
Orientation ................................................................................................................................................................................... 9
Rigging ......................................................................................................................................................................................... 9
Procedure .................................................................................................................................................................................... 9
4. Operation ................................................................................................................................................. 10
Control Panel Description ........................................................................................................................................... 10
Control Options .......................................................................................................................................................................... 10
Programming.............................................................................................................................................................................. 10
Menu Map ................................................................................................................................................................... 11
Menu Map (Cont.) ....................................................................................................................................................... 12
Address ....................................................................................................................................................................... 13
Set the DMX Address................................................................................................................................................................ 13
Run Mode ................................................................................................................................................................... 13
DMX Personality ........................................................................................................................................................................ 13
Auto Test.................................................................................................................................................................................... 13
Manual Test ............................................................................................................................................................................... 13
Setup........................................................................................................................................................................... 14
Pan Reverse .............................................................................................................................................................................. 14
Tilt Reverse ................................................................................................................................................................................ 14
Screen Reverse ......................................................................................................................................................................... 14
Pan Angle .................................................................................................................................................................................. 14
Tilt Angle .................................................................................................................................................................................... 14
Pan and Tilt Movement BlackOut ............................................................................................................................................... 14
Color Movement BlackOut ......................................................................................................................................................... 14
Gobo Movement BlackOut ......................................................................................................................................................... 14
Reset Function ........................................................................................................................................................................... 15
Factory Reset Function .............................................................................................................................................................. 15
System Information ..................................................................................................................................................... 16
Rogue™ R1 Spot User Manual Rev. 5
-i-
Table of Contents
Offset Mode ................................................................................................................................................................ 16
Pan............................................................................................................................................................................................. 16
Tilt .............................................................................................................................................................................................. 16
Gobo .......................................................................................................................................................................................... 16
Gobo Rotate ............................................................................................................................................................................... 16
Gobo 2 ....................................................................................................................................................................................... 16
Color 1 ....................................................................................................................................................................................... 16
Color 2 ....................................................................................................................................................................................... 16
Prism .......................................................................................................................................................................................... 16
Focus ......................................................................................................................................................................................... 16
Iris .............................................................................................................................................................................................. 16
Frost ........................................................................................................................................................................................... 16
Dimmer ...................................................................................................................................................................................... 16
FO. Yellow Edge ........................................................................................................................................................................ 16
DMX Values ................................................................................................................................................................ 17
DMX Values (Cont.) .................................................................................................................................................... 18
DMX Values (Cont.) .................................................................................................................................................... 19
DMX Values (Cont.) .................................................................................................................................................... 20
DMX Values (Cont.) .................................................................................................................................................... 21
DMX Values (Cont.) .................................................................................................................................................... 22
5. Technical Information ............................................................................................................................. 23
Product Maintenance .................................................................................................................................................. 23
6. Technical Specifications......................................................................................................................... 24
Returns ....................................................................................................................................................................... 25
Contact Us .................................................................................................................................................. 25
-ii-
Rogue™ R1 Spot User Manual Rev. 5
Before You Begin
1. BEFORE YOU BEGIN
What Is
Included
Claims
· Rogue™ R1 Spot
· Neutrik® powerCON® power cord
· 2 Omega brackets with mounting hardware
· Warranty Card
· Quick Reference Guide
Carefully unpack the product immediately and check the box to make sure all the parts are in
the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure
to report damage to the carrier immediately may invalidate your claim. In addition, keep the box
and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or
concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual
Conventions
Convention
1–512
50/60
<SET>
Settings
MENU>Settings
1–10
Yes/No
ON
Symbols
Meaning
A range of values in the text
A set of mutually exclusive values in the text
A button on the product’s control panel
A product function or a menu option
A sequence of menu options
A range of menu values from which to choose in a menu
A set of two mutually exclusive menu options in a menu
A unique value to be entered or selected in a menu
Symbols
Meaning
Critical installation, configuration, or operation information. Failure to
comply with this information may cause the product not to work,
damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply
with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.
Rogue™ R1 Spot User Manual Rev. 5
-1-
Before You Begin
Product At A
Glance
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave
Safety Notes
x
x
x
P
x
Auto Programs
Auto-Ranging Power
Supply
Replaceable Fuse
User-Serviceable
x
P
P
x
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians. Do
not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety ·
Mounting And
Rigging
Power And
Wiring
Operation
-2-
Avoid direct eye exposure to the light source while the product is on.
Always disconnect this product from its power source before servicing.
Always connect this product to a grounded circuit to avoid the risk of electrocution.
Do not touch this product’s housing during operation because it may be very hot.
This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture. (IP20)
· Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
· This product weighs 36 lb (16.3 kg). Always ask for help when mounting this product to
avoid personal injuries or damage to the product.
· Make sure there are no flammable materials close to this product while it is operating.
· Always carry this product by the handles. Do not carry from the head.
· When hanging this product, always secure to a fastening device using a safety cable.
· Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
· Never connect this product to a dimmer pack or rheostat.
· Never disconnect this product by pulling or tugging on the power cable.
· Do not operate this product if you see damage to the housing, lenses, or cables. Have the
damaged parts replaced by an authorized technician at once.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· Do not aim this product toward the Sun. The lenses could concentrate the solar energy
and cause internal overheating.
· The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
·
·
·
·
Rogue™ R1 Spot User Manual Rev. 5
Introduction
2. INTRODUCTION
Description The Rogue™ R1 Spot is a compact, electronic, moving yoke product equipped with a 140-watt
LED. It includes 1 color wheel with 8 colors plus white and 2 gobo wheels for gobo morphing. It
also includes a rotating 3-facet prism, remote focus, and iris.
Features ·
·
·
·
·
·
·
·
·
·
·
·
·
Compact, moving yoke fixture with a prism and motorized focus
Precision-designed optics for hard-edged effects
Extremely quiet for operation in any situation
Color wheel:
· 8 colors + Open (white)
· Split/linear colors
· Rainbow color spin at variable speed
Gobo wheel 1:
· 7 slot-n-lock gobos + Open
· Indexed, rotating gobo wheel with gobo shake
· Interchangable
· Gobo wheel spin at variable speed
Gobo wheel 2:
· 8 gobos + Open
· Gobo wheel spin at variable speed
3-facet rotating prism
DMX channels: 16 or 19
Pan: 540°
Tilt: 270°
Reset over DMX
Electronic power supply
3- and 5-pin DMX input and output connectors
Rogue™ R1 Spot User Manual Rev. 5
-3-
Introduction
Overview
Fuse
Power
Switch
DMX
Data In
Control Panel
DMX
Data
Out
Power Out
Power In
Rear View
Front View
Handle
Top View
-4-
Side View
Rogue™ R1 Spot User Manual Rev. 5
Introduction
Dimensions
14.17 in
360 mm
13.98 in
355 mm
9.21 in
234 mm
8.94 in
227 mm
11.10 in
282 mm
11.34 in
288 mm
10.55 in
268 mm
17.60 in
447 mm
4.53 in
115 mm
Rogue™ R1 Spot User Manual Rev. 5
-5-
Setup
3. SETUP
AC Power
Each Rogue™ R1 Spot has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Rogue™ R1
Spot, refer to the label affixed to the product. You can also refer to the Technical Specifications
chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the CHAUVET® website:
www.chauvetlighting.com/download/pro.
Always connect this product to a protected circuit with an appropriate electrical ground
to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug The Rogue™ R1 Spot comes with a power input cord terminated with a Neutrik® powerCON®
A connector on one end and an Edison plug on the other end (U.S. market). If the power input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
AC Neutral
AC Ground
Black
White
Green/Yellow
Brown
Blue
Green/Yellow
Yellow or Brass
Silver
Green
Fuse 1. Disconnect this product from the power outlet.
Replacement 2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with a another fuse of the same type and rating
(F 4 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
Power Linking
DMX Linking
DMX
Personalities
-6-
The Rogue™ R1 Spot supports power linking. You can power link up to 6 products at 120 V; up
to 12 at 208 V; or up to 13 at 230 V.
This product comes with a power input cord. Power linking cables are available from
CHAUVET® for purchase.
You can link the Rogue™ R1 Spot to a DMX controller using a 3- or 5-pin DMX connection. If
using other DMX-compatible products with the Rogue™ R1 Spot, you can control each
individually with a single DMX controller.
The Rogue™ R1 Spot uses a 3- or 5-pin DMX data connection for the 16- and 19-channel DMX
personalities.
· Refer to the Introduction chapter for a brief description of each DMX personality.
· Refer to the Operation chapter to learn how to configure the Rogue™ R1 Spot to work in
these personalities.
· The DMX Values section provides you with detailed information regarding the DMX
personalities.
If you are not familiar with or need more information about DMX standards, Master/Slave
connectivity, or the DMX cables needed to link this product to a DMX controller,
download
the
DMX
Primer
from
the
CHAUVET®
website:
www.chauvetlighting.com/download/pro.
Rogue™ R1 Spot User Manual Rev. 5
Setup
Gobo Wheel
The Rogue™ R1 Spot includes two gobo wheels: 7 rotating gobos plus open on wheel 1 and 8
fixed gobos plus open on wheel 2. The diagram shows the gobo number on the wheel, as
numbered in the DMX Values tables.
Open
26.9 mm
22.5 mm
1
7
2
Gobo Wheel 1
6
Metal Gobo Dimensions
Gobo Wheel 1
3
5
25.9 mm
22.5 mm
4
8
1
7
2
Glass Gobo Dimensions
Gobo Wheel 1
Gobo Wheel 2
3
6
5
4
The gobos on Gobo Wheel 2 are not removeable.
Rogue™ R1 Spot User Manual Rev. 5
-7-
Setup
Color Wheel
The Rogue™ R1 Spot includes a color wheel with 8 fixed colors plus open (white) as indicated
below. The diagram shows the color names on the wheel, as shown in the DMX Values tables.
Blue
CTO 3200
Yellow
5
6
Magenta
4
7
Green
3
8
Purple
2
1
Orange
Open
(White)
Red
-8-
Rogue™ R1 Spot User Manual Rev. 5
Setup
Mounting
Orientation
Before mounting this product, read and follow the Safety Notes. For our CHAUVET® line of
mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging CHAUVET® recommends using the following general guidelines when mounting this product.
·
Procedure
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
· When hanging this product, always secure to a fastening device using a safety cable (such
as CH-05 from CHAUVET®).
The Rogue™ R1 Spot comes with a preinstalled mounting surface to which you will be able to
attach the 2 included omega brackets. Make sure the clamps (such as CLP-15 from
CHAUVET®) are capable of supporting the weight of this product. Use two mounting points per
product. In addition, use a safety cable to link the product to the structure.
Mounting Clamp
Safety Cable
Omega Brackets
Mounting Diagram
Mounting
Surface
Floor Mounting
Rogue™ R1 Spot User Manual Rev. 5
Overhead Mounting
-9-
Operation
4. OPERATION
Control Panel
Description
Button
Function
<MENU>
<ENTER>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value in to the current function
Navigates upward through the menu list or increases the numeric
value when in a function
Navigates downward through the menu list or decreases the
numeric value when in a function
<UP>
<DOWN>
Control Options You can set the Rogue™ R1 Spot starting address in the 001–512 DMX range. This
Programming
-10-
enables control of up to 26 products in the 19-channel 19CH personality.
Refer to the Menu Map to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
· To enter programming mode, press any key on the control panel to wake the opening
screen. Press <MENU> until you see one of the main level options.
· To highlight a menu option or to change a setting, press <UP> or <DOWN>.
· To change menu levels as shown in the Menu Map, press <ENTER> or <MENU>.
This is equivalent to moving right and left of the Menu Map, respectively.
· To accept the current or new value, press <ENTER>.
· To return to the previous menu without making changes, press <MENU>.
· To exit programming mode, press <MENU> until you see one of the main level
options, the opening screen, or do not press any button for 30 seconds and the
screen will automatically revert to the opening screen.
Rogue™ R1 Spot User Manual Rev. 5
Operation
Menu Map
Main Level
Programming Levels
Address
001–512
Description
Sets the DMX starting address
16CH
19CH
DMX
Auto Test
Pan
Pan Fine
Tilt
Tilt Fine
Runs the product’s test sequence
P/T Speed
Dimmer
Dimmer Fine
Shutter
Color
Gobo
Run Mode
Manual Test
Gobo Rot
Gobo2
Focus
Prism
R-Prism
Iris
Selects the DMX mode
000–255
Allows manual control of all settings from the
control panel
P/T Macro
P/T
Ma.Speed
Special
Function
Rogue™ R1 Spot User Manual Rev. 5
-11-
Operation
Menu Map (Cont.)
