Swegon KSAb Installation Instructions

Below you will find brief information for Air Volume Control KSAb 160, KSAb 200, KSAb 250, KSAb 315, KSAb 400, KSAb 500. KSAb series are air volume controllers that can be used to control the amount of air flowing through a duct. The KSAb series is available in a range of sizes to meet different needs. This document provides information on how to install the KSAb units.

PDF Download

Document

Hello! I am an AI chatbot specifically trained to assist you with the Swegon KSAb Installation Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

24 V AC power supply
Communication through LonTalk cable
Analogue transfer from Z2 on master to Z1 on slave controler
Slave controller operation
Multiple installation options
Maximum operating temperature: 50°C
Adjustable flow control
Integration with sound attenuator (CLA)

Frequently asked questions

The KSAb unit requires a 24 V AC (±10%) power supply with a maximum of 6A fuse and a wire area of 1.5 mm2.

There are two options for transferring slave values from a master unit: communication through LonTalk cable or analogue transfer from Z2 on the master to Z1 on the slave controller.

The maximum operating temperature for a KSAb unit is 50°C.