Allied Telesis AT-MC605 Datasheet

Datasheet | Media Converters

AT-MC605

Extended Ethernet

TM

over VDSL

AT-MC605

Subscriber/provider unit

Extended Ethernet Operation

Used as a pair, the AT-MC605 provides up to

100Mbps / 60Mbps of data transfer, while supporting POTS service over phone-grade, twisted-pair, wiring (CAT1, 2, 3) at distances up to 3km or 10,000 feet.These units are the ideal solution for providing data on 'last-mile' twistedpair circuits or existing in-building wiring.

Standard Ethernet operation is preserved endto-end, retaining VLAN tags, and Ethernet MAC information across the link, while higher layer protocols are passed transparently. 10/100Mbps

Ethernet operation is supported simultaneously with POTS, ISDN or PBX signaling, without disruption.

MTU and MDU Applications

Multi-Tenant Units (MTU) such as offices and campuses, and Multiple Dwelling Units (MDU) such as hotels and apartments are an ideal environment for the AT-MC605 network extenders, where private phone-grade wiring can be used to provide broadband access to

Internet services including video streaming, www, gaming and e-mail.There is no need to re-wire premises with expensive CAT5 or fiber to provide broadband Ethernet services.

Standalone and Rack-mount

The AT-MC605 provider unit is available as a compact standalone unit for installation at the central office, or alternatively, it can be rackmounted in the standard AT-MCR12 chassis from Allied Telesis, capable of housing up to twelve units in one compact chassis with a redundant power supply, simplifying wiring and minimizing space requirements.

Plug and Play Operation

Simply connect to the RJ-45 Ethernet port and the unit will automatically auto-sense and configure for 10T or 10/100TX, as well as full or half-duplex Ethernet operation. An integral

POTS splitter means that existing phone services are not affected - no reconfiguration is required.

Key Features

• Up to 100Mbps / 60Mbps VDSL operation up to 3km or 10,000ft

• Can function as a subscriber or provider by flipping a switch

• Traffic shaping upstream and downstream

• Supports both fast mode and interleave mode

• Operates over category 1, 2, 3 or 5 telephone quality cabling

• 10/100 Ethernet port

• POTS port

• Integral POTS splitter

• Auto MDI/MDI-X

• Power, Ethernet activity and link LEDs

• VDSL link and rate LEDs

• Fully configurable using front panel dipswitch

• Standalone and rack-mountable

• Wall-mountable using optional AT-WLMT bracket

• Compact form factor

• Both symmetrical and asymmetrical operation

• Metal chassis

• Energy Star compliant external power adapter

Allied Telesis www.alliedtelesis.com

AT-MC605

| Extended Ethernet over VDSL

Typical Performance Over POTS Network

Typical Performance Over ISDN Network

Allied Telesis

AT-MC605

Server

AT-MCR12 &

AT-MC605

ADSL

Router

AT-8000S

Internet

PBX

Public Switch

Telephone

Network (PSTN) www.alliedtelesis.com

AT-MC605

| Extended Ethernet over VDSL

Technical Specifications

Product Specifications

DMT modulation

Spectrally compatible with ISDN and POTS services

FDD duplexing

Datarate up to 100Mbps / 60Mbps full-duplex

4M flash

Half/full-duplex

Auto-negotiation

Auto MDI/MDI-X

Speed/Distance

Speed up to 100Mbps / 60Mbps at short distances; data throughput up to 3km or 10,000ft distances

(subject to cable type)

Front Panel Indicators

System power

Ethernet link

Ethernet activity

VDSL link

VDSL rate

Interface Connections

VDSL interface RJ-11

Ethernet interface RJ-45

POTs interface

Management

RJ-11

4-pin DIP switch

Reliability

MTBF 700,000 hours

Physical Characteristics VDSL

Interface

Dimensions 9.5cm x 10.9cm x 2.5cm

(W x D x H)

Weight

Mounting

300g

Tabletop and rack-mountable*

* requires AT-MCR12 chassis

Environmental Specifications

Operating temp. 0°C – 40°C (32°F – 104°F)

Storage temp.

-25°C to 70°C (-13°F to 158°F)

Relative humidity 5% to 95%, non-condensing

Operating altitude up to 10,000ft

Power Characteristics

External power supply 120V AC, 60Hz (US model)

240V AC, 50Hz

(European models)

Input supply voltage 12vDC

Max current 500mA

Power cconsumption 4W

Energy Star compliant

Country of Origin

China

Approvals

UL 1950

FCC class B

CSA

EN 55022 class B

EN 60950 (TUV)

EN 50082-1

Ordering Information

AT-MC605-60

Subscriber/provider unit with EnergyStar multi-country power adapter.

USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895

European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11

Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830

www.alliedtelesis.com

© 2009 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.

617-000318 Rev. E