Main Level
Programming Levels
Pan Reverse
Tilt Reverse
Screen Reverse
Pan Angle
Tilt Angle
BL.O.P/T Move
BL.O.ColorMove
Setup
BL.O.GoboMove
Pan/Tilt
Prism
Reset
Function
Color
Gobo&R/
Gobo2
Focus/Iris
All
Factory Settings
Ver:
Sys Info
-12-
Running Mode:
Dmx Address:
Temperature:
Description
YES
Reverse pan operation
NO
YES
NO
YES
NO
540
360
Normal pan operation
Reverse tilt operation
Normal tilt operation
Rotates control screen view 180°
Normal control screen view
Selects the 540° pan angle range
Selects the 360° pan angle range
180
270
180
90
YES
NO
Selects the 180° pan angle range
Selects the 270° tilt angle range
Selects the 180° tilt angle range
Selects the 90° tilt angle range
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
Defines the pan/tilt move-in-black delay
Defines the color change move-in-black delay
Defines the gobo change move-in-black delay
Resets pan/tilt functions to the home position
Resets all prism functions to the home position
Resets all color functions to the home position
Resets all gobo functions to the home position
Resets the focus and iris functions to the home
position
Resets all functions to the home position
Reverts the product back to the original factory
settings
Displays the software version
Displays the current running mode
Displays the current DMX address
Displays the product’s temperature in Celsius
Rogue™ R1 Spot User Manual Rev. 5
Operation
Address
Set the
DMX Address
Run Mode
DMX Personality
This programming level sets the DMX starting address.
· Starting from the Main Level screen, select Address, press <ENTER>.
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison. This option
sets the products DMX address.
· Change the starting address (001–512), press <ENTER>.
This programming level sets the DMX personality and controls the different test modes.
· Starting from the Main Level screen, select Run Mode, press <ENTER>.
This option selects which DMX Personality the product uses.
1. Highlight DMX, press <ENTER>.
2. Select the DMX personality 16CH or 19CH, press <ENTER>.
·
Auto Test
See the DMX Values section for the highest starting address you can select for
each personality.
· Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
This option runs every attribute individually through 1 cycle.
· Highlight Auto Test, press <ENTER>.
The Auto Test will end after 1 full cycle. You can stop the test by pressing <MENU>
at any time.
Manual Test This option allows you to run each attribute individually or as a group.
1. Highlight Manual Test, press <ENTER>.
2. Highlight the desired attribute listed on the control panel screen, press <ENTER>.
· Set the attribute value (000–255), press <ENTER>.
3. Repeat step 2 for the other attributes.
When exiting the Manual Test level, the values of all tested channels will go back
to zero.
Rogue™ R1 Spot User Manual Rev. 5
-13-
Operation
Setup
Pan Reverse
Tilt Reverse
Screen Reverse
Pan Angle
Tilt Angle
Pan and Tilt
Movement BlackOut
Color Movement
BlackOut
Gobo Movement
BlackOut
-14-
This programming level controls the product’s head movement, lamp adjustments, and
maintenance timer.
· Starting from the Main Level screen, select Setup, press <ENTER>.
Reverses the operation of the pan attribute.
1. Highlight Pan Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Reverses the operation of the tilt attribute.
1. Highlight Tilt Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
To invert the control panel screen:
1. Highlight Screen Reverse, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This option assigns pan range.
1. Highlight Pan Angle, press <ENTER>.
2. Select 540, 360, or 180, press <ENTER>.
This option assigns tilt range.
1. Highlight Tilt Angle, press <ENTER>.
2. Select 90, 180, or 270, press <ENTER>.
This option engages the shutter to block all light output whenever the product’s head is in
motion.
1. Highlight BL.O.P/T Move, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This option engages the shutter to block all light output whenever the product’s color
wheel is in motion.
1. Highlight BL.O.ColorMove, press <ENTER>.
2. Select YES or NO, press <ENTER>.
This option engages the shutter to block all light output whenever the product’s gobo
wheel is in motion.
1. Highlight BL.O.GoboMove, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Rogue™ R1 Spot User Manual Rev. 5
Operation
Reset Function This programming level allows the user to reset individual functions to the home position.
· Starting from the Setup screen level, select Reset Function, press <ENTER>.
Pan/Tilt Reset This option resets the Pan/Tilt functions to the home position.
1. Highlight Pan/Tilt, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Prism Reset This option resets the Prism functions to the home position.
1. Highlight Prism, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Color Reset This option resets the Color functions to the home position.
1. Highlight Color, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Gobo&R/Gobo2 This option resets the Gobo&R/Gobo 2 functions to the home position.
Reset 1. Highlight Gobo&R/Gobo2, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Focus/Iris This option resets the Focus/Iris functions to the home position.
Reset 1. Highlight Focus/Iris, press <ENTER>.
2. Select YES or NO, press <ENTER>.
All Reset This option resets the all the functions to the home position.
1. Highlight All, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Factory Reset This reverts the product back to its original factory settings.
Function 1. Starting from the Setup screen level, select Factory Settings, press <ENTER>.
2. Select YES or NO, press <ENTER>.
Rogue™ R1 Spot User Manual Rev. 5
-15-
Operation
System
Information
Offset Mode
Pan
Tilt
Gobo
Gobo Rotate
Gobo 2
Color 1
Color 2
Prism
Focus
Iris
Frost
Dimmer
FO. Yellow Edge
-16-
This programming level shows standard information regarding the product’s operating status.
· Starting from the Main Level screen, select Sys Info, press <ENTER>.
· Ver: The current software version is displayed on the screen.
· Running Mode: The current Running mode is displayed on the screen.
· DMX Address: The current DMX address is displayed on the screen.
· Temperature: The current product temperature is displayed on the screen.
The Offset mode provides fine adjustments for the home position of all the moving parts in the
optical path as well as the pan and tilt movements. This way, when in their home position, the
moving parts do not show any border or reduce the light output.
1. Starting from the Main Level screen, press and hold <MENU> until the password screen
appears.
2. Using <UP> to increase the number value and <DOWN> to move to the next column,
enter 2323, press <ENTER>. This brings you into the Zero Adjust menu screen.
1. Highlight PAN, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight TILT, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight GOBO, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight GOBO ROT, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight GOBO2, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight COLOR1, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight COLOR2, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight PRISM, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight FOCUS, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight IRIS, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight FROST, press <ENTER>.
2. Select 000–255, press <ENTER>.
1. Highlight DIMMER, press <ENTER>.
2. Select 000–255, press <ENTER>.
Reserved for future use.
Rogue™ R1 Spot User Manual Rev. 5
Operation
DMX Values
19CH Channel
Function
Value
Percent/Setting
1
Pan
000ó255 0–100%
2
3
4
5
6
7
Fine Pan
Tilt
Fine Tilt
Pan/Tilt Speed
Dimmer
Fine Dimmer
8
Shutter
9
Color Wheel
000ó255
000ó255
000ó255
000ó255
000ó255
000ó255
000ó003
004ó007
008ó076
077ó145
146ó215
216ó255
000ó006
007ó013
014ó020
021ó027
028ó034
035ó041
042ó048
049ó055
056ó063
064ó127
128ó191
192ó255
Rogue™ R1 Spot User Manual Rev. 5
0–100%
0–100%
0–100%
0–100%
0–100%
0–100%
Closed
Open
Slow to fast
Pulse effect from slow to fast
Random effect from slow to fast
Open
Open
Red
Orange
Green
Yellow
Blue
CTO 3200 K
Magenta
Purple
Split colors
Clockwise color scroll, slow to fast
Counter-clockwise color scroll, slow to fast
-17-
Operation
DMX Values (Cont.)
19CH Channel
(Cont.)
10
11
12
13
14
15
16
-18-
Function
Value
Percent/Setting
000ó007
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó063
064ó119
120ó127
128ó191
192ó255
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo shake 1–7, slow to fast
Open
Clockwise gobo scroll, slow to fast
Counter-clockwise gobo scroll, slow to fast
000ó063
064ó147
Gobo Wheel 1 Rotate
148ó231
232ó255
000ó006
007ó013
014ó020
021ó027
028ó034
035ó041
Gobo Wheel 2
042ó048
049ó055
056ó063
064ó120
121ó127
128ó191
192ó255
Focus
000ó255
000ó004
Prism
005ó255
000ó127
128ó189
Prism Rotate
190ó193
194ó255
000ó063
064ó127
Iris
128ó191
192ó255
Gobo index
Clockwise rotation, slow to fast
Counter-clockwise rotation, slow to fast
Boomerang effect, slow to fast
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo shake 1–8, slow to fast
Open
Clockwise gobo scroll, slow to fast
Counter-clockwise gobo scroll, slow to fast
0–100%
No function
Prism insert
Prism index
Counter-clockwise rotation, fast to slow
Stop
Clockwise rotation, slow to fast
Wide to narrow
Iris effect, slow to fast
Iris effect, in slow, out fast
Iris effect, out slow, in fast
Gobo Wheel 1
Rogue™ R1 Spot User Manual Rev. 5
Operation
DMX Values (Cont.)
19CH Channel
(Cont.)
17
Rogue™ R1 Spot User Manual Rev. 5
Function
Movement Macros
Value
000ó007
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó063
064ó071
072ó079
080ó087
088ó095
096ó103
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó175
176ó183
184ó191
192ó199
200ó207
208ó215
216ó223
224ó231
232ó239
240ó247
248ó255
Percent/Setting
No function
Effect 1
Effect 2
Effect 3
Effect 4
Effect 5
Effect 6
Effect 7
Effect 8
Effect 9
Effect 10
Effect 11
Effect 12
Effect 13
Effect 14
Effect 15
Effect 16
Effect 17
Effect 18
Effect 19
Effect 20
Effect 21
Effect 22
Effect 23
Effect 24
Effect 25
Effect 26
Effect 27
Effect 28
Effect 29
Effect 30
Effect 31
-19-
Operation
DMX Values (Cont.)
19CH Channel
Function
(Cont.)
Movement Macro
18
19
16CH Channel
-20-
Speed
Control
Function
Value
Percent/Setting
000ó255 0–100%
000ó007
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó095
096ó103
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó239
240ó247
248ó255
No function
Blackout during pan/tilt (3 sec hold)
Blackout while color wheel moving (3 sec hold)
Blackout while gobo wheels moving (3 sec hold)
Disable pan/tilt blackout (3 sec hold)
Disable color wheel blackout (3 sec hold)
Disable gobo wheel blackout (3 sec hold)
No function
Pan reset
Tilt reset
Color wheel reset
Gobo wheel reset
Gobo rotation reset
Prism reset
Focus reset
All reset
Iris reset
No function
Pan/Tilt movement ramp speed, increase on
Pan/Tilt movement ramp speed, increase off
Value
Percent/Setting
1
2
Pan
Fine Pan
000ó255 0–100%
000ó255 0–100%
3
4
5
6
Tilt
Fine Tilt
Pan/Tilt Speed
Dimmer
7
Shutter
000ó255
000ó255
000ó255
000ó255
000ó003
004ó007
008ó076
077ó145
146ó215
216ó255
0–100%
0–100%
0–100%
0–100%
Closed
Open
Slow to fast
Pulse effect from slow to fast
Random effect from slow to fast
Open
Rogue™ R1 Spot User Manual Rev. 5
Operation
DMX Values (Cont.)
16CH Channel
(Cont.)
8
9
10
Rogue™ R1 Spot User Manual Rev. 5
Function
Value
Percent/Setting
000ó006
007ó013
014ó020
021ó027
028ó034
035ó041
042ó048
049ó055
056ó063
064ó127
128ó191
192ó255
Open
Red
Orange
Green
Yellow
Blue
CTO 3200 K
Magenta
Purple
Split colors
Clockwise color scroll, slow to fast
Counter-clockwise color scroll, slow to fast
000ó007
008ó015
016ó023
024ó031
032ó039
040ó047
Gobo Wheel 1
048ó055
056ó063
064ó119
120ó127
128ó191
192ó255
000ó063
064ó147
Gobo Wheel 1 Rotate
148ó231
232ó255
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo shake 1–7, slow to fast
Open
Clockwise gobo scroll, slow to fast
Counter-clockwise gobo scroll, slow to fast
Gobo index
Clockwise rotation, slow to fast
Counter-clockwise rotation, slow to fast
Boomerang effect, slow to fast
Color Wheel
-21-
Operation
DMX Values (Cont.)
16CH Channel
(Cont.)
-22-
Function
11
Gobo Wheel 2
12
Focus
13
Prism
14
Prism Rotate
15
Iris
16
Control
Value
000ó006
007ó013
014ó020
021ó027
028ó034
035ó041
042ó048
049ó055
056ó063
064ó120
121ó127
128ó191
192ó255
000ó255
Percent/Setting
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo shake 1–8, slow to fast
Open
Clockwise gobo scroll, slow to fast
Counter-clockwise gobo scroll, slow to fast
0–100%
000ó004 No function
005ó255 Prism insert
000ó127
128ó189
190ó193
194ó255
000ó063
064ó127
128ó191
192ó255
000ó007
008ó015
016ó023
024ó031
032ó039
040ó047
048ó055
056ó095
096ó103
104ó111
112ó119
120ó127
128ó135
136ó143
144ó151
152ó159
160ó167
168ó239
240ó247
248ó255
Prism index
Counter-clockwise rotation, fast to slow
Stop
Clockwise rotation, slow to fast
Wide to narrow
Iris effect, slow to fast
Iris effect, in slow, out fast
Iris effect, out slow, in fast
No function
Blackout during pan/tilt (3 sec hold)
Blackout while color wheel moving (3 sec hold)
Blackout while gobo wheels moving (3 sec hold)
Disable pan/tilt blackout (3 sec hold)
Disable color wheel blackout (3 sec hold)
Disable gobo wheel blackout (3 sec hold)
No function
Pan reset
Tilt reset
Color wheel reset
Gobo wheel reset
Gobo rotation reset
Prism reset
Focus reset
All reset
Iris reset
No function
Pan/Tilt movement ramp speed, increase on
Pan/Tilt movement ramp speed, increase off
Rogue™ R1 Spot User Manual Rev. 5
Technical Information
5. TECHNICAL INFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Do not spin the cooling fans while blowing compressed air into them.
Rogue™ R1 Spot User Manual Rev. 5
-23-
Technical Information
6. TECHNICAL SPECIFICATIONS
Dimensions and
Weight
Power
Light Source
Photo Optic
Gobo Dimensions
Thermal
DMX
Ordering
-24-
Length
Width
Height
Weight
11.1 in (282 mm)
14.2 in (360 mm)
17.6 in (447 mm)
36 lb (16.3 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 VAC, 60 Hz
230 VAC, 50 Hz
Consumption
Current
Power linking current
(products)
Fuse
225 W
2.0 A
13.6 A (6 products)
220 W
1.0 A
13.6 A (13 products)
F 4 A, 250 V
F 4 A, 250 V
Power I/O
U.S./Canada
Worldwide
Power input connector
Power cord plug
Neutrik® powerCON® A
Edison (U.S.)
Neutrik® powerCON® A
Local plug
Type
Power
Lifespan
LED
140 W
50,000 hours
Parameter
Standard Optics
Illuminance @ 5 m
Beam angle
2,619 lux
16.5°
Gobo Wheel 1
Outside Diameter
Image
Diameter
Max.
Thickness
26.9 mm (Metal)
25.9 mm (Glass)
22.5 mm (Metal)
22.5 mm (Glass)
0.5 mm (Metal)
1.5 mm (Glass)
Max. External Temperature
Cooling System
113 °F (45 °C)
Fan-Cooled
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
16 or 19
Product Name
Item Code
UPC Number
Rogue™ R1 Spot
Rogue™ R1 Spot x2
08010828
08010878
781462211769
781462212261
Rogue™ R1 Spot User Manual Rev. 5
Technical Information
Returns
You must send the product prepaid, in the original box, and with the original packing and
accessories. CHAUVET® will not issue call tags.
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before
shipping the product. Be prepared to provide the model number, serial number, and a
brief description of the cause(s) for the return.
Clearly label the package with an RMA number. CHAUVET® will refuse any product
returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly
affixed label.
Once you have received the RMA number, include the following information on a piece of
paper inside the box:
· Your name
· Your address
· Your phone number
· The RMA number
· A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double-boxing is
recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace
returned product(s).
CONTACT
US
WORLD HEADQUARTERS - CHAUVET®
General Information
th
Address:5200 NW 108 Avenue
Sunrise, FL 33351
Voice: (954) 577-4455
Fax:
(954) 929-5560
Toll free: (800) 762-1084
Technical Support
Voice: (954) 577-4455 (Press 4)
Fax:
(954) 756-8015
Email: tech@chauvetlighting.com
World Wide Web
www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd.
General Information
Address:Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Fax:
+44 (0)1773 511110
Technical Support
Email: uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
MEXICO - CHAUVET® Mexico
General Information
Address:Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: +52 (728) 285-5000
Technical Support
Email: servicio@chauvet.com.mx
World Wide Web
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your dealer. Follow their instructions to
request support or to return a product. Visit our website for contact details.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising