BLP05H6110XRY datasheet

BLP05H6110XRY datasheet
BLP05H6110XR
Power LDMOS transistor
Rev. 3 — 3 February 2016
Product data sheet
1. Product profile
1.1 General description
A 110 W extremely rugged LDMOS power transistor for broadcast and industrial
applications in the HF to 600 MHz band.
Table 1.
Application information
VDS
PL
Gp
D
Test signal
f
(MHz)
(V)
(W)
(dB)
(%)
pulsed RF
108
50
110
27
75
1.2 Features and benefits







Easy power control
Integrated double sided ESD protection
Excellent ruggedness
High efficiency
Excellent thermal stability
Designed for broadband operation (HF to 600 MHz)
Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances
(RoHS)
1.3 Applications
 Industrial, scientific and medical applications
 Broadcast transmitter applications
BLP05H6110XR
Power LDMOS transistor
2. Pinning information
Table 2.
Pinning
Pin
Description
1
gate 2
2
gate 1
3
drain 1
4
drain 2
5
Simplified outline
4
Graphic symbol
4
3
1
pin 1 index
5
2
[1]
source
1
2
3
aaa-003574
[1]
Connected to flange.
3. Ordering information
Table 3.
Ordering information
Type number
Package
Name
BLP05H6110XR
Description
Version
HSOP4F plastic, heatsink small outline package; 4 leads(flat)
SOT1223-2
4. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VDS
Min
Max
Unit
drain-source voltage
-
135
V
VGS
gate-source voltage
6
+11
V
Tstg
storage temperature
65
+150
C
Tj
junction temperature
-
225
C
[1]
Conditions
[1]
Continuous use at maximum temperature will affect the reliability, for details refer to the on-line MTF
calculator.
5. Thermal characteristics
Table 5.
Thermal characteristics
Symbol Parameter
Product data sheet
Tj = 125 C
[1][2]
Rth(j-c)
thermal resistance from junction to case
Zth(j-c)
transient thermal impedance from junction Tj = 150 C; tp = 100 s;
to case
 = 20 %
[1]
BLP05H6110XR
Conditions
[3]
Typ
Unit
0.9
K/W
0.31
K/W
Tj is the junction temperature.
[2]
Rth(j-c) is measured under RF conditions.
[3]
See Figure 1.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
2 of 14
BLP05H6110XR
Power LDMOS transistor
aaa-018379
1
Zth(j-c)
(K/W)
0.8
(7)
(6)
(5)
(4)
(3)
(2)
(1)
0.6
0.4
0.2
0
10-7
10-6
10-5
10-4
10-3
10-2
10-1
tp (s)
1
(1)  = 1 %
(2)  = 2 %
(3)  = 5 %
(4)  = 10 %
(5)  = 20 %
(6)  = 50 %
(7)  = 100 % (DC)
Fig 1.
Transient thermal impedance from junction to case as a function of pulse
duration
6. Characteristics
Table 6.
DC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol Parameter
Conditions
V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID = 0.375 mA
BLP05H6110XR
Product data sheet
Min
Typ
Max
Unit
135
-
-
V
VGS(th)
gate-source threshold voltage
VDS = 10 V; ID = 37.5 mA
1.25
1.8
2.25
V
VGSq
gate-source quiescent voltage
VDS = 50 V; ID = 10 mA
-
1.7
-
V
IDSS
drain leakage current
VGS = 0 V; VDS = 50 V
-
-
1.4
A
IDSX
drain cut-off current
VGS = VGS(th) + 3.75 V;
VDS = 10 V
-
5.4
-
A
IGSS
gate leakage current
VGS = 11 V; VDS = 0 V
-
-
140
nA
RDS(on)
drain-source on-state resistance VGS = VGS(th) + 3.75 V;
ID = 1.31 A
-
1.1
-

All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
3 of 14
BLP05H6110XR
Power LDMOS transistor
Table 7.
AC characteristics
Tj = 25 C; per section unless otherwise specified.
Symbol
Parameter
Conditions
Min Typ
Max Unit
Crs
feedback capacitance
VGS = 0 V; VDS = 50 V; f = 1 MHz
-
0.4
-
pF
Ciss
input capacitance
VGS = 0 V; VDS = 50 V; f = 1 MHz
-
46
-
pF
Coss
output capacitance
VGS = 0 V; VDS = 50 V; f = 1 MHz
-
17
-
pF
Table 8.
RF characteristics
Test signal: pulsed RF; tp = 100 s;  = 20 %; f = 108 MHz; RF performance at VDS = 50 V;
IDq = 20 mA; Tcase = 25 C; unless otherwise specified; in a class-AB production test circuit.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Gp
power gain
PL = 110 W
25.5
27
-
dB
RLin
input return loss
PL = 110 W
-
9
-
dB
D
drain efficiency
PL = 110 W
72
75
-
%
aaa-018437
80
Coss
(pF)
60
40
20
0
0
10
20
30
40
50
VDS (V)
60
VGS = 0 V; f = 1 MHz.
Fig 2.
Output capacitance as a function of drain-source voltage; typical values per
section
7. Test information
7.1 Ruggedness in class-AB operation
The BLP05H6110XR is capable of withstanding a load mismatch corresponding to
VSWR > 65 : 1 through all phases under the following conditions: VDS = 50 V;
IDq = 20 mA; PL = 110 W pulsed; f = 108 MHz.
BLP05H6110XR
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
4 of 14
BLP05H6110XR
Power LDMOS transistor
7.2 Impedance information
drain 1
gate 1
Zi
ZL
gate 2
drain 2
001aan207
Fig 3.
Definition of transistor impedance
Table 9.
Typical push-pull impedance
Simulated Zi and ZL device impedance; impedance info at VDS = 50 V and PL = 110 W.
f
Zi
ZL
(MHz)
()
()
108
42  j116
34 + j8.1
7.3 UIS avalanche energy
Table 10. Typical avalanche data per section
Tamb = 25 C; typical test data; test jig without water cooling.
IAS
EAS
(A)
(J)
3
0.27
3.8
0.17
4.5
0.13
For information see application note AN10273.
aaa-020052
0.3
EAS
(mJ)
0.25
0.2
0.15
0.1
0.05
0
2.5
Fig 4.
BLP05H6110XR
Product data sheet
3
3.5
4
4.5
IAS (A)
5
Non-repetitive avalanche energy as a function of single pulse avalanche current;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
5 of 14
BLP05H6110XR
Power LDMOS transistor
7.4 Test circuit
200 mm
C4
R5
L1
C19
L3
C10
C6
C8
R3
T2
R1
80 mm
C2
C1
C13
C15
C12
C14
C3
C17
C16
R2
T1
R4
C7
C5
C9
C11
L4
C18
L2
R6
33.5 mm
85 mm
aaa-020055
Printed-Circuit Board (PCB): RF-35; r = 3.5 F/m; thickness = 0.765 mm; thickness copper plating = 35 m.
See Table 11 for a list of components.
Fig 5.
Component layout for class-AB production test circuit
Table 11. List of components
For test circuit see Figure 5.
Component Description
Value
Remarks
C1
multilayer ceramic chip capacitor 100 pF
[1]
C2, C3
multilayer ceramic chip capacitor 1 nF
[1]
C4, C5
multilayer ceramic chip capacitor 4.7 F, 50 V
C6, C7
multilayer ceramic chip capacitor 750 pF
C8, C9
multilayer ceramic chip capacitor 4.7 F, 100 V
Kemet: C1210X475K5RAC-T4
[1]
TDK: C5750X7R2A475KT
C10, C11
multilayer ceramic chip capacitor 750 pF
[1]
C12
multilayer ceramic chip capacitor 13 pF
[1]
C13, C14
multilayer ceramic chip capacitor 27 pF
[1]
C15, C16
multilayer ceramic chip capacitor 1 nF
[1]
C17
multilayer ceramic chip capacitor 47 pF
[1]
C18,C19
electrolytic capacitor
2200 F, 64 V
L1, L2
wire inductor
5 turns, D = 3 mm, 1 mm copper wire
L3, L4
wire inductor
8 turns, D = 3 mm, 1 mm copper wire
R1, R2
resistor
4.7 k
SMD 1206
R3, R4
shunt resistor
0.01 
Ohmite: FC4L110R010FER
R5, R6
metal film resistor
10 , 0.6 W
T1, T2
semi rigid coax
50 , length = 160 mm
[1]
EZ Form: EZ-141-AL-TP-M17
American Technical Ceramics type 100B or capacitor of same quality.
BLP05H6110XR
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
6 of 14
BLP05H6110XR
Power LDMOS transistor
7.5 Graphical data
The following figures are measured in a class-AB production test circuit.
7.5.1 1-Tone CW pulsed
aaa-018380
30
ηD
(%)
ηD
28
aaa-020056
56
100
Gp
(dB)
PL
(dBm)
80
54
26
60
Ideal PL
(2)
52
24
Gp
40
(1)
PL
50
22
20
20
0
20
40
60
80
100
120
PL (W)
48
0
140
21
VDS = 50 V; IDq = 40 mA; f = 108 MHz; tp = 100 s;
 = 20 %.
22
23
24
25
26
27
Pi (dBm)
28
VDS = 50 V; IDq = 40 mA; f = 108 MHz; tp = 100 s;
 = 20 %.
(1) PL(1dB) = 50.5 dBm (111 W)
(2) PL(3dB) = 51.0 dBm (126 W)
Fig 6.
Power gain and drain efficiency as function of
output power; typical values
BLP05H6110XR
Product data sheet
Fig 7.
Output power as a function of input power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
7 of 14
BLP05H6110XR
Power LDMOS transistor
aaa-018381
30
Gp
(dB)
aaa-018382
80
ηD
(%)
28
(1)
(2)
(3)
(4)
(5)
(6)
(7)
60
26
(7)
(6)
(5)
(4)
(3)
(2)
(1)
24
40
20
22
20
0
0
20
40
60
80
100
120
PL (W)
140
0
VDS = 50 V; f = 108 MHz; tp = 100 s;  = 20 %.
20
40
(1) IDq = 20 mA
(2) IDq = 40 mA
(2) IDq = 40 mA
(3) IDq = 100 mA
(3) IDq = 100 mA
(4) IDq = 200 mA
(4) IDq = 200 mA
(5) IDq = 300 mA
(5) IDq = 300 mA
(6) IDq = 400 mA
(6) IDq = 400 mA
(7) IDq = 500 mA
Product data sheet
100
120
PL (W)
140
(7) IDq = 500 mA
Power gain as a function of output power;
typical values
BLP05H6110XR
80
VDS = 50 V; f = 108 MHz; tp = 100 s;  = 20 %.
(1) IDq = 20 mA
Fig 8.
60
Fig 9.
Drain efficiency as a function of output power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
8 of 14
BLP05H6110XR
Power LDMOS transistor
aaa-018383
30
Gp
(dB)
aaa-018384
80
(7)
ηD
(%)
(6)
(5)
(4)
(3)
(2)
(1)
28
60
26
40
24
(3)
(2)
(1)
(4)
20
(5)
22
(6)
(7)
20
0
0
20
40
60
80
100
120
PL (W)
140
IDq = 40 mA; f = 108 MHz; tp = 100 s;  = 20 %.
0
20
(1) VDS = 50 V
(2) VDS = 45 V
(2) VDS = 45 V
(3) VDS = 40 V
(3) VDS = 40 V
(4) VDS = 35 V
(4) VDS = 35 V
(5) VDS = 30 V
(5) VDS = 30 V
(6) VDS = 25 V
(6) VDS = 25 V
Product data sheet
80
100
120
PL (W)
140
(7) VDS = 20 V
Fig 10. Power gain as a function of output power;
typical values
BLP05H6110XR
60
IDq = 40 mA; f = 108 MHz; tp = 100 s;  = 20 %.
(1) VDS = 50 V
(7) VDS = 20 V
40
Fig 11. Drain efficiency as a function of output power;
typical values
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
9 of 14
BLP05H6110XR
Power LDMOS transistor
8. Package outline
HSOP4F: plastic, heatsink small outline package; 4 leads(flat)
SOT1223-2
D
E
X
c
B
D3
A
E3
y
v
HE
A
D1
D2
b
w
4
B
3
F (4x)
(8x) METAL
PROTRUSIONS (SOURCE)
e4
(2x)
e3
(2x)
E2
E1
A
A2
A1
pin 1 index
Q1
detail X
1
2
e1 (2x)
e2 (2x)
e
Q1
0
10 mm
scale
Dimensions (mm are the original dimensions)
Unit
max
nom
min
mm
A
A1
3.9
0.2
0.1
0
A2
b
c
D(1)
D1
D2
D3
E(1)
E1
E2
E3
e
e1
e2
e3
e4
3.65 3.90 0.27 20.62 19.00 16.05 20.44 10.01 8.18 5.89 9.83
3.60 3.85 0.22 20.57 18.95 16.00 20.39 9.96 8.13 5.84 9.78 8.85 8.45 9.55 2.97 4.07
3.55 3.80 0.17 20.52 18.90 15.95 20.34 9.91 8.08 5.79 9.73
Note
1. Package body dimensions “D and “E do not include mold and metal protrusions. Allowable protrusion is 0.25 mm per side.
2. Lead width dimension “b does not include dambar protrusions. Allowable dambar protrusion is 0.25 mm in total per lead.
Outline
version
v
References
IEC
JEDEC
JEITA
w
1.62
1.57 0.25 0.25
1.52
European
projection
F
y
0.1
HE
16.16
0.4 15.96
15.76
sot1223-2_po
Issue date
15-01-12
15-06-04
SOT1223-2
Fig 12. Package outline SOT1223-2 (HSOP4F)
BLP05H6110XR
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
10 of 14
BLP05H6110XR
Power LDMOS transistor
9. Handling information
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
10. Abbreviations
Table 12.
Abbreviations
Acronym
Description
CW
Continuous Wave
ESD
ElectroStatic Discharge
HF
High Frequency
LDMOS
Laterally Diffused Metal-Oxide Semiconductor
MTF
Median Time to Failure
SMD
Surface Mounted Device
UIS
Unclamped Inductive Switching
VSWR
Voltage Standing-Wave Ratio
11. Revision history
Table 13.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BLP05H6110XR v.3
20160203
Product data sheet
-
BLP05H6110XR#2
Modifications
•
•
•
•
•
•
•
•
•
•
•
Section 1.2 on page 1: section updated
Table 5 on page 2: table updated
Figure 1 on page 3: figure added
Table 8 on page 4: table updated
Figure 2 on page 4: figure added
Figure 3 on page 5: figure updated
Table 9 on page 5: table updated
Table 10 on page 5: table updated
Figure 4 on page 5: figure added
Section 7.4 on page 6: section added
Section 7.5 on page 7: section added
BLP05H6110XR#2
20150901
Objective data sheet
-
BLP05H6110XR v.1
BLP05H6110XR v.1
20150518
Objective data sheet
-
-
BLP05H6110XR
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
11 of 14
BLP05H6110XR
Power LDMOS transistor
12. Legal information
12.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.ampleon.com.
12.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Ampleon does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local Ampleon sales office. In
case of any inconsistency or conflict with the short data sheet, the full data
sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Ampleon and its customer, unless Ampleon and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be valid
in which the Ampleon product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
12.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, Ampleon does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. Ampleon takes no responsibility for
the content in this document if provided by an information source outside of
Ampleon.
In no event shall Ampleon be liable for any indirect, incidental, punitive,
special or consequential damages (including - without limitation - lost profits,
lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Ampleon’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
Terms and conditions of commercial sale of Ampleon.
Right to make changes — Ampleon reserves the right to make changes to
information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Suitability for use — Ampleon products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction of an
BLP05H6110XR
Product data sheet
Ampleon product can reasonably be expected to result in personal injury,
death or severe property or environmental damage. Ampleon and its
suppliers accept no liability for inclusion and/or use of Ampleon products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. Ampleon makes no representation
or warranty that such applications will be suitable for the specified use without
further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Ampleon products, and Ampleon accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Ampleon product is suitable and
fit for the customer’s applications and products planned, as well as for the
planned application and use of customer’s third party customer(s). Customers
should provide appropriate design and operating safeguards to minimize the
risks associated with their applications and products.
Ampleon does not accept any liability related to any default, damage, costs or
problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Ampleon products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Ampleon does not accept any
liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — Ampleon products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.ampleon.com/terms, unless otherwise agreed in a valid written
individual agreement. In case an individual agreement is concluded only the
terms and conditions of the respective agreement shall apply. Ampleon
hereby expressly objects to applying the customer’s general terms and
conditions with regard to the purchase of Ampleon products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
12 of 14
BLP05H6110XR
Power LDMOS transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific Ampleon product is automotive qualified, the product
is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Ampleon
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without Ampleon’ warranty of the product for such
automotive applications, use and specifications, and (b) whenever customer
uses the product for automotive applications beyond Ampleon’ specifications
such use shall be solely at customer’s own risk, and (c) customer fully
indemnifies Ampleon for any liability, damages or failed product claims
resulting from customer design and use of the product for automotive
applications beyond Ampleon’ standard warranty and Ampleon’ product
specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
12.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
Any reference or use of any ‘NXP’ trademark in this document or in or on the
surface of Ampleon products does not result in any claim, liability or
entitlement vis-à-vis the owner of this trademark. Ampleon is no longer part of
the NXP group of companies and any reference to or use of the ‘NXP’
trademarks will be replaced by reference to or use of Ampleon’s own
trademarks.
13. Contact information
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
BLP05H6110XR
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 3 — 3 February 2016
© Ampleon Netherlands B.V. 2016. All rights reserved.
13 of 14
BLP05H6110XR
Power LDMOS transistor
14. Contents
1
1.1
1.2
1.3
2
3
4
5
6
7
7.1
7.2
7.3
7.4
7.5
7.5.1
8
9
10
11
12
12.1
12.2
12.3
12.4
13
14
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 2
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ruggedness in class-AB operation . . . . . . . . . 4
Impedance information . . . . . . . . . . . . . . . . . . . 5
UIS avalanche energy . . . . . . . . . . . . . . . . . . . 5
Test circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Graphical data . . . . . . . . . . . . . . . . . . . . . . . . . 7
1-Tone CW pulsed . . . . . . . . . . . . . . . . . . . . . . 7
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10
Handling information. . . . . . . . . . . . . . . . . . . . 11
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contact information. . . . . . . . . . . . . . . . . . . . . 13
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© Ampleon Netherlands B.V. 2016.
All rights reserved.
For more information, please visit: http://www.ampleon.com
For sales office addresses, please visit: http://www.ampleon.com/sales
Date of release: 3 February 2016
Document identifier: BLP05H6110XR
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement