Allied Telesis | AT-8100S/24C | 8100S Copper Series

8100S Copper Series
Switches
product information
8100S Copper Series
Layer 2–4 Fast Ethernet Stackable Switches
8100S is a series of Layer 2–4 24- and 48-port Fast Ethernet
stackable copper switches. PoE switch versions support IEEE
802.3at (PoE+) 30W standard.
The 8100S Series provides high
performance Layer 2–4 switching in an
affordable fixed configuration stackable
platform.
AT-8100S/24 and AT-8100S/24POE
switches offer 24 10/100TX ports,
two Gigabit combo ports, plus
two integrated dedicated stacking
connectors that deliver a total of
10Gbps stacking bandwidth to each
switch.
The AT-8100S/48 and AT-8100S/48POE
switch offers 48 10/100TX ports,
two Gigabit combo ports, plus
two integrated dedicated stacking
connectors that deliver a total of
10Gbps stacking bandwidth to each
switch.
Hardware Stacking
The stacking capability integrated into
this platform is configured as a resilient
ring topology designed to provide high
reliability and simplified management for
higher port density applications. Up to
eight switches of either 24 or 48 variants
can be stacked together using HDMI
cables, providing up to 384 ports of Fast
Ethernet connectivity, all manageable as
a single IP entity.
alliedtelesis.com
Management Stacking
Enhanced Stacking provides CLI-based
management of up to 24 switches
with the same effort as for one switch.
The Allied Telesis solution uses open
standard Ethernet interfaces as stacking
links so that many switches within the
same LAN and VLAN can be remotely
managed as a single IP entity across
different sites.
Key Features
All the QoS Needed in the Wiring Closet for
Today’s Voice and Data Networking
Easy, Well Known Management
»»Industry standard AlliedWare Plus™ CLI
»»Simple, intuitive, full featured Allied Telesis Web
Interface
»»Secure, encrypted Web and CLI management with
SSHv2 and SSL
»»SNMP
»»Two levels of access privileges
Affordable, Truly Stackable Switching Platform
»»Single IP address stack management
»»10Gig resilient ring stacking architecture
»»Across stack link aggregation
»»Across stack VLAN configuration
»»Across stack port mirroring
»»Redundant standby stack master
»»Stackable up to eight devices
Power Supply Redundancy
»»Integrated dual AC power supplies on all »
8100S models except AT-8100S/24C switches
»»Optional DC power versions available on »
AT-8100S/24 and AT-8100S/48 switches
Power over Ethernet
»»Provides standards-based IEEE 802.3at Power over
Ethernet to all 24 10/100TX ports or 48 10/100TX
ports
»»Support for up to 24 class 3 powered devices at 15.4
Watts on AT-8100S/24POE and AT-8100S/48POE
»»Support for up to 12 class 4 powered devices at 30
Watts on AT-8100S/24POE and AT-8100S/48POE
»»Eight priority queues
»»IEEE 802.1p for Layer 2 QoS
»»DSCP (DiffServ) for Layer 3 QoS
»»IEEE 802.1p to DSCP remarking traffic ready for
transport to the Layer 3 core of the network
»»Layer 2 and Layer 4 Access Control List (ACL)
»»Voice VLAN
»»Automatic QoS
Securing the Network at its
Most Vulnerable Point
»»IEEE 802.1x and RADIUS network login: for advanced
control for user authentication and accountability
»»Guest VLAN: to ensure visitors or unauthorized
users only connect to services defined by IT such as
Internet services
»»Dynamic VLAN
»»TACACS+: for ease of management security
administration
»»Port MAC address security options
Access Control Lists
»»Access Control Lists enable inspection of incoming
frames and classify them based on various criteria.
Specific actions can then be applied to these frames
in order to more effectively manage the network
traffic at Layer 2 through Layer 4. Typically ACLs are
used as a security mechanism, either permitting or
denying entry (hence the name Access Control) for
frames in a group, but ACLs can also be applied to
QoS.
Layer 3
»»Static routing
»»RIPv1 and RIPv2
»»Proxy ARP
8100S Copper Series | Layer 2–4 Fast Ethernet Stackable Switches
Environmentally Friendly
In keeping with our commitment to
environmentally friendly processes and
products, the 8100S Series is a new
green range of Fast Ethernet Layer 2–4
products designed to reduce power
consumption, minimize
hazardous waste
and reduce acoustic
noise. Features include the use of high
efficiency power supplies and low power
chip sets, and reduced power drive over
short cable lengths. The switches also
include an eco-friendly button on the
front panel allowing you to conserve
additional power by turning off all
diagnostic LED indicators when they are
not required.
Low Power Consumption with
Silent Operation
The AT-8100S/24C, AT-8100S/24 and
AT-8100S/48 products are designed for
silent operation, allowing them to be
used in office environments as well as
wiring closets.
Ideal Branch Office and
Wiring Closet Connectivity
Powerful line rate performance and
stackability make this switch ideal for
branch offices or the wiring closet of
larger offices. The state-of-the-art QoS
capability of this product ensures reliable
delivery of advanced network services
such as voice while effectively controlling
the continually increasing traffic
needs found in today’s networks. The
switch is able to automatically configure
a dedicated voice VLAN when an IP
phone is connected to a port. AutoQoS
enables advanced networking features at
the edge without complex configuration.
Easy Access Networking
Featuring the industry standard
Command Line Interface (CLI) of
AlliedWare Plus and Allied Telesis’
alliedtelesis.com
intuitive featured Web interface, the
advanced features of the 8100S Series
are accessible to a wide range of system
administrators. The well known CLI
and Web interfaces significantly reduce
learning time and minimize the cost of
deployment.
Securing the Network Edge
To ensure the protection of your data, it
is important to control access to your
network. Protocols such as IEEE 802.1x
port-based authentication guarantee
that only known users are connected
to the network. Unknown users who
physically connect can be isolated to a
pre-determined part of your network,
offering guests such benefits as Internet
access while ensuring the integrity of your
private network data. The switch is also
fully compliant with Microsoft Network
Access Protection (NAP) and Symantec
Network Access Control (SNAC).
Gigabit and Fast Ethernet
SFP Support
All switches in the 8100S Series support
both Gigabit and Fast Ethernet Small
Form-factor Pluggables (SFPs). This
makes the 8100S Series an ideal family
for environments where Gigabit fiber
switches will be phased in over time.
The 8100S Series allows for connectivity
to the legacy 100FX hardware until it is
upgraded to Gigabit.
IPv6 Aware Switch
In addition to the extensive IPv6
management support, the 8100S Series
functions as a Layer 2 switch in a pure
IPv6 network as well as in a combined
IPv4/IPv6 dual stack network. The
system is IPv6-aware and is capable of
bridging IPv6 Ethernet packets. This is
done with no user configuration. IPv6
packets are bridged regardless of any
extension headers that may exist.
VLAN Double Tagging (Q-in-Q)
VLAN double-tagging can be useful
for customers such as Internet Service
Providers (ISP), allowing them to use
VLANs internally while mixing traffic
from clients that are already VLAN
tagged. The first VLAN tag is used by
the ISP to route traffic across their own
network, while the second VLAN tag is
that of the end-user customer. The use
of this feature allows end-users to have
physically distributed networks, which
they can manage themselves, carried
over an independent infrastructure.
sFlow
sFlow is an industry-standard technology
for monitoring high-speed switched
networks. It gives complete visibility
into the use of networks enabling
performance optimization, accounting
and billing for usage, and defense against
security threats. Sampled packets sent
to a collector ensure sFlow always
maintains a real-time view of network
traffic.
Layer 3 Routing
The switch provides static IPv4 routing
at the edge of the network as well as
support for RIPv1 and RIPv2.
Redundant Power Options
All variants of the 8100S copper switch
family, except the AT-8100S/24C switch
feature two internal power supplies as
standard, ensuring continuous switch
operation of both the switch and the
PoE power - even in the event of a
power supply failure. 48vDC powered
versions can be ordered for the
AT-8100S/24 and AT-8100S/48 models.
All models are designed for front-toback cooling.
8100S Copper Series | Layer 2–4 Fast Ethernet Stackable Switches
Servers
x600-48Ts/XP
Layer 3 Stackable Switch
LACP
Network Printers
8100S Series
Hardware Stacking
Expandable to
384 Ports
Desktop PCs
HDMI Stacking
Interface
ERA
CAM
Wireless Laptops
IP Phones
ERA
CAM
Surveillance Cameras
WR2304N
Wireless Router
Cell Phones
with WiFi
alliedtelesis.com
8100S Copper Series | Layer 2–4 Fast Ethernet Stackable Switches
System Capacity
128MB RAM
16MB flash memory
16K MAC addresses
Forwarding rates:
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/48
AT-8100S/48POE
27.9Mpps
27.9Mpps
27.9Mpps
35.1Mpps
35.1Mpps
TFTP boot support
Temperature threshold alert
266MHz CPU
Switching Capacity
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/48
AT-8100S/48POE
18.8Gbps
18.8Gbps
18.8Gbps
23.6Gbps
23.6Gbps
Maximum Bandwidth
Non-blocking for all packet sizes
Wirespeed Switching (Layer 2/3) on all
Ethernet Ports
14,880pps for 10Mbps Ethernet
148,800pps for 100Mbps Ethernet
1,488,000pps for 1000Mbps Ethernet
Environmental Specifications
Operating temperature: 0ºC to 40ºC
Storage temperature: -25ºC to 70ºC
Operating humidity: 5% to 80% non-condensing
Storage humidity: 5% to 95% non-condensing
Max operating altitude: 3,048 m (10,000 ft)
Port Configuration
Auto-negotiation, duplex, MDI/MDI-X, IEEE 802.3x flow
control/back pressure
Head of Line (HOL) blocking prevention
Broadcast storm control
Bad cable detection
Redundant master/slave management
Link flap protection
Group link control
Port mirroring (remote option)
Ethernet Specifications
RFC 894 Ethernet II encapsulation
IEEE 802.1D MAC bridges
IEEE 802.1Q Virtual LANs
IEEE 802.2 Logical link control
IEEE 802.3ac VLAN TAG
IEEE 802.3ad (LACP) link aggregation
IEEE 802.3u 100TX
IEEE 802.3x Full-duplex operation
IEEE 802.3z Gigabit Ethernet
IEEE 802.3af Power over Ethernet class 3
IEEE 802.3at Power over Ethernet class 4
Jumbo frames (9216 bytes)
Quality of Service (QoS)
Eight egress queues per port
Ingress rate limiting
Egress rate control (shaping)
Voice VLAN
Automatic QoS
Head of Line (HOL) blocking prevention
IEEE 802.1p Class of Service with strict and weighted round
robin scheduling/strict priority scheduling
RFC 2474 DSCP for IP-based QoS
RFC 2475 Differentiated services architecture
Layer 2, 3 and 4 criteria
IEEE 802.1Q priority remarking
alliedtelesis.com
Spanning-Tree Protocol
IEEE 802.1D Spanning-Tree Protocol
IEEE 802.1w Rapid Spanning-Tree Protocol
IEEE 802.1s Multiple Spanning-Tree Protocol (15 instances)
BPDU guard
Loop guard
Management
RFC 854 Telnet server
Console management port
AlliedWare Plus CLI
Web GUI
RFC 1866 HTML
RFC 2068 HTTP
RFC 2616 HTTPS
RFC 1350 TFTP client
Xmodem
RFC 1305 NTP
RFC 1155 MIB
RFC 1157 SNMPv1
RFC 1901 SNMPv2
RFC 3411 SNMPv3
RFC 1757 RMON 4 groups: Stats, History, Alarms and Events
RFC 3164 Syslog protocol
IEEE 802.3 MAUs
Event log
RFC 3176 sFlow
MIB Support
RFC 1213 MIB-II
RFC 1215 TRAP MIB
RFC 1493 Bridge MIB
RFC 2863 Interfaces group MIB
RFC 1643 Ethernet-like MIB
RFC 2618 RMON MIB
RFC 2674 IEEE 802.1Q MIB
RFC 2096 IP forwarding table MIB
RFC 3768 VRRP MIB
Allied Telesis enterprise MIB
VLAN
4096 VLANs (IEEE 802.1Q)
Port-based VLANs
MAC-based VLANs – 1K
IP subnet-based VLANs – 256
Private VLANs
GARP VLAN Registration Protocol (GVRP)
IEEE 802.1ad double VLAN Tagging (Q-in-Q)
Link Aggregation
IEEE 802.3ad LACP
Port trunking up to eight per trunk, 32 groups
Link Discovery
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
Link Layer Discovery Protocol-Media Endpoint (LLDP-MED)
General Protocols
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 950 Subnetting, ICMP
RFC 1027 Proxy ARP
RFC 1035 DNS
RFC 1122 Internet host requirements
DHCP client
DHCP snooping
DHCP option 82
RFC 3046 DHCP relay agent information option
RFC 951 BootP
IP Multicast
RFC 1112 IGMPv1 snooping
RFC 2236 IGMPv2 snooping
RFC 3376 IGMPv3 snooping
IGMP snooping querier
Multicast groups – 1024
Multicast VLAN Registration (MVR)
Security / IEEE 802.1x
TACACS+
RFC 2865 RADIUS client
RFC 2866 RADIUS accounting
IEEE 802.1x port-based Network Access Control (NAC)
Supplicant
Authenticator
IEEE 802.1x multiple supplicant mode
Piggy-back mode
Per port MAC address limiting
Per port MAC address filtering
MAC address security/lockdown
RFC 1321 MD-5
EAP, EAP-TLS, LEAP, PEAP, TTLS
Dynamic VLANs
Guest VLANs
Secure VLANs
Layer 2/3/4/ Access Control Lists (ACLs)
2K ACL rules
ACLs based on:
- Ethernet frame type
- MAC address/VLAN ID/IEEE 802.1p
- Layer 2/3 protocol
- IP subnet/address/ToS/DSCP
- UDP/TCP port/flag
SSLv3 for Web management
SSL sessions – 10
Telnet sessions – 10
SSH sessions – 10
Microsoft NAP compliant
Symantec NAC support
Web authentication
IPv6
IPv6 host
IPv6 ACL
RFC 2463 ICMPv6
Dual-stack IPv4/IPv6 protocol
IPv6 network management
IPv6 applications: WEB/SSL, Telnet server/SSH, »
management ACLs
IP Routing
Static IPv4 routing – 8K
RIPv1, v2
Proxy ARP
Stacking Features
10Gbps stacking bandwidth via dedicated HDMI stacking
ports
Stack up to eight units using HDMI stacking ports or stack up
to 24 units using Enhanced Stacking
Single system appearance
Single IP management
Backup master
Link aggregation / trunking across stack
Port mirroring across stack
VLAN across stack
Maximum HDMI stacking cable length 1m
8100S Copper Series | Layer 2–4 Fast Ethernet Stackable Switches
Compliance Standards
IEEE 802.3 – 10T
IEEE 802.3u – 100TX with auto-negotiation
IEEE 802.3ab – 1000T Gigabit Ethernet
100FX SFP support
1000X SFP support
Safety and Electromagnetic Emissions
Certifications
EMI: FCC class A, CISPR 22 class A, EN55022 class A,
C-TICK, VCCI
Immunity: EN55024, EN61000-3-2 and EN61000-3-3
Safety: UL 60950 (cULus), EN60950-1 (TUV)
RoHS Standards
Compliant with European and China RoHS standards
Package Description
AT-8100S/xx switch
AC power cord
Management cable (RJ-45 to DB-9)
Rubber feet for desktop installation and 19” rack mountable
hardware kit accessories
Install Guide and CLI users guide available at alliedtelesis.com
HDMI stacking cable (1 meter)
Quality and Reliability
Physical Specifications
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/48
AT-8100S/48POE
Dimensions (WxDxH)
33 x 22.8 x 4.3 cm
13 x 8 x 1.72 in
44 x 29.1 x 4.3 cm
17.34 x 14.46 x 1.72 in
44 x 29.1 x 4.3 cm
17.34 x 14.46 x 1.72 in
44 x 29.1 x 4.3 cm
17.34 x 14.46 x 1.72 in
44 x 29.1 x 4.3 cm
17.34 x 14.46 x 1.72 in
Product Weight
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/48
AT-8100S/48POE
IEEE 802.3af
class 3
24 ports
24 ports
IEEE 802.3af
class 4
12 ports
12 ports
IEEE 802.3af (mode B)
IEEE 802.3at (mode B)
Mode B PoE carries PoE power to powered devices on spare
pairs 4/5 and 7/8 of Ethernet interface
alliedtelesis.com
Power Characteristics
Voltage: 100-240V AC (10% auto-ranging)
Frequency: 47-63Hz
Power Consumption
Standard product with single AC power supply
AT-8100S/24
Standard product with single AC power supply or
optional dual power supply
15.11W
18.69W
AT-8100S/24POE
401.83W
AT-8100S/48
24.84W
AT-8100S/48POE
441.98W
Standard product with dual AC power supply
Standard product with dual AC power supply
Standard product with dual AC power supply
0dB (fanless)
0dB (fanless)
61.5dB
0dB (fanless)
61.9dB
Power over Ethernet Specifications
Available Power over Ethernet: 385W (using two PSU)
AT-8100S/24POE
AT-8100S/48POE
MTBF
510,000
430,000
70,000
300,000
61,000
AT-8100S/24C
Weight (kg/lbs)
2.15 kg / 4.75 lb
3.62 kg / 8.1 lb
4.96 kg / 10.98 lb
4.03 kg / 8.9 lb
5.42 kg / 11.95 lb
Acoustic Noise
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/48
AT-8100S/48POE
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/48
AT-8100S/48POE
Latency
AT-8100S/24C
AT-8100S/24
AT-8100S/24POE
AT-8100S/48
AT-8100S/48POE
10Mbit
81.927µs
81.862µs
80.138µs
80.197µs
80.296µs
100Mbit
11.567µs
11.437µs
12.121µs
11.672µs
11.691µs
8100S Copper Series | Layer 2–4 Fast Ethernet Stackable Switches
Ordering Information
8100S Stackable Fast Ethernet Copper
Switches
AT-8100S/24C-xx
24 x 10/100TX RJ-45 ports
2 combo ports (2 x 10/100/1000T RJ-45 ports or
2 x 100/1000 SFP ports)
2 x HDMI stacking ports
Internal single AC power supply
Small Form Pluggable Optics Modules
AT-SPSX
SFP, MMF, 1000Mbps, 220 / 500 m, 850 nm, LC
AT-SPEX
SFP, MMF, 1000Mbps, 2 km, 1310 nm, LC
AT-8100S/24-xx
24 x 10/100TX RJ-45 ports
2 combo ports (2 x 10/100/1000T RJ-45 ports or
2 x 100/1000 SFP ports)
2 x HDMI stacking ports
Internal dual AC power supplies or optional DC power
supplies
AT-SPLX10
SFP, SMF, 1000Mbps, 10 km, 1310 nm, LC
AT-8100S/24POE-xx
24 x 10/100TX PoE RJ-45 ports
2 combo ports (2 x 10/100/1000T RJ-45 ports or
2 x 100/1000 SFP ports)
2 x HDMI stacking ports
Internal dual AC power supplies
AT-SPZX80
SFP, SMF, 1000Mbps, 80 km, 1550 nm, LC
AT-8100S/48-xx
48 x 10/100TX RJ-45 ports
2 combo ports (2 x 10/100/1000T RJ-45 ports or
2 x 100/1000 SFP ports)
2 x HDMI stacking ports
Internal dual AC power supplies or optional DC power
supplies
AT-8100S/48POE-xx
48 x 10/100TX PoE RJ-45 ports
2 combo ports (2 x 10/100/1000T RJ-45 ports or
2 x 100/1000 SFP ports)
2 x HDMI stacking ports
Internal dual AC power supplies
Where xx =
10 for US power cord
20 for no power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord»
80 for DC power supply »
(AT-8100S/24 and AT-8100S/48)
AT-SPLX40
SFP, SMF, 1000Mbps, 40 km, 1310 nm, LC
AT-SPBD10-13
SFP, SMF, 1000Mbps, 10 km, 1310/1490 nm,
LC-BiDi
AT-SPBD10-14
SFP, SMF, 1000Mbps, 10 km, 1490/1310 nm,
LC-BiDi
AT-SPFX/2
SFP, MMF, 100Mbps, 2 km, 1310 nm, LC
AT-SPFXBD-LC-13
SFP, SMF, 100Mbps, 10 km, 1310/1510 nm, LC-BiDi
AT-SPFXBD-LC-15
SFP, SMF, 100Mbps, 10 km, 1510/1310 nm, LC-BiDi
AT-SPFX/15
SFP, SMF, 100Mbps, 15 km, 1310 nm, LC
Americas Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
alliedtelesis.com
© 2011 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-000402 Rev.A
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising