Brady LabelMark 3.1 User manual

Brady LabelMark 3.1 User manual
Datacomtools.com
TM
The Web’s Best Source for Telecom Tools and Testers
Now Featuring Solutions
for Datacenters
FREE
SHIPPING ON
ORDERS OVER
$99
WISE COMPONENTS, INC.
A Division of Wise Components, Inc.
800.543.4333
Shipping Methods
- In stock products will ship the same day if ordered before 4pm EST Mon-Fri.
- Our standard shipping method is Federal Express but other methods are available.
- Free ground shipping on orders over $99*
- APO orders ship via US Mail.
Payment Methods**
Government/Corporate Purchase Orders
Orders that have been submitted for credit approval must be accompanied with
credit references. Orders that have been approved for terms will be Net 30
Days. Please allow 24 hours for credit approval.
Corporate Headquarters, Stamford CT
A Brief History
Wise Components, Inc. was founded in 1975, and quickly developed
a base of OEM manufacturers and electrical contractors in Metro New
York and Connecticut. In 1986, the IBM research center requested
Wise’s service in specifying the materials needed so that each
employee could have a monitor on their desk. At the time the term
LAN – Local Area Network – was still just a concept. Wise supplied all
the cable, connectors, and deployment components needed for them
to achieve their goal.
In the late 1980s, several of Wise’s OEM manufacturers moved their
plants overseas. Where other companies may have found it difficult to
service customers overseas, Wise rose to the challenge, and to this
day, provide our superior service internationally.
In the late 1990s, Wise launched www.datacomtools.com; a website
dedicated to supplying tools, test equipment, and data center
components to contractors, end-users throughout the US and abroad.
Wise Components, Inc employs over 30 Professionals ready to help
you deploy your network infrastructure in the most cost effective way.
PayPal
Web purchases can be easily paid thru PayPal.
Credit Cards:
Product can be ordered by Credit Card.
We accept Visa, Mastercard, Discover, and American Express.
Return Policy
- Products may be returned up to 30 days after date of purchase and Products
must be in their original packaging.
- A credit will be issued after Product has been received, inspected and found to
be in resalable condition.
- A 20% restock fee will be assessed to Product being returned for reasons other
than damaged, defective or shipment error. If the manufactures restock charge
is greater than 20% the manufacturers restock fee will be applied. Credit will
only be applied to the product not shipping or expediting charges.
- To return a Product call 1-800-543-4333 x199 to request a Return Material
Authorization Number (RMA #).
- All Returns must have the RMA# clearly marked on the outside of the box. All
unauthorized returns will be refused.
- Returns are to be sent pre-paid to:
Datacomtools.com 79 Harborview Avenue Stamford, CT 06902.
How to Order
Phone:
1.800.543.4333
Fax:
203.325.2198**
Mail:
79 Harborview Avenue
Stamford, CT 06902
Online:
www.datacomtools.com
Live Online Support
Call us at: 1.800.543.4333 or Visit us at: www.datacomtools.com
Estimated FedEx Ship Time to your State
WA
MT
NY Sales Office, Hicksville NY
VT
ND
OR
ME
MN
ID
WI
SD
MI
PA
IA
NE
NV
UT
IL
CO
CA
KS
OH
IN
MO
OK
NM
NJ
CT
RI
DE
WV
VA
MD
KY
NC
TN
AZ
NH
MA
NY
WY
AR
SC
MS
AL
GA
TX
LA
FL
HI
AK
1 Day
Superior Service for over 35 years
2
Datacomtools.com
TM
2 Days
3 Days
4 Days
5 Days
6 Days
7 Days
* In the contiguous states, Certain items may not apply
** Prices are subject to change
*** Fax order pending credit approval
Datacomtools is not responsible for typographic and printing errors.
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
BMP
TM
21
Meet the newest member of your crew
OFFRCYHOAUSRE**
10%
D
RA Y PU
NEXT B
CODE:
COUPON
d
Bra y
- One-handed operation with large display and backlight
- Terminal block and patch panel options
- Advanced serialization, barcoding, and symbols.
- Cuts and hold printed labels until you need them
- Rugged construction... withstands a 5ft. drop onto concrete.
LABEL PRINTER
BMP21 Label Printer & Accessories
Label Printer
Printer, Case, BMP21-Tool & AC Adapter
Printer, Case, & AC Adapter
Printer & Case
Printer & AC Adapter
Printer & BPM21 Tool
AC Adapter
Hard Side Carrying Case
Magnet only Accessory
Multifunction Accessory
BMP21
BMP21-KIT-110940
BMP21-KIT-110941
BMP21-KIT-110942
BMP21-KIT-110943
BMP21-KIT-114305
BMP21-AC
BMP21-HC
BMP21-MAGNET
BMP21-TOOL
$145.95
$217.77
$191.00
$164.43
$169.16
$159.71
$42.00
$36.75
$15.75
$31.50
Indoor/Outdoor Grade Vinyl Film
B-580 - Super-Tough Vinyl Tape - Perfect for voice, data, audio, video, HVAC
control, bins, safety and electrical applications
Note: As of February 2011, B-580 material will be replaced with B-595
material. When ordering after this date, Please replace 580 with 595 in the
part number.
Size
21’ x .375”
21’ x .500”
21’ x .750”
Select Color**
M21-375-580-XX**
M21-500-580-XX**
M21-750-580-XX**
** Colors Available
BK on WT
BK on YL
BK on OR
WT on RD
Price
$20.46
$20.46
$23.70
WT on BL
WT on GN
An affordable
label and wire
marker designed
for the tool box
Electrical Labeling
Datacom Labeling
General
Identification
PermaSleeve
Markers
Self-Laminating
Labels
Safety Labels
...and many more
Self-Laminating Vinyl
B-427 - Continuous black on white selflaminating wire marker
Size
14’ x .750”
14’ x 1.00”
14’ x 1.25”
14’ x 1.50”
Black on White
M21-750-427*
M21-1000-427*
M21-1250-427*
M21-1500-427*
Price
$27.46
$33.25
$33.86
$34.26
PermaSleeve Wire
Marker Sleeves
B-342 - Continuous cut-to-length heat
shrinkable sleeves
Size
7’ x .125”
7’ x .187”
7’ x .250”
7’ x .375”
Black on White
M21-125-C-342*
M21-187-C-342
M21-250-C-342
M21-375-C-342
Price
$41.72
$45.52
$52.07
$57.46
*BMP21 and IDPAL label cartridges can be used in either the BMP21 Label Printer or the
IDPAL Printer except for those denoted by an asterisk*
Nylon Cloth
Polyester
B-499 - For wire, cable, patch panels,
and faceplates
B-430 - Black on white for instruments,
racks and bins
Size
16’ x .375”
16’ x .500”
16’ x .750”
Black on White
M21-375-499
M21-500-499
M21-750-499
B-499 - For Terminal Blocks
Size
Terminal Block
16’ x .375” M21-375-499-TB
16’ x .500” M21-500-499-TB
Price
$22.11
$22.11
$25.00
Price
$22.11
$22.11
Size
21’ x .375”
21’ x .500”
21’ x .750”
Black on White
M21-375-423
M21-500-423
M21-750-423
Price
$19.39
$19.39
$21.54
B-430 - Black on clear for instruments, racks
and bins
Size
Black on Clear
Price
21’ x .375”
M21-375-430
$19.58
21’ x .500”
M21-500-430
$19.58
21’ x .750”
M21-750-430
$21.75
**Can not combine with other offers
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
3
LabelMark Software
Brady’s LabelMark™ Labeling Software offers features that make creating labels more efficient. This labeling software is
written specifically for markets where wire and cable marking is a constant and tedious job. LabelMark labeling software is
the easy solution for label design, editing, and printing. This software is a fast system for creating and printing professional,
accurate, & legible labels. With built-in templates, wizards, fixed text labels and free form design, LabelMark Label Software
simplifies label making in the electrical, industrial, aerospace, laboratory, and telecom industries. Save time and print
labels faster and more efficiently.
Quickly create, view, and print with easy editing features
- Edit text elements - simple text entry, formatting, and editing
- Fast label templates - easily edit often-used label templates
- Redesigned toolbars and menus - easy access to all program features
- Find and replace - quickly search and replace text in label files
- Label preview - lets you see labels before you print for more accuracy
- Add barcodes - several common bar code symbologies available
- Add date/time - easy insertion of date and/or time fields into the labels
- Pre-installed symbols library - features electrical, datacomm, and safety symbols
LM5PRFCD
LM5PROE
LM5STDCD
LM5STDE
LabelMark 5 CD-ROM Professional
LabelMark 5 Professional Software - E-Media
LabelMark 5 Standard Software - CD-ROM
LabelMark 5 Standard Software - CD-ROM
$379.00
$359.00
$219.00
$199.00
Vinyl Cloth Wire Marker Cards
- Brady exclusive Zip-Strip release card lets you easily remove just the markers you need.
- Large selection of wire marker cards allow you to choose the product that precisely meets your requirements.
- Wire Markers are .25 inches wide and 1.5 inches long
25 Cards Per Package
Legend
Markers/card
0
36
1
36
2
36
3
36
4
36
5
36
6
36
7
36
Catalog #
WM-0-PK
WM-1-PK
WM-2-PK
WM-3-PK
WM-4-PK
WM-5-PK
WM-6-PK
WM-7-PK
25 Cards Per Package
Legend
Markers/card
8
36
9
36
1-33
33
34-66
33
67-99
33
100-124
25
125-149
25
A-Z
26
Price
$43.20
$43.20
$43.20
$43.20
$43.20
$43.20
$43.20
$43.20
Catalog #
WM-8-PK
WM-9-PK
WM-1-33-PK
WM-34-66-PK
WM-67-99-PK
WM-100-124-PK
WM-125-149-PK
WM-A-Z-PK
Price
$43.20
$43.20
$43.20
$43.20
$43.20
$42.66
$43.20
$45.14
RHINO 101 Reuseable Label Dispenser
All Rhino labels are super strong and engineered for the long haul. Thanks to industrial-strength adhesives, they deliver the
lasting durability you demand. With Rhino 101, you can rest assured you’re using reliable Rhino labels in an easy-to-load
cartridges.
- Self-Laminating Vinyl Labels for Wire and Cable Marking
- Specially formulated to stick and last on wire and cable
- White write-on area accepts permanent marker
- Clear tail wraps and laminates handwritten text for protection
- Easy-peel, die cut labels
- Cutting Window
- Built-in Cutter
Quickly aligns label prior to
cutting
Fast and easy one-handed
cutting
Features:
- Includes Sharpie® Retractable Permanent Marker
- No cap to remove or lose
- Large Writing Window
- Easy to write and view label
- Belt Clip and Lanyard Holder
Keep tool accessible at all
times
- Thumb Driven Label Advance
Eliminates smearing
1738635 Includes:
- Rhino 101 Reusable Label Dispenser
- 0.75” x 1.5” Self-Laminating Vinyl Labels (140 Labels)
- Black Sharpie Retractable Permanent Marker
1738635
4
Datacomtools.com
TM
RHINO 101 Reuseable Label Dispenser with Self-Laminating Vinyl
$20.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
- Permanent, Quick, Crisp Labels
- Built-in Electrical and Voice/Data Symbols
- Autotext Sizing TLS2200 reads your label size and style,
selects the most suitable type size, and instantly registers
it for printing
- Variable font sizes from 1 (4 point) to 19 (72 point)
FF YHOAUSRE*
10%RAO
DY PURC
NEXT B
CODE:
COUPON
d
Bra y
TLS2200 Thermal Printer Kit
Battery pack
Battery charger
Black ribbon for Cat5 labels
Black ribbon
TLS2200
TLS2200-BP
TLS2200-BC
R4310
R6010
$795.00
$93.44
$44.47
$28.17
$29.02
General
Adhesive Wire & Cable Markers
- Industrial strength Vinyl Cloth (B498) an Nylon Cloth
(B499) designed to conform to curved surfaces
- Printer automatically calibrates label and prints
multiple lines of wire code legend,
Wire Gauge
Materials
Part #
Labels
Inch
A
Inch
B
Max Characters
2
7
10
2
7
10
Maximum Lines
Price
16 to 22
Vinyl Cloth
PTL-7-498
500
0.5
0.5
11
5
3
5
2
1
$48.24
10 to 16
Vinyl Cloth
PTL-10-498
750
0.25
0.75
5
2
1
3
1
1
$51.28
10 to 16
Vinyl Cloth
PTL-11-498
500
0.5
0.75
11
5
3
8
4
2
$44.76
10 to 12
Vinyl Cloth
PTL-16-498
500
0.375
1
8
3
2
10
5
3
$53.78
10 to 12
Nylon Cloth
PTL-16-499
500
0.375
1
8
3
2
10
5
3
$54.96
10 to 12
Vinyl Cloth
PTL-17-498
500
0.5
1
11
5
3
3
1
1
$56.52
10 to 12
Vinyl Cloth
PTL-18-498
250
0.75
1
18
7
5
10
5
3
$37.03
10 to 12
Nylon Cloth
PTL-18-499
250
0.75
1
18
7
5
10
5
3
$37.82
10 to 12
Vinyl Cloth
PTL-19-498
250
1
1
24
10
7
10
5
3
$40.18
10 to 12
Nylon Cloth
PTL-19-499
250
1
1
24
10
7
10
5
3
$41.09
4 to 10
Vinyl Cloth
PTL-28-498
750
0.25
1.5
5
2
1
16
8
5
$52.21
4 to 10
Nylon Cloth
PTL-28-499
750
0.5
0.5
5
2
1
16
8
5
$53.52
4 to 10
Vinyl Cloth
PTL-29-498
500
0.5
0.5
11
5
3
16
8
5
$49.98
4 to 10
Nylon Cloth
PTL-29-499
500
0.5
1.5
11
5
3
16
8
5
$51.02
4 to 10
Vinyl Cloth
PTL-30-498
250
0.75
1.5
18
7
5
16
8
5
$43.97
4 to 10
Nylon Cloth
PTL-30-499
250
0.75
1.5
18
7
5
16
8
5
$45.16
4 to 10
Vinyl Cloth
PTL-31-498
250
1
1.5
24
10
7
16
8
5
$51.02
4 to 10
Nylon Cloth
PTL-31-499
250
1
1.5
24
10
7
16
8
5
$52.34
Lg. Cable
Vinyl Cloth
PTL-21-498
100
1
2.5
24
10
7
23
14
9
$33.66
Lg. Cable
Vinyl Cloth
PTL-23-498
100
1
4
24
10
7
23
22
15
$40.24
Lg. Cable
Vinyl Cloth
PTL-34-498
50
1.5
6
37
15
10
64
32
21
$44.94
Self-Laminating
Adhesive Wire and Cable Markers
- Extra-durable B427 material features a clear trailer that wraps over print area to protect
the printed text.
- Exceptional adhesion to Cat.5 cable and electrical wires and cable
Application
Material
Part #
Label
Inch
A
Inch
B
Inch
C
2
Max. Characters
7
Max. Lines
Price
10
2
7
10
2 pair Fiber, Single/Multimode
Vinyl Self-Lam.
PTL-19-427
250
1
1
0.375
24
10
7
3
1
1
25 pair Copper, 4-12 pair Fiber
Vinyl Self-Lam.
PTL-21-427
100
1
2.5
0.75
24
10
7
8
4
2
$27.36
Cat-5, 4 pair UTP Copper
Vinyl Self-Lam.
PTL-64-427
100
1
3.375
1.125
24
10
7
12
12
8
$16.75
50 pair Copper, 24 pair Fiber
Vinyl Self-Lam.
PTL-23-427
100
1
4
1
24
10
7
10
5
3
$32.58
Cat-5, 4 pair UTP Copper
Vinyl Self-Lam.
PTL-29-427
500
0.5
1.5
0.5
11
5
3
5
2
1
$48.67
Cat-5, 4 pair UTP Copper
Vinyl Self-Lam.
PTL-30-427
250
0.75
1.5
0.5
18
7
5
5
2
1
$36.25
Cat-5, 4 pair UTP Copper
Vinyl Self-Lam.
PTL-31-427
250
1
1.5
0.5
24
10
7
5
2
1
$45.80
Cat-5, 4 pair UTP Copper
Vinyl Self-Lam.
PTL-32-427
250
1.5
1.5
0.5
37
15
10
5
2
1
$47.36
50 pair Copper, 24 pair Fiber
Vinyl Self-Lam.
PTL-33-427
100
1.5
4
1
37
15
10
10
5
3
$44.09
100 pair Copper, 36 pair Fiber
Vinyl Self-Lam.
PTL-34-427
50
1.5
6
1.5
37
15
10
16
8
5
$36.51
$35.73
*Can not combine with other offers
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
5
FF YHOAUSRE*
10%RAO
DY PURC
NEXT B
CODE:
COUPON
d
Bra y
Handheld Labeler
The versatile, feature-rich Brady IDXPERT handheld is now even more powerful with the addition
of PC-Connect printing, Voice/Data temples for punch block and faceplates, 10 additional font
sizes, and more!
Starter Kits
Xpert-Kit-ABC-VD - Voice & Datacom Kit:
1 Cartridge each of:
- XSL-21-427 - Self Lam markers
- X-30-422 - Port Labels & Faceplate Labels
- XC-475-412 - Non-adhesive strips
- XC-1000-580-YL-BK - 1” yellow vinyl
More Options:
- More types of labels: Self-lams, sleeves, and 90+ label styles including continuous tape.
- More width: Materials up to 1.5”, prints characters up to 1.25”.
More Brawn:
- 300dpi thermal transfer printing stays crisp and bright.
- Tough, rugged, drop tested construction.
Xpert-Kit-ABC-EL - Electrical Starter Kit:
1 Cartridge each of:
- X-18-498 - Standard wire ID wraps
- XPS-187-1 - Heatshrink wire markers
- XSL-103-427 - Self-lam Wire ID labels
- XC-1500-580-OR-BK - 1.5” orange vinyl
More Brains:
- Quick loading cartridge makes switching jobs really fast.
- “Smart Cartridge” saves time: auto senses label type & size.
- Intuitive user interface: accesses complex functions in a few steps.
- Truly handy: ergonomic design fit right in your hand!
Xpert-Kit-ABC-MRO - Facility/MRO Kit:
1 Cartridge each of:
- XC-1500-580-YL-BK - 1.5” yellow vinyl
- XC-1000-580-RD-WT - 1” red vinyl
- X-7-499 - White die cut labels
- XC-1000-580-GN-WT - green vinyl
- Slide-in Desi-Strip inserts for face plates - automatically defaults to most common 1.9” length or
user can specific their specific length needed depending on the equipment being labeled.
- Print from your PC - with optional Brady LabelMark 3.1.1 software, users can create labels on
their PC and print directly to the IDXpert. Users can also import data from other spreadsheets to
make printing lists of similar labels even easier.
All Starter Kits Include:
IDXPERT printer, Hardcase, PC cable, AC power
supply, 1.5” x 30’ continuous tape and the
items listed with the kit.
XPERT-ABC
XPERT-KEY
XPERT-ABC-KIT-LM
XPERT-KEY-KIT-LM
XPERT-ABC-KIT-MRO
XPERT-ABC-KIT-EL
XPERT-ABC-KIT-VD
LM5STDCD
XPERT-AC
PCK-4
IDXPERT Handheld Labeler (ABC Layout)
IDXPERT Handheld labeler (keyboard layout)
Handheld labeler w/LabelMark software
Handheld labeler w/LabelMark software
Handheld labeler MRO starter kit
Handheld labeler electrical starter kit
Handheld labeler voice/data starter kit
LabelMark labeling software
AC adapter
Cleaning kit
$399.95
$399.95
$641.00
$641.00
$595.00
$590.00
$567.00
$219.00
$42.00
$26.25
XPERT-ABC
XPERT-KEY
IDXPERT Printer ships with:
- Hard Case
- 1.5” x 30’ Cont. Tape
- PC Cable (upgrade only)
- Product CD
For more info on the IDXPERT go to: www.datacomtools.com/Xpert
*Can not combine with other offers
6
Datacomtools.com
TM
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
IDXPERT Labels
FF YHOAUSRE*
10%RAO
DY PURC
For more info on the IDXPERT Labels go to: www.datacomtools.com/Xpert_Labels
Peramsleeve - Wire Marking Sleeves
Cable Markers
NEXT B
CODE:
COUPON
d
Bra y
These heat-shrink sleeves are durable,
permanence and aesthetic appearance. The
labelers fast shrink rate saves time & cost during
installation.
Ideal for marking data cabling, this cable
marker’s protected printing offers superior
abrasion resistance and resistance to dirt,
solvents, and water.
Color:
Black on White
Black on Yellow
Sized to fit
2pair fiber/coaxial, single/multimode
CAT-5, 4pair UTP copper
CAT-5, 4pair UTP copper, fiber coaxial
CAT-5, 4pair UTP copper
CAT-5, 4pair UTP copper
CAT-5, 4pair UTP copper
CAT-5, 4pair UTP copper, fiber, coaxial
CAT-5, 4pair UTP copper, fiber coaxial
CAT-5, 4pair UTP copper, fiber coaxial
25pair copper, 4-12pair fiber coaxial
25pair copper, 4-12pair fiber coaxial
25pair copper, 4-12pair fiber coaxial
50pair copper, 24pair fiber backbone
50pair copper, 24pair fiber backbone
50pair copper, 24pair fiber backbone
100pair copper, 36pair fiber backbone
Part #
XSL-19-427
XSL-102-427
XSL-103-427
XSL-115-427
XSL-29-427
XSL-30-427
XSL-31-427
XSL-31-427-YL-BK
XSL-32-427
XSL-21-427
XSL-21-427-YL-BK
XSL-116-427
XSL-23-427
XSL-23-427-YL-BK
XSL-33-427
XSL-34-427
Labels
250
250
250
250
450
250
250
250
227
100
100
100
85
100
85
50
A (in)
1
.5
1
1.5
.5
.75
1
1
1.5
1
1
1.5
1
1
1.5
1.5
B (in)
1
1.25
1.25
1.25
1.5
1.5
1.5
1.5
1.5
2.5
2.5
2.5
4
4
4
6
C (in)
.375
.375
.5
.5
.5
.5
.5
.5
.5
.75
.75
.75
1
1
1
1.5
Price
45.07
32.18
51.54
46.37
57.98
43.80
54.12
59.28
60.55
36.05
39.92
36.05
46.37
50.23
57.98
46.37
ID’s for Racks, Data Centers
Wire Gauge
1.015” Marker Length
22-16 gauge 0.046 - 0.110 dia
18-12 gauge 0.062 - 0.150 dia
16-10 gauge 0.094 - 0.320 dia
12-6 gauge 0.125 - 0.320 dia
Continuous (cut to length)
22-16 gauge 0.046 - 0.110 dia
18-12 gauge 0.062 - 0.150 dia
16-10 gauge 0.094 - 0.215 dia
12-6 gauge 0.125 - 0.325 dia
Part #
Labels
A (in)
B (in)
Color
Price
XPS-125-1
XPS-187-1
XPS-250-1
XPS-375-1
100
100
100
100
1.015
1.015
1.015
1.015
0.235
0.335
0.439
0.645
BK on WT
BK on WT
BK on WT
BK on WT
51.28
56.29
67.57
97.62
XPS-125-CONT
XPS-187-CONT
XPS-250-CONT
XPS-375-CONT
1 roll
1 roll
1 roll
1 roll
8ft
8ft
8ft
8ft
0.235
0.335
0.439
0.645
BK on __*
BK on __*
BK on __*
BK on WT
44.50
48.87
53.79
78.84
*Available in both BK on WT & BK on YL
CONT - BK on WT Label
CONT-YL-BK - BK on YL Label
Wire & Cable Markers - Adhesive Wrap
Variety of sizes and permanent materials for
making racks, bay, frames, slots, and other
voice/data equipment.
Materials:
Ultra Polyester for powder/texture surfaces
Glossy polyester for powder/texture surfaces
Material
Ultra polyester
Ultra polyester
Ultra polyester
Glossy polyester
Glossy polyester
Glossy polyester
Glossy polyester
Glossy polyester
Part #
X-17-483
X-20-483
X-61-483
X-17-422
X-19-422
X-29-422
X-30-422
XC-1000-422
Labels
500
100
100
500
250
500
250
1 Roll
A (in)
1
2
2
1
1
1.5
1.5
30ft
B (in)
0.5
1
0.5
0.5
1
0.5
0.75
1
Color
BK on WT
BK on WT
BK on WT
BK on WT
BK on WT
BK on WT
BK on WT
BK on WT
Price
56.84
36.05
28.33
53.34
45.07
59.15
55.40
64.43
Durable vinyl cloth wrap around wire and
cable markers. Firm adhesive can be removed
cleanly and reapplied if necessary. Printer
automatically “multiple repeats” your text for
360° visibility.
A
B
Wire Gauge
22-16 gauge - .110” dia
16-10 gauge - .160” dia
12-10 gauge - .210” dia
12-10 gauge - .210” dia
10-4 gauge - .270” dia
TEXT 1
TEXT 1
TEXT 1
TEXT 1
Part #
X-7-498
X-11-498
X-19-498
X-18-498
X-103-498
Labels
300
275
200
225
200
Roll Continuous
Labels
350
350
500
500
500
100
1 Roll
A (in)
.75
.9
1
1.13
1.5
2
30ft
B (in)
Color
.5
BK on WT
.5
BK on WT
.5
BK on SV
.5
BK on SV
.5
BK on SV
1
BK on SV
1
BK on WT
Price
33.22
34.40
62.55
55.05
71.32
40.02
64.43
Patch Panel, Outlet and Faceplate Markers
A
B
TEXT 1
TEXT 2
TEXT 3
XC-500-595
BK-WT BK-OR BK-YL
XC-1000-595 BK-WT BK-OR BK-YL
XC-1500-595 BK-WT BK-OR BK-YL
Application
Label each port
Label Multiple Ports on Cont. Tape
Label Multiple Ports on Cont. Tape
Label patch panels with continuous supplies
that set automatically to user-defined fixed
spacing intervals. Die cut parts available for
marking ports and wall faceplates.
Labels
350
1 Roll
1 Roll
A (in) B (in)
Color
0.5
0.5 BK on WT
30ft 0.375 BK on WT
30ft
0.5 BK on WT
WT-RD
WT-RD
WT-RD
XC-500-580 - 30ft x 0.5”
XC-1000-580 - 30ft x 1”
XC-1500-580 - 30ft x 1.5”
WT-GN
WT-GN
WT-GN
A
B
TEXT 1
TEXT 2 100 101 102
TEXT 3
Part #
X-7-422
XC-375-422
XC-500-422
Price
42.10
42.18
37.14
43.37
37.96
WT-BL
WT-BL
WT-BL
RD-WT $45.07
RD-WT $56.70
RD-WT $67.02
CL-BK
CL-BK
CL-BK
$34.56
$48.44
$57.25
Terminal Block Markers
A
B
Color
BK on WT
BK on WT
BK on WT
BK on WT
BK on WT
This indoor/5-yr outdoor vinyl is very pliable
and conforms well to smooth or rough surfaces
such as pipes, wall, door, panels, shelving, and
equipment.
Various sizes and label types for marking relays,
solenoids, switches, drive motors, and other
components.
Part #
X-11-499
X-84-499
X-17-428-SV-BK
X-24-428-SVBB-BK
X-29-428-SV-BK
X-20-428-SV-BK
XC-1000-422
B (in)
.5
.75
1
1
1.25
Indoor/Outdoor Facility and Safety Labels
Automation & Electrical Components Markers
Material
General purpose nylon cloth
General purpose nylon cloth
Metallized polyester
Metallized polyester (black border)
Metallized polyester
Metallized polyester
Gloss polyester
A (in)
.5
.5
1
.75
1
Price
39.92
55.40
56.70
Width to Strip
0.240” wide
0.318” wide
0.375” wide
TEXT 1
TEXT 2
TEXT 3
•
•
•
100
101
102
•
•
•
Part #
XC-240-498
XC-318-498
XC-375-498
Narrow markers automatically set to spacing
between legends and rotate to orientation for
alignment on terminal blocks.
Labels
1 Roll
1 Roll
1 Roll
A (in)
.24
.318
.375
B (in)
Color
.375 BK on WT
.475 BK on WT
.625 BK on WT
Price
52.31
53.59
55.40
*Can not combine with other offers
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
7
NEW!!
BMP
TM
71
LABEL PRINTER
Thousands of Applications.
Hundreds of Labels.
One Label Printer
OFFRCYHOAUSRE**
10%
D
RA Y PU
NEXT B
CODE:
COUPON
d
Bra y
The Best features and functionalities of brady’s portable label printers are
now combined into one easy-to-use, top-of-the-line portable thermal transfer
printer - Brady’s NEW BMP­™71 printer. Whether you need ¼ Self-Laminating
wire marker labels or 2” wide vinyl pipe marker labels, you only need ONE
label maker - The BMP™71 printer can do it all!
With the BMP™71, your labeling options
are endless!
The BMP™71 Label Printer can also print
on TLS2200® Consumables and Handimark® Consumables using the included
Media Adapter
Features Include:
- 100’s of Symbols
- Reverse Print
- Multiple Font Size
- Subscripts
- Frame
- Mirror Print
- Color Screen
- Auto Font Size
- Vertical
- Expand/Condense
- Time/Date Stamps
- Underline/Italics/Bold
- Barcodes
- Serialization
Label printer ships with Hardcase, Charger/AC Adapter, 1 Roll
of M71-31-423 White Die Cut Labels, 1 M71-R6000 Black
Ribbon Cartridge, M71-ADAPT Tool Adapter, USB Cable,
Quickstart Guide, a CD including the printer driver, Users
Guide and Tutorial.
BMP71
BMP71-LM
BMP71-MW
BMP71-QC
BMP71-SC
BMP71-SC-QC
M71-AC-BC
M71-ADAPT
M71-BATT
M71-CABLE
M71-CLEAN
M71-HC
M71-QC
M71-SC
BMP™71 Label Printer
BMP™71 Label Printer with LabelMark Software
BMP™71 Label Printer with Markware Lean Software
BMP™71 Label Printer with Quick Charger
BMP™71 Label Printer with Soft Case
BMP™71-Label Printer with Soft Case and Quick Charger
BMP™71 AC/Battery Adapter
TLS2200®/Handimark® Media Adapter
BMP™71 Battery Pack
BMP™71 USB Cable
BMP™71 Cleaning Kit
BMP™71 Hardcase
BMP™71 Quick Charger
BMP™71 Softcase
$895.00
$984.60
$1344.60
$955.00
$920.00
$980.00
$59.00
$19.50
$85.00
$16.95
$15.00
$75.00
$115.00
$45.00
The one way
to faster,
easier label
printing
Electrical Labeling
Voice/Data
Comm Labeling
Safety Labels
PermaSleeve™
Markers
Self-Laminating
Labels
General ID Labels
..and many more
Brady 360® Replacement Printer Plan
The Brady 360™ Printer Replacement Plan Supplements the Limited Warranty already provided to you with the purchase of your brady printer. With this plan,
Brady Worldwide Inc., in its reasonable discretion, will send a replacement printer in the event that your covered printer requires service during the term of its
Limited Warranty. Brady will replace your defective printer with a new printer that has the same or similar functionality and is of the same or greater value.
Limit two new replacement printers per covered printer in each warranty period. The plan must be purchased at the time of printer purchase to be valid.
*Limit of two printers in the first 12 months of initial purchase.
**Can not combine with other offers
8
Datacomtools.com
TM
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
BMP™71
For more info on the BMP™71 Labels go to: www.datacomtools.com/BMP71-Labels
Permasleeve Wire Marking Sleeves - Heat Shrinkable
Voice/Data Cabling Labels & Tags
Labels for the Brady BMP71 thermal
transfer printer
Heat-Shrinkable White Polyolefin (B-342)
Part Number
1.015” Marker Width
M71-94-1-342
M71-125-1-342
M71-187-1-342
M71-250-1-342
M71-375-1-342
M71-500-1-342
1.765” Marker Width
M71-94-175-342
M71-125-175-342
M71-187-175-342
M71-250-175-342
M71-375-175-342
Qty
Wire Gauge
Dimensions
A
B
100
100
100
100
100
100
28-18
22-16
18-12
16-10
12-6
8-1
1.015”
1.015”
1.015”
1.015”
1.015”
1.015”
100
100
100
100
100
28-18
22-16
18-12
16-10
12-6
1.765”
1.765”
1.765”
1.765”
1.765”
Character
Lines
Price
0.182”
0.235”
0.335”
0.439”
0.645”
0.851”
22
22
22
22
22
22
1
1
2
3
5
7
46.58
49.38
54.99
66.61
98.11
113.43
0.182”
0.235”
0.335”
0.439”
0.645”
41
41
41
41
41
1
1
3
3
5
63.26
66.33
73.66
89.69
131.99
Workstation Labels
Red
Green
Labels for the Brady BMP71 printer
Polypropylene (B-412), Clear Polyester (B-430), Permanent Glossy Polyester (B-422), Vinyl (B-427)
Dimensions
Part Number
Applications
Material
Qty
A
B
Price
M71-16-430
1-4 outlet faceplates
Clear Polyester 500 1.000” 0.375” 46.65
M71-17-430
1-4 outlet faceplates
Clear Polyester 500 1.000” 0.500” 46.65
M71-40-412 Faceplates with DESI-STRIP Polypropylene
750 1.938” 0.375” 61.11
BM71-40-412 Faceplates with DESI-STRIP Polypropylene 5000 1.938” 0.375” 284.59
M71-45-422
1-2 outlet faceplates
Glossy Polyester 500 1.500” 0.375” 52.73
M71-45-430
1-2 outlet faceplates
Clear Polyester 500 1.500” 0.375” 48.75
M71-68-430
Siemon faceplates
Clear Polyester 750 0.240” 0.150” 32.64
M71-71-430
Siemon faceplates
Clear Polyester 750 0.350” 0.200” 32.64
BMP™71 Ribbons
Material
422
423
424
426
428
457
459
473
477
478
483
486
488
489
499
Polyester
Polyester
Paper
Polyimide
Polyester
Polyimide
Polyester
Polyester
Polyimide
Polyimide
Polyester
Polyester
Polyester
Polyester
Nylon Cloth
R4300
(Black)
M71 Series Ribbons
R6000 R6200 R4400-WT
(Black) (Black)
(White)
►
►
►
R6900
(Colors)
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
►
$120.04
$67.92
► Recommended
► Acceptable
►
►
►
►
►
►
►
►
►
►
►
►
►
$28.17
►
►
►
►
$96.01
►
$75.35
With the BMP™71, your labeling options are endless!
The BMP™71 printer can print on
over 400 label parts - so whatever
label size or color you need, we’ve
got you covered. Add all of the
materials from the TLS 2200®
Thermal Transfer Printer and the
HandiMark® Portable Label Maker,
and your label options are endless!
FF YHOAUSRE*
10%RAO
DY PURC
NEXT B
CODE:
COUPON
d
Bra y
Voice and Data Cabling Labels and Tags for the Brady
BMP71 printer
Polyethylene (B-109), Self-Laminating Vinyl (B-427), Low
Smoke Self-Laminating Tedlar (B-642)
Part Number
M71-12-109
M71-19-427-YL
BM71-19-427
M71-21-427-YL
BM71-21-427
BM71-23-427
BM71-29-427
M71-30-427-BL
M71-30-427-PL
M71-30-427-RD
BM71-30-427
M71-31-427-GR
M71-31-427-RD
M71-31-427-YL
BM71-31-427
M71-32-427-YL
BM71-32-427
BM71-34-427
M71-36-109
M71-66-427
M71-88-427
M71-103-427
M71-104-427
M71-10-427
BM71-107-427
M71-109-427
Description
Cable Tag
2 pair Fiber, Single/Multimode
2 pair Fiber, Single/Multimode
25 pair Copper, 4-12 pair Fiber
25 pair Copper, 4-12 pair Fiber
50 pair Copper, 24 pair Fiber
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
50 pair Copper, 24 pair Fiber
100 pair Copper, 25 pair Fiber
Cable Tag
50 pair Copper, 24 pair Fiber
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
2 pair Fiber, Single/Multimode
CAT-5, 4 pair UTP Copper
CAT-5, 4 pair UTP Copper
50 pair Copper, 24 pair Fiber
Material
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Self Laminating Vinyl
Self-Laminating Vinyl
Self-Laminating Vinyl
Qty
100
250
2500
100
1000
1000
5000
250
250
250
2500
250
250
250
2500
250
1000
500
250
100
250
250
250
100
1000
100
Dimensions
A
B
C
0.75”
3”
1”
1”
0.375”
1”
1”
0.375”
1”
2.5” 0.75”
1”
2.5” 0.75”
1”
4”
1”
0.5”
1.5”
0.5”
0.75” 1.5”
0.5”
0.75” 1.5”
0.5”
0.75” 1.5”
0.5”
0.75” 1.5”
0.5”
1”
1.5”
0.5”
1”
1.5”
0.5”
1”
1.5”
0.5”
1”
1.5”
0.5”
1.5”
1.5”
0.5”
1.5”
4”
1”
1.5”
6”
1.5”
1.75” 1.125”
1.94” 3.15”
1”
1.75” 1.5”
0.5”
1”
1.25” 0.5”
1.5”
1”
0.375”
2”
1.5”
0.5”
2”
1.5”
0.5”
1.5”
4”
1.5”
Wire and Cable Marking
Labels for the Brady BMP71 printer
B-427 Self Laminating White/
Transparent Vinyl, Repositionable Vinyl
Cloth (B-498), Nylon Cloth (B-499),
Self-Laminating Tedlar (B-642)
Black
Red
Part Number
Material
Qty
A
B
C
Character Lines
4 to 10 Gauge Wire (AWG) Based on THHN Wire - Maximum Wire Diameter - 0.260in (6.64mm)
M71-28-427
Self-laminating Vinyl
750
0.25” 1.5”
0.5”
5
5
M71-28-499
Nylon Cloth
750
0.25” 1.5”
5
16
M71-29-427
Self-laminating Vinyl
500
0.5”
1.5”
0.5”
11
5
M71-29-499
Nylon Cloth
500
0.5”
1.5”
11
16
M71-30-427
Self-laminating Vinyl
250
0.75” 1.5”
0.5”
18
5
M71-30-427-BL
Self-Laminating Vinyl
250
0.75” 1.5”
0.5”
18
5
M71-30-427-PL
Self-Laminating Vinyl
250
0.75” 1.5”
0.5”
18
5
M71-30-427-RD
Self-Laminating Vinyl
250
0.75” 1.5”
0.5”
18
5
BM71-30-427
Self-laminating Vinyl
2500
0.75” 1.5”
0.5”
18
5
M71-30-498
Repositional Vinyl Cloth
250
0.75” 1.5”
18
16
M71-30-499
Nylon Cloth
250
0.75” 1.5”
18
16
M71-31-427
Self-laminating Vinyl
250
1”
1.5”
0.5”
24
5
M71-31-427-GR
Self-Laminating Vinyl
250
1”
1.5”
0.5”
24
5
M71-31-427-RD
Self-Laminating Vinyl
250
1”
1.5”
0.5”
24
5
M71-31-427-YL
Self-Laminating Vinyl
250
1”
1.5”
0.5”
24
5
BM71-31-427
Self-laminating Vinyl
2500
1”
1.5”
0.5”
24
5
M71-31-498
Repositional Vinyl Cloth
250
1”
1.5”
24
16
M71-31-499
Nylon Cloth
250
1”
1.5”
24
16
M71-32-427
Self-laminating Vinyl
250
1.5”
1.5”
0.5”
37
5
M71-32-427-YL
Self-Laminating Vinyl
250
1.5”
1.5”
0.5”
37
5
BM71-32-427
Self-laminating Vinyl
1000
1.5”
1.5”
0.5”
37
5
M71-88-427
Self-Laminating Vinyl
250
1.75” 1.5”
0.5”
40
5
10 to 12 Gauge Wire (AWG) Based on THHN Wire - Maximum Wire Diameter - 0.210in (5.30 mm)
M71-16-498
Repositional Vinyl Cloth
500
0.375”
1”
8
10
M71-16-499
Nylon Cloth
500
0.375”
1”
8
10
M71-17-427
Self-Laminating Vinyl
500
0.5”
1”
0.375”
11
3
BM71-17-427
Self-Laminating Vinyl
5000
0.5”
1”
0.375”
11
3
M71-18-427
Self-Laminating Vinyl
250
0.75”
1”
0.375”
18
3
BM71-18-427
Self-Laminating Vinyl
2500
0.75”
1”
0.375”
18
3
M71-18-498
Repositional Vinyl Cloth
250
0.75”
1”
18
10
BM71-18-498
Repositional Vinyl Cloth
2500
0.75”
1”
18
10
M71-18-499
Nylon Cloth
250
0.75”
1”
18
10
M71-19-427
Self-laminating Vinyl
250
1”
1”
0.375”
24
3
M71-19-427-YL
Self-Laminating Vinyl
250
1”
1”
0.375”
24
3
BM71-19-427
Self-Laminating Vinyl
2500
1”
1”
0.375”
24
3
M71-19-498
Repositional Vinyl Cloth
250
1”
1”
24
10
BM71-19-498
Repositional Vinyl Cloth
2500
1”
1”
24
10
M71-19-499
Nylon Cloth
250
1”
1”
24
10
10 to 16 Gauge Wire (AWG) Based on THHN Wire - Maximum Wire Diameter - 0.160in (4.10 mm)
M71-10-427
Self-Laminating Vinyl
750
0.25” 0.75” 0.375”
5
3
M71-11-427
Self-Laminating Vinyl
500
0.5” 0.75” 0.375”
11
3
BM71-11-427
Self-Laminating Vinyl
5000
0.5” 0.75” 0.375”
11
3
M71-11-498
Repositional Vinyl Cloth
500
0.5” 0.75”
11
8
BM71-11-498
Repositional Vinyl Cloth
5000
0.5” 0.75”
11
8
M71-11-499
Nylon Cloth
500
0.5” 0.75”
11
8
BM71-11-499
Nylon Cloth
5000
0.5” 0.75”
11
8
M71-96-427
Self-Laminating Vinyl
250
1”
0.75” 0.375”
24
3
16 to 22 Gauge Wire (AWG) Based on THHN Wire - Maximum Wire Diameter - 0.110in (2.80 mm)
M71-7-498
Repositional Vinyl Cloth
500
0.5”
0.5”
11
5
M71-7-499
Nylon Cloth
500
0.5”
0.5”
11
5
*Can not combine with other offers
Major Credit Cards Accepted
Price
36.77
39.38
249.67
34.28
191.55
228.72
340.19
45.28
45.28
45.28
253.45
58.37
58.37
58.37
321.24
58.75
132.15
255.41
49.20
44.09
61.89
42.14
45.80
34.94
384.69
44.09
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
Price
44.49
53.52
48.67
51.02
32.47
45.28
45.25
45.28
253.45
43.97
45.16
45.80
58.37
58.37
58.37
321.24
51.02
52.34
47.36
58.75
132.15
61.89
53.78
54.96
39.78
278.19
31.83
227.81
37.03
251.62
37.82
35.73
39.38
249.67
40.18
272.93
41.09
34.94
37.15
260.12
44.76
313.52
45.80
321.24
25.37
49.20
50.25
9
The BMP®51 Label Maker is a printer that helps you get the job done – and gets
it done faster, easier, and with confidence. This label maker has a large display
and easy-to-use interface, so you can create, edit and print your labels in seconds
without being connected to a PC. Even changing materials is a snap; just drop in
the cartridge, and the printer will calibrate the rest!
BMP53
With 20 label materials with widths up to 1.5”, the BMP51 Label Maker offers
impressive versatility for a portable printer.
BMP51
The BMP53 Label Maker is a compact, versatile portable printer with built-in
Bluetooth® technology for wireless printing. When used in conjunction with the
free Brady Mobile App, you can design and print labels with this printer using your
Android phone!
This label maker has a 300 dpi print head and can print professional, durable
labels up to 1.5” wide. It prints on continuous and die-cut materials at a speed of
1 inch per second. With a built-in cutter, easy top-loading cartridges, and 3
different options for battery power, the BMP53 Label Maker is a powerful printer
for on-the-job label making. Or, you can easily connect the BMP53 Label Maker to
a PC for advanced label design with LabelMark™ Label Design Software.
Hassle-Free Printer Cartridges
- Ribbon and label materials in ONE cartridge!
- Top-loading cartridges snaps into place (you can’t load it wrong!)
- “No Jam” technology and locking mechanism that prevents labels
from retracting into cartridge.
Get the job done FASTER.
- Change supplies in seconds with hassle-free
drop-in cartridges.
- Automatic label formatting. no printer calibration!
- QWERTY style keypad for faster, accurate typing.
- Can work independent from a computer or with
the Brady Mobile App on an Android™ device.
Get the job done EASIER.
- Battery options for portability (AA batteries,
rechargeable Li-Ion battery or AC power).
- Labels up to 1.5” wide.
- Continuous & die-cut label materials.
- Import, store, and print label files from Excel®.
Get the job done WITH CONFIDENCE.
- Brady labels will not fade, smear or fall off – so you
only need to label something once.
- Rugged printer design survives a 4’ drop on concrete,
harsh environments and extreme temperatures.
- Create, edit, print and save labels using Brady’s
FREE Android™ App or LabelMark™ software.
Applications of the BMP®51 Label Printer
The BMP®51 Label Maker prints on both continuous and die-cut label materials. With over 190 different label and tag parts to choose from, you can make sure
you always have the right material for the job.
Datacom & A/V:
- General ID
- Flags
- Patch Panel
- Wire Markers
- 110 Block
- 66 Block
- BIX Block
75447314707
75447314703
75447314705
75447314708
75447314704
75447314706
Accessories
M50-MAGNET
BMP-UBP
BMP-UBP-AC
NET-WIFI
NET-LAN
NET-BT-WIFI-LAN
M50-HC
M50-SC
M50-AC
M50-CABLE
M50-BATT-TRAY
LM5STDCD
10
Electrical Applications:
- Cable Flags
- Wire Markers
- Terminal Block
- Wire Markers
- Flag Labels
- General ID
Facility & Safety Applications:
- Barcode Labels
- Lean and 5S Labels
- Shelf and Bin Labeling
- Work-in-Process Labels
- Facility and Safety ID
- Hardware Labeling
BMP51 Printer with AC Adaptor
BMP51 Printer, Li-Ion Battery Pack & AC Adaptor
BMP51 Printer, LabelMark 5 Software & AC Adaptor
BMP53 Peripheral Printer w/AC Adaptor
BMP53 Printer, Li-Ion Battery Pack & AC Adaptor
BMP53 Printer, LabelMark 5 Software & AC Adaptor
$430.00
$450.00
$579.00
$339.00
$359.00
$488.10
BMP50 Series Magnet Accessory
Lithium Ion Battery Pack
Lithium Ion Battery Pack w/AC Adaptor
Network Card - Bluetooth and WIFI
Network Card - Ethernet only
Network Card - Bluetooth/WIFI/Ethernet
BMP50 Series Hard Carrying Case
Soft Carrying Case for BMP50 Series
BMP50 AC Adaptor/Battery Charger
BMP50 USB Cable
BMP50 Spare Battery Tray
LabelMark 5 Standard Software
$25.00
$85.00
$99.00
$70.00
$85.00
$100.00
$50.00
$29.99
$59.00
$16.95
$15.00
$219.00
Datacomtools.com
TM
Product & Panel Applications:
- Work-in-Process Labels
- Rating and Serial Plate Labels
- Finished Goods Labels
Laboratory Applications:
- Tube and Vial ID
- Lean Lab Labeling
- Well Plate and Other Glassware ID
M50-MAGNET
BMP-UBP
NET-BT-WIFI-LAN
M50-SC
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
FF YHOAUSRE*
10%RAO
DY PURC
BMP™53 & 51 Labels
NEXT B
CODE:
COUPON
d
Bra y
Self-Laminating Cable Markers
Features a clear, non-printable area that wraps
around the cable and serves as an overlaminate
to the printed text. Offers superior resistance to
abrasion, dirt, oils, solvents, and water.
Dimensions
Part #
Color
A
B
C
B-427 – Self-Laminating Vinyl
M-19-427 BK on WT 1”
1” .375”
M-102-427 BK on WT .5” 1.25” .375”
M-115-427 BK on WT 1.5” 1.25” .5”
M-103-427 BK on WT 1” 1.25” .5”
M-29-427 BK on WT .5” 1.5” .5”
M-30-427 BK on WT .75” 1.5” .5”
M-31-427 BK on WT 1” 1.5” .5”
M-31-427-YL BK on YL 1” 1.5” .5”
M-32-427 BK on WT 1.5” 1.5” .5”
M-21-427 BK on WT 1” 2.5” .75”
M-21-427-YL BK on YL 1” 2.5” .75”
M-116-427 BK on WT 1.5” 2.5” .75”
M-23-427 BK on WT 1”
4”
1”
M-23-427-YL BK on YL 1”
4”
1”
M-33-427 BK on WT 1.5” 4”
1”
M-34-427 BK on WT 1.5” 6” 1.5”
B-427 – Continuous Self-Laminating Vinyl
M-1000-427 BK on WT 25’ 1” .375”
M-1500-427 BK on WT 25’ 1.5” .5”
Labels
Sized to Fit
200 2pair Fiber/Coaxial, Single/Multi-Mode
200
CAT-6, 4pair UTP Copper
200
CAT-6, 4pair UTP Copper
200 CAT-6, 4pair UTP Copper, Fiber, Coaxial
360
CAT-6, 4pair UTP Copper
200
CAT-6, 4pair UTP Copper
200 CAT-6, 4pair UTP Copper, Fiber, Coaxial
200 CAT-6, 4pair UTP Copper, Fiber, Coaxial
180 CAT-6, 4pair UTP Copper, Fiber, Coaxial
80
25pair Copper, 4-12 pair Fiber, Coaxial
80
25pair Copper, 4-12 pair Fiber, Coaxial
80
25pair Copper, 4-12 pair Fiber, Coaxial
70 50pair Copper, 24 pair Fiber, Backbone
70 50pair Copper, 24 pair Fiber, Backbone
70
50pair Copper, 24pair Fiber, Backbone
40 100pair Copper,36 pair Fiber, Backbone
1
1
CAT-6, 4 pair UTP Copper
CAT-6, 4 pair UTP Copper
$36.06
$25.74
$37.10
$41.23
$46.38
$35.04
$43.29
$47.42
$48.44
$28.84
$31.94
$28.84
$38.19
$41.37
$47.42
$37.10
$55.60
$57.98
Self-Laminating Wire & Cable Markers
Features a clear, non-printable “tail” that wraps
around the wire and serves as an overlaminate to
the printed text. Protected print area offers
superior chemical and abrasion resistance.
Available as individual die-cut markers or
continuous cut-to-length labels.
Catalog #
Color
A
B
C
B-427 – Self-Laminating Vinyl
M-11-427 BK on WT .5 .75 .375
M-96-427 BK on WT 1
.75 .375
M-17-427 BK on WT .5
1
.375
M-18-427 BK on WT .75
1
.375
M-19-427 BK on WT 1
1
.375
M-102-427 BK on WT .5 1.25 .375
M-103-427 BK on WT 1 1.25 .5
M-115-427 BK on WT 1.5 1.25 .5
M-29-427 BK on WT .5 1.5
.5
M-30-427 BK on WT .75 1.5
.5
M-31-427 BK on WT 1
1.5
.5
M-31-427-YL BK on YL 1
1.5
.5
M-32-427 BK on WT 1.5 1.5
.5
M-21-427 BK on WT 1
2.5 .75
M-21-427-YL BK on YL 1
2.5 .75
M-116-427 BK on WT 1.5 2.5 .75
M-23-427 BK on WT 1
4
1
M-23-427-YL BK on YL 1
4
1
M-33-427 BK on WT 1.5
4
1
M-34-427 BK on WT 1.5
6
1.5
B-427 – Continuous Self-Laminating Vinyl
MC-750-427 BK on WT 25’ .75 .375
MC-1250-427 BK on WT 25’ 1.25 .5
Wire Gauge
Automation & Electrical Component Markers
Various sizes, colors and label types for marking
relays, solenoids, switches, drive motors, and
other components.
Catalog #
Color
B-422 – Gloss Polyester
M-7-422
BK on WT
M-17-422
BK on WT
M-19-422
BK on WT
MC-1000-422
BK on WT
M-29-422
BK on WT
M-30-422
BK on WT
B-428 – Metalized Polyester
M-17-428
BK on SV
M-24-428-BB
BK on SV
M-30-428
BK on SV
M-29-428
BK on SV
M-20-428
BK on SV
B-483 – Ultra Aggressive Polyester
M-61-483
BK on WT
M-20-483
BK on WT
B-499 – Nylon Cloth
M-11-499
BK on WT
M-84-499
BK on WT
M-132-499
BK on WT
M-78-499
BK on WT
B-595 – Indoor / Outdoor Vinyl Tape
MC-1000-595-OR-BK
BK on OR
0.160”
0.160”
0.210”
0.210”
0.210”
0.270”
0.270”
0.270”
0.320”
0.320”
0.320”
0.320”
0.320”
0.530”
0.530”
0.530”
0.850”
0.850”
0.850”
1.300”
360
200
360
200
200
200
200
200
360
200
200
200
180
80
80
80
70
70
70
40
$38.97
$27.81
$45.47
$31.94
$36.06
$25.74
$41.23
$37.10
$46.38
$35.04
$43.29
$47.42
$48.44
$28.84
$31.94
$28.84
$38.19
$41.37
$47.75
$37.10
16 - 10 Gauge
10 - 4 Gauge
0.270”
0.530”
1
1
$45.84
$56.65
B Inch
Labels/Roll
.5
1
1
1
1.5
1.5
.5
.5
1
25’
.5
.75
280
360
200
1
360
200
$31.94
$42.62
$36.00
$56.69
$47.32
$44.32
1
1.13
1.5
1.5
2
.5
.5
.75
.5
1
360
360
260
360
80
$50.04
$44.04
$44.75
$57.06
$32.02
2
2
.5
1
80
80
$22.66
$28.84
.75
.9
1.25
1.9
.5
.5
1.5
1
220
200
160
100
$26.58
$27.52
$49.58
$37.96
1
25’
1
$47.25
PermaSleeve PS Wire Marking Sleeves
These heat-shrink sleeves are the ultimate in
marker durability, permanence and aesthetic
appearance. Fast shrink rate saves time and costs
during installation. Available as individual die-cut
markers or continuous cut-to-length tubing.
Max. Wire Dia Labels/Roll
16 - 10 Gauge
16 - 10 Gauge
12 - 10 Gauge
12 - 10 Gauge
12 - 10 Gauge
10 - 4 Gauge
10 - 4 Gauge
10 - 4 Gauge
10 - 4 Gauge
10 - 4 Gauge
10 - 4 Gauge
10 - 4 Gauge
10 - 4 Gauge
3 Gauge - 2/0
3 Gauge - 2/0
3 Gauge - 2/0
3/0 - 400 kcmil
3/0 - 400 kcmil
3/0 - 400 kcmil
500 - 900 kcmil
A Inch
Catalog #
Color
A Inch B Inch
Wire Gauge
B-342 – PermaSleeve PS Wire Marking Sleeve
MC-125-342 BK on WT .235
7 ft
22-16 Gauge
MC-125-342-YL BK on YL .235
7 ft
22-16 Gauge
MC-187-342 BK on WT .335
7 ft
20-10 Gauge
MC-187-342-YL BK on YL .335
7 ft
20-10 Gauge
MC-250-342 BK on WT .439
7 ft
16-8 Gauge
MC-250-342-YL BK on YL .439
7 ft
16-8 Gauge
MC-375-342 BK on WT .645
7 ft
12-4 Gauge
M-125-1-342 BK on WT 1.015 .235 22-16 Gauge
M-187-1-342 BK on WT 1.015 .335 20-10 Gauge
M-375-1-342 BK on WT 1.015 .645
12-4 Gauge
Max. Wire
Diameter
Labels/
Roll
0.046 - 0.110
0.046 - 0.110
0.062 - 0.150
0.062 - 0.150
0.094 - 0.215
0.094 - 0.215
0.125 - 0.320
0.046 - 0.110
0.062 - 0.150
0.125 - 0.320
1
1
1
1
1
1
1
80
80
80
$38.94
$38.94
$42.76
$42.76
$47.07
$47.07
$68.99
$41.02
$45.05
$78.10
Control Panel and Electrical Panel Labels
Long-lasting, durable materials to quickly identify
control and electrical panels.
Repositionable Vinyl Cloth
Durable vinyl cloth wrap around wire and cable
markers made with an adhesive that allows the
markers to be removed cleanly and reapplied if
necessary.
Catalog #
Color
B-498 – Vinyl Cloth
M-7-498
BK on WT
M-11-498
BK on WT
M-163-498
BK on WT
M-18-498
BK on WT
M-19-498
BK on WT
M-31-498
BK on WT
A
B
Wire Gauge
Max. Wire Dia
Labels/Roll
.5
.5
.5
.75
1
1
.5
.75
1
1
1
1.5
22 -16 Gauge
16 - 10 Gauge
12 - 10 Gauge
12 - 10 Gauge
12 - 10 Gauge
10 - 4 Gauge
0.110”
.160”
.210”
.210”
.210”
.270”
240
220
180
180
160
160
Major Credit Cards Accepted
$33.68
$33.75
$33.14
$34.70
$29.71
$34.93
Catalog #
Color
B-428 – Metalized Polyester
M-17-428
BK on SV
M-29-428
BK on SV
M-20-428
BK on SV
B-595 – Indoor / Outdoor Vinyl Tape
MC-1500-595-WT-BK
BK on WT
MC-1500-595-YL-BK
BK on YL
MC-1500-595-OR-BK
BK on OR
MC-1500-595-BL-WT
WT on BL
MC-1500-595-RD-WT
WT on RD
MC-1500-595-GN-WT
WT on GN
MC-1500-595-WT-RD
RD on WT
MC-1500-595-CL-BK*
BK on CL
A Inch
B Inch
Labels/Roll
1
1.5
2
.5
.5
1
360
360
80
$50.04
$57.06
$32.02
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
25 ft.
25 ft.
25 ft.
25 ft.
25 ft.
25 ft.
25 ft.
20 ft.
1
1
1
1
1
1
1
1
$55.45
$55.85
$55.85
$55.85
$55.85
$55.85
$55.85
$37.23
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
11
The Way Label Making Should Be.
The BBP®31 Sign & Label Printer is exactly how a printer is supposed to be. It’s easy to
use. It’s packed with functionality. And best of all, it’s got so many material options that
this one printer can handle all of the labeling needs in your facility.
Seriously simple operation.
This printer is simple, your whole team can use it. Just type & print. It’s really that easy.
- Large touch-screen display with “touch and drag” moving and sizing
- 2-touch printing – just walk up and print!
- Drop, lock and print smart chip supplies for automatic label formatting
- Full size fold-down keyboard
- Stand alone or PC-connect operation
Multiple Label Types for every function
Chock-full of capabilities.
This one printer can take on all the different labeling needs of your facility. There are so many options packed into this printer, your applications are endless.
- Prints labels from ½” to 4” wide
- 192 built-in graphics, with quick import options for graphics and fonts
- Wizard-style apps for pipe ID, arc flash, and RTK chemical labels
- Templates for common label styles such as signs with headers and a library of 266 pre-made “pick and print” signs and labels
Hundreds of material options.
The BBP®31 Sign & Label Printer can print on continuous supplies, pre-cut labels and even pre-printed sign headers and chemical labels. Choose from:
- Indoor/Outdoor Grade Vinyl (12 colors)
- Pre-printed Right-to-Know Labels
- Magnetic Labels
- Raised Profile Engraved Plate
- Tag Stock
- Pre-printed ANSI/OSHA Safety Signs
- Reflective Tape
- And more!
- Low-Halide Polyester (16 colors)
- Repositionable Vinyl
- Glow-in-the-Dark Tape
- Substitute Labels
- Tamper Evident Labels
-Cold Temperature Labels
- Self-Laminating Wire Markers
Sign & Label Maker
BBP31 Printer with Brady 360 Basic Plan
BBP31 Printer with Brady 360 Preferred Plan
BBP31 Printer with Brady 360 Basic Plan and
Markware Std Software
BBP31-360B-MWL BBP31 Printer with Printer with Brady 360
Basic plan and MarkWare Lean Software
BBP31-360P-MWS BBP31 Printer with Brady 360 Preferred plan
and MarkWare Std Software
BBP31-360P-MWL BBP31 Printer with Brady 360 Preferred plan
and MarkWare Std Software
BBP31
BBP31-360B
BBP31-360P
BBP31-360B-MWS
$1795.00
$2154.00
$2395.00
$2590.00
$2590.00
$2790.00
$2790.00
*BBP31 Sign & Label Printer ships with printer, power cord, USB cable, drivers CD, stylus,
cleaning kit, cutter cleaning tool, quick start guide and documentation holder
12
Datacomtools.com
TM
BBP31 Ribbons
- Tough, smear-proof ribbons that produce
long-lasting printed text
- Print can withstand years in industrial areas
and outdoor conditions
- Ribbons ship in cartridges that drop straight
into printer with a “click”
Colors Available
- Black (B30-R10000)
- Black* (B30-R4300)
- Black* (B30-R6000)
- White
B30-R10000
B30-R4300
B30-R6000
B30-R10000-BL
B30-R10000-GN
B30-R10000-MA
B30-R10000-OR
B30-R10000-RD
B30-R10000-WT
B30-R4400-WT
B30-R10000-YL
- White**
- Red
- Green
- Blue
- Yellow
- Orange
- Magenta
BBP31 Heavy-Duty Print Ribbon - Black
BBP31 Heavy-Duty Print Ribbon - Black
BBP31 Heavy-Duty Print Ribbon - Black
BBP31 Heavy-Duty Print Ribbon - Blue
BBP31 Heavy-Duty Print Ribbon - Green
BBP31 Heavy-Duty Print Ribbon - Magenta
BBP31 Heavy-Duty Print Ribbon - Orange
BBP31 Heavy-Duty Print Ribbon - Red
BBP31 Heavy-Duty Print Ribbon - White
BBP31 Heavy-Duty Print Ribbon - White
BBP31 Heavy-Duty Print Ribbon - Yellow
$103.79
$53.00
$53.00
$103.79
$103.79
$103.79
$103.79
$103.79
$103.79
$53.00
$103.79
* NOTE: B30-R4300 ribbon for use with B-427 and B-438 materials only. B30-R6000
ribbon for use with B-593 material only.
** NOTE: B30-R4400-WT ribbon for use with B-593 material only.
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
FF YHOAUSRE*
10%RAO
DY PURC
BBP31 Labels
NEXT B
CODE:
COUPON
d
Bra y
Brady Indoor/Outdoor Vinyl (B-595)
For general facility and safety identification: Our
best industrial vinyl yet.
Available Colors:
- White
- Green
- Yellow
- Orange
- Red
- Black
- Blue
- Brown
- Gold
- Gray
- Purple
- Clear
Brady BBP31 Pre-Cut Blank Labels
General purpose, peel-off-and-apply identification.
Features:
- Durable, low-shrink vinyl with our most aggressive adhesive
- Conforms to irregular, curved, rough and highly textured surfaces (painted cinder
blocks, uneven wood, textured plastics, paper-jacketed pipes, powder-coated surfaces)
- Adheres to “difficult” low-surface energy items (PVC piping, blow-molded equipment
cases, ABS plastics, recycled plastics)
B30C-4000-595-XX
B30C-3000-595-XX*
B30C-2250-595-XX
B30C-1125-595-XX
B30C-500-595-XX
4” x 100’ Indoor/Outdoor Vinyl
3” X 100’ Indoor/Outdoor Vinyl
2.25” x 100’ Indoor/Outdoor Vinyl
1.125” x 100’ Indoor/Outdoor Vinyl
0.5” x 100’ Indoor/Outdoor Vinyl
$221.98
$197.31
$147.97
$98.63
$61.60
Available Colors:
- White
- Yellow
Features:
- Ideal for a wide range of labeling applications
- Includes 2 sizes that are pre-cut and pre-sized to fit heavy-duty rigid tags
- Indoor/outdoor grade material
- Conforms well to rough, irregular and “difficult to adhere to” surfaces
B30-25-595-BLNKXX
B30-241-595-BLNKXX
B30-219-595-BLNKWT
B30-242-595-BLNKWT
- Orange
- Black
- Brown
- Ochre
- Tan
- Gray
- Purple
- Pink
Features:
- Low-halide content for labeling stainless steel pipes and surfaces
- Applies best to very smooth surfaces and ideal for mounting to rigid panels
B30C-4000-569-XX
B30C-3000-569-WT
B30C-2250-569-XX
B30C-1125-569-XX
B30C-500-569-XX
4” x 100’ Low Halide Polyester
3” x 100’ Low Halide Polyester (white)
2.25” x 100’ Low Halide Polyester
1.125” x 100’ Low Halide Polyester
0.5” x 100’ Low-Halide Polyester
Available Colors:
- Silver
- Yellow
Features:
- Ideal for labeling outdoor poles & pedestals, jobsite equipment & roof-top equipment
- Recommended low light or inclement weather conditions
$232.07
$207.64
$158.77
$109.90
$73.25
Features:
- Conformable material designed to adhere to highly curved surfaces, wires and cables
- Features a white printable area with clear “tail” that wraps around marker
- Clear tail serves as over-laminate to protect the text, providing superior resistance to
abrasion, dirt, oils, solvents, water and excessive handling
Labels
4000
4000
3000
3300
2800
2750
1800
2300
1500
1500
1000
600
400
A
.5”
1”
.5”
1”
.5”
1”
1.5”
1”
1.5”
1”
1.5”
1.5”
1.5”
B
.75”
.75”
1”
1”
1.25”
1.25”
1.25”
1.5”
1.5”
2.5”
2.5”
4”
6”
Major Credit Cards Accepted
C
.375”
.375”
.375”
.375”
.5”
.5”
.5”
.5”
.5”
.75”
.75”
1”
1.5”
$89.20
$89.20
$89.20
$157.45
$89.20
$178.45
$146.95
$178.45
$146.95
$178.45
$146.95
$146.95
$146.95
$305.39
$195.42
$122.12
Repositionable Vinyl For 5S and lean applications.
Available Colors:
- White
- Yellow
BBP31 Self-Laminating Cable & Wire Labels
For wire and cable identification: Our most popular
wire & cable labels.
For Data Cables Sized to Fit
Wire Gauge
B30-228-427
16-10 Gauge
B30-229-427
16-10 Gauge
B30-232-427
2 pair/fiber coaxial, SM/MM
12-10 Gauge
B30-179-427
2 pair fiber/coaxial, SM/MM
12-10 Gauge
B30-231-427
CAT-5, 4 pair UTP Copper
10-4 Gauge
B30-227-427 CAT-5, 4 pair Copper/Fiber Coaxial 10-4 Gauge
B30-225-427
CAT-5, 4 pair UTP Copper
10-4 Gauge
B30-233-427 CAT-5, 4 pair Copper/Fiber Coaxial 10-4 Gauge
B30-234-427 CAT-5, 4 pair Copper/Fiber, Coaxial 10-4 Gauge
B30-223-427 25pair Copper, 4-12pair Fiber Coaxial 3 Gauge-2/0
B30-224-427 25pair Copper, 4-12pair Fiber Coaxial 3 Gauge-2/0
B30-188-427 50pair Copper,24pair Fiber Backbone 3/0-400kcmil
B30-226-427
100pair Copper,36pair Fiber
3/0-400kcmil
Backbone
- Orange
B30C-4000-584-XX 4” x 50’ Retro Reflective Tape
B30C-2250-584-XX 2.25” x 50’ Retro Reflective Tape
B30C-1125-584-XX 1.125” x 50’ Retro Reflective Tape
NOTE: Use ribbon catalog number B30-R4300
with these part numbers.
$221.98
$142.89
$61.60
$98.91
Retro Reflective Tape
For highly reflective identification that shines back
brightly when struck by light.
Brady BBP31 Low-Halide Polyester (B-569)
For labeling stainless steel and smooth surfaces.
Available Colors:
- Clear
- Blue
- White
- Light Blue
- Yellow
- Sky Blue
- Red
- Green
4” x 6” (175 Labels/Roll) Pre-Cut Blank Labels
2.25” x 3” (300 Labels/Roll) Pre-Cut Blank Labels
2.25” x 3.85” (250) White Pre-Cut Blank Labels
1.125” x 2.85” (300) White Pre-Cut Blank Labels
Features:
- Aggressive adhesive stays in place but removes cleanly w/o leaving adhesive residue
- Ideal for temporary, removable, & repositionable labels, like 5S & lean inventory labels
B30C-4000-581-XX
B30C-2250-581-XX
B30C-1125-581-XX
B30C-500-581-XX
4” x 100’ Repositionable Vinyl
2.25” x 100’ Repositionable Vinyl
1.125” X 100’ Repositionable Vinyl
0.5” x 100’ Repositionable Vinyl
$221.98
$147.97
$98.63
$61.60
Printable Magnetic Supply
Easiest and quickest material for removing and
repositioning.
Available Colors:
- White
- Yellow
Features:
- Non-adhesive magnetic material that can be printed on directly
- Ideal for reusable and repositionable identification applications
B30C-4250-509-XX 4.25” x 25’ Printable Magnetic Supply
B30C-2500-509-XX 2.5” X 25’ Printable Magnetic Supply
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$122.12
$91.57
13
Fast Connectors Tool Kit
The FAST Connector Tool Kit provides all the necessary installation tools required for fiber preparation
of 250µm or 900µm fibers applied to AFL’s new pre-polished FAST connectors. Included in the kit is the
new Universal multimode/single-mode Cleaver (CT-30A), AFL’s premier cleaver with a 16 position blade
and built-in fiber scrap collector. The tool kit effectively contains all the industry standard termination
tools and still permits an adequate storage area for extra FAST connectors for on-site convenience.
Kit Includes:
- Fiber Stripper
- Scissors
- Lint Free Cloth Wipes
- Fiber Prep Fluid
CS001201
Fast Connectors
FAST-SC-MM50-6
FAST-SC-MM62.5-6
FAST-SC-SM-6
FAST-SC-MM50L-6
FAST-ST-MM50-6
FAST-ST-MM62.5-6
FAST-ST-SM-6
FAST-ST-MM50L-6
FAST-LC-MM50-6
FAST-LC-MM62.5-6
FAST-LC-SM-6
FAST-LC-MM50L-6
- Fast Connector Installation and Assembly Instructions
- Strip Length Template
- Assembly Video
- Carrying Case
- CT-30A Universal Cleaver
FAST Connector Tool Kit
$1325.00
FAST-SC connector, 50/125um 6 Pack
FAST-SC connector, 62.5/125um 6 Pack
FAST-SC connector, Singlemode 6 Pack
FAST-SC connector, 10G Laser Optimized 50/125um 6 Pack
FAST-ST connector, 50/125um 6 Pack
FAST-ST connector, 62.5/125um 6 Pack
FAST-ST connector, Singlemode 6 Pack
FAST-ST connector, 10G Laser Optimized 50/125um 6 Pack
FAST-LC connector, 50/125um 6 Pack
FAST-LC connector, 62.5/125um 6 Pack
FAST-LC connector, Singlemode 6 Pack
FAST-LC connector, 10G Laser Optimized 50/125um 6 Pack
$52.80
$52.80
$66.75
$55.65
$55.10
$55.15
$68.25
$58.50
$58.35
$58.35
$86.70
$61.30
Opt-X Fiber Tool Kits
Compatible with
FAST-CURE &
THREADLOCK
Connectors
49800-MTK
49800-FTK
49800-UTP
The Opt-X Light Fiber Tool Kit contains all the essential for field termination of Leviton’s Fast-Cure &
Threadlock connectors. It’s convenient, cost-effective, as well as single/multimode compatible.
- All essential tools necessary for fiber connector terminations.
- Singlemode and multimode compatible.
- 100X inspection scope with oblique illumination, precision optics and laser safety filters.
- 900µm buffer remover tool provides easy buffer removal without breaking fiber, plus-0mm.
- +127mm accuracy without adjustments.
49800-MTK
49800-FTK
49800-UTP
49800-LAK
49800-SMK
Opt-X Light Tool Kit (fast-cure & threadlock connector compatible)
Opt-X Fast-Cure Tool Kit (Fast-cure connector compatible)
Opt-X Pro Tool Kit (threadlock connector compatible)
FastCAM Tool Kit w/ LYNX cleaver, work tray and gooseneck LED
FastCAM Tool Kit w/ CT30A Cleaver
$405.00
$815.00
$650.00
$1155.00
$2145.00
Threadlock Connectors
SC
LC
ST
SC
REUSABLE
CONNECTORS!
49990-MST
49990-MSC
49990-ML2
49990-MDL
49990-SST
49990-SSC
49990-SL2
49990-SDL
14
ST Fast-cure Multimode 62.5 or 50µm
SC Fast-cure Multimode 62.5 or 50µm
LC Fast-cure Multimode 3mm boot
LC Fast-cure Multimode 9mm boot
ST Fast-cure connector Singlemode
SC Fast-cure connector Singlemode
LC Fast-cure Singlemode 3mm boot
LC Fast-cure Singlemode 9mm boot
Datacomtools.com
TM
$4.25
$4.55
$4.80
$4.80
$10.60
$7.60
$8.85
$8.80
49884-MSC
49882-MST
49884-SSC
49882-SST
49885-SBS
49884-DPC
SC threadlock Multimode 62.5 or 50µm
ST threadlock multimode 6.25 or 50µm
SC threadlock singlemode connector
ST threadlock singlemode connector
Fiber optic silicone build-up sleeve kit
Threadlock SC duplex clip (25 bag)
$11.10
$7.95
$13.25
$7.35
$4.80
$11.50
LEVITON CONNECTORS
Fast-Cure Connectors
ST
Opt-X Pro Tool Kit Includes:
- Compact lightweight case
- Jacket Stripper
- Buffer Remover (2)
- Scissors
- Marking pen
- Safety glasses
- Threadlock versa cleave tool
- Music wire
- Inspection scope
- Polishing pad & fixture
Opt-X-Fast-Cure Tool Kit Includes:
- Lightweight case
- 200x inspection scope
- Buffer remover
- Polishing pad
- 2.55mm & polishing fixture
- LC scope adapter
- Fiber optic crimp tool
- Safety glasses
- Scissors
- Jacket stripper
- Music wire
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Fiber Termination Kit
Achieve faster fiber terminations and higher performance with Siemon’s LightSpeed Termination Kit.
This kit contains all the tools required for termination of singlemode or multimode ST or SC connectors
- packaged in a rugged canvas case. All consumables are available in consumables kit.
FTERM-LC: Fiber Termination
Upgrade Kit
- The case is constructed using a durable, black canvas material and designed with interior padded
pouches and exterior velcro flap pockets providing security plus easy access to all items.
- A universal polishing puck is used for both ST and SC connectors
- All tools, consumables, & accessories are of the best quality for ease of use.
- A universal jack stripper is used for stripping simplex fiber cable with a diameter range of .75 - 4.0mm
- A non-slip work mat is included. The mat is constructed of a soft material for making fiber terminations.
- New cleave tool features a double-sided sapphire blade to provide twice the usable life.
The Siemon LC upgrade kit is used in conjunction with the LightSpeed Termination Kit (FTERM-L2) and
has all the accessories to terminate LC connectors using Siemon’s exclusive LightSpeed adhesive. The
kit includes an LC polishing puck and a micro-torch* (to shrink the color-coded LC crimp sleeve tubings).
LightSpeed Fiber Termination Kit
Fiber Termination LC Upgrade Kit
FTERM-L2
FTERM-LC
FTERM-L2
$895.00
$215.00
LC Multimode, buffered fiber, beige foot
LC Singlemode, jacketed fiber, white foot
Multimode buffered fiber, beige foot
Multimode, buffered fiber, beige foot
Simplex, Singlemode buffered fiber
FC1-LC-MM-B80
FC1-LC-SM-B02
FC1-SC-MM-B80
FC1-SA-MM-B80
FC1-SA-SM-B02
$5.08
$8.75
$5.10
$5.75
$11.25
SC
ST
LC
CONNECTORS
Siemon connectivity utilizes ceramic ferrules in conjunction with our LightSpeed® Termination Kits to
deliver superior quality and optical performance.
XLR8 Fiber Termination Kit
Siemon’s new XLR8 mechanical splice termination kit incorporates an exclusive
dual-process activation tool which dramatically reduces termination time per connector. The tool kit is
universal - capable of terminating both SC and LC interfaces.
- Single Step Termination - XLR8 tool combines both splice activation and mechanical crimp into a single,
optimized step
- Robust Process - Single-step termination eliminates the need to handle the connector between splice
and crimp processes, maintaining integrity of the splice
- Flexible Ergonomics - Tool optimized for use in handheld or table-top orientation
- Reduced Risk of Polish Contamination - All termination steps completed w/connector dust cap in place
- LC/SC Compatibility - Tool terminates both LC and SC connectors with no time-consuming changeover
required
- Fiber Alignment Aid - Smooth alignment channel simplifies fiber insertion and avoids damage to fiber
end face
- Precision cleaver - Kit features a user-friendly fiber cleaver designed to provide clean, precise and high
performance cleaves on an array of fiber types
Product Contains
- Activation tool
- Jacket stripper
FTERM-XLR8
- Buffer stripper
- Scissors
- Precision cleaver
- Strip template
- Marker
- Alcohol pads
XLR8 Fiber Termination Kit
- Electrical tape
- Convenient carrying case
$1735.00
Fiber Connectors
FC1M-LC-5L-B12
FC1M-LC6MM-B80
FC1M-LC-5MM-B01
FC1M-LC-SM-B06
FC1M-SC-5L-B12
FC1M-SC-6MM-B80
FC1M-SC-5MM-B01
FC1M-SC-SM-B06
LC Simplex, 50/125µm Laser Optimized, 900µm buffered fiber, Aqua boot (XGLO)
LC Simplex connectors, 62.5/125µm multimode, 900µm buffer fiber, beige boot (LightSystem)
LC Simplex connector, 50/125µm multimode, 900µm buffered fiber, black boot (LightSystem)
LC Simplex connector, singlemode, 900µm buffered fiber, blue boot (XGLO and LightSystem)
SC Simplex connector, 50/125µm laser optimized, 900µm buffered fiber, aqua boot (XGLO)
SC Simplex connector, 62.5/125µm multimode, 900µm buffered fiber, beige boot (LightSystem)
SC Simplex connector, 50/125µm multimode, 900µm buffered fiber, black boot (LightSystem)
SC Simplex connector, singlemode, 900µm buffered fiber, blue boot (XGLO and LightSystem)
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$13.75
$13.05
$13.75
$18.45
$13.75
$13.25
$13.75
$16.35
15
AFL Telecommunications
A Fujikura Business
FSM-18S Fusion Splicer
The FSM-18S Fusion Splicer is a low cost, fixed V-Groove, single fiber fusion splicer with the same
robust features offered in other high end models. The new rugged construction added improved
reliability by resisting shock, dust, and rain, and withstand a 30” drop test.
Splicer Includes:
- ADC-13 AC Adapter
- ACC-14 AC Cord
- Spare Electrodes
- Sheath Clamp
- USB Cable
- Splicer Carrying Strap
- Quick Reference Guide - Video Instruction Manual
- Sleeve Cooling Tray
- Transit Case
- CT30A Cleaver & stripper (S014528 & S014560)
- BTR-08 Battery, & DCC-14 Battery Cord (S014560)
Applicable Fibers
Cladding Diameter
Fiber Cleave Length
Average Splice Loss
Splicing Time
Arc Calibration Method
Splicing Modes
Splice Loss Estimate
Storage of Splice Result
Fiber Display
Magnification
Viewing Method
Operation Condition
Mechanical Proof Test
Tube Heater
Protection Sleeve Length
Splice/Heat with Battery
Power Supply
Wind Protection
Dimensions
Single-mode, Multimode, DS, NZDS
125µm
8 to 16mm with 250µm coating diameter, 16mm with 900µm coating dia.
0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS
Typical 11 seconds with standard single-mode fiber
Automatic, real-time by using results of splice when in AUTO, Manual
100 preset and user programmable modes
Based upon dual camera cladding axis alignment data
Last 2000 results to be stored in the internal memory
X or Y, or both X and Y simultaneously
300X for single X or Y simultaneously; front or rear monitor display options
Dual cameras with 4.1” TFT color LCD monitor with anti-reflective coating
0 to 3.660m above sea level, 0 to 95%RH, -10 to 50°C
1.96 to 2.25N
Built-in tube heater with 30 heating modes; auto-start function
60mm, 40mm, micro
Typical 150 cycles with power save functions activated
100 to 240V AC or 10 to 15V DC with ADC-1, 13.2V DC w/BTR-08 battery
Maximum wind velocity of 15m/s (34mph)
5.3”W x 6.3”D x 5.6”H
FSM-18S Fusion Splicer (Machine Only)
FSM-18S Fusion Splicer Kit (with Cleaver and Stripper)
FSM-18S Fusion Splicer Kit (with Cleaver, stripper, battery and cord)
S014527
S014528
S014560
$6250.00
$7150.00
$7475.00
FSM-60S Fusion Splicer
FSM-60S splices a fiber in 9 seconds & heats a 60mm splice sleeve in 30 seconds, for a time of only
39 seconds. New software included provides the ability to download splice data to a PC for splice
data reporting, download splicer operating software via the internet to maintain peak performance.
Splicer Includes:
- FSM-11S Fusion Splicer
- FH-50-250 Fiber Holders
- BTC-04 Battery Charger
- BTR-07 Battery
- Space Electrodes (Pair)
Applicable fibers
Cladding/coating dia.
Fiber cleave length
Average splice loss
Arc calibration method
Splicing modes
Splice loss estimate
Storage of splice result
Fiber display
Magnification
View method
Operation condition
Mechanical proof test
Tube heating time
Protection sleeve length
Splice/heat with battery
Power supply
Wind protection
Weight
- Operation Manual
- Transit Case
- CT-30 Cleaver (kit only)
Single-mode, Multimode, DS, NZDS
80μm to 150μm/100μm to 1000μm
8 to 16mm with 250μm coating dia, 16mm with 900μm coating dia
0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS
Automatic, real-time by results of splice when in AUTO mode, Manual
100 preset and user programmable modes
Based upon dual camera core alignment data
Last 2000 results to be stored in the internal memory
X or Y, or both X & Y simultaneously, Front or rear monitor display options
300X for single X or Y view, or 187X for X and Y view
Dual camera with 4.1” TFT color LCD monitor
0 to 5000m above sea level, 0 to 95%RH and -10 to 50ºC
1.96 to 2.25N
30 sec. w/FP-03 sleeve, 35 sec. w/FP3(40), 35-55 sec. w/micro sleeves
60mm, 40mm, micro
Typical 160 cycles with power save function activated
100-240V AC or 10-15V DC w/ADC-11, 13.2V DC w/BTR-08 battery
Maximum wind velocity for 15m/s (34mph)
5.1lbs with AC adapter ADC-11; 5.9lbs with BTR-08 battery
FSM-60S Splicer (Machine Only)
FSM-60S Splicer Kit (w/cleaver)
FSM-60S Splicer Kit (w/cleaver, battery, & cord)
S014531
S014532
S014562
$15000.00
$15800.00
$16225.00
Splice Sleeves
Splice Protection Sleeves
Specially designed for optical components. These
micro sleeves provide the known reliability of
sleeves in the smallest possible lengths.
Standard Sleeves: Dimensions & Applicable Fiber (Solid in packs of 250)
Part #
Model
Fiber
Len.
Cleave L.
Dia. After
FP-03 for single fiber up to 900 microns
S000065
FP-03
60mm
16mm
3.1mm (max)
S000206
FP-03(40)
40mm
10mm
3.1mm (max)
FP-04(T) and FP-05 for ribbon fiber (coating thickness of 0.44mm or less)
S002105
FP04(T)
8
40mm
10mm
4.1mm (max)
S003027
FP-05
12
40mm
10mm
4.5mm (max)
16
Datacomtools.com
TM
Price
$155.00
$170.00
$1050.00
$475.00
MicroSleeves: Dimensions & Applicable Fiber (Sold in Packs of 250)
FPS01-900 Series for single fibers up to 900 Micron Fiber
S012684
FPS01-900-15
15mm
4mm
2.3mm
S012688
FPS01-900-20
20mm
6mm
2.3mm
S011954
FPS01-900-25
25mm
6mm
2.3mm
S012692
FPS01-900-34
34mm
13mm
2.3mm
S012696
FPS01-900-45
45mm
16mm
2.3mm
FPS01-400 Series for single fibers up to 400 Micron Fiber
S014088
FPS01-400-12
4mm
4mm
1.5mm
S012668
FPS01-400-15
4mm
4mm
1.5mm
S012672
FPS01-400-20
8mm
8mm
1.5mm
S012676
FPS01-400-25
10mm
10mm
1.5mm
S012680
FPS01-400-34
15mm
15mm
1.5mm
S011914
FPS01-400-40
16mm
16mm
1.5mm
$175.00
$212.50
$170.00
$225.00
$375.00
$212.50
$212.50
$212.50
$162.50
$175.00
$170.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Fiber Optic Visual Fault Finder
Fiber Optic Cable Tester
- Simple, versatile, and user-friendly design
- Rugged, compact, and splash proof aluminum housing
- 650nm laser
- High output ≥ 0.5mW
- Continuous wave output mode (CW) for steady illumination
- Blinking output mode increases viewing contrast
- Support 2.5mm connect (for PC/FC/SC/ST)
- The button switch permits one-handed operation
Specifications:
Laser Class
Operating Temp.
Storage Temp.
Dimension length
902-186
- Connector Type 1.25mm (LC)
- Nominal Wavelength 650nm±10nm
- Diameter: 1/2”
- Batteries 2X AAA (not included)
- Individual Packing box w/black EVA inner case
Range approx.
4km
Specifications:
Light Source
Temperature Operating Temp.:
Storage Temp.:
Size Length:
Class 3A laser dicode
0 ~ +40°C
0 ~ +50°C
160mm, dia 13.5mm
Fiber optic cable tester
$89.95
The Visual Fault Finder is a light source used to locate break,
poor mechanical splices and damaged connectors is fiber optic
cables. Its perfect to verify continuity, test and find breaks in
fiber links, or anywhere fiber optic cables are terminated and
subject to mechanical damage
VFF5
- Bright red visible laser light source
- Speeds fiber tracing and identification
- Case survives drops, impacts, & vibrations
- 80 hours of battery life w/2 AA batteries
- Lanyard
- Instruction sheets
VFF5 visual fault finder
$275.00
Visual fault finder
Visual fault finder keychain
$370.00
$265.00
$325.00
170XL
Visual fault finder
$405.00
FiberViewer Inspection Scope
Use FiberViewer microscopes to ensure fiber
terminations are smooth and clean. Avoid the
#1 cause of fiber link failure: dirty
end-faces.
Leviton’s inspections scopes allow techs to view
multimode and singlemode end-face polished safely
and reduce change of over polishing (a side effect
of many coaxial inspection scopes). The 200X scope
features oblique viewing technology, ergonomic grip,
200X magnification and full laser eye protections
through wavelength of 850-1550 nanometer.
Major Credit Cards Accepted
VisiFault visual fault finder
- Continuous wave output mode for steady fault location.
- Find breaks to 3km.
- Blinking output mode increases viewing contrast.
- Easy & quick interface fits all 2.5mm connector
interfaces (FC, ST, SC).
- Ergonomic rotary switch permits easy
one-handed operation.
- Rugged, compact and splash proof
aluminum design.
100-200x Inspection Scopes
100x inspection scope
200x inspection scope
VisiFault
Visual Fault Finder
The HILite and VFI2 are compact but
powerful visible red laser designed to
troubleshoot faults on fiber optic cables.
Light generated by these units will escape
from sharp bends and breaks in jacketed
or bare fibers, as well as poorly mated
connectors. They can identify faults in
fiber optic jumper cables, distribution
frames, patch panels, and splices trays.
49886-SCP
49886-FSP
$92.35
The visual fault locator can locate fibers, verifies
continuity and polarity, and helps find breaks in cables,
connectors, and splices. Compatible with 2.5mm and
1.25mm connector for easy connection.
HILite & VFI2 Visual Fault Finders
VFI2
HILITE
Fiber optic visual fault finder
VisiFault
VFF5 Visual Vault Finder
VFF5 includes:
- Carrying Case
- Lens Cap
- Batteries
MT-7509
Class 3A laser diode
0~40°C
-20°C~60°C
6”
- Easy, manual focus of precision optics
- Factory-tested filters to protect eyes from
harmful light exposure
- Universal adapters allow for inspection of
end faces on many different connector types
- Available in 200x or 400x
$195.00
$220.00
FT120
FT140
FiberViewer 200x inspection scope
FiberViewer 400x inspection scope
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$425.00
$480.00
17
OWL Installer Series test kits
Download and Print Reports with these economical Fiber Testers
The real value of OWL Installer
Series test kits is the ability to
certify fiber links, a feature no
fiber cable installer should go
without. Not only are customers
increasingly demanding printed
certification reports for their fiber
installations, certification reports
are also proof of an installer’s job
well done in case of disputes.
Wouldn’t it make more sense
to spend less for a test kit with
superior specifications AND fiber
certification report printing?
That’s what you get with OWL
Installer Series test kits.
IS-KIT-M
IS-KIT-Q
Installer Series Multimode Test Kit
$740.00
Installer Series Quad Multimode/Singlemode Test Kit $1535.00
Many fiber optic network bids and Requests For Quote (RFQ) are citing
cabling standards to specify the set of guidelines (such as fiber length) that
the network installer must follow during the network installation. Adherence
to such standards is meant to ensure the quality of the installation and
guarantee that the network will perform as it was designed.
The process of testing a network installation to ensure its adherence to
specified standards is called certification, and often requires hardcopy
documentation as proof of adherence to standards. The Installer Series
Quad MM/SM Test Kit contains the tools necessary for certifying fiber optic
links against a myriad of cabling standards, including two user-customizable
standards, in both multimode and singlemode networks.
The Micro OWL 2 optical power meter is multimode and singlemode ready,
and contains a user-friendly Fiber Link Wizard that performs link budget
calculation, and sets a reference value using the characteristics of the link.
This reference is the PASS/FAIL threshold and is calculated against the
chosen standard. Up to 1000 fiber runs may be stored, and downloaded to a
PC for report generation using our OWL Reporter software. Its universal port
allows connections to ST, SC, and FC, and also includes a 1.25mm universal
port for connection to LC, MU, and other SFF connectors.
The WaveSource Quad fiber optic light source contains all four popular
industry-standard wavelengths in a single unit, designed for accurate testing
and certification of multimode (850nm & 1300nm) and singlemode (1310nm
& 1550nm) networks. Its quad-wavelength outputs are temperaturestabilized for accurate measurements, and are housed in SC connector ports.
Optical Fiber Inspection Scope
The Noyes OFS 300 from AFL Telecommunications is a versatile Optical Fiber
Scope with precision 200X magnification. This handheld and rugged scope
is used for inspection of optical fiber connectors for scratches, dirt, or other
problems normally associated with poor transmission performance.
The OFS 300 offers 60 hours of
continuous battery life from standard
2 x AA batteries and features an LED
indicator, which will flash when
batteries require replacement.
A built-in laser safety filter provides > 40 dB IR protection to reduce risk of
injury to the eye if accidentally viewing an active fiber. The OFS 300 features
a universal adapter cap mount that accepts a variety of Noyes thread-on style
adapter caps to ease inspection of many connector style. A momentary power
switch located on the top panel keeps one hand free for focusing.
- Laser safety filter installed
- Universal adapter interface
- Low battery LED indicator
- Long battery life with 2 x AA alkaline
- Tripod mount
- Rugged, handheld, easy to use
OFS-300-200C
200x optical fiber inspection scope
$410.00
Screw-On Adapter Caps
The standard thread-on adapter caps are used to mate non-angled and
angled single-fiber and dual-fiber connectors to optical power meter ports on
OPM power meters and OFS inspection scopes.
8800-00-0224
8800-00-0224
8800-00-0214
8800-00-0200
8800-00-0209
8800-00-0202
8800-00-0221
8800-00-0204
18
8800-00-0200
8800-00-0202
1.25mm universal screw-on adapter cap
2.5mm universal screw-on adapter cap
FC screw-on adapter cap
SC screw-on adapter cap
ST screw-on adapter cap
E-2000 screw-on adapter cap
Biconic screw-on adapter cap
Datacomtools.com
TM
8800-00-0209
$55.00
$55.00
$55.00
$55.00
$55.00
$205.00
$55.00
8800-00-0203
8800-00-0225
8800-00-0210
8800-00-0211
8800-00-0205
8800-00-0201
8800-00-0219
8800-00-0223
8800-00-0226
8800-00-0230
8800-00-0231
SMA screw-on adapter cap
LC simplex/duplex screw-on adapter cap
ESCON screw-on adapter cap
DIN 47256 screw-on adapter cap
FDDI screw-on adapter cap
D4 screw-on adapter cap
OptiTap 2.5mm screw-on adapter cap
1000µm bare fiber (plastic) adapter cap
MU simplex screw-on adapter cap
MT-RJ (A side only) screw-on adapter cap
MT-RJ (A or B side) screw-on adapter cap
$55.00
$110.00
$299.00
$55.00
$55.00
$55.00
$55.00
$55.00
$115.00
$115.00
$120.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Single/Multimode Test Kit w/Wave ID & Set Reference
The SMLP5-5 test kit combines the OPM5-2D optical power meter and OLS4
integrated LED and LASER light source and is ideally suited for testing fiber
optic networks with hybrid (single-mode and multimode) cables.
Using the supplied Windows compatible software and USB connection, test
records may be transferred to a PC for storage, display, analysis, and printing.
Test Results Storage, Transfer, and Post Processing with TRM™
The OPM5 File Management system allows technicians to organize test results
into multiple files and transfer stored results via USB to a PC for analyzing,
generating reports, and printing.
The supplied powerful PC Analysis & Reporting Tool (TRM - Test Results
Management software) allows users to apply industry standards based rules to
test results and create comprehensive certification reports. Users can generate
network Pass/Fail results demonstrating compliance to industry standards and
illustrate headroom. TRM is a Windows® compatible software.
Features
- Hand-held, rugged, lightweight
- Test single-mode and multimode networks
- USB port for transfer of stored results
- TRM™ Reporting Software (Windows compatible)
- Certification Testing and Report Generation
Applications
- Certify multimode and single-mode links per TIA/EIA standards
- Fiber identification prior to splicing
- Passive Optical Networks (PON) testing
- Save test data for Report Generation with NOYES TRM™ Software
SMLP5-5
Single/multimode test kit w/data storage
SLMP5-5 Contains:
- OLS4 optical light source
- OPM5-2D power meter
- AA batteries
- Protective rubber boots
- Adapter cap
- Windows® software and user’s guide
- 50 and 62.5 µm mandrels
- Carry case
$2800.00
Contractor Series Test Kit with Set Reference
Single-mode Test Kit with Wave ID & Set Reference
Economically Priced!
These test kits combine
an optical power meter
and the Laser light
source and is ideally
sited for testing SM
fiber optic networks. The
SLP5-6D performs loss
measurements on SM fiber
at 1310 & 1550nm.
Combining the CSM2
optical power meter and
the CSS-MM Dual LED light
source, the CMK2 is a
cost-effective test
kit designed for
performing insertion
loss measurements on
multimode fiber optic links.
CKM Contains:
- CSS1-MM Dual LED source
- CSM1-2 optical power meter
- AA batteries
- 2.5mm universal adapter cap
- UCI-SC connector
- 50 and 62.5 µm mandrels
- User’s guide
CKSM-2
CKM-2
CKSM Contains:
- CSS1-MM Dual LED source
- CSS1-SM Dual Laser source
- CSM1-2 optical power meter
- AA batteries
- 2.5 mm universal adapter cap
- UCI-SC connector
- 50 and 62.5 µm mandrels
- User’s guide
Multi/singlemode contractor series test kit
Multimode contractor series test kit
Major Credit Cards Accepted
$1545.00
$796.00
SLP4-6D Contains:
- OLS2-Dual optical light source
- OPM5-4D optical power meter
- AA batteries
- protective rubber boots
- adapter cap
- USB cable
- Windows® compatible
software and user’s guide
- SLP5-6D test kit user’s guide
- carry case
SLP4-6D
SLP5-6D
SLP5-6D Contains:
- OLS2-Dual optical light source
- OPM4-4D optical power meter
- AA batteries
- protective rubber boots
- adapter cap
- SLP4-6D test kit user’s guide
- Carry case
Singlemode test kit
Singlemode test kit with data storage
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$2060.00
$2435.00
19
SimpliFiber Pro Fiber Optical Loss Test Kits
With new advanced capabilities that make testing simple, SimpliFiber® Pro Optical
Power Meter and Fiber Test Kits are the best “go-to” kits for anyone involved in first-line
optical fiber cabling installation and verification. Whether you are a fiber technician or
contractor, our expertly configured kits contain all the tools necessary to quickly measure
loss and power levels, locate faults and polarity issues, and inspect and clean connector
end-faces. Industry-leading features such as single-port dual-wavelength testing and
auto-wavelength detection, combined with time-saving capabilities such as CheckActive™,
FindFiber™, and Min/Max make SimpliFiber Pro the best fiber test kit on the market.
FTK-1450
- Dual-wavelength testing – complete testing in half the time
- Additional wavelengths to include 1490 and 1625 – calibrated to extend from typical
enterprise wavelengths for broader applications
- Min/Max – precision tracking of intermittent power fluctuations, a superior alternative to
the inaccurate “wiggle” test
- CheckActive – audible tone and display icon alerts you to a live wire
- Saves 1000 results – large internal memory enables continuous testing and recording;
fully compatible with our popular LinkWare™ Cable Test Management Software
- Quickly locate cable fault, polarity, and connector problems with VisiFault VFL*
- Inspect end-faces at 200x magnification with the FT120 FiberViewer or FT500
FiberInspector Mini*
*Not available in all kit configurations
FTK1350
FTK1300
FTK2000
FTK1000
Features
SimpliFiber Pro power meter
850/1300 multimode source (SC port)
1310/1550 singlemode source (SC port)
FindFiber Remote ID source
FT120 FiberViewer optical microscope
VisiFault VFL
LC and ST adapters
FT500 FiberViewer video microscope
NFC-KIT-BOX cleaning equipment
Carrying case
FTK1450
FTK1350
FTK1300
Complete fiber verification kit
Verification kit w/fiberinspector mini
Verification kit w/fiberviewer
FTK1450
•
•
•
(2)
FTK1350
•
•
FTK1300
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
$6535.00
$4455.00
$3205.00
FTK2000
•
FTK1000
•
•
•
•
•
FTK2000
FTK1000
•
Basic verification kit
Basic verification kit
•
$3025.00
$2155.00
FiberMASTER Fiber Optic Test Kit
- Calibration Function - stores reference power level for quick dB loss
measurements eliminating the need to manually calculate loss.
- Save Time and Money - power meter features 2.5mm universal and
FC adapters, light source includes ST, SC and FC adapters to test the
most common interfaces.
- Ready for FTTx - 1490nm measurement wavelength for use with
nearly all single mode Fiber To The Home applications.
FiberMASTER
power meter and
light source
The FiberMASTER kit
Kit Contains:
- Light source
- Power meter
- FC-SC 62.5um multimode cables SC calibration coupler
- Carrying case
- English, Spanish, German, French, Portuguese, Italian and
Chinese user’s manual
33-928
20
Datacomtools.com
TM
Complete fiber verification kit
$755.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
SignalTEK-II
Handheld cable and network qualifier designed to confirm correct installation of copper and fiber cabling capable of
supporting voice, video, data and CCTV applications over 10/100 Megabit or Gigabit Ethernet. SignalTEK II is essential for all
installers of data cabling whether working in residential premises, small to medium-sized offices, or Ethernet environments.
Functions
Endpoint LAN testing over copper
IPv4 & IPv6
Advanced wiremap including length
Wiremap for cross-over cables (copper)
Wiremap for 2 pair copper cables
Wiremap for industrial cables
PoE/PoE+ detection + load current test
Tone generator
Traceroute test & Ping test
Port blink for visual cable tracing
Choice of power sources
DHCP client
10/100/1000 Mb/s
Network scan
Results storage/export
Near-End and remote loopback units supplied
Compatible with NaviTEK II/LanXPLORER active remotes
Full Gigabit cable performance test
VoIP performance test through hubs and switches
Web performance test through hubs and switches
Video performance test through hubs and switches
CCTV performance test through hubs and switches
User-exchangeable RJ45 inserts
Backlit color screen
Fiber performance test
Optical power indication
Endpoint LAN testing over fiber
Full Gigabit bi-directional
load testing
Test cabling and live networks
with full-rate Ethernet traffic to
1Gbps for true performance
Qualification
Ethernet troubleshooting
capabilities
Maximize Return on
Investment with the added
ability to identify Ethernet,
Power over Ethernet (PoE)
and PoE+ issues, in addition
to verifying Ethernet
connectivity
SignalTEK II
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
SignalTEK II FO
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Load test through hubs and
switches
Save money by measuring
available network speed
without needing to purchase
a separate transmission
tester
Versions to suit all requirements
SignalTEK II is available in two models with specifications to meet all user needs.
SignalTEK II which operates on copper networks and SignalTEK II FO which operates on
both copper and fiber optic networks
SignalTEK II - Operates on copper networks
R156000
SignalTEK® II
NEW!
$1835.00
1 x Near-End unit, 1 x Remote unit, 2 x Power module, 2 x Mains PSU/charger, 2 x 30cm RJ45 cable, 1
x Quick reference guide, 1 x User manual CD, 1 x Carrying case
SignalTEK II FO - Operates on both copper and fiber optic networks
R156001
SignalTEK® II FO
$2195.00
1 x Near-End unit, 1 x Remote unit, 2 x Power module, 2 x Mains PSU/charger, 2 x 30cm RJ45 cable, 1
x Quick reference guide, 1 x User manual CD, 1 x Carrying case
Suitable for both copper
and fiber
Eliminate the need to
purchase and carry multiple
different testers by using one
device to conduct active and
passive testing across both
copper and fiber networks
Wiremapping by pin as
well as pair
Save time on the job and
locate wiremap faults more
quickly and accurately by
testing via both pin and
pair, detecting split pairs
and identifying the distance
to fault
Reporting of test results
Simplify customer reporting
and create accurate
documentation on jobs
undertaken using SignalTEK
II to generate and store
test results in standards
compliant XML format.
Accessories
150054 1 x Active remote No. 1
$42.00
150050 1 x Active remote set No. 2 – 12
$445.00
151053 1 x NiMH power module
$84.95
150055 2 x Patch cables - 30cm, Cat. 5e STP
$29.95
151051 1 x Power supply with EU/UK/US adaptor
$94.95
SFP-850 2 x 1000BASE-SX, 850nm SFP modules (R156000) w/o Jumpers
$300.00
SFP-1310 2 x 1000BASE-LX, 1310nm SFP modules (R156000) w/o Jumpers
$775.00
SFP-1550 2 x 1000BASE-ZX, 1550nm SFP modules (R156000) w/o Jumpers $1400.00
62-164
1 x IDEAL amplifier probe
$101.10
150056 1 x Optical fiber multimode 2m duplex cable with LC-LC connectors
$91.95
150057 1 x Optical fiber singlemode 2m duplex cable with LC-LC connectors $99.95
150059 1 x Active remote set No. 2 to No. 6
$204.00
156050 1 x Carry case
$105.00
150058 1 x RJ45 insert extraction tool, 10 x Lifejack RJ45 inserts
$150.00
Singlemode & Multimode Fiber Optic Test Sets
Descriptions:
Insertion Loss Test Set for Multimode Fiber
Connector for FC, SC, or ST
Rugged package design
Easy-to-use portable package
850/1300nm loss measurements
1310/1550nm loss measurements
Included with Kits
560XL Optical Power Meter
580XL Optical Power Meter
570XL 850/1300nm LED Source
580XL 1310/1550nm LED Source
SOC Adapter
914B Carrying Case
5670XL-__*
5680XL-__*
5890XL-__*
5670
•
•
•
•
•
•
•
•
•
Multimode Fiber Optic Test Set
Singlemode Fiber Optic Test Set
Multimode/Singlemode Fiber Optic Test Set
Major Credit Cards Accepted
5680
•
•
•
•
•
•
•
•
•
5890
•
•
•
•
•
•
•
•
•
•
•
$1149.00
$1530.00
$1995.00
*The last two letters of the model number represents the
type of interface of the individual kit: FC, SC, or ST
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
21
MultiFiber Pro Optical Power Meter and Fiber Test Kits
Data centers are growing, fueled by the proliferation of media, virtualization and the need for more
security and storage. This creates a high demand for 40 Gbps+ fiber links. Whether it is using 10
Gbps pre-terminated fiber trunks or planning for next-generation 40/100 Gbps performance, data
centers are standardizing on Multi-fiber Push-on (MPO) connector solutions.
“SCAN ALL” Function: Scan All function in the MultiFiber Pro Power Meter automatically scans and
tests all 12 fibers in MPO connectors taking just 6 seconds to complete all loss or power
measurements. This feature automates the testing of MPO terminated fibers and eliminates the
time consuming and manual process of moving the tester from fiber to fiber while using fan-out
cords.
Built-in Polarity Verification: The simple purpose of any polarity scheme is to provide a
continuous connection from the link’s transmitter to the link’s receiver. For array connectors,
TIA-568-C.0 defines three methods to accomplish this. The polarity measurement of MultiFiber Pro
allows the user to test individual patch cords, permanent links, and channels for correct polarity.
On-board MPO connector: The MPO connector on both the OPM and OLS eliminates the use of
costly & complicated fan-out cords to test MPO fiber trunks.
Simple User Interface: Simplifies the task of simultaneously presenting polarity, power, and loss
results for 12 fibers. The power meter enables the users to easily comprehend the measurement
results of 12 fibers simultaneously. The light source identifies each fiber within the MPO connector
being tested. Any individual measurements that fail the test limit is identified to allow root-cause
analysis. This powerful yet straightforward test set enables everyone to become a fiber testing
expert increasing efficiency in testing data center projects.
Select an Individual Fiber: Drilling down to a single fiber during testing and troubleshooting is always a challenge in data centers. MuliFiber Pro can troubleshoot
a single fiber within an MPO trunk to provide a single fiber test result. This increases MPO connector verification and troubleshooting flexibility with more precise
reporting.
Environmental
Operating temperature
Storage temperature
Operating humidity
-10ºC to +50ºC
-20ºC to +50ºC
95% (10ºC to +35ºC) non-condensing
75% (35ºC to +45ºC) non-condensing
Uncontrolled <10ºC
Operating altitude
4,000 m
Storage altitude
12,000 m
Vibration Random
2 G, 5 Hz to 500 Hz
Optical Power Meter (Specifications apply at 23ºC (73ºF), unless otherwise noted.)
Detector type
InGaAs
Calibrated wavelengths
850 nm, 1300 nm, 1310 nm, 1550 nm
Measurement range
0 dBm to -50 dBm
Power measurement linearity ±0.1 dB1
Power measurement uncer- ±0.35 dB
tainty
Power measurement repeat- < 0.10 dB
ability
Display resolution, dB or dBm 0.01
Power display units
dBm, mW, μW
User-selectable limit for loss 0.05 dB to 50.0 dB, in increments of 0.05 dB up to 10.0
dB and 0.1 dB up to 50.0 dB
Auto wavelength detection
Yes
Polarity detection
Detects A, B, C, and Corning Plug & Play™ Universal
Systems polarities
2 kHz detection
Yes
Record storage
3000 records, one fiber per record (250 12-fiber cables)
External interface
USB 2.0, full speed
Optical connector
MPO interface for 12-fiber, unpinned plugs. Compatible
with 62.5 μm, 50 μm, and singlemode fibers. Connector
has a self-closing, protective cover.
Power requirement
2 AA alkaline batteries
Battery life2
>30 hours (typical)
Automatic power-off
10, 20, 30, or 60 minutes (can be disabled by the user)
Low battery warning
Low battery icon blinks
Size
5.7 in x 3.2 in x 1.5 in
Weight
10.9 oz (309 g)
850nm Source (Specifications apply at 23ºC (73ºF), unless otherwise noted)
Emitter type
LED: 850 nm
Wavelength
850 nm: ±30 nm
Spectral width (FWHM)
850 nm: +/- 50 nm (typical)
Output power
850 nm: ≥24 dBm. Max difference between channels
+/-1dB
Power output stability3
≤ ±0.1 dB over 8 hours
Encircled flux
Meets ANSI/TIA-526-14-B, ISO/IEC 14763-3, and IEC
61280-4-1 for 50/125 μm at the source’s optical connector.
Optical connector
MPO interface for 12-fiber, unpinned plugs. Compatible
with 62.5 μm and 50 μm.
22
Datacomtools.com
TM
Modes
Power requirement
Battery life4
Automatic power-off
Low battery warning
Size
Weight
2 kHz modulated, auto wavelength
2 AA alkaline batteries
>30 hours (typical)
10, 20, 30, or 60 minutes (can be disabled by the user)
Low battery icon blinks
5.6 in x 3.2 in x 1.6 in
10.9 oz (309 g)
1. For 850 nm, 0 dBm to -50 dBm. For 1300, 1310, 1550 nm, -5 dBm to -50 dBm
2. Measured power levels ≤0 dBm. Backlight on. Battery life depends on the condition and type of
batteries used. Fluke Networks recommends alkaline batteries
3. 23°C ±2°C, after 10 minutes of warm-up time.
4. Auto wavelength,SCAN ALL, and backlight on. Battery life depends on the condition and type of
batteries used. Fluke Networks recommends alkaline batteries.
Model
Description
MultiFiber Pro Testing Base Kit includes MultiFiber Pro $9995.00
Power Meter, 850 light source, test cords, MPO adapters, MPO OneClick Cleaner, and carrying case
MFTK1400
MultiFiber Pro Testing and Inspection Kit includes
$13995.00
MFTK1200, FT600 FiberInspector Pro with NF370
MPO tip
MFPOWERMETER MultiFiber Pro Optical Power Meter
$5995.00
MFMULTIMODE- MultiFiber Pro Mulitmode 850 nm LED light source
$4995.00
SOURCE
FT600
FiberInspector Pro
$3780.00
NF370
MPO Fiber Inspection Adapter Tip for FT600
$1075.00
TRC-MPO-PP-B
1 m test cord with MPO/MPO, Pinned/Pinned, Type B
$280.00
polarity
TRC-MPO-UP-B
1 m test cord with MPO/MPO, Unpinned/Pinned, Type
$280.00
B polarity
TRC-MPO-UU-B
0.3 m test cord with MPO/MPO, Unpinned/Unpinned,
$280.00
Type B polarity
BKC-MPO-ULC
1 m breakout cord for MPO Unpinned LC connector
$900.00
BKC-MPO-USC
1 m breakout cord for MPO Unpinned SC connector
$900.00
ADP-MPO-B
Type B polarity MPO adapter
$30.00
GLD-MF
1 YR GOLD for MFPOWERMETER/MFMULTIMODE$1212.00
SOURCE
GLD-MFTK
1 YR GOLD for MFTK1200, MFTK1400
$1752.00
NFC-IBC-1.25mm OneClick cleaners for 1.25 mm LC and MU connector
$333.00
and patch cord (5 qty)
NFC-IBC-2.5mm OneClick cleaners for 2.5 mm SC, ST, FC connectors
$333.00
and patch cord (5 qty)
NFC-IBC-MPO
OneClick cleaners for MPO connector (5 qty)
$451.00
NFC-KIT-CASE-E Enhanced Fiber Optic Cleaning Kit Includes (1)
$266.00
OneClick cleaner for 1.25mm connectors, (1) OneClick
cleaner for 2.5mm connectors, (1) OneClick cleaner for
MPO connectors, a solvent pen, a cleaning cube and
a soft case
MFTK1200
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Enhanced Fiber Optic Cleaning Kit
Includes (1) OneClick cleaner for 1.25mm connectors, (1) OneClick cleaner for 2.5mm connectors, (1)
OneClick cleaner for MPO connectors, a solvent pen, a cleaning cube and a soft case
NFC-KIT-CASE-E
Enhanced Fiber Optic Cleaning Kit
$266.00
Fiber QuickMap
Fiber QuickMap is an enterprise fiber troubleshooter that quickly and efficiently locates connections and breaks in multimode fiber. By instantly providing distances to failures such as high loss and high reflectance incidents.
- One-button testing – can be used straight out of the box with no user-setup required
- Six-second test time, eliminating blind troubleshooting that can last hours
- Locate incidents in the channel to provide visibility of any problematic links and connections
- Locate high loss incidents or breaks, the most common causes of multimode fiber failure
- Locate and measure high reflective incidents, which cause poor network performance
FQM-MAIN: Enterprise Fiber Troubleshooter with carrying pouch
FQM-KIT: Fiber QuickMap, SC/SC and SC/LC (50 & 62.5 μm) hybrid test reference cords, and carrying pouch
FTS900: Fiber QuickMap, SC/ LC (50 and 62.5 μm) hybrid test reference cords, VisiFault VFL, and carrying pouch
FTS1000: Fiber QuickMap, SC/SC and SC/LC (50 and 62.5μm) hybrid test reference cords, VisiFault VFL, SimpliFiber Pro
power meter and multimode source, and carrying case
FTS1100: Fiber QuickMap, SC/SC and SC/LC (50 and 62.5μm) hybrid test reference cords VisiFault VFL, SimpliFiber Pro
power meter and multimode source, FT500 FiberInspector Mini video microscope, and carrying case
FQM-MAIN
FQM-KIT
FTS900
FTS1000
FTS1100
NFK1-1SMPLX-SC
NFK1-1SMPLX-LC
NFK1-1SMPLX-ST
NFK2-1SMPLX-SC
NFK2-1SMPLX-LC
NFK2-1SMPLX-ST
Fiber QuickMap
Fiber QuickMap Kit
Fiber QuickMap Kit
Fiber QuickMap Troubleshooter Kit
Fiber QuickMap Troubleshooter Kit
Test cord, 62.5/125 μm, SC/SC, 1m
Test cord, 62.5/125 μm, SC/LC, 1m
Test cord, 62.5/125 μm, SC/ST, 1m
Test cord, 50/125 μm, SC/SC, 1m
Test cord, 50/125 μm, SC/LC, 1m
Test cord, 50/125 μm, SC/ST, 1m
$1999.00
$2399.00
$2649.00
$4249.00
$4249.00
$52.00
$52.00
$52.00
$52.00
$52.00
$52.00
NF-OPRT-SC
NFK1-LAUNCH
NFK1-LAUNCH-FC
NFK1-LAUNCH-LC
NFK1-LAUNCH-ST
NFK2-LAUNCH
NFK2-LAUNCH-FC
NFK2-LAUNCH-LC
NFK2-LAUNCH-ST
NFK2-LAUNCH-E2K
SC Fiber QuickMap port
CABLE KIT, SC/SC, 62.5UM
CABLE KIT, SC/FC, 62.5UM
CABLE KIT, SC/LC, 62.5UM
CABLE KIT, SC/ST, 62.5UM
CABLE KIT, SC/SC, 50UM
CABLE KIT, SC/FC, 50UM
CABLE KIT, SC/LC, 50UM
CABLE KIT, SC/ST, 50UM
CABLE KIT, SC/E2K, 50UM
$82.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
Fiber OneShot Pro
Takes the complexity out of singlemode testing by analyzing links & measuring faults up to 15 miles in less than 5 sec.
- One-button troubleshooting – no lengthy set-up necessary
- Six-second test time – no more blind troubleshooting that can last up to hours
- Locate high loss incidents or breaks – find the most common causes of fiber failure
- Locate reflective incidents – discover causes of bit error rates, a primary source of network performance degradation
- Locate multiple incidents – quickly see potentially problematic connections in the channel
- FIBR-1-SHOTPRO includes meter, SC adapter, 22-language quick reference guide on CD, manual and batteries.
- FIBR-1-KITPRO Includes meter, SC adapter, UPC-UPC 2-meter patch cord, holster, case, 22 language quick reference
guide on CD, manual & batteries
- FIBR-1-KITPRO-VF includes meter, SC adapter, UPC-UPC 2-meter patch cord, holster, case, 22-language quick reference
guide on CD, manual & batteries plus the VisiFault Visual Fault Locator with 2.5 mm universal adapter
- FIBR-1-KITPRO-PM includes meter, SC adapter, UPC-UPC 2-meter patch cord, holster, case, 22-language quick reference
guide on CD, manual & batteries plus SimpliFiber Pro optical power meter and SC adapter
- FIBR-1-KITPRO-VFPM includes meter, SC adapter, UPC-UPC 2-meter patch cord, holster, case, 22-language quick
reference guide on CD, manual & batteries plus the VisiFault Visual Fault Locator w/2.5 mm universal adapter &
SimpliFiber Pro optical power meter & SC adapter
- FQM-KIT includes Fiber QuickMap, SC/SC and SC/LC (50 & 62.5 μm) hybrid test reference cords and carrying pouch
Fiber OneShot PRO only
Fiber OneShot PRO-SC-Kit
Fiber OneShot PRO-SC-Kit w/VisiFault
Fiber OneShot PRO-SC-Kit w/SimpliFiber
Pro
FIBR-1-KITPRO-VFPM Fiber OneShot PRO-SC-Kit w/VisiFault &
SimpliFiber Pro
FQM-KIT
Fiber QuickMap Kit
FIBR-1-SHOTPRO
FIBR-1-KITPRO
FIBR-1-KITPRO-VF
FIBR-1-KITPRO-PM
Major Credit Cards Accepted
$1699.00
$1799.00
$1999.00
$2599.00
$2799.00
$2399.00
Accessories for the Fiber OneShot PRO
FIBR-UPC-CORD-2M 2m UPC-UPC patch cord
NFK3-LAUNCH
Launch fiber, 9/125μm, SC/UPC to SC/
UPC, 130m
NFK3-LAUNCH-ST
Launch fiber, 9/125μm, SC/UPC to ST/
UPC, 130m
NFK3-LAUNCH-LC
Launch fiber, 9/125μm, SC/UPC to LC/
UPC, 130m
NFK3-LAUNCH-FC
Launch fiber, 9/125μm, SC/UPC to FC/
UPC, 130m
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$71.00
$250.00
$250.00
$250.00
$250.00
23
920XC Series OTDR’s
Greenlee’s 920XC series are handheld, full-featured OTDR for cable acceptance testing and
fault locating. The Autotest function automatically chooses the optimal measurement
settings, scans the fiber under test and performs fiber analysis displaying length of fiber and
the loss of each event in an easy-to-read table. Also available is the graphical user interface
to navigate the trace signature for more detailed views of specific fiber events.
The 920XC series OTDR is indispensable and the ideal tool that all premise technicians
and LAN/WAN contractors need in their toolbox. The 920XC-20M series handheld OTDR is
designed for enhanced user convenience with its large color LCD display and graphical user
interface. The user can activate the measurements function easily by the press of one button.
920XC-20M Features
- Economical, Compact handheld design
- Fast automated testing
- Up to 22db dynamic range
- Large backlight LCD display
- Measure length and defects of coiled fiber
- Fiber analysis software for data management
and report generation
- RS-232/USB interface10~ NiMH batteries for 8
hours continuous use
SingleMode
Multi
920XC-SM-MM
920XC-20M PC FC
920XC-20M PC SC
920XC-20M PC ST
920XC-20C UPC SC
920XC-20C UPC FC
920XC-20C UPC ST
920XC-20C APC SC
920XC-20C APC FC
920XC-30P UPC SC
920XC-30P UPC FC
920XC-30P UPC ST
920XC-30P APC SC
920XC-30P APC FC
920XC-30F UPC SC
920XC-30F UPC FC
920XC-30F UPC ST
920XC-30F APC SC
920XC-30F APC FC
Single and Multi-Mode OTDR Kit
Handheld OTDR, 850/1300nm, FC/PC
Handheld OTDR, 850/1300nm, SC/PC
Handheld OTDR, 850/1300nm, ST/PC
Handheld OTDR, 1310/1550nm, SC/UPC
Handheld OTDR, 1310/1550nm, FC/UPC
Handheld OTDR, 1310/1550nm, ST/UPC
Handheld OTDR, 1310/1550nm, SC/APC
Handheld OTDR, 1310/1550nm, FC/APC
Handheld OTDR, 1310/1490/1550nm, SC/UPC
Handheld OTDR, 1310/1490/1550nm, FC/UPC
Handheld OTDR, 1310/1490/1550nm, ST/UPC
Handheld OTDR, 1310/1490/1550nm, SC/APC
Handheld OTDR, 1310/1490/1550nm, FC/APC
Handheld OTDR, 1310/1550/1625nm, SC/UPC
Handheld OTDR, 1310/1550/1625nm, FC/UPC
Handheld OTDR, 1310/1550/1625nm, ST/UPC
Handheld OTDR, 1310/1550/1625nm, SC/APC
Handheld OTDR, 1310/1550/1625nm, FC/APC
$8740.00
$4369.85
$4369.85
$4369.85
$4475.00
$4475.00
$4475.00
$4475.00
$4475.00
$5615.00
$5615.00
$5615.00
$5615.00
$5615.00
$6815.00
$6815.00
$6815.00
$6815.00
$6815.00
Multimode Model
920XC-20M
Wavelength (± 20nm)
850
1300
Dynamic Range (dB)
18
22
Event Deadzone (m)
7
Attenuation Deadzone (m)
20
Emitter Type
LED
Pulsewidth
12/30/100/275/1us
30/100/275/1us/2us
Selectable Ranges (km)
0.1/0.3/0.5/1.3/2.5/5/10 0.1/0.3/0.5/1.3/2.5/5/10/20/40/80
Average Time
15s/30s/1min/2min/3min
Distance Measurement Accuracy
±(1m + 5 X 105 x distance + sampling space)
Connector Type
PC (interchangeable FC, SC, ST)
Fiber Analysis Software
Reflection Detect Accuracy
±4 dB
Attenuation Detect Accuracy
±0.05 dB/dB
Measurement Data Storage
1,000 test curves
Data Transmission
RS-232/USB port
General
Power Supply
NiMH chargeable battery/AC adapter
Battery Life
Support over 8 hrs operating on one charge or over 20 hrs standby
Operating Temperature
-10° to 50° C
Storage Temperature
-20° to 60° C
Relative Humidity
0 to 95% (non-condensing)
Weight
1.9 lbs. (0.87 kg)
Dimensions
7.7” H x 3.9” W x 2.4” L (196mm x 100mm x 64mm)
All other 902XC’s feature
- Up to 38db dynamic range
- Large backlight LCD display
- Measure length and defects of coiled fiber
- Fiber analysis software for data
management and report generation
- 1625 nm operation for live fiber testing
- RS-232/USB interface
920XC OTDR Contains:
Instrument including rechargeable battery, OTDR Trace Viewer software,
installation disk, Data transfer cable, AC adapter, protective cover, carrying
case, warranty card, CE/ FCC certificate, certificate of calibration. Default
language is English and Spanish.
Accessories
AC-ADPT-20-UNI
AC-CONN-FC-L2
AC-CONN-SC-L2
AC-CONN-ST-L2
920XC-QR
Universal Power Supply
FC Connector (For UPC & APC)
SC Connector (For UPC & APC)
ST Connector (For UPC Only)
920XC Quick Reference Guide
$95.35
$110.00
$110.00
$110.00
$13.55
Singlemode Model
920XC-20C
920XC-30F
920XC-30P
Wavelength (± 20nm)
1310/1550
1310/1550/1625 1310/1490/1550
Dynamic Range (dB)
35
38
38
Event Deadzone (m)
2.5
1.5
2.5
Attenuation Deadzone (m)
14
10
14
Emitter Type
Laser
Pulsewidth
5, 10, 30, 100, 30, 1us, 2.5us, 10us, 20us
Selectable Ranges (km)
0.3/1.3/2.5/5/10/20/40/80/120/160/240
Average Time
15s/30s/1 min/2 min/3 min
Distance Measurement Accuracy
±(1m + 5 X 105 x distance + sampling space)
Connector Type
PC or APC (interchangeable FC, SC, ST
Visual Fault Locator
Wavelength
650nm
N/A
Peak power output
3mw
N/A
Connector interface
(interchangeable FC, SC, ST)
N/A
Fiber Analysis Software
Reflection Detect Accuracy
±4 dB
Attenuation Detect Accuracy
±0.05dB/dB
Measurement Data Storage
1,000 test curves
Data Transmission
RS-232/USB port
General
Power Supply
NiMH chargeable battery/AC adapter
Battery Life
Support over 8 hrs operating on one charge or over 20 hrs standby
Operating Temperature
-10° to 50° C
Storage Temperature
-20° to 60° C
Relative Humidity
0 to 95% (non-condensing)
Weight
1.9 lbs. (0.87 kg)
Dimensions
7.7” H x 3.9” W x 2.4” L (196mm x 100mm x 64mm)
Fiber Optic Patch Cords
10GB Fiber Optic Patch Cords
62.5/125µm Fiber Optic Patch Cords
50/125µm Fiber Optic Patch Cords
LC Fiber End
ST Fiber End
SC Fiber End
Call for quotes on custom fiber assemblies
24
Datacomtools.com
TM
10G
1 Meter
3 Meters
5 Meters
10 Meters
62.5/125
1 Meter
3 Meters
5 Meters
10 Meters
62.5/125
1 Meter
3 Meters
5 Meters
10 Meters
50/125
1 Meter
3 Meters
5 Meters
10 Meters
SC-SC Connector
SCSC10G-1M $22.40
SCSC10G-3M $26.25
SCSC10G-5M $30.35
SCSC10G-10M $40.30
ST-ST Connector
STST6-1M
$17.95
STST6-3M
$20.00
STST6-5M
$22.25
STST6-10M
$27.75
SC-LC Connector
SCLC6-1M
$21.25
SCLC6-3M
$23.55
SCLC6-5M
$25.80
SCLC6-10M
$31.50
ST-ST Connector
STST5-1M
$17.95
STST5-3M
$20.00
STST5-5M
$22.25
STST5-10M
$27.75
SC-LC Connector
SCLC10G-1M $25.25
SCLC10G-3M $29.85
SCLC10G-5M $34.35
SCLC10G-10M $45.75
ST-SC Connector
STSC6-1M
$19.25
STSC6-3M
$21.25
STSC6-5M
$23.50
STSC6-10M
$28.75
LC-LC Connector
LCLC6-1M
$22.85
LCLC6-3M
$25.15
LCLC6-5M
$27.75
LCLC6-10M
$33.75
SC-SC Connector
SCSC5-1M
$20.25
SCSC5-3M
$22.40
SCSC5-5M
$24.55
SCSC5-10M
$29.90
LC-LC Connector
LCLC10G-1M $25.45
LCLC10G-3M $30.00
LCLC105-5M $34.55
LCLC10G-10M $45.95
SC-SC Connector
SCSC6-1M
$20.25
SCSC6-3M
$22.40
SCSC6-5M
$24.50
SCSC6-10M
$29.90
ST-LC Connector
STLC6-1M
$20.25
STLC6-3M
$22.55
STLC6-5M
$24.85
STLC6-10M
$30.45
LC-LC Connector
LCLC5-1M
$22.85
LCLC5-3M
$25.25
LCLC5-5M
$27.69
LCLC5-10M
$33.75
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
SignaMax Media Converters
CONNECTIVITY SYSTEMS
Media Converters from Signamax are an easy and cost-effective way to establish a fiber optic cabling
infrastructure within your existing network. Signamax provides a wide array of converters to support your
Ethernet, Fast Ethernet, and Gigabit Ethernet requirements. For media conversion that can work within
an existing Network Control Center, Signamax has rack mountable and chassis-based converter systems
to support clustered installations, and stand-alone managed converters to handle dispatch to outlying
locations and Fiber to the Home (FTTH) environments. Our series of unmanaged converters provides
simplicity with Link Fault Signaling, to allow managed switches to reroute when a path fails, and the
ability to force speed and/or duplex modes to work where less flexible converters cannot. If small size is
a key requirement, our 10/100 to 100FX mini media converters provide high quality and small size at a
fair price.
How do media converters work?
10/100BaseT/TX to 100BaseFX Media Converter ST Multimode, 2 km Span
10/100BaseT/TX to 100BaseFX Media Converter SC Multimode, 2 km Span
10/100BaseT/TX to 100BaseFX Media Converter LC Multimode, 2 km Span
10/100BaseT/TX to 100BaseFX Media Converter SC Singlemode, 15 km Span
10/100/1000BaseT/TX to 1000BaseSX Media Converter SC Multimode, 220m
Span on 62.5µm Fiber / 550m Span on 50µm Fiber
065-1185 16-Bay Rack Mount Media Converter Chassis
065-1100
065-1110
065-1174
065-1120
065-1196
$110.00
$110.00
$189.00
$265.00
$520.00
Ethernet
Fiber Ports*
Ethernet
Fiber Ports*
$525.00
Span of fiber cable
*Appearance may change depending on fiber adapter conversion. SC Multimode adapters shown
100BaseFX Singlemode To Multimode Converters
Signamax Connectivity Systems’ 100BaseFX Singlemode to Multimode Converters provide efficient
solutions for interconnecting multimode fiber LANs over longer distances by integrating singlemode fiber
optic cable into the LAN. They also enable Ethernet LAN and WAN connectivity, by providing a multimode
interface to singlemode fiber carrier demarcation points. Each Media Converter is enclosed in a compact,
strong metal case and includes an external power supply for stand-alone applications. They can also
be installed without modification in the Signamax 065-1185 Rack Mount Chassis system, featuring
redundant power supplies for high reliability in multiple converter installations.
- LEDs Monitor Network Status
- Sturdy Metal Enclosure
065-1130
065-1130ED
065-1132
065-1132ED
- Singlemode Spans up to 75 Km
- Wall or Chassis-Mountable
100FX SM/SC, 15km to MM/ST, 2km Converter
100FX SM/SC, 40km to MM/ST, 2km Converter
100FX, SM/SC, 15km to MM/SC, 2km Converter
100FX SM/SC, 40km to MM/SC, 2km Converter
- IEEE 802.3u Compliant
- Lifetime Performance Warranty
$435.00
$555.00
$435.00
$555.00
Gigabit Ethernet Media Converters
Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make it simple to extend distances
over multimode or singlemode fiber. They are designed to expand the scope of your Gigabit Ethernet
network applications and are 100% compliant with Ethernet IEEE 802.3ab and 802.3z specifications.
These converters maintain the same form factor as other Signamax media converters, allowing use in the
065-1185 16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic converters for both multimode
and singlemode fiber, multimode to singlemode converters, and singlemode to singlemode extenders are
available. In addition, the 065-1195SFP model utilizes Small Form-factor Pluggable (SFP) modules for the
1000Base fiber connection, for maximum flexibility of use in changing network architectures.
- IEEE 802.3z & 802.3ab Compliant.
- FCC Class A & CE Approved.
- Converts Twisted-Pair to Fiber or
- Performance Warranty.
SM Fiber to MM Fiber at GB Speed. - 065-1195SFP Model Supports SFP
Modules for Flexible 1000Base Fiber.
- Auto-MDIX for Twisted-Pair.
- Rack Mount or Standalone Operation.
- LEDs for Functions & Activity.
065-1194
065-1194ED
065-1195
065-1195SFP
065-1197ED
065-1198XLD
100SX TO 1000LX MM/SC to SM/SC, 10km
1000SX to 1000LX MM/SC to SM/SC, 20km
1000T to 1000SX MM/SC, 220m 62.5µ/550m 50µ
1000T to 1000Base SFP Converter
1000T to 1000LX SM/SC, 20km Converter
1000LX to 1000LX SM/SC, 20km Repeater
Major Credit Cards Accepted
$865.00
$990.00
$290.00
$159.00
$695.00
$1919.00
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
25
Chemtronics
Fiber Optic Cleaning Kits
CFK-1010
CFK-1000
The fiber optic kit for installation and maintenance, ITW Chemtronics has included only the cleaning
supplies necessary for making a successful 2.5mm fiber optic connection. Electro-Wash PX precision
fiber optic cleaner and QbE cleaning system are included for performing the CCp. Swabs are also
included for cleaning ferrules, alignment sleeves and backplace connections. Electro-Wash MX
premoistened wipes are included for tool and cable wiping. The swabs are packaged in rugged tubes
for field operations. They are equipped with a carabineer to clip on a tool belt for transport or to clip a
cable for convenient access.
Kits include:
- QbE cleaning system (200 sheets)
- Electro-Wash PX cleaner
- 2.5mm foam swabs (50 swabs)
- Lint-free wipes (100 4”x4” wipes)
- Electro-Wash MX premoistened wipes (5)
CFK1000
CFK1010
- Instructions
- Rugged bag with carabineer attachment
CFK1000 also includes:
- V-groove and ferrule cleaning swabs (50 swabs)
- Fusion splice mirror cleaning swabs (15 swabs)
FTTH Fiber Optic Cleaning Kit
I&M Fiber Optic Cleaning Kit
$115.00
$89.00
Fiber Optic Cleaning Kits
By using the specially formulated solvent, all contaminants are dissolved, static charge is neutralized
and particles are lifted without scratching the end-face. The customized wipers and swabs are used
to deliver the solvent to the end-face, entrap microscopic debris and absorb dissolved contaminants.
NFC-Kit-Case kit includes:
- Cleaning cube with wipes
- Ten cards with sealed cleaning zones
- Solvent pen
- 2.5mm port cleaning swabs
- 1.25mm port cleaning swabs
- Rugged carrying case
NFC-Kit-Case
NFC-Kit-Box
NFC-Kit-Box kit includes:
- Cleaning cube with wipes
- Five cards with sealed cleaning zones
- Solvent pen
- 2.5mm port cleaning swabs
Cleaning Sticks Biconic/MPO
Cleaning Stick 1.6 & 2.0mm connectors
$190.00
$86.00
Fiber Optic Cleaning Kits
Engineered specifically for removing microscopic particulate and oils from optical devices, the
FiberCare family of optical cleaners deliver excellent value and performance. These products can be
used on any optical device, photonics system or component.
Kit contains:
1 – Can Fiber Prep Fluid
1 – Can of Fiber Connector Cleaner
2 – Mini-tubs FiberWipes (180 total)
MCC-FK03
Solvent Pen
NFC-SolventPen
26
Fiber Optic Cleaning Kit
Cleaning Zone Cards
- Contents: 12 cleaning zones
- Dimensions: 3.75” x 2” x 0.1”
- Material: Lint-free 55%
cellulose/45% polyester
- Contents: 9g or fiber
optic solvent
- Felt-tip, spring-activated
valve in aluminum pen body
- Dimensions: 5.5” x 0.5” dia
Solvent pen
Datacomtools.com
$10.00
TM
25 – FiberAide Wipes
20 – 1.25mm Cleaning Sticks (LC, MU)
30 – 2.5mm Cleaning Sticks (ST, FC, SC)
1 – Port cleaning instruction sheet
NFC CARDS-5PACK 5 Cards with sealed $22.00
cleaning zones
$95.00
Cleaning Cube
- Contents: 125 wipes – each
cleans up to 4 end-faces
- Dimensions: 2” x 2” x 2”
- Material: Lint-free 55%
cellulose/45% polyester
NFC CUBE
Cleaning cube with wipers
$38.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
®
AFL Telecommunications
A Fujikura Business
MPO Cleaner
The MPO Cleaner is a high-performance
device designed for cleaning the ferrule
end-faces of MPO connectors. This tool
cleans the fiber endface without the use of
alcohol. It saves time by effectively cleaning
all 12 fibers at once. The MPO connector
cleaner is designed to clean both exposed
jumper ends and connectors in adapters.
CS000710
Connector Cleaning System
- Special lint-free fabric-on-a-reel quickly cleans
ferrule endfaces of dust, oil, & contaminants.
- Cleaning system is self-contained.
- No need for alcohol.
- Single reel can be used for over 400 ferrules.
MPO Cleaner
$84.00
The USConec IBC Brand Cleaners for multifiber
connections are the first dry cloth cleaners specially
designed to clean MT ferrule based connectors placed
in an adapter, faceplate or bulkhead. This family of
cleaners will clean both male and female MT ferrules.
The US Conec IBC Brand Cleaner are dry
cloth cleaners specially designed to clean
single fiber connectors residing in an adapter,
faceplate or bulkhead. The dust cap of the
cleaner acts as an adapter for cleaning
unmated connectors.
The US Conec IBC Brand Cleaners for multifiber
connections are simple to use and highly effective
at removing oil and dust contaminants that can
negatively impact optical performance.
- IBC Brand Cleaner SC for 2.5mm connectors designed for SC, ST, and FC
for UPC & APC polishes
- IBC Brand Cleaner LC for 1.25mm connectors Designed for standard LC, LC
secure key and MU for UPC & APC polishes
- IBC Brand Cleaner HC for Hardened connectors
- Designed for OptiTap compatible connector systems
- IBC Brand Cleaner for MPO style connectors
- Cleaning cloth made from high density woven micro fibers
- Adapter tip is supplied for cleaning unmated MPO style connectors
IBC Brand Cleaner MPO
$80.00
The OPTIPOP R is a cassette style fiber optic
connector cleaner system that can be refilled
for reducing cleaning costs. It uses a woven
micro-fiber cleaning fabric to remove harmful
contaminates off of the ferrule end face.
The cassette cleaners will accommodate
all single fiber connections. The OPTIPOP R
cleaners will accommodate the alignment guide pins
on male MT ferrules.
The NEOCLEAN R is easy to use and works by simply turning the cleaning
wheel to expose a new section of cleaning cloth and swiping the connector.
6338
6339
6437
8057
6340
6232
The NEOCLEAN R provides 200+ cleanings per cassette. Cleaning cloth is
made from highly dense woven fiber to reduce fraying during use.
8505 Cassette Cleaner LC, SC, FC, ST, MU, (F) MT connectors
8504 Cassette Cleaner OptiTap - compatible connection system
ES810
$42.35
$42.35
QbE® Cleaning System
QBE
Major Credit Cards Accepted
OPTIPOP R cassette cleaner - Single Slot.
OPTIPOP R cassette cleaner - MPO Male.
OPTIPOP R cassette cleaner - Two Slot.
OPTIPOP R cassette cleaner - FTTX
OPTIPOP R cassette cleaner - MTRJ Male
OPTIPOP refill 6 pack.
Presaturated Wipe
- Complete Fiber Optic Cleaning
System – No refills to buy
or investment in expensive
mechanisms to maintain
$9.95
$70.00
$70.00
$70.00
OPTIPOP R Refillable Cassette Cleaners
The disposable cassette cleaner that is
palm sized, light weight and easy to use
for cleaning fiber optic connector end
faces. This cassette cleaning package
offers an economical, all-dry cleaning
solution. The sealed container prevents cloth
contamination from external debris.
- Cleans end-faces/connectors
- One-step buffer gel removal
- Cleans a range of oil & soils
- Use w/QbE Cleaning System
or Econowipes™ wiper
IBC Brand Cleaner SC
IBC Brand Cleaner LC
IBC Brand Cleaner HC
9392
9393
9394
NEOCLEAN R Cassette Cleaner
Fiber Optics Cleaner
$109.95
IBC Cleaning Tools
IBC Brand Cleaner for MPO Style Connectors
7104
Connector Cleaning System
948
$38.95
IPA Presaturated Wipes
- Cleans all soil types, removes
organic and ionic soils
- Moderate evaporation rate
increases cleaning power
- Leaves no residue
CP421
$42.85
$87.00
$87.00
$87.00
$87.00
$90.00
$150.00
Chemtronics
- Features ultra pure mixture
of 70% IPA and 30%
deionized water
- Features ultra
pure mixture of
70% IPA and 30%
deionized water
or 91% IPA and
9% deionized
water
SIP100P
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$23.95
27
®
Cable IQ Qualification Tester
CableIQ is the first qualification tool designed for network technicians who need to troubleshoot connectivity
problems and qualify cabling bandwidth. It sees if your cabling is qualified to support 10/100, VoIP or
Gigabit Ethernet. Detects speed/duplex settings of attached switches and PCs. Intelligent wiremap
graphically shows distance to faults. Intuitive, lightweight, and rugged.
- Sees if your existing cabling can support voice, VoIP, 10/100/Gigabit Ethernet
- Troubleshoots why existing cabling plant can’t support the desired network bandwidth
- Discovers what’s at the end of any cable and switch displays device configuration (speed/duplex/pairing)
- Frees-up switch ports and identifies unused links
- Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap
- Tests all copper cabling media: twisted-pair, coax, and audio cabling
- Locates and traces cable with IntelliTone™ digital signaling technology
CIQ-VOIP
CIQ-GSV
CIQ-SVC
CIQ-KIT
CIQ-FTKSFP
CIQ-100
CIQ-KIT
CIQ-SVC
CIQ-VOIP
VoIP Enterprise Service Kit
CableIQ Gigabit Service Kit
CableIQ Service Kit
CableIQ Advanced IT Kit
Copper and Fiber Technician’s Kit
CableIQ Qualification Tester
Accessories for the CableIQ Qualification Tester
CIQ-CIT
CableIQ IT Hard Carrying Case
CIQ-COAX
CableIQ Coax Adapter Kit includes F-connector, BNC and RCA connectors
CIQ-IDK24
CableIQ Remote Identifier Kit includes remote identifier numbers 2-4
CIQ-IDK57
CableIQ Remote Identifier Kit includes remote identifier numbers 5-7
CIQ-RJA
RJ45/11 Modular Adapter
CIQ-SPKR
CableIQ Speaker Wire Adapter
CIQ-WM
CableIQ Main Wiremap Adapter (replacement part for lost or damaged unit)
CLIP-SET
Clip Set includes RJ45 to 8-clip test lead
MT-8200-53A IntelliTone 100 Probe Includes: IntelliTone 100 Probe, lanyard, owners CD
and quick start guide, and 9 volt battery
MT-8200-63A IntelliTone 200 Probe Includes: IntelliTone 200 Probe, RJ11 and RJ 45 patch
cables, lanyard, owners CD and quick start guide, and 9 volt battery
Support
GLD-CIQ
Gold Support for CableIQ (any model), 1 year
CIQ-GSV
CIQ-FTKSFP
$4235.00
$2755.00
$2253.00
$1855.00
$3705.00
$1160.00
$88.00
$22.00
$26.00
$260.00
$50.00
$61.00
$110.00
$49.00
$100.00
$132.00
$155.00
AirCheck WiFi Tester
AirCheck allows users to quickly verify and troubleshoot 802.11 a/b/g/n network availability, connectivity,
and security all in a dedicated, handheld tool. Its intuitive interface allows you to quickly see wireless network
usage and easily determine if it’s Wi-Fi traffic or non-Wi-Fi interference, plus identify and locate wireless APs
whether authorized or rogue.
- Dedicated, handheld 802.11 a/b/g/n tester with instant-on technology
- Fully supports 2.4 and 5.0GHz frequency bands
- Rapidly perform a Wi-Fi discovery to fully assess your current wireless security settings & network availability
- See what’s using your Wi-Fi network by channel & determine if it is 802.11 traffic or non-802.11 interference.
- Robust and in-depth WLAN connection tests - from probing to DHCP request to ping
- Quickly identify and locate access points whether authorized or rogue
- Fully documents your troubleshooting session – enabling fast trouble ticket resolution or problem escalation
AIRCHECK: Includes: AirCheck, USB cable, soft case, guide, & CD w/AirCheck manager software & manual
AIRCHECK
ES2-PRO-SX/I-ACK
ES2-PRO-SXI-LR-ACK
AIRCHECK/GLDES
AirCheck Wi-Fi Tester
EtherScope S2 LAN WLAN SX Fiber ITO + AirCheck
EtherScope S2 LAN WLAN SC Fiber ITO + LRPRO + AirCheck-Kit
AirCheck Wi-Fi Tester for EtherScope Gold Owners
$1925.00
$10695.00
$12495.00
$1795.00
ACK-LRPRO
ES2-PRO-SX/I-ACK
28
ES2-PRO-SXI-LR-ACK
Datacomtools.com
TM
Accessories for the AirCheck Wi-Fi Tester
EXTANT-RPSMA
External Directional Antenna, RSMA Connector
WBP-LION
AirCheck Lithium Ion Replacement Battery
POE-DETECTOR
Power over Ethernet Detector, 802.3AT
MS-AUTO-CH
Auto Charger
DTX-ACUN
AC Charger, Universal
Support
GLD-ACK
AirCheck Gold Support Services 1 yr
$245.00
$275.00
$80.00
$49.00
$57.00
$260.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
DTX CableAnalyzer Series
Category 6 Cable Analyzers are Three times faster than existing testers with 9-second Cat 6 Autotest.
It all starts with 9-second Cat 6 Auto test that means you can meet TIA-568-B certification requirements and
receive structured cabling warranties much faster than ever before. With all this speed also comes increased
accuracy. The DTX is the only independently verified TIA Accuracy Level IV tester to obtain UL accuracy
classification. And, you’ll be prepared for emerging new cabling technologies such as 10Gig Ethernet thanks
to DTX’s 900MHz frequency range. You’re ready for whatever the world throws at you - today and tomorrow.
- Exceeds spec requirements for Cat 5e/6 and Class E/D/F
- Independently verified by UL to meet ISO Level IV and proposed TIA Level IIIe Accuracy requirements
- Advanced time-saving diagnostics pinpoints fault and suggests corrective actions
- 900MHz future-proofs your investment for future applications such as 10 Gigabit Ethernet, Class F and CATV
- Resident fiber modules lets you switch between copper and fiber with the push of a button
- DTX significantly reduces total certification costs by as much as 33% a year
Advanced Diagnostics
The directions not only tell you the problem, but also identify corrective actions your test technicians can take
to solve the problem quickly — all without having to consult with the project manager. Instead of spending
time executing trial and error corrections — and re-testing to find out whether the problem has been resolved
— the technician knows exactly where to look and what to do to fix the failing link.
Accessories for DTX CableAnalyzer Series
DTX-HCSE
Hard Carrying Case - DTX Series
DTX-TSET
Headset for DSP and DTX Cable Analyzers
DTX-ACUN
AC Charger, Universal
DTX-ACNA
AC Charger, North America
DTX-CASE
Standard Carrying Case-DTX Series
DTX-STRP
DTX Carrying Strap
DTX-USB
USB Interface Cable (Mini-B)
DTX-SER
Serial RS-232 Cable (DB-9 to IEEE 1394)
DTX-LION
Lithium Ion Battery Pack
Fiber Modules and Accessories (Continued)
NFK3-LAUNCH-ST SC/ST LAUNCH FIBER SM
NFK2-LAUNCH-E2K SC/E2000 LAUNCH FIBER 50µm
NFK2-LAUNCH-FC SC/FC LAUNCH FIBER 50µm
NFK2-LAUNCH-LC SC/LC LAUNCH FIBER 50µm
NFK2-LAUNCH-ST SC/ST LAUNCH FIBER 50µm
NFK2-LAUNCH-SC SC/SC LAUNCH FIBER 50µm
NFK1-LAUNCH-FC SC/FC LAUNCH FIBER 62.5µm
NFK1-LAUNCH-LC SC/LC LAUNCH FIBER 62.5µm
NFK1-LAUNCH-ST SC/ST LAUNCH FIBER 62.5µm
NFK1-LAUNCH
SC/SC LAUNCH FIBER 62.5µm
DTX-MFM2
MM Fiber Modules - Includes (2) modules
DTX-GFM2
DTX Gigabit Multimode Fiber Modules
DTX-SFM2
SM Fiber Modules - Includes two modules
NFA-SC
(2) SC Adapters for DTX-xFM2 power meter
NFA-LC
(2) LC Adapters for DTX-xFM2 power meter
NFA-ST
(2) ST Adapters for DTX-xFM2 power meter
NFA-FC
FC Test Adapters, Set of two
NFK1-DPLX-SC
Duplex MM 62.5 μm TRC for SC Adapter, (2)
NFK1-DPLX-LC
Duplex MM 62.5 µm TRC for LC Adapter, (2)
NFK1-DPLX-ST
Duplex MM 62.5 µm TRC for ST Adapter, (2)
$700.00
$31.00
$57.00
$34.00
$230.00
$20.00
$31.00
$40.00
$300.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$250.00
$5035.00
$5755.00
$7020.00
$210.00
$210.00
$120.00
$210.00
$210.00
$210.00
$210.00
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DTX-1200-MS
•
DTX-1200-M
DTX-QUAD-OTDR
•
DTX-1800-MSO
$9900.00
$8600.00
$20600.00
$14000.00
$30835.00
$11425.00
$13400.00
$20000.00
•
•
DTX-1800-M
DTX-1800 CableAnalyzer
DTX-1200 CableAnalyzer
DTX-1800 w/MM & SM Modules
DTX-1800 w/MM Fiber Modules
DTX-1800 Copper/Fiber/OTDR Kit
DTX-1800 Compact OTDR Kit
DTX-1200 w/MM Fiber Modules
DTX-1200 w/MM & SM Modules
•
DTX-1800-MS
DTX-1800
DTX-1200
DTX-1800-MS
DTX-1800-M
DTX-1800-MSO
DTX-QUAD-OTDR
DTX-1200-M
DTX-1200-MS
Features
DTX-1800
DTX-1200
Smart Remote
DTX-MFM2 MM Fiber Modules
DTX-SFM2 SM Fiber Modules
DTX Compact OTDR Module
Launch Fibers
Fiber Inspector Mini
Fiber Optic Cleaning Kit
128MB MMC Card
Serial RS-232 Cable
DTX-1200
All DTX-1800 & DTX-1200 CableAnalyzers Include:
- AC Chargers (2)
- LinkWare PC Software
- Carrying Case
- CAT 6A Permanent Link Adapters (2)
- USB Interface Cable (Mini-B)
- Cat 6/Class E Channel Adapter (2)
- Users Manual
- Headsets (2)
DTX-1800
Level IV Accuracy
Until now, testers have been designed to meet accuracy Level III. The more demanding accuracy Level IV
specification has been proposed in ISO/IEC (international standards) to test Class F links to 600 MHz. DTX
testers exceed this specification, assuring you of higher confidence in results over the full frequency range.
•
•
•
•
•
Copper Adapter and Accessories
DTX-10GKIT
Alien Crosstalk Analyzer Kit for DTX-1800: (2)
modules, Windows AxTalk Analyzer™ Software, 2
Cat 6A/Class EA Permanent Link Adapters, two
Channel Adapters for Alien Crosstalk.
DTX-AXKIT
Alien Crosstalk Analyzer Kit for DTX-1800: (2)
modules, Windows AxTalk Software, (2) Terminators (Common & Differential) & 2 8-pin Couplers.
DTX-NSM
The DTX Network Module
DTX-COAX
DTX Coax Cable Test Adapter (2 adapters
included)
DSP-PCI-C6JACK Replacement Cat 6 Jacks for the DSP-PCI-C6
Patch Cord Adapter, set of 10
DTX-PLA002S
Set of 2 Permanent Link Adapters for Cat6A and
Alien Crosstalk testing.
DTX-PLA002
One Permanent Link Adapter for Cat 6A and Alien
Cross Talk testing.
DTX-PLCAL
Permanent Link Adapter Field Calibration module.
DTX-PLA002PRP DTX-PLA002 plug replacement parts.
DTX-PLA001S
Set of 2 Permanent Link Adapters with PM06
Personality Modules.
DTX-PLA001
Permanent Link Adapter
DTX-TERA
TERA Adapter Kit - Channel Adapters (2) &
Permanent Link Adapters (2)
DTX-PLA011
TERA Permanent Link Adapter for TERA Class F
and Fa Systems.
DTX-CHA011
TERA Channel Adapter for TERA Class F Systems
DTX-CHA002S
(2) Cat 6/Class E Channel Adapters for Alien
Crosstalk measurements.
DTX-CHA002
Cat 6/Class E Channel Adapter optimized for
Alien Crosstalk measurements.
$3000.00
$1800.00
$1200.00
$700.00
$1200.00
$1000.00
$600.00
$250.00
$70.00
$1000.00
$600.00
$1300.00
$500.00
$250.00
$300.00
$150.00
More Accessories for the DTX CableAnalyzer Series are Available at www.datacomtools.com
Major Credit Cards Accepted
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
29
LinkRunner Network Multimeter
As networks run faster and become more complex, infrastructure cabling and devices must operate to precise
levels in a tighter performance window. As a result, nearly 80% of network problems stem from simple wiring and
connection problems. Front-line technicians are the first line of defense against problems in the physical and
link layers of the network. LinkRunner improves your troubleshooting and escalation accuracy by helping you to
quickly identify if a problem is the network or the PC NIC.
Easy to use and affordable
LinkRunner is so easy to use, even the most inexperienced technician can be up to speed and using it in a matter
of minutes. The ease of use and affordable pricing of this personal, pocket-sized tool (weight: 4.5 oz/128 g),
makes LinkRunner a must-have for every front-line network technician - dramatically increasing your productivity
while escalating accuracy by determining if the problem is on the network or the PC NIC.
Specifications
Identifies
- 10BASE-T 100BASE-TX
- 100 Base-T (full or half-duplex)
- Gigabit Ethernet
- Token Ring
- Telco
- Cable ID
- Unpowered PC or hub
- Auto-MDIX ports Auto Negotiation or strapped port
10BASE-T and 100BASE-TX
Length, open, short, splits, wiremap, crossed, straight through
RJ-45 LAN, RJ-45 Wiremap
Push-button navigation of icon/menu driven view
- 2 AA standard batteries
- Optional NiMH batteries and battery charger available
- Approximately 20 hours continuous use with 4 hours of pinging.
2.75”w x 3.75”h x 1.25”d 6.98cm x 9.52cm x 3.17cm
4.5 oz/128 grams with batteries installed
One year
Media Access
Cable Tests
Ports
Interface
Power
Linkrunner Kit Includes:
- Cable ID Kit (#1-8)
- Wiremap Adapter
- RJ-45 coupler
- IntelliTone 100 Probe
- Clip Set
- NiMH battery pack
- NiMH battery charger
- Custom Carrying Case
- PC Inspector Software and Key Device
Watch software
Dimensions
Weight
Warranty
Linkrunner
Linkrunner-Kit
Fluke Linkrunner
Fluke LinkRunner Extended Test Kit
$545.00
$995.00
Real World Certifier
Performance, Certify, and Troubleshoot LAN Hardware and Cabling (10MB, 100MB, Gigabit)
The RWC100 takes you far beyond typical LAN and Cable testing. Now you can perform all of your standard
cable tests plus “Type” your cable (CAT 3, 5, 5E, 6) and perform real speed tests on cables, switches, hubs,
and PCs. With results displayed on easy-to-read graphs! Plus, store the test for later printing.
- Speed Tests (10MB, 1000MB, Gigabit):
- Real world Cert Level 1 (Projected)
- Real World Cert Level 2 (Confirmed)
- Cable typing (CAT 3, 5, 5E, 6)
- Displays Port speed, duplex, data level of all pairs
- Inline Port Mode (negotiated results)
- Port beacon (locate port)
- Cable Length (real 1 nanosecond TDR)
- Opens, shorts, split pairs, splits distance
- Next, Next, (far), Skew, Propagation delay
- Attenuation, Hot Splits
- Multi-pair Toner/Probe
- Stores 250 tests for later printing
Benefits:
- Certify & troubleshoot all LAN hardware & cabling.
- Compatible with all 10MB, 100MB, & Gigabit Networks!
- Test existing cables for higher speed compatibility
- Spot faulty wiring closet jumpers from your wall outlet
- Detect worn connectors and faulty terminations.
- Identify excessively noisy cables
- Decode 10/100/GIG PCs, switches & hubs
- Go between 2 LAN devices & identify the speed
- Test 10/100/Gigabit PCs, switches & hubs for signal
- Perform your own inspection on new devices and cables
- Identify network bottlenecks caused by slow links
- Print “Receipt” to document test results
Product Includes:
- RWC1000 Main Unit
- RWC1000 Remote Unit
- Cat5e Patch Cables (2)
- Protective Case (Zippered)
- Documentation Tablet
- “Passed” Stickers (64)
- 9V Battery (2)
- Instructional DVD
- Illustrated Users Manual
- Warranty: 1 year parts and labor
- Made in the U.S.A
RWC1000K
30
Datacomtools.com
TM
Real World Certifier
$430.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
VDV PRO
The VDV PRO Cable Tester is a cable testing and verification device that can test all wiring requirements
throughout today’s residential and commercial environments.
- Network link LED blink for visual cable tracing
- Voice testing capability detects RJ-11 (1, 2, or 3 pair)
- Voice test also shows Normal or Reverse for pins 1 through 6
- Length measurement is shown during initial test results for convenience and time savings
- Eight remotes have RJ-45, RJ-11 and Coax F-jacks for increased testing capabilities
- Tests for shield continuity, shorts, opens, miswires, reversals and split pairs with remote connected
- Full dot-matrix LCD display for user convenience to read display results
- One-ended testing for shorts, opens and split pairs (no remote needed)
- Test results displayed in wire map format with message line for shorts and split pairs
- Will display wire map for 10Base-T and Token Ring with remote connected
- UTP, STP, and Coax length measurement in feet or meters using cable capacitance method
- Coax mapping with up to eight color coded coax remotes.
- Tone generator mode sends four different tones on all conductors, selected pair or selected pin
- Auto-off in any mode and low power consumption for long battery life
- Identifies presence of voltage on cables
33-770
33-771
33-774
33-780
33-775
VDV PRO w/one remote and terminator
VDV PRO w/eight remotes and terminators
VDV PRO Eight Remote Kit (ID 1-8)
VDV Pro w/one remote and probe
Eight Coax Terminator Kit
$289.00
$355.00
$135.75
$280.00
$40.15
VDV MultiMedia Cable Tester
The VDV Multimedia Cable Tester is an easy-to-use cable testing and verification device that can quickly test all wiring
requirements found throughout today’s residential and commercial environments.
The VDV Multimedia Tester makes it a snap to quickly verify wiring integrity and assure proper terminations for diverse
types of networks.
Voice – tests 3-pair USOC and 6-position RJ11/12 jacks for voice cable testing
Data – tests both shielded and unshielded cable testing to T568A/B (RJ45)
Video – tests coax cable for opens and shorts with F-Connector interface
- Comprehensive testing for Voice, Data and Video applications.
- Designed for testing in residential and commercial environments.
- Supports RJ11/12, RJ45, and coax F-Connector cabling and interfaces.
- Easy-to-read LCD display with PASS/Miswire indicators, wiremap display and troubleshooting modes.
- Multi-tone support for cable tracing and fault isolation.
- Convenient internal storage for remote.
- Capacity to support additional remotes
33-856
VDV Multimedia Cable Tester Kit
$105.95
NETcat Pro Structured Wiring Troubleshooter
The NETcat® Pro2 is a digital tool for fast, accurate checking of cables, wiring and network service. Operated using a
back-lit touch screen display, the NETcat® Pro2 tests wiring continuity and proper pair allocation, measures the length
of cables, determines if network service is available and identifies Power over Ethernet (PoE) cables. When used with
the NC-510 Accessory Kit, containing seven (7) expansion remote test modules, the NETcat® Pro2 can uniquely test
coax or twisted pair jacks from a central location eight (8) at a time. Using a fingertip or the built-in stylus, the screen
can be used to control and display a range of tests from fault finding to TDR length measurement. The display can be
set to English, Spanish, French or German language.
TESTS FOR
PoE
- Identifies active network devices on 10/100/1000 Base-T Ethernet (802.3) networks.
- Identifies PoE (source device detection).
- Memo Pad/reminder feature - stored in non-volatile memory.
- Field replaceable “F” type connector.
- NVP cable library allows for 5 commonly used fixed and 5 user selectable cable types - stored in non-volatile memory.
- Graphical touch screen display with contrast adjustment and backlight.
- Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables.
- 0-2,000 foot (600 Meter) cable length via TDR.
- Office identification using remote ID units.
- Troubleshoots and verifies a wide range of networks.
NC-500
NC-510
NETcat pro digital VDV wiring troubleshooter
NETcat pro accessory kit w. carry case and 7 digital remote units
Major Credit Cards Accepted
$290.00
$98.00
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
31
Tone and Probe Kits
Greenlee is proud to introduce fully upgraded versions of its industry standard tone and probe tracing kits.
These kits offer superior tracing for low voltage applications such as telephone, data, and security alarm
wiring. Essential for the internal wiring technician, the tone and probe kits provide the ability to check
voltage on wire pairs as well as generate a tagging tone, which is then picked up by the tracing probe.
Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone
and probe kits promise to provide an enhanced customer experience for tracing and identifying single
conductors or cables within bundles, either at midpoint or at remote ends.
601K-G
The 601K-G Basic Tracing Kit features volume control and external warble-select. The 701K-G Professional
Tone & Probe Tracing Kit takes the functionality a step further, featuring an LED headlight, headset jack,
Short circuit beeper and external warble-select. Finally, the 701K-G/6A Professional Tone and Probe Tracing
Kit has all the features of the 701K-G but incorporates upgraded Telco-Grade angled-bed-of-nails clips for
those larger jobs. Best of all, each tone and probe kit in this new series is backed by a one year warranty.
601K-G features: Tone Probe: 200B-G with adjustable volume control, and replaceable tip. Tone Generator:
77M-G with continuity & polarity LED, external warble select, short circuit LED/beeper: LED, Single/dual line
modular: LED, and alligator/ABN connector clips: Alligator
701K-G
701K-G features: Tone Probe: 200EP-G with adjustable volume control, replaceable tip, LED signal indicator,
test telephone port, headset jack, and LED flashlight. Tone Generator: 77HP-G with continuity & polarity LED,
external warble select, RJ11 & RJ45 socket, lanyard, short circuit LED/beeper LED, single/dual line modular
LED: Dual, and alligator/ABN connector clips: Alligator
701K-G/6A features: Tone Probe 200EP-G with adjustable volume control, replaceable tip, LED signal
indicator, test telephone port, headset jack, and LED flashlight. Tone Generator: 77HP-G/6A with continuity
& Polarity LED, external warble select, RJ11 & RJ45 socket, lanyard, short circuit LED/beeper LED, single/
dual line modular LED: Dual, and alligator/ABN connector clips: ABN
701K-G/6A
601K-G
701K-G
701K-G/6A
Basic Tone and Probe Kit
Professional Tone and Probe Tracing Kit
Tone & Probe Tracing Kit w/ABN Test Clips
$88.10
$109.85
$109.85
Pro 3000 Tone and Probe Kit
The Pro3000 Tone & Probe Kit is the innovative analog tone and probe from Fluke Networks. It’s your best
choice for toning and tracing bare wire on non-active networks. Easily identify individual pairs with its
patented SmartTone™ technology (the five different tones for exact pair identification). Angled-bed-of-nails
clips allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks. The
large powerful speaker on the probe allows you to hear through drywall, wood or other enclosures to find
wires quickly and easily. You can send tone up to ten miles on most cables. Attach the nylon pouch to your
belt, and you will be equipped for any wire identification job.
26000900
Pro 3000 Tone and Probe Kit
$85.00
IntelliTone™ Pro Toner & Probe
The IntelliTone™ Toner and Probe Series from Fluke Networks gives you a digital signal locating technology
that’s as advanced as the systems you work with. Intellitone’s breakthrough solution and the only solution
that locates and isolates hidden or bundled voice, data and video cables quickly and reliably, even on active
networks. With dramatic gains in speed, precision and productivity that make analog tools obsolete.
Intellitone MT-8200 Include:
IntelliTone 200 Toner & Probe
IntelliTone 100 Tone & Probe
IntelliTone 200 Toner
IntelliTone 100 Toner
IntelliTone 200 Probe
IntelliTone 100 Probe
Coax F Connector Adapter
RJ11 patch cables
RJ45 patch cables
Test leads with alligator clips
Lanyards
Owners Cd and quick start guide
9V battery
Price
32
Datacomtools.com
TM
60A
•
61A
63A
50A
•
•
•
•
•
•
•
•
(2)
$132.00
53A
•
•
•
(2)
(2)
•
•
•
(2)
$210.00
51A
•
•
•
•
•
$132.00
•
•
•
•
•
•
(2)
$159.00
•
•
•
•
•
•
•
$100.00
•
•
•
•
$100.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Tracker II
- Traces the path and determines the depth of wires and metallic pipes on active or dead systems without
having to deactivate the system.
- Transmitter output and receiver sensitivity are fully adjustable for maximum accuracy.
- Transmitter offers three methods of connection: direct, inductive coupler, and inductive antenna.
- Includes transmitter assembly, receiver assembly, inductive coupler (clamp), built-in inductive antenna, two
8 ft. (2.4 m) test leads with heavy-duty alligator clips and durable polyethylene case.
- High frequency transmitter provides range up to 4,000 ft. (1,219 m) and depths up to 7 ft. (2 m).
- Receiver is 32 in. long (813 mm).
- Battery operated (eight AA and one 9V battery are included).
- 1 year limited warranty.
501
Tracker II
$690.00
Wire Finder/Mini Locator
For technicians who occasionally need to locate buried or in-wall wiring but don’t require all the bells and
whistles of a high priced cable locator. Compact design doesn’t take up valuable truck space while easy to
understand operations help avoid constantly referring to manuals. The 508S Wire Finder provides reliable
results on buried cables to depths of 3 feet and lengths up to 1000 feet. The unit can even be used to
determine the approximate depth of a wire or cable before you dig. Fully adjustable transmitter output and
receiver gain improve system performance and locating accuracy.
- Determines the approximate depth of a wire before digging begins
- Transmitter and receiver are fully-adjustable for accurate locating
- Reliable results on buried cables to depths of 3’ and lengths up to 1000’
- Quick-change test leads for use in any industry, even international power outlets
- Voltage protection allows use on live AC circuits
- Automatic shutoff prevents accidental battery discharge
508S
Wire Finder/Mini Locator
$280.00
Pulser Fault Locator
Pulser Fault Locator completes your buried cable trouble-shooting tool set, pinpointing the smallest breaks in
buried cable insulation. The transmitter pulses a high-voltage signal that radiates into the earth at fault
locations. With the A-frame mounted receiver, a visual analog meter points the way to the source of the
voltage & identifies faults on a single wire, showing the need to replace instead of repair.
- Portable Transmitter “Pulses” a High Voltage Signal into the Earth at the Location of the Faults.
- With the A-frame Mounted Receiver, a Visual Analog Meter Points the Way to the Source of the Voltage.
- Multiple Faults on a Single Wire can be Identified Indicating the Need to Replace Instead of Repairing.
- Extra Long Test Leads Feature Heavy-Duty Alligator Clips for Use on Multiple Cable Types.
- Includes a Rechargeable Transmitter, Receiver, A-Frame, Ground Stake, 120V AC Charger, 12 Volt DC
(Cigarette Lighter) Adapter, and Complete Operating Instructions.
- Battery-Operated (1) 12V and (1) 9V Included.
- 1-Year Warranty
PE2003
Pulser Fault Locator
$1100.00
Modular Adapters
The Banjo Modular Adapters are designed to permit testing on working lines, and allow circuit access without
disrupting service.
- Sturdy copper contacts are angled to prevent alligator clips from falling off during testing.
- Small holes in each contact allow insertion of test probes.
- All circuits are clearly marked on sides and bottom of the Banjo adapters.
- Banjo Modular Adapters available with 4, 6,and 8 wire (RJ11, RJ45)
- Banjo Modular Adapters available with numbered contacts and no interruption of service design
- High impact plastic design; outside plant resistant Banjo Modular Adapter allows for replace-able line cords
- The Banjo adapter is available in four, six, or eight wire configuration for voice and data applications.
- Heavy duty, molded-in clip for attaching to shirt pocket or tool pouch.
10210100
10220100
10230100
10210101
10220101
10230101
4-Wire Banjo Adapter (in-line)
6 Wire Banjo Adapter (in-line)
8 Wire Banjo Adapter (in-line)
4 Wire Banjo Adapter w/K-plug (in-line)
6 Wire Banjo Adapter w/K-plug (in-line)
8 Wire Banjo Adapter w/K-plug (in-line)
Major Credit Cards Accepted
$24.00
$26.00
$30.00
$28.00
$30.00
$35.00
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
33
Butt Sets
TS52
TS44-PRO
TS®52 PRO Caller ID test
set features the latest in
test set technology.
TS42
TS®40 Series combine ruggedness, and
waterproof durability with powerful testing
capabilities. TS44-PRO includes Data lockout protection & Data lockout override.
TS30
TS52PRO Test Set with angled bed-of-nails cord piercing pin
TS52PRO Test Set with 346A Plug
TS52PRO Test Set with Piercing Pin Clips
TS52PRO Test Set w/angled bed-of-nails cord w/piercing pin & RJ11 plug
TS44 PRO Test Set with piercing pin only
TS44 PRO Test Set with angled bed-of-nails & piercing pin
TS44 PRO Test Set with angled bed-of-nails & RJ11 plug
TS42DLX Test Set with angled bed-of-nails
TS42DLX Test Set with piercing pin clips
52801009
52801004
52801001
52801RJ9
50801001
50801009
50801RJ9
42801009
42801001
TS25
The TS®30 – a rugged
butt-in telephone test
set at an affordable
price.
$414.00
$414.00
$414.00
$432.00
$394.00
$394.00
$410.00
$318.00
$318.00
TS®25D Test Sets
- features data lockout,
lockout override and a
large LCD.
30800009
25501109
22801009
22801001
22800009
19800009
19800003
TS22
TS19
TS®22 Series Test Sets
- combining reliability,
durability and expanded
utility.
The TS®19
features DataSafe,
Tone/Pulse
operation & Talk
capabilities.
TS30 Test Set with angled bed-of-nails clips
TS25D Test Set with angled bed-of-nails kit
TS22A Test Set with angled bed-of-nails clips
TS22A Test Set with piercing pin clips
TS22 Test Set with angled bed-of-nails clips
TS19 Test Set with angled bed-of-nails clips
TS19 Test Set with banana jacks clips
$234.00
$244.00
$332.00
$332.00
$286.00
$114.00
$114.00
Butt Sets
PE930
PE945
Waterproof tested to an IEC
IP67 rating, these test sets
are so impervious to water
they can actually withstand
submersion.
PE961
PE945
PE930
PE961
Waterproof tested to an IEC
IP67 rating, these test sets
are so impervious to water
they can actually withstand
submersion. With hands-free
speakerphone
TM-500
The new PE961 Test Set features
our DigAlert over-voltage alarm and
lock-out function to eliminate the
danger of damaging or knocking
out digital service lines. It also
provides full ADSL compatibility.
Rugged ADSL Compatible Butt Set with 2-way Speakerphone
Greenlee Test Set
Greenlee Test Set
The TM-500 not only works in
handset mode, but can be used
with the headset for easy hands-free
operation. It is safe to operate with
over-voltage & current detection.
$320.00
$290.00
$227.15
Modular Adapter
This modular adapter allows in-line testing
for any plug/jack combination. It includes
two 4-pair jacks plus a 152mm (6 in.)
modular cord terminated with our patented
4-pair “universal” plug for accessing any
standard 6- or 8-position jack. Individual
conductors are broken out by pin number
and correspond to eight separate test pads.
Test equipment can be securely attached to
the test pads using alligator clips.
For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the
MODAPT body. When used with Siemon’s TESTAR® adapter and S110® test adapter, the MODAPT
can be used to test connections on S66M and S110 blocks.
34
TM-500
TM-500T
TM-500i
TM-700
The TM-700 features over-voltage &
over-current detection for safer operation,
intercom mode, a built in toner for pair
tracing, DTMF detection, & measurement
for productivity. Use the loudspeaker or
with a headset for hands free operation.
Test Set w/ABN bed-of-nails Croc Clips (POP)
Test Set w/ABN bed-of-nails Croc Clips (BOXED)
Telephone Test Set w/ Small Croc Clips (BOXED)
Test Set w/ABN bed-of-nails Croc Clips & RJ11 (POS)
$115.00
$115.00
$115.00
$210.00
Tone & Probe Kits
MODAPT
MODAPT
TM-700
Siemon modular adapter
Datacomtools.com
TM
$20.85
When it comes to wire identification
kits, the 801K premium tone and
probe kit is top of the line!
- Designed for more accurate wire identification, the 801K virtually
eliminates power-related noise from the tone and probe operation
- Kit includes the 77HP/6A High Power Tone Generator and 200 FP Filter
Probe in a convenient Cordura case (700C)
801K
Premium Tone and Probe Kit
801K Kit Tone Generators and Probes Also Sold Separately
77HP/6A
Tone Generator
200FP
Multi-Filter Tone Probe
$169.00
$55.00
$115.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Fluke Networks Punchdown Tools
D914S Automatic Impact Tool
SoftTouch D914™S Impact Tool includes a built in probe pic/spudger allowing you to choose from high & low impact settings.
Fluke Networks increases the versatility
and flexibility of its line of impact tools by
offering a wide variety of interchangeable
blades that permit each tool to perform
multiple functions. Fluke Networks has
the blades you need to terminate blocks
and jacks quickly.
10061503
10061501
10061120
10061100
10061110
Fluke Network Replacement Punchdown Blades
10176000 110 replacement blade
10056000 66 replacement blade
10176500 110 Eversharp replacement blade*
10056500 66 Eversharp replacement blade*
10178600 110/66 Eversharp dually replacement blade*
10665000 Bix replacement blade
10565000 Krone replacement blade
10565110 Krone dually replacement blade
10465001 3M system “D” bit replacement blade
10057000 630 replacement blade
10436001 Center Punchdown replacement blade
10051200 Screwdriver replacement blade (D914)
10645001 Wood screw started punch replacement blade
10051300 66 torque adapter replacement blade (D914)
$19.00
$19.00
$25.00
$25.00
$32.00
$49.00
$50.00
$66.00
$70.00
$22.00
$18.00
$25.00
$18.00
$31.00
*Eversharp blades last three times longer than standard punchdown tool blades.
D914S with 66/100 dually & Bix blade
D914S with 66/100 & free blade
D914S with both 66 & 110 blades
D914S with 66 blade
D914S with 110 blade
$99.00
$84.00
$84.00
$74.00
$74.00
D914S
D914 Automatic Impact Tool
The D914™ automatic impact tool is the only punch down tool to combine
torque & impact. Combines two tools, the hook & spudger, into the handle.
10051501
10051120
10051100
10051110
D914 with 66/110 & free blade
D914 with 66 & 110 blades
D914 with 66 blade
D914 with 110 blade
$73.00
$73.00
$61.00
$61.00
D914
D814 Punchdown Tool
Deluxe, all-in-one, telecom punch-down tool. Impact wheel has high & low
settings. Automatic spring impacts to seat and/or terminate wires.
10055503
10055501
10055200
10055000
10055110
D814 with 66/110 dually & Bix blade
D814 with 66/110 & free blade
D814 with both 66 & 110 blades
D814 with 66 blade
D814 with 110 blade
$84.00
$65.00
$65.00
$55.00
$55.00
D814
Paladin Tools Punchdown Tools
SurePunch Pro Punchdown Tool
SurePunch Pro is the first and only punchdown tool to have a detachable
light making it easy to work in dark places.
PA3590
PA3588
PA3596
PA3597
PA3598
PA3599
SurePunch Pro PDT Handle (no blade) & Light
SurePunch Pro PDT w/110/66 cut blade & light
SurePunch Pro PDT w/110 reversible cut & punch blade
SurePunch Pro PDT w/66 reversible cut & punch blade
SurePunch Pro PDT w/BIX™ Cut-only blade & light
SurePunch Pro PDT w/Krone LSA cut-only blade & light
$63.99
$55.55
$63.99
$63.99
$74.00
$85.75
SurePunch Pro
SurePunch Punchdown Tool
Lanyard holes in the end make the SurePunch PDT easy to carry and hard
to misplace. Uses twist-and-lock-style blades.
Blades for Impact PDT
Blades for SurePunch & SurePunch Pro PDT
110
630
Bix™
110/66
110
66
Bix™
PA4528
PA4529
PA4530
PA4571
PA4572
PA4573
PA4574
Paladin Tools Replacement Punchdown Blades
PA4571
SurePunch 110/66 Combination Cut-Only Blade
PA4572
SurePunch 110 Reversible Blade
PA4573
SurePunch 66 Reversible Blade
PA4574
SurePunch BIX Cut-Only Blade
PA4528
Standard Punchdown Replacement 110 Blade
PA4529
Standard Punchdown Replacement 630 Blade
PA4530
Standard Punchdown BIX Type Blade
$14.30
$14.30
$14.30
$23.50
$18.45
$15.50
$29.99
PA3570
PA3571
PA3572
PA3573
PA3574
PA3575
PA3579
SurePunch PDT Handle only
SurePunch PDT w/110/66 combination cut-only blade
SurePunch PDT w/110 reversible cut & punch blade
SurePunch PDT w/66 reversible cut & punch blade
SurePunch PDT w/BIX cut-only blade
SurePunch PDT w/Krone LSA blade
SurePunch PDT w/110 & 66 reversible cut/punch blade
$45.45
$54.15
$54.15
$54.15
$59.59
$58.95
$63.99
SurePunch
Impact Punchdown Tool
Impact punchdown tool for terminating AWG 28-24 telephone cables into
66, 88, 108, 109, 110, 630A6, Bix™ & Krone®-type bifurcated terminals.
PA3526
PA3527
PA3528
PA3535
PA3536
PA3532
Impact Punchdown Tool - handle only
Impact Punchdown Tool w/66 blade
Impact Punchdown Tool w/110 blade
Impact Punchdown Tool w/630 blade
Impact Punchdown Tool w/BIX-type blade
Impact Punchdown Tool w/Krone-type blade
$38.45
$52.40
$52.40
$55.90
$69.90
$55.90
Impact
Platinum Tools Punchdown Tools
PRO Series Punchdown Impact
Tool terminates & trims wires in 66, 110 krone & BIX cross connect blocks.
Used to terminate and trim wires in 110 & 630 style wall jack modules.
13100
13105
13106
13107
13108
13109
66
110
630
66/110
110 EZData
Bix
Krone
PDT Extension
13001
13002
13003
13004
13021
13023
13024
13022
Platinum Tools Replacement Punchdown Blades
13001
66 Style Blade
13002
110 Style Blade
13003
630 Style Blade
13021
66/110 Combo Blade
13004
110 Style EZ-Data Cut Blade
13022
Punchdown Tool Extension
13023
BIX™ Style Blade
13024
Krone™ Style Blade
PRO Punchdown Impact Tool Handle Only
PRO Punchdown Impact Tool w/66 blade
PRO Punchdown Impact Tool w/110 blade
PRO Punchdown Impact Tool w/ 66 & 110 Blades
PRO Punchdown Impact Tool w/110 EZ-Data Cut Blade
PRO Punchdown Impact Tool w/66/110 Combo Blade
$35.00
$48.00
$48.00
$60.00
$55.00
$48.00
Pro Impact
EZ-Tune Punchdown Tool
Tool terminates/trims wires in 110 & 630 wall jack modules.
13200 EZ-Tune Punchdown Tool, Handle Only
13208 EZ-Tune Punchdown Tool with 110 EZ-Data Cut Blade
$39.95
$58.95
EZ-Tune
$13.95
$13.95
$13.95
$13.95
$18.95
$17.95
$28.50
$28.50
Major Credit Cards Accepted
Punchdown Impact Tool
Tool can terminate and trim wires in 110 & 630 style wall jack modules.
Compatible with tools & blades by Harris, Ideal, & others
13000
13005
13006
13007
Punchdown Impact Tool Handle Only
Punchdown Impact Tool w/66 blade
Punchdown Impact Tool w/110 blade
Punchdown Impact Tool w/66 & 110 Blades
$33.50
$45.00
$45.00
$56.95
Impact
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
35
Pro-Tool Kits
All the professional tools you need to cut, strip, clean and connect network phone and data lines to blocks
and jacks. Bundled together in our sleek form-fitting PVC Dur-A-GripTM Tool Pouch holds your tools securely
inside, even upside down. Six tool kits combinations to choose from to meet a multitude of applications.
- All kits include ergonomically designed Dur-a-Grip pouch for convenient tool storage on belt
- D914™ and D814™ industry standard punchdown tools make for solid terminations
- Easy to use cable stripper quickly rings and slits many types of cable
- Cut and strip wire cleaner and faster with the Electricians’ D-Snips
- Six tool kits combinations available for a multitude of applications
IS40
IS60 Pro-Tool Kit: D914S Impact Tool, Electrician’s D-Snips, Cable Stripper, Mini Maglite, & Dur-a-Grip Pouch
IS50 Pro-Tool Kit: D914S Impact Tool, Electrician’s D-Snips, Cable Stripper, EverSharp 66/110 Cut Blade,
and Dur-A-Grip Pouch
IS40 Pro-Tool Kit: D814 Impact Tool, Electrician’s D-Snips, Cable Stripper, EverSharp 66/110 Cut Blade,
Probe Pic, and Dur-A-Grip Pouch
IS50
11293000
11292000
11291000
IS60
IS60 Pro-Tool Kit
IS50 Pro-Tool Kit
IS40 Pro-Tool Kit
$179.00
$153.00
$145.00
Krone Punchdown Tool
The Versatile Krone Tool the only one you need. The Krone Tool terminates and trims wires with one punch.
It’s the only tool you’ll need to add, Change or remove Krone connections.
6417-2055-01 Krone Punchdown Tool
$90.00
ProPunch 110 Multi-pair Punchdown Tool
- Smooth operation
- Comfortable, rugged handle absorbs punch recoil
- Cut and punch blade cassette or switch blades for punch only
- Terminates 28-22 AWG (.08-.34 mm²) solid or stranded wires with single insulation - Delivers more than 1.5 times the force of other multi-punchdown tools on the market using less hand force
- Terminates in a single punch - including 23 AWG Cat6 cable
- Performs in excess of 30,000 cycle punches
PA3560
PA3561
ProPunch 110 5 Pair Punchdown Tool
ProPunch 110 4 Pair Punchdown Tool
$99.99
$99.99
D-Impactor 5-Pair Impact Tool
The D-Impactor™ 5-pair impact tool allows technicians to simultaneously cut and terminate five copper
pairs on a 110 block. This rugged, easy-to-use tool saves time and reduces hand stress by cutting down on
the total number of manual terminations, and combining the cut and no-cut blades into a single unit allows
users to reverse cutting blades at record speeds. Fewer moving parts and the patented blades guarantee
optimal performance for the life of the tool.
10059000
D-Impactor 5-Pair Impact Tool
$187.00
C5 Tool
The 5-pair termination tool is a versatile impact tool designed to terminate and cut UTP cable, and seat
connecting blocks. The impact mechanism and termination blades have been designed to reliably
terminate and cut UTP cable the first time, every time. Features an easy to hold, ergonomically designed
handle that helps reduce fatigue when trimming wire or seating connection blocks to the wiring base.
S788J5
36
Datacomtools.com
TM
C5 Tool
$265.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
MicroScanner2 Cable Verifier
The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It
starts by taking results from what was four different test modes and displaying them all at once –
graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What’s more, its integrated
RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for
awkward adapters. The end result is reduced test time and technician error.
MS2-100
Today’s communications technicians have a lot more problems to deal with than just the cabling. They have
to rule out a whole host of potential cable and service issues before determining the cause of a connection
problem. MicroScanner2 acknowledges this, giving technicians high power vision to verify today’s most
common voice, data, and video services. That means faster, more comprehensive troubleshooting
MS2-100 Includes:
- MicroScanner2 Cable Verifier
- Main wiremap adapter
- Multi-language Getting Started Guide
- User CD
- Batteries
- Fluke Networks carry pouch
Microscanner2 Cable Verifier
MS2-100
- MicroScanner2 Cable Verifier
- Main wiremap adapter
- Remote identifiers #2-7
- IntelliTone Pro 200 probe
- Shielded twisted-pair RJ45 patch cord
- RJ11 patch cord
- Clip-set RJ45 to 8 alligator clip bare wire adapter
- F Coax push on patch cord
$475.00
- Accessory soft pouch
- (2) AA alkaline batteries
- (1) 9V alkaline battery
- MicroScanner2 Getting Started Guide
- MicroScanner2 Owners CD
- IntelliTone Pro Getting Started Guide
- IntelliTone Pro owners CD
- Packaged in a deluxe Fluke Networks carry case
Microscanner2 Cable Verifier Kit
MS2-KIT
- MicroScanner2 Cable Verifier
- IS60 Pro-Tool Kit
- IntelliTone™ 200 Tone Probe
- RJ11 and RJ 45 patch cables
$840.00
- Lanyard
- Owners CD and quick start guide
- 9 volt battery
- Packaged in a deluxe Fluke Networks carry case.
MicroScanner2 Termination Kit
MS2-TTK
MS2-KIT
MS2-TTK
$843.00
Grip Packs
Part #
1116
1925.1
3589
4940
4571
4599
3570
Description
Data SureStrip
Datacom & Telecom Scissors
SurePunch® Pro PDT Handle only
GripPack Quick Release Tool Holster
110/66 Blade - SurePunch & Pro PDTs
LED Light
SurePunch Handle
PT-540
Hex bit adapter
Datacomm Snips
Mini Maglite with 2 AA Batteries
Black Sharpie® Pen
PA4941
•
•
•
•
•
•
PA4942
•
•
•
•
•
•
PA4943
•
•
•
•
•
•
•
•
•
$121.45 $110.10 $113.35
PA4946
•
PA4943
•
•
•
PA4946
$95.95
Jonard Holster Kits
TK-50 includes:
- Can wrench
- Cable splicing Knife
- Electrician’s scissors
- Probe pick
- Belt Pouch
TK-22148 includes:
- Electrician’s Scissors
- Combo crimper long nose plier
- Belt Pouch
TK-375 includes:
- Fiber optic stripper
- Electrician’s scissors
- Belt Pouch
TK-50
TK-22148
TK-375
Five piece telecom installers kit
Telephone splicing kit
Fiber optic kit
Major Credit Cards Accepted
$38.00
$32.25
$38.00
TK-50
TK-22148
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
TK-375
37
CI-Kits
CI-KIT2
CI-KIT
The CI kit provides all the tools that a telecommunications technician needs for day-to-day activities. Included
in the kit is an S814 impact tool with 66 and 110 termination blades, a probe pic, electricians scissors, mini
flathead screwdriver, and a cpt –web cable preparation tool. These tools are stored in a handy , lightweight
clip-on pouch which allows the installer to cut, strip, and terminate cabling without having to carry separate
tools or larger tool kits.
Siemon’s CI KIT2 builds upon the many benefits of the standard CI KIT but is larger to fit the popular AllPrep
Cable preparation tool in place of the cpt-web tool, and a “D-ring” has been added to carry additional tools.
These tools are stored in a lightweight clip-on pouch which allows the installer to cut, strip and terminate
cabling without having to carry separate tools or larger tool kits.
CI-KIT
CI-KIT2
Siemon Tool Kit
Siemon Tool Kit
$158.00
$193.75
PRO Network/Telco Installer Kit
Kit Includes
- 30-696 Ratchet Telemaster™
- 35-485 Punchmaster™ II Punch Down Tool with 110 Blade
- 35-473 Probe Pick & Spudger
- 45-165 Coaxial Stripper, 3/16 Inch to 5/16 Inch
- 35-088 Electrician’s Scissors w/Stripping Notch
- 35-497 Replacement Blade, Punchmaster™ II Turn-Lock™ Style 66 Blade
- 85-396 8-Position 8-Contact Round Solid, (RJ-45) (Package of 50)
- 35-535 Mechanic’s Tool Bag
33-506
PRO Network/Telco Installer Kit
$182.25
Master Series Network Service Kit
Kit Includes
- 30-696 Ratchet Telemaster™
- 35-485 Punchmaster™ II Punch Down Tool with 110 Blade
- 35-473 Probe Pick & Spudger
- 45-165 Coaxial Stripper, 3/16 Inch to 5/16 Inch
- 35-093 Cable Splicing Kit
- 35-497 Replacement Blade, Punchmaster™ II Turn-Lock™ Style 66 Blade
- 62-200 LinkMaster™ Tester
- 35-908 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
- 33-864 Tone Generator and Amplifier Probe Kit
- 62-096 Smart6™ Modular Tester
- 45-719 Kinetic T-Stripper/Tel Crimp Tool
- 85-396 8-Position 8-Contact Round Solid, (RJ-45) (Package of 50)
- 35-410 Large Mouth Bag - 13 in. long
33-706
Master Series Network Service Kit
$400.95
DataReady PRO Kit
A complete data cable installation kit providing everything to support the installer using commonly-available
connectors, and punchdown termination blocks. All tools contained in a professional-quality, soft-sided zipper
case with heavy-duty wrist strap.
Kit Contains:
- Data SureStrip™ Cat5e, Cat6, Phone Cutter/Stripper
- Untwist Tool
- Ergonomic CrimpALL/8000 Crimper Frame Only
- RJ45 WE/SS Die (8P8C)
- RJ11/12 WE/SS Die (6P6C, 6P4C, 6P2C)
- RJ22 Handset WE/SS Die (4P4C)
PA901378
38
Datacomtools.com
TM
DataReady® PRO Kit
- RJ45 AMP Die (8P8C)
- RJ11 AMP DEC-MMJ Offset Die (6P6C)
- SurePunch® Pro PDT Handle & Light
- 110/66 Blade - SurePunch® & SurePunch® Pro PDTs
- Double 110 Blade-SurePunch® & SurePunch® Pro
- LAN ProNavigator™ Tester 1543
$39.00
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Telecom Tool Kits
Fluke Networks’ Electrical Contractor Telecom Kits are comprised of industry standard telecommunications
tools and test equipment. Contents include: D®814 Impact Tool, Cable Stripper, Probe Pic, Electrican’s
D-Snips™, Standard 4-wire Modular Adapter and EverSharp® 66/110 cut blade. Soft carrying case included
for easy organization.
- Choose either kit I with TS®30 Test Set or kit II with Pro3000™ Analog Tone & Probe
- D814™ industry standard punchdown tool for reliable terminations
- EverSharp™ 66/110 Cut Blade provides flexibility for different block and jack terminations
- Cable Stripper quickly rings and slits many types of cable
- Use the Probe Pic to check for loose or damaged connections
- Cut and strip wire cleaner and faster with the Electricians’ D-Snips™
- Connect to jacks for testing with the Standard 4-Wire Modular Adapter
- A soft zippered pouch keeps your tools all in one convenient place
11290000
11289000
Electrical Contractor Telecom Kit I (with TS®30 Test Set)
Electrical Contractor Telecom Kit II (with Pro3000™ Analog T&P Kit)
11290000
11289000
$330.00
$232.00
Ultimate Tool Kits
Part #
PA900265
PA1116
PA1257
PA1555
PA1780
PA1556
PA8000
PA2061
PA2062
PA2063
PA2064
PA2067
PA2687
PA3589
PA4571
PA4572
PA4573
PA4574
PA4575
PA4591
PA4599
PA1543
PA1573
PA1594
PA1821
PA1119
PA1907
PA1908
PA1280
PA2281
PA2282
PA2283
PA9645
PA9714
PA9715
PA1900
PA9546
PA1902
PA9520
PA1903
PA1923
PA1927
PA9546
PA901074
PA4941
PA4923
Description
PA4932 PA4933 PA4934 PA4938 PA4939
KT8 Professional Cutter
•
•
•
Data SureStrip
­•
•
•
LC CST CATV
•
•
SealTite Pro Crimper
•
•
Butt Set
•
All-in-One Data & Phone Tool (WE/SS-style)
•
•
Ergonomic CrimpALL8000 Crimper Frame Only
•
•
RJ45 WE/SS Die for CrimpALL 800/1300 Series
•
RJ11/12 WE/SS Die, CrimpALL 8000/1300 Series
•
•
RJ22 Handset Die for CrimpALL 8000/1300 Series
•
RJ45 AMP Die for CrimpALL 8000/1300 Series
•
RJ11 DEC-MMJ Die, CrimpALL 8000/1300 Series
•
Dies for Crimp ALL 8000 & 1300 Series RJ45 & CATV
•
SurePunch Pro PDT Handle Only
•
•
•
110/66 Blade - SurePunch & Pro PDTs
•
110 Blade for SurePunch & Pro PDTs
•
•
66 Blade - SurePunch & Pro PDTs
•
•
•
BIX Blade for SurePunch & Pro PDTs
•
Krone LSA Blade for SurePunch & Pro PDTs
•
Double 110 Blade-SurePunch & Pro
•
•
SurePunch Pro PDT Detachable Light
•
LAN Pro Navigator Tester
•
•
•
Tone & Probe Plus Cable Check
•
•
LAN & A/V Cable-Check - 1594
•
AM 35 Round Cable Slitter (1 - 1.4”)
•
SmartHome Data SureStrip
•
BNC Extraction Tool
•
CATV
•
CST Pro Coax Stripper 3-Level (Green Cassette)
•
CST Pro Replacement Blade Orange
•
CST Pro Replacement Blade Black
•
CST Pro Replacement Blade Blue
•
RG59 Compression Cable TV F Connectors - 50pk
•
RG6/6Q Compression RCA Connectors - 10pk
•
RG6/6Q Compression BNC Connectors - 10pk
•
Can Wrench
•
•
RJ45 WE/SS 8P8C Modular Plugs (Cat5 & E) 10pk
•
RJ45 Modular adapter (8-Way)
•
•
•
RJ11 WE/SS 6P6C Modular Plugs - 10 Pack
•
RJ11 Adapter
•
Untwist Tool
•
•
Flaring Tool for CATV “F”: RG6,RG6Q & RG59
•
•
Twisted Pair Modular Connectors
•
CATV “F” (female) to BNC (male) Adapter
•
•
GripPack Quick Release PDT Holder
•
Ultimate Tool Bag
•
•
•
4932
4933
4934
4938
4939
PA4932
PA4933
PA4934
PA4938
PA4939
Ultimate Technician Tool Kit
Ultimate Premise Service Kit
Ultimate DataReady Pro Kit
Ultimate Telco Technician Tool Kit
Ultimate Coax Compression Tool Kit
Major Credit Cards Accepted
$499.00
$385.00
$329.00
$450.00
$445.00
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
39
Tool Kits
- Contains the tools for installing & testing
a Cable TV system
- Cable TV tone test set uses both
electromagnetic and electrostatic pickup
to tone through splitters, directional
couplers and taps
- Durable Cordura Plus zipper case
protects and organizes tools & includes
a see-through pouch for connectors
- Outside pockets provide convenient
storage of instruction manuals or
worksite documents
Includes: Kit Contents May Be Purchased Separately: 45482 Cable Cutter,
45578 Kwik Stripper CATV Stripper, 2 Level Stripper For RG6, RG59, RG7,
RG11, 46801 Kwik Cycle 9.000 Crimp Frame with Die Set for F-style Connectors on RG6 and RG59 Cable, 45516F Connector Ins
45467
CATV Coax Termination & Test Kit
$310.00
Paladin’s biggest data, voice, and coaxial
LAN installation kit provides everything for
twisted pair and coaxial cable installation. All tools contained in a professional
blow-mold case complete with form-fitting
foam.
Includes: KT 8 Professional Round Cable
Cutter (Max: 6 AWG), Data SureStrip™
Cat5e, Cat6, Phone Cutter/Stripper, LC
CST Coax Stripper 2-Level (RG59/6/6
Quad: .157), Ergonomic CrimpALL/8000
Crimper Frame Only, RJ45 WE/SS & CATV F Die, RJ11/12 WE/SS Die (6P6C,
6P4C, 6P2C), SurePunch® Pro PDT Handle & Light, 110 Blade for SurePunch® & SurePunch® Pro PDTs, 66 Blade - SurePunch® & SurePunch®
Pro PDTs, LAN ProNavigator™ Tester, Tone & Probe, RJ45 Modular adapter
(8-Way), CATV-F (Female) to BNC (Male) Adapter - 1 piece
PA901039
- Includes the tools and connectors
necessary for installing a voice and data
network.
- Durable Cordura® Plus zipper case
protects and organizes tools and
includes a see-through pouch for storing
connectors.
- Outside pockets provide convenient
storage of instruction manuals or work
site documents.
Includes: Zipper Case, Cable Cutter, Kwik Stripper Twisted Pair Stripper,
Punchdown Tool with 110 Blade, 66 style Punchdown Blade, Telephone
Ratchet Crimper for 4-6 and 8 Position Modular Plugs, 50 RJ45 Connectors,
& 50 RJ12 Connectors
45469
Voice and Category 5 Data Termination Kit
$280.00
Premise Service Kit
$387.31
- Includes the tools, connectors and
testers necessary for installing a Cat 5
data network.
- Durable Cordura Plus zipper case
protects and organizes tools and
includes a see-through pouch for storing
connectors.
- Outside pockets provide convenient
storage of instruction manuals or work
site documents.
Includes: Zipper Case, ,Cable Cutter, Kwik Stripper Twisted Pair Stripper,
Punchdown Tool with 110 Blade, Telephone Ratchet Crimper for 4-6 and 8
Position Modular Plugs, 50 RJ45 Plugs, 468T Modular Cable Tester Transmitter, & 468R Modular Cable Tester Receiver
45470
Category 5 Data Termination and Test Kit
$325.00
Fishing Poles / Stix
Fish Poles
-
Fish Poles Features:
Designed specifically for pushing and pulling wires over long distances.
Push or pull wires over suspended ceilings, or crawl spaces and in attics.
Non-conductive, high-impact construction.
Specialized hook can be used to install wires in suspended ceilings.
Velcro strap secures pole when in collapsed position.
Self-contained, no loose parts.
Lightweight design to minimize fatigue.
Glo-Stix Features:
- Luminescent fiberglass rods glow in the dark to make fishing voice, data and
video wires easier in dark spaces, such as above ceilings, and in walls.
- More flexible for fishing in walls through outlet box holes.
- Sturdy, steel-threaded connectors are interchangeable with Green- lee - 1/4”
Fish Stix.
- Clear, non-metallic storage tube keeps Glo Stix charged.
02268/FP12
10442/FP18
10443/FP24
40
Fish Pole 12’
Fish Pole 18’
Fish Pole 24’
Datacomtools.com
$50.69
$77.65
$131.50
TM
Fish Stix
Glo Stix
Fish Stix Features:
- 1/4” (6.4 mm) diameter fiberglass rods provide added rigidity when multiple
sections are connected.
- 200 lbs. (0.9 kN) minimum pulling strength.
- Two different threaded tips accommodate various bundles of wire or cable.
- 540-24 includes one 3’ Glo Stix™ section for improved tip visibility.
- 540-12 includes (3) 4’ fish stix sections
- 540-24 includes (3) 6’ fish stix sections and (1) 3’ fish stix section
- 200 lbs. maximum pulling strength.
- 540-6: Kit includes a bullet nose and “J” hook threaded tips, packaged in a
plastic tube
- 540-15: Kit with fixed bullet nose on both ends
540-12
540-24
540-6
540-15
12’ Greenlee Fish Stix
24’ Greenlee Fish Stix
Glo Stix 6’ (4.0 mm x 1.8 m)
Glo Stix 15’ (4.7 mm x 4.6 m)
$43.05
$75.93
$18.95
$48.55
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Fish Tape
Used for general fishing in conduit
- Maximum durability
- Improved low profile tip for easy fishing
through all sizes of conduit
- Available in 50’, 65’, 125’ and 240’ length
- 1/8”, 1/4” and flat steel profiles to
accommodate different fishing situations
Used in general fishing in conduit and harsh environmental situations
- Corrosion free stainless steel tape for
maximum life
- Fish further & faster w/Speed Flex Leader
- Available in 100’ and 200’ lengths
- Replaceable Speed Flex Leader
All MagnumPRO Fish Tapes Feature:
- Comfort grip & rugged case design
- Superior rapid grip tape payout and rewind
- Viewing ports to see amount of tape in
case and allow quick debris removal.
All MagnumPRO Fish Tapes Feature:
- Comfort grip and rugged case design
- Superior rapid grip tape payout and rewind
- Viewing ports to see amount of tape in
case and allow quick debris removal
Oil-Tempered Spring Steel MagnumPRO Fish Tape
FTS438-65
1/8” x 65’ Steel Fish Tape
RS438-65
1/8” x 65’ (No Case) Replacement Steel Fish Tape
FTS438-125 1/8” x 125’ Steel Fish Tape
RS438-125
1/8” x 125’ (No Case) Replacement Steel Fish Tape
FTS438-240 1/8” x 240’ Steel Fish Tape
RS438-240
1/8” x 240’ Replacement Steel Fish Tape
FTS438W-100 1/4” x 100’ Steel Fish Tape
RS438W-100 1/4” x 100’ (No Case) Replacement Steel Fish Tape
S438W-200
1/4” x 200’ (No Case) Steel Fish Tape
438-5H
1/8” x 50’ Steel Fish Tape
438-2X
1/4” x 25’ (Flat Steel Tape) Steel Fish Tape
R438B
Swivel Ball Head for use with 1/8” Steel Fish Tapes
R438-BM
Ball Tip Male Half
439-1
12” Flexible Fish Tape Leader
$31.70
$20.95
$57.25
$35.20
$79.25
$52.50
$63.50
$43.48
$74.25
$20.25
$13.15
$12.50
$8.10
$21.15
Used in proximity to energized lines and more flexible than steel
- Non-conductive, curl-resistance nylon tape
for fast clean fishing
- Good for fishing in conduit with wire or
cable present
- Available in 50’ and 100’ lengths
$91.65
$72.65
$95.00
$85.00
The new SmartMARK™ fish tapes increase
productivity with the laser etched distance
markings, SpeedFlex® leader and rugged,
advanced, no-bump, flared comfort grip with
superior rapid pay-out and rewind capability.
Whether you need to fish a few feet or up to
250 feet, our SmartMark™ steel fish tapes
with SpeedFlex leader allow you to fish
farther and know how far you have fished, in
both feet and meters, improving
productivity by saving time with the
elimination of a separate measuring step
in the installation process. The SmartMARK
steel fish tape offering provide the best
choices needed to get your fishing job done
faster and easier.
SmartMARK Laser Etched Fish Tapes with SpeedFlex Leaders
FTS438DL-150 SmartMARK™ 150’ Laser Etched Steel Fish Tape $65.00
with SpeedFlex® Leader
FTS438DL-250 SmartMARK™ 250’ Laser Etched Steel Fish Tape $79.00
with SpeedFlex® Leader
Major Credit Cards Accepted
$65.31
$50.69
$85.25
$70.13
$14.65
More flexible than steel, stronger than fiberglass or nylon and slips through later and vertical bends in the same run
- Multi-strand cable for maximum flexibility
- Available in 50’ and 100’ lengths
All MagnumPRO™ Fish Tapes Feature:
- Comfort grip and rugged case design
- Superior rapid grip tape payout and rewind
- Viewing ports to see amount of tape in
case and allow quick debris removal
Flexible Steel Cable MagnumPRO Fish Tape
FTFS439-50 3/16’ x 50’ - Flexible Steel Fish Tape
FTFS439-100 3/16” x 100’ - Flexible Steel Fish Tape
FS439-100
3/16” x 100’ Double Tip (No Case) Flexible Tape
All MagnumPRO™ Fish Tapes Feature:
- Comfort grip and rugged case design
- Superior rapid grip tape payout and rewind
- Viewing ports to see amount of tape in
case and allow quick debris removal
Nylon MagnumPRO Fish Tape
FTN536-50
3/16” x 50’ Nylon Fish Tape
RN536-50
3/16” x 50’ (No Case) Replacement Nylon Tape
FTN536-100 3/16” x 100’ Nylon Fish Tape
RN536-100
3/16” x 100’ (No Case) Replacement Nylon Tape
Stainless Steel MagnumPRO Fish Tape
FTSS438-100 1/8” x 100’ Stainless Steel Fish Tape
RSS438-100 100’ (No Case) Replacement Stainless Steel Tape
FTSS438-200 1/8” x 200’ Stainless Steel Fish Tape
RSS438-200 200’ (No Case) Replacement Stainless Steel Tape
439-2
12” SPEED FLEX Leader (Solder Joint)
$91.65
$147.15
$109.35
Used in proximity to energized lines and where good flexibility is desired
- Non-conductive fiberglass tape w/patented
low-friction coating for faster fishing
- Perfect for fishing in conduit with wire or
cable present
- Available in 50’, 100’, 200’, and 250’
All MagnumPRO™ Fish Tapes Feature:
- Comfort grip and rugged case design
- Superior rapid grip tape payout and rewind
- Viewing ports to see amount of tape in
case and allow quick debris removal
Fiberglass MagnumPRO Fish Tape
FTF540-50 11/64” x 50’ - Fiberglass Fish Tape
FTF540-100 11/64” x 100’ - Fiberglass Fish Tape
RF540-100 11/64” x 100’ (No Case) - Replacement Tape
542-150
3/16” x 150’ (In Reel Stand) - Fiberglass Fish Tape
05156
3/16” x 150’ (No Case) - Replacement Fish Tape
542-200
3/16” x 200’ (In Reel Stand) - Fiberglass Fish Tape
05157
3/16” x 200’ (No Case) - Replacement Fish Tape
542-250
3/16” x 250’ (In Reel Stand) - Fiberglass Fish Tape
05158
3/16” x 250’ (No Case) - Replacement Fish Tape
10565
Pull Eye Repair Kit (Pulling Eye and Adhesive)
35750
Accessory Kit for 3/16” Fish Tapes (Flexible pulling
leader, flexible pushing leader, pulling eye, splice
ferrule and threaded ferrule)
35908
1/8” (3mm) Repair Kit (Threaded end ferrule, splice
ferrule, and pulling eye)
35909
3/16” (4.7mm) Repair Kit (Kit Includes: threaded
end ferrule, splice ferrule, and pulling eye)
35919
1/8” (3mm) Pulling Eye
35930
3/16” (4.7mm) Pulling Eye
1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com
$135.40
$183.95
$150.00
$430.75
$235.00
$529.71
$310.00
$612.36
$385.00
$22.70
$125.00
$38.17
$42.00
$11.35
$13.25
41
F-Connectors
BNC & RCA Connectors
- Approved for use by most cable TV & satellite companies.
- RF signal contains strong signal.
- Connections do not come loose.
- Provides superior durability in all climates compared to other
manufactures’ connectors.
89-211
92-610
92-650
92-656
92-660
RG-11, Dual Shield Compression Connectors, 10Pk $51.95
RG-59 Compression F-Connectors Jar of 50
$35.75
RG-6 Compression F-Connectors Jar of 50
$33.75
RG-6 Compression F-Connectors Jar of 100
$62.98
RG-6 Plenum Compression F-Connectors Jar of 50 $50.50
Waterproof CATV “F” compression connectors for digital
cable, satellite, and cable modems. Works with HDTV!
- Quick & Easy assembly
- Compression-type for indoor or outdoors
- Works with HDTV & digital cable
- For satellite, CATV, cable modems, video, & UHF
PA9645
PA9646
PA9647
Sealtite F Connectors RG59 - Jar of 50
Sealtite F Connectors RG6 - Jar of 50
Sealtite F Connectors RG6 Quad - Jar of 50
$29.99
$29.99
$29.99
Compression Kits
RCA
- Constructed of nickel plated brass & gold plated head.
- Easily installs onto RG6 & RG59 cable.
- HDPE adapter sleeve & inner “O” ring provide double protection.
- Compatible with 30-603 & 30-793 OmniSeal Compression tools.
89-047
89-5047
89-048
89-5048
89-572
89-570
89-582
89-580
BNC RG-59 Compression Connectors 15pk
BNC RG-59 Compression Connectors 35
BNC RG-6 Compression Connectors 15 pk
BNC RG-6 Compression Connectors 35
RG59 RCA Compression Connectors 10pk
RG59 RCA Compression Connectors 35
RG6 RCA Compression Connectors 10pk
RG6 RCA Compression Connectors 35
$34.55
$74.30
$34.55
$74.30
$23.15
$69.45
$23.15
$69.45
Compression Tools
SealTite Pro Kit
Includes all the tools
you need to prepare the
cable and terminate any
compression connector
using RG59, RG6 or RG6
Quad shield cables.
- KT 8 Cutter
- LC CST CATV Stripper
- RG6 CATV Flaring Tool
- SealTite Pro Crimper
- SealTite RG6/Quad (10) Connectors
$103.10
Basic Compression Kit
- Economy Compression Tool
- Data T-Cutter
- RG6 Quad connectors: 10
- Coax Stripper
- RG6 connectors: 10
- RG59 connectors: 10
33-620
Basic Compression Kit
Service Compression Kit
- RG6 universal connectors: 50
- RG6 universal plenum connectors: 10
- RG59 BNC connectors: 10
- RG6 BNC connectors: 10
33-630
Compression Tool, F-Connector
- Compresses Series 6 & 59 coax
compression connectors.
- Connection never comes loose.
- Adjustable nesting fixture accommodates a
variety of connectors.
30-633
PA4910 Paladin Tool SealTite Pro Kit
$93.70
- OmniSeal Compression tool
- Port Seal
- Data T-Cutter
- RG6 Stripmaster
- RG6 Quad blade
Service Compression Kit
$340.00
Coax Flaring Tools
$24.05
OmniSeal™ Pro Compression Tool
- Connects RG6, RG Quad Shield, RG59,
(33-793 also works on BNC) &
compression F-Type coaxial cables.
- Fast & reliable solution to home theatre,
CATV, satellite & security applications.
- Works with most compression connectors.
30-603
$65.40
30-793
$79.99
SealTite Pro Crimper
Crimps linear “F”, BNC, RCA, & compression
connectors for RG59, RG62AU, RG6 & Quad
cables.
PA1555
$58.95
BNC/F-Connector Tool
- Flare the shield braid back from the dielectric without nicking
your finger.
- Attachment tool enables you to hold the connector comfortably
to insert onto cable.
- One year warranty.
Cable TV “F” Flaring & Attachment Tool
PA1927
$8.75
RG59/RG6/RG6 Quad Flaring Tool
PA1917
Datacomtools.com
TM
- Comfortable driver-style plastic handle.
- One-year warranty.
- 1908 - Use the hex socket to easily
remove & insert connectors.
1908
CATV “F” Extraction Tool 8” $13.99
1916
BNC Extraction Tool 12”
PA1907 BNC Extraction Tool 8” $13.99
$13.99
- Combines a 7/16 in. hex Socket & 3/832 threaded end.
- Holds F-connector during insertion to
ease seating against dielectric.
- Works on RG59 and RG6/6 Quad Cable.
- Flares shield away from center dielectric.
- Saves time on CATV and satellite installations.
- One year warranty.
42
BNC
$13.00
35-046 F-Connector Tool
$24.95
Free Ground Shipping on Orders over $99.00. In the contiguous states, certain items may not apply
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement