CYP CLUX-18S Operation Manual
Advertisement
Advertisement
1x8 HDMI Splitter
Operation Manual
CLUX-18S
TABLE OF CONTENTS
1. Introduction................................................................................
1
2. Features......................................................................................
1
3. Operation Controls and Functions..........................................
2
3.1 Front Panel...........................................................................
2
3.2 Rear Panel............................................................................
3
4. Connection and Installation.....................................................
4
5. Specifications............................................................................
4
6. Cypress HDMI v1.3 Series........................................................ 6
1. Introduction
The HDMI Distribution Amplifier Series is the most advanced solution to HDMI signal distribution. Each product in this series is compatible to HDMI specifications, a cutting edge technology which defines the support to transfer
Deep Color (10-bit and12-bit ) video and new lossless compressed (Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, the HDMI
DA series also does signal amplification and equalization, so as to provide high performance I/O of audio and video. Each of the buffered output can run up to 15 meters and can be cascaded.
2. Features
HDMI HDCP1.1 and DVI1.0 compliant Receiver.
Deep color video up to 12bit, 1080p@60Hz.
One HDMI source to connect up to eight HDMI displays simultaneously.
HDCP keysets allows each output to work independently when connecting to a HDMI display.
Splits a HDMI source up to eight outputs without signal loss.
Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable.
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio transmission (32-192kHz Fs sample rate).
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480i to 1080p.
HDMI cable distance test with 1080p resolution: Input or Output source can run up to 15M/5.1CH.
Note:
A. Cable tested with 24AWG using cables of another type may result in a
different operating distance.
B. Cable distance test included the following: PS3 120G and 37" Samsung
12-bit LCD TV.
C. Figures provided in this manual are reference figures only, actual
figures may depend on source and display use with cable specification.
Can selected EDID source from TV or this splitter.
Full HDCP Compliant.
1
3. Operation Controls and Functions
3.1 Front Panel
2
HDMI / DVI HDCP
SYNC
CLUX-18S 1X8 HDMI 1.3 SPLITTER
1 3
5 4 3 2 1
OUTPUT
8 7 6
POWER
4 5
1 HDMI/DVI Indicator: The LED will illuminate when the selected HDMI input source is originally from an HDMI output, the LED will not illuminate when the selected HDMI input source is originally from a DVI output.
2 HDCP Indicator: The LED will illuminate when the selected HDMI input source is HDCP-protected.
3 SYNC Indicator: The LED will illuminate when the selected HDMI IN connects to an HDMI or DVI output correctly.
4 HDMI output Indicator: The LED will illuminate when the output sources are been connected.
5 POWER Indicator: The power LED will illuminate when power on.
2
3.2 Rear Panel
EDID
STD TV
HDMI IN
1 2
1 2 3 4
HDMI OUT
5 6 7 8
DC 5V
3 4
1 EDID Control Jumper: Default factory setting is TV, leave as is if the display is properly. Switch to STD to use build-in EDID if the display has problems.
When the EDID control jumper in TV selection, the unit will detect the first
HDMI output source’s EDID and record in the unit. If the first detected output source is DVI it will pass to next source, until the first HDMI been detected.
2 HDMI Input: Connect input port to the HDMI or DVI output of your source equipment such as DVD player or set-top-box.
3 HDMI Outputs 1 to 8: Connect each of the output ports to the HDMI display. When more than one output connected, the HDMI outputs play identical video signal simultaneously.
4 Power: Plug the 5V DC power supply into the splitter and connect the adaptor to AC wall outlet.
3
4. Connection and Installation
HDMI
HDMI
HDMI Cable
HDMI
HDMI
HDMI Cable
DVD or Set-Top-Box
HDTV
OR
HDMI display
OR
LCD TV
5. Specifications
Frequency Bandwidth
Input Port
Output Port
Power Supply
Dimensions (mm)
Weight(g)
Chassis Material
Silkscreen Color
Operating Temperature
2.25Gbps (Single Link)
1x HDMI female port (Type A)
8 x HDMI female ports (Type A)
5VDC/5A (US/EU standards, CE/FCC/UL certified)
436(W) x 160(D) x 44(H)
2000
Metal
Black
0°C ~ 40°C
4
6. Cypress HDMI v1.3 Series:
Product
CLUX-11S
CLUX-12S
CLUX-14S
CLUX-18S
CLUX-21SY
CLUX-31S
CLUX-31SY
CLUX-41SY
CLUX-41AT
CLUX-42S
CLUX-110S
CLUX-210S
CLUX-210T
Description
1x1 HDMI V1.3 Repeater
1x2 HDMI V1.3 Splitter
1x4 HDMI V1.3 Splitter
1x8 HDMI V1.3 Splitter
2x1 HDMI V1.3 Switcher
3x1 HDMI V1.3 Switcher
3x1 HDMI V1.3 Switcher
4x1 HDMI V1.3 Switcher
4x1 HDMI V1.3 Switcher with Digital Audio
4x2 HDMI V1.3 Switcher
1x10 HDMI V1.3 Splitter
2x10 HDMI V1.3 Splitter
2x10 HDMI V1.3 Splitter with Digital Audio
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20070816 MPM-CLUX18S

Public link updated
The public link to your chat has been updated.
Advertisement